linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] omap fix for 2.6.33-rc8
Date: Thu, 18 Feb 2010 12:29:11 -0800	[thread overview]
Message-ID: <20100218202911.GS21755@atomide.com> (raw)

Hi Linus,

Please pull one more omap fix from:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-fixes-for-linus

Regards,

Tony


The following changes since commit 724e6d3fe8003c3f60bf404bf22e4e331327c596:
  Linus Torvalds (1):
        Linux 2.6.33-rc8

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-fixes-for-linus

Ranjith Lohithakshan (1):
      omap: Remove DEBUG_FS dependency for mux name checking

 arch/arm/mach-omap2/mux.c |   12 +++++-------
 1 files changed, 5 insertions(+), 7 deletions(-)


From: Ranjith Lohithakshan <ranjithl@ti.com>
Date: Wed, 17 Feb 2010 17:17:01 +0000
Subject: [PATCH] omap: Remove DEBUG_FS dependency for mux name checking

The check for a valid mux name should be performed regardless of whether
DEBUG_FS is enabled or not. Otherwise without DEBUG_FS, we get:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.33-rc8 #10)
PC is at strcmp+0x18/0x40
LR is at omap_mux_init_signal+0x68/0x14c
...

This fixes the issue currently seen with boards not booting up
if DEBUG_FS is not enabled in defconfig.

Note that the earlier ifndef + ifdef now becomes simpler ifdef else:
If CONFIG_OMAP_MUX is selected, we use pin names. If it's not selected,
we only want the GPIO to mux register mapping.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 5fedc50..5fef73f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
-		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
 			superset++;
 			continue;
 		}
-#endif
-
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
-		if (!superset->muxnames || !superset->muxnames[0]) {
+#else
+		/* Skip pins that are not muxed as GPIO by bootloader */
+		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
 			continue;
 		}
The following changes since commit 724e6d3fe8003c3f60bf404bf22e4e331327c596:
  Linus Torvalds (1):
        Linux 2.6.33-rc8

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-fixes-for-linus

Ranjith Lohithakshan (1):
      omap: Remove DEBUG_FS dependency for mux name checking

 arch/arm/mach-omap2/mux.c |   12 +++++-------
 1 files changed, 5 insertions(+), 7 deletions(-)


From: Ranjith Lohithakshan <ranjithl@ti.com>
Date: Wed, 17 Feb 2010 17:17:01 +0000
Subject: [PATCH] omap: Remove DEBUG_FS dependency for mux name checking

The check for a valid mux name should be performed regardless of whether
DEBUG_FS is enabled or not. Otherwise without DEBUG_FS, we get:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.33-rc8 #10)
PC is at strcmp+0x18/0x40
LR is at omap_mux_init_signal+0x68/0x14c
...

This fixes the issue currently seen with boards not booting up
if DEBUG_FS is not enabled in defconfig.

Note that the earlier ifndef + ifdef now becomes simpler ifdef else:
If CONFIG_OMAP_MUX is selected, we use pin names. If it's not selected,
we only want the GPIO to mux register mapping.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 5fedc50..5fef73f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
-		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
 			superset++;
 			continue;
 		}
-#endif
-
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
-		if (!superset->muxnames || !superset->muxnames[0]) {
+#else
+		/* Skip pins that are not muxed as GPIO by bootloader */
+		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
 			continue;
 		}

                 reply	other threads:[~2010-02-18 20:28 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100218202911.GS21755@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).