From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/9] pata_sil680: CodingStyle fixes
Date: Sat, 30 Jan 2010 20:49:31 +0100 [thread overview]
Message-ID: <20100130194931.30779.16562.sendpatchset@localhost> (raw)
In-Reply-To: <20100130194918.30779.25485.sendpatchset@localhost>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_sil680: CodingStyle fixes
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ata/pata_sil680.c | 58 ++++++++++++++++++++++++++--------------------
1 file changed, 33 insertions(+), 25 deletions(-)
Index: b/drivers/ata/pata_sil680.c
===================================================================
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -81,7 +81,8 @@ static unsigned long sil680_seldev(struc
* space for us.
*/
-static int sil680_cable_detect(struct ata_port *ap) {
+static int sil680_cable_detect(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long addr = sil680_selreg(ap, 0);
u8 ata66;
@@ -175,7 +176,7 @@ static void sil680_set_dmamode(struct at
mode &= ~(0x03 << port_shift);
/* Extract scsc */
- scsc = (scsc & 0x30) ? 1: 0;
+ scsc = (scsc & 0x30) ? 1 : 0;
if (adev->dma_mode >= XFER_UDMA_0) {
multi = 0x10C1;
@@ -214,7 +215,7 @@ static u8 sil680_init_chip(struct pci_de
{
u8 tmpbyte = 0;
- /* FIXME: double check */
+ /* FIXME: double check */
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
pdev->revision ? 1 : 255);
@@ -232,22 +233,22 @@ static u8 sil680_init_chip(struct pci_de
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
- switch(tmpbyte & 0x30) {
- case 0x00:
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
- break;
- case 0x30:
- /* if clocking is disabled */
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
- break;
- case 0x10:
- /* 133 already */
- break;
- case 0x20:
- /* BIOS set PCI x2 clocking */
- break;
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+ break;
+ case 0x30:
+ /* if clocking is disabled */
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+ break;
+ case 0x10:
+ /* 133 already */
+ break;
+ case 0x20:
+ /* BIOS set PCI x2 clocking */
+ break;
}
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
@@ -265,12 +266,19 @@ static u8 sil680_init_chip(struct pci_de
pci_write_config_dword(pdev, 0xB8, 0x43924392);
pci_write_config_dword(pdev, 0xBC, 0x40094009);
- switch(tmpbyte & 0x30) {
- case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
- case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
- case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
- /* This last case is _NOT_ ok */
- case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ printk(KERN_INFO "sil680: 100MHz clock.\n");
+ break;
+ case 0x10:
+ printk(KERN_INFO "sil680: 133MHz clock.\n");
+ break;
+ case 0x20:
+ printk(KERN_INFO "sil680: Using PCI clock.\n");
+ break;
+ /* This last case is _NOT_ ok */
+ case 0x30:
+ printk(KERN_ERR "sil680: Clock disabled ?\n");
}
return tmpbyte & 0x30;
}
next prev parent reply other threads:[~2010-01-30 19:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-30 19:49 [PATCH 0/9] few more ide2libata patches Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 1/9] pata_cs5536: forward port changes from cs5536 Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` Bartlomiej Zolnierkiewicz [this message]
2010-01-30 19:49 ` [PATCH 3/9] siimage: cleanup I/O helpers Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 4/9] [ata_]piix: move documentation to ata_piix.h Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 5/9] ide2libata: add missing credits Bartlomiej Zolnierkiewicz
2010-01-30 19:49 ` [PATCH 6/9] pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 7/9] cs5536: convert to ide2libata Bartlomiej Zolnierkiewicz
2010-01-30 21:55 ` Jeff Garzik
2010-01-31 0:30 ` Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 8/9] pata_sil680: move code to be re-used by ide2libata to pata_sil680.h Bartlomiej Zolnierkiewicz
2010-01-30 19:50 ` [PATCH 9/9] siimage: convert to ide2libata Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100130194931.30779.16562.sendpatchset@localhost \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox