From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Hugh Dickins <hugh.dickins@tiscali.co.uk>,
Mel Gorman <mel@csn.ul.ie>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [28/74] mm: fix migratetype bug which slowed swapping
Date: Thu, 04 Feb 2010 09:11:59 -0800 [thread overview]
Message-ID: <20100204171504.319037841@linux.site> (raw)
In-Reply-To: <20100204171850.GA16539@kroah.com>
2.6.32-stable review patch. If anyone has any objections, please let us know.
------------------
From: Hugh Dickins <hugh.dickins@tiscali.co.uk>
commit a7016235a61d520e6806f38129001d935c4b6661 upstream.
After memory pressure has forced it to dip into the reserves, 2.6.32's
5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu
list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE
pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves.
Fix that in the most straightforward way (which, considering the overheads
of alternative approaches, is Mel's preference): the right migratetype is
already in page_private(page), but free_pcppages_bulk() wasn't using it.
How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild
swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that
commit was easy, but explaining the magnitude of the slowdown not easy.
The same effect appears, but much less markedly, with SLAB, and even
less markedly on other machines (the PowerMac divides into fewer zones
than x86, I think that may be a factor). We guess that lumpy reclaim
of short-lived high-order pages is implicated in some way, and probably
this bug has been tickling a poor decision somewhere in page reclaim.
But instrumentation hasn't told me much, I've run out of time and
imagination to determine exactly what's going on, and shouldn't hold up
the fix any longer: it's valid, and might even fix other misbehaviours.
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
mm/page_alloc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -559,8 +559,9 @@ static void free_pcppages_bulk(struct zo
page = list_entry(list->prev, struct page, lru);
/* must delete as __free_one_page list manipulates */
list_del(&page->lru);
- __free_one_page(page, zone, 0, migratetype);
- trace_mm_page_pcpu_drain(page, 0, migratetype);
+ /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
+ __free_one_page(page, zone, 0, page_private(page));
+ trace_mm_page_pcpu_drain(page, 0, page_private(page));
} while (--count && --batch_free && !list_empty(list));
}
spin_unlock(&zone->lock);
next prev parent reply other threads:[~2010-02-04 17:32 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-04 17:18 [00/74] 2.6.32.8-stable review Greg KH
2010-02-04 17:11 ` [01/74] [SCSI] scsi_lib: Fix bug in completion of bidi commands Greg KH
2010-02-04 17:11 ` [02/74] [SCSI] mptsas: Fix issue with chain pools allocation on katmai Greg KH
2010-02-04 17:11 ` [03/74] mm: add new read_cache_page_gfp() helper function Greg KH
2010-02-04 17:11 ` [04/74] drm/i915: Selectively enable self-reclaim Greg KH
2010-02-04 17:11 ` [05/74] firewire: ohci: fix crashes with TSB43AB23 on 64bit systems Greg KH
2010-02-04 17:11 ` [06/74] S390: fix single stepped svcs with TRACE_IRQFLAGS=y Greg KH
2010-02-04 17:11 ` [07/74] x86: Set hotpluggable nodes in nodes_possible_map Greg KH
2010-02-04 17:11 ` [08/74] x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Greg KH
2010-02-04 17:11 ` [09/74] libata: retry FS IOs even if it has failed with AC_ERR_INVALID Greg KH
2010-02-04 17:11 ` [10/74] [S390] zcrypt: Do not remove coprocessor for error 8/72 Greg KH
2010-02-04 17:11 ` [11/74] [S390] dasd: fix possible NULL pointer errors Greg KH
2010-02-11 23:15 ` Bastian Blank
2010-02-11 23:38 ` Greg KH
2010-02-04 17:11 ` [12/74] ACPI: Add a generic API for _OSC -v2 Greg KH
2010-02-04 17:11 ` [13/74] ACPI: Add platform-wide _OSC support Greg KH
2010-02-04 17:11 ` [14/74] ACPI: fix OSC regression that caused aer and pciehp not to load Greg KH
2010-02-04 17:11 ` [15/74] ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes Greg KH
2010-02-04 17:11 ` [16/74] UBI: fix volume creation input checking Greg KH
2010-02-04 17:11 ` [17/74] e1000: enhance frame fragment detection Greg KH
2010-02-04 17:11 ` [18/74] e1000e: " Greg KH
2010-02-04 17:11 ` [19/74] e1000/e1000e: dont use small hardware rx buffers Greg KH
2010-02-04 17:11 ` [20/74] drm/i915: Reload hangcheck timer too for Ironlake Greg KH
2010-02-04 17:11 ` [21/74] Fix a leak in affs_fill_super() Greg KH
2010-02-04 17:11 ` [22/74] Fix failure exits in bfs_fill_super() Greg KH
2010-02-04 17:11 ` [23/74] fix oops in fs/9p late mount failure Greg KH
