From: Ingo Molnar <mingo@elte.hu>
To: Don Zickus <dzickus@redhat.com>
Cc: linux-kernel@vger.kernel.org, peterz@infradead.org,
gorcunov@gmail.com, aris@redhat.com
Subject: Re: [PATCH 1/4] nmi_watchdog: use a boolean config flag for compiling
Date: Sun, 14 Feb 2010 19:12:19 +0100 [thread overview]
Message-ID: <20100214181219.GA27839@elte.hu> (raw)
In-Reply-To: <20100214165941.GA26329@elte.hu>
[-- Attachment #1: Type: text/plain, Size: 10782 bytes --]
i'm also getting this:
[ 11.101892] NET: Registered protocol family 5
[ 19.293996] INFO: RCU detected CPU stalls: 1 (detected by 0, t=10002 jiffies)
[ 19.293996] sending NMI to all CPUs:
[ 19.294339] NMI backtrace for cpu 0
[ 19.294339] CPU 0
[ 19.294339] Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697 A8N-E/System Product Name
[ 19.294339] RIP: 0010:[<ffffffff81009f3f>] [<ffffffff81009f3f>] native_read_tsc+0x6/0x16
[ 19.294339] RSP: 0018:ffff880003a03df8 EFLAGS: 00000046
[ 19.294339] RAX: 0000000082d602a7 RBX: ffffffff82c1aeae RCX: 0000000082d60282
[ 19.294339] RDX: 0000000000000017 RSI: 0000000000000002 RDI: 00000000001eadb1
[ 19.294339] RBP: ffff880003a03df8 R08: 0000000000000000 R09: 0000000000000003
[ 19.294339] R10: ffffffff824a65a0 R11: 0000000000000000 R12: 00000000001eadb1
[ 19.294339] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000093c70
[ 19.294339] FS: 0000000000000000(0000) GS:ffff880003a00000(0000) knlGS:0000000000000000
[ 19.294339] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 19.294339] CR2: 0000000000000000 CR3: 0000000002494000 CR4: 00000000000006f0
[ 19.294339] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 19.294339] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 19.294339] Process swapper (pid: 0, threadinfo ffffffff82400000, task ffffffff8249c020)
[ 19.294339] Stack:
[ 19.294339] ffff880003a03e28 ffffffff813e9039 00000000000004a6 ffffffff824f2000
[ 19.294339] <0> 0000000000000000 ffffffff824f2000 ffff880003a03e38 ffffffff813e8fa5
[ 19.294339] <0> ffff880003a03e48 ffffffff813e8fe4 ffff880003a03e68 ffffffff8101a1a7
[ 19.294339] Call Trace:
[ 19.294339] <IRQ>
[ 19.294339] [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI>
[ 19.294339] [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] Code: 00 e8 8d f0 3d 00 c9 c3 55 40 88 f8 48 89 e5 e6 70 e4 71 c9 c3 55 40 88 f0 48 89 e5 e6 70 40 88 f8 e6 71 c9 c3 55 48 89 e5 0f 31 <89> c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9 c3 55 48 89 e5 41
[ 19.294339] Call Trace:
[ 19.294339] <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697
[ 19.294339] Call Trace:
[ 19.294339] <NMI> [<ffffffff8100a778>] ? show_regs+0x26/0x2b
[ 19.294339] [<ffffffff8101a23c>] hw_nmi_is_cpu_stuck+0x4f/0xb7
[ 19.294339] [<ffffffff810907ab>] wd_overflow+0x43/0xc3
[ 19.294339] [<ffffffff810ad21d>] __perf_event_overflow+0x184/0x1fd
[ 19.294339] [<ffffffff810a9de1>] ? rcu_read_unlock+0x1c/0x1e
[ 19.294339] [<ffffffff810ad6ce>] perf_event_overflow+0x14/0x16
[ 19.294339] [<ffffffff810104ff>] x86_pmu_handle_irq+0x16d/0x1b6
[ 19.294339] [<ffffffff8100f4b8>] perf_event_nmi_handler+0x42/0x4f
[ 19.294339] [<ffffffff81060857>] notifier_call_chain+0x63/0x97
[ 19.294339] [<ffffffff81060ccb>] __atomic_notifier_call_chain+0x59/0x86
[ 19.294339] [<ffffffff81060c72>] ? __atomic_notifier_call_chain+0x0/0x86
[ 19.294339] [<ffffffff81060d07>] atomic_notifier_call_chain+0xf/0x11
[ 19.294339] [<ffffffff81060d37>] notify_die+0x2e/0x30
[ 19.294339] [<ffffffff81004956>] default_do_nmi+0x57/0x1ee
[ 19.294339] [<ffffffff81004b4d>] do_nmi+0x60/0x9b
[ 19.294339] [<ffffffff81b8ba60>] nmi+0x20/0x39
[ 19.294339] [<ffffffff81009f3f>] ? native_read_tsc+0x6/0x16
[ 19.294339] <<EOE>> <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] ------------[ cut here ]------------
[ 19.294339] WARNING: at kernel/nmi_watchdog.c:139 wd_overflow+0xa3/0xc3()
[ 19.294339] Hardware name: System Product Name
[ 19.294339] NMI Watchdog detected LOCKUP on cpu 0Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697
[ 19.294339] Call Trace:
[ 19.294339] <NMI> [<ffffffff8104331c>] warn_slowpath_common+0x72/0x8a
[ 19.294339] [<ffffffff81043381>] warn_slowpath_fmt+0x3c/0x3e
[ 19.294339] [<ffffffff8109080b>] wd_overflow+0xa3/0xc3
[ 19.294339] [<ffffffff810ad21d>] __perf_event_overflow+0x184/0x1fd
[ 19.294339] [<ffffffff810a9de1>] ? rcu_read_unlock+0x1c/0x1e
[ 19.294339] [<ffffffff810ad6ce>] perf_event_overflow+0x14/0x16
[ 19.294339] [<ffffffff810104ff>] x86_pmu_handle_irq+0x16d/0x1b6
[ 19.294339] [<ffffffff8100f4b8>] perf_event_nmi_handler+0x42/0x4f
[ 19.294339] [<ffffffff81060857>] notifier_call_chain+0x63/0x97
[ 19.294339] [<ffffffff81060ccb>] __atomic_notifier_call_chain+0x59/0x86
[ 19.294339] [<ffffffff81060c72>] ? __atomic_notifier_call_chain+0x0/0x86
[ 19.294339] [<ffffffff81060d07>] atomic_notifier_call_chain+0xf/0x11
[ 19.294339] [<ffffffff81060d37>] notify_die+0x2e/0x30
[ 19.294339] [<ffffffff81004956>] default_do_nmi+0x57/0x1ee
[ 19.294339] [<ffffffff81004b4d>] do_nmi+0x60/0x9b
[ 19.294339] [<ffffffff81b8ba60>] nmi+0x20/0x39
[ 19.294339] [<ffffffff81009f3f>] ? native_read_tsc+0x6/0x16
[ 19.294339] <<EOE>> <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] ---[ end trace 12a5a6fbc564882f ]---
[ 19.295052] async_waiting @ 2046
[ 19.296176] async_continuing @ 2046 after 0 usec
[ 19.298241] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 19.308341] device: 'target0:0:0': device_add
[ 19.310536] PM: Adding info for No Bus:target0:0:0
[ 19.312112] device: '0:0:0:0': device_add
[ 19.314823] bus: 'scsi': add device 0:0:0:0
[ 19.315821] PM: Adding info for scsi:0:0:0:0
[ 19.318189] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[ 19.325106] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 69083 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc8
# Sun Feb 14 21:01:32 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS_NMI=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_UP_WANTED_1 is not set
CONFIG_SMP=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_NMI_WATCHDOG=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_64=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
[-- Attachment #3: 1 --]
[-- Type: text/plain, Size: 442479 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33-rc8-tip+ (mingo@sirius) (gcc version 4.4.1 20091008 (Red Hat 4.4.1-20) (GCC) ) #16697 SMP Sun Feb 14 20:57:58 CET 2010
[ 0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[ 0.000000] 0000000000 - 003fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880004000000-ffff880004dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] early_res array is doubled to 64 at [12000 - 127ff]
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff880003a00000 s1923088 r0 d22512 u2097152
[ 0.000000] pcpu-alloc: s1923088 r0 d22512 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258431
[ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Subtract (47 early reservations)
[ 0.000000] #1 [0001000000 - 00037e0e48] TEXT DATA BSS
[ 0.000000] #2 [00037e1000 - 00037e1149] BRK
[ 0.000000] #3 [00000f5690 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000f5680 - 00000f5690] MP-table mpf
[ 0.000000] #5 [000009f800 - 00000f1400] BIOS reserved
[ 0.000000] #6 [00000f152c - 00000f5680] BIOS reserved
[ 0.000000] #7 [00000f1400 - 00000f152c] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000100000 - 0000300000] PGTABLE
[ 0.000000] #10 [00037e1180 - 00037e2180] BOOTMEM
[ 0.000000] #11 [00037e0e80 - 00037e0f40] BOOTMEM
[ 0.000000] #12 [0003fe3000 - 0003fe4000] BOOTMEM
[ 0.000000] #13 [0003fe4000 - 0003fe5000] BOOTMEM
[ 0.000000] #14 [0004000000 - 0004e00000] MEMMAP 0
[ 0.000000] #15 [00037e2180 - 0003832180] BOOTMEM
[ 0.000000] #16 [0003832180 - 0003882180] BOOTMEM
[ 0.000000] #17 [0003883000 - 0003884000] BOOTMEM
[ 0.000000] #18 [00037e0f40 - 00037e0f83] BOOTMEM
[ 0.000000] #19 [0003882180 - 0003882378] BOOTMEM
[ 0.000000] #20 [0003882380 - 00038823e8] BOOTMEM
[ 0.000000] #21 [0003882400 - 0003882468] BOOTMEM
[ 0.000000] #22 [0003882480 - 00038824e8] BOOTMEM
[ 0.000000] #23 [0003882500 - 0003882568] BOOTMEM
[ 0.000000] #24 [0003882580 - 00038825e8] BOOTMEM
[ 0.000000] #25 [0003882600 - 0003882668] BOOTMEM
[ 0.000000] #26 [0003882680 - 00038826e8] BOOTMEM
[ 0.000000] #27 [0003882700 - 0003882768] BOOTMEM
[ 0.000000] #28 [00037e0fc0 - 00037e0fe0] BOOTMEM
[ 0.000000] #29 [0003882780 - 000388281a] BOOTMEM
[ 0.000000] #30 [0003882840 - 00038828da] BOOTMEM
[ 0.000000] #31 [0003a00000 - 0003e00000] BOOTMEM
[ 0.000000] #32 [0003882900 - 0003882908] BOOTMEM
[ 0.000000] #33 [0003882940 - 0003882948] BOOTMEM
[ 0.000000] #34 [0003882980 - 0003882988] BOOTMEM
[ 0.000000] #35 [00038829c0 - 00038829d0] BOOTMEM
[ 0.000000] #36 [0003882a00 - 0003882b50] BOOTMEM
[ 0.000000] #37 [0003882b80 - 0003882c00] BOOTMEM
[ 0.000000] #38 [0003882c00 - 0003882e00] BOOTMEM
[ 0.000000] #39 [0003882e00 - 0003883000] BOOTMEM
[ 0.000000] #40 [0003884000 - 0003884200] BOOTMEM
[ 0.000000] #41 [0003884200 - 0003884400] BOOTMEM
[ 0.000000] #42 [0003884400 - 000388c400] BOOTMEM
[ 0.000000] #43 [000388c400 - 000398c400] BOOTMEM
[ 0.000000] #44 [0003e00000 - 0003e80000] BOOTMEM
[ 0.000000] #45 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #46 [000398c400 - 000398c420] BOOTMEM
[ 0.000000] 12 40 - 80 9f
[ 0.000000] 300 300 - 1000 1000
[ 0.000000] 398d 39c0 - 3a00 3a00
[ 0.000000] 3e80 3e80 - 3fc0 3fe3
[ 0.000000] 3fe5 - 4000
[ 0.000000] 4e00 4e00 - 20000 20000
[ 0.000000] 24000 24000 - 3ffc0 3fff0
[ 0.000000] Memory: 918324k/1048512k available (11831k kernel code, 452k absent, 129092k reserved, 13244k data, 2476k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] NR_IRQS:262400 nr_irqs:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ODEBUG: 9 of 9 active objects replaced
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.529 MHz processor.
[ 0.003025] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.05 BogoMIPS (lpj=2010529)
[ 0.005135] Security Framework initialized
[ 0.006010] SELinux: Initializing.
[ 0.007103] SELinux: Starting in permissive mode
[ 0.008059] Mount-cache hash table entries: 256
[ 0.010791] Initializing cgroup subsys debug
[ 0.011008] Initializing cgroup subsys ns
[ 0.012013] Initializing cgroup subsys cpuacct
[ 0.013122] tseg: 0000000000
[ 0.014022] CPU: Physical Processor ID: 0
[ 0.015004] CPU: Processor Core ID: 0
[ 0.016006] mce: CPU supports 5 MCE banks
[ 0.017021] Performance Events: AMD PMU driver.
[ 0.019011] ... version: 0
[ 0.020005] ... bit width: 48
[ 0.021004] ... generic registers: 4
[ 0.023010] ... value mask: 0000ffffffffffff
[ 0.024005] ... max period: 00007fffffffffff
[ 0.025005] ... fixed-purpose events: 0
[ 0.026005] ... event mask: 000000000000000f
[ 0.029414] Setting APIC routing to flat
[ 0.030069] ExtINT not setup in hardware but reported by MP table
[ 0.031421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.031999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.031999] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.031999] ..... (found apic 0 pin 0) ...
[ 0.042908] ....... works.
[ 0.043004] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.148027] calling migration_init+0x0/0x59 @ 1
[ 0.149185] initcall migration_init+0x0/0x59 returned 0 after 0 usecs
[ 0.150005] calling spawn_ksoftirqd+0x0/0x59 @ 1
[ 0.152049] initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 976 usecs
[ 0.153007] calling init_call_single_data+0x0/0xb1 @ 1
[ 0.154010] initcall init_call_single_data+0x0/0xb1 returned 0 after 0 usecs
[ 0.155005] calling spawn_softlockup_task+0x0/0x75 @ 1
[ 0.156139] initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs
[ 0.157005] calling spawn_nmi_watchdog_task+0x0/0x62 @ 1
[ 0.158111] initcall spawn_nmi_watchdog_task+0x0/0x62 returned 0 after 0 usecs
[ 0.159015] calling relay_init+0x0/0x14 @ 1
[ 0.160009] initcall relay_init+0x0/0x14 returned 0 after 0 usecs
[ 0.161008] calling tracer_alloc_buffers+0x0/0x1c2 @ 1
[ 0.162127] initcall tracer_alloc_buffers+0x0/0x1c2 returned 0 after 0 usecs
[ 0.163008] calling init_trace_printk+0x0/0x8 @ 1
[ 0.164007] initcall init_trace_printk+0x0/0x8 returned 0 after 0 usecs
[ 0.165395] lockdep: fixing up alternatives.
[ 0.166211] Booting Node 0, Processors #1 Ok.
[ 0.239179] Brought up 2 CPUs
[ 0.240008] Total of 2 processors activated (8040.96 BogoMIPS).
[ 0.242529] device: 'platform': device_add
[ 0.243048] PM: Adding info for No Bus:platform
[ 0.245066] khelper used greatest stack depth: 5256 bytes left
[ 0.245112] bus: 'platform': registered
[ 0.245124] Registering sysdev class 'cpu'
[ 0.245998] khelper used greatest stack depth: 5080 bytes left
[ 0.246156] Registering sysdev class 'memory'
[ 0.247360] Registering sys device of class 'memory'
[ 0.247369] Registering sys device 'memory0'
[ 0.247631] Registering sys device of class 'memory'
[ 0.247639] Registering sys device 'memory1'
[ 0.247875] Registering sys device of class 'memory'
[ 0.247884] Registering sys device 'memory2'
[ 0.248124] Registering sys device of class 'memory'
[ 0.248132] Registering sys device 'memory3'
[ 0.248429] Registering sys device of class 'memory'
[ 0.248438] Registering sys device 'memory4'
[ 0.248680] Registering sys device of class 'memory'
[ 0.248689] Registering sys device 'memory5'
[ 0.248951] Registering sys device of class 'memory'
[ 0.248959] Registering sys device 'memory6'
[ 0.321681] Registering sys device of class 'memory'
[ 0.322067] Registering sys device 'memory7'
[ 0.327452] calling init_mmap_min_addr+0x0/0x26 @ 1
[ 0.328051] initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs
[ 0.329008] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.330015] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
[ 0.331008] calling net_ns_init+0x0/0xf3 @ 1
[ 0.332221] initcall net_ns_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.333283] calling e820_mark_nvs_memory+0x0/0x40 @ 1
[ 0.334013] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs
[ 0.335007] calling cpufreq_tsc+0x0/0x28 @ 1
[ 0.336008] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[ 0.337051] calling pci_reboot_init+0x0/0x14 @ 1
[ 0.338009] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
[ 0.339008] calling init_lapic_sysfs+0x0/0x2d @ 1
[ 0.340006] Registering sysdev class 'lapic'
[ 0.341236] Registering sys device of class 'lapic'
[ 0.342082] Registering sys device 'lapic0'
[ 0.344143] initcall init_lapic_sysfs+0x0/0x2d returned 0 after 3906 usecs
[ 0.345061] calling init_smp_flush+0x0/0x39 @ 1
[ 0.346009] initcall init_smp_flush+0x0/0x39 returned 0 after 0 usecs
[ 0.347009] calling alloc_frozen_cpus+0x0/0x1e @ 1
[ 0.348011] initcall alloc_frozen_cpus+0x0/0x1e returned 0 after 0 usecs
[ 0.349050] calling sysctl_init+0x0/0x16 @ 1
[ 0.350012] initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs
[ 0.351007] calling ksysfs_init+0x0/0x94 @ 1
[ 0.352049] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs
[ 0.354007] calling async_init+0x0/0x60 @ 1
[ 0.355095] initcall async_init+0x0/0x60 returned 0 after 0 usecs
[ 0.356060] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.357042] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
[ 0.358007] calling pm_init+0x0/0x64 @ 1
[ 0.359149] initcall pm_init+0x0/0x64 returned 0 after 0 usecs
[ 0.360088] calling pm_disk_init+0x0/0x19 @ 1
[ 0.361019] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
[ 0.362009] calling swsusp_header_init+0x0/0x2c @ 1
[ 0.363009] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs
[ 0.365013] calling init_hw_breakpoint+0x0/0x12 @ 1
[ 0.367010] initcall init_hw_breakpoint+0x0/0x12 returned 0 after 0 usecs
[ 0.368049] calling init_zero_pfn+0x0/0x35 @ 1
[ 0.369008] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
[ 0.370007] calling filelock_init+0x0/0x2e @ 1
[ 0.371014] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[ 0.372089] calling init_script_binfmt+0x0/0x14 @ 1
[ 0.373023] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.374007] calling init_elf_binfmt+0x0/0x14 @ 1
[ 0.375008] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.376058] calling init_compat_elf_binfmt+0x0/0x14 @ 1
[ 0.377008] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 0.378007] calling debugfs_init+0x0/0x5c @ 1
[ 0.379019] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
[ 0.380090] calling securityfs_init+0x0/0x53 @ 1
[ 0.381019] initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
[ 0.382055] calling calibrate_xor_blocks+0x0/0x141 @ 1
[ 0.383010] xor: automatically using best checksumming function: generic_sse
[ 0.389007] generic_sse: 3220.000 MB/sec
[ 0.390006] xor: using function: generic_sse (3220.000 MB/sec)
[ 0.391014] initcall calibrate_xor_blocks+0x0/0x141 returned 0 after 7812 usecs
[ 0.392007] calling random32_init+0x0/0xcd @ 1
[ 0.393008] initcall random32_init+0x0/0xcd returned 0 after 0 usecs
[ 0.394008] calling early_resume_init+0x0/0x13 @ 1
[ 0.395025] Time: 0:55:05 Date: 02/15/10
[ 0.396007] initcall early_resume_init+0x0/0x13 returned 0 after 976 usecs
[ 0.397007] calling cpufreq_core_init+0x0/0x9b @ 1
[ 0.398016] initcall cpufreq_core_init+0x0/0x9b returned 0 after 0 usecs
[ 0.399008] calling sock_init+0x0/0x59 @ 1
[ 0.400200] initcall sock_init+0x0/0x59 returned 0 after 0 usecs
[ 0.401008] calling net_inuse_init+0x0/0x26 @ 1
[ 0.402022] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs
[ 0.403007] calling netpoll_init+0x0/0x14 @ 1
[ 0.404008] initcall netpoll_init+0x0/0x14 returned 0 after 0 usecs
[ 0.405008] calling netlink_proto_init+0x0/0x14a @ 1
[ 0.406069] NET: Registered protocol family 16
[ 0.407130] initcall netlink_proto_init+0x0/0x14a returned 0 after 976 usecs
[ 0.408008] calling bdi_class_init+0x0/0x41 @ 1
[ 0.409008] device class 'bdi': registering
[ 0.411190] initcall bdi_class_init+0x0/0x41 returned 0 after 1953 usecs
[ 0.412008] calling kobject_uevent_init+0x0/0x54 @ 1
[ 0.413031] initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
[ 0.414060] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.415006] device class 'pci_bus': registering
[ 0.416272] initcall pcibus_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.417051] calling pci_driver_init+0x0/0x12 @ 1
[ 0.418219] bus: 'pci': registered
[ 0.420009] initcall pci_driver_init+0x0/0x12 returned 0 after 1953 usecs
[ 0.421008] calling lcd_class_init+0x0/0x4d @ 1
[ 0.422008] device class 'lcd': registering
[ 0.423219] initcall lcd_class_init+0x0/0x4d returned 0 after 976 usecs
[ 0.424100] calling backlight_class_init+0x0/0x5d @ 1
[ 0.425009] device class 'backlight': registering
[ 0.426217] initcall backlight_class_init+0x0/0x5d returned 0 after 976 usecs
[ 0.427056] calling video_output_class_init+0x0/0x19 @ 1
[ 0.428007] device class 'video_output': registering
[ 0.429218] initcall video_output_class_init+0x0/0x19 returned 0 after 976 usecs
[ 0.430055] calling tty_class_init+0x0/0x38 @ 1
[ 0.431009] device class 'tty': registering
[ 0.433182] initcall tty_class_init+0x0/0x38 returned 0 after 1953 usecs
[ 0.434009] calling vtconsole_class_init+0x0/0xc3 @ 1
[ 0.435008] device class 'vtconsole': registering
[ 0.437112] device: 'vtcon0': device_add
[ 0.438045] PM: Adding info for No Bus:vtcon0
[ 0.439203] initcall vtconsole_class_init+0x0/0xc3 returned 0 after 3906 usecs
[ 0.440056] calling i2c_init+0x0/0x6a @ 1
[ 0.441217] bus: 'i2c': registered
[ 0.442064] bus: 'i2c': add driver dummy
[ 0.444099] i2c-core: driver [dummy] registered
[ 0.445029] initcall i2c_init+0x0/0x6a returned 0 after 3906 usecs
[ 0.446008] calling amd_postcore_init+0x0/0x1b @ 1
[ 0.447010] node 0 link 0: io port [1000, fffff]
[ 0.448058] TOM: 0000000040000000 aka 1024M
[ 0.449007] node 0 link 0: mmio [e0000000, efffffff]
[ 0.450196] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.451199] node 0 link 0: mmio [a0000, bffff]
[ 0.453007] node 0 link 0: mmio [40000000, fed3ffff]
[ 0.455007] bus: [00, ff] on node 0 link 0
[ 0.456048] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.457007] bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
[ 0.458007] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[ 0.459007] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.460047] initcall amd_postcore_init+0x0/0x1b returned 0 after 12695 usecs
[ 0.461007] calling arch_kdebugfs_init+0x0/0x24 @ 1
[ 0.462031] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.463048] calling mtrr_if_init+0x0/0x61 @ 1
[ 0.464023] initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs
[ 0.465008] calling dmi_id_init+0x0/0xd1 @ 1
[ 0.466007] device class 'dmi': registering
[ 0.468195] device: 'id': device_add
[ 0.469136] PM: Adding info for No Bus:id
[ 0.471263] initcall dmi_id_init+0x0/0xd1 returned 0 after 4882 usecs
[ 0.472056] calling pci_arch_init+0x0/0x40 @ 1
[ 0.473013] PCI: Using configuration type 1 for base access
[ 0.474012] initcall pci_arch_init+0x0/0x40 returned 0 after 976 usecs
[ 0.475007] calling topology_init+0x0/0x72 @ 1
[ 0.476059] Registering sys device of class 'cpu'
[ 0.477015] Registering sys device 'cpu0'
[ 0.479094] Registering sys device of class 'cpu'
[ 0.480016] Registering sys device 'cpu1'
[ 0.482150] initcall topology_init+0x0/0x72 returned 0 after 5859 usecs
[ 0.483009] calling mtrr_init_finialize+0x0/0x3d @ 1
[ 0.484008] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs
[ 0.485007] calling param_sysfs_init+0x0/0x107 @ 1
[ 0.626166] initcall param_sysfs_init+0x0/0x107 returned 0 after 136718 usecs
[ 0.627050] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.628031] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.629008] calling audit_watch_init+0x0/0x2f @ 1
[ 0.630011] initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
[ 0.631050] calling init_slow_work+0x0/0x70 @ 1
[ 0.632055] initcall init_slow_work+0x0/0x70 returned 0 after 0 usecs
[ 0.633008] calling default_bdi_init+0x0/0xc5 @ 1
[ 0.634086] device: 'default': device_add
[ 0.635139] PM: Adding info for No Bus:default
[ 0.636258] initcall default_bdi_init+0x0/0xc5 returned 0 after 1953 usecs
[ 0.637055] calling init_bio+0x0/0xcd @ 1
[ 0.639161] bio: create slab <bio-0> at 0
[ 0.640188] initcall init_bio+0x0/0xcd returned 0 after 1953 usecs
[ 0.641008] calling fsnotify_init+0x0/0x12 @ 1
[ 0.642011] initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
[ 0.643061] calling fsnotify_notification_init+0x0/0x68 @ 1
[ 0.644016] initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
[ 0.645008] calling cryptomgr_init+0x0/0x12 @ 1
[ 0.646008] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
[ 0.647049] calling blk_settings_init+0x0/0x2a @ 1
[ 0.648008] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.649007] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.650013] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.651090] calling blk_softirq_init+0x0/0x8c @ 1
[ 0.652014] initcall blk_softirq_init+0x0/0x8c returned 0 after 0 usecs
[ 0.653055] calling blk_iopoll_setup+0x0/0xae @ 1
[ 0.654011] initcall blk_iopoll_setup+0x0/0xae returned 0 after 0 usecs
[ 0.655008] calling genhd_device_init+0x0/0x67 @ 1
[ 0.656006] device class 'block': registering
[ 0.657164] initcall genhd_device_init+0x0/0x67 returned 0 after 976 usecs
[ 0.658050] calling blk_dev_integrity_init+0x0/0x2a @ 1
[ 0.659012] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
[ 0.660008] calling pci_slot_init+0x0/0x46 @ 1
[ 0.661016] initcall pci_slot_init+0x0/0x46 returned 0 after 0 usecs
[ 0.662008] calling fbmem_init+0x0/0x98 @ 1
[ 0.663045] device class 'graphics': registering
[ 0.664330] initcall fbmem_init+0x0/0x98 returned 0 after 976 usecs
[ 0.665010] calling misc_init+0x0/0xb7 @ 1
[ 0.666030] device class 'misc': registering
[ 0.667212] initcall misc_init+0x0/0xb7 returned 0 after 976 usecs
[ 0.668102] calling vga_arb_device_init+0x0/0x80 @ 1
[ 0.669060] device: 'vga_arbiter': device_add
[ 0.670087] PM: Adding info for No Bus:vga_arbiter
[ 0.671254] vgaarb: loaded
[ 0.672102] initcall vga_arb_device_init+0x0/0x80 returned 0 after 2929 usecs
[ 0.673009] calling cn_init+0x0/0x9e @ 1
[ 0.674064] initcall cn_init+0x0/0x9e returned 0 after 0 usecs
[ 0.675008] calling wm8400_module_init+0x0/0x33 @ 1
[ 0.676060] bus: 'i2c': add driver WM8400
[ 0.677241] i2c-core: driver [WM8400] registered
[ 0.678054] initcall wm8400_module_init+0x0/0x33 returned 0 after 1953 usecs
[ 0.679009] calling wm831x_i2c_init+0x0/0x33 @ 1
[ 0.680007] bus: 'i2c': add driver wm831x
[ 0.681229] i2c-core: driver [wm831x] registered
[ 0.683011] initcall wm831x_i2c_init+0x0/0x33 returned 0 after 2929 usecs
[ 0.684008] calling da903x_init+0x0/0x14 @ 1
[ 0.685007] bus: 'i2c': add driver da903x
[ 0.686225] i2c-core: driver [da903x] registered
[ 0.687102] initcall da903x_init+0x0/0x14 returned 0 after 1953 usecs
[ 0.688008] calling pm8607_init+0x0/0x33 @ 1
[ 0.689007] bus: 'i2c': add driver 88PM8607
[ 0.690237] i2c-core: driver [88PM8607] registered
[ 0.691102] initcall pm8607_init+0x0/0x33 returned 0 after 1953 usecs
[ 0.692008] calling init_scsi+0x0/0x8c @ 1
[ 0.693523] device class 'scsi_host': registering
[ 0.694245] bus: 'scsi': registered
[ 0.695100] device class 'scsi_device': registering
[ 0.696224] SCSI subsystem initialized
[ 0.697056] initcall init_scsi+0x0/0x8c returned 0 after 3906 usecs
[ 0.698008] calling ata_init+0x0/0x19e @ 1
[ 0.700183] libata version 3.00 loaded.
[ 0.701010] initcall ata_init+0x0/0x19e returned 0 after 1953 usecs
[ 0.702007] calling phy_init+0x0/0x2e @ 1
[ 0.703006] device class 'mdio_bus': registering
[ 0.704272] bus: 'mdio_bus': registered
[ 0.705050] bus: 'mdio_bus': add driver Generic PHY
[ 0.706222] initcall phy_init+0x0/0x2e returned 0 after 2929 usecs
[ 0.707057] calling init_pcmcia_cs+0x0/0x36 @ 1
[ 0.708008] device class 'pcmcia_socket': registering
[ 0.709224] initcall init_pcmcia_cs+0x0/0x36 returned 0 after 976 usecs
[ 0.710056] calling nop_usb_xceiv_init+0x0/0x12 @ 1
[ 0.711009] bus: 'platform': add driver nop_usb_xceiv
[ 0.712247] initcall nop_usb_xceiv_init+0x0/0x12 returned 0 after 976 usecs
[ 0.713056] calling usb_init+0x0/0x1ad @ 1
[ 0.715218] bus: 'usb': registered
[ 0.716066] bus: 'usb': add driver usbfs
[ 0.718184] usbcore: registered new interface driver usbfs
[ 0.719031] bus: 'usb': add driver hub
[ 0.720226] usbcore: registered new interface driver hub
[ 0.721132] bus: 'usb': add driver usb
[ 0.723259] usbcore: registered new device driver usb
[ 0.724058] initcall usb_init+0x0/0x1ad returned 0 after 9765 usecs
[ 0.725009] calling serio_init+0x0/0x86 @ 1
[ 0.727178] bus: 'serio': registered
[ 0.729013] initcall serio_init+0x0/0x86 returned 0 after 2929 usecs
[ 0.730008] calling gameport_init+0x0/0x86 @ 1
[ 0.732251] bus: 'gameport': registered
[ 0.733083] initcall gameport_init+0x0/0x86 returned 0 after 1953 usecs
[ 0.734055] calling input_init+0x0/0xbd @ 1
[ 0.735008] device class 'input': registering
[ 0.736239] initcall input_init+0x0/0xbd returned 0 after 976 usecs
[ 0.737056] calling rtc_init+0x0/0x6c @ 1
[ 0.738009] device class 'rtc': registering
[ 0.739220] initcall rtc_init+0x0/0x6c returned 0 after 976 usecs
[ 0.740056] calling init_dvbdev+0x0/0xd7 @ 1
[ 0.741014] device class 'dvb': registering
[ 0.742221] initcall init_dvbdev+0x0/0xd7 returned 0 after 976 usecs
[ 0.743056] calling pps_init+0x0/0xb1 @ 1
[ 0.744009] device class 'pps': registering
[ 0.745222] LinuxPPS API ver. 1 registered
[ 0.746054] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.747009] initcall pps_init+0x0/0xb1 returned 0 after 2929 usecs
[ 0.748008] calling power_supply_class_init+0x0/0x38 @ 1
[ 0.749009] device class 'power_supply': registering
[ 0.750281] initcall power_supply_class_init+0x0/0x38 returned 0 after 976 usecs
[ 0.751049] calling hwmon_init+0x0/0x47 @ 1
[ 0.752011] device class 'hwmon': registering
[ 0.753226] initcall hwmon_init+0x0/0x47 returned 0 after 976 usecs
[ 0.754055] calling thermal_init+0x0/0x57 @ 1
[ 0.755007] device class 'thermal': registering
[ 0.756230] initcall thermal_init+0x0/0x57 returned 0 after 976 usecs
[ 0.757055] calling raid6_select_algo+0x0/0x1cc @ 1
[ 0.775009] raid6: int64x1 1789 MB/s
[ 0.793054] raid6: int64x2 1976 MB/s
[ 0.811012] raid6: int64x4 1527 MB/s
[ 0.829074] raid6: int64x8 1144 MB/s
[ 0.847032] raid6: sse2x1 2203 MB/s
[ 0.865056] raid6: sse2x2 3046 MB/s
[ 0.883007] raid6: sse2x4 3152 MB/s
[ 0.884006] raid6: using algorithm sse2x4 (3152 MB/s)
[ 0.885054] initcall raid6_select_algo+0x0/0x1cc returned 0 after 124023 usecs
[ 0.886007] calling md_init+0x0/0xd0 @ 1
[ 0.887038] initcall md_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.889008] calling leds_init+0x0/0x40 @ 1
[ 0.890009] device class 'leds': registering
[ 0.891226] initcall leds_init+0x0/0x40 returned 0 after 976 usecs
[ 0.893009] calling pci_subsys_init+0x0/0x102 @ 1
[ 0.894007] PCI: Probing PCI hardware
[ 0.895021] PCI: Probing PCI hardware (bus 00)
[ 0.896037] device: 'pci0000:00': device_add
[ 0.897076] PM: Adding info for No Bus:pci0000:00
[ 0.898016] device: '0000:00': device_add
[ 0.899040] PM: Adding info for No Bus:0000:00
[ 0.900208] pci_bus 0000:00: scanning bus
[ 0.901144] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[ 0.903038] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.904126] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[ 0.905113] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xba
[ 0.906006] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.907008] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.908037] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[ 0.909064] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
[ 0.910031] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
[ 0.911013] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
[ 0.912022] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x19d
[ 0.913066] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.914011] pci 0000:00:01.1: PME# disabled
[ 0.915051] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[ 0.916063] pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
[ 0.917051] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.918026] pci 0000:00:02.0: supports D1 D2
[ 0.919006] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.920060] pci 0000:00:02.0: PME# disabled
[ 0.921038] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[ 0.922026] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[ 0.923051] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x19d
[ 0.924076] pci 0000:00:02.1: supports D1 D2
[ 0.925006] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.926010] pci 0000:00:02.1: PME# disabled
[ 0.927056] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[ 0.928103] pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
[ 0.929014] pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff]
[ 0.930013] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
[ 0.931039] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.932076] pci 0000:00:04.0: supports D1 D2
[ 0.933039] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[ 0.934086] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.936029] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.937055] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[ 0.938084] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.939037] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[ 0.940023] pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
[ 0.941013] pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007]
[ 0.942086] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.943026] pci 0000:00:0a.0: supports D1 D2
[ 0.944006] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.945009] pci 0000:00:0a.0: PME# disabled
[ 0.947040] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[ 0.948095] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.949043] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.950009] pci 0000:00:0b.0: PME# disabled
[ 0.951052] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[ 0.952099] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.953042] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.954009] pci 0000:00:0c.0: PME# disabled
[ 0.955051] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[ 0.956089] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.957044] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.958050] pci 0000:00:0d.0: PME# disabled
[ 0.959053] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[ 0.960051] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.961042] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.962009] pci 0000:00:0e.0: PME# disabled
[ 0.963064] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[ 0.964055] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.965048] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[ 0.966057] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x19d
[ 0.967031] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[ 0.968058] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x19d
[ 0.969073] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[ 0.971018] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x19d
[ 0.972039] pci_bus 0000:00: fixups for bus
[ 0.973006] PCI: peer root bus 00 res updated from pci conf
[ 0.974013] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0
[ 0.975021] pci_bus 0000:05: scanning bus
[ 0.976047] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[ 0.977026] pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff]
[ 0.978014] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
[ 0.979050] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x19d
[ 0.980029] pci 0000:05:07.0: supports D1 D2
[ 0.981006] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[ 0.982010] pci 0000:05:07.0: PME# disabled
[ 0.983071] pci_bus 0000:05: fixups for bus
[ 0.984007] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.985010] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.986010] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
[ 0.987009] pci_bus 0000:05: bus scan returning with max=05
[ 0.988010] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0
[ 0.989020] pci_bus 0000:04: scanning bus
[ 0.990083] pci_bus 0000:04: fixups for bus
[ 0.991006] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.992021] pci_bus 0000:04: bus scan returning with max=04
[ 0.993010] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0
[ 0.994019] pci_bus 0000:03: scanning bus
[ 0.996036] pci_bus 0000:03: fixups for bus
[ 0.997006] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.998021] pci_bus 0000:03: bus scan returning with max=03
[ 0.999010] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0
[ 1.000019] pci_bus 0000:02: scanning bus
[ 1.001083] pci_bus 0000:02: fixups for bus
[ 1.002006] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.003021] pci_bus 0000:02: bus scan returning with max=02
[ 1.004010] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0
[ 1.005020] pci_bus 0000:01: scanning bus
[ 1.006033] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[ 1.007009] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x1b
[ 1.009021] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 1.010014] pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
[ 1.011014] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
[ 1.012035] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.013015] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x19d
[ 1.014038] pci 0000:01:00.0: supports D1 D2
[ 1.015048] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[ 1.016008] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x1b
[ 1.017016] pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
[ 1.018056] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x19d
[ 1.019034] pci 0000:01:00.1: supports D1 D2
[ 1.020105] pci_bus 0000:01: fixups for bus
[ 1.021006] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 1.022012] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 1.023009] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 1.024013] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 1.025006] pci_bus 0000:01: bus scan returning with max=01
[ 1.026010] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1
[ 1.027012] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1
[ 1.028012] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1
[ 1.029012] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1
[ 1.030012] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1
[ 1.031011] pci_bus 0000:00: bus scan returning with max=05
[ 1.032009] device: '0000:00:00.0': device_add
[ 1.033017] bus: 'pci': add device 0000:00:00.0
[ 1.034092] PM: Adding info for pci:0000:00:00.0
[ 1.035287] device: '0000:00:01.0': device_add
[ 1.036018] bus: 'pci': add device 0000:00:01.0
[ 1.038007] PM: Adding info for pci:0000:00:01.0
[ 1.039263] device: '0000:00:01.1': device_add
[ 1.040058] bus: 'pci': add device 0000:00:01.1
[ 1.042071] PM: Adding info for pci:0000:00:01.1
[ 1.043212] device: '0000:00:02.0': device_add
[ 1.044108] bus: 'pci': add device 0000:00:02.0
[ 1.045089] PM: Adding info for pci:0000:00:02.0
[ 1.046213] device: '0000:00:02.1': device_add
[ 1.047064] bus: 'pci': add device 0000:00:02.1
[ 1.048089] PM: Adding info for pci:0000:00:02.1
[ 1.049213] device: '0000:00:04.0': device_add
[ 1.050063] bus: 'pci': add device 0000:00:04.0
[ 1.051097] PM: Adding info for pci:0000:00:04.0
[ 1.052215] device: '0000:00:06.0': device_add
[ 1.053064] bus: 'pci': add device 0000:00:06.0
[ 1.054088] PM: Adding info for pci:0000:00:06.0
[ 1.055214] device: '0000:00:09.0': device_add
[ 1.056063] bus: 'pci': add device 0000:00:09.0
[ 1.057089] PM: Adding info for pci:0000:00:09.0
[ 1.058212] device: '0000:00:0a.0': device_add
[ 1.059064] bus: 'pci': add device 0000:00:0a.0
[ 1.060097] PM: Adding info for pci:0000:00:0a.0
[ 1.062056] device: '0000:00:0b.0': device_add
[ 1.063018] bus: 'pci': add device 0000:00:0b.0
[ 1.064089] PM: Adding info for pci:0000:00:0b.0
[ 1.066086] device: '0000:00:0c.0': device_add
[ 1.067018] bus: 'pci': add device 0000:00:0c.0
[ 1.068086] PM: Adding info for pci:0000:00:0c.0
[ 1.070108] device: '0000:00:0d.0': device_add
[ 1.071018] bus: 'pci': add device 0000:00:0d.0
[ 1.072087] PM: Adding info for pci:0000:00:0d.0
[ 1.074146] device: '0000:00:0e.0': device_add
[ 1.075018] bus: 'pci': add device 0000:00:0e.0
[ 1.076087] PM: Adding info for pci:0000:00:0e.0
[ 1.078252] device: '0000:00:18.0': device_add
[ 1.079019] bus: 'pci': add device 0000:00:18.0
[ 1.080087] PM: Adding info for pci:0000:00:18.0
[ 1.082265] device: '0000:00:18.1': device_add
[ 1.083059] bus: 'pci': add device 0000:00:18.1
[ 1.084089] PM: Adding info for pci:0000:00:18.1
[ 1.085215] device: '0000:00:18.2': device_add
[ 1.086064] bus: 'pci': add device 0000:00:18.2
[ 1.087096] PM: Adding info for pci:0000:00:18.2
[ 1.088217] device: '0000:00:18.3': device_add
[ 1.089064] bus: 'pci': add device 0000:00:18.3
[ 1.090088] PM: Adding info for pci:0000:00:18.3
[ 1.091213] device: '0000:05:07.0': device_add
[ 1.092064] bus: 'pci': add device 0000:05:07.0
[ 1.093088] PM: Adding info for pci:0000:05:07.0
[ 1.094214] device: '0000:05': device_add
[ 1.095096] PM: Adding info for No Bus:0000:05
[ 1.097246] device: '0000:04': device_add
[ 1.098048] PM: Adding info for No Bus:0000:04
[ 1.100118] device: '0000:03': device_add
[ 1.101039] PM: Adding info for No Bus:0000:03
[ 1.102211] device: '0000:02': device_add
[ 1.103096] PM: Adding info for No Bus:0000:02
[ 1.104216] device: '0000:01:00.0': device_add
[ 1.105064] bus: 'pci': add device 0000:01:00.0
[ 1.106088] PM: Adding info for pci:0000:01:00.0
[ 1.107048] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.108216] device: '0000:01:00.1': device_add
[ 1.109109] bus: 'pci': add device 0000:01:00.1
[ 1.111026] PM: Adding info for pci:0000:01:00.1
[ 1.112215] device: '0000:01': device_add
[ 1.114042] PM: Adding info for No Bus:0000:01
[ 1.116103] pci 0000:00:00.0: default IRQ router [10de:005e]
[ 1.117028] pci 0000:00:01.1: ignoring bogus IRQ 255
[ 1.118013] pci 0000:00:02.0: ignoring bogus IRQ 255
[ 1.119013] pci 0000:00:02.1: ignoring bogus IRQ 255
[ 1.120148] PCI: pci_cache_line_size set to 64 bytes
[ 1.121037] pci 0000:00:01.1: BAR 0: reserving [io 0xdc00-0xdc1f flags 0x20101] (d=0, p=0)
[ 1.122009] pci 0000:00:01.1: BAR 4: reserving [io 0x4c00-0x4c3f flags 0x20101] (d=0, p=0)
[ 1.123008] pci 0000:00:01.1: BAR 5: reserving [io 0x4c40-0x4c7f flags 0x20101] (d=0, p=0)
[ 1.124059] pci 0000:00:02.0: BAR 0: reserving [mem 0xda102000-0xda102fff flags 0x20200] (d=0, p=0)
[ 1.125058] pci 0000:00:02.1: BAR 0: reserving [mem 0xfeb00000-0xfeb000ff flags 0x20200] (d=0, p=0)
[ 1.126009] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] already in use
[ 1.128007] pci 0000:00:02.1: can't reserve [mem 0xfeb00000-0xfeb000ff]
[ 1.129066] pci 0000:00:04.0: BAR 0: reserving [io 0xd400-0xd4ff flags 0x20101] (d=0, p=0)
[ 1.130008] pci 0000:00:04.0: BAR 1: reserving [io 0xd800-0xd8ff flags 0x20101] (d=0, p=0)
[ 1.131008] pci 0000:00:04.0: BAR 2: reserving [mem 0xda101000-0xda101fff flags 0x20200] (d=0, p=0)
[ 1.132016] pci 0000:00:06.0: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 1.133048] pci 0000:00:06.0: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 1.134008] pci 0000:00:06.0: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 1.135008] pci 0000:00:06.0: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 1.137048] pci 0000:00:06.0: BAR 4: reserving [io 0xf000-0xf00f flags 0x20101] (d=0, p=0)
[ 1.138025] pci 0000:00:0a.0: BAR 0: reserving [mem 0xda100000-0xda100fff flags 0x20200] (d=0, p=0)
[ 1.139049] pci 0000:00:0a.0: BAR 1: reserving [io 0xd000-0xd007 flags 0x20101] (d=0, p=0)
[ 1.140077] pci 0000:05:07.0: BAR 0: reserving [io 0xc000-0xc0ff flags 0x20101] (d=0, p=0)
[ 1.141008] pci 0000:05:07.0: BAR 1: reserving [mem 0xda000000-0xda0000ff flags 0x20200] (d=0, p=0)
[ 1.142016] pci 0000:01:00.0: BAR 0: reserving [mem 0xd0000000-0xd7ffffff flags 0x21208] (d=0, p=0)
[ 1.143058] pci 0000:01:00.0: BAR 1: reserving [io 0xb000-0xb0ff flags 0x20101] (d=0, p=0)
[ 1.144008] pci 0000:01:00.0: BAR 2: reserving [mem 0xd9000000-0xd900ffff flags 0x20200] (d=0, p=0)
[ 1.146034] pci 0000:01:00.1: BAR 0: reserving [mem 0xd9010000-0xd901ffff flags 0x20200] (d=1, p=1)
[ 1.147056] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.148049] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.149020] reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x102 returned 0 after 250000 usecs
[ 1.151008] calling proto_init+0x0/0x12 @ 1
[ 1.152076] initcall proto_init+0x0/0x12 returned 0 after 0 usecs
[ 1.153008] calling net_dev_init+0x0/0x1ad @ 1
[ 1.154058] device class 'net': registering
[ 1.155227] device: 'lo': device_add
[ 1.156358] PM: Adding info for No Bus:lo
[ 1.158147] initcall net_dev_init+0x0/0x1ad returned 0 after 3906 usecs
[ 1.159010] calling neigh_init+0x0/0x71 @ 1
[ 1.160009] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[ 1.161007] calling fib_rules_init+0x0/0xa6 @ 1
[ 1.162064] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 1.163007] calling pktsched_init+0x0/0xd0 @ 1
[ 1.164032] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
[ 1.165008] calling tc_filter_init+0x0/0x4c @ 1
[ 1.166050] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs
[ 1.167007] calling tc_action_init+0x0/0x4c @ 1
[ 1.168008] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs
[ 1.169007] calling genl_init+0x0/0x8f @ 1
[ 1.170173] initcall genl_init+0x0/0x8f returned 0 after 0 usecs
[ 1.171049] calling cipso_v4_init+0x0/0x88 @ 1
[ 1.172031] initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs
[ 1.173007] calling wanrouter_init+0x0/0x55 @ 1
[ 1.174007] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[ 1.175090] initcall wanrouter_init+0x0/0x55 returned 0 after 976 usecs
[ 1.176008] calling bt_init+0x0/0x5a @ 1
[ 1.177006] Bluetooth: Core ver 2.15
[ 1.178095] device class 'bluetooth': registering
[ 1.180208] NET: Registered protocol family 31
[ 1.181008] Bluetooth: HCI device and connection manager initialized
[ 1.182030] Bluetooth: HCI socket layer initialized
[ 1.183008] initcall bt_init+0x0/0x5a returned 0 after 5859 usecs
[ 1.184059] calling atm_init+0x0/0xb4 @ 1
[ 1.185008] NET: Registered protocol family 8
[ 1.186007] NET: Registered protocol family 20
[ 1.187066] device class 'atm': registering
[ 1.188265] initcall atm_init+0x0/0xb4 returned 0 after 2929 usecs
[ 1.189050] calling cfg80211_init+0x0/0xca @ 1
[ 1.190009] device class 'ieee80211': registering
[ 1.191415] Registering platform device 'regulatory.0'. Parent at platform
[ 1.192060] device: 'regulatory.0': device_add
[ 1.193018] bus: 'platform': add device regulatory.0
[ 1.194033] PM: Adding info for platform:regulatory.0
[ 1.195215] cfg80211: Calling CRDA to update world regulatory domain
[ 1.197300] initcall cfg80211_init+0x0/0xca returned 0 after 6835 usecs
[ 1.198010] calling wireless_nlevent_init+0x0/0x12 @ 1
[ 1.199010] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
[ 1.200007] calling netlbl_init+0x0/0x81 @ 1
[ 1.201058] NetLabel: Initializing
[ 1.202006] NetLabel: domain hash size = 128
[ 1.203005] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.204218] NetLabel: unlabeled traffic allowed by default
[ 1.205049] initcall netlbl_init+0x0/0x81 returned 0 after 3906 usecs
[ 1.206007] calling sysctl_init+0x0/0x48 @ 1
[ 1.207013] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs
[ 1.208049] calling print_ICs+0x0/0xb2 @ 1
[ 1.209009] initcall print_ICs+0x0/0xb2 returned 0 after 0 usecs
[ 1.210008] calling hpet_late_init+0x0/0x119 @ 1
[ 1.211008] initcall hpet_late_init+0x0/0x119 returned -19 after 0 usecs
[ 1.212060] calling clocksource_done_booting+0x0/0x38 @ 1
[ 1.213010] Switching to clocksource jiffies
[ 1.214009] initcall clocksource_done_booting+0x0/0x38 returned 0 after 976 usecs
[ 1.215008] calling rb_init_debugfs+0x0/0x2f @ 1
[ 1.216139] initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs
[ 1.217049] calling tracer_init_debugfs+0x0/0x247 @ 1
[ 1.219851] initcall tracer_init_debugfs+0x0/0x247 returned 0 after 0 usecs
[ 1.220009] calling init_trace_printk_function_export+0x0/0x2f @ 1
[ 1.221077] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 0 usecs
[ 1.222008] calling event_trace_init+0x0/0x1b6 @ 1
[ 1.271149] initcall event_trace_init+0x0/0x1b6 returned 0 after 46875 usecs
[ 1.272010] calling init_pipe_fs+0x0/0x4c @ 1
[ 1.273183] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 usecs
[ 1.274008] calling eventpoll_init+0x0/0xe3 @ 1
[ 1.275037] initcall eventpoll_init+0x0/0xe3 returned 0 after 0 usecs
[ 1.276008] calling anon_inode_init+0x0/0x128 @ 1
[ 1.277189] initcall anon_inode_init+0x0/0x128 returned 0 after 0 usecs
[ 1.278008] calling fscache_init+0x0/0xaf @ 1
[ 1.279018] Slow work thread pool: Starting up
[ 1.280236] Slow work thread pool: Ready
[ 1.281062] FS-Cache: Loaded
[ 1.282008] initcall fscache_init+0x0/0xaf returned 0 after 2929 usecs
[ 1.283008] calling tomoyo_initerface_init+0x0/0x11c @ 1
[ 1.284008] initcall tomoyo_initerface_init+0x0/0x11c returned 0 after 0 usecs
[ 1.285008] calling blk_scsi_ioctl_init+0x0/0x289 @ 1
[ 1.286008] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs
[ 1.287008] calling chr_dev_init+0x0/0xc3 @ 1
[ 1.288040] device class 'mem': registering
[ 1.290189] device: 'mem': device_add
[ 1.291040] PM: Adding info for No Bus:mem
[ 1.292203] device: 'null': device_add
[ 1.293094] PM: Adding info for No Bus:null
[ 1.294205] device: 'port': device_add
[ 1.295082] PM: Adding info for No Bus:port
[ 1.296209] device: 'zero': device_add
[ 1.297081] PM: Adding info for No Bus:zero
[ 1.299230] device: 'full': device_add
[ 1.303109] PM: Adding info for No Bus:full
[ 1.307451] device: 'random': device_add
[ 1.311104] PM: Adding info for No Bus:random
[ 1.316191] device: 'urandom': device_add
[ 1.320099] PM: Adding info for No Bus:urandom
[ 1.325254] device: 'kmsg': device_add
[ 1.329088] PM: Adding info for No Bus:kmsg
[ 1.333482] initcall chr_dev_init+0x0/0xc3 returned 0 after 43945 usecs
[ 1.340063] calling firmware_class_init+0x0/0x79 @ 1
[ 1.345007] device class 'firmware': registering
[ 1.350242] initcall firmware_class_init+0x0/0x79 returned 0 after 4882 usecs
[ 1.357011] Clocksource tsc unstable (delta = 1534786890 ns)
[ 1.363292] calling init_pcmcia_bus+0x0/0x84 @ 1
[ 1.368260] bus: 'pcmcia': registered
[ 1.369082] initcall init_pcmcia_bus+0x0/0x84 returned 0 after 976 usecs
[ 1.370009] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 1.371021] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
[ 1.372060] calling pcibios_assign_resources+0x0/0x74 @ 1
[ 1.374213] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[ 1.375012] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]
[ 1.376051] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[ 1.377008] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 1.378011] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
[ 1.379009] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.380054] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 1.381006] pci 0000:00:0b.0: bridge window [io disabled]
[ 1.382011] pci 0000:00:0b.0: bridge window [mem disabled]
[ 1.383009] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 1.384052] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 1.385006] pci 0000:00:0c.0: bridge window [io disabled]
[ 1.386010] pci 0000:00:0c.0: bridge window [mem disabled]
[ 1.387009] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 1.388052] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 1.389006] pci 0000:00:0d.0: bridge window [io disabled]
[ 1.390010] pci 0000:00:0d.0: bridge window [mem disabled]
[ 1.391009] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 1.392058] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[ 1.393072] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 1.394009] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 1.395011] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
[ 1.396010] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 1.397062] pci 0000:00:09.0: setting latency timer to 64
[ 1.398019] pci 0000:00:0b.0: setting latency timer to 64
[ 1.399018] pci 0000:00:0c.0: setting latency timer to 64
[ 1.400018] pci 0000:00:0d.0: setting latency timer to 64
[ 1.401059] pci 0000:00:0e.0: setting latency timer to 64
[ 1.402009] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 1.403007] pci_bus 0000:00: resource 1 [mem 0x40000000-0xfcffffffff]
[ 1.404007] pci_bus 0000:00: resource 2 [mem 0xfeb00000-0xfec0ffff]
[ 1.406007] pci_bus 0000:00: resource 3 [mem 0x000a0000-0x000bffff]
[ 1.407007] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.408007] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[ 1.409046] pci_bus 0000:05: resource 3 [io 0x0000-0xffff]
[ 1.410007] pci_bus 0000:05: resource 4 [mem 0x40000000-0xfcffffffff]
[ 1.411007] pci_bus 0000:05: resource 5 [mem 0xfeb00000-0xfec0ffff]
[ 1.412007] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.413048] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.414007] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 1.415007] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 1.416008] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 41015 usecs
[ 1.417048] calling sysctl_core_init+0x0/0x38 @ 1
[ 1.418034] initcall sysctl_core_init+0x0/0x38 returned 0 after 0 usecs
[ 1.419069] calling inet_init+0x0/0x1c0 @ 1
[ 1.420037] NET: Registered protocol family 2
[ 1.421149] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.422810] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 1.425708] TCP bind hash table entries: 32768 (order: 9, 2359296 bytes)
[ 1.430905] TCP: Hash tables configured (established 131072 bind 32768)
[ 1.431102] TCP reno registered
[ 1.432047] UDP hash table entries: 512 (order: 4, 81920 bytes)
[ 1.433200] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
[ 1.434458] initcall inet_init+0x0/0x1c0 returned 0 after 13671 usecs
[ 1.435113] calling af_unix_init+0x0/0x55 @ 1
[ 1.436023] NET: Registered protocol family 1
[ 1.437076] initcall af_unix_init+0x0/0x55 returned 0 after 976 usecs
[ 1.438008] calling init_sunrpc+0x0/0x5d @ 1
[ 1.439581] RPC: Registered udp transport module.
[ 1.440060] RPC: Registered tcp transport module.
[ 1.441007] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.442011] initcall init_sunrpc+0x0/0x5d returned 0 after 2929 usecs
[ 1.443008] calling pci_apply_final_quirks+0x0/0xfb @ 1
[ 1.444128] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.446045] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.447009] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.448008] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xb8
[ 1.449060] pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.450010] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.451007] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.452007] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xb8
[ 1.453060] pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.454051] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.455008] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.456007] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xb8
[ 1.457017] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.458014] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.459008] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.471075] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xb8
[ 1.472018] pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.473018] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.474007] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.475036] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xb8
[ 1.476017] pci 0000:00:04.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.477014] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.478007] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.479008] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xb8
[ 1.480017] pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.481014] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.482007] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.483007] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xb8
[ 1.484017] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.485009] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.486007] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.487007] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xb8
[ 1.488016] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.489014] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.490007] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.491007] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xb8
[ 1.492017] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.493115] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.494008] pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x85
[ 1.495021] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.496020] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.497008] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x6a
[ 1.498008] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.499007] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.500008] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xb8
[ 1.501017] pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.502129] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.503008] pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x85
[ 1.504021] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.505020] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.506008] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x6a
[ 1.507008] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.508007] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.509007] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xb8
[ 1.510017] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.511144] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.512008] pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x85
[ 1.513020] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.514021] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.515008] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x6a
[ 1.516008] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.517007] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.518007] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xb8
[ 1.519017] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd
[ 1.520162] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.521010] pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x85
[ 1.522020] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.523021] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.524008] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x6a
[ 1.525008] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.526007] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.527007] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xb8
[ 1.528016] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.529007] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.530007] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xb8
[ 1.531017] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.532007] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.533007] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xb8
[ 1.534016] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.535008] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.536007] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xb8
[ 1.537016] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.538007] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.539007] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xb8
[ 1.540016] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.541007] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.542007] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xb8
[ 1.543017] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.544007] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.545007] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xb8
[ 1.546010] pci 0000:01:00.0: Boot video device
[ 1.547017] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x1b
[ 1.548007] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x9c
[ 1.549007] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xb8
[ 1.550014] PCI: CLS 32 bytes, default 64
[ 1.551008] initcall pci_apply_final_quirks+0x0/0xfb returned 0 after 104492 usecs
[ 1.552009] calling populate_rootfs+0x0/0x10f @ 1
[ 1.554651] initcall populate_rootfs+0x0/0x10f returned 0 after 976 usecs
[ 1.555009] calling pci_iommu_init+0x0/0x31 @ 1
[ 1.556264] bus: 'pci': add driver agpgart-amd64
[ 1.558336] PCI-DMA: Disabling AGP.
[ 1.559196] Registering sysdev class 'gart'
[ 1.560215] Registering sys device of class 'gart'
[ 1.561061] Registering sys device 'gart0'
[ 1.563086] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.564006] PCI-DMA: using GART IOMMU.
[ 1.565010] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.568760] initcall pci_iommu_init+0x0/0x31 returned 0 after 11718 usecs
[ 1.569021] calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1
[ 1.570009] initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs
[ 1.571060] calling i8259A_init_sysfs+0x0/0x22 @ 1
[ 1.572007] Registering sysdev class 'i8259'
[ 1.574169] Registering sys device of class 'i8259'
[ 1.575016] Registering sys device 'i82590'
[ 1.576203] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 3906 usecs
[ 1.577056] calling vsyscall_init+0x0/0x6c @ 1
[ 1.578024] initcall vsyscall_init+0x0/0x6c returned 0 after 0 usecs
[ 1.579008] calling sbf_init+0x0/0xe9 @ 1
[ 1.580008] initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
[ 1.581058] calling i8237A_init_sysfs+0x0/0x22 @ 1
[ 1.582006] Registering sysdev class 'i8237'
[ 1.583212] Registering sys device of class 'i8237'
[ 1.584055] Registering sys device 'i82370'
[ 1.585209] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 2929 usecs
[ 1.586055] calling add_rtc_cmos+0x0/0x42 @ 1
[ 1.587018] Registering platform device 'rtc_cmos'. Parent at platform
[ 1.588010] device: 'rtc_cmos': device_add
[ 1.589019] bus: 'platform': add device rtc_cmos
[ 1.590095] PM: Adding info for platform:rtc_cmos
[ 1.592258] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.599077] initcall add_rtc_cmos+0x0/0x42 returned 0 after 12695 usecs
[ 1.606010] calling cache_sysfs_init+0x0/0x59 @ 1
[ 1.613265] initcall cache_sysfs_init+0x0/0x59 returned 0 after 1953 usecs
[ 1.620130] calling mcheck_init_device+0x0/0xf7 @ 1
[ 1.625036] Registering sysdev class 'machinecheck'
[ 1.631153] Registering sys device of class 'machinecheck'
[ 1.636103] Registering sys device 'machinecheck0'
[ 1.642093] Registering sys device of class 'machinecheck'
[ 1.643065] Registering sys device 'machinecheck1'
[ 1.644221] device: 'mcelog': device_add
[ 1.645093] PM: Adding info for No Bus:mcelog
[ 1.646216] initcall mcheck_init_device+0x0/0xf7 returned 0 after 20507 usecs
[ 1.647056] calling threshold_init_device+0x0/0x82 @ 1
[ 1.648009] initcall threshold_init_device+0x0/0x82 returned 0 after 0 usecs
[ 1.649007] calling thermal_throttle_init_device+0x0/0xa9 @ 1
[ 1.650007] initcall thermal_throttle_init_device+0x0/0xa9 returned 0 after 0 usecs
[ 1.651058] calling ioapic_init_sysfs+0x0/0xb3 @ 1
[ 1.652006] Registering sysdev class 'ioapic'
[ 1.653213] Registering sys device of class 'ioapic'
[ 1.654055] Registering sys device 'ioapic0'
[ 1.655206] initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 2929 usecs
[ 1.656055] calling add_pcspkr+0x0/0x28 @ 1
[ 1.657020] Registering platform device 'pcspkr'. Parent at platform
[ 1.658008] device: 'pcspkr': device_add
[ 1.659016] bus: 'platform': add device pcspkr
[ 1.660090] PM: Adding info for platform:pcspkr
[ 1.661212] initcall add_pcspkr+0x0/0x28 returned 0 after 3906 usecs
[ 1.662050] calling microcode_init+0x0/0x124 @ 1
[ 1.663020] Registering platform device 'microcode'. Parent at platform
[ 1.664008] device: 'microcode': device_add
[ 1.665015] bus: 'platform': add device microcode
[ 1.666080] PM: Adding info for platform:microcode
[ 1.668187] microcode: microcode: CPU0: AMD CPU family 0xf not supported
[ 1.669071] microcode: microcode: CPU1: AMD CPU family 0xf not supported
[ 1.675847] device: 'microcode': device_add
[ 1.676047] PM: Adding info for No Bus:microcode
[ 1.678051] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.679010] initcall microcode_init+0x0/0x124 returned 0 after 15625 usecs
[ 1.680008] calling start_periodic_check_for_corruption+0x0/0x37 @ 1
[ 1.681006] Scanning for low memory corruption every 60 seconds
[ 1.682068] initcall start_periodic_check_for_corruption+0x0/0x37 returned 0 after 976 usecs
[ 1.683008] calling audit_classes_init+0x0/0xaf @ 1
[ 1.684134] initcall audit_classes_init+0x0/0xaf returned 0 after 0 usecs
[ 1.685050] calling crypto_fpu_module_init+0x0/0x12 @ 1
[ 1.686039] initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 0 usecs
[ 1.687007] calling aes_init+0x0/0x12 @ 1
[ 1.688262] initcall aes_init+0x0/0x12 returned 0 after 0 usecs
[ 1.689099] calling init+0x0/0x12 @ 1
[ 1.690089] initcall init+0x0/0x12 returned 0 after 0 usecs
[ 1.691055] calling aesni_init+0x0/0x164 @ 1
[ 1.692007] Intel AES-NI instructions are not detected.
[ 1.693007] initcall aesni_init+0x0/0x164 returned -19 after 976 usecs
[ 1.694007] calling ghash_pclmulqdqni_mod_init+0x0/0x5d @ 1
[ 1.695056] Intel PCLMULQDQ-NI instructions are not detected.
[ 1.696007] initcall ghash_pclmulqdqni_mod_init+0x0/0x5d returned -19 after 976 usecs
[ 1.697007] calling crc32c_intel_mod_init+0x0/0x20 @ 1
[ 1.698007] initcall crc32c_intel_mod_init+0x0/0x20 returned -19 after 0 usecs
[ 1.699047] calling init_vdso_vars+0x0/0x210 @ 1
[ 1.700025] initcall init_vdso_vars+0x0/0x210 returned 0 after 0 usecs
[ 1.701048] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 1.702013] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 usecs
[ 1.703007] calling sysenter_setup+0x0/0xaf @ 1
[ 1.704013] initcall sysenter_setup+0x0/0xaf returned 0 after 0 usecs
[ 1.705058] calling init_aout_binfmt+0x0/0x14 @ 1
[ 1.706008] initcall init_aout_binfmt+0x0/0x14 returned 0 after 0 usecs
[ 1.707007] calling init_sched_debug_procfs+0x0/0x2c @ 1
[ 1.708025] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
[ 1.709048] calling proc_execdomains_init+0x0/0x22 @ 1
[ 1.710020] initcall proc_execdomains_init+0x0/0x22 returned 0 after 0 usecs
[ 1.711048] calling ioresources_init+0x0/0x3c @ 1
[ 1.712029] initcall ioresources_init+0x0/0x3c returned 0 after 0 usecs
[ 1.713007] calling uid_cache_init+0x0/0x8c @ 1
[ 1.714031] initcall uid_cache_init+0x0/0x8c returned 0 after 0 usecs
[ 1.715058] calling init_posix_timers+0x0/0x17a @ 1
[ 1.716013] initcall init_posix_timers+0x0/0x17a returned 0 after 0 usecs
[ 1.717007] calling init_posix_cpu_timers+0x0/0xe5 @ 1
[ 1.718008] initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
[ 1.719048] calling nsproxy_cache_init+0x0/0x2d @ 1
[ 1.720014] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs
[ 1.721049] calling create_proc_profile+0x0/0x62 @ 1
[ 1.722009] initcall create_proc_profile+0x0/0x62 returned 0 after 0 usecs
[ 1.723007] calling timekeeping_init_device+0x0/0x22 @ 1
[ 1.724006] Registering sysdev class 'timekeeping'
[ 1.726195] Registering sys device of class 'timekeeping'
[ 1.727016] Registering sys device 'timekeeping0'
[ 1.728203] initcall timekeeping_init_device+0x0/0x22 returned 0 after 3906 usecs
[ 1.729056] calling init_clocksource_sysfs+0x0/0x50 @ 1
[ 1.730007] Registering sysdev class 'clocksource'
[ 1.731209] Registering sys device of class 'clocksource'
[ 1.732062] Registering sys device 'clocksource0'
[ 1.733207] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 2929 usecs
[ 1.734055] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 1.735021] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
[ 1.736007] calling init_tstats_procfs+0x0/0x2c @ 1
[ 1.737018] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 usecs
[ 1.738058] calling lockdep_proc_init+0x0/0x7c @ 1
[ 1.739056] initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 usecs
[ 1.740007] calling futex_init+0x0/0x80 @ 1
[ 1.741047] initcall futex_init+0x0/0x80 returned 0 after 0 usecs
[ 1.742051] calling init_rttest+0x0/0x150 @ 1
[ 1.743008] Registering sysdev class 'rttest'
[ 1.744221] Registering sys device of class 'rttest'
[ 1.745060] Registering sys device 'rttest0'
[ 1.746207] Registering sys device of class 'rttest'
[ 1.747066] Registering sys device 'rttest1'
[ 1.749253] Registering sys device of class 'rttest'
[ 1.754084] Registering sys device 'rttest2'
[ 1.759138] Registering sys device of class 'rttest'
[ 1.760070] Registering sys device 'rttest3'
[ 1.761216] Registering sys device of class 'rttest'
[ 1.762076] Registering sys device 'rttest4'
[ 1.763204] Registering sys device of class 'rttest'
[ 1.764056] Registering sys device 'rttest5'
[ 1.766130] Registering sys device of class 'rttest'
[ 1.767052] Registering sys device 'rttest6'
[ 1.768212] Registering sys device of class 'rttest'
[ 1.769062] Registering sys device 'rttest7'
[ 1.770233] Initializing RT-Tester: OK
[ 1.771059] initcall init_rttest+0x0/0x150 returned 0 after 27343 usecs
[ 1.772010] calling proc_dma_init+0x0/0x22 @ 1
[ 1.773024] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[ 1.774007] calling kallsyms_init+0x0/0x25 @ 1
[ 1.775068] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
[ 1.776008] calling snapshot_device_init+0x0/0x12 @ 1
[ 1.777026] device: 'snapshot': device_add
[ 1.779059] PM: Adding info for No Bus:snapshot
[ 1.780311] initcall snapshot_device_init+0x0/0x12 returned 0 after 2929 usecs
[ 1.781010] calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
[ 1.782034] initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 0 usecs
[ 1.783008] calling crash_notes_memory_init+0x0/0x37 @ 1
[ 1.784067] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 0 usecs
[ 1.785009] calling backtrace_regression_test+0x0/0xff @ 1
[ 1.786006] ====[ backtrace testing ]===========
[ 1.787006] Testing a backtrace from process context.
[ 1.788048] The following trace is a kernel self test and not a bug!
[ 1.789008] Pid: 1, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697
[ 1.790006] Call Trace:
[ 1.791010] [<ffffffff8107e49d>] ? backtrace_regression_test+0x0/0xff
[ 1.792049] [<ffffffff8107e4d5>] backtrace_regression_test+0x38/0xff
[ 1.793009] [<ffffffff81b889dc>] ? printk+0x3c/0x3e
[ 1.794009] [<ffffffff810644ac>] ? timekeeping_get_ns+0x16/0x38
[ 1.795008] [<ffffffff81064d43>] ? ktime_get+0x59/0x93
[ 1.796048] [<ffffffff8107e49d>] ? backtrace_regression_test+0x0/0xff
[ 1.797008] [<ffffffff8107e49d>] ? backtrace_regression_test+0x0/0xff
[ 1.798010] [<ffffffff810001ef>] do_one_initcall+0x59/0x159
[ 1.799010] [<ffffffff82a546da>] do_basic_setup+0x4f/0x61
[ 1.800048] [<ffffffff82a54773>] kernel_init+0x87/0xca
[ 1.801009] [<ffffffff81b8a6a7>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1.802008] [<ffffffff810039a4>] kernel_thread_helper+0x4/0x10
[ 1.803009] [<ffffffff81b8b510>] ? restore_args+0x0/0x30
[ 1.804049] [<ffffffff82a546ec>] ? kernel_init+0x0/0xca
[ 1.805008] [<ffffffff810039a0>] ? kernel_thread_helper+0x0/0x10
[ 1.806006] Testing a backtrace from irq context.
[ 1.807006] The following trace is a kernel self test and not a bug!
[ 1.808055] Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.33-rc8-tip+ #16697
[ 1.809005] Call Trace:
[ 1.810005] <IRQ> [<ffffffff8106da08>] ? trace_hardirqs_on_caller+0xff/0x144
[ 1.812007] [<ffffffff8107e48f>] backtrace_test_irq_callback+0x9/0x17
[ 1.813007] [<ffffffff810486a4>] tasklet_action+0x87/0xef
[ 1.814007] [<ffffffff81049524>] __do_softirq+0xf3/0x1c8
[ 1.815006] [<ffffffff81003a9c>] call_softirq+0x1c/0x28
[ 1.816004] <EOI> [<ffffffff81005892>] ? do_softirq+0x46/0x9e
[ 1.818006] [<ffffffff81048da9>] run_ksoftirqd+0x6f/0x109
[ 1.819006] [<ffffffff81048d3a>] ? run_ksoftirqd+0x0/0x109
[ 1.820008] [<ffffffff8105c222>] kthread+0x95/0x9d
[ 1.821007] [<ffffffff8106da22>] ? trace_hardirqs_on_caller+0x119/0x144
[ 1.822006] [<ffffffff810039a4>] kernel_thread_helper+0x4/0x10
[ 1.823006] [<ffffffff81b8b510>] ? restore_args+0x0/0x30
[ 1.824007] [<ffffffff8105c18d>] ? kthread+0x0/0x9d
[ 1.825006] [<ffffffff810039a0>] ? kernel_thread_helper+0x0/0x10
[ 1.826024] Testing a saved backtrace.
[ 1.829078] The following trace is a kernel self test and not a bug!
[ 1.836008] [<ffffffff8100e3cf>] save_stack_trace+0x2a/0x47
[ 1.841006] [<ffffffff8107e57a>] backtrace_regression_test+0xdd/0xff
[ 1.848006] [<ffffffff810001ef>] do_one_initcall+0x59/0x159
[ 1.854006] [<ffffffff82a546da>] do_basic_setup+0x4f/0x61
[ 1.859006] [<ffffffff82a54773>] kernel_init+0x87/0xca
[ 1.864006] [<ffffffff810039a4>] kernel_thread_helper+0x4/0x10
[ 1.870006] [<ffffffffffffffff>] 0xffffffffffffffff
[ 1.875006] ====[ end of backtrace testing ]====
[ 1.880008] initcall backtrace_regression_test+0x0/0xff returned 0 after 91796 usecs
[ 1.888009] calling pid_namespaces_init+0x0/0x2d @ 1
[ 1.893021] initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 usecs
[ 1.900008] calling audit_init+0x0/0x153 @ 1
[ 1.904006] audit: initializing netlink socket (disabled)
[ 1.910007] type=2000 audit(1266195305.909:1): initialized
[ 1.915019] initcall audit_init+0x0/0x153 returned 0 after 10742 usecs
[ 1.922008] calling audit_tree_init+0x0/0x49 @ 1
[ 1.926011] initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs
[ 1.933008] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 1.938022] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 usecs
[ 1.945008] calling init_events+0x0/0x61 @ 1
[ 1.949015] initcall init_events+0x0/0x61 returned 0 after 0 usecs
[ 1.955008] calling init_sched_switch_trace+0x0/0x12 @ 1
[ 1.961011] initcall init_sched_switch_trace+0x0/0x12 returned 0 after 0 usecs
[ 1.968008] calling perf_event_sysfs_init+0x0/0x19 @ 1
[ 1.973033] initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 1.980009] calling init_per_zone_wmark_min+0x0/0x67 @ 1
[ 1.986061] initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 0 usecs
[ 1.993008] calling kswapd_init+0x0/0x20 @ 1
[ 1.997899] initcall kswapd_init+0x0/0x20 returned 0 after 0 usecs
[ 2.004111] calling setup_vmstat+0x0/0xbe @ 1
[ 2.008112] initcall setup_vmstat+0x0/0xbe returned 0 after 0 usecs
[ 2.015065] calling mm_sysfs_init+0x0/0x29 @ 1
[ 2.019019] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 2.026008] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 2.030019] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs
[ 2.037008] calling procswaps_init+0x0/0x22 @ 1
[ 2.042018] initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs
[ 2.048009] calling hugetlb_init+0x0/0x22d @ 1
[ 2.053009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.059038] initcall hugetlb_init+0x0/0x22d returned 0 after 5859 usecs
[ 2.066007] calling ksm_init+0x0/0x148 @ 1
[ 2.070610] initcall ksm_init+0x0/0x148 returned 0 after 0 usecs
[ 2.076070] calling slab_proc_init+0x0/0x25 @ 1
[ 2.081030] initcall slab_proc_init+0x0/0x25 returned 0 after 0 usecs
[ 2.087008] calling slab_sysfs_init+0x0/0xee @ 1
[ 2.131126] initcall slab_sysfs_init+0x0/0xee returned 0 after 38085 usecs
[ 2.132070] calling fasync_init+0x0/0x2a @ 1
[ 2.133402] initcall fasync_init+0x0/0x2a returned 0 after 0 usecs
[ 2.134056] calling proc_filesystems_init+0x0/0x22 @ 1
[ 2.135028] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
[ 2.136008] calling dnotify_init+0x0/0x80 @ 1
[ 2.138348] initcall dnotify_init+0x0/0x80 returned 0 after 976 usecs
[ 2.139052] calling inotify_setup+0x0/0x12 @ 1
[ 2.140008] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
[ 2.141008] calling aio_setup+0x0/0xa2 @ 1
[ 2.143270] initcall aio_setup+0x0/0xa2 returned 0 after 976 usecs
[ 2.144010] calling proc_locks_init+0x0/0x22 @ 1
[ 2.145023] initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs
[ 2.146008] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 2.147153] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 0 usecs
[ 2.148007] calling init_mbcache+0x0/0x14 @ 1
[ 2.149009] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
[ 2.150007] calling dquot_init+0x0/0xdb @ 1
[ 2.151047] VFS: Disk quotas dquot_6.5.2
[ 2.152331] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.153051] initcall dquot_init+0x0/0xdb returned 0 after 1953 usecs
[ 2.154009] calling init_v1_quota_format+0x0/0x12 @ 1
[ 2.155028] initcall init_v1_quota_format+0x0/0x12 returned 0 after 0 usecs
[ 2.156007] calling init_v2_quota_format+0x0/0x22 @ 1
[ 2.157060] initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
[ 2.158007] calling proc_cmdline_init+0x0/0x22 @ 1
[ 2.159021] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
[ 2.160007] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 2.161061] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
[ 2.162048] calling proc_devices_init+0x0/0x22 @ 1
[ 2.163020] initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
[ 2.164008] calling proc_interrupts_init+0x0/0x22 @ 1
[ 2.165018] initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
[ 2.166058] calling proc_loadavg_init+0x0/0x22 @ 1
[ 2.167018] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[ 2.168007] calling proc_meminfo_init+0x0/0x22 @ 1
[ 2.169028] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[ 2.170047] calling proc_stat_init+0x0/0x22 @ 1
[ 2.171020] initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
[ 2.172048] calling proc_uptime_init+0x0/0x22 @ 1
[ 2.173020] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
[ 2.174007] calling proc_version_init+0x0/0x22 @ 1
[ 2.175018] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[ 2.176058] calling proc_softirqs_init+0x0/0x22 @ 1
[ 2.177018] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
[ 2.178007] calling proc_kmsg_init+0x0/0x25 @ 1
[ 2.179018] initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
[ 2.180047] calling proc_page_init+0x0/0x42 @ 1
[ 2.181030] initcall proc_page_init+0x0/0x42 returned 0 after 0 usecs
[ 2.182048] calling configfs_init+0x0/0xb3 @ 1
[ 2.184337] initcall configfs_init+0x0/0xb3 returned 0 after 0 usecs
[ 2.185056] calling init_devpts_fs+0x0/0x4c @ 1
[ 2.186223] initcall init_devpts_fs+0x0/0x4c returned 0 after 0 usecs
[ 2.187008] calling init_dlm+0x0/0x88 @ 1
[ 2.188347] device: 'dlm-control': device_add
[ 2.189154] PM: Adding info for No Bus:dlm-control
[ 2.190221] device: 'dlm-monitor': device_add
[ 2.191089] PM: Adding info for No Bus:dlm-monitor
[ 2.193088] device: 'dlm_plock': device_add
[ 2.194039] PM: Adding info for No Bus:dlm_plock
[ 2.196159] DLM (built Feb 14 2010 20:56:43) installed
[ 2.197103] initcall init_dlm+0x0/0x88 returned 0 after 8789 usecs
[ 2.198009] calling init_reiserfs_fs+0x0/0x6b @ 1
[ 2.199333] initcall init_reiserfs_fs+0x0/0x6b returned 0 after 0 usecs
[ 2.200056] calling init_ext3_fs+0x0/0x71 @ 1
[ 2.202394] initcall init_ext3_fs+0x0/0x71 returned 0 after 976 usecs
[ 2.203057] calling init_ext2_fs+0x0/0x71 @ 1
[ 2.205420] initcall init_ext2_fs+0x0/0x71 returned 0 after 976 usecs
[ 2.206010] calling journal_init+0x0/0x5b @ 1
[ 2.208417] initcall journal_init+0x0/0x5b returned 0 after 976 usecs
[ 2.209010] calling journal_init+0x0/0x72 @ 1
[ 2.212361] initcall journal_init+0x0/0x72 returned 0 after 1953 usecs
[ 2.214057] calling init_ramfs_fs+0x0/0x12 @ 1
[ 2.215011] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs
[ 2.216007] calling init_hugetlbfs_fs+0x0/0x98 @ 1
[ 2.218252] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 976 usecs
[ 2.219052] calling init_coda+0x0/0xa9 @ 1
[ 2.220330] device class 'coda': registering
[ 2.221366] device: 'cfs0': device_add
[ 2.222050] PM: Adding info for No Bus:cfs0
[ 2.223203] device: 'cfs1': device_add
[ 2.224084] PM: Adding info for No Bus:cfs1
[ 2.226185] device: 'cfs2': device_add
[ 2.228037] PM: Adding info for No Bus:cfs2
[ 2.229210] device: 'cfs3': device_add
[ 2.230092] PM: Adding info for No Bus:cfs3
[ 2.231212] device: 'cfs4': device_add
[ 2.232082] PM: Adding info for No Bus:cfs4
[ 2.234170] initcall init_coda+0x0/0xa9 returned 0 after 13671 usecs
[ 2.235009] calling init_fat_fs+0x0/0x4f @ 1
[ 2.237344] initcall init_fat_fs+0x0/0x4f returned 0 after 976 usecs
[ 2.238102] calling init_vfat_fs+0x0/0x12 @ 1
[ 2.239011] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
[ 2.240007] calling init_nfsd+0x0/0xbc @ 1
[ 2.241006] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.243888] initcall init_nfsd+0x0/0xbc returned 0 after 1953 usecs
[ 2.244008] calling init_nlm+0x0/0x22 @ 1
[ 2.245012] initcall init_nlm+0x0/0x22 returned 0 after 0 usecs
[ 2.246052] calling init_nls_cp437+0x0/0x12 @ 1
[ 2.247038] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
[ 2.248007] calling init_nls_cp737+0x0/0x12 @ 1
[ 2.249008] initcall init_nls_cp737+0x0/0x12 returned 0 after 0 usecs
[ 2.250048] calling init_nls_cp775+0x0/0x12 @ 1
[ 2.251008] initcall init_nls_cp775+0x0/0x12 returned 0 after 0 usecs
[ 2.252007] calling init_nls_cp850+0x0/0x12 @ 1
[ 2.253008] initcall init_nls_cp850+0x0/0x12 returned 0 after 0 usecs
[ 2.254048] calling init_nls_cp852+0x0/0x12 @ 1
[ 2.255008] initcall init_nls_cp852+0x0/0x12 returned 0 after 0 usecs
[ 2.256007] calling init_nls_cp855+0x0/0x12 @ 1
[ 2.257008] initcall init_nls_cp855+0x0/0x12 returned 0 after 0 usecs
[ 2.258047] calling init_nls_cp857+0x0/0x12 @ 1
[ 2.259008] initcall init_nls_cp857+0x0/0x12 returned 0 after 0 usecs
[ 2.260007] calling init_nls_cp861+0x0/0x12 @ 1
[ 2.261008] initcall init_nls_cp861+0x0/0x12 returned 0 after 0 usecs
[ 2.263008] calling init_nls_cp865+0x0/0x12 @ 1
[ 2.264008] initcall init_nls_cp865+0x0/0x12 returned 0 after 0 usecs
[ 2.265007] calling init_nls_cp866+0x0/0x12 @ 1
[ 2.266048] initcall init_nls_cp866+0x0/0x12 returned 0 after 0 usecs
[ 2.267007] calling init_nls_cp869+0x0/0x12 @ 1
[ 2.268008] initcall init_nls_cp869+0x0/0x12 returned 0 after 0 usecs
[ 2.269007] calling init_nls_cp874+0x0/0x12 @ 1
[ 2.270048] initcall init_nls_cp874+0x0/0x12 returned 0 after 0 usecs
[ 2.271007] calling init_nls_cp932+0x0/0x12 @ 1
[ 2.272008] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 usecs
[ 2.273007] calling init_nls_euc_jp+0x0/0x48 @ 1
[ 2.274049] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 usecs
[ 2.275007] calling init_nls_cp936+0x0/0x12 @ 1
[ 2.276008] initcall init_nls_cp936+0x0/0x12 returned 0 after 0 usecs
[ 2.277007] calling init_nls_cp949+0x0/0x12 @ 1
[ 2.278048] initcall init_nls_cp949+0x0/0x12 returned 0 after 0 usecs
[ 2.279007] calling init_nls_cp950+0x0/0x12 @ 1
[ 2.280008] initcall init_nls_cp950+0x0/0x12 returned 0 after 0 usecs
[ 2.281009] calling init_nls_ascii+0x0/0x12 @ 1
[ 2.282048] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
[ 2.283007] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 2.284008] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 2.285007] calling init_nls_iso8859_4+0x0/0x12 @ 1
[ 2.286048] initcall init_nls_iso8859_4+0x0/0x12 returned 0 after 0 usecs
[ 2.287008] calling init_nls_iso8859_6+0x0/0x12 @ 1
[ 2.288008] initcall init_nls_iso8859_6+0x0/0x12 returned 0 after 0 usecs
[ 2.289007] calling init_nls_iso8859_7+0x0/0x12 @ 1
[ 2.290048] initcall init_nls_iso8859_7+0x0/0x12 returned 0 after 0 usecs
[ 2.291007] calling init_nls_cp1255+0x0/0x12 @ 1
[ 2.292009] initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 usecs
[ 2.293007] calling init_nls_iso8859_9+0x0/0x12 @ 1
[ 2.294048] initcall init_nls_iso8859_9+0x0/0x12 returned 0 after 0 usecs
[ 2.295008] calling init_nls_iso8859_13+0x0/0x12 @ 1
[ 2.296008] initcall init_nls_iso8859_13+0x0/0x12 returned 0 after 0 usecs
[ 2.297007] calling init_nls_koi8_r+0x0/0x12 @ 1
[ 2.298010] initcall init_nls_koi8_r+0x0/0x12 returned 0 after 0 usecs
[ 2.299007] calling init_nls_koi8_u+0x0/0x12 @ 1
[ 2.300008] initcall init_nls_koi8_u+0x0/0x12 returned 0 after 0 usecs
[ 2.301007] calling init_nls_koi8_ru+0x0/0x48 @ 1
[ 2.302058] initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 0 usecs
[ 2.303008] calling init_nls_utf8+0x0/0x29 @ 1
[ 2.304009] initcall init_nls_utf8+0x0/0x29 returned 0 after 0 usecs
[ 2.305007] calling init_smb_fs+0x0/0x72 @ 1
[ 2.307407] initcall init_smb_fs+0x0/0x72 returned 0 after 976 usecs
[ 2.308010] calling init_ncp_fs+0x0/0x63 @ 1
[ 2.309322] initcall init_ncp_fs+0x0/0x63 returned 0 after 0 usecs
[ 2.310056] calling init_autofs_fs+0x0/0x12 @ 1
[ 2.311010] initcall init_autofs_fs+0x0/0x12 returned 0 after 0 usecs
[ 2.312007] calling fuse_init+0x0/0xdb @ 1
[ 2.313006] fuse init (API version 7.13)
[ 2.315348] device: 'fuse': device_add
[ 2.316100] PM: Adding info for No Bus:fuse
[ 2.318130] initcall fuse_init+0x0/0xdb returned 0 after 4882 usecs
[ 2.319010] calling init_udf_fs+0x0/0x63 @ 1
[ 2.321239] initcall init_udf_fs+0x0/0x63 returned 0 after 976 usecs
[ 2.322009] calling init_jfs_fs+0x0/0x265 @ 1
[ 2.323411] JFS: nTxBlock = 7179, nTxLock = 57435
[ 2.332103] initcall init_jfs_fs+0x0/0x265 returned 0 after 8789 usecs
[ 2.333010] calling init_xfs_fs+0x0/0xb3 @ 1
[ 2.334006] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[ 2.342433] SGI XFS Quota Management subsystem
[ 2.343043] initcall init_xfs_fs+0x0/0xb3 returned 0 after 8789 usecs
[ 2.344008] calling ocfs2_init+0x0/0x292 @ 1
[ 2.345006] OCFS2 1.5.0
[ 2.348309] initcall ocfs2_init+0x0/0x292 returned 0 after 2929 usecs
[ 2.355161] calling ocfs2_stack_glue_init+0x0/0x97 @ 1
[ 2.360508] initcall ocfs2_stack_glue_init+0x0/0x97 returned 0 after 0 usecs
[ 2.361010] calling init_o2nm+0x0/0xa9 @ 1
[ 2.362006] OCFS2 Node Manager 1.5.0
[ 2.369102] initcall init_o2nm+0x0/0xa9 returned 0 after 6835 usecs
[ 2.370008] calling init_btrfs_fs+0x0/0x90 @ 1
[ 2.374343] device: 'btrfs-control': device_add
[ 2.375110] PM: Adding info for No Bus:btrfs-control
[ 2.376228] Btrfs loaded
[ 2.377050] initcall init_btrfs_fs+0x0/0x90 returned 0 after 5859 usecs
[ 2.378009] calling ipc_init+0x0/0x2f @ 1
[ 2.379031] msgmni has been set to 1794
[ 2.380033] initcall ipc_init+0x0/0x2f returned 0 after 976 usecs
[ 2.381060] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 2.382016] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 usecs
[ 2.383007] calling init_mqueue_fs+0x0/0xc8 @ 1
[ 2.385389] initcall init_mqueue_fs+0x0/0xc8 returned 0 after 976 usecs
[ 2.386010] calling key_proc_init+0x0/0x33 @ 1
[ 2.387022] initcall key_proc_init+0x0/0x33 returned 0 after 0 usecs
[ 2.388008] calling init_sel_fs+0x0/0x68 @ 1
[ 2.390641] initcall init_sel_fs+0x0/0x68 returned 0 after 976 usecs
[ 2.392008] calling selnl_init+0x0/0x4d @ 1
[ 2.393084] initcall selnl_init+0x0/0x4d returned 0 after 0 usecs
[ 2.394049] calling sel_netif_init+0x0/0x66 @ 1
[ 2.395015] initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs
[ 2.396008] calling sel_netnode_init+0x0/0x74 @ 1
[ 2.397011] initcall sel_netnode_init+0x0/0x74 returned 0 after 0 usecs
[ 2.398061] calling sel_netport_init+0x0/0x74 @ 1
[ 2.399012] initcall sel_netport_init+0x0/0x74 returned 0 after 0 usecs
[ 2.400007] calling aurule_init+0x0/0x37 @ 1
[ 2.401009] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs
[ 2.402051] calling crypto_wq_init+0x0/0x32 @ 1
[ 2.403111] initcall crypto_wq_init+0x0/0x32 returned 0 after 0 usecs
[ 2.404049] calling crypto_algapi_init+0x0/0xd @ 1
[ 2.405026] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[ 2.406008] calling skcipher_module_init+0x0/0x36 @ 1
[ 2.407008] initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs
[ 2.408059] calling chainiv_module_init+0x0/0x12 @ 1
[ 2.409012] initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.410007] calling eseqiv_module_init+0x0/0x12 @ 1
[ 2.411009] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.412049] calling seqiv_module_init+0x0/0x12 @ 1
[ 2.413011] initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.414049] calling hmac_module_init+0x0/0x12 @ 1
[ 2.415010] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.416007] calling vmac_module_init+0x0/0x12 @ 1
[ 2.417009] initcall vmac_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.418059] calling md4_mod_init+0x0/0x12 @ 1
[ 2.420142] initcall md4_mod_init+0x0/0x12 returned 0 after 976 usecs
[ 2.421009] calling md5_mod_init+0x0/0x12 @ 1
[ 2.422089] initcall md5_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.423056] calling rmd128_mod_init+0x0/0x12 @ 1
[ 2.424119] initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.425056] calling rmd256_mod_init+0x0/0x12 @ 1
[ 2.426082] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.427055] calling sha1_generic_mod_init+0x0/0x12 @ 1
[ 2.428088] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.429056] calling sha256_generic_mod_init+0x0/0x3f @ 1
[ 2.430132] initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 0 usecs
[ 2.432056] calling sha512_generic_mod_init+0x0/0x3f @ 1
[ 2.433130] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 usecs
[ 2.434055] calling wp512_mod_init+0x0/0x64 @ 1
[ 2.436204] initcall wp512_mod_init+0x0/0x64 returned 0 after 976 usecs
[ 2.437010] calling crypto_ecb_module_init+0x0/0x12 @ 1
[ 2.438009] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.439007] calling crypto_cbc_module_init+0x0/0x12 @ 1
[ 2.440060] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.441007] calling crypto_pcbc_module_init+0x0/0x12 @ 1
[ 2.442009] initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.443007] calling crypto_cts_module_init+0x0/0x12 @ 1
[ 2.444052] initcall crypto_cts_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.445057] calling crypto_module_init+0x0/0x12 @ 1
[ 2.446011] initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.447007] calling crypto_module_init+0x0/0x12 @ 1
[ 2.448009] initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.449058] calling crypto_ctr_module_init+0x0/0x3e @ 1
[ 2.450011] initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 0 usecs
[ 2.451007] calling crypto_gcm_module_init+0x0/0x84 @ 1
[ 2.452023] initcall crypto_gcm_module_init+0x0/0x84 returned 0 after 0 usecs
[ 2.453048] calling crypto_ccm_module_init+0x0/0x60 @ 1
[ 2.455015] initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 0 usecs
[ 2.456048] calling cryptd_init+0x0/0x2e @ 1
[ 2.457019] initcall cryptd_init+0x0/0x2e returned 0 after 0 usecs
[ 2.458008] calling des_generic_mod_init+0x0/0x3f @ 1
[ 2.460258] initcall des_generic_mod_init+0x0/0x3f returned 0 after 976 usecs
[ 2.461010] calling fcrypt_mod_init+0x0/0x12 @ 1
[ 2.462127] alg: No test for fcrypt (fcrypt-generic)
[ 2.467492] initcall fcrypt_mod_init+0x0/0x12 returned 0 after 4882 usecs
[ 2.468009] calling blowfish_mod_init+0x0/0x12 @ 1
[ 2.470211] initcall blowfish_mod_init+0x0/0x12 returned 0 after 976 usecs
[ 2.471009] calling serpent_mod_init+0x0/0x3f @ 1
[ 2.473213] initcall serpent_mod_init+0x0/0x3f returned 0 after 976 usecs
[ 2.474010] calling aes_init+0x0/0x12 @ 1
[ 2.475195] initcall aes_init+0x0/0x12 returned 0 after 0 usecs
[ 2.476055] calling camellia_init+0x0/0x12 @ 1
[ 2.477199] initcall camellia_init+0x0/0x12 returned 0 after 0 usecs
[ 2.478055] calling cast5_mod_init+0x0/0x12 @ 1
[ 2.479111] initcall cast5_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.480055] calling cast6_mod_init+0x0/0x12 @ 1
[ 2.481101] initcall cast6_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.482055] calling arc4_init+0x0/0x12 @ 1
[ 2.483111] initcall arc4_init+0x0/0x12 returned 0 after 0 usecs
[ 2.484055] calling tea_mod_init+0x0/0x64 @ 1
[ 2.485172] initcall tea_mod_init+0x0/0x64 returned 0 after 0 usecs
[ 2.486064] calling khazad_mod_init+0x0/0x12 @ 1
[ 2.488077] initcall khazad_mod_init+0x0/0x12 returned 0 after 976 usecs
[ 2.489009] calling anubis_mod_init+0x0/0x12 @ 1
[ 2.490170] initcall anubis_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.491055] calling salsa20_generic_mod_init+0x0/0x12 @ 1
[ 2.492087] initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.493055] calling deflate_mod_init+0x0/0x12 @ 1
[ 2.494743] initcall deflate_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.495053] calling zlib_mod_init+0x0/0x12 @ 1
[ 2.497462] initcall zlib_mod_init+0x0/0x12 returned 0 after 976 usecs
[ 2.498009] calling michael_mic_init+0x0/0x12 @ 1
[ 2.500070] initcall michael_mic_init+0x0/0x12 returned 0 after 976 usecs
[ 2.501009] calling crc32c_mod_init+0x0/0x12 @ 1
[ 2.502188] initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.503056] calling crypto_authenc_module_init+0x0/0x12 @ 1
[ 2.504011] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 usecs
[ 2.505007] calling krng_mod_init+0x0/0x12 @ 1
[ 2.506093] alg: No test for stdrng (krng)
[ 2.510349] initcall krng_mod_init+0x0/0x12 returned 0 after 3906 usecs
[ 2.511009] calling ghash_mod_init+0x0/0x12 @ 1
[ 2.512184] initcall ghash_mod_init+0x0/0x12 returned 0 after 0 usecs
[ 2.513056] calling async_pq_init+0x0/0x44 @ 1
[ 2.514011] initcall async_pq_init+0x0/0x44 returned 0 after 0 usecs
[ 2.515008] calling proc_genhd_init+0x0/0x3c @ 1
[ 2.516032] initcall proc_genhd_init+0x0/0x3c returned 0 after 0 usecs
[ 2.517058] calling bsg_init+0x0/0x12e @ 1
[ 2.519264] device class 'bsg': registering
[ 2.520224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.521057] initcall bsg_init+0x0/0x12e returned 0 after 2929 usecs
[ 2.522008] calling noop_init+0x0/0x14 @ 1
[ 2.523042] io scheduler noop registered (default)
[ 2.524007] initcall noop_init+0x0/0x14 returned 0 after 976 usecs
[ 2.525059] calling deadline_init+0x0/0x14 @ 1
[ 2.526007] io scheduler deadline registered
[ 2.527007] initcall deadline_init+0x0/0x14 returned 0 after 976 usecs
[ 2.528007] calling cfq_init+0x0/0x94 @ 1
[ 2.529381] io scheduler cfq registered
[ 2.530051] initcall cfq_init+0x0/0x94 returned 0 after 976 usecs
[ 2.531009] calling debug_objects_init_debugfs+0x0/0x64 @ 1
[ 2.532083] initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 usecs
[ 2.533008] calling libcrc32c_mod_init+0x0/0x2c @ 1
[ 2.534065] initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
[ 2.535007] calling percpu_counter_startup+0x0/0x19 @ 1
[ 2.536010] initcall percpu_counter_startup+0x0/0x19 returned 0 after 0 usecs
[ 2.537007] calling pci_proc_init+0x0/0x6a @ 1
[ 2.538454] initcall pci_proc_init+0x0/0x6a returned 0 after 0 usecs
[ 2.539048] calling pci_hotplug_init+0x0/0x1d @ 1
[ 2.540007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.541007] initcall pci_hotplug_init+0x0/0x1d returned 0 after 976 usecs
[ 2.542007] calling init_legacy+0x0/0x43 @ 1
[ 2.543463] initcall init_legacy+0x0/0x43 returned 0 after 0 usecs
[ 2.544008] calling pci_stub_init+0x0/0x139 @ 1
[ 2.545009] bus: 'pci': add driver pci-stub
[ 2.547241] pci-stub: invalid id string ""
[ 2.548050] initcall pci_stub_init+0x0/0x139 returned 0 after 2929 usecs
[ 2.549008] calling platform_lcd_init+0x0/0x12 @ 1
[ 2.550008] bus: 'platform': add driver platform-lcd
[ 2.551227] initcall platform_lcd_init+0x0/0x12 returned 0 after 976 usecs
[ 2.552100] calling progearbl_init+0x0/0x55 @ 1
[ 2.553009] bus: 'platform': add driver progear-bl
[ 2.554228] Registering platform device 'progear-bl'. Parent at platform
[ 2.555059] device: 'progear-bl': device_add
[ 2.557010] bus: 'platform': add device progear-bl
[ 2.558034] PM: Adding info for platform:progear-bl
[ 2.560083] bus: 'platform': driver_probe_device: matched device progear-bl with driver progear-bl
[ 2.561010] bus: 'platform': really_probe: probing driver progear-bl with device progear-bl
[ 2.562038] ALI M7101 PMU not found.
[ 2.563068] initcall progearbl_init+0x0/0x55 returned 0 after 9765 usecs
[ 2.564058] calling mbp_init+0x0/0xf9 @ 1
[ 2.565010] initcall mbp_init+0x0/0xf9 returned -19 after 0 usecs
[ 2.566007] calling kb3886_init+0x0/0x3a @ 1
[ 2.567007] initcall kb3886_init+0x0/0x3a returned -19 after 0 usecs
[ 2.568048] calling wm831x_backlight_init+0x0/0x12 @ 1
[ 2.569007] bus: 'platform': add driver wm831x-backlight
[ 2.570233] initcall wm831x_backlight_init+0x0/0x12 returned 0 after 976 usecs
[ 2.571049] calling adp5520_bl_init+0x0/0x12 @ 1
[ 2.572008] bus: 'platform': add driver adp5520-backlight
[ 2.573228] initcall adp5520_bl_init+0x0/0x12 returned 0 after 976 usecs
[ 2.575008] calling display_class_init+0x0/0x7e @ 1
[ 2.576009] device class 'display': registering
[ 2.577221] initcall display_class_init+0x0/0x7e returned 0 after 976 usecs
[ 2.578055] calling cyber2000fb_init+0x0/0xd1 @ 1
[ 2.579010] bus: 'pci': add driver CyberPro
[ 2.581190] initcall cyber2000fb_init+0x0/0xd1 returned 0 after 1953 usecs
[ 2.582009] calling pm2fb_init+0x0/0x4b @ 1
[ 2.583008] bus: 'pci': add driver pm2fb
[ 2.584247] initcall pm2fb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.585099] calling pm3fb_init+0x0/0x4b @ 1
[ 2.586009] bus: 'pci': add driver pm3fb
[ 2.587246] initcall pm3fb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.588055] calling matroxfb_init+0x0/0x68 @ 1
[ 2.589010] bus: 'pci': add driver matroxfb
[ 2.590250] initcall matroxfb_init+0x0/0x68 returned 0 after 976 usecs
[ 2.591056] calling matroxfb_crtc2_init+0x0/0x2d @ 1
[ 2.592009] initcall matroxfb_crtc2_init+0x0/0x2d returned 0 after 0 usecs
[ 2.593007] calling i2c_matroxfb_init+0x0/0x2b @ 1
[ 2.594007] initcall i2c_matroxfb_init+0x0/0x2b returned 0 after 0 usecs
[ 2.595059] calling rivafb_init+0x0/0x4b @ 1
[ 2.596006] rivafb_setup START
[ 2.597007] bus: 'pci': add driver rivafb
[ 2.598261] initcall rivafb_init+0x0/0x4b returned 0 after 1953 usecs
[ 2.599091] calling atyfb_init+0x0/0x71 @ 1
[ 2.600009] bus: 'pci': add driver atyfb
[ 2.601249] initcall atyfb_init+0x0/0x71 returned 0 after 976 usecs
[ 2.602057] calling aty128fb_init+0x0/0x4b @ 1
[ 2.603009] bus: 'pci': add driver aty128fb
[ 2.605246] initcall aty128fb_init+0x0/0x4b returned 0 after 1953 usecs
[ 2.606009] calling sisfb_init+0x0/0x4b @ 1
[ 2.607008] bus: 'pci': add driver sisfb
[ 2.608247] initcall sisfb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.609099] calling viafb_init+0x0/0x63 @ 1
[ 2.610008] VIA Graphics Intergration Chipset framebuffer 2.4 initializing
[ 2.611007] bus: 'pci': add driver viafb
[ 2.613280] initcall viafb_init+0x0/0x63 returned 0 after 2929 usecs
[ 2.614009] calling kyrofb_init+0x0/0x4b @ 1
[ 2.615008] bus: 'pci': add driver kyrofb
[ 2.616251] initcall kyrofb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.617099] calling savagefb_init+0x0/0x75 @ 1
[ 2.618009] bus: 'pci': add driver savagefb
[ 2.619250] initcall savagefb_init+0x0/0x75 returned 0 after 976 usecs
[ 2.620055] calling gx1fb_init+0x0/0x4b @ 1
[ 2.621009] bus: 'pci': add driver gx1fb
[ 2.622258] initcall gx1fb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.623055] calling gxfb_init+0x0/0x82 @ 1
[ 2.624009] bus: 'pci': add driver gxfb
[ 2.625250] initcall gxfb_init+0x0/0x82 returned 0 after 976 usecs
[ 2.626055] calling neofb_init+0x0/0x4b @ 1
[ 2.627009] bus: 'pci': add driver neofb
[ 2.628249] initcall neofb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.629055] calling tdfxfb_init+0x0/0x4b @ 1
[ 2.631010] bus: 'pci': add driver tdfxfb
[ 2.632250] initcall tdfxfb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.633099] calling imsttfb_init+0x0/0x4b @ 1
[ 2.634009] bus: 'pci': add driver imsttfb
[ 2.635249] initcall imsttfb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.636055] calling tridentfb_init+0x0/0x4b @ 1
[ 2.637009] bus: 'pci': add driver tridentfb
[ 2.638252] initcall tridentfb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.639055] calling vmlfb_init+0x0/0x96 @ 1
[ 2.640007] vmlfb: initializing
[ 2.641008] bus: 'pci': add driver vmlfb
[ 2.642247] initcall vmlfb_init+0x0/0x96 returned 0 after 1953 usecs
[ 2.644057] calling s3fb_init+0x0/0x4b @ 1
[ 2.645008] bus: 'pci': add driver s3fb
[ 2.646271] initcall s3fb_init+0x0/0x4b returned 0 after 976 usecs
[ 2.647055] calling hecubafb_init+0x0/0x12 @ 1
[ 2.648009] bus: 'platform': add driver hecubafb
[ 2.650182] initcall hecubafb_init+0x0/0x12 returned 0 after 1953 usecs
[ 2.651009] calling n411_init+0x0/0x93 @ 1
[ 2.652006] no IO addresses supplied
[ 2.653007] initcall n411_init+0x0/0x93 returned -22 after 976 usecs
[ 2.655008] initcall n411_init+0x0/0x93 returned with error code -22
[ 2.656007] calling sstfb_init+0x0/0x4b @ 1
[ 2.657008] bus: 'pci': add driver sstfb
[ 2.659097] initcall sstfb_init+0x0/0x4b returned 0 after 1953 usecs
[ 2.660009] calling tmiofb_init+0x0/0x69 @ 1
[ 2.661008] bus: 'platform': add driver tmio-fb
[ 2.662224] initcall tmiofb_init+0x0/0x69 returned 0 after 976 usecs
[ 2.664055] calling metronomefb_init+0x0/0x12 @ 1
[ 2.665007] bus: 'platform': add driver metronomefb
[ 2.667107] initcall metronomefb_init+0x0/0x12 returned 0 after 1953 usecs
[ 2.668009] calling broadsheetfb_init+0x0/0x12 @ 1
[ 2.669007] bus: 'platform': add driver broadsheetfb
[ 2.671185] initcall broadsheetfb_init+0x0/0x12 returned 0 after 1953 usecs
[ 2.672009] calling s1d13xxxfb_init+0x0/0x2b @ 1
[ 2.673008] bus: 'platform': add driver s1d13xxxfb
[ 2.674226] initcall s1d13xxxfb_init+0x0/0x2b returned 0 after 976 usecs
[ 2.675099] calling sm501fb_init+0x0/0x12 @ 1
[ 2.676009] bus: 'platform': add driver sm501-fb
[ 2.678211] initcall sm501fb_init+0x0/0x12 returned 0 after 1953 usecs
[ 2.679009] calling mb862xxfb_init+0x0/0x1b @ 1
[ 2.680008] bus: 'pci': add driver mb862xxfb
[ 2.681248] initcall mb862xxfb_init+0x0/0x1b returned 0 after 976 usecs
[ 2.682100] calling rand_initialize+0x0/0x2c @ 1
[ 2.683053] initcall rand_initialize+0x0/0x2c returned 0 after 0 usecs
[ 2.684008] calling tty_init+0x0/0xf5 @ 1
[ 2.685026] device: 'tty': device_add
[ 2.686109] PM: Adding info for No Bus:tty
[ 2.688245] device: 'console': device_add
[ 2.689080] PM: Adding info for No Bus:console
[ 2.691235] device: 'tty0': device_add
[ 2.692037] PM: Adding info for No Bus:tty0
[ 2.693209] device class 'vc': registering
[ 2.694323] device: 'vcs': device_add
[ 2.695044] PM: Adding info for No Bus:vcs
[ 2.697143] device: 'vcsa': device_add
[ 2.698036] PM: Adding info for No Bus:vcsa
[ 2.699212] device: 'vcs1': device_add
[ 2.700082] PM: Adding info for No Bus:vcs1
[ 2.701212] device: 'vcsa1': device_add
[ 2.702090] PM: Adding info for No Bus:vcsa1
[ 2.704194] device: 'tty1': device_add
[ 2.705038] PM: Adding info for No Bus:tty1
[ 2.706215] device: 'tty2': device_add
[ 2.707082] PM: Adding info for No Bus:tty2
[ 2.708211] device: 'tty3': device_add
[ 2.709090] PM: Adding info for No Bus:tty3
[ 2.711116] device: 'tty4': device_add
[ 2.712036] PM: Adding info for No Bus:tty4
[ 2.713209] device: 'tty5': device_add
[ 2.714082] PM: Adding info for No Bus:tty5
[ 2.715210] device: 'tty6': device_add
[ 2.716100] PM: Adding info for No Bus:tty6
[ 2.717214] device: 'tty7': device_add
[ 2.718082] PM: Adding info for No Bus:tty7
[ 2.720171] device: 'tty8': device_add
[ 2.722038] PM: Adding info for No Bus:tty8
[ 2.723230] device: 'tty9': device_add
[ 2.724090] PM: Adding info for No Bus:tty9
[ 2.725214] device: 'tty10': device_add
[ 2.726083] PM: Adding info for No Bus:tty10
[ 2.727215] device: 'tty11': device_add
[ 2.728083] PM: Adding info for No Bus:tty11
[ 2.729211] device: 'tty12': device_add
[ 2.730092] PM: Adding info for No Bus:tty12
[ 2.732179] device: 'tty13': device_add
[ 2.733083] PM: Adding info for No Bus:tty13
[ 2.734211] device: 'tty14': device_add
[ 2.735083] PM: Adding info for No Bus:tty14
[ 2.737238] device: 'tty15': device_add
[ 2.738046] PM: Adding info for No Bus:tty15
[ 2.739208] device: 'tty16': device_add
[ 2.740083] PM: Adding info for No Bus:tty16
[ 2.742219] device: 'tty17': device_add
[ 2.746131] PM: Adding info for No Bus:tty17
[ 2.750601] device: 'tty18': device_add
[ 2.754112] PM: Adding info for No Bus:tty18
[ 2.759173] device: 'tty19': device_add
[ 2.763092] PM: Adding info for No Bus:tty19
[ 2.767646] device: 'tty20': device_add
[ 2.771161] PM: Adding info for No Bus:tty20
[ 2.776250] device: 'tty21': device_add
[ 2.780104] PM: Adding info for No Bus:tty21
[ 2.784749] device: 'tty22': device_add
[ 2.788152] PM: Adding info for No Bus:tty22
[ 2.793350] device: 'tty23': device_add
[ 2.797113] PM: Adding info for No Bus:tty23
[ 2.802077] device: 'tty24': device_add
[ 2.803046] PM: Adding info for No Bus:tty24
[ 2.804219] device: 'tty25': device_add
[ 2.805093] PM: Adding info for No Bus:tty25
[ 2.806211] device: 'tty26': device_add
[ 2.807095] PM: Adding info for No Bus:tty26
[ 2.808212] device: 'tty27': device_add
[ 2.809084] PM: Adding info for No Bus:tty27
[ 2.810210] device: 'tty28': device_add
[ 2.811093] PM: Adding info for No Bus:tty28
[ 2.812265] device: 'tty29': device_add
[ 2.813085] PM: Adding info for No Bus:tty29
[ 2.814212] device: 'tty30': device_add
[ 2.815085] PM: Adding info for No Bus:tty30
[ 2.816214] device: 'tty31': device_add
[ 2.817093] PM: Adding info for No Bus:tty31
[ 2.818221] device: 'tty32': device_add
[ 2.819085] PM: Adding info for No Bus:tty32
[ 2.820214] device: 'tty33': device_add
[ 2.821084] PM: Adding info for No Bus:tty33
[ 2.822212] device: 'tty34': device_add
[ 2.823093] PM: Adding info for No Bus:tty34
[ 2.825183] device: 'tty35': device_add
[ 2.826085] PM: Adding info for No Bus:tty35
[ 2.827212] device: 'tty36': device_add
[ 2.828085] PM: Adding info for No Bus:tty36
[ 2.830186] device: 'tty37': device_add
[ 2.834108] PM: Adding info for No Bus:tty37
[ 2.838520] device: 'tty38': device_add
[ 2.842102] PM: Adding info for No Bus:tty38
[ 2.847144] device: 'tty39': device_add
[ 2.851100] PM: Adding info for No Bus:tty39
[ 2.855564] device: 'tty40': device_add
[ 2.859154] PM: Adding info for No Bus:tty40
[ 2.864172] device: 'tty41': device_add
[ 2.868107] PM: Adding info for No Bus:tty41
[ 2.872682] device: 'tty42': device_add
[ 2.876160] PM: Adding info for No Bus:tty42
[ 2.881215] device: 'tty43': device_add
[ 2.885125] PM: Adding info for No Bus:tty43
[ 2.889715] device: 'tty44': device_add
[ 2.893124] PM: Adding info for No Bus:tty44
[ 2.898212] device: 'tty45': device_add
[ 2.902124] PM: Adding info for No Bus:tty45
[ 2.906697] device: 'tty46': device_add
[ 2.910117] PM: Adding info for No Bus:tty46
[ 2.915176] device: 'tty47': device_add
[ 2.919114] PM: Adding info for No Bus:tty47
[ 2.923652] device: 'tty48': device_add
[ 2.927123] PM: Adding info for No Bus:tty48
[ 2.932140] device: 'tty49': device_add
[ 2.936114] PM: Adding info for No Bus:tty49
[ 2.940625] device: 'tty50': device_add
[ 2.944114] PM: Adding info for No Bus:tty50
[ 2.949137] device: 'tty51': device_add
[ 2.953123] PM: Adding info for No Bus:tty51
[ 2.957598] device: 'tty52': device_add
[ 2.961115] PM: Adding info for No Bus:tty52
[ 2.966147] device: 'tty53': device_add
[ 2.970116] PM: Adding info for No Bus:tty53
[ 2.974621] device: 'tty54': device_add
[ 2.978125] PM: Adding info for No Bus:tty54
[ 2.983140] device: 'tty55': device_add
[ 2.987114] PM: Adding info for No Bus:tty55
[ 2.991595] device: 'tty56': device_add
[ 2.995116] PM: Adding info for No Bus:tty56
[ 3.000138] device: 'tty57': device_add
[ 3.004124] PM: Adding info for No Bus:tty57
[ 3.008577] device: 'tty58': device_add
[ 3.012115] PM: Adding info for No Bus:tty58
[ 3.017138] device: 'tty59': device_add
[ 3.021114] PM: Adding info for No Bus:tty59
[ 3.025548] device: 'tty60': device_add
[ 3.029126] PM: Adding info for No Bus:tty60
[ 3.034236] device: 'tty61': device_add
[ 3.038097] PM: Adding info for No Bus:tty61
[ 3.042567] device: 'tty62': device_add
[ 3.046116] PM: Adding info for No Bus:tty62
[ 3.051213] device: 'tty63': device_add
[ 3.055106] PM: Adding info for No Bus:tty63
[ 3.059546] initcall tty_init+0x0/0xf5 returned 0 after 365234 usecs
[ 3.066089] calling pty_init+0x0/0xd @ 1
[ 3.070076] device: 'ptmx': device_add
[ 3.074045] PM: Adding info for No Bus:ptmx
[ 3.078483] initcall pty_init+0x0/0xd returned 0 after 7812 usecs
[ 3.084083] calling sysrq_init+0x0/0x25 @ 1
[ 3.089032] initcall sysrq_init+0x0/0x25 returned 0 after 0 usecs
[ 3.095008] calling rp_init+0x0/0x331 @ 1
[ 3.099007] RocketPort device driver module, version 2.09, 12-June-2003
[ 3.105059] No rocketport ports found; unloading driver
[ 3.111055] initcall rp_init+0x0/0x331 returned -6 after 11718 usecs
[ 3.117008] initcall rp_init+0x0/0x331 returned with error code -6
[ 3.123008] calling cy_init+0x0/0x11f @ 1
[ 3.128009] Cyclades driver 2.6 (built Feb 14 2010 20:56:36)
[ 3.133046] bus: 'pci': add driver cyclades
[ 3.138214] initcall cy_init+0x0/0x11f returned 0 after 9765 usecs
[ 3.144066] calling stallion_module_init+0x0/0x339 @ 1
[ 3.149007] Stallion Multiport Serial Driver: version 5.6.0
[ 3.155045] bus: 'pci': add driver stallion
[ 3.159665] device class 'staliomem': registering
[ 3.164724] device: 'staliomem0': device_add
[ 3.169114] PM: Adding info for No Bus:staliomem0
[ 3.174156] device: 'staliomem1': device_add
[ 3.178114] PM: Adding info for No Bus:staliomem1
[ 3.183460] device: 'staliomem2': device_add
[ 3.188008] PM: Adding info for No Bus:staliomem2
[ 3.192829] device: 'staliomem3': device_add
[ 3.197114] PM: Adding info for No Bus:staliomem3
[ 3.202182] initcall stallion_module_init+0x0/0x339 returned 0 after 51757 usecs
[ 3.209085] calling istallion_module_init+0x0/0x23d @ 1
[ 3.215007] Stallion Intelligent Multiport Serial Driver: version 5.6.0
[ 3.221062] istallion: failed to register serial driver
[ 3.227024] initcall istallion_module_init+0x0/0x23d returned -16 after 11718 usecs
[ 3.234008] initcall istallion_module_init+0x0/0x23d returned with error code -16
[ 3.242008] calling epca_module_init+0x0/0xb @ 1
[ 3.247010] DIGI epca driver version 1.3.0.1-LK2.6 loaded.
[ 3.252008] bus: 'pci': add driver epca
[ 3.256506] device: 'ttyD0': device_add
[ 3.260130] PM: Adding info for No Bus:ttyD0
[ 3.265216] device: 'ttyD1': device_add
[ 3.269106] PM: Adding info for No Bus:ttyD1
[ 3.273548] device: 'ttyD2': device_add
[ 3.277116] PM: Adding info for No Bus:ttyD2
[ 3.282211] device: 'ttyD3': device_add
[ 3.286108] PM: Adding info for No Bus:ttyD3
[ 3.290548] device: 'ttyD4': device_add
[ 3.294116] PM: Adding info for No Bus:ttyD4
[ 3.299210] device: 'ttyD5': device_add
[ 3.303096] PM: Adding info for No Bus:ttyD5
[ 3.307536] device: 'ttyD6': device_add
[ 3.311125] PM: Adding info for No Bus:ttyD6
[ 3.316213] device: 'ttyD7': device_add
[ 3.320097] PM: Adding info for No Bus:ttyD7
[ 3.324534] device: 'ttyD8': device_add
[ 3.328116] PM: Adding info for No Bus:ttyD8
[ 3.333208] device: 'ttyD9': device_add
[ 3.337106] PM: Adding info for No Bus:ttyD9
[ 3.341542] device: 'ttyD10': device_add
[ 3.345116] PM: Adding info for No Bus:ttyD10
[ 3.350193] device: 'ttyD11': device_add
[ 3.354113] PM: Adding info for No Bus:ttyD11
[ 3.359069] device: 'ttyD12': device_add
[ 3.360090] PM: Adding info for No Bus:ttyD12
[ 3.361209] device: 'ttyD13': device_add
[ 3.362124] PM: Adding info for No Bus:ttyD13
[ 3.363203] device: 'ttyD14': device_add
[ 3.364101] PM: Adding info for No Bus:ttyD14
[ 3.366134] device: 'ttyD15': device_add
[ 3.367096] PM: Adding info for No Bus:ttyD15
[ 3.368211] device: 'ttyD16': device_add
[ 3.369087] PM: Adding info for No Bus:ttyD16
[ 3.370210] device: 'ttyD17': device_add
[ 3.371081] PM: Adding info for No Bus:ttyD17
[ 3.373105] device: 'ttyD18': device_add
[ 3.374052] PM: Adding info for No Bus:ttyD18
[ 3.375210] device: 'ttyD19': device_add
[ 3.376089] PM: Adding info for No Bus:ttyD19
[ 3.377211] device: 'ttyD20': device_add
[ 3.378090] PM: Adding info for No Bus:ttyD20
[ 3.379212] device: 'ttyD21': device_add
[ 3.380099] PM: Adding info for No Bus:ttyD21
[ 3.381220] device: 'ttyD22': device_add
[ 3.382089] PM: Adding info for No Bus:ttyD22
[ 3.384212] device: 'ttyD23': device_add
[ 3.385089] PM: Adding info for No Bus:ttyD23
[ 3.386211] device: 'ttyD24': device_add
[ 3.387099] PM: Adding info for No Bus:ttyD24
[ 3.388211] device: 'ttyD25': device_add
[ 3.389090] PM: Adding info for No Bus:ttyD25
[ 3.391239] device: 'ttyD26': device_add
[ 3.392044] PM: Adding info for No Bus:ttyD26
[ 3.393207] device: 'ttyD27': device_add
[ 3.394099] PM: Adding info for No Bus:ttyD27
[ 3.395209] device: 'ttyD28': device_add
[ 3.396090] PM: Adding info for No Bus:ttyD28
[ 3.398233] device: 'ttyD29': device_add
[ 3.399044] PM: Adding info for No Bus:ttyD29
[ 3.400208] device: 'ttyD30': device_add
[ 3.401100] PM: Adding info for No Bus:ttyD30
[ 3.402210] device: 'ttyD31': device_add
[ 3.403091] PM: Adding info for No Bus:ttyD31
[ 3.405229] device: 'ttyD32': device_add
[ 3.406105] PM: Adding info for No Bus:ttyD32
[ 3.407251] device: 'ttyD33': device_add
[ 3.409027] PM: Adding info for No Bus:ttyD33
[ 3.410211] device: 'ttyD34': device_add
[ 3.411092] PM: Adding info for No Bus:ttyD34
[ 3.412213] device: 'ttyD35': device_add
[ 3.413091] PM: Adding info for No Bus:ttyD35
[ 3.414215] device: 'ttyD36': device_add
[ 3.415101] PM: Adding info for No Bus:ttyD36
[ 3.416213] device: 'ttyD37': device_add
[ 3.417101] PM: Adding info for No Bus:ttyD37
[ 3.419181] device: 'ttyD38': device_add
[ 3.420091] PM: Adding info for No Bus:ttyD38
[ 3.421212] device: 'ttyD39': device_add
[ 3.422109] PM: Adding info for No Bus:ttyD39
[ 3.423222] device: 'ttyD40': device_add
[ 3.424092] PM: Adding info for No Bus:ttyD40
[ 3.426240] device: 'ttyD41': device_add
[ 3.427045] PM: Adding info for No Bus:ttyD41
[ 3.428207] device: 'ttyD42': device_add
[ 3.429102] PM: Adding info for No Bus:ttyD42
[ 3.430209] device: 'ttyD43': device_add
[ 3.431091] PM: Adding info for No Bus:ttyD43
[ 3.433232] device: 'ttyD44': device_add
[ 3.434046] PM: Adding info for No Bus:ttyD44
[ 3.435210] device: 'ttyD45': device_add
[ 3.436101] PM: Adding info for No Bus:ttyD45
[ 3.437210] device: 'ttyD46': device_add
[ 3.438092] PM: Adding info for No Bus:ttyD46
[ 3.440233] device: 'ttyD47': device_add
[ 3.441046] PM: Adding info for No Bus:ttyD47
[ 3.442210] device: 'ttyD48': device_add
[ 3.443101] PM: Adding info for No Bus:ttyD48
[ 3.444210] device: 'ttyD49': device_add
[ 3.445093] PM: Adding info for No Bus:ttyD49
[ 3.447236] device: 'ttyD50': device_add
[ 3.448046] PM: Adding info for No Bus:ttyD50
[ 3.449208] device: 'ttyD51': device_add
[ 3.450101] PM: Adding info for No Bus:ttyD51
[ 3.451210] device: 'ttyD52': device_add
[ 3.452103] PM: Adding info for No Bus:ttyD52
[ 3.454224] device: 'ttyD53': device_add
[ 3.455047] PM: Adding info for No Bus:ttyD53
[ 3.456209] device: 'ttyD54': device_add
[ 3.457102] PM: Adding info for No Bus:ttyD54
[ 3.458211] device: 'ttyD55': device_add
[ 3.459093] PM: Adding info for No Bus:ttyD55
[ 3.461234] device: 'ttyD56': device_add
[ 3.462048] PM: Adding info for No Bus:ttyD56
[ 3.463208] device: 'ttyD57': device_add
[ 3.464104] PM: Adding info for No Bus:ttyD57
[ 3.465218] device: 'ttyD58': device_add
[ 3.466094] PM: Adding info for No Bus:ttyD58
[ 3.468235] device: 'ttyD59': device_add
[ 3.469048] PM: Adding info for No Bus:ttyD59
[ 3.470207] device: 'ttyD60': device_add
[ 3.471104] PM: Adding info for No Bus:ttyD60
[ 3.472209] device: 'ttyD61': device_add
[ 3.473094] PM: Adding info for No Bus:ttyD61
[ 3.475165] device: 'ttyD62': device_add
[ 3.476095] PM: Adding info for No Bus:ttyD62
[ 3.477215] device: 'ttyD63': device_add
[ 3.478104] PM: Adding info for No Bus:ttyD63
[ 3.479213] device: 'ttyD64': device_add
[ 3.480094] PM: Adding info for No Bus:ttyD64
[ 3.482244] device: 'ttyD65': device_add
[ 3.483059] PM: Adding info for No Bus:ttyD65
[ 3.484211] device: 'ttyD66': device_add
[ 3.485105] PM: Adding info for No Bus:ttyD66
[ 3.486211] device: 'ttyD67': device_add
[ 3.487095] PM: Adding info for No Bus:ttyD67
[ 3.489159] device: 'ttyD68': device_add
[ 3.490095] PM: Adding info for No Bus:ttyD68
[ 3.491212] device: 'ttyD69': device_add
[ 3.492111] PM: Adding info for No Bus:ttyD69
[ 3.493213] device: 'ttyD70': device_add
[ 3.494096] PM: Adding info for No Bus:ttyD70
[ 3.496240] device: 'ttyD71': device_add
[ 3.497049] PM: Adding info for No Bus:ttyD71
[ 3.498207] device: 'ttyD72': device_add
[ 3.499108] PM: Adding info for No Bus:ttyD72
[ 3.500212] device: 'ttyD73': device_add
[ 3.501095] PM: Adding info for No Bus:ttyD73
[ 3.503234] device: 'ttyD74': device_add
[ 3.504050] PM: Adding info for No Bus:ttyD74
[ 3.505209] device: 'ttyD75': device_add
[ 3.506105] PM: Adding info for No Bus:ttyD75
[ 3.507220] device: 'ttyD76': device_add
[ 3.508097] PM: Adding info for No Bus:ttyD76
[ 3.510154] device: 'ttyD77': device_add
[ 3.511096] PM: Adding info for No Bus:ttyD77
[ 3.512213] device: 'ttyD78': device_add
[ 3.513105] PM: Adding info for No Bus:ttyD78
[ 3.514212] device: 'ttyD79': device_add
[ 3.515096] PM: Adding info for No Bus:ttyD79
[ 3.517241] device: 'ttyD80': device_add
[ 3.518050] PM: Adding info for No Bus:ttyD80
[ 3.519207] device: 'ttyD81': device_add
[ 3.520107] PM: Adding info for No Bus:ttyD81
[ 3.521211] device: 'ttyD82': device_add
[ 3.522096] PM: Adding info for No Bus:ttyD82
[ 3.524227] device: 'ttyD83': device_add
[ 3.525060] PM: Adding info for No Bus:ttyD83
[ 3.526210] device: 'ttyD84': device_add
[ 3.527107] PM: Adding info for No Bus:ttyD84
[ 3.528210] device: 'ttyD85': device_add
[ 3.529096] PM: Adding info for No Bus:ttyD85
[ 3.531225] device: 'ttyD86': device_add
[ 3.532050] PM: Adding info for No Bus:ttyD86
[ 3.533209] device: 'ttyD87': device_add
[ 3.534106] PM: Adding info for No Bus:ttyD87
[ 3.535211] device: 'ttyD88': device_add
[ 3.536098] PM: Adding info for No Bus:ttyD88
[ 3.538227] device: 'ttyD89': device_add
[ 3.539050] PM: Adding info for No Bus:ttyD89
[ 3.540205] device: 'ttyD90': device_add
[ 3.541116] PM: Adding info for No Bus:ttyD90
[ 3.542262] device: 'ttyD91': device_add
[ 3.543100] PM: Adding info for No Bus:ttyD91
[ 3.545195] device: 'ttyD92': device_add
[ 3.546098] PM: Adding info for No Bus:ttyD92
[ 3.547215] device: 'ttyD93': device_add
[ 3.548106] PM: Adding info for No Bus:ttyD93
[ 3.549222] device: 'ttyD94': device_add
[ 3.550099] PM: Adding info for No Bus:ttyD94
[ 3.552246] device: 'ttyD95': device_add
[ 3.553051] PM: Adding info for No Bus:ttyD95
[ 3.554210] device: 'ttyD96': device_add
[ 3.555109] PM: Adding info for No Bus:ttyD96
[ 3.556212] device: 'ttyD97': device_add
[ 3.557098] PM: Adding info for No Bus:ttyD97
[ 3.559246] device: 'ttyD98': device_add
[ 3.563171] PM: Adding info for No Bus:ttyD98
[ 3.567819] device: 'ttyD99': device_add
[ 3.572028] PM: Adding info for No Bus:ttyD99
[ 3.576532] device: 'ttyD100': device_add
[ 3.580112] PM: Adding info for No Bus:ttyD100
[ 3.585393] device: 'ttyD101': device_add
[ 3.589182] PM: Adding info for No Bus:ttyD101
[ 3.594374] device: 'ttyD102': device_add
[ 3.598121] PM: Adding info for No Bus:ttyD102
[ 3.603238] device: 'ttyD103': device_add
[ 3.607174] PM: Adding info for No Bus:ttyD103
[ 3.612218] device: 'ttyD104': device_add
[ 3.616131] PM: Adding info for No Bus:ttyD104
[ 3.621147] device: 'ttyD105': device_add
[ 3.625173] PM: Adding info for No Bus:ttyD105
[ 3.630215] device: 'ttyD106': device_add
[ 3.634119] PM: Adding info for No Bus:ttyD106
[ 3.639071] device: 'ttyD107': device_add
[ 3.640094] PM: Adding info for No Bus:ttyD107
[ 3.641211] device: 'ttyD108': device_add
[ 3.643073] PM: Adding info for No Bus:ttyD108
[ 3.644209] device: 'ttyD109': device_add
[ 3.645104] PM: Adding info for No Bus:ttyD109
[ 3.646212] device: 'ttyD110': device_add
[ 3.647097] PM: Adding info for No Bus:ttyD110
[ 3.648211] device: 'ttyD111': device_add
[ 3.649110] PM: Adding info for No Bus:ttyD111
[ 3.650211] device: 'ttyD112': device_add
[ 3.651106] PM: Adding info for No Bus:ttyD112
[ 3.653217] device: 'ttyD113': device_add
[ 3.654054] PM: Adding info for No Bus:ttyD113
[ 3.656109] device: 'ttyD114': device_add
[ 3.657063] PM: Adding info for No Bus:ttyD114
[ 3.658208] device: 'ttyD115': device_add
[ 3.660019] PM: Adding info for No Bus:ttyD115
[ 3.661213] device: 'ttyD116': device_add
[ 3.662103] PM: Adding info for No Bus:ttyD116
[ 3.663212] device: 'ttyD117': device_add
[ 3.664113] PM: Adding info for No Bus:ttyD117
[ 3.665222] device: 'ttyD118': device_add
[ 3.666103] PM: Adding info for No Bus:ttyD118
[ 3.668172] device: 'ttyD119': device_add
[ 3.669102] PM: Adding info for No Bus:ttyD119
[ 3.671126] device: 'ttyD120': device_add
[ 3.672064] PM: Adding info for No Bus:ttyD120
[ 3.673209] device: 'ttyD121': device_add
[ 3.675027] PM: Adding info for No Bus:ttyD121
[ 3.676212] device: 'ttyD122': device_add
[ 3.677102] PM: Adding info for No Bus:ttyD122
[ 3.678211] device: 'ttyD123': device_add
[ 3.679113] PM: Adding info for No Bus:ttyD123
[ 3.680212] device: 'ttyD124': device_add
[ 3.681102] PM: Adding info for No Bus:ttyD124
[ 3.683165] device: 'ttyD125': device_add
[ 3.684114] PM: Adding info for No Bus:ttyD125
[ 3.686116] device: 'ttyD126': device_add
[ 3.687065] PM: Adding info for No Bus:ttyD126
[ 3.688209] device: 'ttyD127': device_add
[ 3.690024] PM: Adding info for No Bus:ttyD127
[ 3.691210] device: 'ttyD128': device_add
[ 3.692103] PM: Adding info for No Bus:ttyD128
[ 3.693256] device: 'ttyD129': device_add
[ 3.694119] PM: Adding info for No Bus:ttyD129
[ 3.695214] device: 'ttyD130': device_add
[ 3.696104] PM: Adding info for No Bus:ttyD130
[ 3.697214] device: 'ttyD131': device_add
[ 3.698104] PM: Adding info for No Bus:ttyD131
[ 3.700167] device: 'ttyD132': device_add
[ 3.701076] PM: Adding info for No Bus:ttyD132
[ 3.703073] device: 'ttyD133': device_add
[ 3.704088] PM: Adding info for No Bus:ttyD133
[ 3.705315] device: 'ttyD134': device_add
[ 3.706059] PM: Adding info for No Bus:ttyD134
[ 3.707210] device: 'ttyD135': device_add
[ 3.708118] PM: Adding info for No Bus:ttyD135
[ 3.709224] device: 'ttyD136': device_add
[ 3.710105] PM: Adding info for No Bus:ttyD136
[ 3.711213] device: 'ttyD137': device_add
[ 3.712106] PM: Adding info for No Bus:ttyD137
[ 3.713215] device: 'ttyD138': device_add
[ 3.714124] PM: Adding info for No Bus:ttyD138
[ 3.716199] device: 'ttyD139': device_add
[ 3.720176] PM: Adding info for No Bus:ttyD139
[ 3.725192] device: 'ttyD140': device_add
[ 3.729123] PM: Adding info for No Bus:ttyD140
[ 3.734161] device: 'ttyD141': device_add
[ 3.738070] PM: Adding info for No Bus:ttyD141
[ 3.742830] device: 'ttyD142': device_add
[ 3.747154] PM: Adding info for No Bus:ttyD142
[ 3.752068] device: 'ttyD143': device_add
[ 3.753127] PM: Adding info for No Bus:ttyD143
[ 3.754224] device: 'ttyD144': device_add
[ 3.756060] PM: Adding info for No Bus:ttyD144
[ 3.757214] device: 'ttyD145': device_add
[ 3.758118] PM: Adding info for No Bus:ttyD145
[ 3.759217] device: 'ttyD146': device_add
[ 3.760107] PM: Adding info for No Bus:ttyD146
[ 3.761215] device: 'ttyD147': device_add
[ 3.762108] PM: Adding info for No Bus:ttyD147
[ 3.763216] device: 'ttyD148': device_add
[ 3.764117] PM: Adding info for No Bus:ttyD148
[ 3.766239] device: 'ttyD149': device_add
[ 3.767064] PM: Adding info for No Bus:ttyD149
[ 3.769117] device: 'ttyD150': device_add
[ 3.770061] PM: Adding info for No Bus:ttyD150
[ 3.771212] device: 'ttyD151': device_add
[ 3.773042] PM: Adding info for No Bus:ttyD151
[ 3.774214] device: 'ttyD152': device_add
[ 3.775110] PM: Adding info for No Bus:ttyD152
[ 3.776216] device: 'ttyD153': device_add
[ 3.777107] PM: Adding info for No Bus:ttyD153
[ 3.778214] device: 'ttyD154': device_add
[ 3.779127] PM: Adding info for No Bus:ttyD154
[ 3.781215] device: 'ttyD155': device_add
[ 3.782108] PM: Adding info for No Bus:ttyD155
[ 3.784170] device: 'ttyD156': device_add
[ 3.785063] PM: Adding info for No Bus:ttyD156
[ 3.787069] device: 'ttyD157': device_add
[ 3.788071] PM: Adding info for No Bus:ttyD157
[ 3.789211] device: 'ttyD158': device_add
[ 3.790109] PM: Adding info for No Bus:ttyD158
[ 3.791217] device: 'ttyD159': device_add
[ 3.792108] PM: Adding info for No Bus:ttyD159
[ 3.793216] device: 'ttyD160': device_add
[ 3.794119] PM: Adding info for No Bus:ttyD160
[ 3.795216] device: 'ttyD161': device_add
[ 3.796108] PM: Adding info for No Bus:ttyD161
[ 3.798212] device: 'ttyD162': device_add
[ 3.799115] PM: Adding info for No Bus:ttyD162
[ 3.801175] device: 'ttyD163': device_add
[ 3.802073] PM: Adding info for No Bus:ttyD163
[ 3.804072] device: 'ttyD164': device_add
[ 3.805065] PM: Adding info for No Bus:ttyD164
[ 3.806216] device: 'ttyD165': device_add
[ 3.807111] PM: Adding info for No Bus:ttyD165
[ 3.808218] device: 'ttyD166': device_add
[ 3.809120] PM: Adding info for No Bus:ttyD166
[ 3.810217] device: 'ttyD167': device_add
[ 3.811124] PM: Adding info for No Bus:ttyD167
[ 3.812218] device: 'ttyD168': device_add
[ 3.813110] PM: Adding info for No Bus:ttyD168
[ 3.815202] device: 'ttyD169': device_add
[ 3.816181] PM: Adding info for No Bus:ttyD169
[ 3.818244] device: 'ttyD170': device_add
[ 3.819090] PM: Adding info for No Bus:ttyD170
[ 3.821137] device: 'ttyD171': device_add
[ 3.822070] PM: Adding info for No Bus:ttyD171
[ 3.823214] device: 'ttyD172': device_add
[ 3.825169] PM: Adding info for No Bus:ttyD172
[ 3.826220] device: 'ttyD173': device_add
[ 3.828019] PM: Adding info for No Bus:ttyD173
[ 3.829215] device: 'ttyD174': device_add
[ 3.830110] PM: Adding info for No Bus:ttyD174
[ 3.831229] device: 'ttyD175': device_add
[ 3.832124] PM: Adding info for No Bus:ttyD175
[ 3.833217] device: 'ttyD176': device_add
[ 3.834113] PM: Adding info for No Bus:ttyD176
[ 3.835221] device: 'ttyD177': device_add
[ 3.836113] PM: Adding info for No Bus:ttyD177
[ 3.838180] device: 'ttyD178': device_add
[ 3.839076] PM: Adding info for No Bus:ttyD178
[ 3.841106] device: 'ttyD179': device_add
[ 3.842065] PM: Adding info for No Bus:ttyD179
[ 3.843215] device: 'ttyD180': device_add
[ 3.845048] PM: Adding info for No Bus:ttyD180
[ 3.846219] device: 'ttyD181': device_add
[ 3.847124] PM: Adding info for No Bus:ttyD181
[ 3.848218] device: 'ttyD182': device_add
[ 3.849114] PM: Adding info for No Bus:ttyD182
[ 3.850218] device: 'ttyD183': device_add
[ 3.851111] PM: Adding info for No Bus:ttyD183
[ 3.852218] device: 'ttyD184': device_add
[ 3.853124] PM: Adding info for No Bus:ttyD184
[ 3.855242] device: 'ttyD185': device_add
[ 3.856067] PM: Adding info for No Bus:ttyD185
[ 3.858130] device: 'ttyD186': device_add
[ 3.859067] PM: Adding info for No Bus:ttyD186
[ 3.860212] device: 'ttyD187': device_add
[ 3.862078] PM: Adding info for No Bus:ttyD187
[ 3.863219] device: 'ttyD188': device_add
[ 3.864124] PM: Adding info for No Bus:ttyD188
[ 3.865217] device: 'ttyD189': device_add
[ 3.866116] PM: Adding info for No Bus:ttyD189
[ 3.867220] device: 'ttyD190': device_add
[ 3.868130] PM: Adding info for No Bus:ttyD190
[ 3.869257] device: 'ttyD191': device_add
[ 3.870120] PM: Adding info for No Bus:ttyD191
[ 3.872223] device: 'ttyD192': device_add
[ 3.873115] PM: Adding info for No Bus:ttyD192
[ 3.875239] device: 'ttyD193': device_add
[ 3.876080] PM: Adding info for No Bus:ttyD193
[ 3.878143] device: 'ttyD194': device_add
[ 3.879070] PM: Adding info for No Bus:ttyD194
[ 3.880212] device: 'ttyD195': device_add
[ 3.882178] PM: Adding info for No Bus:ttyD195
[ 3.883218] device: 'ttyD196': device_add
[ 3.885054] PM: Adding info for No Bus:ttyD196
[ 3.886218] device: 'ttyD197': device_add
[ 3.887120] PM: Adding info for No Bus:ttyD197
[ 3.888222] device: 'ttyD198': device_add
[ 3.889119] PM: Adding info for No Bus:ttyD198
[ 3.890218] device: 'ttyD199': device_add
[ 3.891131] PM: Adding info for No Bus:ttyD199
[ 3.892220] device: 'ttyD200': device_add
[ 3.893121] PM: Adding info for No Bus:ttyD200
[ 3.895242] device: 'ttyD201': device_add
[ 3.896073] PM: Adding info for No Bus:ttyD201
[ 3.898134] device: 'ttyD202': device_add
[ 3.899081] PM: Adding info for No Bus:ttyD202
[ 3.900216] device: 'ttyD203': device_add
[ 3.901122] PM: Adding info for No Bus:ttyD203
[ 3.902219] device: 'ttyD204': device_add
[ 3.903119] PM: Adding info for No Bus:ttyD204
[ 3.904220] device: 'ttyD205': device_add
[ 3.905139] PM: Adding info for No Bus:ttyD205
[ 3.906220] device: 'ttyD206': device_add
[ 3.907122] PM: Adding info for No Bus:ttyD206
[ 3.908220] device: 'ttyD207': device_add
[ 3.909121] PM: Adding info for No Bus:ttyD207
[ 3.911221] device: 'ttyD208': device_add
[ 3.912133] PM: Adding info for No Bus:ttyD208
[ 3.914242] device: 'ttyD209': device_add
[ 3.915076] PM: Adding info for No Bus:ttyD209
[ 3.917135] device: 'ttyD210': device_add
[ 3.918076] PM: Adding info for No Bus:ttyD210
[ 3.919222] device: 'ttyD211': device_add
[ 3.920139] PM: Adding info for No Bus:ttyD211
[ 3.921221] device: 'ttyD212': device_add
[ 3.923011] PM: Adding info for No Bus:ttyD212
[ 3.924218] device: 'ttyD213': device_add
[ 3.925124] PM: Adding info for No Bus:ttyD213
[ 3.926222] device: 'ttyD214': device_add
[ 3.927136] PM: Adding info for No Bus:ttyD214
[ 3.928218] device: 'ttyD215': device_add
[ 3.929124] PM: Adding info for No Bus:ttyD215
[ 3.930221] device: 'ttyD216': device_add
[ 3.931125] PM: Adding info for No Bus:ttyD216
[ 3.933240] device: 'ttyD217': device_add
[ 3.934089] PM: Adding info for No Bus:ttyD217
[ 3.936145] device: 'ttyD218': device_add
[ 3.937092] PM: Adding info for No Bus:ttyD218
[ 3.939064] device: 'ttyD219': device_add
[ 3.940080] PM: Adding info for No Bus:ttyD219
[ 3.941263] device: 'ttyD220': device_add
[ 3.943096] PM: Adding info for No Bus:ttyD220
[ 3.944220] device: 'ttyD221': device_add
[ 3.945129] PM: Adding info for No Bus:ttyD221
[ 3.946222] device: 'ttyD222': device_add
[ 3.947127] PM: Adding info for No Bus:ttyD222
[ 3.948221] device: 'ttyD223': device_add
[ 3.949138] PM: Adding info for No Bus:ttyD223
[ 3.950223] device: 'ttyD224': device_add
[ 3.951128] PM: Adding info for No Bus:ttyD224
[ 3.953201] device: 'ttyD225': device_add
[ 3.954130] PM: Adding info for No Bus:ttyD225
[ 3.956195] device: 'ttyD226': device_add
[ 3.957091] PM: Adding info for No Bus:ttyD226
[ 3.959120] device: 'ttyD227': device_add
[ 3.960082] PM: Adding info for No Bus:ttyD227
[ 3.961218] device: 'ttyD228': device_add
[ 3.963081] PM: Adding info for No Bus:ttyD228
[ 3.964230] device: 'ttyD229': device_add
[ 3.965143] PM: Adding info for No Bus:ttyD229
[ 3.966223] device: 'ttyD230': device_add
[ 3.967130] PM: Adding info for No Bus:ttyD230
[ 3.968222] device: 'ttyD231': device_add
[ 3.969141] PM: Adding info for No Bus:ttyD231
[ 3.970224] device: 'ttyD232': device_add
[ 3.971143] PM: Adding info for No Bus:ttyD232
[ 3.972220] device: 'ttyD233': device_add
[ 3.973133] PM: Adding info for No Bus:ttyD233
[ 3.975244] device: 'ttyD234': device_add
[ 3.976096] PM: Adding info for No Bus:ttyD234
[ 3.978148] device: 'ttyD235': device_add
[ 3.979098] PM: Adding info for No Bus:ttyD235
[ 3.981074] device: 'ttyD236': device_add
[ 3.982088] PM: Adding info for No Bus:ttyD236
[ 3.983219] device: 'ttyD237': device_add
[ 3.985059] PM: Adding info for No Bus:ttyD237
[ 3.986222] device: 'ttyD238': device_add
[ 3.987146] PM: Adding info for No Bus:ttyD238
[ 3.988222] device: 'ttyD239': device_add
[ 3.989135] PM: Adding info for No Bus:ttyD239
[ 3.990222] device: 'ttyD240': device_add
[ 3.991135] PM: Adding info for No Bus:ttyD240
[ 3.992221] device: 'ttyD241': device_add
[ 3.993147] PM: Adding info for No Bus:ttyD241
[ 3.995224] device: 'ttyD242': device_add
[ 3.996137] PM: Adding info for No Bus:ttyD242
[ 3.998240] device: 'ttyD243': device_add
[ 3.999090] PM: Adding info for No Bus:ttyD243
[ 4.001145] device: 'ttyD244': device_add
[ 4.002106] PM: Adding info for No Bus:ttyD244
[ 4.004125] device: 'ttyD245': device_add
[ 4.005092] PM: Adding info for No Bus:ttyD245
[ 4.006220] device: 'ttyD246': device_add
[ 4.008094] PM: Adding info for No Bus:ttyD246
[ 4.009229] device: 'ttyD247': device_add
[ 4.010153] PM: Adding info for No Bus:ttyD247
[ 4.011223] device: 'ttyD248': device_add
[ 4.012141] PM: Adding info for No Bus:ttyD248
[ 4.013267] device: 'ttyD249': device_add
[ 4.014152] PM: Adding info for No Bus:ttyD249
[ 4.015227] device: 'ttyD250': device_add
[ 4.016154] PM: Adding info for No Bus:ttyD250
[ 4.017223] device: 'ttyD251': device_add
[ 4.018144] PM: Adding info for No Bus:ttyD251
[ 4.019225] device: 'ttyD252': device_add
[ 4.020143] PM: Adding info for No Bus:ttyD252
[ 4.022242] device: 'ttyD253': device_add
[ 4.023109] PM: Adding info for No Bus:ttyD253
[ 4.025202] device: 'ttyD254': device_add
[ 4.026098] PM: Adding info for No Bus:ttyD254
[ 4.028160] device: 'ttyD255': device_add
[ 4.029098] PM: Adding info for No Bus:ttyD255
[ 4.031148] device: 'digi_ctl0': device_add
[ 4.032105] PM: Adding info for No Bus:digi_ctl0
[ 4.033266] device: 'digi_ctl1': device_add
[ 4.034160] PM: Adding info for No Bus:digi_ctl1
[ 4.035227] device: 'digi_ctl2': device_add
[ 4.036142] PM: Adding info for No Bus:digi_ctl2
[ 4.037224] device: 'digi_ctl3': device_add
[ 4.038161] PM: Adding info for No Bus:digi_ctl3
[ 4.040163] device: 'digi_ctl4': device_add
[ 4.041097] PM: Adding info for No Bus:digi_ctl4
[ 4.042221] device: 'digi_ctl5': device_add
[ 4.043143] PM: Adding info for No Bus:digi_ctl5
[ 4.044222] device: 'digi_ctl6': device_add
[ 4.045151] PM: Adding info for No Bus:digi_ctl6
[ 4.046226] device: 'digi_ctl7': device_add
[ 4.047147] PM: Adding info for No Bus:digi_ctl7
[ 4.049142] device: 'digi_ctl8': device_add
[ 4.050098] PM: Adding info for No Bus:digi_ctl8
[ 4.051222] device: 'digi_ctl9': device_add
[ 4.052154] PM: Adding info for No Bus:digi_ctl9
[ 4.053223] device: 'digi_ctl10': device_add
[ 4.054144] PM: Adding info for No Bus:digi_ctl10
[ 4.055226] device: 'digi_ctl11': device_add
[ 4.056143] PM: Adding info for No Bus:digi_ctl11
[ 4.057225] device: 'digi_ctl12': device_add
[ 4.058157] PM: Adding info for No Bus:digi_ctl12
[ 4.059225] device: 'digi_ctl13': device_add
[ 4.060162] PM: Adding info for No Bus:digi_ctl13
[ 4.062250] device: 'digi_ctl14': device_add
[ 4.063100] PM: Adding info for No Bus:digi_ctl14
[ 4.064221] device: 'digi_ctl15': device_add
[ 4.066091] PM: Adding info for No Bus:digi_ctl15
[ 4.068119] device: 'digi_ctl16': device_add
[ 4.069101] PM: Adding info for No Bus:digi_ctl16
[ 4.070222] device: 'digi_ctl17': device_add
[ 4.071146] PM: Adding info for No Bus:digi_ctl17
[ 4.072221] device: 'digi_ctl18': device_add
[ 4.073160] PM: Adding info for No Bus:digi_ctl18
[ 4.074229] device: 'digi_ctl19': device_add
[ 4.075149] PM: Adding info for No Bus:digi_ctl19
[ 4.076223] device: 'digi_ctl20': device_add
[ 4.078105] PM: Adding info for No Bus:digi_ctl20
[ 4.080181] device: 'digi_ctl21': device_add
[ 4.081114] PM: Adding info for No Bus:digi_ctl21
[ 4.082262] device: 'digi_ctl22': device_add
[ 4.084086] PM: Adding info for No Bus:digi_ctl22
[ 4.086122] device: 'digi_ctl23': device_add
[ 4.087115] PM: Adding info for No Bus:digi_ctl23
[ 4.088224] device: 'digi_ctl24': device_add
[ 4.089165] PM: Adding info for No Bus:digi_ctl24
[ 4.090227] device: 'digi_ctl25': device_add
[ 4.091154] PM: Adding info for No Bus:digi_ctl25
[ 4.092230] device: 'digi_ctl26': device_add
[ 4.093155] PM: Adding info for No Bus:digi_ctl26
[ 4.094238] device: 'digi_ctl27': device_add
[ 4.095191] PM: Adding info for No Bus:digi_ctl27
[ 4.097177] device: 'digi_ctl28': device_add
[ 4.098158] PM: Adding info for No Bus:digi_ctl28
[ 4.099231] device: 'digi_ctl29': device_add
[ 4.101089] PM: Adding info for No Bus:digi_ctl29
[ 4.103121] device: 'digi_ctl30': device_add
[ 4.104122] PM: Adding info for No Bus:digi_ctl30
[ 4.105224] device: 'digi_ctl31': device_add
[ 4.106157] PM: Adding info for No Bus:digi_ctl31
[ 4.107225] device: 'digi_ctl32': device_add
[ 4.108157] PM: Adding info for No Bus:digi_ctl32
[ 4.109231] device: 'digi_ctl33': device_add
[ 4.110171] PM: Adding info for No Bus:digi_ctl33
[ 4.111226] device: 'digi_ctl34': device_add
[ 4.112172] PM: Adding info for No Bus:digi_ctl34
[ 4.114257] device: 'digi_ctl35': device_add
[ 4.118202] PM: Adding info for No Bus:digi_ctl35
[ 4.123564] device: 'digi_ctl36': device_add
[ 4.128180] PM: Adding info for No Bus:digi_ctl36
[ 4.133155] device: 'digi_ctl37': device_add
[ 4.137186] PM: Adding info for No Bus:digi_ctl37
[ 4.142560] device: 'digi_ctl38': device_add
[ 4.147257] PM: Adding info for No Bus:digi_ctl38
[ 4.152169] device: 'digi_ctl39': device_add
[ 4.156188] PM: Adding info for No Bus:digi_ctl39
[ 4.161618] device: 'digi_ctl40': device_add
[ 4.162179] PM: Adding info for No Bus:digi_ctl40
[ 4.163229] device: 'digi_ctl41': device_add
[ 4.164186] PM: Adding info for No Bus:digi_ctl41
[ 4.165226] device: 'digi_ctl42': device_add
[ 4.166179] PM: Adding info for No Bus:digi_ctl42
[ 4.168189] device: 'digi_ctl43': device_add
[ 4.169174] PM: Adding info for No Bus:digi_ctl43
[ 4.170226] device: 'digi_ctl44': device_add
[ 4.172126] PM: Adding info for No Bus:digi_ctl44
[ 4.174178] device: 'digi_ctl45': device_add
[ 4.175118] PM: Adding info for No Bus:digi_ctl45
[ 4.176221] device: 'digi_ctl46': device_add
[ 4.178052] PM: Adding info for No Bus:digi_ctl46
[ 4.180112] device: 'digi_ctl47': device_add
[ 4.181138] PM: Adding info for No Bus:digi_ctl47
[ 4.182235] device: 'digi_ctl48': device_add
[ 4.183170] PM: Adding info for No Bus:digi_ctl48
[ 4.184227] device: 'digi_ctl49': device_add
[ 4.185169] PM: Adding info for No Bus:digi_ctl49
[ 4.186227] device: 'digi_ctl50': device_add
[ 4.187237] PM: Adding info for No Bus:digi_ctl50
[ 4.188229] device: 'digi_ctl51': device_add
[ 4.189196] PM: Adding info for No Bus:digi_ctl51
[ 4.190228] device: 'digi_ctl52': device_add
[ 4.191180] PM: Adding info for No Bus:digi_ctl52
[ 4.192229] device: 'digi_ctl53': device_add
[ 4.193196] PM: Adding info for No Bus:digi_ctl53
[ 4.195169] device: 'digi_ctl54': device_add
[ 4.196174] PM: Adding info for No Bus:digi_ctl54
[ 4.197226] device: 'digi_ctl55': device_add
[ 4.199111] PM: Adding info for No Bus:digi_ctl55
[ 4.201242] device: 'digi_ctl56': device_add
[ 4.202145] PM: Adding info for No Bus:digi_ctl56
[ 4.203225] device: 'digi_ctl57': device_add
[ 4.205141] PM: Adding info for No Bus:digi_ctl57
[ 4.207281] device: 'digi_ctl58': device_add
[ 4.208129] PM: Adding info for No Bus:digi_ctl58
[ 4.209225] device: 'digi_ctl59': device_add
[ 4.210191] PM: Adding info for No Bus:digi_ctl59
[ 4.212285] device: 'digi_ctl60': device_add
[ 4.213132] PM: Adding info for No Bus:digi_ctl60
[ 4.214226] device: 'digi_ctl61': device_add
[ 4.215180] PM: Adding info for No Bus:digi_ctl61
[ 4.217287] device: 'digi_ctl62': device_add
[ 4.218142] PM: Adding info for No Bus:digi_ctl62
[ 4.219226] device: 'digi_ctl63': device_add
[ 4.220182] PM: Adding info for No Bus:digi_ctl63
[ 4.222289] device: 'digi_ctl64': device_add
[ 4.223134] PM: Adding info for No Bus:digi_ctl64
[ 4.224224] device: 'digi_ctl65': device_add
[ 4.225196] PM: Adding info for No Bus:digi_ctl65
[ 4.227290] device: 'digi_ctl66': device_add
[ 4.228134] PM: Adding info for No Bus:digi_ctl66
[ 4.229223] device: 'digi_ctl67': device_add
[ 4.231229] PM: Adding info for No Bus:digi_ctl67
[ 4.233180] device: 'digi_ctl68': device_add
[ 4.234195] PM: Adding info for No Bus:digi_ctl68
[ 4.235229] device: 'digi_ctl69': device_add
[ 4.237137] PM: Adding info for No Bus:digi_ctl69
[ 4.239253] device: 'digi_ctl70': device_add
[ 4.240140] PM: Adding info for No Bus:digi_ctl70
[ 4.241224] device: 'digi_ctl71': device_add
[ 4.243149] PM: Adding info for No Bus:digi_ctl71
[ 4.245281] device: 'digi_ctl72': device_add
[ 4.246137] PM: Adding info for No Bus:digi_ctl72
[ 4.247223] device: 'digi_ctl73': device_add
[ 4.248189] PM: Adding info for No Bus:digi_ctl73
[ 4.250290] device: 'digi_ctl74': device_add
[ 4.251161] PM: Adding info for No Bus:digi_ctl74
[ 4.252223] device: 'digi_ctl75': device_add
[ 4.253198] PM: Adding info for No Bus:digi_ctl75
[ 4.255180] device: 'digi_ctl76': device_add
[ 4.256188] PM: Adding info for No Bus:digi_ctl76
[ 4.257228] device: 'digi_ctl77': device_add
[ 4.259156] PM: Adding info for No Bus:digi_ctl77
[ 4.261252] device: 'digi_ctl78': device_add
[ 4.262143] PM: Adding info for No Bus:digi_ctl78
[ 4.263224] device: 'digi_ctl79': device_add
[ 4.265146] PM: Adding info for No Bus:digi_ctl79
[ 4.267212] device: 'digi_ctl80': device_add
[ 4.271226] PM: Adding info for No Bus:digi_ctl80
[ 4.276548] device: 'digi_ctl81': device_add
[ 4.281166] PM: Adding info for No Bus:digi_ctl81
[ 4.286154] device: 'digi_ctl82': device_add
[ 4.290200] PM: Adding info for No Bus:digi_ctl82
[ 4.295604] device: 'digi_ctl83': device_add
[ 4.296175] PM: Adding info for No Bus:digi_ctl83
[ 4.298210] device: 'digi_ctl84': device_add
[ 4.299247] PM: Adding info for No Bus:digi_ctl84
[ 4.300228] device: 'digi_ctl85': device_add
[ 4.301196] PM: Adding info for No Bus:digi_ctl85
[ 4.303199] device: 'digi_ctl86': device_add
[ 4.304217] PM: Adding info for No Bus:digi_ctl86
[ 4.305227] device: 'digi_ctl87': device_add
[ 4.306200] PM: Adding info for No Bus:digi_ctl87
[ 4.308183] device: 'digi_ctl88': device_add
[ 4.309203] PM: Adding info for No Bus:digi_ctl88
[ 4.310231] device: 'digi_ctl89': device_add
[ 4.312166] PM: Adding info for No Bus:digi_ctl89
[ 4.314239] device: 'digi_ctl90': device_add
[ 4.315151] PM: Adding info for No Bus:digi_ctl90
[ 4.316225] device: 'digi_ctl91': device_add
[ 4.318155] PM: Adding info for No Bus:digi_ctl91
[ 4.320280] device: 'digi_ctl92': device_add
[ 4.321175] PM: Adding info for No Bus:digi_ctl92
[ 4.322224] device: 'digi_ctl93': device_add
[ 4.323218] PM: Adding info for No Bus:digi_ctl93
[ 4.325204] device: 'digi_ctl94': device_add
[ 4.326205] PM: Adding info for No Bus:digi_ctl94
[ 4.327230] device: 'digi_ctl95': device_add
[ 4.328223] PM: Adding info for No Bus:digi_ctl95
[ 4.330174] device: 'digi_ctl96': device_add
[ 4.331205] PM: Adding info for No Bus:digi_ctl96
[ 4.332228] device: 'digi_ctl97': device_add
[ 4.334162] PM: Adding info for No Bus:digi_ctl97
[ 4.336217] device: 'digi_ctl98': device_add
[ 4.340251] PM: Adding info for No Bus:digi_ctl98
[ 4.345575] device: 'digi_ctl99': device_add
[ 4.350227] PM: Adding info for No Bus:digi_ctl99
[ 4.355166] device: 'digi_ctl100': device_add
[ 4.359219] PM: Adding info for No Bus:digi_ctl100
[ 4.365054] device: 'digi_ctl101': device_add
[ 4.366192] PM: Adding info for No Bus:digi_ctl101
[ 4.367232] device: 'digi_ctl102': device_add
[ 4.368224] PM: Adding info for No Bus:digi_ctl102
[ 4.369227] device: 'digi_ctl103': device_add
[ 4.370204] PM: Adding info for No Bus:digi_ctl103
[ 4.371226] device: 'digi_ctl104': device_add
[ 4.372224] PM: Adding info for No Bus:digi_ctl104
[ 4.373228] device: 'digi_ctl105': device_add
[ 4.375219] PM: Adding info for No Bus:digi_ctl105
[ 4.376246] device: 'digi_ctl106': device_add
[ 4.377215] PM: Adding info for No Bus:digi_ctl106
[ 4.378228] device: 'digi_ctl107': device_add
[ 4.379229] PM: Adding info for No Bus:digi_ctl107
[ 4.380228] device: 'digi_ctl108': device_add
[ 4.382221] PM: Adding info for No Bus:digi_ctl108
[ 4.383229] device: 'digi_ctl109': device_add
[ 4.384218] PM: Adding info for No Bus:digi_ctl109
[ 4.385228] device: 'digi_ctl110': device_add
[ 4.386232] PM: Adding info for No Bus:digi_ctl110
[ 4.387227] device: 'digi_ctl111': device_add
[ 4.389177] PM: Adding info for No Bus:digi_ctl111
[ 4.391228] device: 'digi_ctl112': device_add
[ 4.392221] PM: Adding info for No Bus:digi_ctl112
[ 4.393228] device: 'digi_ctl113': device_add
[ 4.394235] PM: Adding info for No Bus:digi_ctl113
[ 4.395228] device: 'digi_ctl114': device_add
[ 4.397188] PM: Adding info for No Bus:digi_ctl114
[ 4.399227] device: 'digi_ctl115': device_add
[ 4.400226] PM: Adding info for No Bus:digi_ctl115
[ 4.401227] device: 'digi_ctl116': device_add
[ 4.402236] PM: Adding info for No Bus:digi_ctl116
[ 4.403229] device: 'digi_ctl117': device_add
[ 4.405180] PM: Adding info for No Bus:digi_ctl117
[ 4.407225] device: 'digi_ctl118': device_add
[ 4.408223] PM: Adding info for No Bus:digi_ctl118
[ 4.409228] device: 'digi_ctl119': device_add
[ 4.410238] PM: Adding info for No Bus:digi_ctl119
[ 4.411270] device: 'digi_ctl120': device_add
[ 4.412237] PM: Adding info for No Bus:digi_ctl120
[ 4.413231] device: 'digi_ctl121': device_add
[ 4.414229] PM: Adding info for No Bus:digi_ctl121
[ 4.415233] device: 'digi_ctl122': device_add
[ 4.416240] PM: Adding info for No Bus:digi_ctl122
[ 4.417231] device: 'digi_ctl123': device_add
[ 4.418239] PM: Adding info for No Bus:digi_ctl123
[ 4.419238] device: 'digi_ctl124': device_add
[ 4.420230] PM: Adding info for No Bus:digi_ctl124
[ 4.422075] device: 'digi_ctl125': device_add
[ 4.423194] PM: Adding info for No Bus:digi_ctl125
[ 4.424227] device: 'digi_ctl126': device_add
[ 4.425242] PM: Adding info for No Bus:digi_ctl126
[ 4.426232] device: 'digi_ctl127': device_add
[ 4.427232] PM: Adding info for No Bus:digi_ctl127
[ 4.429122] device: 'digi_ctl128': device_add
[ 4.430194] PM: Adding info for No Bus:digi_ctl128
[ 4.431227] device: 'digi_ctl129': device_add
[ 4.432233] PM: Adding info for No Bus:digi_ctl129
[ 4.433228] device: 'digi_ctl130': device_add
[ 4.435016] PM: Adding info for No Bus:digi_ctl130
[ 4.437157] device: 'digi_ctl131': device_add
[ 4.438199] PM: Adding info for No Bus:digi_ctl131
[ 4.439225] device: 'digi_ctl132': device_add
[ 4.440237] PM: Adding info for No Bus:digi_ctl132
[ 4.441227] device: 'digi_ctl133': device_add
[ 4.443121] PM: Adding info for No Bus:digi_ctl133
[ 4.445229] device: 'digi_ctl134': device_add
[ 4.446202] PM: Adding info for No Bus:digi_ctl134
[ 4.447223] device: 'digi_ctl135': device_add
[ 4.448237] PM: Adding info for No Bus:digi_ctl135
[ 4.449227] device: 'digi_ctl136': device_add
[ 4.451194] PM: Adding info for No Bus:digi_ctl136
[ 4.453228] device: 'digi_ctl137': device_add
[ 4.454252] PM: Adding info for No Bus:digi_ctl137
[ 4.455230] device: 'digi_ctl138': device_add
[ 4.456239] PM: Adding info for No Bus:digi_ctl138
[ 4.457229] device: 'digi_ctl139': device_add
[ 4.458245] PM: Adding info for No Bus:digi_ctl139
[ 4.459228] device: 'digi_ctl140': device_add
[ 4.460262] PM: Adding info for No Bus:digi_ctl140
[ 4.462075] device: 'digi_ctl141': device_add
[ 4.463206] PM: Adding info for No Bus:digi_ctl141
[ 4.464236] device: 'digi_ctl142': device_add
[ 4.465244] PM: Adding info for No Bus:digi_ctl142
[ 4.466230] device: 'digi_ctl143': device_add
[ 4.468055] PM: Adding info for No Bus:digi_ctl143
[ 4.470241] device: 'digi_ctl144': device_add
[ 4.471197] PM: Adding info for No Bus:digi_ctl144
[ 4.472225] device: 'digi_ctl145': device_add
[ 4.473247] PM: Adding info for No Bus:digi_ctl145
[ 4.474228] device: 'digi_ctl146': device_add
[ 4.476216] PM: Adding info for No Bus:digi_ctl146
[ 4.477229] device: 'digi_ctl147': device_add
[ 4.478249] PM: Adding info for No Bus:digi_ctl147
[ 4.480063] device: 'digi_ctl148': device_add
[ 4.481199] PM: Adding info for No Bus:digi_ctl148
[ 4.482269] device: 'digi_ctl149': device_add
[ 4.483266] PM: Adding info for No Bus:digi_ctl149
[ 4.484230] device: 'digi_ctl150': device_add
[ 4.486066] PM: Adding info for No Bus:digi_ctl150
[ 4.488198] device: 'digi_ctl151': device_add
[ 4.492293] PM: Adding info for No Bus:digi_ctl151
[ 4.498014] device: 'digi_ctl152': device_add
[ 4.499259] PM: Adding info for No Bus:digi_ctl152
[ 4.500228] device: 'digi_ctl153': device_add
[ 4.501274] PM: Adding info for No Bus:digi_ctl153
[ 4.502229] device: 'digi_ctl154': device_add
[ 4.504051] PM: Adding info for No Bus:digi_ctl154
[ 4.506130] device: 'digi_ctl155': device_add
[ 4.507252] PM: Adding info for No Bus:digi_ctl155
[ 4.508230] device: 'digi_ctl156': device_add
[ 4.509261] PM: Adding info for No Bus:digi_ctl156
[ 4.510232] device: 'digi_ctl157': device_add
[ 4.512215] PM: Adding info for No Bus:digi_ctl157
[ 4.513229] device: 'digi_ctl158': device_add
[ 4.514258] PM: Adding info for No Bus:digi_ctl158
[ 4.516065] device: 'digi_ctl159': device_add
[ 4.517231] PM: Adding info for No Bus:digi_ctl159
[ 4.518241] device: 'digi_ctl160': device_add
[ 4.519261] PM: Adding info for No Bus:digi_ctl160
[ 4.520232] device: 'digi_ctl161': device_add
[ 4.522078] PM: Adding info for No Bus:digi_ctl161
[ 4.524243] device: 'digi_ctl162': device_add
[ 4.525227] PM: Adding info for No Bus:digi_ctl162
[ 4.526226] device: 'digi_ctl163': device_add
[ 4.527262] PM: Adding info for No Bus:digi_ctl163
[ 4.528228] device: 'digi_ctl164': device_add
[ 4.529265] PM: Adding info for No Bus:digi_ctl164
[ 4.530229] device: 'digi_ctl165': device_add
[ 4.531277] PM: Adding info for No Bus:digi_ctl165
[ 4.533123] device: 'digi_ctl166': device_add
[ 4.534226] PM: Adding info for No Bus:digi_ctl166
[ 4.535225] device: 'digi_ctl167': device_add
[ 4.536264] PM: Adding info for No Bus:digi_ctl167
[ 4.537229] device: 'digi_ctl168': device_add
[ 4.539139] PM: Adding info for No Bus:digi_ctl168
[ 4.541178] device: 'digi_ctl169': device_add
[ 4.542266] PM: Adding info for No Bus:digi_ctl169
[ 4.543230] device: 'digi_ctl170': device_add
[ 4.544267] PM: Adding info for No Bus:digi_ctl170
[ 4.545230] device: 'digi_ctl171': device_add
[ 4.547285] PM: Adding info for No Bus:digi_ctl171
[ 4.548230] device: 'digi_ctl172': device_add
[ 4.549269] PM: Adding info for No Bus:digi_ctl172
[ 4.551122] device: 'digi_ctl173': device_add
[ 4.552232] PM: Adding info for No Bus:digi_ctl173
[ 4.553226] device: 'digi_ctl174': device_add
[ 4.554282] PM: Adding info for No Bus:digi_ctl174
[ 4.555227] device: 'digi_ctl175': device_add
[ 4.557136] PM: Adding info for No Bus:digi_ctl175
[ 4.559174] device: 'digi_ctl176': device_add
[ 4.560271] PM: Adding info for No Bus:digi_ctl176
[ 4.561229] device: 'digi_ctl177': device_add
[ 4.562282] PM: Adding info for No Bus:digi_ctl177
[ 4.563237] device: 'digi_ctl178': device_add
[ 4.564277] PM: Adding info for No Bus:digi_ctl178
[ 4.565271] device: 'digi_ctl179': device_add
[ 4.567056] PM: Adding info for No Bus:digi_ctl179
[ 4.569256] device: 'digi_ctl180': device_add
[ 4.573308] PM: Adding info for No Bus:digi_ctl180
[ 4.579114] device: 'digi_ctl181': device_add
[ 4.583225] PM: Adding info for No Bus:digi_ctl181
[ 4.588733] device: 'digi_ctl182': device_add
[ 4.589246] PM: Adding info for No Bus:digi_ctl182
[ 4.590230] device: 'digi_ctl183': device_add
[ 4.591280] PM: Adding info for No Bus:digi_ctl183
[ 4.592224] device: 'digi_ctl184': device_add
[ 4.593275] PM: Adding info for No Bus:digi_ctl184
[ 4.595123] device: 'digi_ctl185': device_add
[ 4.596240] PM: Adding info for No Bus:digi_ctl185
[ 4.597225] device: 'digi_ctl186': device_add
[ 4.598276] PM: Adding info for No Bus:digi_ctl186
[ 4.599229] device: 'digi_ctl187': device_add
[ 4.601210] PM: Adding info for No Bus:digi_ctl187
[ 4.602231] device: 'digi_ctl188': device_add
[ 4.603315] PM: Adding info for No Bus:digi_ctl188
[ 4.605117] device: 'digi_ctl189': device_add
[ 4.606242] PM: Adding info for No Bus:digi_ctl189
[ 4.607227] device: 'digi_ctl190': device_add
[ 4.608289] PM: Adding info for No Bus:digi_ctl190
[ 4.609230] device: 'digi_ctl191': device_add
[ 4.611189] PM: Adding info for No Bus:digi_ctl191
[ 4.613226] device: 'digi_ctl192': device_add
[ 4.614280] PM: Adding info for No Bus:digi_ctl192
[ 4.616056] device: 'digi_ctl193': device_add
[ 4.617230] PM: Adding info for No Bus:digi_ctl193
[ 4.618228] device: 'digi_ctl194': device_add
[ 4.619301] PM: Adding info for No Bus:digi_ctl194
[ 4.620231] device: 'digi_ctl195': device_add
[ 4.622131] PM: Adding info for No Bus:digi_ctl195
[ 4.624243] device: 'digi_ctl196': device_add
[ 4.625234] PM: Adding info for No Bus:digi_ctl196
[ 4.626225] device: 'digi_ctl197': device_add
[ 4.627295] PM: Adding info for No Bus:digi_ctl197
[ 4.628237] device: 'digi_ctl198': device_add
[ 4.629285] PM: Adding info for No Bus:digi_ctl198
[ 4.630232] device: 'digi_ctl199': device_add
[ 4.632079] PM: Adding info for No Bus:digi_ctl199
[ 4.634210] device: 'digi_ctl200': device_add
[ 4.638330] PM: Adding info for No Bus:digi_ctl200
[ 4.644055] device: 'digi_ctl201': device_add
[ 4.645304] PM: Adding info for No Bus:digi_ctl201
[ 4.646228] device: 'digi_ctl202': device_add
[ 4.647293] PM: Adding info for No Bus:digi_ctl202
[ 4.648232] device: 'digi_ctl203': device_add
[ 4.650199] PM: Adding info for No Bus:digi_ctl203
[ 4.652227] device: 'digi_ctl204': device_add
[ 4.653339] PM: Adding info for No Bus:digi_ctl204
[ 4.655114] device: 'digi_ctl205': device_add
[ 4.656280] PM: Adding info for No Bus:digi_ctl205
[ 4.657233] device: 'digi_ctl206': device_add
[ 4.658289] PM: Adding info for No Bus:digi_ctl206
[ 4.659232] device: 'digi_ctl207': device_add
[ 4.661253] PM: Adding info for No Bus:digi_ctl207
[ 4.662234] device: 'digi_ctl208': device_add
[ 4.663289] PM: Adding info for No Bus:digi_ctl208
[ 4.665126] device: 'digi_ctl209': device_add
[ 4.666241] PM: Adding info for No Bus:digi_ctl209
[ 4.667226] device: 'digi_ctl210': device_add
[ 4.668302] PM: Adding info for No Bus:digi_ctl210
[ 4.669273] device: 'digi_ctl211': device_add
[ 4.671255] PM: Adding info for No Bus:digi_ctl211
[ 4.672234] device: 'digi_ctl212': device_add
[ 4.673290] PM: Adding info for No Bus:digi_ctl212
[ 4.675121] device: 'digi_ctl213': device_add
[ 4.676256] PM: Adding info for No Bus:digi_ctl213
[ 4.677229] device: 'digi_ctl214': device_add
[ 4.678291] PM: Adding info for No Bus:digi_ctl214
[ 4.679232] device: 'digi_ctl215': device_add
[ 4.681214] PM: Adding info for No Bus:digi_ctl215
[ 4.682243] device: 'digi_ctl216': device_add
[ 4.683315] PM: Adding info for No Bus:digi_ctl216
[ 4.685126] device: 'digi_ctl217': device_add
[ 4.686247] PM: Adding info for No Bus:digi_ctl217
[ 4.687229] device: 'digi_ctl218': device_add
[ 4.688294] PM: Adding info for No Bus:digi_ctl218
[ 4.689232] device: 'digi_ctl219': device_add
[ 4.691228] PM: Adding info for No Bus:digi_ctl219
[ 4.692232] device: 'digi_ctl220': device_add
[ 4.693308] PM: Adding info for No Bus:digi_ctl220
[ 4.695121] device: 'digi_ctl221': device_add
[ 4.696249] PM: Adding info for No Bus:digi_ctl221
[ 4.697230] device: 'digi_ctl222': device_add
[ 4.698317] PM: Adding info for No Bus:digi_ctl222
[ 4.699231] device: 'digi_ctl223': device_add
[ 4.701243] PM: Adding info for No Bus:digi_ctl223
[ 4.702232] device: 'digi_ctl224': device_add
[ 4.703297] PM: Adding info for No Bus:digi_ctl224
[ 4.705164] device: 'digi_ctl225': device_add
[ 4.706263] PM: Adding info for No Bus:digi_ctl225
[ 4.707228] device: 'digi_ctl226': device_add
[ 4.708299] PM: Adding info for No Bus:digi_ctl226
[ 4.709231] device: 'digi_ctl227': device_add
[ 4.710306] PM: Adding info for No Bus:digi_ctl227
[ 4.711231] device: 'digi_ctl228': device_add
[ 4.713087] PM: Adding info for No Bus:digi_ctl228
[ 4.715217] device: 'digi_ctl229': device_add
[ 4.719330] PM: Adding info for No Bus:digi_ctl229
[ 4.725121] device: 'digi_ctl230': device_add
[ 4.729261] PM: Adding info for No Bus:digi_ctl230
[ 4.734743] device: 'digi_ctl231': device_add
[ 4.735267] PM: Adding info for No Bus:digi_ctl231
[ 4.736230] device: 'digi_ctl232': device_add
[ 4.737327] PM: Adding info for No Bus:digi_ctl232
[ 4.738227] device: 'digi_ctl233': device_add
[ 4.740133] PM: Adding info for No Bus:digi_ctl233
[ 4.742166] device: 'digi_ctl234': device_add
[ 4.743347] PM: Adding info for No Bus:digi_ctl234
[ 4.745057] device: 'digi_ctl235': device_add
[ 4.746258] PM: Adding info for No Bus:digi_ctl235
[ 4.747239] device: 'digi_ctl236': device_add
[ 4.748319] PM: Adding info for No Bus:digi_ctl236
[ 4.749232] device: 'digi_ctl237': device_add
[ 4.751199] PM: Adding info for No Bus:digi_ctl237
[ 4.753230] device: 'digi_ctl238': device_add
[ 4.754308] PM: Adding info for No Bus:digi_ctl238
[ 4.756105] device: 'digi_ctl239': device_add
[ 4.757281] PM: Adding info for No Bus:digi_ctl239
[ 4.758228] device: 'digi_ctl240': device_add
[ 4.759307] PM: Adding info for No Bus:digi_ctl240
[ 4.760232] device: 'digi_ctl241': device_add
[ 4.762251] PM: Adding info for No Bus:digi_ctl241
[ 4.763272] device: 'digi_ctl242': device_add
[ 4.765076] PM: Adding info for No Bus:digi_ctl242
[ 4.767244] device: 'digi_ctl243': device_add
[ 4.768264] PM: Adding info for No Bus:digi_ctl243
[ 4.769228] device: 'digi_ctl244': device_add
[ 4.770312] PM: Adding info for No Bus:digi_ctl244
[ 4.771232] device: 'digi_ctl245': device_add
[ 4.772327] PM: Adding info for No Bus:digi_ctl245
[ 4.773234] device: 'digi_ctl246': device_add
[ 4.775208] PM: Adding info for No Bus:digi_ctl246
[ 4.776234] device: 'digi_ctl247': device_add
[ 4.777315] PM: Adding info for No Bus:digi_ctl247
[ 4.779118] device: 'digi_ctl248': device_add
[ 4.780288] PM: Adding info for No Bus:digi_ctl248
[ 4.781231] device: 'digi_ctl249': device_add
[ 4.782315] PM: Adding info for No Bus:digi_ctl249
[ 4.783233] device: 'digi_ctl250': device_add
[ 4.785273] PM: Adding info for No Bus:digi_ctl250
[ 4.786232] device: 'digi_ctl251': device_add
[ 4.788070] PM: Adding info for No Bus:digi_ctl251
[ 4.790243] device: 'digi_ctl252': device_add
[ 4.791271] PM: Adding info for No Bus:digi_ctl252
[ 4.793062] device: 'digi_ctl253': device_add
[ 4.794268] PM: Adding info for No Bus:digi_ctl253
[ 4.795237] device: 'digi_ctl254': device_add
[ 4.796332] PM: Adding info for No Bus:digi_ctl254
[ 4.797233] device: 'digi_ctl255': device_add
[ 4.799238] PM: Adding info for No Bus:digi_ctl255
[ 4.800232] initcall epca_module_init+0x0/0xb returned 0 after 1516601 usecs
[ 4.801057] calling moxa_init+0x0/0x125 @ 1
[ 4.802007] MOXA Intellio family driver version 6.0k
[ 4.803051] device: 'ttyMX0': device_add
[ 4.804259] PM: Adding info for No Bus:ttyMX0
[ 4.805285] device: 'ttyMX1': device_add
[ 4.806313] PM: Adding info for No Bus:ttyMX1
[ 4.807233] device: 'ttyMX2': device_add
[ 4.808307] PM: Adding info for No Bus:ttyMX2
[ 4.809233] device: 'ttyMX3': device_add
[ 4.810308] PM: Adding info for No Bus:ttyMX3
[ 4.812213] device: 'ttyMX4': device_add
[ 4.813321] PM: Adding info for No Bus:ttyMX4
[ 4.815244] device: 'ttyMX5': device_add
[ 4.816262] PM: Adding info for No Bus:ttyMX5
[ 4.818155] device: 'ttyMX6': device_add
[ 4.819262] PM: Adding info for No Bus:ttyMX6
[ 4.821105] device: 'ttyMX7': device_add
[ 4.822274] PM: Adding info for No Bus:ttyMX7
[ 4.823229] device: 'ttyMX8': device_add
[ 4.825226] PM: Adding info for No Bus:ttyMX8
[ 4.826229] device: 'ttyMX9': device_add
[ 4.828125] PM: Adding info for No Bus:ttyMX9
[ 4.829231] device: 'ttyMX10': device_add
[ 4.831117] PM: Adding info for No Bus:ttyMX10
[ 4.832230] device: 'ttyMX11': device_add
[ 4.834190] PM: Adding info for No Bus:ttyMX11
[ 4.835232] device: 'ttyMX12': device_add
[ 4.837265] PM: Adding info for No Bus:ttyMX12
[ 4.839067] device: 'ttyMX13': device_add
[ 4.840354] PM: Adding info for No Bus:ttyMX13
[ 4.842246] device: 'ttyMX14': device_add
[ 4.843268] PM: Adding info for No Bus:ttyMX14
[ 4.844285] device: 'ttyMX15': device_add
[ 4.845322] PM: Adding info for No Bus:ttyMX15
[ 4.846234] device: 'ttyMX16': device_add
[ 4.847330] PM: Adding info for No Bus:ttyMX16
[ 4.848233] device: 'ttyMX17': device_add
[ 4.849317] PM: Adding info for No Bus:ttyMX17
[ 4.850234] device: 'ttyMX18': device_add
[ 4.851317] PM: Adding info for No Bus:ttyMX18
[ 4.852233] device: 'ttyMX19': device_add
[ 4.853331] PM: Adding info for No Bus:ttyMX19
[ 4.854233] device: 'ttyMX20': device_add
[ 4.856058] PM: Adding info for No Bus:ttyMX20
[ 4.857231] device: 'ttyMX21': device_add
[ 4.859158] PM: Adding info for No Bus:ttyMX21
[ 4.860232] device: 'ttyMX22': device_add
[ 4.862251] PM: Adding info for No Bus:ttyMX22
[ 4.863230] device: 'ttyMX23': device_add
[ 4.865326] PM: Adding info for No Bus:ttyMX23
[ 4.867123] device: 'ttyMX24': device_add
[ 4.868272] PM: Adding info for No Bus:ttyMX24
[ 4.870203] device: 'ttyMX25': device_add
[ 4.874384] PM: Adding info for No Bus:ttyMX25
[ 4.879175] device: 'ttyMX26': device_add
[ 4.883335] PM: Adding info for No Bus:ttyMX26
[ 4.888355] device: 'ttyMX27': device_add
[ 4.892323] PM: Adding info for No Bus:ttyMX27
[ 4.897432] device: 'ttyMX28': device_add
[ 4.902033] PM: Adding info for No Bus:ttyMX28
[ 4.906635] device: 'ttyMX29': device_add
[ 4.908188] PM: Adding info for No Bus:ttyMX29
[ 4.909233] device: 'ttyMX30': device_add
[ 4.911281] PM: Adding info for No Bus:ttyMX30
[ 4.913125] device: 'ttyMX31': device_add
[ 4.914275] PM: Adding info for No Bus:ttyMX31
[ 4.916230] device: 'ttyMX32': device_add
[ 4.917290] PM: Adding info for No Bus:ttyMX32
[ 4.918227] device: 'ttyMX33': device_add
[ 4.919326] PM: Adding info for No Bus:ttyMX33
[ 4.920236] device: 'ttyMX34': device_add
[ 4.921325] PM: Adding info for No Bus:ttyMX34
[ 4.922233] device: 'ttyMX35': device_add
[ 4.923339] PM: Adding info for No Bus:ttyMX35
[ 4.924240] device: 'ttyMX36': device_add
[ 4.925328] PM: Adding info for No Bus:ttyMX36
[ 4.926234] device: 'ttyMX37': device_add
[ 4.927330] PM: Adding info for No Bus:ttyMX37
[ 4.928232] device: 'ttyMX38': device_add
[ 4.930077] PM: Adding info for No Bus:ttyMX38
[ 4.931232] device: 'ttyMX39': device_add
[ 4.933166] PM: Adding info for No Bus:ttyMX39
[ 4.934230] device: 'ttyMX40': device_add
[ 4.936258] PM: Adding info for No Bus:ttyMX40
[ 4.938062] device: 'ttyMX41': device_add
[ 4.939294] PM: Adding info for No Bus:ttyMX41
[ 4.941174] device: 'ttyMX42': device_add
[ 4.942282] PM: Adding info for No Bus:ttyMX42
[ 4.944204] device: 'ttyMX43': device_add
[ 4.945377] PM: Adding info for No Bus:ttyMX43
[ 4.946230] device: 'ttyMX44': device_add
[ 4.947346] PM: Adding info for No Bus:ttyMX44
[ 4.948232] device: 'ttyMX45': device_add
[ 4.949333] PM: Adding info for No Bus:ttyMX45
[ 4.950231] device: 'ttyMX46': device_add
[ 4.951334] PM: Adding info for No Bus:ttyMX46
[ 4.952232] device: 'ttyMX47': device_add
[ 4.953356] PM: Adding info for No Bus:ttyMX47
[ 4.954276] device: 'ttyMX48': device_add
[ 4.956136] PM: Adding info for No Bus:ttyMX48
[ 4.957233] device: 'ttyMX49': device_add
[ 4.959233] PM: Adding info for No Bus:ttyMX49
[ 4.960237] device: 'ttyMX50': device_add
[ 4.962305] PM: Adding info for No Bus:ttyMX50
[ 4.964131] device: 'ttyMX51': device_add
[ 4.965289] PM: Adding info for No Bus:ttyMX51
[ 4.967223] device: 'ttyMX52': device_add
[ 4.968289] PM: Adding info for No Bus:ttyMX52
[ 4.969229] device: 'ttyMX53': device_add
[ 4.970351] PM: Adding info for No Bus:ttyMX53
[ 4.971242] device: 'ttyMX54': device_add
[ 4.972338] PM: Adding info for No Bus:ttyMX54
[ 4.973234] device: 'ttyMX55': device_add
[ 4.974338] PM: Adding info for No Bus:ttyMX55
[ 4.975233] device: 'ttyMX56': device_add
[ 4.976352] PM: Adding info for No Bus:ttyMX56
[ 4.977233] device: 'ttyMX57': device_add
[ 4.979047] PM: Adding info for No Bus:ttyMX57
[ 4.980231] device: 'ttyMX58': device_add
[ 4.982153] PM: Adding info for No Bus:ttyMX58
[ 4.983232] device: 'ttyMX59': device_add
[ 4.985267] PM: Adding info for No Bus:ttyMX59
[ 4.987065] device: 'ttyMX60': device_add
[ 4.988292] PM: Adding info for No Bus:ttyMX60
[ 4.990175] device: 'ttyMX61': device_add
[ 4.991292] PM: Adding info for No Bus:ttyMX61
[ 4.993209] device: 'ttyMX62': device_add
[ 4.994399] PM: Adding info for No Bus:ttyMX62
[ 4.995232] device: 'ttyMX63': device_add
[ 4.996353] PM: Adding info for No Bus:ttyMX63
[ 4.997232] device: 'ttyMX64': device_add
[ 4.998343] PM: Adding info for No Bus:ttyMX64
[ 4.999233] device: 'ttyMX65': device_add
[ 5.000362] PM: Adding info for No Bus:ttyMX65
[ 5.001234] device: 'ttyMX66': device_add
[ 5.003100] PM: Adding info for No Bus:ttyMX66
[ 5.004231] device: 'ttyMX67': device_add
[ 5.006213] PM: Adding info for No Bus:ttyMX67
[ 5.007231] device: 'ttyMX68': device_add
[ 5.009362] PM: Adding info for No Bus:ttyMX68
[ 5.011181] device: 'ttyMX69': device_add
[ 5.012323] PM: Adding info for No Bus:ttyMX69
[ 5.013229] device: 'ttyMX70': device_add
[ 5.014361] PM: Adding info for No Bus:ttyMX70
[ 5.015230] device: 'ttyMX71': device_add
[ 5.016359] PM: Adding info for No Bus:ttyMX71
[ 5.017241] device: 'ttyMX72': device_add
[ 5.018347] PM: Adding info for No Bus:ttyMX72
[ 5.019232] device: 'ttyMX73': device_add
[ 5.020346] PM: Adding info for No Bus:ttyMX73
[ 5.021233] device: 'ttyMX74': device_add
[ 5.023096] PM: Adding info for No Bus:ttyMX74
[ 5.024229] device: 'ttyMX75': device_add
[ 5.026200] PM: Adding info for No Bus:ttyMX75
[ 5.027229] device: 'ttyMX76': device_add
[ 5.029316] PM: Adding info for No Bus:ttyMX76
[ 5.031160] device: 'ttyMX77': device_add
[ 5.032319] PM: Adding info for No Bus:ttyMX77
[ 5.033229] device: 'ttyMX78': device_add
[ 5.034351] PM: Adding info for No Bus:ttyMX78
[ 5.035232] device: 'ttyMX79': device_add
[ 5.036350] PM: Adding info for No Bus:ttyMX79
[ 5.037234] device: 'ttyMX80': device_add
[ 5.038364] PM: Adding info for No Bus:ttyMX80
[ 5.039233] device: 'ttyMX81': device_add
[ 5.040358] PM: Adding info for No Bus:ttyMX81
[ 5.041234] device: 'ttyMX82': device_add
[ 5.043083] PM: Adding info for No Bus:ttyMX82
[ 5.044232] device: 'ttyMX83': device_add
[ 5.046216] PM: Adding info for No Bus:ttyMX83
[ 5.047232] device: 'ttyMX84': device_add
[ 5.049309] PM: Adding info for No Bus:ttyMX84
[ 5.051122] device: 'ttyMX85': device_add
[ 5.052304] PM: Adding info for No Bus:ttyMX85
[ 5.054229] device: 'ttyMX86': device_add
[ 5.055320] PM: Adding info for No Bus:ttyMX86
[ 5.056227] device: 'ttyMX87': device_add
[ 5.057354] PM: Adding info for No Bus:ttyMX87
[ 5.058234] device: 'ttyMX88': device_add
[ 5.059355] PM: Adding info for No Bus:ttyMX88
[ 5.060232] device: 'ttyMX89': device_add
[ 5.061379] PM: Adding info for No Bus:ttyMX89
[ 5.062242] device: 'ttyMX90': device_add
[ 5.064076] PM: Adding info for No Bus:ttyMX90
[ 5.065232] device: 'ttyMX91': device_add
[ 5.067193] PM: Adding info for No Bus:ttyMX91
[ 5.068231] device: 'ttyMX92': device_add
[ 5.070326] PM: Adding info for No Bus:ttyMX92
[ 5.072128] device: 'ttyMX93': device_add
[ 5.073322] PM: Adding info for No Bus:ttyMX93
[ 5.075218] device: 'ttyMX94': device_add
[ 5.076314] PM: Adding info for No Bus:ttyMX94
[ 5.077228] device: 'ttyMX95': device_add
[ 5.078375] PM: Adding info for No Bus:ttyMX95
[ 5.079230] device: 'ttyMX96': device_add
[ 5.080367] PM: Adding info for No Bus:ttyMX96
[ 5.081233] device: 'ttyMX97': device_add
[ 5.082361] PM: Adding info for No Bus:ttyMX97
[ 5.083231] device: 'ttyMX98': device_add
[ 5.085088] PM: Adding info for No Bus:ttyMX98
[ 5.086231] device: 'ttyMX99': device_add
[ 5.088214] PM: Adding info for No Bus:ttyMX99
[ 5.089229] device: 'ttyMX100': device_add
[ 5.090376] PM: Adding info for No Bus:ttyMX100
[ 5.092195] device: 'ttyMX101': device_add
[ 5.093377] PM: Adding info for No Bus:ttyMX101
[ 5.094231] device: 'ttyMX102': device_add
[ 5.096034] PM: Adding info for No Bus:ttyMX102
[ 5.097230] device: 'ttyMX103': device_add
[ 5.099321] PM: Adding info for No Bus:ttyMX103
[ 5.101242] device: 'ttyMX104': device_add
[ 5.102341] PM: Adding info for No Bus:ttyMX104
[ 5.103227] device: 'ttyMX105': device_add
[ 5.105029] PM: Adding info for No Bus:ttyMX105
[ 5.106276] device: 'ttyMX106': device_add
[ 5.108377] PM: Adding info for No Bus:ttyMX106
[ 5.110227] device: 'ttyMX107': device_add
[ 5.111334] PM: Adding info for No Bus:ttyMX107
[ 5.112236] device: 'ttyMX108': device_add
[ 5.114029] PM: Adding info for No Bus:ttyMX108
[ 5.115232] device: 'ttyMX109': device_add
[ 5.117325] PM: Adding info for No Bus:ttyMX109
[ 5.119236] device: 'ttyMX110': device_add
[ 5.120341] PM: Adding info for No Bus:ttyMX110
[ 5.121229] device: 'ttyMX111': device_add
[ 5.123030] PM: Adding info for No Bus:ttyMX111
[ 5.124231] device: 'ttyMX112': device_add
[ 5.126327] PM: Adding info for No Bus:ttyMX112
[ 5.128233] device: 'ttyMX113': device_add
[ 5.129336] PM: Adding info for No Bus:ttyMX113
[ 5.130228] device: 'ttyMX114': device_add
[ 5.132046] PM: Adding info for No Bus:ttyMX114
[ 5.133230] device: 'ttyMX115': device_add
[ 5.135327] PM: Adding info for No Bus:ttyMX115
[ 5.137237] device: 'ttyMX116': device_add
[ 5.138338] PM: Adding info for No Bus:ttyMX116
[ 5.139228] device: 'ttyMX117': device_add
[ 5.141028] PM: Adding info for No Bus:ttyMX117
[ 5.142230] device: 'ttyMX118': device_add
[ 5.144329] PM: Adding info for No Bus:ttyMX118
[ 5.146236] device: 'ttyMX119': device_add
[ 5.147340] PM: Adding info for No Bus:ttyMX119
[ 5.148227] device: 'ttyMX120': device_add
[ 5.150026] PM: Adding info for No Bus:ttyMX120
[ 5.151229] device: 'ttyMX121': device_add
[ 5.153330] PM: Adding info for No Bus:ttyMX121
[ 5.155236] device: 'ttyMX122': device_add
[ 5.156341] PM: Adding info for No Bus:ttyMX122
[ 5.157228] device: 'ttyMX123': device_add
[ 5.159028] PM: Adding info for No Bus:ttyMX123
[ 5.160235] device: 'ttyMX124': device_add
[ 5.162332] PM: Adding info for No Bus:ttyMX124
[ 5.164236] device: 'ttyMX125': device_add
[ 5.165342] PM: Adding info for No Bus:ttyMX125
[ 5.166236] device: 'ttyMX126': device_add
[ 5.168056] PM: Adding info for No Bus:ttyMX126
[ 5.169229] device: 'ttyMX127': device_add
[ 5.171335] PM: Adding info for No Bus:ttyMX127
[ 5.173237] device: 'ttyMX128': device_add
[ 5.174363] PM: Adding info for No Bus:ttyMX128
[ 5.175227] bus: 'pci': add driver moxa
[ 5.176374] initcall moxa_init+0x0/0x125 returned 0 after 365234 usecs
[ 5.177011] calling riscom8_init_module+0x0/0x76 @ 1
[ 5.178006] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[ 5.179034] device: 'ttyL0': device_add
[ 5.180380] PM: Adding info for No Bus:ttyL0
[ 5.182276] device: 'ttyL1': device_add
[ 5.183345] PM: Adding info for No Bus:ttyL1
[ 5.185121] device: 'ttyL2': device_add
[ 5.187294] PM: Adding info for No Bus:ttyL2
[ 5.188229] device: 'ttyL3': device_add
[ 5.190115] PM: Adding info for No Bus:ttyL3
[ 5.191231] device: 'ttyL4': device_add
[ 5.192387] PM: Adding info for No Bus:ttyL4
[ 5.193232] device: 'ttyL5': device_add
[ 5.194373] PM: Adding info for No Bus:ttyL5
[ 5.196231] device: 'ttyL6': device_add
[ 5.197379] PM: Adding info for No Bus:ttyL6
[ 5.199135] device: 'ttyL7': device_add
[ 5.201334] PM: Adding info for No Bus:ttyL7
[ 5.202229] device: 'ttyL8': device_add
[ 5.204169] PM: Adding info for No Bus:ttyL8
[ 5.205232] device: 'ttyL9': device_add
[ 5.206375] PM: Adding info for No Bus:ttyL9
[ 5.207234] device: 'ttyL10': device_add
[ 5.208388] PM: Adding info for No Bus:ttyL10
[ 5.209233] device: 'ttyL11': device_add
[ 5.210375] PM: Adding info for No Bus:ttyL11
[ 5.211234] device: 'ttyL12': device_add
[ 5.212391] PM: Adding info for No Bus:ttyL12
[ 5.213234] device: 'ttyL13': device_add
[ 5.214391] PM: Adding info for No Bus:ttyL13
[ 5.215233] device: 'ttyL14': device_add
[ 5.216377] PM: Adding info for No Bus:ttyL14
[ 5.218243] device: 'ttyL15': device_add
[ 5.219377] PM: Adding info for No Bus:ttyL15
[ 5.221198] device: 'ttyL16': device_add
[ 5.222392] PM: Adding info for No Bus:ttyL16
[ 5.224173] device: 'ttyL17': device_add
[ 5.225378] PM: Adding info for No Bus:ttyL17
[ 5.227245] device: 'ttyL18': device_add
[ 5.228330] PM: Adding info for No Bus:ttyL18
[ 5.230196] device: 'ttyL19': device_add
[ 5.231344] PM: Adding info for No Bus:ttyL19
[ 5.233240] device: 'ttyL20': device_add
[ 5.234332] PM: Adding info for No Bus:ttyL20
[ 5.236237] device: 'ttyL21': device_add
[ 5.237332] PM: Adding info for No Bus:ttyL21
[ 5.239237] device: 'ttyL22': device_add
[ 5.240353] PM: Adding info for No Bus:ttyL22
[ 5.242179] device: 'ttyL23': device_add
[ 5.243424] PM: Adding info for No Bus:ttyL23
[ 5.245190] device: 'ttyL24': device_add
[ 5.246381] PM: Adding info for No Bus:ttyL24
[ 5.248234] device: 'ttyL25': device_add
[ 5.249356] PM: Adding info for No Bus:ttyL25
[ 5.251179] device: 'ttyL26': device_add
[ 5.252426] PM: Adding info for No Bus:ttyL26
[ 5.254182] device: 'ttyL27': device_add
[ 5.255381] PM: Adding info for No Bus:ttyL27
[ 5.257233] device: 'ttyL28': device_add
[ 5.258348] PM: Adding info for No Bus:ttyL28
[ 5.260163] device: 'ttyL29': device_add
[ 5.261426] PM: Adding info for No Bus:ttyL29
[ 5.263175] device: 'ttyL30': device_add
[ 5.264382] PM: Adding info for No Bus:ttyL30
[ 5.266238] device: 'ttyL31': device_add
[ 5.267349] PM: Adding info for No Bus:ttyL31
[ 5.269176] rc0: RISCom/8 Board at 0x220 not found.
[ 5.270148] rc1: RISCom/8 Board at 0x240 not found.
[ 5.271054] rc2: RISCom/8 Board at 0x250 not found.
[ 5.272053] rc3: RISCom/8 Board at 0x260 not found.
[ 5.273580] device: 'ttyL0': device_unregister
[ 5.274058] PM: Removing info for No Bus:ttyL0
[ 5.276213] device: 'ttyL0': device_create_release
[ 5.277556] device: 'ttyL1': device_unregister
[ 5.278007] PM: Removing info for No Bus:ttyL1
[ 5.280165] device: 'ttyL1': device_create_release
[ 5.282528] device: 'ttyL2': device_unregister
[ 5.283007] PM: Removing info for No Bus:ttyL2
[ 5.284457] device: 'ttyL2': device_create_release
[ 5.286387] device: 'ttyL3': device_unregister
[ 5.287008] PM: Removing info for No Bus:ttyL3
[ 5.288409] device: 'ttyL3': device_create_release
[ 5.290214] device: 'ttyL4': device_unregister
[ 5.291007] PM: Removing info for No Bus:ttyL4
[ 5.292408] device: 'ttyL4': device_create_release
[ 5.294035] device: 'ttyL5': device_unregister
[ 5.295007] PM: Removing info for No Bus:ttyL5
[ 5.297359] device: 'ttyL5': device_create_release
[ 5.298642] device: 'ttyL6': device_unregister
[ 5.299009] PM: Removing info for No Bus:ttyL6
[ 5.301207] device: 'ttyL6': device_create_release
[ 5.302641] device: 'ttyL7': device_unregister
[ 5.303008] PM: Removing info for No Bus:ttyL7
[ 5.305172] device: 'ttyL7': device_create_release
[ 5.306550] device: 'ttyL8': device_unregister
[ 5.307007] PM: Removing info for No Bus:ttyL8
[ 5.309131] device: 'ttyL8': device_create_release
[ 5.311487] device: 'ttyL9': device_unregister
[ 5.312007] PM: Removing info for No Bus:ttyL9
[ 5.313461] device: 'ttyL9': device_create_release
[ 5.315354] device: 'ttyL10': device_unregister
[ 5.316008] PM: Removing info for No Bus:ttyL10
[ 5.317413] device: 'ttyL10': device_create_release
[ 5.319457] device: 'ttyL11': device_unregister
[ 5.321011] PM: Removing info for No Bus:ttyL11
[ 5.323157] device: 'ttyL11': device_create_release
[ 5.324552] device: 'ttyL12': device_unregister
[ 5.325007] PM: Removing info for No Bus:ttyL12
[ 5.327242] device: 'ttyL12': device_create_release
[ 5.328552] device: 'ttyL13': device_unregister
[ 5.329007] PM: Removing info for No Bus:ttyL13
[ 5.331316] device: 'ttyL13': device_create_release
[ 5.332594] device: 'ttyL14': device_unregister
[ 5.333008] PM: Removing info for No Bus:ttyL14
[ 5.335390] device: 'ttyL14': device_create_release
[ 5.337019] device: 'ttyL15': device_unregister
[ 5.338007] PM: Removing info for No Bus:ttyL15
[ 5.339408] device: 'ttyL15': device_create_release
[ 5.341101] device: 'ttyL16': device_unregister
[ 5.342007] PM: Removing info for No Bus:ttyL16
[ 5.343408] device: 'ttyL16': device_create_release
[ 5.345189] device: 'ttyL17': device_unregister
[ 5.346007] PM: Removing info for No Bus:ttyL17
[ 5.347411] device: 'ttyL17': device_create_release
[ 5.349272] device: 'ttyL18': device_unregister
[ 5.350007] PM: Removing info for No Bus:ttyL18
[ 5.351411] device: 'ttyL18': device_create_release
[ 5.353367] device: 'ttyL19': device_unregister
[ 5.354008] PM: Removing info for No Bus:ttyL19
[ 5.355412] device: 'ttyL19': device_create_release
[ 5.357472] device: 'ttyL20': device_unregister
[ 5.358008] PM: Removing info for No Bus:ttyL20
[ 5.360116] device: 'ttyL20': device_create_release
[ 5.362558] device: 'ttyL21': device_unregister
[ 5.363007] PM: Removing info for No Bus:ttyL21
[ 5.365240] device: 'ttyL21': device_create_release
[ 5.366552] device: 'ttyL22': device_unregister
[ 5.367007] PM: Removing info for No Bus:ttyL22
[ 5.369327] device: 'ttyL22': device_create_release
[ 5.370595] device: 'ttyL23': device_unregister
[ 5.371009] PM: Removing info for No Bus:ttyL23
[ 5.373408] device: 'ttyL23': device_create_release
[ 5.375038] device: 'ttyL24': device_unregister
[ 5.376007] PM: Removing info for No Bus:ttyL24
[ 5.377415] device: 'ttyL24': device_create_release
[ 5.379127] device: 'ttyL25': device_unregister
[ 5.380007] PM: Removing info for No Bus:ttyL25
[ 5.381410] device: 'ttyL25': device_create_release
[ 5.383236] device: 'ttyL26': device_unregister
[ 5.384007] PM: Removing info for No Bus:ttyL26
[ 5.385412] device: 'ttyL26': device_create_release
[ 5.387321] device: 'ttyL27': device_unregister
[ 5.388007] PM: Removing info for No Bus:ttyL27
[ 5.389412] device: 'ttyL27': device_create_release
[ 5.391404] device: 'ttyL28': device_unregister
[ 5.392008] PM: Removing info for No Bus:ttyL28
[ 5.393411] device: 'ttyL28': device_create_release
[ 5.395496] device: 'ttyL29': device_unregister
[ 5.396008] PM: Removing info for No Bus:ttyL29
[ 5.398152] device: 'ttyL29': device_create_release
[ 5.399553] device: 'ttyL30': device_unregister
[ 5.400007] PM: Removing info for No Bus:ttyL30
[ 5.402208] device: 'ttyL30': device_create_release
[ 5.403564] device: 'ttyL31': device_unregister
[ 5.404008] PM: Removing info for No Bus:ttyL31
[ 5.406304] device: 'ttyL31': device_create_release
[ 5.407076] rc: No RISCom/8 boards detected.
[ 5.408013] initcall riscom8_init_module+0x0/0x76 returned -5 after 224609 usecs
[ 5.409008] initcall riscom8_init_module+0x0/0x76 returned with error code -5
[ 5.410008] calling isicom_init+0x0/0x1db @ 1
[ 5.411162] bus: 'pci': add driver isicom
[ 5.413173] initcall isicom_init+0x0/0x1db returned 0 after 1953 usecs
[ 5.414111] calling synclink_init+0x0/0x140 @ 1
[ 5.415008] SyncLink serial driver $Revision: 4.38 $
[ 5.416009] bus: 'pci': add driver synclink
[ 5.417255] device: 'ttySL0': device_add
[ 5.419362] PM: Adding info for No Bus:ttySL0
[ 5.421066] device: 'ttySL1': device_add
[ 5.423327] PM: Adding info for No Bus:ttySL1
[ 5.424234] device: 'ttySL2': device_add
[ 5.426338] PM: Adding info for No Bus:ttySL2
[ 5.427227] device: 'ttySL3': device_add
[ 5.429298] PM: Adding info for No Bus:ttySL3
[ 5.430228] device: 'ttySL4': device_add
[ 5.432252] PM: Adding info for No Bus:ttySL4
[ 5.433227] device: 'ttySL5': device_add
[ 5.435223] PM: Adding info for No Bus:ttySL5
[ 5.436229] device: 'ttySL6': device_add
[ 5.438187] PM: Adding info for No Bus:ttySL6
[ 5.439232] device: 'ttySL7': device_add
[ 5.441152] PM: Adding info for No Bus:ttySL7
[ 5.442235] device: 'ttySL8': device_add
[ 5.444131] PM: Adding info for No Bus:ttySL8
[ 5.445226] device: 'ttySL9': device_add
[ 5.447087] PM: Adding info for No Bus:ttySL9
[ 5.448229] device: 'ttySL10': device_add
[ 5.450135] PM: Adding info for No Bus:ttySL10
[ 5.451229] device: 'ttySL11': device_add
[ 5.453276] PM: Adding info for No Bus:ttySL11
[ 5.455065] device: 'ttySL12': device_add
[ 5.456329] PM: Adding info for No Bus:ttySL12
[ 5.458241] device: 'ttySL13': device_add
[ 5.459327] PM: Adding info for No Bus:ttySL13
[ 5.460225] device: 'ttySL14': device_add
[ 5.461385] PM: Adding info for No Bus:ttySL14
[ 5.462228] device: 'ttySL15': device_add
[ 5.463375] PM: Adding info for No Bus:ttySL15
[ 5.464235] device: 'ttySL16': device_add
[ 5.465374] PM: Adding info for No Bus:ttySL16
[ 5.466231] device: 'ttySL17': device_add
[ 5.468147] PM: Adding info for No Bus:ttySL17
[ 5.469227] device: 'ttySL18': device_add
[ 5.471280] PM: Adding info for No Bus:ttySL18
[ 5.473066] device: 'ttySL19': device_add
[ 5.474333] PM: Adding info for No Bus:ttySL19
[ 5.476241] device: 'ttySL20': device_add
[ 5.477339] PM: Adding info for No Bus:ttySL20
[ 5.478225] device: 'ttySL21': device_add
[ 5.479377] PM: Adding info for No Bus:ttySL21
[ 5.480226] device: 'ttySL22': device_add
[ 5.481376] PM: Adding info for No Bus:ttySL22
[ 5.482235] device: 'ttySL23': device_add
[ 5.484019] PM: Adding info for No Bus:ttySL23
[ 5.485224] device: 'ttySL24': device_add
[ 5.487164] PM: Adding info for No Bus:ttySL24
[ 5.488228] device: 'ttySL25': device_add
[ 5.490306] PM: Adding info for No Bus:ttySL25
[ 5.492089] device: 'ttySL26': device_add
[ 5.493339] PM: Adding info for No Bus:ttySL26
[ 5.495245] device: 'ttySL27': device_add
[ 5.496331] PM: Adding info for No Bus:ttySL27
[ 5.497225] device: 'ttySL28': device_add
[ 5.498377] PM: Adding info for No Bus:ttySL28
[ 5.499227] device: 'ttySL29': device_add
[ 5.500388] PM: Adding info for No Bus:ttySL29
[ 5.501229] device: 'ttySL30': device_add
[ 5.503037] PM: Adding info for No Bus:ttySL30
[ 5.504231] device: 'ttySL31': device_add
[ 5.506177] PM: Adding info for No Bus:ttySL31
[ 5.507229] device: 'ttySL32': device_add
[ 5.509334] PM: Adding info for No Bus:ttySL32
[ 5.511123] device: 'ttySL33': device_add
[ 5.512331] PM: Adding info for No Bus:ttySL33
[ 5.514190] device: 'ttySL34': device_add
[ 5.515429] PM: Adding info for No Bus:ttySL34
[ 5.516235] device: 'ttySL35': device_add
[ 5.517390] PM: Adding info for No Bus:ttySL35
[ 5.518234] device: 'ttySL36': device_add
[ 5.519381] PM: Adding info for No Bus:ttySL36
[ 5.520236] device: 'ttySL37': device_add
[ 5.522115] PM: Adding info for No Bus:ttySL37
[ 5.523232] device: 'ttySL38': device_add
[ 5.525279] PM: Adding info for No Bus:ttySL38
[ 5.527075] device: 'ttySL39': device_add
[ 5.528334] PM: Adding info for No Bus:ttySL39
[ 5.530241] device: 'ttySL40': device_add
[ 5.531334] PM: Adding info for No Bus:ttySL40
[ 5.532230] device: 'ttySL41': device_add
[ 5.533393] PM: Adding info for No Bus:ttySL41
[ 5.534237] device: 'ttySL42': device_add
[ 5.535395] PM: Adding info for No Bus:ttySL42
[ 5.536234] device: 'ttySL43': device_add
[ 5.538078] PM: Adding info for No Bus:ttySL43
[ 5.539232] device: 'ttySL44': device_add
[ 5.541233] PM: Adding info for No Bus:ttySL44
[ 5.542232] device: 'ttySL45': device_add
[ 5.544344] PM: Adding info for No Bus:ttySL45
[ 5.546184] device: 'ttySL46': device_add
[ 5.547335] PM: Adding info for No Bus:ttySL46
[ 5.548230] device: 'ttySL47': device_add
[ 5.549395] PM: Adding info for No Bus:ttySL47
[ 5.550231] device: 'ttySL48': device_add
[ 5.551384] PM: Adding info for No Bus:ttySL48
[ 5.552234] device: 'ttySL49': device_add
[ 5.553385] PM: Adding info for No Bus:ttySL49
[ 5.554238] device: 'ttySL50': device_add
[ 5.556171] PM: Adding info for No Bus:ttySL50
[ 5.557242] device: 'ttySL51': device_add
[ 5.559327] PM: Adding info for No Bus:ttySL51
[ 5.561122] device: 'ttySL52': device_add
[ 5.562342] PM: Adding info for No Bus:ttySL52
[ 5.564171] device: 'ttySL53': device_add
[ 5.565441] PM: Adding info for No Bus:ttySL53
[ 5.566232] device: 'ttySL54': device_add
[ 5.567386] PM: Adding info for No Bus:ttySL54
[ 5.568235] device: 'ttySL55': device_add
[ 5.569387] PM: Adding info for No Bus:ttySL55
[ 5.570235] device: 'ttySL56': device_add
[ 5.572116] PM: Adding info for No Bus:ttySL56
[ 5.573231] device: 'ttySL57': device_add
[ 5.575274] PM: Adding info for No Bus:ttySL57
[ 5.577065] device: 'ttySL58': device_add
[ 5.578339] PM: Adding info for No Bus:ttySL58
[ 5.580242] device: 'ttySL59': device_add
[ 5.581351] PM: Adding info for No Bus:ttySL59
[ 5.582228] device: 'ttySL60': device_add
[ 5.583391] PM: Adding info for No Bus:ttySL60
[ 5.584236] device: 'ttySL61': device_add
[ 5.585388] PM: Adding info for No Bus:ttySL61
[ 5.586233] device: 'ttySL62': device_add
[ 5.588083] PM: Adding info for No Bus:ttySL62
[ 5.589271] device: 'ttySL63': device_add
[ 5.591287] PM: Adding info for No Bus:ttySL63
[ 5.593076] device: 'ttySL64': device_add
[ 5.594347] PM: Adding info for No Bus:ttySL64
[ 5.596246] device: 'ttySL65': device_add
[ 5.597353] PM: Adding info for No Bus:ttySL65
[ 5.598230] device: 'ttySL66': device_add
[ 5.599391] PM: Adding info for No Bus:ttySL66
[ 5.600234] device: 'ttySL67': device_add
[ 5.601390] PM: Adding info for No Bus:ttySL67
[ 5.602240] device: 'ttySL68': device_add
[ 5.604128] PM: Adding info for No Bus:ttySL68
[ 5.605241] device: 'ttySL69': device_add
[ 5.607292] PM: Adding info for No Bus:ttySL69
[ 5.609076] device: 'ttySL70': device_add
[ 5.610342] PM: Adding info for No Bus:ttySL70
[ 5.612247] device: 'ttySL71': device_add
[ 5.613353] PM: Adding info for No Bus:ttySL71
[ 5.614233] device: 'ttySL72': device_add
[ 5.615393] PM: Adding info for No Bus:ttySL72
[ 5.616232] device: 'ttySL73': device_add
[ 5.617391] PM: Adding info for No Bus:ttySL73
[ 5.618235] device: 'ttySL74': device_add
[ 5.620164] PM: Adding info for No Bus:ttySL74
[ 5.621231] device: 'ttySL75': device_add
[ 5.623360] PM: Adding info for No Bus:ttySL75
[ 5.625170] device: 'ttySL76': device_add
[ 5.626349] PM: Adding info for No Bus:ttySL76
[ 5.627230] device: 'ttySL77': device_add
[ 5.628404] PM: Adding info for No Bus:ttySL77
[ 5.629233] device: 'ttySL78': device_add
[ 5.630394] PM: Adding info for No Bus:ttySL78
[ 5.631235] device: 'ttySL79': device_add
[ 5.633036] PM: Adding info for No Bus:ttySL79
[ 5.634236] device: 'ttySL80': device_add
[ 5.636203] PM: Adding info for No Bus:ttySL80
[ 5.637232] device: 'ttySL81': device_add
[ 5.639349] PM: Adding info for No Bus:ttySL81
[ 5.641171] device: 'ttySL82': device_add
[ 5.642350] PM: Adding info for No Bus:ttySL82
[ 5.643229] device: 'ttySL83': device_add
[ 5.644411] PM: Adding info for No Bus:ttySL83
[ 5.645230] device: 'ttySL84': device_add
[ 5.646396] PM: Adding info for No Bus:ttySL84
[ 5.647234] device: 'ttySL85': device_add
[ 5.649026] PM: Adding info for No Bus:ttySL85
[ 5.650230] device: 'ttySL86': device_add
[ 5.652188] PM: Adding info for No Bus:ttySL86
[ 5.653239] device: 'ttySL87': device_add
[ 5.655353] PM: Adding info for No Bus:ttySL87
[ 5.657171] device: 'ttySL88': device_add
[ 5.658371] PM: Adding info for No Bus:ttySL88
[ 5.659228] device: 'ttySL89': device_add
[ 5.660407] PM: Adding info for No Bus:ttySL89
[ 5.661233] device: 'ttySL90': device_add
[ 5.662398] PM: Adding info for No Bus:ttySL90
[ 5.663234] device: 'ttySL91': device_add
[ 5.665071] PM: Adding info for No Bus:ttySL91
[ 5.666274] device: 'ttySL92': device_add
[ 5.668291] PM: Adding info for No Bus:ttySL92
[ 5.670089] device: 'ttySL93': device_add
[ 5.671351] PM: Adding info for No Bus:ttySL93
[ 5.673248] device: 'ttySL94': device_add
[ 5.674358] PM: Adding info for No Bus:ttySL94
[ 5.675230] device: 'ttySL95': device_add
[ 5.676410] PM: Adding info for No Bus:ttySL95
[ 5.677231] device: 'ttySL96': device_add
[ 5.678401] PM: Adding info for No Bus:ttySL96
[ 5.679235] device: 'ttySL97': device_add
[ 5.681133] PM: Adding info for No Bus:ttySL97
[ 5.682238] device: 'ttySL98': device_add
[ 5.684317] PM: Adding info for No Bus:ttySL98
[ 5.686124] device: 'ttySL99': device_add
[ 5.687352] PM: Adding info for No Bus:ttySL99
[ 5.689180] device: 'ttySL100': device_add
[ 5.690445] PM: Adding info for No Bus:ttySL100
[ 5.691233] device: 'ttySL101': device_add
[ 5.693130] PM: Adding info for No Bus:ttySL101
[ 5.694238] device: 'ttySL102': device_add
[ 5.695418] PM: Adding info for No Bus:ttySL102
[ 5.696236] device: 'ttySL103': device_add
[ 5.697402] PM: Adding info for No Bus:ttySL103
[ 5.698235] device: 'ttySL104': device_add
[ 5.700164] PM: Adding info for No Bus:ttySL104
[ 5.702058] device: 'ttySL105': device_add
[ 5.703357] PM: Adding info for No Bus:ttySL105
[ 5.704357] device: 'ttySL106': device_add
[ 5.705419] PM: Adding info for No Bus:ttySL106
[ 5.706237] device: 'ttySL107': device_add
[ 5.708333] PM: Adding info for No Bus:ttySL107
[ 5.710243] device: 'ttySL108': device_add
[ 5.711356] PM: Adding info for No Bus:ttySL108
[ 5.712230] device: 'ttySL109': device_add
[ 5.714101] PM: Adding info for No Bus:ttySL109
[ 5.715233] device: 'ttySL110': device_add
[ 5.716423] PM: Adding info for No Bus:ttySL110
[ 5.718211] device: 'ttySL111': device_add
[ 5.719416] PM: Adding info for No Bus:ttySL111
[ 5.720234] device: 'ttySL112': device_add
[ 5.722135] PM: Adding info for No Bus:ttySL112
[ 5.723234] device: 'ttySL113': device_add
[ 5.724422] PM: Adding info for No Bus:ttySL113
[ 5.725235] device: 'ttySL114': device_add
[ 5.726408] PM: Adding info for No Bus:ttySL114
[ 5.727235] device: 'ttySL115': device_add
[ 5.729164] PM: Adding info for No Bus:ttySL115
[ 5.730233] device: 'ttySL116': device_add
[ 5.731417] PM: Adding info for No Bus:ttySL116
[ 5.732234] device: 'ttySL117': device_add
[ 5.733407] PM: Adding info for No Bus:ttySL117
[ 5.734240] device: 'ttySL118': device_add
[ 5.736180] PM: Adding info for No Bus:ttySL118
[ 5.738062] device: 'ttySL119': device_add
[ 5.739368] PM: Adding info for No Bus:ttySL119
[ 5.740230] device: 'ttySL120': device_add
[ 5.741408] PM: Adding info for No Bus:ttySL120
[ 5.742278] device: 'ttySL121': device_add
[ 5.744265] PM: Adding info for No Bus:ttySL121
[ 5.746165] device: 'ttySL122': device_add
[ 5.747371] PM: Adding info for No Bus:ttySL122
[ 5.748239] device: 'ttySL123': device_add
[ 5.750041] PM: Adding info for No Bus:ttySL123
[ 5.751233] device: 'ttySL124': device_add
[ 5.753366] PM: Adding info for No Bus:ttySL124
[ 5.755168] device: 'ttySL125': device_add
[ 5.756421] PM: Adding info for No Bus:ttySL125
[ 5.757236] device: 'ttySL126': device_add
[ 5.759127] PM: Adding info for No Bus:ttySL126
[ 5.760235] device: 'ttySL127': device_add
[ 5.761425] PM: Adding info for No Bus:ttySL127
[ 5.762240] SyncLink serial driver $Revision: 4.38 $, tty major#251
[ 5.763061] initcall synclink_init+0x0/0x140 returned 0 after 339843 usecs
[ 5.764014] calling synclinkmp_init+0x0/0x193 @ 1
[ 5.765006] SyncLink MultiPort driver $Revision: 4.38 $
[ 5.766012] bus: 'pci': add driver synclinkmp
[ 5.768234] device: 'ttySLM0': device_add
[ 5.769426] PM: Adding info for No Bus:ttySLM0
[ 5.770240] device: 'ttySLM1': device_add
[ 5.771408] PM: Adding info for No Bus:ttySLM1
[ 5.772237] device: 'ttySLM2': device_add
[ 5.774174] PM: Adding info for No Bus:ttySLM2
[ 5.775233] device: 'ttySLM3': device_add
[ 5.777345] PM: Adding info for No Bus:ttySLM3
[ 5.779155] device: 'ttySLM4': device_add
[ 5.780359] PM: Adding info for No Bus:ttySLM4
[ 5.781231] device: 'ttySLM5': device_add
[ 5.782419] PM: Adding info for No Bus:ttySLM5
[ 5.783233] device: 'ttySLM6': device_add
[ 5.784416] PM: Adding info for No Bus:ttySLM6
[ 5.785237] device: 'ttySLM7': device_add
[ 5.787092] PM: Adding info for No Bus:ttySLM7
[ 5.788236] device: 'ttySLM8': device_add
[ 5.790271] PM: Adding info for No Bus:ttySLM8
[ 5.792064] device: 'ttySLM9': device_add
[ 5.793362] PM: Adding info for No Bus:ttySLM9
[ 5.795248] device: 'ttySLM10': device_add
[ 5.796362] PM: Adding info for No Bus:ttySLM10
[ 5.797231] device: 'ttySLM11': device_add
[ 5.799127] PM: Adding info for No Bus:ttySLM11
[ 5.800232] device: 'ttySLM12': device_add
[ 5.801428] PM: Adding info for No Bus:ttySLM12
[ 5.802250] device: 'ttySLM13': device_add
[ 5.803415] PM: Adding info for No Bus:ttySLM13
[ 5.804242] device: 'ttySLM14': device_add
[ 5.806195] PM: Adding info for No Bus:ttySLM14
[ 5.808075] device: 'ttySLM15': device_add
[ 5.809376] PM: Adding info for No Bus:ttySLM15
[ 5.810231] device: 'ttySLM16': device_add
[ 5.811413] PM: Adding info for No Bus:ttySLM16
[ 5.812235] device: 'ttySLM17': device_add
[ 5.814250] PM: Adding info for No Bus:ttySLM17
[ 5.816124] device: 'ttySLM18': device_add
[ 5.817365] PM: Adding info for No Bus:ttySLM18
[ 5.818230] device: 'ttySLM19': device_add
[ 5.819414] PM: Adding info for No Bus:ttySLM19
[ 5.820234] device: 'ttySLM20': device_add
[ 5.822314] PM: Adding info for No Bus:ttySLM20
[ 5.824237] device: 'ttySLM21': device_add
[ 5.825369] PM: Adding info for No Bus:ttySLM21
[ 5.826273] device: 'ttySLM22': device_add
[ 5.828160] PM: Adding info for No Bus:ttySLM22
[ 5.829235] device: 'ttySLM23': device_add
[ 5.830428] PM: Adding info for No Bus:ttySLM23
[ 5.831236] device: 'ttySLM24': device_add
[ 5.832416] PM: Adding info for No Bus:ttySLM24
[ 5.833238] device: 'ttySLM25': device_add
[ 5.835206] PM: Adding info for No Bus:ttySLM25
[ 5.837106] device: 'ttySLM26': device_add
[ 5.838376] PM: Adding info for No Bus:ttySLM26
[ 5.839233] device: 'ttySLM27': device_add
[ 5.840418] PM: Adding info for No Bus:ttySLM27
[ 5.841237] device: 'ttySLM28': device_add
[ 5.843284] PM: Adding info for No Bus:ttySLM28
[ 5.845186] device: 'ttySLM29': device_add
[ 5.846379] PM: Adding info for No Bus:ttySLM29
[ 5.847230] device: 'ttySLM30': device_add
[ 5.849072] PM: Adding info for No Bus:ttySLM30
[ 5.850250] device: 'ttySLM31': device_add
[ 5.851426] PM: Adding info for No Bus:ttySLM31
[ 5.853214] device: 'ttySLM32': device_add
[ 5.854435] PM: Adding info for No Bus:ttySLM32
[ 5.855236] device: 'ttySLM33': device_add
[ 5.857162] PM: Adding info for No Bus:ttySLM33
[ 5.858235] device: 'ttySLM34': device_add
[ 5.859419] PM: Adding info for No Bus:ttySLM34
[ 5.860234] device: 'ttySLM35': device_add
[ 5.861441] PM: Adding info for No Bus:ttySLM35
[ 5.862237] device: 'ttySLM36': device_add
[ 5.864234] PM: Adding info for No Bus:ttySLM36
[ 5.866123] device: 'ttySLM37': device_add
[ 5.867371] PM: Adding info for No Bus:ttySLM37
[ 5.868231] device: 'ttySLM38': device_add
[ 5.869431] PM: Adding info for No Bus:ttySLM38
[ 5.870233] device: 'ttySLM39': device_add
[ 5.872310] PM: Adding info for No Bus:ttySLM39
[ 5.874237] device: 'ttySLM40': device_add
[ 5.875373] PM: Adding info for No Bus:ttySLM40
[ 5.876231] device: 'ttySLM41': device_add
[ 5.878150] PM: Adding info for No Bus:ttySLM41
[ 5.879232] device: 'ttySLM42': device_add
[ 5.880423] PM: Adding info for No Bus:ttySLM42
[ 5.881236] device: 'ttySLM43': device_add
[ 5.882429] PM: Adding info for No Bus:ttySLM43
[ 5.883239] device: 'ttySLM44': device_add
[ 5.885254] PM: Adding info for No Bus:ttySLM44
[ 5.887122] device: 'ttySLM45': device_add
[ 5.888376] PM: Adding info for No Bus:ttySLM45
[ 5.889230] device: 'ttySLM46': device_add
[ 5.890423] PM: Adding info for No Bus:ttySLM46
[ 5.891234] device: 'ttySLM47': device_add
[ 5.893311] PM: Adding info for No Bus:ttySLM47
[ 5.895237] device: 'ttySLM48': device_add
[ 5.896377] PM: Adding info for No Bus:ttySLM48
[ 5.897239] device: 'ttySLM49': device_add
[ 5.899138] PM: Adding info for No Bus:ttySLM49
[ 5.900232] device: 'ttySLM50': device_add
[ 5.901444] PM: Adding info for No Bus:ttySLM50
[ 5.902277] device: 'ttySLM51': device_add
[ 5.903435] PM: Adding info for No Bus:ttySLM51
[ 5.904244] device: 'ttySLM52': device_add
[ 5.906275] PM: Adding info for No Bus:ttySLM52
[ 5.908168] device: 'ttySLM53': device_add
[ 5.909388] PM: Adding info for No Bus:ttySLM53
[ 5.910232] device: 'ttySLM54': device_add
[ 5.912074] PM: Adding info for No Bus:ttySLM54
[ 5.913233] device: 'ttySLM55': device_add
[ 5.914438] PM: Adding info for No Bus:ttySLM55
[ 5.916216] device: 'ttySLM56': device_add
[ 5.917438] PM: Adding info for No Bus:ttySLM56
[ 5.918235] device: 'ttySLM57': device_add
[ 5.920189] PM: Adding info for No Bus:ttySLM57
[ 5.922082] device: 'ttySLM58': device_add
[ 5.923380] PM: Adding info for No Bus:ttySLM58
[ 5.924238] device: 'ttySLM59': device_add
[ 5.925439] PM: Adding info for No Bus:ttySLM59
[ 5.926236] device: 'ttySLM60': device_add
[ 5.928302] PM: Adding info for No Bus:ttySLM60
[ 5.930194] device: 'ttySLM61': device_add
[ 5.931380] PM: Adding info for No Bus:ttySLM61
[ 5.932233] device: 'ttySLM62': device_add
[ 5.934121] PM: Adding info for No Bus:ttySLM62
[ 5.935231] device: 'ttySLM63': device_add
[ 5.936444] PM: Adding info for No Bus:ttySLM63
[ 5.937235] device: 'ttySLM64': device_add
[ 5.938429] PM: Adding info for No Bus:ttySLM64
[ 5.939236] device: 'ttySLM65': device_add
[ 5.941206] PM: Adding info for No Bus:ttySLM65
[ 5.943115] device: 'ttySLM66': device_add
[ 5.944400] PM: Adding info for No Bus:ttySLM66
[ 5.945241] device: 'ttySLM67': device_add
[ 5.946435] PM: Adding info for No Bus:ttySLM67
[ 5.947238] device: 'ttySLM68': device_add
[ 5.949370] PM: Adding info for No Bus:ttySLM68
[ 5.951238] device: 'ttySLM69': device_add
[ 5.952384] PM: Adding info for No Bus:ttySLM69
[ 5.953230] device: 'ttySLM70': device_add
[ 5.955160] PM: Adding info for No Bus:ttySLM70
[ 5.956233] device: 'ttySLM71': device_add
[ 5.957442] PM: Adding info for No Bus:ttySLM71
[ 5.958234] device: 'ttySLM72': device_add
[ 5.959433] PM: Adding info for No Bus:ttySLM72
[ 5.960237] device: 'ttySLM73': device_add
[ 5.962263] PM: Adding info for No Bus:ttySLM73
[ 5.964165] device: 'ttySLM74': device_add
[ 5.965395] PM: Adding info for No Bus:ttySLM74
[ 5.966230] device: 'ttySLM75': device_add
[ 5.968087] PM: Adding info for No Bus:ttySLM75
[ 5.969232] device: 'ttySLM76': device_add
[ 5.970441] PM: Adding info for No Bus:ttySLM76
[ 5.972214] device: 'ttySLM77': device_add
[ 5.973447] PM: Adding info for No Bus:ttySLM77
[ 5.974241] device: 'ttySLM78': device_add
[ 5.976200] PM: Adding info for No Bus:ttySLM78
[ 5.978086] device: 'ttySLM79': device_add
[ 5.979388] PM: Adding info for No Bus:ttySLM79
[ 5.980275] device: 'ttySLM80': device_add
[ 5.981455] PM: Adding info for No Bus:ttySLM80
[ 5.982237] device: 'ttySLM81': device_add
[ 5.984390] PM: Adding info for No Bus:ttySLM81
[ 5.986168] device: 'ttySLM82': device_add
[ 5.987490] PM: Adding info for No Bus:ttySLM82
[ 5.988240] device: 'ttySLM83': device_add
[ 5.990243] PM: Adding info for No Bus:ttySLM83
[ 5.992138] device: 'ttySLM84': device_add
[ 5.993402] PM: Adding info for No Bus:ttySLM84
[ 5.994237] device: 'ttySLM85': device_add
[ 5.996017] PM: Adding info for No Bus:ttySLM85
[ 5.997233] device: 'ttySLM86': device_add
[ 5.999402] PM: Adding info for No Bus:ttySLM86
[ 6.001184] device: 'ttySLM87': device_add
[ 6.002446] PM: Adding info for No Bus:ttySLM87
[ 6.003239] device: 'ttySLM88': device_add
[ 6.005174] PM: Adding info for No Bus:ttySLM88
[ 6.007062] device: 'ttySLM89': device_add
[ 6.008400] PM: Adding info for No Bus:ttySLM89
[ 6.009233] device: 'ttySLM90': device_add
[ 6.010440] PM: Adding info for No Bus:ttySLM90
[ 6.011237] device: 'ttySLM91': device_add
[ 6.013313] PM: Adding info for No Bus:ttySLM91
[ 6.015242] device: 'ttySLM92': device_add
[ 6.016417] PM: Adding info for No Bus:ttySLM92
[ 6.017231] device: 'ttySLM93': device_add
[ 6.019194] PM: Adding info for No Bus:ttySLM93
[ 6.021076] device: 'ttySLM94': device_add
[ 6.022392] PM: Adding info for No Bus:ttySLM94
[ 6.023233] device: 'ttySLM95': device_add
[ 6.024459] PM: Adding info for No Bus:ttySLM95
[ 6.025235] device: 'ttySLM96': device_add
[ 6.027344] PM: Adding info for No Bus:ttySLM96
[ 6.029238] device: 'ttySLM97': device_add
[ 6.030394] PM: Adding info for No Bus:ttySLM97
[ 6.031231] device: 'ttySLM98': device_add
[ 6.033180] PM: Adding info for No Bus:ttySLM98
[ 6.035061] device: 'ttySLM99': device_add
[ 6.036394] PM: Adding info for No Bus:ttySLM99
[ 6.037233] device: 'ttySLM100': device_add
[ 6.038441] PM: Adding info for No Bus:ttySLM100
[ 6.039237] device: 'ttySLM101': device_add
[ 6.040454] PM: Adding info for No Bus:ttySLM101
[ 6.041236] device: 'ttySLM102': device_add
[ 6.043110] PM: Adding info for No Bus:ttySLM102
[ 6.045113] device: 'ttySLM103': device_add
[ 6.046397] PM: Adding info for No Bus:ttySLM103
[ 6.047232] device: 'ttySLM104': device_add
[ 6.049262] PM: Adding info for No Bus:ttySLM104
[ 6.051245] device: 'ttySLM105': device_add
[ 6.052398] PM: Adding info for No Bus:ttySLM105
[ 6.053230] device: 'ttySLM106': device_add
[ 6.055399] PM: Adding info for No Bus:ttySLM106
[ 6.056234] device: 'ttySLM107': device_add
[ 6.057457] PM: Adding info for No Bus:ttySLM107
[ 6.058235] device: 'ttySLM108': device_add
[ 6.059448] PM: Adding info for No Bus:ttySLM108
[ 6.060278] device: 'ttySLM109': device_add
[ 6.062148] PM: Adding info for No Bus:ttySLM109
[ 6.064130] device: 'ttySLM110': device_add
[ 6.065409] PM: Adding info for No Bus:ttySLM110
[ 6.066232] device: 'ttySLM111': device_add
[ 6.068280] PM: Adding info for No Bus:ttySLM111
[ 6.070255] device: 'ttySLM112': device_add
[ 6.071399] PM: Adding info for No Bus:ttySLM112
[ 6.072232] device: 'ttySLM113': device_add
[ 6.073462] PM: Adding info for No Bus:ttySLM113
[ 6.074239] device: 'ttySLM114': device_add
[ 6.076029] PM: Adding info for No Bus:ttySLM114
[ 6.077235] device: 'ttySLM115': device_add
[ 6.078449] PM: Adding info for No Bus:ttySLM115
[ 6.079239] device: 'ttySLM116': device_add
[ 6.081167] PM: Adding info for No Bus:ttySLM116
[ 6.083122] device: 'ttySLM117': device_add
[ 6.084418] PM: Adding info for No Bus:ttySLM117
[ 6.085231] device: 'ttySLM118': device_add
[ 6.087287] PM: Adding info for No Bus:ttySLM118
[ 6.089245] device: 'ttySLM119': device_add
[ 6.093528] PM: Adding info for No Bus:ttySLM119
[ 6.098732] device: 'ttySLM120': device_add
[ 6.099484] PM: Adding info for No Bus:ttySLM120
[ 6.100248] device: 'ttySLM121': device_add
[ 6.102246] PM: Adding info for No Bus:ttySLM121
[ 6.104186] device: 'ttySLM122': device_add
[ 6.105448] PM: Adding info for No Bus:ttySLM122
[ 6.106237] device: 'ttySLM123': device_add
[ 6.108422] PM: Adding info for No Bus:ttySLM123
[ 6.109235] device: 'ttySLM124': device_add
[ 6.111026] PM: Adding info for No Bus:ttySLM124
[ 6.112231] device: 'ttySLM125': device_add
[ 6.113454] PM: Adding info for No Bus:ttySLM125
[ 6.114244] device: 'ttySLM126': device_add
[ 6.116155] PM: Adding info for No Bus:ttySLM126
[ 6.118126] device: 'ttySLM127': device_add
[ 6.119405] PM: Adding info for No Bus:ttySLM127
[ 6.120234] SyncLink MultiPort driver $Revision: 4.38 $, tty major#250
[ 6.121061] initcall synclinkmp_init+0x0/0x193 returned 0 after 347656 usecs
[ 6.122015] calling slgt_init+0x0/0x1ba @ 1
[ 6.123006] SyncLink GT
[ 6.124035] SyncLink GT, tty major#249
[ 6.125063] bus: 'pci': add driver synclink_gt
[ 6.126273] SyncLink GT no devices found
[ 6.127051] initcall slgt_init+0x0/0x1ba returned 0 after 3906 usecs
[ 6.128009] calling raw_init+0x0/0xe5 @ 1
[ 6.129014] device class 'raw': registering
[ 6.130224] device: 'rawctl': device_add
[ 6.131312] PM: Adding info for No Bus:rawctl
[ 6.132232] initcall raw_init+0x0/0xe5 returned 0 after 2929 usecs
[ 6.133057] calling lp_init_module+0x0/0xc9 @ 1
[ 6.134037] device class 'printer': registering
[ 6.136241] lp: driver loaded but no devices found
[ 6.137010] initcall lp_init_module+0x0/0xc9 returned 0 after 2929 usecs
[ 6.138008] calling applicom_init+0x0/0x4e9 @ 1
[ 6.139006] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 6.140078] ac.o: No PCI boards found.
[ 6.141006] ac.o: For an ISA board you must supply memory and irq parameters.
[ 6.142008] initcall applicom_init+0x0/0x4e9 returned -6 after 2929 usecs
[ 6.143008] initcall applicom_init+0x0/0x4e9 returned with error code -6
[ 6.144053] calling nvram_init+0x0/0x82 @ 1
[ 6.145025] device: 'nvram': device_add
[ 6.146258] PM: Adding info for No Bus:nvram
[ 6.148244] Non-volatile memory driver v1.3
[ 6.149011] initcall nvram_init+0x0/0x82 returned 0 after 3906 usecs
[ 6.150008] calling i8k_init+0x0/0x51 @ 1
[ 6.151010] initcall i8k_init+0x0/0x51 returned -19 after 0 usecs
[ 6.152059] calling timeriomem_rng_init+0x0/0x12 @ 1
[ 6.153010] bus: 'platform': add driver timeriomem_rng
[ 6.154237] initcall timeriomem_rng_init+0x0/0x12 returned 0 after 976 usecs
[ 6.155050] calling mod_init+0x0/0x220 @ 1
[ 6.157426] initcall mod_init+0x0/0x220 returned -19 after 976 usecs
[ 6.158007] calling ppdev_init+0x0/0xca @ 1
[ 6.159019] device class 'ppdev': registering
[ 6.160218] ppdev: user-space parallel port driver
[ 6.161057] initcall ppdev_init+0x0/0xca returned 0 after 1953 usecs
[ 6.162014] calling pc8736x_gpio_init+0x0/0x33c @ 1
[ 6.163019] Registering platform device 'pc8736x_gpio.0'. Parent at platform
[ 6.164013] device: 'pc8736x_gpio.0': device_add
[ 6.165068] bus: 'platform': add device pc8736x_gpio.0
[ 6.166042] PM: Adding info for platform:pc8736x_gpio.0
[ 6.167215] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 6.168064] platform pc8736x_gpio.0: no device found
[ 6.169008] PM: Removing info for platform:pc8736x_gpio.0
[ 6.170069] bus: 'platform': remove device pc8736x_gpio.0
[ 6.171210] initcall pc8736x_gpio_init+0x0/0x33c returned -19 after 7812 usecs
[ 6.172100] calling nsc_gpio_init+0x0/0x16 @ 1
[ 6.173007] nsc_gpio initializing
[ 6.174012] initcall nsc_gpio_init+0x0/0x16 returned 0 after 976 usecs
[ 6.175007] calling tlclk_init+0x0/0x220 @ 1
[ 6.176069] telclk_interrup = 0xf non-mcpbl0010 hw.
[ 6.177028] initcall tlclk_init+0x0/0x220 returned -6 after 976 usecs
[ 6.178008] initcall tlclk_init+0x0/0x220 returned with error code -6
[ 6.179007] calling mwave_init+0x0/0x1dd @ 1
[ 6.180056] smapi::smapi_init, ERROR invalid usSmapiID
[ 6.181006] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 6.182006] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 6.183006] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 6.184052] initcall mwave_init+0x0/0x1dd returned -5 after 3906 usecs
[ 6.185008] initcall mwave_init+0x0/0x1dd returned with error code -5
[ 6.186007] calling agp_init+0x0/0x26 @ 1
[ 6.187006] Linux agpgart interface v0.103
[ 6.188047] initcall agp_init+0x0/0x26 returned 0 after 976 usecs
[ 6.189007] calling agp_amd64_mod_init+0x0/0x22 @ 1
[ 6.190008] initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs
[ 6.191007] calling agp_intel_init+0x0/0x29 @ 1
[ 6.192051] bus: 'pci': add driver agpgart-intel
[ 6.194065] initcall agp_intel_init+0x0/0x29 returned 0 after 1953 usecs
[ 6.195009] calling agp_via_init+0x0/0x29 @ 1
[ 6.196008] bus: 'pci': add driver agpgart-via
[ 6.197251] initcall agp_via_init+0x0/0x29 returned 0 after 976 usecs
[ 6.198099] calling init_ipwireless+0x0/0x3c @ 1
[ 6.199007] ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba
[ 6.200020] bus: 'pcmcia': add driver ipwireless
[ 6.201225] initcall init_ipwireless+0x0/0x3c returned 0 after 1953 usecs
[ 6.202103] calling synclink_cs_init+0x0/0x15e @ 1
[ 6.203008] SyncLink PC Card driver $Revision: 4.34 $
[ 6.204011] bus: 'pcmcia': add driver synclink_cs
[ 6.206227] device: 'ttySLP0': device_add
[ 6.207507] PM: Adding info for No Bus:ttySLP0
[ 6.208236] device: 'ttySLP1': device_add
[ 6.210049] PM: Adding info for No Bus:ttySLP1
[ 6.211236] device: 'ttySLP2': device_add
[ 6.213266] PM: Adding info for No Bus:ttySLP2
[ 6.215074] device: 'ttySLP3': device_add
[ 6.216417] PM: Adding info for No Bus:ttySLP3
[ 6.218191] SyncLink PC Card driver $Revision: 4.34 $, tty major#247
[ 6.219104] initcall synclink_cs_init+0x0/0x15e returned 0 after 15625 usecs
[ 6.220010] calling ipmi_init_msghandler_mod+0x0/0xd @ 1
[ 6.221009] bus: 'platform': add driver ipmi
[ 6.222242] ipmi message handler version 39.2
[ 6.223126] initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 1953 usecs
[ 6.224014] calling init_ipmi_devintf+0x0/0x108 @ 1
[ 6.225006] ipmi device interface
[ 6.226008] device class 'ipmi': registering
[ 6.227275] initcall init_ipmi_devintf+0x0/0x108 returned 0 after 1953 usecs
[ 6.228052] calling init_ipmi_si+0x0/0x25c @ 1
[ 6.229009] bus: 'platform': add driver ipmi_si
[ 6.231175] IPMI System Interface driver.
[ 6.232013] bus: 'pci': add driver ipmi_si
[ 6.242080] bus: 'pci': remove driver ipmi_si
[ 6.243314] driver: 'ipmi_si': driver_release
[ 6.244038] bus: 'platform': remove driver ipmi_si
[ 6.246204] driver: 'ipmi_si': driver_release
[ 6.247104] ipmi_si: Unable to find any System Interface(s)
[ 6.248009] initcall init_ipmi_si+0x0/0x25c returned -19 after 18554 usecs
[ 6.249008] calling ipmi_poweroff_init+0x0/0x8d @ 1
[ 6.250006] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 6.251069] initcall ipmi_poweroff_init+0x0/0x8d returned 0 after 976 usecs
[ 6.252008] calling hangcheck_init+0x0/0x8d @ 1
[ 6.253007] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 6.254010] Hangcheck: Using get_cycles().
[ 6.255054] initcall hangcheck_init+0x0/0x8d returned 0 after 1953 usecs
[ 6.256007] calling cn_proc_init+0x0/0x3d @ 1
[ 6.257031] initcall cn_proc_init+0x0/0x3d returned 0 after 0 usecs
[ 6.258054] calling serial8250_init+0x0/0x143 @ 1
[ 6.259008] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 6.260068] Registering platform device 'serial8250'. Parent at platform
[ 6.261009] device: 'serial8250': device_add
[ 6.262068] bus: 'platform': add device serial8250
[ 6.263034] PM: Adding info for platform:serial8250
[ 6.264223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.265104] device: 'ttyS0': device_add
[ 6.266543] PM: Adding info for No Bus:ttyS0
[ 6.267315] device: 'ttyS1': device_add
[ 6.269017] PM: Adding info for No Bus:ttyS1
[ 6.270249] device: 'ttyS2': device_add
[ 6.271482] PM: Adding info for No Bus:ttyS2
[ 6.272261] device: 'ttyS3': device_add
[ 6.273494] PM: Adding info for No Bus:ttyS3
[ 6.274256] bus: 'platform': add driver serial8250
[ 6.275090] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[ 6.276011] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 6.277017] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 6.278008] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 6.280101] initcall serial8250_init+0x0/0x143 returned 0 after 20507 usecs
[ 6.281011] calling serial8250_pci_init+0x0/0x1b @ 1
[ 6.282015] bus: 'pci': add driver serial
[ 6.283276] initcall serial8250_pci_init+0x0/0x1b returned 0 after 976 usecs
[ 6.284104] calling init_serial_cs+0x0/0x12 @ 1
[ 6.285033] bus: 'pcmcia': add driver serial_cs
[ 6.287180] initcall init_serial_cs+0x0/0x12 returned 0 after 1953 usecs
[ 6.288009] calling init_kgdboc+0x0/0x16 @ 1
[ 6.289008] initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs
[ 6.290008] calling parport_default_proc_register+0x0/0x1b @ 1
[ 6.291067] initcall parport_default_proc_register+0x0/0x1b returned 0 after 0 usecs
[ 6.292008] calling parport_pc_init+0x0/0xa7 @ 1
[ 6.293008] bus: 'platform': add driver parport_pc
[ 6.295242] Registering platform device 'parport_pc.956'. Parent at platform
[ 6.296010] device: 'parport_pc.956': device_add
[ 6.297017] bus: 'platform': add device parport_pc.956
[ 6.298033] PM: Adding info for platform:parport_pc.956
[ 6.299261] bus: 'platform': driver_probe_device: matched device parport_pc.956 with driver parport_pc
[ 6.301009] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.956
[ 6.302018] driver: 'parport_pc.956': driver_bound: bound to device 'parport_pc'
[ 6.303007] bus: 'platform': really_probe: bound device parport_pc.956 to driver parport_pc
[ 6.304094] PM: Removing info for platform:parport_pc.956
[ 6.306057] bus: 'platform': remove device parport_pc.956
[ 6.307235] Registering platform device 'parport_pc.888'. Parent at platform
[ 6.308053] device: 'parport_pc.888': device_add
[ 6.309017] bus: 'platform': add device parport_pc.888
[ 6.310031] PM: Adding info for platform:parport_pc.888
[ 6.312285] bus: 'platform': driver_probe_device: matched device parport_pc.888 with driver parport_pc
[ 6.313010] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.888
[ 6.314022] driver: 'parport_pc.888': driver_bound: bound to device 'parport_pc'
[ 6.315008] bus: 'platform': really_probe: bound device parport_pc.888 to driver parport_pc
[ 6.316112] parport0: PC-style at 0x378 (0x778)async_waiting @ 1
[ 6.319020] async_continuing @ 1 after 0 usec
[ 6.443068] [PCSPP,TRISTATE]
[ 6.446006] parport0: irq 7 detected
[ 6.529108] device: 'parport0': device_add
[ 6.530328] PM: Adding info for No Bus:parport0
[ 6.531362] device: 'lp0': device_add
[ 6.532230] PM: Adding info for No Bus:lp0
[ 6.533234] lp0: using parport0 (polling).
[ 6.535131] Registering platform device 'parport_pc.632'. Parent at platform
[ 6.536010] device: 'parport_pc.632': device_add
[ 6.537018] bus: 'platform': add device parport_pc.632
[ 6.539069] PM: Adding info for platform:parport_pc.632
[ 6.540217] bus: 'platform': driver_probe_device: matched device parport_pc.632 with driver parport_pc
[ 6.541053] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.632
[ 6.542020] driver: 'parport_pc.632': driver_bound: bound to device 'parport_pc'
[ 6.543008] bus: 'platform': really_probe: bound device parport_pc.632 to driver parport_pc
[ 6.544060] PM: Removing info for platform:parport_pc.632
[ 6.545115] bus: 'platform': remove device parport_pc.632
[ 6.546235] bus: 'pci': add driver parport_pc
[ 6.547320] initcall parport_pc_init+0x0/0xa7 returned 0 after 248046 usecs
[ 6.548011] calling parport_serial_init+0x0/0x1b @ 1
[ 6.549008] bus: 'pci': add driver parport_serial
[ 6.550251] initcall parport_serial_init+0x0/0x1b returned 0 after 976 usecs
[ 6.551100] calling init_parport_cs+0x0/0x12 @ 1
[ 6.552012] bus: 'pcmcia': add driver parport_cs
[ 6.554277] initcall init_parport_cs+0x0/0x12 returned 0 after 1953 usecs
[ 6.555014] calling parport_ax88796_init+0x0/0x12 @ 1
[ 6.556009] bus: 'platform': add driver ax88796-pp
[ 6.557230] initcall parport_ax88796_init+0x0/0x12 returned 0 after 976 usecs
[ 6.558101] calling topology_sysfs_init+0x0/0x82 @ 1
[ 6.559069] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs
[ 6.560008] calling cpqarray_init+0x0/0x6c @ 1
[ 6.561006] Compaq SMART2 Driver (v 2.6.0)
[ 6.562064] bus: 'pci': add driver cpqarray
[ 6.563262] bus: 'pci': remove driver cpqarray
[ 6.564296] driver: 'cpqarray': driver_release
[ 6.565022] initcall cpqarray_init+0x0/0x6c returned -19 after 3906 usecs
[ 6.566008] calling DAC960_init_module+0x0/0x4d @ 1
[ 6.567008] bus: 'pci': add driver DAC960
[ 6.569238] device: 'dac960_gam': device_add
[ 6.570247] PM: Adding info for No Bus:dac960_gam
[ 6.571222] initcall DAC960_init_module+0x0/0x4d returned 0 after 3906 usecs
[ 6.572058] calling pkt_init+0x0/0x1cd @ 1
[ 6.573083] device class 'pktcdvd': registering
[ 6.575085] device: 'pktcdvd': device_add
[ 6.576211] PM: Adding info for No Bus:pktcdvd
[ 6.578130] initcall pkt_init+0x0/0x1cd returned 0 after 4882 usecs
[ 6.579010] calling osdblk_init+0x0/0x83 @ 1
[ 6.580008] device class 'osdblk': registering
[ 6.581234] initcall osdblk_init+0x0/0x83 returned 0 after 976 usecs
[ 6.582101] calling carm_init+0x0/0x1b @ 1
[ 6.583012] bus: 'pci': add driver sx8
[ 6.585183] initcall carm_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.586100] calling ub_init+0x0/0x8e @ 1
[ 6.587014] bus: 'usb': add driver ub
[ 6.588225] usbcore: registered new interface driver ub
[ 6.589090] initcall ub_init+0x0/0x8e returned 0 after 1953 usecs
[ 6.590009] calling drbd_init+0x0/0x1b1 @ 1
[ 6.593797] drbd: initialized. Version: 8.3.7 (api:88/proto:86-91)
[ 6.594007] drbd: built-in
[ 6.595012] drbd: registered as block device major 147
[ 6.596059] drbd: minor_table @ 0xffff88003e0c87b0
[ 6.597009] initcall drbd_init+0x0/0x1b1 returned 0 after 5859 usecs
[ 6.598008] calling ibmasm_init+0x0/0x64 @ 1
[ 6.599020] bus: 'pci': add driver ibmasm
[ 6.600305] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 6.601051] initcall ibmasm_init+0x0/0x64 returned 0 after 1953 usecs
[ 6.602014] calling ad525x_init+0x0/0x14 @ 1
[ 6.603008] bus: 'i2c': add driver ad525x_dpot
[ 6.605097] i2c-core: driver [ad525x_dpot] registered
[ 6.606013] initcall ad525x_init+0x0/0x14 returned 0 after 2929 usecs
[ 6.607008] calling ics932s401_init+0x0/0x14 @ 1
[ 6.608007] bus: 'i2c': add driver ics932s401
[ 6.609276] i2c-core: driver [ics932s401] registered
[ 6.611012] initcall ics932s401_init+0x0/0x14 returned 0 after 2929 usecs
[ 6.612009] calling phantom_init+0x0/0x10b @ 1
[ 6.613010] device class 'phantom': registering
[ 6.615287] bus: 'pci': add driver phantom
[ 6.616255] Phantom Linux Driver, version n0.9.8, init OK
[ 6.617057] initcall phantom_init+0x0/0x10b returned 0 after 3906 usecs
[ 6.618009] calling ioc4_init+0x0/0x1b @ 1
[ 6.619008] bus: 'pci': add driver IOC4
[ 6.621279] initcall ioc4_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.622010] calling init_kgdbts+0x0/0x16 @ 1
[ 6.623014] initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs
[ 6.624008] calling isl29003_init+0x0/0x14 @ 1
[ 6.625062] bus: 'i2c': add driver isl29003
[ 6.627183] i2c-core: driver [isl29003] registered
[ 6.628053] initcall isl29003_init+0x0/0x14 returned 0 after 2929 usecs
[ 6.629008] calling ds1682_init+0x0/0x14 @ 1
[ 6.630007] bus: 'i2c': add driver ds1682
[ 6.631216] i2c-core: driver [ds1682] registered
[ 6.633011] initcall ds1682_init+0x0/0x14 returned 0 after 2929 usecs
[ 6.634008] calling at24_init+0x0/0x37 @ 1
[ 6.635012] bus: 'i2c': add driver at24
[ 6.636225] i2c-core: driver [at24] registered
[ 6.637101] initcall at24_init+0x0/0x37 returned 0 after 1953 usecs
[ 6.638008] calling max6875_init+0x0/0x14 @ 1
[ 6.639007] bus: 'i2c': add driver max6875
[ 6.640222] i2c-core: driver [max6875] registered
[ 6.641102] initcall max6875_init+0x0/0x14 returned 0 after 1953 usecs
[ 6.642012] calling sm501_base_init+0x0/0x27 @ 1
[ 6.643009] bus: 'platform': add driver sm501
[ 6.645205] bus: 'pci': add driver sm501
[ 6.646262] initcall sm501_base_init+0x0/0x27 returned 0 after 2929 usecs
[ 6.647055] calling pasic3_base_init+0x0/0x19 @ 1
[ 6.648009] bus: 'platform': add driver pasic3
[ 6.649223] bus: 'platform': remove driver pasic3
[ 6.650300] driver: 'pasic3': driver_release
[ 6.651015] initcall pasic3_base_init+0x0/0x19 returned -19 after 2929 usecs
[ 6.652008] calling adp5520_init+0x0/0x14 @ 1
[ 6.653007] bus: 'i2c': add driver adp5520
[ 6.655174] i2c-core: driver [adp5520] registered
[ 6.656011] initcall adp5520_init+0x0/0x14 returned 0 after 2929 usecs
[ 6.657007] calling scsi_tgt_init+0x0/0x86 @ 1
[ 6.659404] device: 'tgt': device_add
[ 6.660337] PM: Adding info for No Bus:tgt
[ 6.662269] initcall scsi_tgt_init+0x0/0x86 returned 0 after 3906 usecs
[ 6.663010] calling spi_transport_init+0x0/0x79 @ 1
[ 6.664011] device class 'spi_transport': registering
[ 6.666276] device class 'spi_host': registering
[ 6.668227] initcall spi_transport_init+0x0/0x79 returned 0 after 3906 usecs
[ 6.669009] calling iscsi_transport_init+0x0/0x14f @ 1
[ 6.670006] Loading iSCSI transport class v2.0-870.
[ 6.671006] device class 'iscsi_transport': registering
[ 6.673049] device class 'iscsi_endpoint': registering
[ 6.674222] device class 'iscsi_host': registering
[ 6.675328] device class 'iscsi_connection': registering
[ 6.677173] device class 'iscsi_session': registering
[ 6.678317] initcall iscsi_transport_init+0x0/0x14f returned 0 after 7812 usecs
[ 6.679010] calling ahc_linux_init+0x0/0x65 @ 1
[ 6.680021] bus: 'pci': add driver aic7xxx
[ 6.682269] initcall ahc_linux_init+0x0/0x65 returned 0 after 1953 usecs
[ 6.683009] calling init_st+0x0/0x103 @ 1
[ 6.684007] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 6.685012] device class 'scsi_tape': registering
[ 6.686265] bus: 'scsi': add driver st
[ 6.687313] initcall init_st+0x0/0x103 returned 0 after 2929 usecs
[ 6.688009] calling init_osst+0x0/0x14a @ 1
[ 6.689007] osst :I: Tape driver with OnStream support version 0.99.4
[ 6.689008] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 6.690007] device class 'onstream_tape': registering
[ 6.691272] bus: 'scsi': add driver osst
[ 6.692317] initcall init_osst+0x0/0x14a returned 0 after 2929 usecs
[ 6.693009] calling init_sd+0x0/0x161 @ 1
[ 6.694062] device class 'scsi_disk': registering
[ 6.695224] bus: 'scsi': add driver sd
[ 6.696446] initcall init_sd+0x0/0x161 returned 0 after 1953 usecs
[ 6.697010] calling init_sr+0x0/0x46 @ 1
[ 6.698010] bus: 'scsi': add driver sr
[ 6.700236] initcall init_sr+0x0/0x46 returned 0 after 1953 usecs
[ 6.701009] calling init_sg+0x0/0x125 @ 1
[ 6.702011] device class 'scsi_generic': registering
[ 6.703219] initcall init_sg+0x0/0x125 returned 0 after 976 usecs
[ 6.705055] calling init_ch_module+0x0/0xb7 @ 1
[ 6.706007] SCSI Media Changer driver v0.25
[ 6.707023] device class 'scsi_changer': registering
[ 6.709265] bus: 'scsi': add driver ch
[ 6.710223] initcall init_ch_module+0x0/0xb7 returned 0 after 3906 usecs
[ 6.711066] calling osd_uld_init+0x0/0xc6 @ 1
[ 6.712007] device class 'scsi_osd': registering
[ 6.713262] bus: 'scsi': add driver osd
[ 6.714339] osd: LOADED open-osd 0.2.0
[ 6.715014] initcall osd_uld_init+0x0/0xc6 returned 0 after 2929 usecs
[ 6.716007] calling ahci_init+0x0/0x1b @ 1
[ 6.717011] bus: 'pci': add driver ahci
[ 6.718333] initcall ahci_init+0x0/0x1b returned 0 after 976 usecs
[ 6.719050] calling k2_sata_init+0x0/0x1b @ 1
[ 6.720010] bus: 'pci': add driver sata_svw
[ 6.721261] initcall k2_sata_init+0x0/0x1b returned 0 after 976 usecs
[ 6.722065] calling piix_init+0x0/0x29 @ 1
[ 6.723016] bus: 'pci': add driver ata_piix
[ 6.724257] initcall piix_init+0x0/0x29 returned 0 after 976 usecs
[ 6.726008] calling qs_ata_init+0x0/0x1b @ 1
[ 6.727009] bus: 'pci': add driver sata_qstor
[ 6.729113] initcall qs_ata_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.730009] calling sil_init+0x0/0x1b @ 1
[ 6.731009] bus: 'pci': add driver sata_sil
[ 6.733281] initcall sil_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.734009] calling sil24_init+0x0/0x1b @ 1
[ 6.735014] bus: 'pci': add driver sata_sil24
[ 6.736250] initcall sil24_init+0x0/0x1b returned 0 after 976 usecs
[ 6.737099] calling svia_init+0x0/0x1b @ 1
[ 6.738010] bus: 'pci': add driver sata_via
[ 6.739253] initcall svia_init+0x0/0x1b returned 0 after 976 usecs
[ 6.740055] calling nv_init+0x0/0x1b @ 1
[ 6.741011] bus: 'pci': add driver sata_nv
[ 6.743238] initcall nv_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.744009] calling uli_init+0x0/0x1b @ 1
[ 6.745014] bus: 'pci': add driver sata_uli
[ 6.746259] initcall uli_init+0x0/0x1b returned 0 after 976 usecs
[ 6.747099] calling mv_init+0x0/0x45 @ 1
[ 6.748010] bus: 'pci': add driver sata_mv
[ 6.749252] bus: 'platform': add driver sata_mv
[ 6.750333] initcall mv_init+0x0/0x45 returned 0 after 1953 usecs
[ 6.751009] calling ali_init+0x0/0x4d @ 1
[ 6.752031] bus: 'pci': add driver pata_ali
[ 6.754215] initcall ali_init+0x0/0x4d returned 0 after 1953 usecs
[ 6.755054] calling amd_init+0x0/0x1b @ 1
[ 6.756010] bus: 'pci': add driver pata_amd
[ 6.757038] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[ 6.758009] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[ 6.759072] pata_amd 0000:00:06.0: version 0.4.1
[ 6.761119] pata_amd 0000:00:06.0: using 32bit DMA mask
[ 6.762012] pata_amd 0000:00:06.0: using 32bit consistent DMA mask
[ 6.763064] pata_amd 0000:00:06.0: setting latency timer to 64
[ 6.764394] scsi0 : pata_amd
[ 6.766486] device: 'host0': device_add
[ 6.767089] PM: Adding info for No Bus:host0
[ 6.768015] device: 'host0': device_add
[ 6.770041] PM: Adding info for No Bus:host0
[ 6.771270] scsi1 : pata_amd
[ 6.772062] device: 'host1': device_add
[ 6.773033] PM: Adding info for No Bus:host1
[ 6.774011] device: 'host1': device_add
[ 6.775093] PM: Adding info for No Bus:host1
[ 6.776270] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 6.777052] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 6.778043] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[ 6.778170] calling 1_async_port_probe+0x0/0xb6 @ 2046
[ 6.778435] calling 2_async_port_probe+0x0/0xb6 @ 2047
[ 6.778437] async_waiting @ 2047
[ 6.779013] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[ 6.781166] initcall amd_init+0x0/0x1b returned 0 after 24414 usecs
[ 6.782056] calling artop_init+0x0/0x1b @ 1
[ 6.783018] bus: 'pci': add driver pata_artop
[ 6.784261] initcall artop_init+0x0/0x1b returned 0 after 976 usecs
[ 6.785061] calling atiixp_init+0x0/0x1b @ 1
[ 6.786011] bus: 'pci': add driver pata_atiixp
[ 6.787256] initcall atiixp_init+0x0/0x1b returned 0 after 976 usecs
[ 6.788056] calling cmd640_init+0x0/0x1b @ 1
[ 6.789010] bus: 'pci': add driver pata_cmd640
[ 6.790262] initcall cmd640_init+0x0/0x1b returned 0 after 976 usecs
[ 6.791055] calling cmd64x_init+0x0/0x1b @ 1
[ 6.792011] bus: 'pci': add driver pata_cmd64x
[ 6.793255] initcall cmd64x_init+0x0/0x1b returned 0 after 976 usecs
[ 6.794055] calling cs5530_init+0x0/0x1b @ 1
[ 6.795015] bus: 'pci': add driver pata_cs5530
[ 6.796253] initcall cs5530_init+0x0/0x1b returned 0 after 976 usecs
[ 6.797055] calling efar_init+0x0/0x1b @ 1
[ 6.798011] bus: 'pci': add driver pata_efar
[ 6.799265] initcall efar_init+0x0/0x1b returned 0 after 976 usecs
[ 6.800056] calling hpt36x_init+0x0/0x1b @ 1
[ 6.801011] bus: 'pci': add driver pata_hpt366
[ 6.803100] initcall hpt36x_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.804009] calling hpt37x_init+0x0/0x1b @ 1
[ 6.805014] bus: 'pci': add driver pata_hpt37x
[ 6.806254] initcall hpt37x_init+0x0/0x1b returned 0 after 976 usecs
[ 6.807101] calling hpt3x2n_init+0x0/0x1b @ 1
[ 6.808011] bus: 'pci': add driver pata_hpt3x2n
[ 6.809255] initcall hpt3x2n_init+0x0/0x1b returned 0 after 976 usecs
[ 6.810055] calling hpt3x3_init+0x0/0x1b @ 1
[ 6.811011] bus: 'pci': add driver pata_hpt3x3
[ 6.813065] initcall hpt3x3_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.814009] calling jmicron_init+0x0/0x1b @ 1
[ 6.815014] bus: 'pci': add driver pata_jmicron
[ 6.816254] initcall jmicron_init+0x0/0x1b returned 0 after 976 usecs
[ 6.817099] calling netcell_init+0x0/0x1b @ 1
[ 6.818011] bus: 'pci': add driver pata_netcell
[ 6.819256] initcall netcell_init+0x0/0x1b returned 0 after 976 usecs
[ 6.820055] calling ns87410_init+0x0/0x1b @ 1
[ 6.821011] bus: 'pci': add driver pata_ns87410
[ 6.822254] initcall ns87410_init+0x0/0x1b returned 0 after 976 usecs
[ 6.823061] calling ns87415_init+0x0/0x1b @ 1
[ 6.824011] bus: 'pci': add driver pata_ns87415
[ 6.826174] initcall ns87415_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.827099] calling opti_init+0x0/0x1b @ 1
[ 6.828011] bus: 'pci': add driver pata_opti
[ 6.829254] initcall opti_init+0x0/0x1b returned 0 after 976 usecs
[ 6.830055] calling marvell_init+0x0/0x1b @ 1
[ 6.831011] bus: 'pci': add driver pata_marvell
[ 6.833243] initcall marvell_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.834009] calling mpiix_init+0x0/0x1b @ 1
[ 6.835014] bus: 'pci': add driver pata_mpiix
[ 6.836261] initcall mpiix_init+0x0/0x1b returned 0 after 976 usecs
[ 6.837101] calling oldpiix_init+0x0/0x1b @ 1
[ 6.838011] bus: 'pci': add driver pata_oldpiix
[ 6.839262] initcall oldpiix_init+0x0/0x1b returned 0 after 976 usecs
[ 6.840055] calling pdc2027x_init+0x0/0x1b @ 1
[ 6.841011] bus: 'pci': add driver pata_pdc2027x
[ 6.842261] initcall pdc2027x_init+0x0/0x1b returned 0 after 976 usecs
[ 6.843055] calling rdc_init+0x0/0x1b @ 1
[ 6.844011] bus: 'pci': add driver pata_rdc
[ 6.845257] initcall rdc_init+0x0/0x1b returned 0 after 976 usecs
[ 6.846055] calling rz1000_init+0x0/0x1b @ 1
[ 6.847011] bus: 'pci': add driver pata_rz1000
[ 6.848264] initcall rz1000_init+0x0/0x1b returned 0 after 976 usecs
[ 6.849055] calling sc1200_init+0x0/0x1b @ 1
[ 6.850011] bus: 'pci': add driver sc1200
[ 6.851255] initcall sc1200_init+0x0/0x1b returned 0 after 976 usecs
[ 6.852055] calling serverworks_init+0x0/0x1b @ 1
[ 6.853011] bus: 'pci': add driver pata_serverworks
[ 6.854255] initcall serverworks_init+0x0/0x1b returned 0 after 976 usecs
[ 6.855060] calling sil680_init+0x0/0x1b @ 1
[ 6.856011] bus: 'pci': add driver pata_sil680
[ 6.858238] initcall sil680_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.859099] calling ata_tosh_init+0x0/0x1b @ 1
[ 6.860011] bus: 'pci': add driver pata_piccolo
[ 6.862243] initcall ata_tosh_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.863009] calling via_init+0x0/0x1b @ 1
[ 6.864010] bus: 'pci': add driver pata_via
[ 6.865258] initcall via_init+0x0/0x1b returned 0 after 976 usecs
[ 6.866099] calling sis_init+0x0/0x1b @ 1
[ 6.867011] bus: 'pci': add driver pata_sis
[ 6.869250] initcall sis_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.870099] calling sch_init+0x0/0x1b @ 1
[ 6.871012] bus: 'pci': add driver pata_sch
[ 6.873229] initcall sch_init+0x0/0x1b returned 0 after 1953 usecs
[ 6.879082] calling ata_generic_init+0x0/0x1b @ 1
[ 6.884019] bus: 'pci': add driver ata_generic
[ 6.889177] initcall ata_generic_init+0x0/0x1b returned 0 after 4882 usecs
[ 6.896072] calling marvell_init+0x0/0x5b @ 1
[ 6.900009] bus: 'mdio_bus': add driver Marvell 88E1101
[ 6.906191] bus: 'mdio_bus': add driver Marvell 88E1112
[ 6.911618] bus: 'mdio_bus': add driver Marvell 88E1111
[ 6.917208] bus: 'mdio_bus': add driver Marvell 88E1118
[ 6.922802] bus: 'mdio_bus': add driver Marvell 88E1121R
[ 6.928507] bus: 'mdio_bus': add driver Marvell 88E1145
[ 6.934490] bus: 'mdio_bus': add driver Marvell 88E1240
[ 6.940452] initcall marvell_init+0x0/0x5b returned 0 after 39062 usecs
[ 6.947158] calling davicom_init+0x0/0x5e @ 1
[ 6.951008] bus: 'mdio_bus': add driver Davicom DM9161E
[ 6.957324] bus: 'mdio_bus': add driver Davicom DM9161A
[ 6.963264] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 6.963264] bus: 'mdio_bus': add driver Davicom DM9131
[ 6.963316] initcall davicom_init+0x0/0x5e returned 0 after 11718 usecs
[ 6.963320] calling qs6612_init+0x0/0x12 @ 1
[ 6.963323] bus: 'mdio_bus': add driver QS6612
[ 6.964077] initcall qs6612_init+0x0/0x12 returned 0 after 976 usecs
[ 6.964081] calling smsc_init+0x0/0xa6 @ 1
[ 6.964084] bus: 'mdio_bus': add driver SMSC LAN83C185
[ 6.964381] bus: 'mdio_bus': add driver SMSC LAN8187
[ 6.964645] bus: 'mdio_bus': add driver SMSC LAN8700
[ 6.964899] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[ 6.965187] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[ 6.965479] initcall smsc_init+0x0/0xa6 returned 0 after 976 usecs
[ 6.965482] calling broadcom_init+0x0/0x143 @ 1
[ 6.965486] bus: 'mdio_bus': add driver Broadcom BCM5411
[ 6.965744] bus: 'mdio_bus': add driver Broadcom BCM5421
[ 6.966010] bus: 'mdio_bus': add driver Broadcom BCM5461
[ 6.966288] bus: 'mdio_bus': add driver Broadcom BCM5464
[ 6.966580] bus: 'mdio_bus': add driver Broadcom BCM5481
[ 6.966831] bus: 'mdio_bus': add driver Broadcom BCM5482
[ 6.967120] bus: 'mdio_bus': add driver Broadcom BCM50610
[ 6.967382] bus: 'mdio_bus': add driver Broadcom BCM50610M
[ 6.967717] bus: 'mdio_bus': add driver Broadcom BCM57780
[ 6.967979] bus: 'mdio_bus': add driver Broadcom BCMAC131
[ 6.968298] initcall broadcom_init+0x0/0x143 returned 0 after 2929 usecs
[ 6.968302] calling ip175c_init+0x0/0x12 @ 1
[ 6.968306] bus: 'mdio_bus': add driver ICPlus IP175C
[ 6.968571] initcall ip175c_init+0x0/0x12 returned 0 after 0 usecs
[ 6.968575] calling realtek_init+0x0/0x12 @ 1
[ 6.968579] bus: 'mdio_bus': add driver RTL821x Gigabit Ethernet
[ 6.968871] initcall realtek_init+0x0/0x12 returned 0 after 0 usecs
[ 6.968875] calling et1011c_init+0x0/0x12 @ 1
[ 6.968878] bus: 'mdio_bus': add driver ET1011C
[ 6.969177] initcall et1011c_init+0x0/0x12 returned 0 after 976 usecs
[ 6.969181] calling ns_init+0x0/0x12 @ 1
[ 6.969184] bus: 'mdio_bus': add driver NatSemi DP83865
[ 6.969437] initcall ns_init+0x0/0x12 returned 0 after 0 usecs
[ 6.969441] calling e1000_init_module+0x0/0x87 @ 1
[ 6.969444] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 6.969446] Copyright (c) 1999-2006 Intel Corporation.
[ 6.969460] bus: 'pci': add driver e1000
[ 6.969791] initcall e1000_init_module+0x0/0x87 returned 0 after 0 usecs
[ 6.969794] calling e1000_init_module+0x0/0x4c @ 1
[ 6.969796] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 6.969799] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 6.969804] bus: 'pci': add driver e1000e
[ 6.970155] initcall e1000_init_module+0x0/0x4c returned 0 after 976 usecs
[ 6.970159] calling igbvf_init_module+0x0/0x6b @ 1
[ 6.970161] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 6.970163] Copyright (c) 2009 Intel Corporation.
[ 6.970168] bus: 'pci': add driver igbvf
[ 6.970519] initcall igbvf_init_module+0x0/0x6b returned 0 after 0 usecs
[ 6.970523] calling ixgbe_init_module+0x0/0x5a @ 1
[ 6.970525] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2
[ 6.970528] ixgbe: Copyright (c) 1999-2010 Intel Corporation.
[ 6.970533] bus: 'pci': add driver ixgbe
[ 6.970834] initcall ixgbe_init_module+0x0/0x5a returned 0 after 0 usecs
[ 6.970838] calling ipg_init_module+0x0/0x1b @ 1
[ 6.970843] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[ 6.971190] initcall ipg_init_module+0x0/0x1b returned 0 after 976 usecs
[ 6.971194] calling cxgb3_init_module+0x0/0x20 @ 1
[ 6.971201] bus: 'pci': add driver cxgb3
[ 6.971534] initcall cxgb3_init_module+0x0/0x20 returned 0 after 0 usecs
[ 6.971538] calling bonding_init+0x0/0xbc @ 1
[ 6.971540] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
[ 6.971544] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 6.971947] device: 'bond0': device_add
[ 6.972296] PM: Adding info for No Bus:bond0
[ 6.972733] initcall bonding_init+0x0/0xbc returned 0 after 976 usecs
[ 6.972737] calling atl1_init_module+0x0/0x1b @ 1
[ 6.972750] bus: 'pci': add driver atl1
[ 6.973110] initcall atl1_init_module+0x0/0x1b returned 0 after 976 usecs
[ 6.973114] calling atl2_init_module+0x0/0x4c @ 1
[ 6.973116] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 6.973118] Copyright (c) 2007 Atheros Corporation.
[ 6.973124] bus: 'pci': add driver atl2
[ 6.973474] initcall atl2_init_module+0x0/0x4c returned 0 after 0 usecs
[ 6.973478] calling atl1e_init_module+0x0/0x1b @ 1
[ 6.973483] bus: 'pci': add driver ATL1E
[ 6.973797] initcall atl1e_init_module+0x0/0x1b returned 0 after 0 usecs
[ 6.973801] calling atl1c_init_module+0x0/0x1b @ 1
[ 6.973806] bus: 'pci': add driver atl1c
[ 7.039170] initcall atl1c_init_module+0x0/0x1b returned 0 after 64453 usecs
[ 7.039174] calling bdx_module_init+0x0/0x88 @ 1
[ 7.039176] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[ 7.039179] tehuti: Options: hw_csum
[ 7.039185] bus: 'pci': add driver tehuti
[ 7.039489] initcall bdx_module_init+0x0/0x88 returned 0 after 0 usecs
[ 7.039492] calling enic_init_module+0x0/0x37 @ 1
[ 7.039494] enic: Cisco 10G Ethernet Driver, ver 1.1.0.100
[ 7.039500] bus: 'pci': add driver enic
[ 7.039845] initcall enic_init_module+0x0/0x37 returned 0 after 0 usecs
[ 7.039849] calling plip_init+0x0/0x5d @ 1
[ 7.039875] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
[ 7.039986] device: 'plip0': device_add
[ 7.040240] PM: Adding info for No Bus:plip0
[ 7.040628] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[ 7.040631] plip0: Parallel port at 0x378, not using IRQ.
[ 7.040637] initcall plip_init+0x0/0x5d returned 0 after 976 usecs
[ 7.040640] calling happy_meal_probe+0x0/0x1b @ 1
[ 7.040651] bus: 'pci': add driver hme
[ 7.041011] initcall happy_meal_probe+0x0/0x1b returned 0 after 976 usecs
[ 7.041015] calling gem_init+0x0/0x1b @ 1
[ 7.041020] bus: 'pci': add driver gem
[ 7.041322] initcall gem_init+0x0/0x1b returned 0 after 0 usecs
[ 7.041326] calling cas_init+0x0/0x3d @ 1
[ 7.041331] bus: 'pci': add driver cassini
[ 7.041689] initcall cas_init+0x0/0x3d returned 0 after 0 usecs
[ 7.041692] calling vortex_init+0x0/0xac @ 1
[ 7.041698] bus: 'pci': add driver 3c59x
[ 7.042025] initcall vortex_init+0x0/0xac returned 0 after 976 usecs
[ 7.042028] calling pcnet32_init_module+0x0/0x12c @ 1
[ 7.042030] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 7.042036] bus: 'pci': add driver pcnet32
[ 7.103144] initcall pcnet32_init_module+0x0/0x12c returned 0 after 59570 usecs
[ 7.103148] calling e100_init_module+0x0/0x5d @ 1
[ 7.103150] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.103152] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.103159] bus: 'pci': add driver e100
[ 7.103458] initcall e100_init_module+0x0/0x5d returned 0 after 0 usecs
[ 7.103461] calling tlan_probe+0x0/0xe4 @ 1
[ 7.103463] ThunderLAN driver v1.15a
[ 7.103468] bus: 'pci': add driver tlan
[ 7.103812] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 7.103844] bus: 'pci': remove driver tlan
[ 7.104171] driver: 'tlan': driver_release
[ 7.104181] initcall tlan_probe+0x0/0xe4 returned -19 after 976 usecs
[ 7.104185] calling epic_init+0x0/0x1b @ 1
[ 7.104191] bus: 'pci': add driver epic100
[ 7.104493] initcall epic_init+0x0/0x1b returned 0 after 0 usecs
[ 7.104497] calling sis190_init_module+0x0/0x1b @ 1
[ 7.104503] bus: 'pci': add driver sis190
[ 7.104804] initcall sis190_init_module+0x0/0x1b returned 0 after 0 usecs
[ 7.104807] calling r6040_init+0x0/0x1b @ 1
[ 7.104813] bus: 'pci': add driver r6040
[ 7.105186] initcall r6040_init+0x0/0x1b returned 0 after 976 usecs
[ 7.105190] calling yellowfin_init+0x0/0x1b @ 1
[ 7.105196] bus: 'pci': add driver yellowfin
[ 7.105511] initcall yellowfin_init+0x0/0x1b returned 0 after 0 usecs
[ 7.105515] calling acenic_init+0x0/0x1b @ 1
[ 7.105521] bus: 'pci': add driver acenic
[ 7.167155] initcall acenic_init+0x0/0x1b returned 0 after 60546 usecs
[ 7.167159] calling fealnx_init+0x0/0x1b @ 1
[ 7.167166] bus: 'pci': add driver fealnx
[ 7.167446] initcall fealnx_init+0x0/0x1b returned 0 after 0 usecs
[ 7.167449] calling tg3_init+0x0/0x1b @ 1
[ 7.167455] bus: 'pci': add driver tg3
[ 7.167817] initcall tg3_init+0x0/0x1b returned 0 after 0 usecs
[ 7.167821] calling bnx2_init+0x0/0x1b @ 1
[ 7.167826] bus: 'pci': add driver bnx2
[ 7.168222] initcall bnx2_init+0x0/0x1b returned 0 after 976 usecs
[ 7.168226] calling cnic_init+0x0/0x3a @ 1
[ 7.168228] Broadcom NetXtreme II CNIC Driver cnic v2.1.0 (Oct 10, 2009)
[ 7.168298] initcall cnic_init+0x0/0x3a returned 0 after 0 usecs
[ 7.168301] calling bnx2x_init+0x0/0x97 @ 1
[ 7.168303] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.1-5 (2009/11/09)
[ 7.168436] bus: 'pci': add driver bnx2x
[ 7.168749] initcall bnx2x_init+0x0/0x97 returned 0 after 0 usecs
[ 7.168753] calling skge_init_module+0x0/0x59 @ 1
[ 7.168790] bus: 'pci': add driver skge
[ 7.169191] initcall skge_init_module+0x0/0x59 returned 0 after 976 usecs
[ 7.169195] calling sky2_init_module+0x0/0x29 @ 1
[ 7.169197] sky2 driver version 1.26
[ 7.169203] bus: 'pci': add driver sky2
[ 7.169518] initcall sky2_init_module+0x0/0x29 returned 0 after 0 usecs
[ 7.169522] calling skfd_init+0x0/0x1b @ 1
[ 7.169528] bus: 'pci': add driver skfddi
[ 7.231146] initcall skfd_init+0x0/0x1b returned 0 after 60546 usecs
[ 7.231150] calling ks8842_init+0x0/0x12 @ 1
[ 7.231156] bus: 'platform': add driver ks8842
[ 7.231415] initcall ks8842_init+0x0/0x12 returned 0 after 0 usecs
[ 7.231418] calling ks8851_init+0x0/0x12 @ 1
[ 7.231422] bus: 'platform': add driver ks8851_mll
[ 7.231737] initcall ks8851_init+0x0/0x12 returned 0 after 0 usecs
[ 7.231740] calling rhine_init+0x0/0x63 @ 1
[ 7.231750] bus: 'pci': add driver via-rhine
[ 7.232132] initcall rhine_init+0x0/0x63 returned 0 after 976 usecs
[ 7.232136] calling velocity_init_module+0x0/0x42 @ 1
[ 7.232143] bus: 'pci': add driver via-velocity
[ 7.232452] initcall velocity_init_module+0x0/0x42 returned 0 after 0 usecs
[ 7.232456] calling starfire_init+0x0/0x1b @ 1
[ 7.232462] bus: 'pci': add driver starfire
[ 7.232773] initcall starfire_init+0x0/0x1b returned 0 after 0 usecs
[ 7.232776] calling sundance_init+0x0/0x1b @ 1
[ 7.232782] bus: 'pci': add driver sundance
[ 7.233154] initcall sundance_init+0x0/0x1b returned 0 after 976 usecs
[ 7.233158] calling hamachi_init+0x0/0x1b @ 1
[ 7.233164] bus: 'pci': add driver hamachi
[ 7.233473] initcall hamachi_init+0x0/0x1b returned 0 after 0 usecs
[ 7.233476] calling net_olddevs_init+0x0/0x1f @ 1
[ 7.233485] initcall net_olddevs_init+0x0/0x1f returned 0 after 0 usecs
[ 7.233488] calling hp100_module_init+0x0/0x1b @ 1
[ 7.233494] bus: 'pci': add driver hp100
[ 7.295148] initcall hp100_module_init+0x0/0x1b returned 0 after 60546 usecs
[ 7.295152] calling init_nic+0x0/0x1b @ 1
[ 7.295159] bus: 'pci': add driver forcedeth
[ 7.295192] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[ 7.295197] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[ 7.295215] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 7.295304] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 7.295311] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 7.295324] forcedeth 0000:00:0a.0: using 39bit DMA mask
[ 7.295327] forcedeth 0000:00:0a.0: using 39bit consistent DMA mask
[ 7.295401] nv_probe: set workaround bit for reversed mac addr
[ 7.807226] device: 'eth0': device_add
[ 7.807436] PM: Adding info for No Bus:eth0
[ 7.807884] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[ 7.807888] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 7.807891] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[ 7.807897] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[ 7.808337] initcall init_nic+0x0/0x1b returned 0 after 500976 usecs
[ 7.808342] calling ql3xxx_init_module+0x0/0x1b @ 1
[ 7.808357] bus: 'pci': add driver qla3xxx
[ 7.808651] initcall ql3xxx_init_module+0x0/0x1b returned 0 after 0 usecs
[ 7.808655] calling qlge_init_module+0x0/0x1b @ 1
[ 7.808661] bus: 'pci': add driver qlge
[ 7.808965] initcall qlge_init_module+0x0/0x1b returned 0 after 0 usecs
[ 7.808969] calling ppp_init+0x0/0xe3 @ 1
[ 7.808970] PPP generic driver version 2.4.2
[ 7.809012] device class 'ppp': registering
[ 7.809310] device: 'ppp': device_add
[ 7.809575] PM: Adding info for No Bus:ppp
[ 7.809983] initcall ppp_init+0x0/0xe3 returned 0 after 976 usecs
[ 7.809987] calling ppp_sync_init+0x0/0x36 @ 1
[ 7.809992] initcall ppp_sync_init+0x0/0x36 returned 0 after 0 usecs
[ 7.810014] calling deflate_init+0x0/0x3b @ 1
[ 7.810031] PPP Deflate Compression module registered
[ 7.810036] initcall deflate_init+0x0/0x3b returned 0 after 0 usecs
[ 7.810040] calling bsdcomp_init+0x0/0x2f @ 1
[ 7.810043] PPP BSD Compression module registered
[ 7.810046] initcall bsdcomp_init+0x0/0x2f returned 0 after 0 usecs
[ 7.810050] calling ppp_mppe_init+0x0/0xe5 @ 1
[ 7.810476] PPP MPPE Compression module registered
[ 7.810481] initcall ppp_mppe_init+0x0/0xe5 returned 0 after 0 usecs
[ 7.810485] calling pppox_init+0x0/0x12 @ 1
[ 7.810488] NET: Registered protocol family 24
[ 7.810491] initcall pppox_init+0x0/0x12 returned 0 after 0 usecs
[ 7.810495] calling pppoe_init+0x0/0x87 @ 1
[ 7.810535] initcall pppoe_init+0x0/0x87 returned 0 after 0 usecs
[ 7.810538] calling pppol2tp_init+0x0/0x79 @ 1
[ 7.810558] PPPoL2TP kernel driver, V1.0
[ 7.810561] initcall pppol2tp_init+0x0/0x79 returned 0 after 0 usecs
[ 7.810565] calling slip_init+0x0/0xb3 @ 1
[ 7.810567] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 7.810569] SLIP linefill/keepalive option.
[ 7.810582] initcall slip_init+0x0/0xb3 returned 0 after 0 usecs
[ 7.810586] calling dummy_init_module+0x0/0xb7 @ 1
[ 7.810668] device: 'dummy0': device_add
[ 7.810846] PM: Adding info for No Bus:dummy0
[ 7.935274] initcall dummy_init_module+0x0/0xb7 returned 0 after 122070 usecs
[ 7.935278] calling ifb_init_module+0x0/0xb7 @ 1
[ 7.935333] device: 'ifb0': device_add
[ 7.935504] PM: Adding info for No Bus:ifb0
[ 7.935961] device: 'ifb1': device_add
[ 7.936215] PM: Adding info for No Bus:ifb1
[ 7.936579] initcall ifb_init_module+0x0/0xb7 returned 0 after 976 usecs
[ 7.936583] calling macvlan_init_module+0x0/0x53 @ 1
[ 7.936591] initcall macvlan_init_module+0x0/0x53 returned 0 after 0 usecs
[ 7.936596] calling dfx_init+0x0/0x1b @ 1
[ 7.936614] bus: 'pci': add driver defxx
[ 7.936966] initcall dfx_init+0x0/0x1b returned 0 after 0 usecs
[ 7.936970] calling cp_init+0x0/0x1b @ 1
[ 7.936976] bus: 'pci': add driver 8139cp
[ 7.937035] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139cp
[ 7.937041] bus: 'pci': really_probe: probing driver 8139cp with device 0000:05:07.0
[ 7.937058] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 7.937061] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 7.937351] initcall cp_init+0x0/0x1b returned 0 after 976 usecs
[ 7.937355] calling rtl8139_init_module+0x0/0x1b @ 1
[ 7.937361] bus: 'pci': add driver 8139too
[ 7.937402] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[ 7.937406] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[ 7.937419] 8139too Fast Ethernet driver 0.9.28
[ 7.937461] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 7.937975] device: 'eth1': device_add
[ 7.938311] PM: Adding info for No Bus:eth1
[ 7.938734] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
[ 7.938738] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[ 7.938743] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[ 7.939035] initcall rtl8139_init_module+0x0/0x1b returned 0 after 1953 usecs
[ 7.939039] calling sc92031_init+0x0/0x1b @ 1
[ 7.939050] bus: 'pci': add driver sc92031
[ 7.939370] initcall sc92031_init+0x0/0x1b returned 0 after 0 usecs
[ 7.939373] calling eql_init_module+0x0/0x64 @ 1
[ 7.939376] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 7.939416] device: 'eql': device_add
[ 7.939596] PM: Adding info for No Bus:eql
[ 7.999243] initcall eql_init_module+0x0/0x64 returned 0 after 58593 usecs
[ 7.999247] calling veth_init+0x0/0x12 @ 1
[ 7.999252] initcall veth_init+0x0/0x12 returned 0 after 0 usecs
[ 7.999255] calling rio_init+0x0/0x1b @ 1
[ 7.999265] bus: 'pci': add driver dl2k
[ 7.999620] initcall rio_init+0x0/0x1b returned 0 after 0 usecs
[ 7.999624] calling rtl8169_init_module+0x0/0x1b @ 1
[ 7.999630] bus: 'pci': add driver r8169
[ 7.999938] initcall rtl8169_init_module+0x0/0x1b returned 0 after 0 usecs
[ 7.999942] calling amd8111e_init+0x0/0x1b @ 1
[ 7.999948] bus: 'pci': add driver amd8111e
[ 8.000321] initcall amd8111e_init+0x0/0x1b returned 0 after 976 usecs
[ 8.000325] calling s2io_starter+0x0/0x1b @ 1
[ 8.000332] bus: 'pci': add driver S2IO
[ 8.000635] initcall s2io_starter+0x0/0x1b returned 0 after 0 usecs
[ 8.000638] calling mlx4_init+0x0/0xa2 @ 1
[ 8.000795] bus: 'pci': add driver mlx4_core
[ 8.001144] initcall mlx4_init+0x0/0xa2 returned 0 after 976 usecs
[ 8.001148] calling mlx4_en_init+0x0/0x12 @ 1
[ 8.001206] initcall mlx4_en_init+0x0/0x12 returned 0 after 0 usecs
[ 8.001209] calling ethoc_init+0x0/0x12 @ 1
[ 8.001215] bus: 'platform': add driver ethoc
[ 8.001494] initcall ethoc_init+0x0/0x12 returned 0 after 0 usecs
[ 8.001497] calling dnet_init+0x0/0x12 @ 1
[ 8.001501] bus: 'platform': add driver dnet
[ 8.063164] initcall dnet_init+0x0/0x12 returned 0 after 60546 usecs
[ 8.063168] calling arcnet_init+0x0/0x5d @ 1
[ 8.063170] arcnet loaded.
[ 8.063174] initcall arcnet_init+0x0/0x5d returned 0 after 0 usecs
[ 8.063177] calling arcnet_rfc1201_init+0x0/0x73 @ 1
[ 8.063179] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 8.063183] initcall arcnet_rfc1201_init+0x0/0x73 returned 0 after 0 usecs
[ 8.063186] calling arcnet_rfc1051_init+0x0/0x47 @ 1
[ 8.063188] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[ 8.063192] initcall arcnet_rfc1051_init+0x0/0x47 returned 0 after 0 usecs
[ 8.063195] calling arcnet_raw_init+0x0/0x5e @ 1
[ 8.063197] arcnet: raw mode (`r') encapsulation support loaded.
[ 8.063201] initcall arcnet_raw_init+0x0/0x5e returned 0 after 0 usecs
[ 8.063205] calling com90xx_init+0x0/0x2a @ 1
[ 8.063222] arcnet: COM90xx chipset support
[ 8.364381] S3: No ARCnet cards found.
[ 8.364404] initcall com90xx_init+0x0/0x2a returned -5 after 293945 usecs
[ 8.364409] initcall com90xx_init+0x0/0x2a returned with error code -5
[ 8.364412] calling com90io_init+0x0/0x6b @ 1
[ 8.364458] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[ 8.364461] E-mail me if you actually test this driver, please!
[ 8.364463] arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[ 8.364496] initcall com90io_init+0x0/0x6b returned -19 after 0 usecs
[ 8.364499] calling arc_rimi_init+0x0/0x83 @ 1
[ 8.364541] arcnet: RIM I (entirely mem-mapped) support
[ 8.364543] E-mail me if you actually test the RIM I driver, please!
[ 8.364545] arc%d: Given: node 00h, shmem 0h, irq 0
[ 8.364547] arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
[ 8.364579] initcall arc_rimi_init+0x0/0x83 returned -5 after 0 usecs
[ 8.364583] initcall arc_rimi_init+0x0/0x83 returned with error code -5
[ 8.364587] calling init_tc574+0x0/0x12 @ 1
[ 8.364592] bus: 'pcmcia': add driver 3c574_cs
[ 8.364910] initcall init_tc574+0x0/0x12 returned 0 after 0 usecs
[ 8.364914] calling init_fmvj18x_cs+0x0/0x12 @ 1
[ 8.364923] bus: 'pcmcia': add driver fmvj18x_cs
[ 8.365219] initcall init_fmvj18x_cs+0x0/0x12 returned 0 after 976 usecs
[ 8.365223] calling init_nmclan_cs+0x0/0x12 @ 1
[ 8.365228] bus: 'pcmcia': add driver nmclan_cs
[ 8.365505] initcall init_nmclan_cs+0x0/0x12 returned 0 after 0 usecs
[ 8.365509] calling init_smc91c92_cs+0x0/0x12 @ 1
[ 8.365518] bus: 'pcmcia': add driver smc91c92_cs
[ 8.365782] initcall init_smc91c92_cs+0x0/0x12 returned 0 after 0 usecs
[ 8.365786] calling init_xirc2ps_cs+0x0/0x12 @ 1
[ 8.365793] bus: 'pcmcia': add driver xirc2ps_cs
[ 8.366117] initcall init_xirc2ps_cs+0x0/0x12 returned 0 after 976 usecs
[ 8.366121] calling init_axnet_cs+0x0/0x12 @ 1
[ 8.366129] bus: 'pcmcia': add driver axnet_cs
[ 8.366415] initcall init_axnet_cs+0x0/0x12 returned 0 after 0 usecs
[ 8.366419] calling kaweth_init+0x0/0x1b @ 1
[ 8.366424] bus: 'usb': add driver kaweth
[ 8.383142] usbcore: registered new interface driver kaweth
[ 8.383147] initcall kaweth_init+0x0/0x1b returned 0 after 16601 usecs
[ 8.383151] calling pegasus_init+0x0/0x48 @ 1
[ 8.383153] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 8.383157] bus: 'usb': add driver pegasus
[ 8.383408] usbcore: registered new interface driver pegasus
[ 8.383412] initcall pegasus_init+0x0/0x48 returned 0 after 0 usecs
[ 8.383416] calling usb_rtl8150_init+0x0/0x29 @ 1
[ 8.383418] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 8.383422] bus: 'usb': add driver rtl8150
[ 8.383725] usbcore: registered new interface driver rtl8150
[ 8.383729] initcall usb_rtl8150_init+0x0/0x29 returned 0 after 0 usecs
[ 8.383733] calling cdc_init+0x0/0x1b @ 1
[ 8.383736] bus: 'usb': add driver cdc_ether
[ 8.384083] usbcore: registered new interface driver cdc_ether
[ 8.384087] initcall cdc_init+0x0/0x1b returned 0 after 976 usecs
[ 8.384091] calling dm9601_init+0x0/0x1b @ 1
[ 8.384095] bus: 'usb': add driver dm9601
[ 8.384374] usbcore: registered new interface driver dm9601
[ 8.384379] initcall dm9601_init+0x0/0x1b returned 0 after 0 usecs
[ 8.384382] calling smsc95xx_init+0x0/0x1b @ 1
[ 8.384386] bus: 'usb': add driver smsc95xx
[ 8.384661] usbcore: registered new interface driver smsc95xx
[ 8.384666] initcall smsc95xx_init+0x0/0x1b returned 0 after 0 usecs
[ 8.384669] calling usbnet_init+0x0/0x1b @ 1
[ 8.384673] bus: 'usb': add driver gl620a
[ 8.384986] usbcore: registered new interface driver gl620a
[ 8.384990] initcall usbnet_init+0x0/0x1b returned 0 after 0 usecs
[ 8.384994] calling net1080_init+0x0/0x1b @ 1
[ 8.385014] bus: 'usb': add driver net1080
[ 8.385286] usbcore: registered new interface driver net1080
[ 8.385290] initcall net1080_init+0x0/0x1b returned 0 after 0 usecs
[ 8.385294] calling plusb_init+0x0/0x1b @ 1
[ 8.385298] bus: 'usb': add driver plusb
[ 8.447141] usbcore: registered new interface driver plusb
[ 8.447145] initcall plusb_init+0x0/0x1b returned 0 after 60546 usecs
[ 8.447149] calling zaurus_init+0x0/0x1b @ 1
[ 8.447153] bus: 'usb': add driver zaurus
[ 8.447394] usbcore: registered new interface driver zaurus
[ 8.447398] initcall zaurus_init+0x0/0x1b returned 0 after 0 usecs
[ 8.447402] calling mcs7830_init+0x0/0x1b @ 1
[ 8.447406] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[ 8.447722] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 8.447727] initcall mcs7830_init+0x0/0x1b returned 0 after 0 usecs
[ 8.447731] calling usbnet_init+0x0/0x2b @ 1
[ 8.447744] initcall usbnet_init+0x0/0x2b returned 0 after 0 usecs
[ 8.447747] calling usbpn_init+0x0/0x1b @ 1
[ 8.447751] bus: 'usb': add driver cdc_phonet
[ 8.448084] usbcore: registered new interface driver cdc_phonet
[ 8.448089] initcall usbpn_init+0x0/0x1b returned 0 after 976 usecs
[ 8.448093] calling xircom_init+0x0/0x1b @ 1
[ 8.448112] bus: 'pci': add driver xircom_cb
[ 8.448467] initcall xircom_init+0x0/0x1b returned 0 after 0 usecs
[ 8.448470] calling dmfe_init_module+0x0/0xea @ 1
[ 8.448472] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[ 8.448479] bus: 'pci': add driver dmfe
[ 8.448813] initcall dmfe_init_module+0x0/0xea returned 0 after 0 usecs
[ 8.448817] calling w840_init+0x0/0x29 @ 1
[ 8.448819] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
[ 8.448821] http://www.scyld.com/network/drivers.html
[ 8.448827] bus: 'pci': add driver winbond-840
[ 8.449202] initcall w840_init+0x0/0x29 returned 0 after 976 usecs
[ 8.449205] calling de_init+0x0/0x1b @ 1
[ 8.449211] bus: 'pci': add driver de2104x
[ 8.449521] initcall de_init+0x0/0x1b returned 0 after 0 usecs
[ 8.449524] calling de4x5_module_init+0x0/0x1b @ 1
[ 8.449531] bus: 'pci': add driver de4x5
[ 8.511146] initcall de4x5_module_init+0x0/0x1b returned 0 after 60546 usecs
[ 8.511150] calling uli526x_init_module+0x0/0x9e @ 1
[ 8.511152] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 8.511160] bus: 'pci': add driver uli526x
[ 8.511469] initcall uli526x_init_module+0x0/0x9e returned 0 after 0 usecs
[ 8.511473] calling init_netconsole+0x0/0x10a @ 1
[ 9.283947] console [netcon0] enabled
[ 9.283108] ata1.00: 488397168 sectors, multi 1: LBA48
[ 9.283108] ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 9.284074] netconsole: network logging started
[ 9.285013] initcall init_netconsole+0x0/0x10a returned 0 after 755859 usecs
[ 9.286008] calling niu_init+0x0/0x3d @ 1
[ 9.287065] bus: 'pci': add driver niu
[ 9.288276] initcall niu_init+0x0/0x3d returned 0 after 976 usecs
[ 9.289159] calling efx_init_module+0x0/0xd5 @ 1
[ 9.290007] Solarflare NET driver v3.0
[ 9.291280] bus: 'pci': add driver sfc
[ 9.293565] ata1.00: configured for UDMA/100
[ 9.297472] initcall efx_init_module+0x0/0xd5 returned 0 after 6835 usecs
[ 9.297477] calling zatm_init_module+0x0/0x1b @ 1
[ 9.297499] bus: 'pci': add driver zatm
[ 9.297855] initcall zatm_init_module+0x0/0x1b returned 0 after 0 usecs
[ 9.297859] calling uPD98402_module_init+0x0/0x8 @ 1
[ 9.297863] initcall uPD98402_module_init+0x0/0x8 returned 0 after 0 usecs
[ 9.297867] calling amb_module_init+0x0/0x58 @ 1
[ 9.297870] Madge ATM Ambassador driver version 1.2.4
[ 9.297872] amb: debug bitmap is 0
[ 9.297878] bus: 'pci': add driver amb
[ 9.298251] initcall amb_module_init+0x0/0x58 returned 0 after 976 usecs
[ 9.298255] calling hrz_module_init+0x0/0xc7 @ 1
[ 9.298257] Madge ATM Horizon [Ultra] driver version 1.2.1
[ 9.298263] bus: 'pci': add driver horizon
[ 9.347154] initcall hrz_module_init+0x0/0xc7 returned 0 after 47851 usecs
[ 9.347158] calling fore200e_module_init+0x0/0x29 @ 1
[ 9.347160] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[ 9.347168] bus: 'pci': add driver fore_200e
[ 9.347459] initcall fore200e_module_init+0x0/0x29 returned 0 after 0 usecs
[ 9.347463] calling eni_init+0x0/0x1b @ 1
[ 9.347469] bus: 'pci': add driver eni
[ 9.347781] initcall eni_init+0x0/0x1b returned 0 after 0 usecs
[ 9.347784] calling idt77252_init+0x0/0x37 @ 1
[ 9.347787] idt77252_init: at ffffffff82a8775d
[ 9.347793] bus: 'pci': add driver idt77252
[ 9.348157] initcall idt77252_init+0x0/0x37 returned 0 after 976 usecs
[ 9.348162] calling firestream_init_module+0x0/0x1b @ 1
[ 9.348169] bus: 'pci': add driver firestream
[ 9.348487] initcall firestream_init_module+0x0/0x1b returned 0 after 0 usecs
[ 9.348491] calling he_init+0x0/0x1b @ 1
[ 9.348497] bus: 'pci': add driver he
[ 9.348803] initcall he_init+0x0/0x1b returned 0 after 0 usecs
[ 9.348806] calling fw_core_init+0x0/0x90 @ 1
[ 9.349138] bus: 'firewire': registered
[ 9.349219] initcall fw_core_init+0x0/0x90 returned 0 after 976 usecs
[ 9.349223] calling sbp2_init+0x0/0x45 @ 1
[ 9.349343] bus: 'firewire': add driver sbp2
[ 9.411157] initcall sbp2_init+0x0/0x45 returned 0 after 60546 usecs
[ 9.411161] calling fwnet_init+0x0/0x74 @ 1
[ 9.411554] bus: 'firewire': add driver net
[ 9.411822] initcall fwnet_init+0x0/0x74 returned 0 after 0 usecs
[ 9.411826] calling uio_init+0x0/0x8 @ 1
[ 9.411830] initcall uio_init+0x0/0x8 returned 0 after 0 usecs
[ 9.411834] calling uio_pdrv_genirq_init+0x0/0x12 @ 1
[ 9.411840] bus: 'platform': add driver uio_pdrv_genirq
[ 9.412193] initcall uio_pdrv_genirq_init+0x0/0x12 returned 0 after 976 usecs
[ 9.412197] calling smx_ce_init_module+0x0/0x12 @ 1
[ 9.412201] bus: 'platform': add driver smx-ce
[ 9.412507] initcall smx_ce_init_module+0x0/0x12 returned 0 after 0 usecs
[ 9.412511] calling aectc_init+0x0/0x1b @ 1
[ 9.412528] bus: 'pci': add driver aectc
[ 9.412864] initcall aectc_init+0x0/0x1b returned 0 after 0 usecs
[ 9.412868] calling sercos3_init_module+0x0/0x1b @ 1
[ 9.412875] bus: 'pci': add driver sercos3
[ 9.413191] initcall sercos3_init_module+0x0/0x1b returned 0 after 976 usecs
[ 9.413196] calling init+0x0/0x29 @ 1
[ 9.413197] Generic UIO driver for PCI 2.3 devices version: 0.01.0
[ 9.413204] bus: 'pci': add driver uio_pci_generic
[ 9.413516] initcall init+0x0/0x29 returned 0 after 0 usecs
[ 9.413520] calling cdrom_init+0x0/0xd @ 1
[ 9.413534] initcall cdrom_init+0x0/0xd returned 0 after 0 usecs
[ 9.413538] calling ks0108_init+0x0/0xb9 @ 1
[ 9.413554] parport0: cannot grant exclusive access for device ks0108
[ 9.413562] ks0108: ERROR: parport didn't register new device
[ 9.413566] initcall ks0108_init+0x0/0xb9 returned -22 after 0 usecs
[ 9.413570] initcall ks0108_init+0x0/0xb9 returned with error code -22
[ 9.413574] calling nonstatic_sysfs_init+0x0/0x12 @ 1
[ 9.413582] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 0 usecs
[ 9.413587] calling i82092aa_module_init+0x0/0x1b @ 1
[ 9.413594] bus: 'pci': add driver i82092aa
[ 9.475154] initcall i82092aa_module_init+0x0/0x1b returned 0 after 60546 usecs
[ 9.475158] calling aoe_init+0x0/0xac @ 1
[ 9.475172] device class 'aoe': registering
[ 9.475426] device: 'err': device_add
[ 9.475688] PM: Adding info for No Bus:err
[ 9.476088] device: 'discover': device_add
[ 9.476309] PM: Adding info for No Bus:discover
[ 9.476688] device: 'interfaces': device_add
[ 9.476891] PM: Adding info for No Bus:interfaces
[ 9.477271] device: 'revalidate': device_add
[ 9.477470] PM: Adding info for No Bus:revalidate
[ 9.477760] device: 'flush': device_add
[ 9.477964] PM: Adding info for No Bus:flush
[ 9.478697] aoe: AoE v47 initialised.
[ 9.478947] initcall aoe_init+0x0/0xac returned 0 after 2929 usecs
[ 9.478951] calling uwb_subsys_init+0x0/0x51 @ 1
[ 9.478966] device class 'uwb_rc': registering
[ 9.539178] initcall uwb_subsys_init+0x0/0x51 returned 0 after 59570 usecs
[ 9.539182] calling umc_bus_init+0x0/0x12 @ 1
[ 9.539445] bus: 'umc': registered
[ 9.539449] initcall umc_bus_init+0x0/0x12 returned 0 after 0 usecs
[ 9.539453] calling whci_init+0x0/0x1b @ 1
[ 9.539473] bus: 'pci': add driver whci
[ 9.539828] initcall whci_init+0x0/0x1b returned 0 after 0 usecs
[ 9.539832] calling whcrc_driver_init+0x0/0x1b @ 1
[ 9.539835] bus: 'umc': add driver whc-rc
[ 9.540147] initcall whcrc_driver_init+0x0/0x1b returned 0 after 976 usecs
[ 9.540152] calling hwarc_driver_init+0x0/0x1b @ 1
[ 9.540158] bus: 'usb': add driver hwa-rc
[ 9.540467] usbcore: registered new interface driver hwa-rc
[ 9.540472] initcall hwarc_driver_init+0x0/0x1b returned 0 after 0 usecs
[ 9.540476] calling i1480_dfu_driver_init+0x0/0x1b @ 1
[ 9.540480] bus: 'usb': add driver i1480-dfu-usb
[ 9.540744] usbcore: registered new interface driver i1480-dfu-usb
[ 9.540749] initcall i1480_dfu_driver_init+0x0/0x1b returned 0 after 0 usecs
[ 9.540755] calling i1480_est_init+0x0/0x81 @ 1
[ 9.540773] initcall i1480_est_init+0x0/0x81 returned 0 after 0 usecs
[ 9.540777] calling mon_init+0x0/0x116 @ 1
[ 9.540805] device class 'usbmon': registering
[ 9.541159] device: 'usbmon0': device_add
[ 9.541425] PM: Adding info for No Bus:usbmon0
[ 9.541789] initcall mon_init+0x0/0x116 returned 0 after 976 usecs
[ 9.541794] calling ehci_hcd_init+0x0/0xe7 @ 1
[ 9.541796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.541799] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 9.541839] bus: 'pci': add driver ehci_hcd
[ 9.541889] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[ 9.541894] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[ 9.541929] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 9.541933] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
[ 9.541941] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[ 9.603158] initcall ehci_hcd_init+0x0/0xe7 returned 0 after 60546 usecs
[ 9.603162] calling isp1362_init+0x0/0x3e @ 1
[ 9.603164] driver isp1362-hcd, 2005-04-04
[ 9.603171] bus: 'platform': add driver isp1362-hcd
[ 9.603427] initcall isp1362_init+0x0/0x3e returned 0 after 0 usecs
[ 9.603431] calling ohci_hcd_mod_init+0x0/0xd7 @ 1
[ 9.603433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.603436] ohci_hcd: block sizes: ed 80 td 96
[ 9.603467] bus: 'pci': add driver ohci_hcd
[ 9.603497] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[ 9.603501] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[ 9.603531] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 9.603534] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
[ 9.603541] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[ 9.603854] bus: 'platform': add driver sm501-usb
[ 9.604186] initcall ohci_hcd_mod_init+0x0/0xd7 returned 0 after 976 usecs
[ 9.604189] calling uhci_hcd_init+0x0/0x11d @ 1
[ 9.604192] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.604669] bus: 'pci': add driver uhci_hcd
[ 9.604986] initcall uhci_hcd_init+0x0/0x11d returned 0 after 0 usecs
[ 9.604990] calling xhci_hcd_init+0x0/0x2c @ 1
[ 9.605019] bus: 'pci': add driver xhci_hcd
[ 9.605326] initcall xhci_hcd_init+0x0/0x2c returned 0 after 976 usecs
[ 9.605330] calling sl811h_init+0x0/0x3e @ 1
[ 9.605332] sl811: driver sl811-hcd, 19 May 2005
[ 9.605337] bus: 'platform': add driver sl811-hcd
[ 9.605629] initcall sl811h_init+0x0/0x3e returned 0 after 0 usecs
[ 9.605633] calling init_sl811_cs+0x0/0x12 @ 1
[ 9.605638] bus: 'pcmcia': add driver sl811_cs
[ 9.667156] initcall init_sl811_cs+0x0/0x12 returned 0 after 60546 usecs
[ 9.667160] calling r8a66597_init+0x0/0x3e @ 1
[ 9.667162] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 9.667166] bus: 'platform': add driver r8a66597_hcd
[ 9.667424] initcall r8a66597_init+0x0/0x3e returned 0 after 0 usecs
[ 9.667427] calling isp1760_init+0x0/0x50 @ 1
[ 9.668254] bus: 'platform': add driver isp1760
[ 9.668592] bus: 'pci': add driver isp1760
[ 9.668925] initcall isp1760_init+0x0/0x50 returned 0 after 976 usecs
[ 9.668928] calling hwahc_driver_init+0x0/0x1b @ 1
[ 9.668935] bus: 'usb': add driver hwa-hc
[ 9.669230] usbcore: registered new interface driver hwa-hc
[ 9.669234] initcall hwahc_driver_init+0x0/0x1b returned 0 after 976 usecs
[ 9.669237] calling c67x00_init+0x0/0x12 @ 1
[ 9.669242] bus: 'platform': add driver c67x00
[ 9.669510] initcall c67x00_init+0x0/0x12 returned 0 after 0 usecs
[ 9.669513] calling wusbcore_init+0x0/0x73 @ 1
[ 9.704095] initcall wusbcore_init+0x0/0x73 returned 0 after 34179 usecs
[ 9.704098] calling usblp_init+0x0/0x1b @ 1
[ 9.704102] bus: 'usb': add driver usblp
[ 9.704359] usbcore: registered new interface driver usblp
[ 9.704363] initcall usblp_init+0x0/0x1b returned 0 after 0 usecs
[ 9.704366] calling usbtmc_init+0x0/0x39 @ 1
[ 9.704370] bus: 'usb': add driver usbtmc
[ 9.704642] usbcore: registered new interface driver usbtmc
[ 9.704646] initcall usbtmc_init+0x0/0x39 returned 0 after 0 usecs
[ 9.704649] calling usb_stor_init+0x0/0x50 @ 1
[ 9.704651] Initializing USB Mass Storage driver...
[ 9.704655] bus: 'usb': add driver usb-storage
[ 9.704963] usbcore: registered new interface driver usb-storage
[ 9.704966] USB Mass Storage support registered.
[ 9.704971] initcall usb_stor_init+0x0/0x50 returned 0 after 0 usecs
[ 9.704974] calling usb_usual_init+0x0/0x3f @ 1
[ 9.705024] bus: 'usb': add driver libusual
[ 9.705499] usbcore: registered new interface driver libusual
[ 9.705503] initcall usb_usual_init+0x0/0x3f returned 0 after 976 usecs
[ 9.705507] calling alauda_init+0x0/0x1b @ 1
[ 9.705511] bus: 'usb': add driver ums-alauda
[ 9.705797] usbcore: registered new interface driver ums-alauda
[ 9.705801] initcall alauda_init+0x0/0x1b returned 0 after 0 usecs
[ 9.705804] calling cypress_init+0x0/0x1b @ 1
[ 9.705808] bus: 'usb': add driver ums-cypress
[ 9.706137] usbcore: registered new interface driver ums-cypress
[ 9.706141] initcall cypress_init+0x0/0x1b returned 0 after 976 usecs
[ 9.706144] calling datafab_init+0x0/0x1b @ 1
[ 9.706148] bus: 'usb': add driver ums-datafab
[ 9.731143] usbcore: registered new interface driver ums-datafab
[ 9.731147] initcall datafab_init+0x0/0x1b returned 0 after 24414 usecs
[ 9.731151] calling isd200_init+0x0/0x1b @ 1
[ 9.731155] bus: 'usb': add driver ums-isd200
[ 9.731440] usbcore: registered new interface driver ums-isd200
[ 9.731444] initcall isd200_init+0x0/0x1b returned 0 after 0 usecs
[ 9.731448] calling karma_init+0x0/0x1b @ 1
[ 9.731452] bus: 'usb': add driver ums-karma
[ 9.731717] usbcore: registered new interface driver ums-karma
[ 9.731721] initcall karma_init+0x0/0x1b returned 0 after 0 usecs
[ 9.731724] calling onetouch_init+0x0/0x1b @ 1
[ 9.731728] bus: 'usb': add driver ums-onetouch
[ 9.732060] usbcore: registered new interface driver ums-onetouch
[ 9.732064] initcall onetouch_init+0x0/0x1b returned 0 after 976 usecs
[ 9.732067] calling usbat_init+0x0/0x1b @ 1
[ 9.732071] bus: 'usb': add driver ums-usbat
[ 9.732356] usbcore: registered new interface driver ums-usbat
[ 9.732360] initcall usbat_init+0x0/0x1b returned 0 after 0 usecs
[ 9.732363] calling usb_mdc800_init+0x0/0x316 @ 1
[ 9.732381] bus: 'usb': add driver mdc800
[ 9.732688] usbcore: registered new interface driver mdc800
[ 9.732691] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 9.732695] initcall usb_mdc800_init+0x0/0x316 returned 0 after 0 usecs
[ 9.732698] calling usb_serial_init+0x0/0x236 @ 1
[ 9.732988] bus: 'usb-serial': registered
[ 9.733037] bus: 'usb': add driver usbserial
[ 9.733324] usbcore: registered new interface driver usbserial
[ 9.733328] bus: 'usb-serial': add driver generic
[ 9.795139] USB Serial support registered for generic
[ 9.795144] bus: 'usb': add driver usbserial_generic
[ 9.795437] usbcore: registered new interface driver usbserial_generic
[ 9.795439] usbserial: USB Serial Driver core
[ 9.795444] initcall usb_serial_init+0x0/0x236 returned 0 after 61523 usecs
[ 9.795447] calling aircable_init+0x0/0x45 @ 1
[ 9.795450] bus: 'usb-serial': add driver aircable
[ 9.795722] USB Serial support registered for aircable
[ 9.795726] bus: 'usb': add driver aircable
[ 9.796056] usbcore: registered new interface driver aircable
[ 9.796061] initcall aircable_init+0x0/0x45 returned 0 after 976 usecs
[ 9.796064] calling ark3116_init+0x0/0x5f @ 1
[ 9.796068] bus: 'usb-serial': add driver ark3116
[ 9.796335] USB Serial support registered for ark3116
[ 9.796340] bus: 'usb': add driver ark3116
[ 9.796643] usbcore: registered new interface driver ark3116
[ 9.796645] ark3116:v0.5:USB ARK3116 serial/IrDA driver
[ 9.796649] initcall ark3116_init+0x0/0x5f returned 0 after 0 usecs
[ 9.796652] calling belkin_sa_init+0x0/0x58 @ 1
[ 9.796656] bus: 'usb-serial': add driver belkin
[ 9.796944] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 9.796949] bus: 'usb': add driver belkin
[ 9.797234] usbcore: registered new interface driver belkin
[ 9.797237] belkin_sa: v1.2:USB Belkin Serial converter driver
[ 9.797240] initcall belkin_sa_init+0x0/0x58 returned 0 after 976 usecs
[ 9.797244] calling cyberjack_init+0x0/0x66 @ 1
[ 9.797247] bus: 'usb-serial': add driver cyberjack
[ 9.859133] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 9.859138] bus: 'usb': add driver cyberjack
[ 9.859423] usbcore: registered new interface driver cyberjack
[ 9.859425] cyberjack: v1.01 Matthias Bruestle
[ 9.859427] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 9.859431] initcall cyberjack_init+0x0/0x66 returned 0 after 60546 usecs
[ 9.859435] calling debug_init+0x0/0x45 @ 1
[ 9.859438] bus: 'usb-serial': add driver debug
[ 9.859710] USB Serial support registered for debug
[ 9.859715] bus: 'usb': add driver debug
[ 9.859991] usbcore: registered new interface driver debug
[ 9.859995] initcall debug_init+0x0/0x45 returned 0 after 0 usecs
[ 9.860054] calling edgeport_init+0x0/0xc0 @ 1
[ 9.860058] bus: 'usb-serial': add driver edgeport_2
[ 9.860331] USB Serial support registered for Edgeport 2 port adapter
[ 9.860335] bus: 'usb-serial': add driver edgeport_4
[ 9.860663] USB Serial support registered for Edgeport 4 port adapter
[ 9.860667] bus: 'usb-serial': add driver edgeport_8
[ 9.860941] USB Serial support registered for Edgeport 8 port adapter
[ 9.860945] bus: 'usb-serial': add driver epic
[ 9.861243] USB Serial support registered for EPiC device
[ 9.861249] bus: 'usb': add driver io_edgeport
[ 9.923154] usbcore: registered new interface driver io_edgeport
[ 9.923157] io_edgeport: v2.7:Edgeport USB Serial Driver
[ 9.923161] initcall edgeport_init+0x0/0xc0 returned 0 after 61523 usecs
[ 9.923164] calling edgeport_init+0x0/0x76 @ 1
[ 9.923168] bus: 'usb-serial': add driver edgeport_ti_1
[ 9.923447] USB Serial support registered for Edgeport TI 1 port adapter
[ 9.923451] bus: 'usb-serial': add driver edgeport_ti_2
[ 9.923734] USB Serial support registered for Edgeport TI 2 port adapter
[ 9.923740] bus: 'usb': add driver io_ti
[ 9.924070] usbcore: registered new interface driver io_ti
[ 9.924072] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[ 9.924076] initcall edgeport_init+0x0/0x76 returned 0 after 976 usecs
[ 9.924080] calling empeg_init+0x0/0x13a @ 1
[ 9.924452] bus: 'usb-serial': add driver empeg
[ 9.924745] USB Serial support registered for empeg
[ 9.924750] bus: 'usb': add driver empeg
[ 9.925079] usbcore: registered new interface driver empeg
[ 9.925081] empeg: v1.2:USB Empeg Mark I/II Driver
[ 9.925085] initcall empeg_init+0x0/0x13a returned 0 after 976 usecs
[ 9.925089] calling ftdi_init+0x0/0xcb @ 1
[ 9.925093] bus: 'usb-serial': add driver ftdi_sio
[ 9.925356] USB Serial support registered for FTDI USB Serial Device
[ 9.925361] bus: 'usb': add driver ftdi_sio
[ 9.925652] usbcore: registered new interface driver ftdi_sio
[ 9.925654] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 9.925658] initcall ftdi_init+0x0/0xcb returned 0 after 0 usecs
[ 9.925661] calling funsoft_init+0x0/0x45 @ 1
[ 9.925665] bus: 'usb-serial': add driver funsoft
[ 9.987136] USB Serial support registered for funsoft
[ 9.987141] bus: 'usb': add driver funsoft
[ 9.987433] usbcore: registered new interface driver funsoft
[ 9.987438] initcall funsoft_init+0x0/0x45 returned 0 after 60546 usecs
[ 9.987441] calling usb_ipw_init+0x0/0x58 @ 1
[ 9.987445] bus: 'usb-serial': add driver ipw
[ 9.987706] USB Serial support registered for IPWireless converter
[ 9.987712] bus: 'usb': add driver ipwtty
[ 9.987996] usbcore: registered new interface driver ipwtty
[ 9.988052] ipw: v0.3:IPWireless tty driver
[ 9.988056] initcall usb_ipw_init+0x0/0x58 returned 0 after 976 usecs
[ 9.988059] calling ir_init+0x0/0x58 @ 1
[ 9.988063] bus: 'usb-serial': add driver ir-usb
[ 9.988341] USB Serial support registered for IR Dongle
[ 9.988346] bus: 'usb': add driver ir-usb
[ 9.988672] usbcore: registered new interface driver ir-usb
[ 9.988674] ir_usb: v0.4:USB IR Dongle driver
[ 9.988678] initcall ir_init+0x0/0x58 returned 0 after 0 usecs
[ 9.988681] calling keyspan_init+0x0/0xb6 @ 1
[ 9.988685] bus: 'usb-serial': add driver keyspan_no_firm
[ 9.988966] USB Serial support registered for Keyspan - (without firmware)
[ 9.988970] bus: 'usb-serial': add driver keyspan_1
[ 9.989250] USB Serial support registered for Keyspan 1 port adapter
[ 9.989255] bus: 'usb-serial': add driver keyspan_2
[ 10.051136] USB Serial support registered for Keyspan 2 port adapter
[ 10.051140] bus: 'usb-serial': add driver keyspan_4
[ 10.051422] USB Serial support registered for Keyspan 4 port adapter
[ 10.051429] bus: 'usb': add driver keyspan
[ 10.051705] usbcore: registered new interface driver keyspan
[ 10.051707] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 10.051711] initcall keyspan_init+0x0/0xb6 returned 0 after 61523 usecs
[ 10.051715] calling keyspan_pda_init+0x0/0x77 @ 1
[ 10.051719] bus: 'usb-serial': add driver keyspan_pda
[ 10.051981] USB Serial support registered for Keyspan PDA
[ 10.051985] bus: 'usb-serial': add driver keyspan_pda_pre
[ 10.052331] USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 10.052337] bus: 'usb': add driver keyspan_pda
[ 10.052653] usbcore: registered new interface driver keyspan_pda
[ 10.052655] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[ 10.052659] initcall keyspan_pda_init+0x0/0x77 returned 0 after 976 usecs
[ 10.052663] calling klsi_105_init+0x0/0x58 @ 1
[ 10.052667] bus: 'usb-serial': add driver kl5kusb105d
[ 10.052928] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 10.052933] bus: 'usb': add driver kl5kusb105d
[ 10.053231] usbcore: registered new interface driver kl5kusb105d
[ 10.053233] kl5kusb105: v0.3a:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[ 10.053237] initcall klsi_105_init+0x0/0x58 returned 0 after 976 usecs
[ 10.053240] calling mct_u232_init+0x0/0x59 @ 1
[ 10.053244] bus: 'usb-serial': add driver mct_u232
[ 10.115137] USB Serial support registered for MCT U232
[ 10.115143] bus: 'usb': add driver mct_u232
[ 10.115444] usbcore: registered new interface driver mct_u232
[ 10.115446] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[ 10.115450] initcall mct_u232_init+0x0/0x59 returned 0 after 60546 usecs
[ 10.115454] calling moschip7720_init+0x0/0x76 @ 1
[ 10.115458] bus: 'usb-serial': add driver moschip7720
[ 10.115746] USB Serial support registered for Moschip 2 port adapter
[ 10.115749] mos7720: 1.0.0.4F:Moschip USB Serial Driver
[ 10.115754] bus: 'usb': add driver moschip7720
[ 10.116086] usbcore: registered new interface driver moschip7720
[ 10.116090] initcall moschip7720_init+0x0/0x76 returned 0 after 976 usecs
[ 10.116093] calling moschip7840_init+0x0/0xcc @ 1
[ 10.116098] bus: 'usb-serial': add driver mos7840
[ 10.116374] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 10.116377] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[ 10.116382] bus: 'usb': add driver mos7840
[ 10.116743] usbcore: registered new interface driver mos7840
[ 10.116747] initcall moschip7840_init+0x0/0xcc returned 0 after 0 usecs
[ 10.116751] calling moto_init+0x0/0x45 @ 1
[ 10.116755] bus: 'usb-serial': add driver moto-modem
[ 10.117047] USB Serial support registered for moto-modem
[ 10.117052] bus: 'usb': add driver moto-modem
[ 10.117332] usbcore: registered new interface driver moto-modem
[ 10.117336] initcall moto_init+0x0/0x45 returned 0 after 976 usecs
[ 10.117340] calling omninet_init+0x0/0x59 @ 1
[ 10.117344] bus: 'usb-serial': add driver omninet
[ 10.179134] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 10.179140] bus: 'usb': add driver omninet
[ 10.179452] usbcore: registered new interface driver omninet
[ 10.179454] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[ 10.179458] initcall omninet_init+0x0/0x59 returned 0 after 60546 usecs
[ 10.179462] calling opticon_init+0x0/0x45 @ 1
[ 10.179466] bus: 'usb-serial': add driver opticon
[ 10.179736] USB Serial support registered for opticon
[ 10.179742] bus: 'usb': add driver opticon
[ 10.180080] usbcore: registered new interface driver opticon
[ 10.180084] initcall opticon_init+0x0/0x45 returned 0 after 976 usecs
[ 10.180088] calling oti6858_init+0x0/0x45 @ 1
[ 10.180092] bus: 'usb-serial': add driver oti6858
[ 10.180358] USB Serial support registered for oti6858
[ 10.180364] bus: 'usb': add driver oti6858
[ 10.180688] usbcore: registered new interface driver oti6858
[ 10.180692] initcall oti6858_init+0x0/0x45 returned 0 after 0 usecs
[ 10.180695] calling pl2303_init+0x0/0x58 @ 1
[ 10.180700] bus: 'usb-serial': add driver pl2303
[ 10.180963] USB Serial support registered for pl2303
[ 10.180968] bus: 'usb': add driver pl2303
[ 10.181244] usbcore: registered new interface driver pl2303
[ 10.181246] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 10.181250] initcall pl2303_init+0x0/0x58 returned 0 after 976 usecs
[ 10.181253] calling qcinit+0x0/0x45 @ 1
[ 10.181257] bus: 'usb-serial': add driver qcserial
[ 10.243133] USB Serial support registered for Qualcomm USB modem
[ 10.243140] bus: 'usb': add driver qcserial
[ 10.243437] usbcore: registered new interface driver qcserial
[ 10.243441] initcall qcinit+0x0/0x45 returned 0 after 60546 usecs
[ 10.243445] calling safe_init+0x0/0xc6 @ 1
[ 10.243447] safe_serial: v0.0b:USB Safe Encapsulated Serial
[ 10.243451] bus: 'usb-serial': add driver safe_serial
[ 10.243712] USB Serial support registered for safe_serial
[ 10.243718] bus: 'usb': add driver safe_serial
[ 10.243982] usbcore: registered new interface driver safe_serial
[ 10.243986] initcall safe_init+0x0/0xc6 returned 0 after 0 usecs
[ 10.243989] calling siemens_usb_mpi_init+0x0/0x66 @ 1
[ 10.243994] bus: 'usb-serial': add driver siemens_mpi
[ 10.244341] USB Serial support registered for siemens_mpi
[ 10.244347] bus: 'usb': add driver siemens_mpi
[ 10.244695] usbcore: registered new interface driver siemens_mpi
[ 10.244697] Driver for Siemens USB/MPI adapter
[ 10.244699] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[ 10.244703] initcall siemens_usb_mpi_init+0x0/0x66 returned 0 after 976 usecs
[ 10.244707] calling sierra_init+0x0/0x58 @ 1
[ 10.244712] bus: 'usb-serial': add driver sierra
[ 10.244992] USB Serial support registered for Sierra USB modem
[ 10.245017] bus: 'usb': add driver sierra
[ 10.245303] usbcore: registered new interface driver sierra
[ 10.245305] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 10.245309] initcall sierra_init+0x0/0x58 returned 0 after 976 usecs
[ 10.245312] calling whiteheat_init+0x0/0x76 @ 1
[ 10.245317] bus: 'usb-serial': add driver whiteheatnofirm
[ 10.307137] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 10.307142] bus: 'usb-serial': add driver whiteheat
[ 10.307435] USB Serial support registered for Connect Tech - WhiteHEAT
[ 10.307442] bus: 'usb': add driver whiteheat
[ 10.307731] usbcore: registered new interface driver whiteheat
[ 10.307734] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[ 10.307738] initcall whiteheat_init+0x0/0x76 returned 0 after 60546 usecs
[ 10.307742] calling appledisplay_init+0x0/0x59 @ 1
[ 10.307859] bus: 'usb': add driver appledisplay
[ 10.308178] usbcore: registered new interface driver appledisplay
[ 10.308182] initcall appledisplay_init+0x0/0x59 returned 0 after 976 usecs
[ 10.308186] calling berry_init+0x0/0x1b @ 1
[ 10.308191] bus: 'usb': add driver berry_charge
[ 10.308507] usbcore: registered new interface driver berry_charge
[ 10.308511] initcall berry_init+0x0/0x1b returned 0 after 0 usecs
[ 10.308515] calling usb_cytherm_init+0x0/0x4a @ 1
[ 10.308519] bus: 'usb': add driver cytherm
[ 10.308808] usbcore: registered new interface driver cytherm
[ 10.308811] cytherm: v1.0:Cypress USB Thermometer driver
[ 10.308815] initcall usb_cytherm_init+0x0/0x4a returned 0 after 0 usecs
[ 10.308818] calling emi26_init+0x0/0x1b @ 1
[ 10.308822] bus: 'usb': add driver emi26 - firmware loader
[ 10.309100] usbcore: registered new interface driver emi26 - firmware loader
[ 10.309104] initcall emi26_init+0x0/0x1b returned 0 after 976 usecs
[ 10.309107] calling emi62_init+0x0/0x38 @ 1
[ 10.309112] bus: 'usb': add driver emi62 - firmware loader
[ 10.371143] usbcore: registered new interface driver emi62 - firmware loader
[ 10.371147] initcall emi62_init+0x0/0x38 returned 0 after 60546 usecs
[ 10.371151] calling usb_idmouse_init+0x0/0x49 @ 1
[ 10.371152] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[ 10.371158] bus: 'usb': add driver idmouse
[ 10.371455] usbcore: registered new interface driver idmouse
[ 10.371459] initcall usb_idmouse_init+0x0/0x49 returned 0 after 0 usecs
[ 10.371462] calling ld_usb_init+0x0/0x3b @ 1
[ 10.371467] bus: 'usb': add driver ldusb
[ 10.371748] usbcore: registered new interface driver ldusb
[ 10.371752] initcall ld_usb_init+0x0/0x3b returned 0 after 0 usecs
[ 10.371756] calling lego_usb_tower_init+0x0/0x8b @ 1
[ 10.371758] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
[ 10.371763] bus: 'usb': add driver legousbtower
[ 10.372092] usbcore: registered new interface driver legousbtower
[ 10.372094] legousbtower: v0.96:LEGO USB Tower Driver
[ 10.372096] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
[ 10.372101] initcall lego_usb_tower_init+0x0/0x8b returned 0 after 976 usecs
[ 10.372104] calling usb_rio_init+0x0/0x38 @ 1
[ 10.372109] bus: 'usb': add driver rio500
[ 10.372392] usbcore: registered new interface driver rio500
[ 10.372394] rio500: v1.1:USB Rio 500 driver
[ 10.372398] initcall usb_rio_init+0x0/0x38 returned 0 after 0 usecs
[ 10.372401] calling usbtest_init+0x0/0x3f @ 1
[ 10.372406] bus: 'usb': add driver usbtest
[ 10.372741] usbcore: registered new interface driver usbtest
[ 10.372745] initcall usbtest_init+0x0/0x3f returned 0 after 0 usecs
[ 10.372749] calling tv_init+0x0/0x4a @ 1
[ 10.372754] bus: 'usb': add driver trancevibrator
[ 10.373050] usbcore: registered new interface driver trancevibrator
[ 10.373052] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[ 10.373056] initcall tv_init+0x0/0x4a returned 0 after 976 usecs
[ 10.373059] calling uss720_init+0x0/0x62 @ 1
[ 10.373064] bus: 'usb': add driver uss720
[ 10.373360] usbcore: registered new interface driver uss720
[ 10.373363] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[ 10.373365] uss720: NOTE: this is a special purpose driver to allow nonstandard
[ 10.373367] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[ 10.373369] uss720: If you just want to connect to a printer, use usblp instead
[ 10.373373] initcall uss720_init+0x0/0x62 returned 0 after 0 usecs
[ 10.373376] calling usb_sevseg_init+0x0/0x3a @ 1
[ 10.373381] bus: 'usb': add driver usbsevseg
[ 10.435156] usbcore: registered new interface driver usbsevseg
[ 10.435161] initcall usb_sevseg_init+0x0/0x3a returned 0 after 60546 usecs
[ 10.435165] calling vstusb_init+0x0/0x41 @ 1
[ 10.435170] bus: 'usb': add driver vstusb
[ 10.435461] usbcore: registered new interface driver vstusb
[ 10.435465] initcall vstusb_init+0x0/0x41 returned 0 after 0 usecs
[ 10.435469] calling speedtch_usb_init+0x0/0x3e @ 1
[ 10.435471] drivers/usb/atm/speedtch.c: speedtch_usb_init: driver version 1.10
[ 10.435476] bus: 'usb': add driver speedtch
[ 10.435744] usbcore: registered new interface driver speedtch
[ 10.435749] initcall speedtch_usb_init+0x0/0x3e returned 0 after 0 usecs
[ 10.435752] calling usbatm_usb_init+0x0/0x65 @ 1
[ 10.435754] drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
[ 10.435758] initcall usbatm_usb_init+0x0/0x65 returned 0 after 0 usecs
[ 10.435761] calling xusbatm_init+0x0/0x13a @ 1
[ 10.435763] drivers/usb/atm/xusbatm.c: xusbatm_init
[ 10.435765] xusbatm: malformed module parameters
[ 10.435769] initcall xusbatm_init+0x0/0x13a returned -22 after 0 usecs
[ 10.435772] initcall xusbatm_init+0x0/0x13a returned with error code -22
[ 10.435776] calling i8042_init+0x0/0x105 @ 1
[ 10.435858] Registering platform device 'i8042'. Parent at platform
[ 10.435862] device: 'i8042': device_add
[ 10.435877] bus: 'platform': add device i8042
[ 10.435916] PM: Adding info for platform:i8042
[ 10.436297] bus: 'platform': add driver i8042
[ 10.436324] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[ 10.436328] bus: 'platform': really_probe: probing driver i8042 with device i8042
[ 10.439638] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.439683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.439695] driver: 'i8042': driver_bound: bound to device 'i8042'
[ 10.439698] bus: 'platform': really_probe: bound device i8042 to driver i8042
[ 10.440130] initcall i8042_init+0x0/0x105 returned 0 after 4882 usecs
[ 10.440134] calling parkbd_init+0x0/0x140 @ 1
[ 10.440142] parport0: cannot grant exclusive access for device parkbd
[ 10.440151] initcall parkbd_init+0x0/0x140 returned -19 after 0 usecs
[ 10.440154] calling serport_init+0x0/0x34 @ 1
[ 10.440159] initcall serport_init+0x0/0x34 returned 0 after 0 usecs
[ 10.440162] calling ct82c710_init+0x0/0xc2 @ 1
[ 10.440190] initcall ct82c710_init+0x0/0xc2 returned -19 after 0 usecs
[ 10.440193] calling pcips2_init+0x0/0x1b @ 1
[ 10.440214] bus: 'pci': add driver pcips2
[ 10.440587] initcall pcips2_init+0x0/0x1b returned 0 after 0 usecs
[ 10.440591] calling altera_ps2_init+0x0/0x12 @ 1
[ 10.440596] bus: 'platform': add driver altera_ps2
[ 10.440876] initcall altera_ps2_init+0x0/0x12 returned 0 after 0 usecs
[ 10.440879] calling ns558_init+0x0/0x38 @ 1
[ 10.455445] initcall ns558_init+0x0/0x38 returned -19 after 14648 usecs
[ 10.455449] calling mousedev_init+0x0/0x62 @ 1
[ 10.455495] device: 'mice': device_add
[ 10.455766] PM: Adding info for No Bus:mice
[ 10.456148] mice: PS/2 mouse device common for all mice
[ 10.456154] initcall mousedev_init+0x0/0x62 returned 0 after 976 usecs
[ 10.456158] calling evdev_init+0x0/0x12 @ 1
[ 10.456163] initcall evdev_init+0x0/0x12 returned 0 after 0 usecs
[ 10.456167] calling evbug_init+0x0/0x12 @ 1
[ 10.456172] initcall evbug_init+0x0/0x12 returned 0 after 0 usecs
[ 10.456175] calling adp5520_keys_init+0x0/0x12 @ 1
[ 10.456183] bus: 'platform': add driver adp5520-keys
[ 10.456473] initcall adp5520_keys_init+0x0/0x12 returned 0 after 0 usecs
[ 10.456477] calling adp5588_init+0x0/0x14 @ 1
[ 10.456482] bus: 'i2c': add driver adp5588_keys
[ 10.456774] i2c-core: driver [adp5588_keys] registered
[ 10.456781] initcall adp5588_init+0x0/0x14 returned 0 after 0 usecs
[ 10.456784] calling atkbd_init+0x0/0x27 @ 1
[ 10.456792] bus: 'serio': add driver atkbd
[ 10.457080] initcall atkbd_init+0x0/0x27 returned 0 after 976 usecs
[ 10.457083] calling lkkbd_init+0x0/0x1b @ 1
[ 10.457086] bus: 'serio': add driver lkkbd
[ 10.457357] initcall lkkbd_init+0x0/0x1b returned 0 after 0 usecs
[ 10.457361] calling lm8323_init+0x0/0x14 @ 1
[ 10.457364] bus: 'i2c': add driver lm8323
[ 10.457623] i2c-core: driver [lm8323] registered
[ 10.457629] initcall lm8323_init+0x0/0x14 returned 0 after 0 usecs
[ 10.457632] calling max7359_init+0x0/0x14 @ 1
[ 10.457636] bus: 'i2c': add driver max7359
[ 10.457941] i2c-core: driver [max7359] registered
[ 10.457947] initcall max7359_init+0x0/0x14 returned 0 after 0 usecs
[ 10.457951] calling nkbd_init+0x0/0x1b @ 1
[ 10.457954] bus: 'serio': add driver newtonkbd
[ 10.458226] initcall nkbd_init+0x0/0x1b returned 0 after 976 usecs
[ 10.458230] calling opencores_kbd_init+0x0/0x12 @ 1
[ 10.458236] bus: 'platform': add driver opencores-kbd
[ 10.458495] initcall opencores_kbd_init+0x0/0x12 returned 0 after 0 usecs
[ 10.458499] calling sunkbd_init+0x0/0x1b @ 1
[ 10.458502] bus: 'serio': add driver sunkbd
[ 10.458771] initcall sunkbd_init+0x0/0x1b returned 0 after 0 usecs
[ 10.458774] calling xtkbd_init+0x0/0x1b @ 1
[ 10.458777] bus: 'serio': add driver xtkbd
[ 10.459137] initcall xtkbd_init+0x0/0x1b returned 0 after 976 usecs
[ 10.459140] calling adi_init+0x0/0x1b @ 1
[ 10.459144] bus: 'gameport': add driver adi
[ 10.459441] initcall adi_init+0x0/0x1b returned 0 after 0 usecs
[ 10.459445] calling gf2k_init+0x0/0x1b @ 1
[ 10.459448] bus: 'gameport': add driver gf2k
[ 10.459716] initcall gf2k_init+0x0/0x1b returned 0 after 0 usecs
[ 10.459719] calling grip_init+0x0/0x1b @ 1
[ 10.459722] bus: 'gameport': add driver grip
[ 10.459992] initcall grip_init+0x0/0x1b returned 0 after 0 usecs
[ 10.460059] calling grip_init+0x0/0x1b @ 1
[ 10.460062] bus: 'gameport': add driver grip_mp
[ 10.460365] initcall grip_init+0x0/0x1b returned 0 after 0 usecs
[ 10.460369] calling guillemot_init+0x0/0x1b @ 1
[ 10.460372] bus: 'gameport': add driver guillemot
[ 10.460628] initcall guillemot_init+0x0/0x1b returned 0 after 0 usecs
[ 10.460632] calling iforce_init+0x0/0x1b @ 1
[ 10.460645] bus: 'usb': add driver iforce
[ 10.460928] usbcore: registered new interface driver iforce
[ 10.460932] initcall iforce_init+0x0/0x1b returned 0 after 0 usecs
[ 10.460936] calling interact_init+0x0/0x1b @ 1
[ 10.460939] bus: 'gameport': add driver interact
[ 10.461244] initcall interact_init+0x0/0x1b returned 0 after 976 usecs
[ 10.461247] calling joydump_init+0x0/0x1b @ 1
[ 10.461251] bus: 'gameport': add driver joydump
[ 10.461568] initcall joydump_init+0x0/0x1b returned 0 after 0 usecs
[ 10.461572] calling magellan_init+0x0/0x1b @ 1
[ 10.461575] bus: 'serio': add driver magellan
[ 10.461838] initcall magellan_init+0x0/0x1b returned 0 after 0 usecs
[ 10.461841] calling sw_init+0x0/0x1b @ 1
[ 10.461845] bus: 'gameport': add driver sidewinder
[ 10.462118] initcall sw_init+0x0/0x1b returned 0 after 976 usecs
[ 10.462122] calling spaceball_init+0x0/0x1b @ 1
[ 10.462125] bus: 'serio': add driver spaceball
[ 10.462402] initcall spaceball_init+0x0/0x1b returned 0 after 0 usecs
[ 10.462406] calling tgfx_init+0x0/0xc1 @ 1
[ 10.462409] initcall tgfx_init+0x0/0xc1 returned -19 after 0 usecs
[ 10.462413] calling twidjoy_init+0x0/0x1b @ 1
[ 10.462416] bus: 'serio': add driver twidjoy
[ 10.462726] initcall twidjoy_init+0x0/0x1b returned 0 after 0 usecs
[ 10.462729] calling zhenhua_init+0x0/0x1b @ 1
[ 10.462733] bus: 'serio': add driver zhenhua
[ 10.463035] initcall zhenhua_init+0x0/0x1b returned 0 after 976 usecs
[ 10.463039] calling apanel_init+0x0/0x1ab @ 1
[ 10.463342] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 10.463347] initcall apanel_init+0x0/0x1ab returned -19 after 0 usecs
[ 10.463350] calling ati_remote_init+0x0/0x4b @ 1
[ 10.463358] bus: 'usb': add driver ati_remote
[ 10.463635] usbcore: registered new interface driver ati_remote
[ 10.463638] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[ 10.463642] initcall ati_remote_init+0x0/0x4b returned 0 after 0 usecs
[ 10.463645] calling pcspkr_init+0x0/0x12 @ 1
[ 10.463653] bus: 'platform': add driver pcspkr
[ 10.463676] bus: 'platform': driver_probe_device: matched device pcspkr with driver pcspkr
[ 10.463682] bus: 'platform': really_probe: probing driver pcspkr with device pcspkr
[ 10.463725] device: 'input0': device_add
[ 10.463825] PM: Adding info for No Bus:input0
[ 10.464232] input: PC Speaker as /class/input/input0
[ 10.464391] device: 'event0': device_add
[ 10.464721] PM: Adding info for No Bus:event0
[ 10.465223] evbug.c: Connected device: input0 (PC Speaker at isa0061/input0)
[ 10.465230] driver: 'pcspkr': driver_bound: bound to device 'pcspkr'
[ 10.465233] bus: 'platform': really_probe: bound device pcspkr to driver pcspkr
[ 10.465512] initcall pcspkr_init+0x0/0x12 returned 0 after 1953 usecs
[ 10.465516] calling uinput_init+0x0/0x12 @ 1
[ 10.465544] device: 'uinput': device_add
[ 10.465771] PM: Adding info for No Bus:uinput
[ 10.466105] initcall uinput_init+0x0/0x12 returned 0 after 976 usecs
[ 10.466109] calling wm831x_on_init+0x0/0x12 @ 1
[ 10.466118] bus: 'platform': add driver wm831x-on
[ 10.466390] initcall wm831x_on_init+0x0/0x12 returned 0 after 0 usecs
[ 10.466393] calling bq32k_init+0x0/0x14 @ 1
[ 10.466399] bus: 'i2c': add driver bq32k
[ 10.466709] i2c-core: driver [bq32k] registered
[ 10.466716] initcall bq32k_init+0x0/0x14 returned 0 after 0 usecs
[ 10.466719] calling cmos_init+0x0/0x30 @ 1
[ 10.466724] bus: 'platform': add driver rtc_cmos
[ 10.466740] bus: 'platform': driver_probe_device: matched device rtc_cmos with driver rtc_cmos
[ 10.466746] bus: 'platform': really_probe: probing driver rtc_cmos with device rtc_cmos
[ 10.466885] device: 'rtc0': device_add
[ 10.466947] PM: Adding info for No Bus:rtc0
[ 10.467275] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 10.467333] rtc0: alarms up to one day, 114 bytes nvram
[ 10.467336] driver: 'rtc_cmos': driver_bound: bound to device 'rtc_cmos'
[ 10.467339] bus: 'platform': really_probe: bound device rtc_cmos to driver rtc_cmos
[ 10.467595] initcall cmos_init+0x0/0x30 returned 0 after 976 usecs
[ 10.467598] calling ds1307_init+0x0/0x14 @ 1
[ 10.467603] bus: 'i2c': add driver rtc-ds1307
[ 10.467875] i2c-core: driver [rtc-ds1307] registered
[ 10.467881] initcall ds1307_init+0x0/0x14 returned 0 after 0 usecs
[ 10.467885] calling ds1374_init+0x0/0x14 @ 1
[ 10.467888] bus: 'i2c': add driver rtc-ds1374
[ 10.468254] i2c-core: driver [rtc-ds1374] registered
[ 10.468261] initcall ds1374_init+0x0/0x14 returned 0 after 976 usecs
[ 10.468264] calling ds1511_rtc_init+0x0/0x12 @ 1
[ 10.468270] bus: 'platform': add driver ds1511
[ 10.468554] initcall ds1511_rtc_init+0x0/0x12 returned 0 after 0 usecs
[ 10.468558] calling ds1553_init+0x0/0x12 @ 1
[ 10.468562] bus: 'platform': add driver rtc-ds1553
[ 10.468831] initcall ds1553_init+0x0/0x12 returned 0 after 0 usecs
[ 10.468835] calling ds1672_init+0x0/0x14 @ 1
[ 10.468839] bus: 'i2c': add driver rtc-ds1672
[ 10.469093] i2c-core: driver [rtc-ds1672] registered
[ 10.469099] initcall ds1672_init+0x0/0x14 returned 0 after 976 usecs
[ 10.469102] calling ds1742_init+0x0/0x12 @ 1
[ 10.469107] bus: 'platform': add driver rtc-ds1742
[ 10.469413] initcall ds1742_init+0x0/0x12 returned 0 after 0 usecs
[ 10.469417] calling fm3130_init+0x0/0x14 @ 1
[ 10.469421] bus: 'i2c': add driver rtc-fm3130
[ 10.469687] i2c-core: driver [rtc-fm3130] registered
[ 10.469693] initcall fm3130_init+0x0/0x14 returned 0 after 0 usecs
[ 10.469696] calling isl1208_init+0x0/0x14 @ 1
[ 10.469700] bus: 'i2c': add driver rtc-isl1208
[ 10.469958] i2c-core: driver [rtc-isl1208] registered
[ 10.469964] initcall isl1208_init+0x0/0x14 returned 0 after 0 usecs
[ 10.469967] calling m41t80_rtc_init+0x0/0x14 @ 1
[ 10.469971] bus: 'i2c': add driver rtc-m41t80
[ 10.470250] i2c-core: driver [rtc-m41t80] registered
[ 10.470257] initcall m41t80_rtc_init+0x0/0x14 returned 0 after 976 usecs
[ 10.470260] calling m48t86_rtc_init+0x0/0x12 @ 1
[ 10.470265] bus: 'platform': add driver rtc-m48t86
[ 10.470566] initcall m48t86_rtc_init+0x0/0x12 returned 0 after 0 usecs
[ 10.470570] calling max6900_init+0x0/0x14 @ 1
[ 10.470574] bus: 'i2c': add driver rtc-max6900
[ 10.470845] i2c-core: driver [rtc-max6900] registered
[ 10.470851] initcall max6900_init+0x0/0x14 returned 0 after 0 usecs
[ 10.470855] calling msm6242_rtc_init+0x0/0x19 @ 1
[ 10.470859] bus: 'platform': add driver rtc-msm6242
[ 10.471147] bus: 'platform': remove driver rtc-msm6242
[ 10.471392] driver: 'rtc-msm6242': driver_release
[ 10.471400] initcall msm6242_rtc_init+0x0/0x19 returned -19 after 976 usecs
[ 10.471404] calling pcf8563_init+0x0/0x14 @ 1
[ 10.471408] bus: 'i2c': add driver rtc-pcf8563
[ 10.471724] i2c-core: driver [rtc-pcf8563] registered
[ 10.471730] initcall pcf8563_init+0x0/0x14 returned 0 after 0 usecs
[ 10.471734] calling rp5c01_rtc_init+0x0/0x19 @ 1
[ 10.471739] bus: 'platform': add driver rtc-rp5c01
[ 10.472084] bus: 'platform': remove driver rtc-rp5c01
[ 10.472339] driver: 'rtc-rp5c01': driver_release
[ 10.472349] initcall rp5c01_rtc_init+0x0/0x19 returned -19 after 976 usecs
[ 10.472352] calling rs5c372_init+0x0/0x14 @ 1
[ 10.472356] bus: 'i2c': add driver rtc-rs5c372
[ 10.472627] i2c-core: driver [rtc-rs5c372] registered
[ 10.472634] initcall rs5c372_init+0x0/0x14 returned 0 after 0 usecs
[ 10.472637] calling rx8025_init+0x0/0x14 @ 1
[ 10.472641] bus: 'i2c': add driver rtc-rx8025
[ 10.472942] i2c-core: driver [rtc-rx8025] registered
[ 10.472948] initcall rx8025_init+0x0/0x14 returned 0 after 0 usecs
[ 10.472952] calling rx8581_init+0x0/0x14 @ 1
[ 10.472956] bus: 'i2c': add driver rtc-rx8581
[ 10.473224] i2c-core: driver [rtc-rx8581] registered
[ 10.473230] initcall rx8581_init+0x0/0x14 returned 0 after 976 usecs
[ 10.473234] calling s35390a_rtc_init+0x0/0x14 @ 1
[ 10.473238] bus: 'i2c': add driver rtc-s35390a
[ 10.473488] i2c-core: driver [rtc-s35390a] registered
[ 10.473495] initcall s35390a_rtc_init+0x0/0x14 returned 0 after 0 usecs
[ 10.473498] calling stk17ta8_init+0x0/0x12 @ 1
[ 10.473504] bus: 'platform': add driver stk17ta8
[ 10.473764] initcall stk17ta8_init+0x0/0x12 returned 0 after 0 usecs
[ 10.473767] calling test_init+0x0/0xb5 @ 1
[ 10.473772] bus: 'platform': add driver rtc-test
[ 10.474125] Registering platform device 'rtc-test.0'. Parent at platform
[ 10.474130] device: 'rtc-test.0': device_add
[ 10.474144] bus: 'platform': add device rtc-test.0
[ 10.474189] PM: Adding info for platform:rtc-test.0
[ 10.474473] bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test
[ 10.474479] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0
[ 10.474514] device: 'rtc1': device_add
[ 10.474575] PM: Adding info for No Bus:rtc1
[ 10.474848] rtc-test rtc-test.0: rtc core: registered test as rtc1
[ 10.474855] driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test'
[ 10.474858] bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test
[ 10.474867] Registering platform device 'rtc-test.1'. Parent at platform
[ 10.474872] device: 'rtc-test.1': device_add
[ 10.474882] bus: 'platform': add device rtc-test.1
[ 10.474907] PM: Adding info for platform:rtc-test.1
[ 10.475200] bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test
[ 10.475204] bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1
[ 10.475233] device: 'rtc2': device_add
[ 10.475293] PM: Adding info for No Bus:rtc2
[ 10.475582] rtc-test rtc-test.1: rtc core: registered test as rtc2
[ 10.475588] driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test'
[ 10.475592] bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test
[ 10.475602] initcall test_init+0x0/0xb5 returned 0 after 1953 usecs
[ 10.475606] calling wm831x_rtc_init+0x0/0x12 @ 1
[ 10.475612] bus: 'platform': add driver wm831x-rtc
[ 10.475888] initcall wm831x_rtc_init+0x0/0x12 returned 0 after 0 usecs
[ 10.475892] calling x1205_init+0x0/0x14 @ 1
[ 10.475898] bus: 'i2c': add driver rtc-x1205
[ 10.476246] i2c-core: driver [rtc-x1205] registered
[ 10.476253] initcall x1205_init+0x0/0x14 returned 0 after 976 usecs
[ 10.476257] calling i2c_dev_init+0x0/0xb6 @ 1
[ 10.476259] i2c /dev entries driver
[ 10.476272] device class 'i2c-dev': registering
[ 10.476535] bus: 'i2c': add driver dev_driver
[ 10.476849] i2c-core: driver [dev_driver] registered
[ 10.476855] initcall i2c_dev_init+0x0/0xb6 returned 0 after 0 usecs
[ 10.476859] calling i2c_ali15x3_init+0x0/0x1b @ 1
[ 10.476882] bus: 'pci': add driver ali15x3_smbus
[ 10.477240] initcall i2c_ali15x3_init+0x0/0x1b returned 0 after 976 usecs
[ 10.477244] calling i2c_amd8111_init+0x0/0x1b @ 1
[ 10.477251] bus: 'pci': add driver amd8111_smbus2
[ 10.477570] initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 usecs
[ 10.477573] calling nforce2_init+0x0/0x1b @ 1
[ 10.477580] bus: 'pci': add driver nForce2_smbus
[ 10.477603] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[ 10.477608] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[ 10.477773] device: 'i2c-0': device_add
[ 10.477795] bus: 'i2c': add device i2c-0
[ 10.477827] PM: Adding info for i2c:i2c-0
[ 10.478153] i2c i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
[ 10.478183] i2c i2c-0: found normal entry for adapter 0, addr 0x69
[ 10.478328] device: 'serio0': device_add
[ 10.478364] bus: 'serio': add device serio0
[ 10.478415] PM: Adding info for serio:serio0
[ 10.478845] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[ 10.478856] bus: 'serio': really_probe: probing driver atkbd with device serio0
[ 10.480095] i2c i2c-0: Transaction failed (0x10)!
