Re: usbmc seems broken

[Greg KH <greg@kroah.com>]

On Thu, Feb 04, 2010 at 08:32:21AM +0000, Neil Kalo wrote:
> Upgraded to: 2.6.32.7-37.fc12.i686.PAE
> 
> Still no joy. Plugging in the meter gives:
> 
> Feb  4 08:27:04 localhost kernel: usb 4-1: new full speed USB device
> using ohci_hcd and address 2
> Feb  4 08:27:04 localhost kernel: usb 4-1: New USB device found,
> idVendor=05e6, idProduct=2100
> Feb  4 08:27:04 localhost kernel: usb 4-1: New USB device strings:
> Mfr=2, Product=3, SerialNumber=1
> Feb  4 08:27:04 localhost kernel: usb 4-1: Product: 2100 Multimeter
> Feb  4 08:27:04 localhost kernel: usb 4-1: Manufacturer: KEITHLEY INSTRUMENTS
> Feb  4 08:27:04 localhost kernel: usb 4-1: SerialNumber: 1160791
> Feb  4 08:27:04 localhost kernel: usb 4-1: configuration #1 chosen from 1 choice
> Feb  4 08:27:04 localhost kernel: usbcore: registered new interface
> driver usbtmc
> 
> But "cat /dev/usbtmc0" gives:
> cat: /dev/usbtmc0: Connection timed out
> 
> And in the logs:
> Feb  4 08:27:35 localhost kernel: usbtmc 4-1:1.0: Unable to read data,
> error -110
> 
> The very old driver still works:
> 
> Feb  4 08:31:02 localhost kernel: USBTMC: MKDEV
> Feb  4 08:31:02 localhost kernel: USBTMC: CDEV_ADD f900000 1
> Feb  4 08:31:02 localhost kernel: usbcore: registered new interface
> driver USBTMC
> 
> [root@mc22 usbtmc-module]# cat /dev/usbtmc0
> Minor Number    Manufacturer    Product Serial Number
> 001     KEITHLEY INSTRUMENTS    2100 Multimeter 1160791

Care to try to figure out what is going wrong here and send a patch?

thanks,

greg k-h