2010-02-04 17:11 ` [24/74] fix leak in romfs_fill_super() Greg KH
2010-02-04 17:11 ` [25/74] Fix remount races with symlink handling in affs Greg KH
2010-02-04 17:11 ` [26/74] fix affs parse_options() Greg KH
2010-02-04 17:11 ` [27/74] Fix failure exit in ipathfs Greg KH
2010-02-04 17:11 ` Greg KH [this message]
2010-02-04 17:12 ` [29/74] FDPIC: Respect PT_GNU_STACK exec protection markings when creating NOMMU stack Greg KH
2010-02-04 17:12 ` [30/74] Split flush_old_exec into two functions Greg KH
2010-02-04 17:12 ` [31/74] sparc: TIF_ABI_PENDING bit removal Greg KH
2010-02-04 17:12 ` [32/74] x86: get rid of the insane TIF_ABI_PENDING bit Greg KH
2010-02-04 17:12 ` [33/74] Input: winbond-cir - remove dmesg spam Greg KH
2010-02-04 17:12 ` [34/74] x86: Disable HPET MSI on ATI SB700/SB800 Greg KH
2010-02-04 17:12 ` [35/74] iwlwifi: set default aggregation frame count limit to 31 Greg KH
2010-02-04 17:12 ` [36/74] drm/i915: only enable hotplug for detected outputs Greg KH
2010-02-04 17:12 ` [37/74] firewire: core: add_descriptor size check Greg KH
2010-02-04 17:12 ` [38/74] SECURITY: selinux, fix update_rlimit_cpu parameter Greg KH
2010-02-04 17:12 ` [39/74] regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints Greg KH
2010-02-04 17:12 ` [40/74] x86: Add Dell OptiPlex 760 reboot quirk Greg KH
2010-02-04 17:12 ` [41/74] x86: Add quirk for Intel DG45FC board to avoid low memory corruption Greg KH
2010-02-04 17:12 ` [42/74] x86/amd-iommu: Fix possible integer overflow Greg KH
2010-02-04 17:12 ` [43/74] clocksource: fix compilation if no GENERIC_TIME Greg KH
2010-02-04 17:12 ` [44/74] tcp: update the netstamp_needed counter when cloning sockets Greg KH
2010-02-04 17:12 ` [45/74] sky2: Fix oops in sky2_xmit_frame() after TX timeout Greg KH
2010-02-04 17:12 ` [46/74] net: restore ip source validation Greg KH
2010-02-05 10:16 ` Sven Joachim
2010-02-04 17:12 ` [47/74] af_packet: Dont use skb after dev_queue_xmit() Greg KH
2010-02-04 17:12 ` [48/74] ax25: netrom: rose: Fix timer oopses Greg KH
2010-02-04 17:12 ` [49/74] KVM: allow userspace to adjust kvmclock offset Greg KH
2010-02-04 17:12 ` [50/74] oprofile/x86: add Xeon 7500 series support Greg KH
2010-02-04 17:12 ` [51/74] oprofile/x86: fix crash when profiling more than 28 events Greg KH
2010-02-04 17:12 ` [52/74] libata: retry link resume if necessary Greg KH
2010-02-04 17:12 ` [53/74] mm: percpu-vmap fix RCU list walking Greg KH
2010-02-04 17:12 ` [54/74] mm: purge fragmented percpu vmap blocks Greg KH
2010-02-04 17:12 ` [55/74] block: fix bio_add_page for non trivial merge_bvec_fn case Greg KH
2010-02-04 17:12 ` [56/74] Fix flush_old_exec()/setup_new_exec() split Greg KH
2010-02-04 17:12 ` [57/74] random: drop weird m_time/a_time manipulation Greg KH
2010-02-04 17:12 ` [58/74] random: Remove unused inode variable Greg KH
2010-02-04 17:12 ` [59/74] block: fix bugs in bio-integrity mempool usage Greg KH
2010-02-04 17:12 ` [60/74] usb: r8a66597-hdc disable interrupts fix Greg KH
2010-02-04 17:12 ` [61/74] connector: Delete buggy notification code Greg KH
2010-02-04 17:12 ` [62/74] be2net: Bug fix to support newer generation of BE ASIC Greg KH
2010-02-04 17:12 ` [63/74] be2net: Fix memset() arg ordering Greg KH
2010-02-04 17:12 ` [64/74] mm: flush dcache before writing into page to avoid alias Greg KH
2010-02-04 17:12 ` [65/74] mac80211: fix NULL pointer dereference when ftrace is enabled Greg KH
2010-02-04 17:12 ` [66/74] imxfb: correct location of callbacks in suspend and resume Greg KH
2010-02-04 17:12 ` [67/74] mx3fb: some debug and initialisation fixes Greg KH
2010-02-04 17:12 ` [68/74] starfire: clean up properly if firmware loading fails Greg KH
2010-02-04 17:12 ` [69/74] kernel/cred.c: use kmem_cache_free Greg KH
2010-02-04 17:12 ` [70/74] uartlite: fix crash when using as console Greg KH
2010-02-04 17:12 ` [71/74] pktcdvd: removing device does not remove its sysfs dir Greg KH
2010-02-04 17:12 ` [72/74] ath9k: fix eeprom INI values override for 2GHz-only cards Greg KH
2010-02-04 17:12 ` [73/74] ath9k: fix beacon slot/buffer leak Greg KH
2010-02-04 17:12 ` [74/74] powerpc: TIF_ABI_PENDING bit removal Greg KH
2010-02-05 7:36 ` [Stable-review] [00/74] 2.6.32.8-stable review Nikola Ciprich
2010-02-05 17:12 ` Greg KH
2010-02-07 10:26 ` Nikola Ciprich
2010-02-05 16:53 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100204171504.319037841@linux.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=hugh.dickins@tiscali.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mel@csn.ul.ie \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).