From: Samuel Ortiz <sameo@linux.intel.com>
To: mturquette@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
Mike Turquette <mturquette@ti.com>
Subject: Re: [PATCH] MFD: TWL4030: introduce remove_script function
Date: Sun, 28 Feb 2010 23:54:07 +0100 [thread overview]
Message-ID: <20100228225406.GA3391@sortiz.org> (raw)
In-Reply-To: <1266858990-3915-1-git-send-email-mturquette@ti.com>
Hi Mike,
On Mon, Feb 22, 2010 at 11:16:30AM -0600, mturquette@gmail.com wrote:
> From: Mike Turquette <mturquette@ti.com>
>
> New function twl4030_remove_script(u8 flags) takes a script type as
> defined in twl.h and prevents any script already loaded in that position
> from running. This is accomplished by programming SEQ_ADD_* to 0x3f,
> the END_OF_SCRIPT value, where SEQ_ADD_* is determined by flags.
Patch applied, thanks a lot.
Cheers,
Samuel.
> Signed-off-by: Mike Turquette <mturquette@ti.com>
> ---
>
> Based on MFD for-next branch.
>
> Future users of this function include OMAP board files for machines
> facing a race condition between sleep and warm reset.
>
> drivers/mfd/twl4030-power.c | 50 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c/twl.h | 1 +
> 2 files changed, 51 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index 5b045ff..7efa878 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -461,6 +461,56 @@ out:
> return err;
> }
>
> +int twl4030_remove_script(u8 flags)
> +{
> + int err = 0;
> +
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
> + R_PROTECT_KEY);
> + if (err) {
> + pr_err("twl4030: unable to unlock PROTECT_KEY\n");
> + return err;
> + }
> +
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
> + R_PROTECT_KEY);
> + if (err) {
> + pr_err("twl4030: unable to unlock PROTECT_KEY\n");
> + return err;
> + }
> +
> + if (flags & TWL4030_WRST_SCRIPT) {
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
> + R_SEQ_ADD_WARM);
> + if (err)
> + return err;
> + }
> + if (flags & TWL4030_WAKEUP12_SCRIPT) {
> + if (err)
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
> + R_SEQ_ADD_S2A12);
> + return err;
> + }
> + if (flags & TWL4030_WAKEUP3_SCRIPT) {
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
> + R_SEQ_ADD_S2A3);
> + if (err)
> + return err;
> + }
> + if (flags & TWL4030_SLEEP_SCRIPT) {
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
> + R_SEQ_ADD_A2S);
> + if (err)
> + return err;
> + }
> +
> + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
> + if (err)
> + pr_err("TWL4030 Unable to relock registers\n");
> +
> + return err;
> +}
> +
> void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
> {
> int err = 0;
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 33d9d5c..d4baff8 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -550,6 +550,7 @@ struct twl4030_power_data {
> };
>
> extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
> +extern int twl4030_remove_script(u8 flags);
>
> struct twl4030_codec_audio_data {
> unsigned int audio_mclk;
> --
> 1.6.3.2
>
--
Intel Open Source Technology Centre
http://oss.intel.com/
prev parent reply other threads:[~2010-02-28 22:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-22 17:16 [PATCH] MFD: TWL4030: introduce remove_script function mturquette
2010-02-28 22:54 ` Samuel Ortiz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100228225406.GA3391@sortiz.org \
--to=sameo@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@gmail.com \
--cc=mturquette@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox