Re: [PATCH 8/9] PCI / ACPI / PM: Platform support for PCI PME wake-up (rev. 7)

[Gary Hade <garyhade@us.ibm.com>]

On Thu, Feb 11, 2010 at 09:32:02PM +0100, Rafael J. Wysocki wrote:
> On Thursday 11 February 2010, Gary Hade wrote:
> > On Thu, Feb 11, 2010 at 02:27:17PM +0100, Rafael J. Wysocki wrote:
> > > On Thursday 11 February 2010, Gary Hade wrote:
> > > > On Thu, Feb 11, 2010 at 01:56:54AM +0100, Rafael J. Wysocki wrote:
> > > > > On Thursday 11 February 2010, Rafael J. Wysocki wrote:
> > > > > > On Thursday 11 February 2010, Gary Hade wrote:
> > > > > > > On Wed, Feb 10, 2010 at 11:58:00PM +0100, Rafael J. Wysocki wrote:
> > > > > > > > On Wednesday 10 February 2010, Gary Hade wrote:
> > > > > > ...
> > > > > > > > > Yes, 6/9 also appeared to be the most likely suspect to me and
> > > > > > > > > I was already doing what you asked except in the opposite order.
> > > > > > > > > With 1/9 through 6/9 both the hot-add and hot-remove issues still
> > > > > > > > > reproduced.  After removing 6/9 both issues disappeared.
> > > > > > > > 
> > > > > > > > Thanks for verifying, I've already started to look for bugs in it.
> > > > > > > 
> > > > > > > Thanks!
> > > > > > > 
> > > > > > > > 
> > > > > > > > What's your kernel command line, BTW?
> > > > > > > 
> > > > > > > root=/dev/disk/by-id/scsi-35000c5000036ffcb-part7 ip=9.47.66.9:9.47.67.50:9.47.66.1:255.255.254.0 resume=/dev/disk/by-id/scsi-35000c50000370247-part3 crashkernel=256M-:128M console=tty0 console=ttyS0,115200 pci=use_crs pci=norom
> > > > > > 
> > > > > > Thanks.  We found a bug in the patch, but it would require you to use a
> > > > > > specific command line switch to trigger, which you don't use.
> > > > > > 
> > > > > > I'll let you know if I have anything to test.
> > > > > 
> > > > > OK, please try the patch below on top of [1-6/9].
> > > > 
> > > > Sorry, it didn't help.  The hot-add and hot-remove behaviors
> > > > still look the same.
> > > 
> > > Thanks for testing.
> > > 
> > > Well, this time I found another real bug, which is that we should add
> > > gpe_block->block_base_number to the GPE index within the block in order to
> > > compute the GPE number.  If there are GPE devices other than the FADT ones in
> > > your system, that may explain the symptoms.
> > > 
> > > Please try the patch below (on top of [1-6/9]).  In case it doesn't help, please
> > > look for "Failed to ebable GPE" messages in dmesg and let me know if there are
> > > any.
> > 
> > That one worked!  It corrected both the blinking amber LED
> > after hot-remove and acpiphp's failure to see the hot-add event.
> 
> Great!
> 
> > Now when you have patch(es) ready for Jesse's linux-next branch
> 
> Well, not quite.  I had to rework them in the meantime. ;-)
> 
> > I can get back to my original mission of checking out Bjorn's
> > _CRS enablement changes.
> 
> May I still ask you to test something?

Oh, I guess so. :)

> 
> In case I can, please try the appended patch on top of [1-3/6].  It is a
> replacement for [4-6/9] with the last fix included.

I just tried it and it seemed to work fine.

Gary

-- 
Gary Hade
System x Enablement
IBM Linux Technology Center
503-578-4503  IBM T/L: 775-4503
garyhade@us.ibm.com
http://www.ibm.com/linux/ltc