[ 10.480167] device: 'i2c-0': device_add
[ 10.480513] PM: Adding info for No Bus:i2c-0
[ 10.480950] i2c-dev: adapter [SMBus nForce2 adapter at 4c00] registered as minor 0
[ 10.480956] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 10.480980] device: 'i2c-1': device_add
[ 10.481019] bus: 'i2c': add device i2c-1
[ 10.481052] PM: Adding info for i2c:i2c-1
[ 10.481340] i2c i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
[ 10.481364] i2c i2c-1: found normal entry for adapter 1, addr 0x69
[ 10.483018] i2c i2c-1: Transaction failed (0x10)!
[ 10.483057] device: 'i2c-1': device_add
[ 10.483338] PM: Adding info for No Bus:i2c-1
[ 10.483670] i2c-dev: adapter [SMBus nForce2 adapter at 4c40] registered as minor 1
[ 10.483675] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 10.483678] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[ 10.483684] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[ 10.484100] initcall nforce2_init+0x0/0x1b returned 0 after 6835 usecs
[ 10.484104] calling i2c_sis5595_init+0x0/0x1b @ 1
[ 10.484124] bus: 'pci': add driver sis5595_smbus
[ 10.484468] initcall i2c_sis5595_init+0x0/0x1b returned 0 after 0 usecs
[ 10.484472] calling i2c_sis630_init+0x0/0x1b @ 1
[ 10.484479] bus: 'pci': add driver sis630_smbus
[ 10.488156] initcall i2c_sis630_init+0x0/0x1b returned 0 after 3906 usecs
[ 10.488160] calling i2c_sis96x_init+0x0/0x1b @ 1
[ 10.488169] bus: 'pci': add driver sis96x_smbus
[ 10.488479] initcall i2c_sis96x_init+0x0/0x1b returned 0 after 0 usecs
[ 10.488482] calling i2c_vt586b_init+0x0/0x1b @ 1
[ 10.488489] bus: 'pci': add driver vt586b_smbus
[ 10.488837] initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 usecs
[ 10.488841] calling i2c_vt596_init+0x0/0x1b @ 1
[ 10.488848] bus: 'pci': add driver vt596_smbus
[ 10.489252] initcall i2c_vt596_init+0x0/0x1b returned 0 after 976 usecs
[ 10.489256] calling ocores_i2c_init+0x0/0x12 @ 1
[ 10.489264] bus: 'platform': add driver ocores-i2c
[ 10.489559] initcall ocores_i2c_init+0x0/0x12 returned 0 after 0 usecs
[ 10.489562] calling i2c_parport_init+0x0/0x46 @ 1
[ 10.489564] i2c-parport: adapter type unspecified
[ 10.489568] initcall i2c_parport_init+0x0/0x46 returned -19 after 0 usecs
[ 10.489572] calling i2c_parport_init+0x0/0x14b @ 1
[ 10.489574] i2c-parport-light: adapter type unspecified
[ 10.489577] initcall i2c_parport_init+0x0/0x14b returned -19 after 0 usecs
[ 10.489581] calling taos_init+0x0/0x1b @ 1
[ 10.489586] bus: 'serio': add driver taos-evm
[ 10.489871] initcall taos_init+0x0/0x1b returned 0 after 0 usecs
[ 10.489875] calling tsl2550_init+0x0/0x14 @ 1
[ 10.489882] bus: 'i2c': add driver tsl2550
[ 10.491613] i2c-core: driver [tsl2550] registered
[ 10.491613] initcall tsl2550_init+0x0/0x14 returned 0 after 1953 usecs
[ 10.491613] calling videodev_init+0x0/0x89 @ 1
[ 10.491613] Linux video capture interface: v2.00
[ 10.491613] device class 'video4linux': registering
[ 10.492111] initcall videodev_init+0x0/0x89 returned 0 after 976 usecs
[ 10.492115] calling dabusb_init+0x0/0x106 @ 1
[ 10.492308] bus: 'usb': add driver dabusb
[ 10.492614] usbcore: registered new interface driver dabusb
[ 10.492617] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
[ 10.492621] initcall dabusb_init+0x0/0x106 returned 0 after 0 usecs
[ 10.492625] calling v4l2_i2c_drv_init+0x0/0x6d @ 1
[ 10.492631] bus: 'i2c': add driver au8522
[ 10.492930] i2c-core: driver [au8522] registered
[ 10.492938] initcall v4l2_i2c_drv_init+0x0/0x6d returned 0 after 0 usecs
[ 10.492943] calling flexcop_module_init+0x0/0x16 @ 1
[ 10.492945] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 10.492949] initcall flexcop_module_init+0x0/0x16 returned 0 after 0 usecs
[ 10.492953] calling flexcop_pci_module_init+0x0/0x1b @ 1
[ 10.492973] bus: 'pci': add driver b2c2_flexcop_pci
[ 10.493412] initcall flexcop_pci_module_init+0x0/0x1b returned 0 after 976 usecs
[ 10.493416] calling flexcop_usb_module_init+0x0/0x3a @ 1
[ 10.493424] bus: 'usb': add driver b2c2_flexcop_usb
[ 10.493711] usbcore: registered new interface driver b2c2_flexcop_usb
[ 10.493716] initcall flexcop_usb_module_init+0x0/0x3a returned 0 after 0 usecs
[ 10.493720] calling pluto2_init+0x0/0x1b @ 1
[ 10.493730] bus: 'pci': add driver pluto2
[ 10.494061] initcall pluto2_init+0x0/0x1b returned 0 after 976 usecs
[ 10.494065] calling smscore_module_init+0x0/0x7b @ 1
[ 10.494069] initcall smscore_module_init+0x0/0x7b returned 0 after 0 usecs
[ 10.494073] calling smsdvb_module_init+0x0/0x6b @ 1
[ 10.494141] initcall smsdvb_module_init+0x0/0x6b returned 0 after 0 usecs
[ 10.494145] calling smsusb_module_init+0x0/0x64 @ 1
[ 10.494153] bus: 'usb': add driver smsusb
[ 10.498164] usbcore: registered new interface driver smsusb
[ 10.498169] initcall smsusb_module_init+0x0/0x64 returned 0 after 3906 usecs
[ 10.498173] calling dm1105_init+0x0/0x1b @ 1
[ 10.498187] bus: 'pci': add driver dm1105
[ 10.498562] initcall dm1105_init+0x0/0x1b returned 0 after 0 usecs
[ 10.498566] calling pt1_init+0x0/0x1b @ 1
[ 10.498574] bus: 'pci': add driver earth-pt1
[ 10.498893] initcall pt1_init+0x0/0x1b returned 0 after 0 usecs
[ 10.498897] calling w1_init+0x0/0xa4 @ 1
[ 10.498899] Driver for 1-wire Dallas network protocol.
[ 10.499246] bus: 'w1': registered
[ 10.499249] bus: 'w1': add driver w1_master_driver
[ 10.499520] bus: 'w1': add driver w1_slave_driver
[ 10.499825] initcall w1_init+0x0/0xa4 returned 0 after 976 usecs
[ 10.499830] calling matrox_w1_init+0x0/0x1b @ 1
[ 10.499841] bus: 'pci': add driver matrox_w1
[ 10.501570] device: 'input1': device_add
[ 10.501570] PM: Adding info for No Bus:input1
[ 10.502314] initcall matrox_w1_init+0x0/0x1b returned 0 after 2929 usecs
[ 10.502318] calling sensors_ds2482_init+0x0/0x14 @ 1
[ 10.502325] bus: 'i2c': add driver ds2482
[ 10.502617] input: AT Translated Set 2 keyboard as /class/input/input1
[ 10.502761] device: 'event1': device_add
[ 10.503098] PM: Adding info for No Bus:event1
[ 10.503469] i2c-core: driver [ds2482] registered
[ 10.503482] initcall sensors_ds2482_init+0x0/0x14 returned 0 after 976 usecs
[ 10.503487] calling w1_ds2760_init+0x0/0x2c @ 1
[ 10.503489] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 10.503546] initcall w1_ds2760_init+0x0/0x2c returned 0 after 0 usecs
[ 10.503550] calling w1_bq27000_init+0x0/0x22 @ 1
[ 10.503555] initcall w1_bq27000_init+0x0/0x22 returned 0 after 0 usecs
[ 10.503559] calling pda_power_init+0x0/0x12 @ 1
[ 10.503569] bus: 'platform': add driver pda-power
[ 10.503868] evbug.c: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 10.503876] driver: 'serio0': driver_bound: bound to device 'atkbd'
[ 10.503881] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[ 10.503939] device: 'serio1': device_add
[ 10.503951] bus: 'serio': add device serio1
[ 10.504074] PM: Adding info for serio:serio1
[ 10.504348] initcall pda_power_init+0x0/0x12 returned 0 after 976 usecs
[ 10.504352] calling wm831x_backup_init+0x0/0x12 @ 1
[ 10.504357] bus: 'platform': add driver wm831x-backup
[ 10.504637] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[ 10.504642] bus: 'serio': really_probe: probing driver atkbd with device serio1
[ 10.509574] initcall wm831x_backup_init+0x0/0x12 returned 0 after 4882 usecs
[ 10.509574] calling ds2760_battery_init+0x0/0x12 @ 1
[ 10.509574] bus: 'platform': add driver ds2760-battery
[ 10.510055] initcall ds2760_battery_init+0x0/0x12 returned 0 after 976 usecs
[ 10.510059] calling ds2782_init+0x0/0x14 @ 1
[ 10.510066] bus: 'i2c': add driver ds2782-battery
[ 10.510332] i2c-core: driver [ds2782-battery] registered
[ 10.510341] initcall ds2782_init+0x0/0x14 returned 0 after 0 usecs
[ 10.510344] calling asb100_init+0x0/0x14 @ 1
[ 10.510348] bus: 'i2c': add driver asb100
[ 10.510640] i2c-core: driver [asb100] registered
[ 10.510651] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.511388] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[ 10.511392] bus: 'serio': really_probe: probing driver atkbd with device serio1
[ 10.512068] i2c i2c-0: Transaction failed (0x10)!
[ 10.512083] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.514016] i2c i2c-1: Transaction failed (0x10)!
[ 10.514028] initcall asb100_init+0x0/0x14 returned 0 after 3906 usecs
[ 10.514032] calling sensors_w83792d_init+0x0/0x14 @ 1
[ 10.514037] bus: 'i2c': add driver w83792d
[ 10.514306] i2c-core: driver [w83792d] registered
[ 10.514316] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.516063] i2c i2c-0: Transaction failed (0x10)!
[ 10.516065] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.518017] i2c i2c-0: Transaction failed (0x10)!
[ 10.518020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.520056] i2c i2c-0: Transaction failed (0x10)!
[ 10.520058] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.522021] i2c i2c-0: Transaction failed (0x10)!
[ 10.522036] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.524057] i2c i2c-1: Transaction failed (0x10)!
[ 10.524059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.526016] i2c i2c-1: Transaction failed (0x10)!
[ 10.526018] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.528056] i2c i2c-1: Transaction failed (0x10)!
[ 10.528059] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.530016] i2c i2c-1: Transaction failed (0x10)!
[ 10.530027] initcall sensors_w83792d_init+0x0/0x14 returned 0 after 15625 usecs
[ 10.530031] calling sensors_w83793_init+0x0/0x14 @ 1
[ 10.530036] bus: 'i2c': add driver w83793
[ 10.530357] i2c-core: driver [w83793] registered
[ 10.530367] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.532062] i2c i2c-0: Transaction failed (0x10)!
[ 10.532064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.534016] i2c i2c-0: Transaction failed (0x10)!
[ 10.534019] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.536056] i2c i2c-0: Transaction failed (0x10)!
[ 10.536058] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.538016] i2c i2c-0: Transaction failed (0x10)!
[ 10.538030] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.540056] i2c i2c-1: Transaction failed (0x10)!
[ 10.540059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.542016] i2c i2c-1: Transaction failed (0x10)!
[ 10.542018] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.544056] i2c i2c-1: Transaction failed (0x10)!
[ 10.544058] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.546016] i2c i2c-1: Transaction failed (0x10)!
[ 10.546027] initcall sensors_w83793_init+0x0/0x14 returned 0 after 15625 usecs
[ 10.546031] calling sensors_w83781d_init+0x0/0x14 @ 1
[ 10.546036] bus: 'i2c': add driver w83781d
[ 10.546280] i2c-core: driver [w83781d] registered
[ 10.546290] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[ 10.548060] i2c i2c-0: Transaction failed (0x10)!
[ 10.548063] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[ 10.550016] i2c i2c-0: Transaction failed (0x10)!
[ 10.550018] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.552056] i2c i2c-0: Transaction failed (0x10)!
[ 10.552059] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.554017] i2c i2c-0: Transaction failed (0x10)!
[ 10.554019] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.556055] i2c i2c-0: Transaction failed (0x10)!
[ 10.556058] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.558017] i2c i2c-0: Transaction failed (0x10)!
[ 10.558019] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.560056] i2c i2c-0: Transaction failed (0x10)!
[ 10.560058] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.562020] i2c i2c-0: Transaction failed (0x10)!
[ 10.562034] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[ 10.564057] i2c i2c-1: Transaction failed (0x10)!
[ 10.564060] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[ 10.566017] i2c i2c-1: Transaction failed (0x10)!
[ 10.566020] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.568057] i2c i2c-1: Transaction failed (0x10)!
[ 10.568060] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.570018] i2c i2c-1: Transaction failed (0x10)!
[ 10.570020] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.572057] i2c i2c-1: Transaction failed (0x10)!
[ 10.572059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.574018] i2c i2c-1: Transaction failed (0x10)!
[ 10.574021] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.576058] i2c i2c-1: Transaction failed (0x10)!
[ 10.576060] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.578018] i2c i2c-1: Transaction failed (0x10)!
[ 10.578029] initcall sensors_w83781d_init+0x0/0x14 returned 0 after 31250 usecs
[ 10.578033] calling sensors_w83791d_init+0x0/0x14 @ 1
[ 10.578038] bus: 'i2c': add driver w83791d
[ 10.578284] i2c-core: driver [w83791d] registered
[ 10.578294] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.580061] i2c i2c-0: Transaction failed (0x10)!
[ 10.580063] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.582017] i2c i2c-0: Transaction failed (0x10)!
[ 10.582020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.584057] i2c i2c-0: Transaction failed (0x10)!
[ 10.584060] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.586017] i2c i2c-0: Transaction failed (0x10)!
[ 10.586031] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.588057] i2c i2c-1: Transaction failed (0x10)!
[ 10.588059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.590017] i2c i2c-1: Transaction failed (0x10)!
[ 10.590020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.592057] i2c i2c-1: Transaction failed (0x10)!
[ 10.592059] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.594017] i2c i2c-1: Transaction failed (0x10)!
[ 10.594028] initcall sensors_w83791d_init+0x0/0x14 returned 0 after 15625 usecs
[ 10.594032] calling ad7414_init+0x0/0x14 @ 1
[ 10.594037] bus: 'i2c': add driver ad7414
[ 10.594301] i2c-core: driver [ad7414] registered
[ 10.594308] initcall ad7414_init+0x0/0x14 returned 0 after 0 usecs
[ 10.594312] calling ad7418_init+0x0/0x14 @ 1
[ 10.594316] bus: 'i2c': add driver ad7418
[ 10.594634] i2c-core: driver [ad7418] registered
[ 10.594642] initcall ad7418_init+0x0/0x14 returned 0 after 0 usecs
[ 10.594646] calling sensors_adm1025_init+0x0/0x14 @ 1
[ 10.594650] bus: 'i2c': add driver adm1025
[ 10.594896] i2c-core: driver [adm1025] registered
[ 10.594906] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.596064] i2c i2c-0: Transaction failed (0x10)!
[ 10.596067] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.598017] i2c i2c-0: Transaction failed (0x10)!
[ 10.598020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.600058] i2c i2c-0: Transaction failed (0x10)!
[ 10.600072] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.602021] i2c i2c-1: Transaction failed (0x10)!
[ 10.602024] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.604057] i2c i2c-1: Transaction failed (0x10)!
[ 10.604059] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.606018] i2c i2c-1: Transaction failed (0x10)!
[ 10.606029] initcall sensors_adm1025_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.606033] calling sm_adm1026_init+0x0/0x14 @ 1
[ 10.606038] bus: 'i2c': add driver adm1026
[ 10.606291] i2c-core: driver [adm1026] registered
[ 10.606301] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.608061] i2c i2c-0: Transaction failed (0x10)!
[ 10.608063] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.610017] i2c i2c-0: Transaction failed (0x10)!
[ 10.610020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.612057] i2c i2c-0: Transaction failed (0x10)!
[ 10.612071] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.614018] i2c i2c-1: Transaction failed (0x10)!
[ 10.614021] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.616057] i2c i2c-1: Transaction failed (0x10)!
[ 10.616059] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.618018] i2c i2c-1: Transaction failed (0x10)!
[ 10.618029] initcall sm_adm1026_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.618033] calling sensors_adm1029_init+0x0/0x14 @ 1
[ 10.618038] bus: 'i2c': add driver adm1029
[ 10.618290] i2c-core: driver [adm1029] registered
[ 10.618299] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[ 10.620061] i2c i2c-0: Transaction failed (0x10)!
[ 10.620064] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[ 10.622017] i2c i2c-0: Transaction failed (0x10)!
[ 10.622020] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.624057] i2c i2c-0: Transaction failed (0x10)!
[ 10.624060] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.626018] i2c i2c-0: Transaction failed (0x10)!
[ 10.626021] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.628057] i2c i2c-0: Transaction failed (0x10)!
[ 10.628059] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.630017] i2c i2c-0: Transaction failed (0x10)!
[ 10.630020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.632057] i2c i2c-0: Transaction failed (0x10)!
[ 10.632060] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.634018] i2c i2c-0: Transaction failed (0x10)!
[ 10.634032] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[ 10.636057] i2c i2c-1: Transaction failed (0x10)!
[ 10.636059] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[ 10.638017] i2c i2c-1: Transaction failed (0x10)!
[ 10.638020] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.640057] i2c i2c-1: Transaction failed (0x10)!
[ 10.640059] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.642021] i2c i2c-1: Transaction failed (0x10)!
[ 10.642024] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.644057] i2c i2c-1: Transaction failed (0x10)!
[ 10.644060] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.646018] i2c i2c-1: Transaction failed (0x10)!
[ 10.646020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.648057] i2c i2c-1: Transaction failed (0x10)!
[ 10.648059] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.650017] i2c i2c-1: Transaction failed (0x10)!
[ 10.650028] initcall sensors_adm1029_init+0x0/0x14 returned 0 after 31250 usecs
[ 10.650032] calling sensors_adm1031_init+0x0/0x14 @ 1
[ 10.650037] bus: 'i2c': add driver adm1031
[ 10.650322] i2c-core: driver [adm1031] registered
[ 10.650332] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.652063] i2c i2c-0: Transaction failed (0x10)!
[ 10.652065] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.654017] i2c i2c-0: Transaction failed (0x10)!
[ 10.654020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.656057] i2c i2c-0: Transaction failed (0x10)!
[ 10.656071] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.658018] i2c i2c-1: Transaction failed (0x10)!
[ 10.658021] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.660058] i2c i2c-1: Transaction failed (0x10)!
[ 10.660060] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.662017] i2c i2c-1: Transaction failed (0x10)!
[ 10.662028] initcall sensors_adm1031_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.662032] calling adt7462_init+0x0/0x14 @ 1
[ 10.662037] bus: 'i2c': add driver adt7462
[ 10.662301] i2c-core: driver [adt7462] registered
[ 10.662311] i2c i2c-0: found normal entry for adapter 0, addr 0x58
[ 10.664060] i2c i2c-0: Transaction failed (0x10)!
[ 10.664063] i2c i2c-0: found normal entry for adapter 0, addr 0x5c
[ 10.666018] i2c i2c-0: Transaction failed (0x10)!
[ 10.666032] i2c i2c-1: found normal entry for adapter 1, addr 0x58
[ 10.668057] i2c i2c-1: Transaction failed (0x10)!
[ 10.668059] i2c i2c-1: found normal entry for adapter 1, addr 0x5c
[ 10.670017] i2c i2c-1: Transaction failed (0x10)!
[ 10.670028] initcall adt7462_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.670032] calling adt7470_init+0x0/0x14 @ 1
[ 10.670037] bus: 'i2c': add driver adt7470
[ 10.670291] i2c-core: driver [adt7470] registered
[ 10.670301] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.672061] i2c i2c-0: Transaction failed (0x10)!
[ 10.672063] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.674017] i2c i2c-0: Transaction failed (0x10)!
[ 10.674020] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.676058] i2c i2c-0: Transaction failed (0x10)!
[ 10.676071] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.678017] i2c i2c-1: Transaction failed (0x10)!
[ 10.678020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.680057] i2c i2c-1: Transaction failed (0x10)!
[ 10.680060] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.682021] i2c i2c-1: Transaction failed (0x10)!
[ 10.682032] initcall adt7470_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.682036] calling adt7473_init+0x0/0x22 @ 1
[ 10.682037] The adt7473 driver is deprecated, please use the adt7475 driver instead
[ 10.682042] bus: 'i2c': add driver adt7473
[ 10.682295] i2c-core: driver [adt7473] registered
[ 10.682305] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.684062] i2c i2c-0: Transaction failed (0x10)!
[ 10.684064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.686018] i2c i2c-0: Transaction failed (0x10)!
[ 10.686021] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.688056] i2c i2c-0: Transaction failed (0x10)!
[ 10.688070] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.690017] i2c i2c-1: Transaction failed (0x10)!
[ 10.690020] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.692057] i2c i2c-1: Transaction failed (0x10)!
[ 10.692060] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.694018] i2c i2c-1: Transaction failed (0x10)!
[ 10.694029] initcall adt7473_init+0x0/0x22 returned 0 after 11718 usecs
[ 10.694033] calling sensors_adt7475_init+0x0/0x14 @ 1
[ 10.694038] bus: 'i2c': add driver adt7475
[ 10.694322] i2c-core: driver [adt7475] registered
[ 10.694332] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.696061] i2c i2c-0: Transaction failed (0x10)!
[ 10.696064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.698017] i2c i2c-0: Transaction failed (0x10)!
[ 10.698020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.700058] i2c i2c-0: Transaction failed (0x10)!
[ 10.700072] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.702018] i2c i2c-1: Transaction failed (0x10)!
[ 10.702021] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.704081] i2c i2c-1: Transaction failed (0x10)!
[ 10.704083] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.706017] i2c i2c-1: Transaction failed (0x10)!
[ 10.706029] initcall sensors_adt7475_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.706033] calling applesmc_init+0x0/0x438 @ 1
[ 10.706039] applesmc: supported laptop not found!
[ 10.706041] applesmc: driver init failed (ret=-19)!
[ 10.706045] initcall applesmc_init+0x0/0x438 returned -19 after 0 usecs
[ 10.706048] calling atxp1_init+0x0/0x14 @ 1
[ 10.706053] bus: 'i2c': add driver atxp1
[ 10.706298] i2c-core: driver [atxp1] registered
[ 10.706308] i2c i2c-0: found normal entry for adapter 0, addr 0x37
[ 10.708061] i2c i2c-0: Transaction failed (0x10)!
[ 10.708064] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[ 10.710017] i2c i2c-0: Transaction failed (0x10)!
[ 10.710031] i2c i2c-1: found normal entry for adapter 1, addr 0x37
[ 10.712057] i2c i2c-1: Transaction failed (0x10)!
[ 10.712059] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[ 10.714018] i2c i2c-1: Transaction failed (0x10)!
[ 10.714029] initcall atxp1_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.714033] calling coretemp_init+0x0/0x1a1 @ 1
[ 10.714036] initcall coretemp_init+0x0/0x1a1 returned -19 after 0 usecs
[ 10.714040] calling dme1737_init+0x0/0xb8 @ 1
[ 10.714045] bus: 'i2c': add driver dme1737
[ 10.714304] i2c-core: driver [dme1737] registered
[ 10.714314] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.716061] i2c i2c-0: Transaction failed (0x10)!
[ 10.716063] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.718018] i2c i2c-0: Transaction failed (0x10)!
[ 10.718020] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.720058] i2c i2c-0: Transaction failed (0x10)!
[ 10.720072] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.722021] i2c i2c-1: Transaction failed (0x10)!
[ 10.722024] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.724057] i2c i2c-1: Transaction failed (0x10)!
[ 10.724059] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.726018] i2c i2c-1: Transaction failed (0x10)!
[ 10.726046] initcall dme1737_init+0x0/0xb8 returned 0 after 11718 usecs
[ 10.726050] calling f71882fg_init+0x0/0x85 @ 1
[ 10.726063] f71882fg: Not a Fintek device
[ 10.726079] f71882fg: Not a Fintek device
[ 10.726084] initcall f71882fg_init+0x0/0x85 returned -19 after 0 usecs
[ 10.726087] calling sensors_f75375_init+0x0/0x14 @ 1
[ 10.726092] bus: 'i2c': add driver f75375
[ 10.726336] i2c-core: driver [f75375] registered
[ 10.726346] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.728061] i2c i2c-0: Transaction failed (0x10)!
[ 10.728064] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.730017] i2c i2c-0: Transaction failed (0x10)!
[ 10.730031] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.732057] i2c i2c-1: Transaction failed (0x10)!
[ 10.732060] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.734018] i2c i2c-1: Transaction failed (0x10)!
[ 10.734029] initcall sensors_f75375_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.734033] calling fschmd_init+0x0/0x14 @ 1
[ 10.734037] bus: 'i2c': add driver fschmd
[ 10.734367] i2c-core: driver [fschmd] registered
[ 10.734377] i2c i2c-0: found normal entry for adapter 0, addr 0x73
[ 10.736063] i2c i2c-0: Transaction failed (0x10)!
[ 10.736077] i2c i2c-1: found normal entry for adapter 1, addr 0x73
[ 10.738018] i2c i2c-1: Transaction failed (0x10)!
[ 10.738029] initcall fschmd_init+0x0/0x14 returned 0 after 3906 usecs
[ 10.738033] calling g760a_init+0x0/0x14 @ 1
[ 10.738038] bus: 'i2c': add driver g760a
[ 10.738293] i2c-core: driver [g760a] registered
[ 10.738301] initcall g760a_init+0x0/0x14 returned 0 after 0 usecs
[ 10.738305] calling sensors_gl518sm_init+0x0/0x14 @ 1
[ 10.738309] bus: 'i2c': add driver gl518sm
[ 10.738588] i2c-core: driver [gl518sm] registered
[ 10.738598] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.740062] i2c i2c-0: Transaction failed (0x10)!
[ 10.740064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.742018] i2c i2c-0: Transaction failed (0x10)!
[ 10.742032] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.744057] i2c i2c-1: Transaction failed (0x10)!
[ 10.744059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.746018] i2c i2c-1: Transaction failed (0x10)!
[ 10.746029] initcall sensors_gl518sm_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.746033] calling sensors_gl520sm_init+0x0/0x14 @ 1
[ 10.746038] bus: 'i2c': add driver gl520sm
[ 10.746294] i2c-core: driver [gl520sm] registered
[ 10.746304] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.748061] i2c i2c-0: Transaction failed (0x10)!
[ 10.748064] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.750019] i2c i2c-0: Transaction failed (0x10)!
[ 10.750033] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.752057] i2c i2c-1: Transaction failed (0x10)!
[ 10.752059] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.754018] i2c i2c-1: Transaction failed (0x10)!
[ 10.754029] initcall sensors_gl520sm_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.754033] calling ibmpex_init+0x0/0x12 @ 1
[ 10.754040] initcall ibmpex_init+0x0/0x12 returned 0 after 0 usecs
[ 10.754044] calling sm_it87_init+0x0/0x68 @ 1
[ 10.754080] it87: Found IT8712F chip at 0x290, revision 7
[ 10.754089] it87: VID is disabled (pins used for GPIO)
[ 10.754097] it87: in3 is VCC (+5V)
[ 10.754099] it87: in7 is VCCH (+5V Stand-By)
[ 10.754113] bus: 'platform': add driver it87
[ 10.754442] Registering platform device 'it87.656'. Parent at platform
[ 10.754447] device: 'it87.656': device_add
[ 10.754462] bus: 'platform': add device it87.656
[ 10.754492] PM: Adding info for platform:it87.656
[ 10.754815] bus: 'platform': driver_probe_device: matched device it87.656 with driver it87
[ 10.754821] bus: 'platform': really_probe: probing driver it87 with device it87.656
[ 10.754875] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[ 10.755456] device: 'hwmon0': device_add
[ 10.755500] PM: Adding info for No Bus:hwmon0
[ 10.755793] driver: 'it87.656': driver_bound: bound to device 'it87'
[ 10.755797] bus: 'platform': really_probe: bound device it87.656 to driver it87
[ 10.755809] initcall sm_it87_init+0x0/0x68 returned 0 after 976 usecs
[ 10.755814] calling k8temp_init+0x0/0x1b @ 1
[ 10.755836] bus: 'pci': add driver k8temp
[ 10.755912] bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k8temp
[ 10.755916] bus: 'pci': really_probe: probing driver k8temp with device 0000:00:18.3
[ 10.755983] device: 'hwmon1': device_add
[ 10.756090] PM: Adding info for No Bus:hwmon1
[ 10.756376] driver: '0000:00:18.3': driver_bound: bound to device 'k8temp'
[ 10.756383] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k8temp
[ 10.756692] initcall k8temp_init+0x0/0x1b returned 0 after 976 usecs
[ 10.756696] calling k10temp_init+0x0/0x1b @ 1
[ 10.756708] bus: 'pci': add driver k10temp
[ 10.757043] initcall k10temp_init+0x0/0x1b returned 0 after 976 usecs
[ 10.757047] calling lis3lv02d_init+0x0/0x14 @ 1
[ 10.757055] bus: 'i2c': add driver lis3lv02d_i2c
[ 10.757325] i2c-core: driver [lis3lv02d_i2c] registered
[ 10.757334] initcall lis3lv02d_init+0x0/0x14 returned 0 after 0 usecs
[ 10.757338] calling sensors_lm63_init+0x0/0x14 @ 1
[ 10.757342] bus: 'i2c': add driver lm63
[ 10.757619] i2c-core: driver [lm63] registered
[ 10.757630] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 10.759020] i2c i2c-0: Transaction failed (0x10)!
[ 10.759035] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[ 10.761016] i2c i2c-1: Transaction failed (0x10)!
[ 10.761029] initcall sensors_lm63_init+0x0/0x14 returned 0 after 3906 usecs
[ 10.761033] calling sensors_lm80_init+0x0/0x14 @ 1
[ 10.761038] bus: 'i2c': add driver lm80
[ 10.761320] i2c-core: driver [lm80] registered
[ 10.761331] i2c i2c-0: found normal entry for adapter 0, addr 0x28
[ 10.763016] i2c i2c-0: Transaction failed (0x10)!
[ 10.763019] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[ 10.765021] i2c i2c-0: Transaction failed (0x10)!
[ 10.765024] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.767016] i2c i2c-0: Transaction failed (0x10)!
[ 10.767018] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.769017] i2c i2c-0: Transaction failed (0x10)!
[ 10.769019] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.771016] i2c i2c-0: Transaction failed (0x10)!
[ 10.771019] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.773016] i2c i2c-0: Transaction failed (0x10)!
[ 10.773019] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.775019] i2c i2c-0: Transaction failed (0x10)!
[ 10.775022] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.777017] i2c i2c-0: Transaction failed (0x10)!
[ 10.777031] i2c i2c-1: found normal entry for adapter 1, addr 0x28
[ 10.779016] i2c i2c-1: Transaction failed (0x10)!
[ 10.779018] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[ 10.781016] i2c i2c-1: Transaction failed (0x10)!
[ 10.781019] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.783016] i2c i2c-1: Transaction failed (0x10)!
[ 10.783019] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.785019] i2c i2c-1: Transaction failed (0x10)!
[ 10.785022] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.787016] i2c i2c-1: Transaction failed (0x10)!
[ 10.787018] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.789016] i2c i2c-1: Transaction failed (0x10)!
[ 10.789018] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.791016] i2c i2c-1: Transaction failed (0x10)!
[ 10.791018] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.793016] i2c i2c-1: Transaction failed (0x10)!
[ 10.793029] initcall sensors_lm80_init+0x0/0x14 returned 0 after 31250 usecs
[ 10.793033] calling sensors_lm83_init+0x0/0x14 @ 1
[ 10.793038] bus: 'i2c': add driver lm83
[ 10.793305] i2c-core: driver [lm83] registered
[ 10.793315] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[ 10.795020] i2c i2c-0: Transaction failed (0x10)!
[ 10.795023] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[ 10.797016] i2c i2c-0: Transaction failed (0x10)!
[ 10.797019] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[ 10.799017] i2c i2c-0: Transaction failed (0x10)!
[ 10.799019] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[ 10.801016] i2c i2c-0: Transaction failed (0x10)!
[ 10.801018] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.803017] i2c i2c-0: Transaction failed (0x10)!
[ 10.803019] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.805020] i2c i2c-0: Transaction failed (0x10)!
[ 10.805022] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 10.807017] i2c i2c-0: Transaction failed (0x10)!
[ 10.807019] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[ 10.809017] i2c i2c-0: Transaction failed (0x10)!
[ 10.809019] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[ 10.811016] i2c i2c-0: Transaction failed (0x10)!
[ 10.811031] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[ 10.813017] i2c i2c-1: Transaction failed (0x10)!
[ 10.813019] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[ 10.815019] i2c i2c-1: Transaction failed (0x10)!
[ 10.815022] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[ 10.817016] i2c i2c-1: Transaction failed (0x10)!
[ 10.817018] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[ 10.819018] i2c i2c-1: Transaction failed (0x10)!
[ 10.819021] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.821018] i2c i2c-1: Transaction failed (0x10)!
[ 10.821021] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.823023] i2c i2c-1: Transaction failed (0x10)!
[ 10.823026] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[ 10.825021] i2c i2c-1: Transaction failed (0x10)!
[ 10.825024] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[ 10.827018] i2c i2c-1: Transaction failed (0x10)!
[ 10.827020] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[ 10.829018] i2c i2c-1: Transaction failed (0x10)!
[ 10.829030] initcall sensors_lm83_init+0x0/0x14 returned 0 after 35156 usecs
[ 10.829034] calling sm_lm85_init+0x0/0x14 @ 1
[ 10.829039] bus: 'i2c': add driver lm85
[ 10.829302] i2c-core: driver [lm85] registered
[ 10.829312] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.831018] i2c i2c-0: Transaction failed (0x10)!
[ 10.831021] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.833018] i2c i2c-0: Transaction failed (0x10)!
[ 10.833021] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.835021] i2c i2c-0: Transaction failed (0x10)!
[ 10.835036] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.837018] i2c i2c-1: Transaction failed (0x10)!
[ 10.837020] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.839017] i2c i2c-1: Transaction failed (0x10)!
[ 10.839020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.841018] i2c i2c-1: Transaction failed (0x10)!
[ 10.841029] initcall sm_lm85_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.841033] calling sensors_lm87_init+0x0/0x14 @ 1
[ 10.841038] bus: 'i2c': add driver lm87
[ 10.841283] i2c-core: driver [lm87] registered
[ 10.841293] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.843018] i2c i2c-0: Transaction failed (0x10)!
[ 10.843020] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.845021] i2c i2c-0: Transaction failed (0x10)!
[ 10.845023] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.847017] i2c i2c-0: Transaction failed (0x10)!
[ 10.847032] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.849018] i2c i2c-1: Transaction failed (0x10)!
[ 10.849021] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.851017] i2c i2c-1: Transaction failed (0x10)!
[ 10.851020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.853018] i2c i2c-1: Transaction failed (0x10)!
[ 10.853030] initcall sensors_lm87_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.853034] calling sensors_lm95241_init+0x0/0x14 @ 1
[ 10.853039] bus: 'i2c': add driver lm95241
[ 10.853333] i2c-core: driver [lm95241] registered
[ 10.853343] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[ 10.855021] i2c i2c-0: Transaction failed (0x10)!
[ 10.855024] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.857017] i2c i2c-0: Transaction failed (0x10)!
[ 10.857020] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.859018] i2c i2c-0: Transaction failed (0x10)!
[ 10.859032] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[ 10.861018] i2c i2c-1: Transaction failed (0x10)!
[ 10.861021] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.863017] i2c i2c-1: Transaction failed (0x10)!
[ 10.863020] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.865021] i2c i2c-1: Transaction failed (0x10)!
[ 10.865034] initcall sensors_lm95241_init+0x0/0x14 returned 0 after 11718 usecs
[ 10.865038] calling ltc4245_init+0x0/0x14 @ 1
[ 10.865043] bus: 'i2c': add driver ltc4245
[ 10.865307] i2c-core: driver [ltc4245] registered
[ 10.865315] initcall ltc4245_init+0x0/0x14 returned 0 after 0 usecs
[ 10.865319] calling sensors_max1619_init+0x0/0x14 @ 1
[ 10.865324] bus: 'i2c': add driver max1619
[ 10.865625] i2c-core: driver [max1619] registered
[ 10.865635] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[ 10.867018] i2c i2c-0: Transaction failed (0x10)!
[ 10.867020] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[ 10.869017] i2c i2c-0: Transaction failed (0x10)!
[ 10.869020] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[ 10.871017] i2c i2c-0: Transaction failed (0x10)!
[ 10.871020] i2c i2c-0: found normal entry for adapter 0, addr 0x29
[ 10.873018] i2c i2c-0: Transaction failed (0x10)!
[ 10.873021] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.875021] i2c i2c-0: Transaction failed (0x10)!
[ 10.875024] i2c i2c-0: found normal entry for adapter 0, addr 0x2b
[ 10.877018] i2c i2c-0: Transaction failed (0x10)!
[ 10.877021] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 10.879017] i2c i2c-0: Transaction failed (0x10)!
[ 10.879020] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[ 10.881018] i2c i2c-0: Transaction failed (0x10)!
[ 10.881020] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[ 10.883018] i2c i2c-0: Transaction failed (0x10)!
[ 10.883033] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[ 10.885021] i2c i2c-1: Transaction failed (0x10)!
[ 10.885024] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[ 10.887017] i2c i2c-1: Transaction failed (0x10)!
[ 10.887020] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[ 10.889018] i2c i2c-1: Transaction failed (0x10)!
[ 10.889021] i2c i2c-1: found normal entry for adapter 1, addr 0x29
[ 10.891017] i2c i2c-1: Transaction failed (0x10)!
[ 10.891020] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.893017] i2c i2c-1: Transaction failed (0x10)!
[ 10.893020] i2c i2c-1: found normal entry for adapter 1, addr 0x2b
[ 10.895020] i2c i2c-1: Transaction failed (0x10)!
[ 10.895023] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[ 10.897018] i2c i2c-1: Transaction failed (0x10)!
[ 10.897021] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[ 10.899017] i2c i2c-1: Transaction failed (0x10)!
[ 10.899020] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[ 10.901017] i2c i2c-1: Transaction failed (0x10)!
[ 10.901029] initcall sensors_max1619_init+0x0/0x14 returned 0 after 35156 usecs
[ 10.901033] calling pc87360_init+0x0/0xa0 @ 1
[ 10.901052] pc87360: PC8736x not detected, module not inserted.
[ 10.901056] initcall pc87360_init+0x0/0xa0 returned -19 after 0 usecs
[ 10.901059] calling pc87427_init+0x0/0x73 @ 1
[ 10.901079] initcall pc87427_init+0x0/0x73 returned -19 after 0 usecs
[ 10.901083] calling sm_sis5595_init+0x0/0x1b @ 1
[ 10.901103] bus: 'pci': add driver sis5595
[ 10.901427] initcall sm_sis5595_init+0x0/0x1b returned 0 after 0 usecs
[ 10.901430] calling sm_smsc47m1_init+0x0/0x95 @ 1
[ 10.901442] initcall sm_smsc47m1_init+0x0/0x95 returned -19 after 0 usecs
[ 10.901446] calling amc6821_init+0x0/0x14 @ 1
[ 10.901452] bus: 'i2c': add driver amc6821
[ 10.901773] i2c-core: driver [amc6821] registered
[ 10.901783] i2c i2c-0: found normal entry for adapter 0, addr 0x18
[ 10.903018] i2c i2c-0: Transaction failed (0x10)!
[ 10.903021] i2c i2c-0: found normal entry for adapter 0, addr 0x19
[ 10.905021] i2c i2c-0: Transaction failed (0x10)!
[ 10.905024] i2c i2c-0: found normal entry for adapter 0, addr 0x1a
[ 10.907017] i2c i2c-0: Transaction failed (0x10)!
[ 10.907020] i2c i2c-0: found normal entry for adapter 0, addr 0x2c
[ 10.909017] i2c i2c-0: Transaction failed (0x10)!
[ 10.909020] i2c i2c-0: found normal entry for adapter 0, addr 0x2d
[ 10.911018] i2c i2c-0: Transaction failed (0x10)!
[ 10.911021] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.913018] i2c i2c-0: Transaction failed (0x10)!
[ 10.913020] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 10.915020] i2c i2c-0: Transaction failed (0x10)!
[ 10.915023] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[ 10.917017] i2c i2c-0: Transaction failed (0x10)!
[ 10.917020] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[ 10.919017] i2c i2c-0: Transaction failed (0x10)!
[ 10.919032] i2c i2c-1: found normal entry for adapter 1, addr 0x18
[ 10.921018] i2c i2c-1: Transaction failed (0x10)!
[ 10.921020] i2c i2c-1: found normal entry for adapter 1, addr 0x19
[ 10.923022] i2c i2c-1: Transaction failed (0x10)!
[ 10.923025] i2c i2c-1: found normal entry for adapter 1, addr 0x1a
[ 10.925021] i2c i2c-1: Transaction failed (0x10)!
[ 10.925024] i2c i2c-1: found normal entry for adapter 1, addr 0x2c
[ 10.927017] i2c i2c-1: Transaction failed (0x10)!
[ 10.927020] i2c i2c-1: found normal entry for adapter 1, addr 0x2d
[ 10.929018] i2c i2c-1: Transaction failed (0x10)!
[ 10.929020] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.931017] i2c i2c-1: Transaction failed (0x10)!
[ 10.931020] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[ 10.933017] i2c i2c-1: Transaction failed (0x10)!
[ 10.933020] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[ 10.935021] i2c i2c-1: Transaction failed (0x10)!
[ 10.935023] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[ 10.937018] i2c i2c-1: Transaction failed (0x10)!
[ 10.937031] initcall amc6821_init+0x0/0x14 returned 0 after 35156 usecs
[ 10.937034] calling tmp421_init+0x0/0x14 @ 1
[ 10.937039] bus: 'i2c': add driver tmp421
[ 10.937285] i2c-core: driver [tmp421] registered
[ 10.937295] i2c i2c-0: found normal entry for adapter 0, addr 0x2a
[ 10.939019] i2c i2c-0: Transaction failed (0x10)!
[ 10.939021] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 10.941017] i2c i2c-0: Transaction failed (0x10)!
[ 10.941020] i2c i2c-0: found normal entry for adapter 0, addr 0x4d
[ 10.943017] i2c i2c-0: Transaction failed (0x10)!
[ 10.943020] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
[ 10.945022] i2c i2c-0: Transaction failed (0x10)!
[ 10.945024] i2c i2c-0: found normal entry for adapter 0, addr 0x4f
[ 10.947018] i2c i2c-0: Transaction failed (0x10)!
[ 10.947033] i2c i2c-1: found normal entry for adapter 1, addr 0x2a
[ 10.949018] i2c i2c-1: Transaction failed (0x10)!
[ 10.949021] i2c i2c-1: found normal entry for adapter 1, addr 0x4c
[ 10.951017] i2c i2c-1: Transaction failed (0x10)!
[ 10.951020] i2c i2c-1: found normal entry for adapter 1, addr 0x4d
[ 10.953017] i2c i2c-1: Transaction failed (0x10)!
[ 10.953020] i2c i2c-1: found normal entry for adapter 1, addr 0x4e
[ 10.955020] i2c i2c-1: Transaction failed (0x10)!
[ 10.955023] i2c i2c-1: found normal entry for adapter 1, addr 0x4f
[ 10.957018] i2c i2c-1: Transaction failed (0x10)!
[ 10.957029] initcall tmp421_init+0x0/0x14 returned 0 after 19531 usecs
[ 10.957033] calling via_cputemp_init+0x0/0x189 @ 1
[ 10.957034] via_cputemp: Not a VIA CPU
[ 10.957038] initcall via_cputemp_init+0x0/0x189 returned -19 after 0 usecs
[ 10.957041] calling vt1211_init+0x0/0xa3 @ 1
[ 10.957064] initcall vt1211_init+0x0/0xa3 returned -19 after 0 usecs
[ 10.957067] calling sensors_w83l785ts_init+0x0/0x14 @ 1
[ 10.957072] bus: 'i2c': add driver w83l785ts
[ 10.957326] i2c-core: driver [w83l785ts] registered
[ 10.957336] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.959018] i2c i2c-0: Transaction failed (0x10)!
[ 10.959033] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.961017] i2c i2c-1: Transaction failed (0x10)!
[ 10.961029] initcall sensors_w83l785ts_init+0x0/0x14 returned 0 after 3906 usecs
[ 10.961032] calling sensors_w83l786ng_init+0x0/0x14 @ 1
[ 10.961037] bus: 'i2c': add driver w83l786ng
[ 10.961281] i2c-core: driver [w83l786ng] registered
[ 10.961291] i2c i2c-0: found normal entry for adapter 0, addr 0x2e
[ 10.963018] i2c i2c-0: Transaction failed (0x10)!
[ 10.963020] i2c i2c-0: found normal entry for adapter 0, addr 0x2f
[ 10.965021] i2c i2c-0: Transaction failed (0x10)!
[ 10.965036] i2c i2c-1: found normal entry for adapter 1, addr 0x2e
[ 10.967018] i2c i2c-1: Transaction failed (0x10)!
[ 10.967021] i2c i2c-1: found normal entry for adapter 1, addr 0x2f
[ 10.969017] i2c i2c-1: Transaction failed (0x10)!
[ 10.969028] initcall sensors_w83l786ng_init+0x0/0x14 returned 0 after 7812 usecs
[ 10.969032] calling wm831x_hwmon_init+0x0/0x12 @ 1
[ 10.969041] bus: 'platform': add driver wm831x-hwmon
[ 10.969365] initcall wm831x_hwmon_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969368] calling telephony_init+0x0/0x51 @ 1
[ 10.969370] Linux telephony interface: v1.00
[ 10.969383] initcall telephony_init+0x0/0x51 returned 0 after 0 usecs
[ 10.969386] calling ixj_init+0x0/0xbd @ 1
[ 10.969410] ixj driver initialized.
[ 10.969439] initcall ixj_init+0x0/0xbd returned 0 after 0 usecs
[ 10.969442] calling ixj_pcmcia_init+0x0/0x12 @ 1
[ 10.969448] bus: 'pcmcia': add driver ixj_cs
[ 10.969746] initcall ixj_pcmcia_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969750] calling raid0_init+0x0/0x12 @ 1
[ 10.969808] md: raid0 personality registered for level 0
[ 10.969811] initcall raid0_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969814] calling raid_init+0x0/0x12 @ 1
[ 10.969817] md: raid1 personality registered for level 1
[ 10.969820] initcall raid_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969823] calling raid5_init+0x0/0x2c @ 1
[ 10.969826] md: raid6 personality registered for level 6
[ 10.969828] md: raid5 personality registered for level 5
[ 10.969831] md: raid4 personality registered for level 4
[ 10.969835] initcall raid5_init+0x0/0x2c returned 0 after 0 usecs
[ 10.969838] calling multipath_init+0x0/0x12 @ 1
[ 10.969841] md: multipath personality registered for level -4
[ 10.969844] initcall multipath_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969847] calling raid_init+0x0/0x12 @ 1
[ 10.969850] md: faulty personality registered for level -5
[ 10.969853] initcall raid_init+0x0/0x12 returned 0 after 0 usecs
[ 10.969856] calling dm_init+0x0/0x46 @ 1
[ 11.033160] device: 'device-mapper': device_add
[ 11.033431] PM: Adding info for No Bus:device-mapper
[ 11.033706] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 11.033712] initcall dm_init+0x0/0x46 returned 0 after 62500 usecs
[ 11.033717] calling dm_crypt_init+0x0/0x69 @ 1
[ 11.034143] initcall dm_crypt_init+0x0/0x69 returned 0 after 976 usecs
[ 11.034146] calling dm_multipath_init+0x0/0x12f @ 1
[ 11.034824] device-mapper: multipath: version 1.1.1 loaded
[ 11.034829] initcall dm_multipath_init+0x0/0x12f returned 0 after 0 usecs
[ 11.034832] calling dm_rr_init+0x0/0x3f @ 1
[ 11.034885] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 11.034889] initcall dm_rr_init+0x0/0x3f returned 0 after 0 usecs
[ 11.034892] calling dm_ql_init+0x0/0x3f @ 1
[ 11.034896] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 11.034899] initcall dm_ql_init+0x0/0x3f returned 0 after 0 usecs
[ 11.034902] calling dm_st_init+0x0/0x3f @ 1
[ 11.034906] device-mapper: multipath service-time: version 0.2.0 loaded
[ 11.034909] initcall dm_st_init+0x0/0x3f returned 0 after 0 usecs
[ 11.034912] calling vhci_init+0x0/0x27 @ 1
[ 11.034914] Bluetooth: Virtual HCI driver ver 1.3
[ 11.034937] device: 'vhci': device_add
[ 11.035221] PM: Adding info for No Bus:vhci
[ 11.035515] initcall vhci_init+0x0/0x27 returned 0 after 976 usecs
[ 11.035519] calling hci_uart_init+0x0/0xd2 @ 1
[ 11.035521] Bluetooth: HCI UART driver ver 2.2
[ 11.035525] Bluetooth: HCI H4 protocol initialized
[ 11.035528] initcall hci_uart_init+0x0/0xd2 returned 0 after 0 usecs
[ 11.035531] calling bcm203x_init+0x0/0x54 @ 1
[ 11.035533] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 11.035547] bus: 'usb': add driver bcm203x
[ 11.035908] usbcore: registered new interface driver bcm203x
[ 11.035911] initcall bcm203x_init+0x0/0x54 returned 0 after 0 usecs
[ 11.035915] calling bpa10x_init+0x0/0x30 @ 1
[ 11.035917] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 11.035922] bus: 'usb': add driver bpa10x
[ 11.036285] usbcore: registered new interface driver bpa10x
[ 11.036290] initcall bpa10x_init+0x0/0x30 returned 0 after 976 usecs
[ 11.036293] calling bfusb_init+0x0/0x55 @ 1
[ 11.036295] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 11.036300] bus: 'usb': add driver bfusb
[ 11.036563] usbcore: registered new interface driver bfusb
[ 11.036567] initcall bfusb_init+0x0/0x55 returned 0 after 0 usecs
[ 11.036570] calling init_bluecard_cs+0x0/0x12 @ 1
[ 11.036577] bus: 'pcmcia': add driver bluecard_cs
[ 11.036837] initcall init_bluecard_cs+0x0/0x12 returned 0 after 0 usecs
[ 11.036840] calling init_btuart_cs+0x0/0x12 @ 1
[ 11.036844] bus: 'pcmcia': add driver btuart_cs
[ 11.037158] initcall init_btuart_cs+0x0/0x12 returned 0 after 976 usecs
[ 11.037162] calling btusb_init+0x0/0x30 @ 1
[ 11.037164] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.037170] bus: 'usb': add driver btusb
[ 11.037440] usbcore: registered new interface driver btusb
[ 11.037443] initcall btusb_init+0x0/0x30 returned 0 after 0 usecs
[ 11.037447] calling ath3k_init+0x0/0x30 @ 1
[ 11.037449] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 11.037454] bus: 'usb': add driver ath3k
[ 11.037719] usbcore: registered new interface driver ath3k
[ 11.037723] initcall ath3k_init+0x0/0x30 returned 0 after 0 usecs
[ 11.037726] calling isdn_init+0x0/0x38d @ 1
[ 11.041231] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2
[ 11.041310] initcall isdn_init+0x0/0x38d returned 0 after 3906 usecs
[ 11.041314] calling kcapi_init+0x0/0xbb @ 1
[ 11.041412] CAPI Subsystem Rev 1.1.2.8
[ 11.041415] initcall kcapi_init+0x0/0xbb returned 0 after 0 usecs
[ 11.041418] calling capi_init+0x0/0x1bd @ 1
[ 11.041433] device class 'capi': registering
[ 11.041840] device: 'capi': device_add
[ 11.042147] PM: Adding info for No Bus:capi
[ 11.042540] device: 'capi0': device_add
[ 11.042980] PM: Adding info for No Bus:capi0
[ 11.043306] device: 'capi1': device_add
[ 11.043704] PM: Adding info for No Bus:capi1
[ 11.044078] device: 'capi2': device_add
[ 11.044479] PM: Adding info for No Bus:capi2
[ 11.044820] device: 'capi3': device_add
[ 11.045260] PM: Adding info for No Bus:capi3
[ 11.045601] device: 'capi4': device_add
[ 11.046026] PM: Adding info for No Bus:capi4
[ 11.046335] device: 'capi5': device_add
[ 11.046732] PM: Adding info for No Bus:capi5
[ 11.047112] device: 'capi6': device_add
[ 11.047529] PM: Adding info for No Bus:capi6
[ 11.047831] device: 'capi7': device_add
[ 11.048305] PM: Adding info for No Bus:capi7
[ 11.048671] device: 'capi8': device_add
[ 11.049103] PM: Adding info for No Bus:capi8
[ 11.049433] device: 'capi9': device_add
[ 11.049845] PM: Adding info for No Bus:capi9
[ 11.050190] device: 'capi10': device_add
[ 11.050607] PM: Adding info for No Bus:capi10
[ 11.050909] device: 'capi11': device_add
[ 11.051338] PM: Adding info for No Bus:capi11
[ 11.051680] device: 'capi12': device_add
[ 11.052170] PM: Adding info for No Bus:capi12
[ 11.052480] device: 'capi13': device_add
[ 11.052885] PM: Adding info for No Bus:capi13
[ 11.053213] device: 'capi14': device_add
[ 11.053616] PM: Adding info for No Bus:capi14
[ 11.053915] device: 'capi15': device_add
[ 11.054348] PM: Adding info for No Bus:capi15
[ 11.054696] device: 'capi16': device_add
[ 11.055138] PM: Adding info for No Bus:capi16
[ 11.055448] device: 'capi17': device_add
[ 11.055852] PM: Adding info for No Bus:capi17
[ 11.056231] device: 'capi18': device_add
[ 11.056647] PM: Adding info for No Bus:capi18
[ 11.056967] device: 'capi19': device_add
[ 11.057396] PM: Adding info for No Bus:capi19
[ 11.057737] device: 'capi20': device_add
[ 11.058171] PM: Adding info for No Bus:capi20
[ 11.058483] device: 'capi21': device_add
[ 11.058896] PM: Adding info for No Bus:capi21
[ 11.059217] device: 'capi22': device_add
[ 11.059622] PM: Adding info for No Bus:capi22
[ 11.059930] device: 'capi23': device_add
[ 11.060430] PM: Adding info for No Bus:capi23
[ 11.060810] device: 'capi24': device_add
[ 11.061260] PM: Adding info for No Bus:capi24
[ 11.061564] device: 'capi25': device_add
[ 11.061970] PM: Adding info for No Bus:capi25
[ 11.062288] device: 'capi26': device_add
[ 11.062695] PM: Adding info for No Bus:capi26
[ 11.063011] device: 'capi27': device_add
[ 11.063429] PM: Adding info for No Bus:capi27
[ 11.063795] device: 'capi28': device_add
[ 11.064286] PM: Adding info for No Bus:capi28
[ 11.064622] device: 'capi29': device_add
[ 11.065067] PM: Adding info for No Bus:capi29
[ 11.065374] device: 'capi30': device_add
[ 11.065791] PM: Adding info for No Bus:capi30
[ 11.066126] device: 'capi31': device_add
[ 11.066536] PM: Adding info for No Bus:capi31
[ 11.066908] capi20: Rev 1.1.2.7: started up with major 68 (no capifs)
[ 11.066916] initcall capi_init+0x0/0x1bd returned 0 after 24414 usecs
[ 11.066919] calling b1pci_init+0x0/0x109 @ 1
[ 11.066941] bus: 'pci': add driver b1pci
[ 11.067344] b1pci: revision 1.1.2.2
[ 11.067348] initcall b1pci_init+0x0/0x109 returned 0 after 976 usecs
[ 11.067351] calling b1_init+0x0/0xa5 @ 1
[ 11.067353] b1: revision 1.1.2.2
[ 11.067356] initcall b1_init+0x0/0xa5 returned 0 after 0 usecs
[ 11.067359] calling b1dma_init+0x0/0xa5 @ 1
[ 11.067361] b1dma: revision 1.1.2.3
[ 11.067364] initcall b1dma_init+0x0/0xa5 returned 0 after 0 usecs
[ 11.067367] calling c4_init+0x0/0x109 @ 1
[ 11.067376] bus: 'pci': add driver c4
[ 11.067686] c4: revision 1.1.2.2
[ 11.067690] initcall c4_init+0x0/0x109 returned 0 after 0 usecs
[ 11.067693] calling divadidd_init+0x0/0x11b @ 1
[ 11.067696] Eicon DIVA - DIDD table (http://www.melware.net)
[ 11.067698] divadidd: Rel:2.0 Rev:1.13.6.4 Build:102-51(local)
[ 11.067755] initcall divadidd_init+0x0/0x11b returned 0 after 0 usecs
[ 11.067758] calling divas_init+0x0/0x184 @ 1
[ 11.067760] Eicon DIVA Server driver (http://www.melware.net)
[ 11.067763] divas: Rel:2.0 Rev:1.55.4.6 Build: 102-52(local)
[ 11.067766] divas: support for: BRI/PCI adapters
[ 11.067798] bus: 'pci': add driver divas
[ 11.068188] divas: started with major 242
[ 11.068192] initcall divas_init+0x0/0x184 returned 0 after 976 usecs
[ 11.068195] calling divacapi_init+0x0/0x10d @ 1
[ 11.068198] Eicon DIVA - CAPI Interface driver (http://www.melware.net)
[ 11.068200] divacapi: Rel:2.0 Rev:1.24 Build: 102-28(local)
[ 11.069946] initcall divacapi_init+0x0/0x10d returned 0 after 976 usecs
[ 11.069950] calling divert_init+0x0/0x64 @ 1
[ 11.069988] dss1_divert module successfully installed
[ 11.069991] initcall divert_init+0x0/0x64 returned 0 after 0 usecs
[ 11.070012] calling gigaset_init_module+0x0/0x29 @ 1
[ 11.070014] gigaset: Driver for Gigaset 307x
[ 11.070017] initcall gigaset_init_module+0x0/0x29 returned 0 after 0 usecs
[ 11.070021] calling ser_gigaset_init+0x0/0xb2 @ 1
[ 11.070035] bus: 'platform': add driver ser_gigaset
[ 11.070585] initcall ser_gigaset_init+0x0/0xb2 returned 0 after 0 usecs
[ 11.070588] calling cpufreq_stats_init+0x0/0xa6 @ 1
[ 11.070610] initcall cpufreq_stats_init+0x0/0xa6 returned 0 after 0 usecs
[ 11.070613] calling cpufreq_gov_powersave_init+0x0/0x12 @ 1
[ 11.070619] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 usecs
[ 11.070623] calling cpufreq_gov_dbs_init+0x0/0xaf @ 1
[ 11.070816] initcall cpufreq_gov_dbs_init+0x0/0xaf returned 0 after 0 usecs
[ 11.070820] calling memstick_init+0x0/0x85 @ 1
[ 11.071236] bus: 'memstick': registered
[ 11.071238] device class 'memstick_host': registering
[ 11.071544] initcall memstick_init+0x0/0x85 returned 0 after 976 usecs
[ 11.071547] calling alix_led_init+0x0/0xd1 @ 1
[ 11.077087] initcall alix_led_init+0x0/0xd1 returned -19 after 5859 usecs
[ 11.077090] calling pca9532_init+0x0/0x14 @ 1
[ 11.077101] bus: 'i2c': add driver pca9532
[ 11.077396] i2c-core: driver [pca9532] registered
[ 11.077405] initcall pca9532_init+0x0/0x14 returned 0 after 0 usecs
[ 11.077408] calling pca955x_leds_init+0x0/0x14 @ 1
[ 11.077413] bus: 'i2c': add driver leds-pca955x
[ 11.077685] i2c-core: driver [leds-pca955x] registered
[ 11.077692] initcall pca955x_leds_init+0x0/0x14 returned 0 after 0 usecs
[ 11.077695] calling da903x_led_init+0x0/0x12 @ 1
[ 11.077705] bus: 'platform': add driver da903x-led
[ 11.078039] initcall da903x_led_init+0x0/0x12 returned 0 after 976 usecs
[ 11.078044] calling wm831x_status_init+0x0/0x12 @ 1
[ 11.078049] bus: 'platform': add driver wm831x-status
[ 11.078310] initcall wm831x_status_init+0x0/0x12 returned 0 after 0 usecs
[ 11.078314] calling adp5520_led_init+0x0/0x12 @ 1
[ 11.078318] bus: 'platform': add driver adp5520-led
[ 11.078577] initcall adp5520_led_init+0x0/0x12 returned 0 after 0 usecs
[ 11.078581] calling heartbeat_trig_init+0x0/0x12 @ 1
[ 11.078650] initcall heartbeat_trig_init+0x0/0x12 returned 0 after 0 usecs
[ 11.078654] calling bl_trig_init+0x0/0x12 @ 1
[ 11.078659] initcall bl_trig_init+0x0/0x12 returned 0 after 0 usecs
[ 11.078662] calling dcdrbu_init+0x0/0x14a @ 1
[ 11.078676] Registering platform device 'dell_rbu'. Parent at platform
[ 11.078681] device: 'dell_rbu': device_add
[ 11.078705] bus: 'platform': add device dell_rbu
[ 11.078735] PM: Adding info for platform:dell_rbu
[ 11.079075] initcall dcdrbu_init+0x0/0x14a returned 0 after 976 usecs
[ 11.079078] calling ibft_init+0x0/0x19b @ 1
[ 11.079097] No iBFT detected.
[ 11.079100] initcall ibft_init+0x0/0x19b returned 0 after 0 usecs
[ 11.079104] calling hifn_init+0x0/0x19 @ 1
[ 11.079105] HIFN supports only 32-bit addresses.
[ 11.079109] initcall hifn_init+0x0/0x19 returned -22 after 0 usecs
[ 11.079112] initcall hifn_init+0x0/0x19 returned with error code -22
[ 11.079115] calling hid_init+0x0/0x66 @ 1
[ 11.079471] bus: 'hid': registered
[ 11.079479] device class 'hidraw': registering
[ 11.079834] initcall hid_init+0x0/0x66 returned 0 after 0 usecs
[ 11.079837] calling a4_init+0x0/0x1b @ 1
[ 11.079841] bus: 'hid': add driver a4tech
[ 11.080199] initcall a4_init+0x0/0x1b returned 0 after 976 usecs
[ 11.080203] calling apple_init+0x0/0x39 @ 1
[ 11.080206] bus: 'hid': add driver apple
[ 11.080467] initcall apple_init+0x0/0x39 returned 0 after 0 usecs
[ 11.080470] calling belkin_init+0x0/0x1b @ 1
[ 11.080474] bus: 'hid': add driver belkin
[ 11.080766] initcall belkin_init+0x0/0x1b returned 0 after 0 usecs
[ 11.080770] calling ch_init+0x0/0x1b @ 1
[ 11.080773] bus: 'hid': add driver cherry
[ 11.081051] initcall ch_init+0x0/0x1b returned 0 after 976 usecs
[ 11.081055] calling ch_init+0x0/0x1b @ 1
[ 11.081058] bus: 'hid': add driver chicony
[ 11.081323] initcall ch_init+0x0/0x1b returned 0 after 0 usecs
[ 11.081326] calling cp_init+0x0/0x1b @ 1
[ 11.081329] bus: 'hid': add driver cypress
[ 11.081594] initcall cp_init+0x0/0x1b returned 0 after 0 usecs
[ 11.081597] calling dr_init+0x0/0x1b @ 1
[ 11.081601] bus: 'hid': add driver dragonrise
[ 11.081903] initcall dr_init+0x0/0x1b returned 0 after 0 usecs
[ 11.081906] calling ez_init+0x0/0x1b @ 1
[ 11.081909] bus: 'hid': add driver ezkey
[ 11.082193] initcall ez_init+0x0/0x1b returned 0 after 976 usecs
[ 11.082196] calling gyration_init+0x0/0x1b @ 1
[ 11.082200] bus: 'hid': add driver gyration
[ 11.082472] initcall gyration_init+0x0/0x1b returned 0 after 0 usecs
[ 11.082475] calling ks_init+0x0/0x1b @ 1
[ 11.082479] bus: 'hid': add driver kensington
[ 11.082738] initcall ks_init+0x0/0x1b returned 0 after 0 usecs
[ 11.082742] calling kye_init+0x0/0x1b @ 1
[ 11.082745] bus: 'hid': add driver kye
[ 11.083060] initcall kye_init+0x0/0x1b returned 0 after 976 usecs
[ 11.083063] calling lg_init+0x0/0x1b @ 1
[ 11.083067] bus: 'hid': add driver logitech
[ 11.083323] initcall lg_init+0x0/0x1b returned 0 after 0 usecs
[ 11.083327] calling ms_init+0x0/0x1b @ 1
[ 11.083330] bus: 'hid': add driver microsoft
[ 11.083586] initcall ms_init+0x0/0x1b returned 0 after 0 usecs
[ 11.083590] calling mr_init+0x0/0x1b @ 1
[ 11.083593] bus: 'hid': add driver monterey
[ 11.083868] initcall mr_init+0x0/0x1b returned 0 after 0 usecs
[ 11.083872] calling ntrig_init+0x0/0x1b @ 1
[ 11.083875] bus: 'hid': add driver ntrig
[ 11.084258] initcall ntrig_init+0x0/0x1b returned 0 after 976 usecs
[ 11.084261] calling pl_init+0x0/0x1b @ 1
[ 11.084265] bus: 'hid': add driver pantherlord
[ 11.084522] initcall pl_init+0x0/0x1b returned 0 after 0 usecs
[ 11.084525] calling pl_init+0x0/0x1b @ 1
[ 11.084529] bus: 'hid': add driver petalynx
[ 11.084784] initcall pl_init+0x0/0x1b returned 0 after 0 usecs
[ 11.084788] calling samsung_init+0x0/0x1b @ 1
[ 11.084791] bus: 'hid': add driver samsung
[ 11.085110] initcall samsung_init+0x0/0x1b returned 0 after 976 usecs
[ 11.085114] calling sjoy_init+0x0/0x1b @ 1
[ 11.085117] bus: 'hid': add driver smartjoyplus
[ 11.085414] initcall sjoy_init+0x0/0x1b returned 0 after 0 usecs
[ 11.085417] calling sony_init+0x0/0x1b @ 1
[ 11.085421] bus: 'hid': add driver sony
[ 11.085709] initcall sony_init+0x0/0x1b returned 0 after 0 usecs
[ 11.085712] calling sp_init+0x0/0x1b @ 1
[ 11.085716] bus: 'hid': add driver sunplus
[ 11.085980] initcall sp_init+0x0/0x1b returned 0 after 0 usecs
[ 11.085984] calling ga_init+0x0/0x1b @ 1
[ 11.085987] bus: 'hid': add driver greenasia
[ 11.086277] initcall ga_init+0x0/0x1b returned 0 after 976 usecs
[ 11.086281] calling tm_init+0x0/0x1b @ 1
[ 11.086284] bus: 'hid': add driver thrustmaster
[ 11.086585] initcall tm_init+0x0/0x1b returned 0 after 0 usecs
[ 11.086589] calling ts_init+0x0/0x1b @ 1
[ 11.086592] bus: 'hid': add driver topseed
[ 11.086859] initcall ts_init+0x0/0x1b returned 0 after 0 usecs
[ 11.086862] calling twinhan_init+0x0/0x1b @ 1
[ 11.086866] bus: 'hid': add driver twinhan
[ 11.087146] initcall twinhan_init+0x0/0x1b returned 0 after 976 usecs
[ 11.087150] calling zp_init+0x0/0x1b @ 1
[ 11.087153] bus: 'hid': add driver zeroplus
[ 11.087421] initcall zp_init+0x0/0x1b returned 0 after 0 usecs
[ 11.087424] calling hid_init+0x0/0xcb @ 1
[ 11.087575] bus: 'hid': add driver generic-usb
[ 11.087866] bus: 'usb': add driver hiddev
[ 11.088261] usbcore: registered new interface driver hiddev
[ 11.088269] bus: 'usb': add driver usbhid
[ 11.088533] usbcore: registered new interface driver usbhid
[ 11.088535] usbhid: USB HID core driver
[ 11.088539] initcall hid_init+0x0/0xcb returned 0 after 976 usecs
[ 11.088543] calling usb_mouse_init+0x0/0x38 @ 1
[ 11.088548] bus: 'usb': add driver usbmouse
[ 11.088885] usbcore: registered new interface driver usbmouse
[ 11.088887] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 11.088891] initcall usb_mouse_init+0x0/0x38 returned 0 after 0 usecs
[ 11.088895] calling oprofile_init+0x0/0x51 @ 1
[ 11.088902] Registering sysdev class 'oprofile'
[ 11.089162] Registering sys device of class 'oprofile'
[ 11.089171] Registering sys device 'oprofile0'
[ 11.089405] oprofile: using NMI interrupt.
[ 11.089420] initcall oprofile_init+0x0/0x51 returned 0 after 976 usecs
[ 11.089424] calling flow_cache_init+0x0/0x1a9 @ 1
[ 11.089872] initcall flow_cache_init+0x0/0x1a9 returned 0 after 0 usecs
[ 11.089876] calling llc_init+0x0/0x20 @ 1
[ 11.089884] initcall llc_init+0x0/0x20 returned 0 after 0 usecs
[ 11.089887] calling llc2_init+0x0/0xcc @ 1
[ 11.089967] NET: Registered protocol family 26
[ 11.089970] initcall llc2_init+0x0/0xcc returned 0 after 0 usecs
[ 11.089974] calling snap_init+0x0/0x39 @ 1
[ 11.090032] initcall snap_init+0x0/0x39 returned 0 after 976 usecs
[ 11.090036] calling blackhole_module_init+0x0/0x12 @ 1
[ 11.090041] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090045] calling gact_init_module+0x0/0x20 @ 1
[ 11.090047] GACT probability NOT on
[ 11.090067] initcall gact_init_module+0x0/0x20 returned 0 after 0 usecs
[ 11.090070] calling mirred_init_module+0x0/0x20 @ 1
[ 11.090072] Mirror/redirect action on
[ 11.090076] initcall mirred_init_module+0x0/0x20 returned 0 after 0 usecs
[ 11.090079] calling nat_init_module+0x0/0x12 @ 1
[ 11.090084] initcall nat_init_module+0x0/0x12 returned 0 after 0 usecs
[ 11.090087] calling pedit_init_module+0x0/0x12 @ 1
[ 11.090091] initcall pedit_init_module+0x0/0x12 returned 0 after 0 usecs
[ 11.090095] calling simp_init_module+0x0/0x2f @ 1
[ 11.090097] Simple TC action Loaded
[ 11.090101] initcall simp_init_module+0x0/0x2f returned 0 after 0 usecs
[ 11.090104] calling cbq_module_init+0x0/0x12 @ 1
[ 11.090109] initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090112] calling htb_module_init+0x0/0x12 @ 1
[ 11.090116] initcall htb_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090120] calling hfsc_init+0x0/0x12 @ 1
[ 11.090124] initcall hfsc_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090127] calling red_module_init+0x0/0x12 @ 1
[ 11.090132] initcall red_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090135] calling ingress_module_init+0x0/0x12 @ 1
[ 11.090140] initcall ingress_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090143] calling dsmark_module_init+0x0/0x12 @ 1
[ 11.090148] initcall dsmark_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090151] calling sfq_module_init+0x0/0x12 @ 1
[ 11.090155] initcall sfq_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090159] calling tbf_module_init+0x0/0x12 @ 1
[ 11.090163] initcall tbf_module_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090167] calling teql_init+0x0/0xd3 @ 1
[ 11.090230] device: 'teql0': device_add
[ 11.090407] PM: Adding info for No Bus:teql0
[ 11.090826] initcall teql_init+0x0/0xd3 returned 0 after 0 usecs
[ 11.090830] calling netem_module_init+0x0/0x20 @ 1
[ 11.090832] netem: version 1.2
[ 11.090836] initcall netem_module_init+0x0/0x20 returned 0 after 0 usecs
[ 11.090840] calling drr_init+0x0/0x12 @ 1
[ 11.090844] initcall drr_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090848] calling init_u32+0x0/0x3c @ 1
[ 11.090849] u32 classifier
[ 11.090851] Performance counters on
[ 11.090852] Actions configured
[ 11.090879] initcall init_u32+0x0/0x3c returned 0 after 0 usecs
[ 11.090882] calling init_fw+0x0/0x12 @ 1
[ 11.090887] initcall init_fw+0x0/0x12 returned 0 after 0 usecs
[ 11.090890] calling init_rsvp+0x0/0x12 @ 1
[ 11.090894] initcall init_rsvp+0x0/0x12 returned 0 after 0 usecs
[ 11.090898] calling init_basic+0x0/0x12 @ 1
[ 11.090902] initcall init_basic+0x0/0x12 returned 0 after 0 usecs
[ 11.090905] calling cls_flow_init+0x0/0x12 @ 1
[ 11.090909] initcall cls_flow_init+0x0/0x12 returned 0 after 0 usecs
[ 11.090913] calling sysctl_ipv4_init+0x0/0x4e @ 1
[ 11.090933] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 usecs
[ 11.090937] calling ipip_init+0x0/0x6a @ 1
[ 11.090938] IPv4 over IPv4 tunneling driver
[ 11.091064] device: 'tunl0': device_add
[ 11.091367] PM: Adding info for No Bus:tunl0
[ 11.091778] initcall ipip_init+0x0/0x6a returned 0 after 976 usecs
[ 11.091783] calling ipgre_init+0x0/0xa6 @ 1
[ 11.091784] GRE over IPv4 tunneling driver
[ 11.091848] device: 'gre0': device_add
[ 11.092102] PM: Adding info for No Bus:gre0
[ 11.092498] initcall ipgre_init+0x0/0xa6 returned 0 after 976 usecs
[ 11.092502] calling ah4_init+0x0/0x66 @ 1
[ 11.092509] initcall ah4_init+0x0/0x66 returned 0 after 0 usecs
[ 11.092513] calling ipcomp4_init+0x0/0x66 @ 1
[ 11.092518] initcall ipcomp4_init+0x0/0x66 returned 0 after 0 usecs
[ 11.092522] calling ipip_init+0x0/0x9c @ 1
[ 11.092529] initcall ipip_init+0x0/0x9c returned 0 after 0 usecs
[ 11.092532] calling xfrm4_beet_init+0x0/0x17 @ 1
[ 11.092536] initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 usecs
[ 11.092539] calling tunnel4_init+0x0/0x66 @ 1
[ 11.092543] initcall tunnel4_init+0x0/0x66 returned 0 after 0 usecs
[ 11.092546] calling xfrm4_transport_init+0x0/0x17 @ 1
[ 11.092551] initcall xfrm4_transport_init+0x0/0x17 returned 0 after 0 usecs
[ 11.092554] calling xfrm4_mode_tunnel_init+0x0/0x17 @ 1
[ 11.092558] initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
[ 11.092561] calling bictcp_register+0x0/0x12 @ 1
[ 11.092564] TCP bic registered
[ 11.092567] initcall bictcp_register+0x0/0x12 returned 0 after 0 usecs
[ 11.092570] calling cubictcp_register+0x0/0x68 @ 1
[ 11.092573] TCP cubic registered
[ 11.092576] initcall cubictcp_register+0x0/0x68 returned 0 after 0 usecs
[ 11.092579] calling hstcp_register+0x0/0x12 @ 1
[ 11.092581] TCP highspeed registered
[ 11.092584] initcall hstcp_register+0x0/0x12 returned 0 after 0 usecs
[ 11.092587] calling hybla_register+0x0/0x12 @ 1
[ 11.092590] TCP hybla registered
[ 11.092593] initcall hybla_register+0x0/0x12 returned 0 after 0 usecs
[ 11.092596] calling tcp_scalable_register+0x0/0x12 @ 1
[ 11.092598] TCP scalable registered
[ 11.092601] initcall tcp_scalable_register+0x0/0x12 returned 0 after 0 usecs
[ 11.092604] calling tcp_illinois_register+0x0/0x12 @ 1
[ 11.092607] TCP illinois registered
[ 11.092610] initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 usecs
[ 11.092613] calling xfrm_user_init+0x0/0x4a @ 1
[ 11.092615] Initializing XFRM netlink socket
[ 11.092711] initcall xfrm_user_init+0x0/0x4a returned 0 after 0 usecs
[ 11.092715] calling inet6_init+0x0/0x2a6 @ 1
[ 11.095153] NET: Registered protocol family 10
[ 11.099776] initcall inet6_init+0x0/0x2a6 returned 0 after 6835 usecs
[ 11.099781] calling ah6_init+0x0/0x66 @ 1
[ 11.099787] initcall ah6_init+0x0/0x66 returned 0 after 0 usecs
[ 11.099791] calling esp6_init+0x0/0x66 @ 1
[ 11.099795] initcall esp6_init+0x0/0x66 returned 0 after 0 usecs
[ 11.099799] calling tunnel6_init+0x0/0x66 @ 1
[ 11.099803] initcall tunnel6_init+0x0/0x66 returned 0 after 0 usecs
[ 11.099806] calling xfrm6_transport_init+0x0/0x17 @ 1
[ 11.099811] initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs
[ 11.099814] calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1
[ 11.099818] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
[ 11.099822] calling xfrm6_ro_init+0x0/0x17 @ 1
[ 11.099826] initcall xfrm6_ro_init+0x0/0x17 returned 0 after 0 usecs
[ 11.099829] calling mip6_init+0x0/0xba @ 1
[ 11.099831] Mobile IPv6
[ 11.099835] initcall mip6_init+0x0/0xba returned 0 after 0 usecs
[ 11.099838] calling sit_init+0x0/0x6a @ 1
[ 11.099840] IPv6 over IPv4 tunneling driver
[ 11.099906] device: 'sit0': device_add
[ 11.100178] PM: Adding info for No Bus:sit0
[ 11.100832] initcall sit_init+0x0/0x6a returned 0 after 976 usecs
[ 11.100837] calling ip6_tunnel_init+0x0/0x9b @ 1
[ 11.100953] device: 'ip6tnl0': device_add
[ 11.101169] PM: Adding info for No Bus:ip6tnl0
[ 11.101765] initcall ip6_tunnel_init+0x0/0x9b returned 0 after 976 usecs
[ 11.101769] calling packet_init+0x0/0x47 @ 1
[ 11.101774] NET: Registered protocol family 17
[ 11.101854] initcall packet_init+0x0/0x47 returned 0 after 0 usecs
[ 11.101857] calling ipsec_pfkey_init+0x0/0x82 @ 1
[ 11.101881] NET: Registered protocol family 15
[ 11.101885] initcall ipsec_pfkey_init+0x0/0x82 returned 0 after 0 usecs
[ 11.101889] calling atalk_init+0x0/0x8d @ 1
[ 11.101892] NET: Registered protocol family 5
[ 19.293996] INFO: RCU detected CPU stalls: 1 (detected by 0, t=10002 jiffies)
[ 19.293996] sending NMI to all CPUs:
[ 19.294339] NMI backtrace for cpu 0
[ 19.294339] CPU 0
[ 19.294339] Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697 A8N-E/System Product Name
[ 19.294339] RIP: 0010:[<ffffffff81009f3f>] [<ffffffff81009f3f>] native_read_tsc+0x6/0x16
[ 19.294339] RSP: 0018:ffff880003a03df8 EFLAGS: 00000046
[ 19.294339] RAX: 0000000082d602a7 RBX: ffffffff82c1aeae RCX: 0000000082d60282
[ 19.294339] RDX: 0000000000000017 RSI: 0000000000000002 RDI: 00000000001eadb1
[ 19.294339] RBP: ffff880003a03df8 R08: 0000000000000000 R09: 0000000000000003
[ 19.294339] R10: ffffffff824a65a0 R11: 0000000000000000 R12: 00000000001eadb1
[ 19.294339] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000093c70
[ 19.294339] FS: 0000000000000000(0000) GS:ffff880003a00000(0000) knlGS:0000000000000000
[ 19.294339] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 19.294339] CR2: 0000000000000000 CR3: 0000000002494000 CR4: 00000000000006f0
[ 19.294339] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 19.294339] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 19.294339] Process swapper (pid: 0, threadinfo ffffffff82400000, task ffffffff8249c020)
[ 19.294339] Stack:
[ 19.294339] ffff880003a03e28 ffffffff813e9039 00000000000004a6 ffffffff824f2000
[ 19.294339] <0> 0000000000000000 ffffffff824f2000 ffff880003a03e38 ffffffff813e8fa5
[ 19.294339] <0> ffff880003a03e48 ffffffff813e8fe4 ffff880003a03e68 ffffffff8101a1a7
[ 19.294339] Call Trace:
[ 19.294339] <IRQ>
[ 19.294339] [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI>
[ 19.294339] [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] Code: 00 e8 8d f0 3d 00 c9 c3 55 40 88 f8 48 89 e5 e6 70 e4 71 c9 c3 55 40 88 f0 48 89 e5 e6 70 40 88 f8 e6 71 c9 c3 55 48 89 e5 0f 31 <89> c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9 c3 55 48 89 e5 41
[ 19.294339] Call Trace:
[ 19.294339] <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697
[ 19.294339] Call Trace:
[ 19.294339] <NMI> [<ffffffff8100a778>] ? show_regs+0x26/0x2b
[ 19.294339] [<ffffffff8101a23c>] hw_nmi_is_cpu_stuck+0x4f/0xb7
[ 19.294339] [<ffffffff810907ab>] wd_overflow+0x43/0xc3
[ 19.294339] [<ffffffff810ad21d>] __perf_event_overflow+0x184/0x1fd
[ 19.294339] [<ffffffff810a9de1>] ? rcu_read_unlock+0x1c/0x1e
[ 19.294339] [<ffffffff810ad6ce>] perf_event_overflow+0x14/0x16
[ 19.294339] [<ffffffff810104ff>] x86_pmu_handle_irq+0x16d/0x1b6
[ 19.294339] [<ffffffff8100f4b8>] perf_event_nmi_handler+0x42/0x4f
[ 19.294339] [<ffffffff81060857>] notifier_call_chain+0x63/0x97
[ 19.294339] [<ffffffff81060ccb>] __atomic_notifier_call_chain+0x59/0x86
[ 19.294339] [<ffffffff81060c72>] ? __atomic_notifier_call_chain+0x0/0x86
[ 19.294339] [<ffffffff81060d07>] atomic_notifier_call_chain+0xf/0x11
[ 19.294339] [<ffffffff81060d37>] notify_die+0x2e/0x30
[ 19.294339] [<ffffffff81004956>] default_do_nmi+0x57/0x1ee
[ 19.294339] [<ffffffff81004b4d>] do_nmi+0x60/0x9b
[ 19.294339] [<ffffffff81b8ba60>] nmi+0x20/0x39
[ 19.294339] [<ffffffff81009f3f>] ? native_read_tsc+0x6/0x16
[ 19.294339] <<EOE>> <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] ------------[ cut here ]------------
[ 19.294339] WARNING: at kernel/nmi_watchdog.c:139 wd_overflow+0xa3/0xc3()
[ 19.294339] Hardware name: System Product Name
[ 19.294339] NMI Watchdog detected LOCKUP on cpu 0Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip+ #16697
[ 19.294339] Call Trace:
[ 19.294339] <NMI> [<ffffffff8104331c>] warn_slowpath_common+0x72/0x8a
[ 19.294339] [<ffffffff81043381>] warn_slowpath_fmt+0x3c/0x3e
[ 19.294339] [<ffffffff8109080b>] wd_overflow+0xa3/0xc3
[ 19.294339] [<ffffffff810ad21d>] __perf_event_overflow+0x184/0x1fd
[ 19.294339] [<ffffffff810a9de1>] ? rcu_read_unlock+0x1c/0x1e
[ 19.294339] [<ffffffff810ad6ce>] perf_event_overflow+0x14/0x16
[ 19.294339] [<ffffffff810104ff>] x86_pmu_handle_irq+0x16d/0x1b6
[ 19.294339] [<ffffffff8100f4b8>] perf_event_nmi_handler+0x42/0x4f
[ 19.294339] [<ffffffff81060857>] notifier_call_chain+0x63/0x97
[ 19.294339] [<ffffffff81060ccb>] __atomic_notifier_call_chain+0x59/0x86
[ 19.294339] [<ffffffff81060c72>] ? __atomic_notifier_call_chain+0x0/0x86
[ 19.294339] [<ffffffff81060d07>] atomic_notifier_call_chain+0xf/0x11
[ 19.294339] [<ffffffff81060d37>] notify_die+0x2e/0x30
[ 19.294339] [<ffffffff81004956>] default_do_nmi+0x57/0x1ee
[ 19.294339] [<ffffffff81004b4d>] do_nmi+0x60/0x9b
[ 19.294339] [<ffffffff81b8ba60>] nmi+0x20/0x39
[ 19.294339] [<ffffffff81009f3f>] ? native_read_tsc+0x6/0x16
[ 19.294339] <<EOE>> <IRQ> [<ffffffff813e9039>] delay_tsc+0x32/0x79
[ 19.294339] [<ffffffff813e8fa5>] __delay+0xa/0xc
[ 19.294339] [<ffffffff813e8fe4>] __const_udelay+0x3d/0x3f
[ 19.294339] [<ffffffff8101a1a7>] arch_trigger_all_cpu_backtrace+0x73/0x7f
[ 19.294339] [<ffffffff81095468>] print_other_cpu_stall+0xf7/0x10a
[ 19.294339] [<ffffffff81095540>] check_cpu_stall+0xc5/0xc9
[ 19.294339] [<ffffffff81095567>] __rcu_pending+0x23/0xd9
[ 19.294339] [<ffffffff8109564d>] rcu_check_callbacks+0x30/0x107
[ 19.294339] [<ffffffff81050219>] update_process_times+0x3c/0x5b
[ 19.294339] [<ffffffff81068492>] tick_periodic+0x63/0x6f
[ 19.294339] [<ffffffff810684bf>] tick_handle_periodic+0x21/0x6e
[ 19.294339] [<ffffffff81019b1a>] smp_apic_timer_interrupt+0x7c/0x8f
[ 19.294339] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
[ 19.294339] <EOI> [<ffffffff81020564>] ? native_safe_halt+0x6/0x8
[ 19.294339] [<ffffffff8106da5a>] ? trace_hardirqs_on+0xd/0xf
[ 19.294339] [<ffffffff8100a988>] default_idle+0x36/0x58
[ 19.294339] [<ffffffff81001bd6>] cpu_idle+0xdc/0x11d
[ 19.294339] [<ffffffff81b22580>] rest_init+0x74/0x76
[ 19.294339] [<ffffffff82a54d56>] start_kernel+0x372/0x37a
[ 19.294339] [<ffffffff82a542a0>] x86_64_start_reservations+0xa7/0xab
[ 19.294339] [<ffffffff82a5439c>] x86_64_start_kernel+0xf8/0x107
[ 19.294339] ---[ end trace 12a5a6fbc564882f ]---
[ 19.295052] async_waiting @ 2046
[ 19.296176] async_continuing @ 2046 after 0 usec
[ 19.298241] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 19.308341] device: 'target0:0:0': device_add
[ 19.310536] PM: Adding info for No Bus:target0:0:0
[ 19.312112] device: '0:0:0:0': device_add
[ 19.314823] bus: 'scsi': add device 0:0:0:0
[ 19.315821] PM: Adding info for scsi:0:0:0:0
[ 19.318189] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver st
[ 19.325106] bus: 'scsi': really_probe: probing driver st with device 0:0:0:0
[ 19.333076] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver osst
[ 19.340008] bus: 'scsi': really_probe: probing driver osst with device 0:0:0:0
[ 19.348034] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[ 19.355008] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[ 19.363104] device: '0:0:0:0': device_add
[ 19.367092] PM: Adding info for No Bus:0:0:0:0
[ 19.372137] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[ 19.378010] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[ 19.385040] device: '0:0:0:0': device_add
[ 19.389141] calling 3_sd_probe_async+0x0/0x1ea @ 2625
[ 19.389126] PM: Adding info for No Bus:0:0:0:0
[ 19.389712] device: 'sg0': device_add
[ 19.389999] PM: Adding info for No Bus:sg0
[ 19.389999] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.389999] device: '0:0:0:0': device_add
[ 19.389999] PM: Adding info for No Bus:0:0:0:0
[ 19.389999] initcall 1_async_port_probe+0x0/0xb6 returned 0 after 12315429 usecs
[ 19.389999] async_continuing @ 2047 after 12315429 usec
[ 19.393934] initcall atalk_init+0x0/0x8d returned 0 after 8097656 usecs
[ 19.394148] calling x25_init+0x0/0x95 @ 1
[ 19.395016] NET: Registered protocol family 9
[ 19.396012] X.25 for Linux Version 0.2
[ 19.398311] initcall x25_init+0x0/0x95 returned 0 after 2929 usecs
[ 19.399008] calling lapb_init+0x0/0x8 @ 1
[ 19.400007] initcall lapb_init+0x0/0x8 returned 0 after 0 usecs
[ 19.401007] calling l2cap_init+0x0/0xe4 @ 1
[ 19.403192] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 19.405075] sd 0:0:0:0: [sda] Write Protect is off
[ 19.406012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.408064] Bluetooth: L2CAP ver 2.14
[ 19.409007] Bluetooth: L2CAP socket layer initialized
[ 19.410008] initcall l2cap_init+0x0/0xe4 returned 0 after 7812 usecs
[ 19.411007] calling rfcomm_init+0x0/0xc7 @ 1
[ 19.412194] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.413021] device: 'sda': device_add
[ 19.414103] PM: Adding info for No Bus:sda
[ 19.416088] Bluetooth: RFCOMM socket layer initialized
[ 19.417007] Bluetooth: RFCOMM ver 1.11
[ 19.419009] initcall rfcomm_init+0x0/0xc7 returned 0 after 6835 usecs
[ 19.420007] calling bnep_init+0x0/0x91 @ 1
[ 19.421006] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.422006] Bluetooth: BNEP filters: multicast
[ 19.423019] initcall bnep_init+0x0/0x91 returned 0 after 1953 usecs
[ 19.424008] calling cmtp_init+0x0/0x27 @ 1
[ 19.425010] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[ 19.426009] initcall cmtp_init+0x0/0x27 returned 0 after 976 usecs
[ 19.427008] calling init_rpcsec_gss+0x0/0x4d @ 1
[ 19.429034] initcall init_rpcsec_gss+0x0/0x4d returned 0 after 976 usecs
[ 19.430008] calling init_kerberos_module+0x0/0x2f @ 1
[ 19.431063] initcall init_kerberos_module+0x0/0x2f returned 0 after 0 usecs
[ 19.432007] calling af_rxrpc_init+0x0/0x1a0 @ 1
[ 19.434249] sda:
[ 19.436895] NET: Registered protocol family 33
[ 19.437107] initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 3906 usecs
[ 19.438008] calling rxkad_init+0x0/0x3b @ 1
[ 19.438998] sda1 sda2 sda3 <
[ 19.442803] RxRPC: Registered security type 2 'rxkad'
[ 19.443059] initcall rxkad_init+0x0/0x3b returned 0 after 3906 usecs
[ 19.444008] calling lane_module_init+0x0/0x5c @ 1
[ 19.444998] sda5lec.c: Feb 14 2010 20:56:46 initialized
[ 19.448009] initcall lane_module_init+0x0/0x5c returned 0 after 2929 usecs
[ 19.449007] calling atm_mpoa_init+0x0/0x39 @ 1
[ 19.450058] mpc.c: Feb 14 2010 20:56:38 initialized
[ 19.451008] initcall atm_mpoa_init+0x0/0x39 returned 0 after 976 usecs
[ 19.452007] calling decnet_init+0x0/0x8b @ 1
[ 19.453006] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 19.453998] sda6
[ 19.458173] DECnet: Routing cache hash table of 512 buckets, 36Kbytes
[ 19.459125] NET: Registered protocol family 12
[ 19.460036] initcall decnet_init+0x0/0x8b returned 0 after 6835 usecs
[ 19.461008] calling econet_proto_init+0x0/0x3b @ 1
[ 19.462008] NET: Registered protocol family 19
[ 19.463061] initcall econet_proto_init+0x0/0x3b returned 0 after 976 usecs
[ 19.464007] calling phonet_init+0x0/0x7d @ 1
[ 19.465048] NET: Registered protocol family 35
[ 19.466194] sda7initcall phonet_init+0x0/0x7d returned 0 after 2929 usecs
[ 19.469009] calling pep_register+0x0/0x17 @ 1
[ 19.470181] sda8initcall pep_register+0x0/0x17 returned 0 after 1953 usecs
[ 19.473009] calling dccp_init+0x0/0x37b @ 1
[ 19.480890] sda9
[ 19.485256] CCID: Activated CCID 2 (TCP-like)
[ 19.487357] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[ 19.488061] initcall dccp_init+0x0/0x37b returned 0 after 13671 usecs
[ 19.489009] calling dccp_v4_init+0x0/0x86 @ 1
[ 19.489998] sda10 >
[ 19.493357] initcall dccp_v4_init+0x0/0x86 returned 0 after 2929 usecs
[ 19.494010] calling dccp_v6_init+0x0/0x86 @ 1
[ 19.497112] initcall dccp_v6_init+0x0/0x86 returned 0 after 1953 usecs
[ 19.498010] calling sctp_init+0x0/0x71d @ 1
[ 19.500194] device: 'sda1': device_add
[ 19.504341] PM: Adding info for No Bus:sda1
[ 19.508148] device: 'sda2': device_add
[ 19.512378] PM: Adding info for No Bus:sda2
[ 19.521619] SCTP: Hash tables configured (established 14563 bind 14563)
[ 19.521998] device: 'sda3': device_add
[ 19.526541] PM: Adding info for No Bus:sda3
[ 19.531042] device: 'sda5': device_add
[ 19.535176] initcall sctp_init+0x0/0x71d returned 0 after 35156 usecs
[ 19.536010] calling rds_init+0x0/0xb6 @ 1
[ 19.538136] PM: Adding info for No Bus:sda5
[ 19.539217] device: 'sda6': device_add
[ 19.540124] PM: Adding info for No Bus:sda6
[ 19.541038] device: 'sda7': device_add
[ 19.542069] PM: Adding info for No Bus:sda7
[ 19.542438] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[ 19.543038] device: 'sda8': device_add
[ 19.543103] PM: Adding info for No Bus:sda8
[ 19.543143] device: 'sda9': device_add
[ 19.543198] PM: Adding info for No Bus:sda9
[ 19.543229] device: 'sda10': device_add
[ 19.543293] PM: Adding info for No Bus:sda10
[ 19.573030] ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[ 19.576391] device: '8:0': device_add
[ 19.576423] PM: Adding info for No Bus:8:0
[ 19.577414] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.577422] initcall 3_sd_probe_async+0x0/0x1ea returned 0 after 181640 usecs
[ 19.577949] NET: Registered protocol family 21
[ 19.577957] initcall rds_init+0x0/0xb6 returned 0 after 39062 usecs
[ 19.577961] calling wimax_subsys_init+0x0/0x24c @ 1
[ 19.578149] initcall wimax_subsys_init+0x0/0x24c returned 0 after 976 usecs
[ 19.578153] calling mcheck_debugfs_init+0x0/0x3c @ 1
[ 19.578223] initcall mcheck_debugfs_init+0x0/0x3c returned 0 after 0 usecs
[ 19.578227] calling severities_debugfs_init+0x0/0x3c @ 1
[ 19.578247] initcall severities_debugfs_init+0x0/0x3c returned 0 after 0 usecs
[ 19.578251] calling cpufreq_p4_init+0x0/0x5c @ 1
[ 19.578254] initcall cpufreq_p4_init+0x0/0x5c returned -19 after 0 usecs
[ 19.578258] calling update_mp_table+0x0/0x247 @ 1
[ 19.578262] initcall update_mp_table+0x0/0x247 returned 0 after 0 usecs
[ 19.578266] calling lapic_insert_resource+0x0/0x3f @ 1
[ 19.578273] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[ 19.578276] calling io_apic_bug_finalize+0x0/0x1b @ 1
[ 19.578280] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
[ 19.578284] calling check_early_ioremap_leak+0x0/0x65 @ 1
[ 19.578287] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
[ 19.578290] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 19.578311] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 0 usecs
[ 19.578314] calling sched_init_debug+0x0/0x24 @ 1
[ 19.578333] initcall sched_init_debug+0x0/0x24 returned 0 after 0 usecs
[ 19.578338] calling init_oops_id+0x0/0x31 @ 1
[ 19.578342] initcall init_oops_id+0x0/0x31 returned 0 after 0 usecs
[ 19.578345] calling disable_boot_consoles+0x0/0x5c @ 1
[ 19.578349] initcall disable_boot_consoles+0x0/0x5c returned 0 after 0 usecs
[ 19.578352] calling pm_qos_power_init+0x0/0x61 @ 1
[ 19.578374] device: 'cpu_dma_latency': device_add
[ 19.578647] PM: Adding info for No Bus:cpu_dma_latency
[ 19.578971] device: 'network_latency': device_add
[ 19.579200] PM: Adding info for No Bus:network_latency
[ 19.579488] device: 'network_throughput': device_add
[ 19.579704] PM: Adding info for No Bus:network_throughput
[ 19.579989] initcall pm_qos_power_init+0x0/0x61 returned 0 after 976 usecs
[ 19.580012] calling software_resume+0x0/0x20d @ 1
[ 19.580073] PM: Resume from disk failed.
[ 19.580077] initcall software_resume+0x0/0x20d returned -2 after 0 usecs
[ 19.580080] initcall software_resume+0x0/0x20d returned with error code -2
[ 19.580084] calling taskstats_init+0x0/0x95 @ 1
[ 19.580141] registered taskstats version 1
[ 19.580144] initcall taskstats_init+0x0/0x95 returned 0 after 0 usecs
[ 19.580147] calling clear_boot_tracer+0x0/0x2d @ 1
[ 19.580151] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
[ 19.580155] calling max_swapfiles_check+0x0/0x8 @ 1
[ 19.580159] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 19.580163] calling afs_init+0x0/0xbf @ 1
[ 19.580165] kAFS: Red Hat AFS client v0.1 registering.
[ 19.580250] FS-Cache: Netfs 'afs' registered for caching
[ 19.581467] initcall afs_init+0x0/0xbf returned 0 after 976 usecs
[ 19.581474] calling raid6_test+0x0/0x116 @ 1
[ 19.581556] raid6test: testing the 4-disk case...
[ 19.581631] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 19.581716] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK
[ 19.581771] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK
[ 19.581855] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK
[ 19.581911] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK
[ 19.581965] raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK
[ 19.582069] raid6test: testing the 5-disk case...
[ 19.582160] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 19.582249] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 19.582330] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK
[ 19.582387] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK
[ 19.582475] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 19.582558] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK
[ 19.582614] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK
[ 19.582693] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK
[ 19.582749] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK
[ 19.582804] raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK
[ 19.582869] raid6test: testing the 11-disk case...
[ 19.582987] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 19.583114] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 19.583224] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 19.583331] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 19.583438] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 19.583546] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 19.583659] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 19.583770] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 19.583877] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK
[ 19.583967] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK
[ 19.584094] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 19.584205] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 19.584315] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 19.584425] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 19.584534] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 19.584650] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 19.584763] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 19.584871] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK
[ 19.584961] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK
[ 19.585092] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 19.585201] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 19.585311] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 19.585420] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 19.585536] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 19.585646] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 19.585753] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK
[ 19.585841] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK
[ 19.585948] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 19.586108] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 19.586220] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 19.586331] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 19.586437] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 19.586543] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK
[ 19.586625] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK
[ 19.586732] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 19.586838] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 19.586953] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 19.587071] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 19.587179] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK
[ 19.587263] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK
[ 19.587369] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 19.587479] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 19.587585] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 19.587689] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK
[ 19.587766] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK
[ 19.587873] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 19.587978] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 19.588091] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK
[ 19.588169] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK
[ 19.588282] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 19.588389] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK
[ 19.588475] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK
[ 19.588581] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK
[ 19.588667] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK
[ 19.588748] raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK
[ 19.588821] raid6test: testing the 12-disk case...
[ 19.588947] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 19.589076] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 19.589191] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 19.589308] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 19.589420] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 19.589531] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 19.589645] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 19.589756] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 19.589866] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 19.589982] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK
[ 19.590152] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK
[ 19.590276] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 19.590391] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 19.590510] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 19.590625] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 19.590737] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 19.590853] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 19.590967] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 19.591089] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 19.591206] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK
[ 19.591294] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK
[ 19.591413] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 19.591527] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 19.591642] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 19.591755] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 19.591870] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 19.591981] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 19.592103] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 19.592220] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK
[ 19.592307] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK
[ 19.592422] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 19.592541] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 19.592655] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 19.592772] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 19.592891] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 19.593018] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 19.593139] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK
[ 19.593227] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK
[ 19.593344] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 19.593461] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 19.593583] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 19.593702] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 19.593824] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 19.593938] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK
[ 19.594079] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK
[ 19.594198] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 19.594321] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 19.594444] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 19.594562] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 19.594682] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK
[ 19.594773] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK
[ 19.594897] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 19.595028] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 19.595143] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 19.595258] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK
[ 19.595345] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK
[ 19.595471] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 19.595590] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 19.595710] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK
[ 19.595802] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK
[ 19.595915] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 19.596051] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK
[ 19.596146] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK
[ 19.596257] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK
[ 19.596350] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK
[ 19.596436] raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK
[ 19.596527] raid6test: testing the 16-disk case...
[ 19.596663] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 19.596806] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 19.596942] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 19.597095] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 19.597238] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 19.597381] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 19.597525] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 19.597665] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 19.597802] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 19.597941] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK
[ 19.598138] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK
[ 19.598277] raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK
[ 19.598410] raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK
[ 19.598551] raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK
[ 19.598673] raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK
[ 19.598823] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 19.598972] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 19.599136] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 19.599288] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 19.599439] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 19.599590] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 19.599738] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 19.599882] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 19.600036] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK
[ 19.600186] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK
[ 19.600331] raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK
[ 19.600469] raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK
[ 19.600614] raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK
[ 19.600743] raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK
[ 19.600891] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 19.601052] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 19.601208] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 19.601359] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 19.601514] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 19.601661] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 19.601807] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 19.601951] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK
[ 19.602159] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK
[ 19.602307] raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK
[ 19.602452] raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK
[ 19.602600] raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK
[ 19.602727] raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK
[ 19.602878] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 19.603038] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 19.603189] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 19.603339] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 19.603484] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 19.603627] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 19.603771] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK
[ 19.603920] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK
[ 19.604078] raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK
[ 19.604218] raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK
[ 19.604363] raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK
[ 19.604490] raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK
[ 19.604639] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 19.604790] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 19.604942] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 19.605105] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 19.605250] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 19.605392] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK
[ 19.605540] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK
[ 19.605684] raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK
[ 19.605823] raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK
[ 19.605969] raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK
[ 19.606140] raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK
[ 19.606288] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 19.606440] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 19.606588] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 19.606732] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 19.606878] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK
[ 19.607040] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK
[ 19.607186] raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK
[ 19.607331] raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK
[ 19.607478] raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK
[ 19.607607] raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK
[ 19.607759] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 19.607902] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 19.608055] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 19.608198] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK
[ 19.608345] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK
[ 19.608490] raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK
[ 19.608626] raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK
[ 19.608768] raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK
[ 19.608891] raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK
[ 19.609047] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 19.609191] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 19.609335] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK
[ 19.609484] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK
[ 19.609630] raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK
[ 19.609768] raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK
[ 19.609914] raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK
[ 19.610094] raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK
[ 19.610236] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 19.610378] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK
[ 19.610528] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK
[ 19.610674] raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK
[ 19.610813] raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK
[ 19.610959] raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK
[ 19.611101] raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK
[ 19.611240] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK
[ 19.611383] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK
[ 19.611524] raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK
[ 19.611661] raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK
[ 19.611803] raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK
[ 19.611928] raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK
[ 19.612082] raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK
[ 19.612224] raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK
[ 19.612364] raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK
[ 19.612505] raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK
[ 19.612626] raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK
[ 19.612774] raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK
[ 19.612919] raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK
[ 19.613072] raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK
[ 19.613204] raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK
[ 19.613348] raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK
[ 19.613487] raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK
[ 19.613610] raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK
[ 19.613746] raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK
[ 19.613875] raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK
[ 19.613991] raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK
[ 19.613993] raid6test:
[ 19.613995] raid6test: complete (257 tests, 0 failures)
[ 19.614094] initcall raid6_test+0x0/0x116 returned 0 after 32226 usecs
[ 19.614099] calling fail_make_request_debugfs+0x0/0xb @ 1
[ 19.614103] initcall fail_make_request_debugfs+0x0/0xb returned -19 after 0 usecs
[ 19.614107] calling fail_io_timeout_debugfs+0x0/0xb @ 1
[ 19.614111] initcall fail_io_timeout_debugfs+0x0/0xb returned -19 after 0 usecs
[ 19.614114] calling random32_reseed+0x0/0xa8 @ 1
[ 19.614138] initcall random32_reseed+0x0/0xa8 returned 0 after 0 usecs
[ 19.614141] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
[ 19.614155] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 19.614159] calling pci_sysfs_init+0x0/0x51 @ 1
[ 19.614862] initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 usecs
[ 19.614866] calling seqgen_init+0x0/0xf @ 1
[ 19.614892] initcall seqgen_init+0x0/0xf returned 0 after 0 usecs
[ 19.614896] calling late_resume_init+0x0/0x121 @ 1
[ 19.614898] Magic number: 14:986:910
[ 19.615021] tty ttySL2: hash matches
[ 19.615225] initcall late_resume_init+0x0/0x121 returned 0 after 976 usecs
[ 19.615230] calling scsi_complete_async_scans+0x0/0x118 @ 1
[ 19.615234] initcall scsi_complete_async_scans+0x0/0x118 returned 0 after 0 usecs
[ 19.615238] calling rtc_hctosys+0x0/0x170 @ 1
[ 19.615324] rtc_cmos rtc_cmos: setting system clock to 2010-02-15 00:55:50 UTC (1266195350)
[ 19.615329] initcall rtc_hctosys+0x0/0x170 returned 0 after 0 usecs
[ 19.615333] calling memmap_init+0x0/0xa3 @ 1
[ 19.615470] initcall memmap_init+0x0/0xa3 returned 0 after 0 usecs
[ 19.615474] calling tcp_congestion_default+0x0/0x12 @ 1
[ 19.615480] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
[ 19.615483] calling ip_auto_config+0x0/0x219 @ 1
[ 19.615512] initcall ip_auto_config+0x0/0x219 returned 0 after 0 usecs
[ 19.615516] calling initialize_hashrnd+0x0/0x19 @ 1
[ 19.615526] initcall initialize_hashrnd+0x0/0x19 returned 0 after 0 usecs
[ 19.615591] async_waiting @ 1
[ 20.577034] async/2 used greatest stack depth: 3912 bytes left
[ 21.813230] ata2.01: configured for UDMA/33
[ 21.818180] async_waiting @ 2047
[ 21.821014] async_continuing @ 2047 after 0 usec
[ 21.826451] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
[ 21.834072] device: 'target1:0:1': device_add
[ 21.839033] PM: Adding info for No Bus:target1:0:1
[ 21.844017] device: '1:0:1:0': device_add
[ 21.848083] bus: 'scsi': add device 1:0:1:0
[ 21.852033] PM: Adding info for scsi:1:0:1:0
[ 21.857012] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st
[ 21.858010] bus: 'scsi': really_probe: probing driver st with device 1:0:1:0
[ 21.859066] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst
[ 21.860061] bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0
[ 21.861038] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[ 21.862008] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[ 21.863038] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[ 21.864051] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[ 21.870461] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 21.871012] Uniform CD-ROM driver Revision: 3.20
[ 21.872080] device: 'sr0': device_add
[ 21.873125] PM: Adding info for No Bus:sr0
[ 21.875202] device: '11:0': device_add
[ 21.876040] PM: Adding info for No Bus:11:0
[ 21.877210] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 21.878058] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[ 21.879010] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[ 21.880017] device: '1:0:1:0': device_add
[ 21.881054] PM: Adding info for No Bus:1:0:1:0
[ 21.883129] device: 'sg1': device_add
[ 21.885104] PM: Adding info for No Bus:sg1
[ 21.886229] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 21.887138] device: '1:0:1:0': device_add
[ 21.889203] PM: Adding info for No Bus:1:0:1:0
[ 21.890236] initcall 2_async_port_probe+0x0/0xb6 returned 0 after 14757812 usecs
[ 21.891123] async_continuing @ 1 after 2222656 usec
[ 21.892140] md: Waiting for all devices to be available before autodetect
[ 21.893007] md: If you don't use raid, use raid=noautodetect
[ 21.894006] async_waiting @ 1
[ 21.895063] async_continuing @ 1 after 0 usec
[ 21.896397] device: 'md0': device_add
[ 21.897144] PM: Adding info for No Bus:md0
[ 21.899248] device: '9:0': device_add
[ 21.901007] PM: Adding info for No Bus:9:0
[ 21.902315] md: Autodetecting RAID arrays.
[ 21.903050] md: Scanned 0 and added 0 devices.
[ 21.904007] md: autorun ...
[ 21.905012] md: ... autorun DONE.
[ 21.908221] EXT3-fs (sda6): recovery required on readonly filesystem
[ 21.910198] EXT3-fs (sda6): write access will be enabled during recovery
[ 21.940188] kjournald starting. Commit interval 5 seconds
[ 21.940269] EXT3-fs (sda6): recovery complete
[ 21.950252] EXT3-fs (sda6): mounted filesystem with writeback data mode
[ 21.953155] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
[ 21.954092] async_waiting @ 1
[ 21.955012] async_continuing @ 1 after 0 usec
[ 21.956007] debug: unmapping init memory ffffffff8287e000..ffffffff82ae9000
[ 21.957294] Write protecting the kernel read-only data: 20480k
[ 21.959044] debug: unmapping init memory ffff880001b92000..ffff880001c00000
[ 21.960053] debug: unmapping init memory ffff880002229000..ffff880002400000
[ 22.248012] SELinux: Disabled at runtime.
[ 22.252640] type=1404 audit(1266195353.137:2): selinux=0 auid=4294967295 ses=4294967295
[ 22.632501] mount used greatest stack depth: 3664 bytes left
[ 24.507445] NMI backtrace for cpu 1
[ 24.508029] CPU 1
[ 24.508029] Pid: 3030, comm: udevd Tainted: G W 2.6.33-rc8-tip+ #16697 A8N-E/System Product Name
[ 24.508029] RIP: 0033:[<00007fbdb0cff188>] [<00007fbdb0cff188>] 0x7fbdb0cff188
[ 24.529504] RSP: 002b:00007fffe6d330f0 EFLAGS: 00000246
[ 24.534102] RAX: 00007fbdb0ee9000 RBX: 00000000002156b0 RCX: 00007fffe6d33110
[ 24.542239] RDX: 00007fbdb05528a0 RSI: 00007fbdb0f0f490 RDI: 00007fbdb055d328
[ 24.549177] RBP: 00007fbdb0f0e000 R08: 00007fbdb0ee9000 R09: 00007fbdb0f0b2b8
[ 24.549177] R10: 0000000000000000 R11: 00000000ffffffff R12: 00007fbdb1123860
[ 24.549177] R13: 00007fbdb289f130 R14: 00007fffe6d33410 R15: 00007fbdb289c3a0
[ 24.549177] FS: 00007fbdb0ee7780(0000) GS:ffff880003c00000(0000) knlGS:0000000000000000
[ 24.549177] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 24.549177] CR2: 00007fbdb055a91d CR3: 000000003e2fa000 CR4: 00000000000006e0
[ 24.549177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 24.549177] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 24.549177] Process udevd (pid: 3030, threadinfo ffff88003e2f8000, task ffff88003d508000)
[ 24.549177]
[ 24.549177] Call Trace:
[ 24.549177] Pid: 3030, comm: udevd Tainted: G W 2.6.33-rc8-tip+ #16697
[ 24.549177] Call Trace:
[ 24.549177] <NMI> [<ffffffff8100a778>] ? show_regs+0x26/0x2b
[ 24.549177] [<ffffffff8101a23c>] hw_nmi_is_cpu_stuck+0x4f/0xb7
[ 24.549177] [<ffffffff810907ab>] wd_overflow+0x43/0xc3
[ 24.549177] [<ffffffff810ad21d>] __perf_event_overflow+0x184/0x1fd
[ 24.549177] [<ffffffff810a9de1>] ? rcu_read_unlock+0x1c/0x1e
[ 24.549177] [<ffffffff810ad6ce>] perf_event_overflow+0x14/0x16
[ 24.549177] [<ffffffff810104ff>] x86_pmu_handle_irq+0x16d/0x1b6
[ 24.549177] [<ffffffff8100f4b8>] perf_event_nmi_handler+0x42/0x4f
[ 24.549177] [<ffffffff81060857>] notifier_call_chain+0x63/0x97
[ 24.549177] [<ffffffff81060ccb>] __atomic_notifier_call_chain+0x59/0x86
[ 24.549177] [<ffffffff81060c72>] ? __atomic_notifier_call_chain+0x0/0x86
[ 24.549177] [<ffffffff81060d07>] atomic_notifier_call_chain+0xf/0x11
[ 24.549177] [<ffffffff81060d37>] notify_die+0x2e/0x30
[ 24.549177] [<ffffffff81004956>] default_do_nmi+0x57/0x1ee
[ 24.549177] [<ffffffff81004b4d>] do_nmi+0x60/0x9b
[ 24.549177] [<ffffffff81b8ba60>] nmi+0x20/0x39
[ 24.549177] <<EOE>>
[ 27.441794] eth1: link down
[ 27.458743] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.387104] EXT3-fs (sda6): using internal journal
[ 35.414147] mount used greatest stack depth: 3600 bytes left
[ 35.521798] kjournald starting. Commit interval 5 seconds
[ 35.527252] EXT3-fs (sda5): using internal journal
[ 35.532209] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 36.525808] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
[ 36.734110] rc.sysinit used greatest stack depth: 3408 bytes left
[ 38.166216] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
[ 38.310012] eth0: no IPv6 routers present
[ 42.055609] device: 'vcs3': device_add
[ 42.055893] PM: Adding info for No Bus:vcs3
[ 42.057329] device: 'vcsa3': device_add
[ 42.057672] PM: Adding info for No Bus:vcsa3
[ 42.076450] device: 'vcs4': device_add
[ 42.076713] PM: Adding info for No Bus:vcs4
[ 42.078157] device: 'vcsa4': device_add
[ 42.078465] PM: Adding info for No Bus:vcsa4
[ 42.097804] device: 'vcs2': device_add
[ 42.098188] PM: Adding info for No Bus:vcs2
[ 42.098330] device: 'vcsa2': device_add
[ 42.098589] PM: Adding info for No Bus:vcsa2
[ 42.100148] device: 'vcs5': device_add
[ 42.100398] PM: Adding info for No Bus:vcs5
[ 42.100470] device: 'vcsa5': device_add
[ 42.100683] PM: Adding info for No Bus:vcsa5
[ 42.102092] device: 'vcs6': device_add
[ 42.102334] PM: Adding info for No Bus:vcs6
[ 42.102422] device: 'vcsa6': device_add
[ 42.102638] PM: Adding info for No Bus:vcsa6
next prev parent reply other threads:[~2010-02-14 18:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-12 22:19 [PATCH 1/4] nmi_watchdog: use a boolean config flag for compiling Don Zickus
2010-02-12 22:19 ` [PATCH 2/4] nmi_watchdog: compile and portability fixes Don Zickus
2010-02-14 9:13 ` [tip:perf/nmi] nmi_watchdog: Compile " tip-bot for Don Zickus
2010-02-12 22:19 ` [PATCH 3/4] nmi_watchdog: fallback to software events when no hardware pmu detected Don Zickus
2010-02-14 9:13 ` [tip:perf/nmi] nmi_watchdog: Fallback " tip-bot for Don Zickus
2010-02-15 0:33 ` [PATCH 3/4] nmi_watchdog: fallback " Paul Mackerras
2010-02-15 15:38 ` Don Zickus
2010-02-12 22:19 ` [PATCH 4/4] [RFC][powerpc] nmi_watchdog: support for powerpc Don Zickus
2010-02-14 9:12 ` [tip:perf/nmi] nmi_watchdog: Use a boolean config flag for compiling tip-bot for Don Zickus
2010-02-14 16:59 ` [PATCH 1/4] nmi_watchdog: use " Ingo Molnar
2010-02-14 18:12 ` Ingo Molnar [this message]
2010-02-15 23:02 ` Don Zickus
2010-02-15 17:51 ` Don Zickus
2010-02-15 18:13 ` Cyrill Gorcunov
2010-02-15 18:21 ` Cyrill Gorcunov
2010-02-15 18:45 ` Don Zickus
2010-02-16 14:30 ` Ingo Molnar
2010-02-18 19:27 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100214181219.GA27839@elte.hu \
--to=mingo@elte.hu \
--cc=aris@redhat.com \
--cc=dzickus@redhat.com \
--cc=gorcunov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox