From: Stephen Hemminger <shemminger@vyatta.com>
To: Greg KH <gregkh@suse.de>, "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, stable@kernel.org,
akpm@linux-foundation.org, torvalds@linux-foundation.org,
Roger Oksanen <roger.oksanen@cs.helsinki.fi>
Subject: Re: [Stable-review] [19/39] e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure
Date: Mon, 15 Mar 2010 14:29:53 -0700 [thread overview]
Message-ID: <20100315142953.7aae4395@nehalam> (raw)
In-Reply-To: <20100105200301.449062585@mini.kroah.org>
On Tue, 05 Jan 2010 12:02:15 -0800
Greg KH <gregkh@suse.de> wrote:
> 2.6.31-stable review patch. If anyone has any objections, please let us know.
>
> ------------------
>
> From: Roger Oksanen <roger.oksanen@cs.helsinki.fi>
>
> commit 98468efddb101f8a29af974101c17ba513b07be1 upstream.
>
> pci_alloc_consistent uses GFP_ATOMIC allocation that may fail on some systems
> with limited memory (Bug #14265). pci_pool_alloc allows waiting with
> GFP_KERNEL.
>
> Tested-by: Karol Lewandowski <karol.k.lewandowski@gmail.com>
> Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These two e100 patches in 2.6.31.10 (and 2.6.32) caused kernel panic on one customer
system. I recommend they be reverted in next --stable update.
The user system configuration and backtrace were.
---
# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: ASUSTeK Computer Inc. A7V266-E Mainboard
Flags: bus master, medium devsel, latency 0
Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [80] Power Management version 2
Kernel modules: shpchp
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: ASUSTeK Computer Inc. CMI8738 6ch-MX
Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
00:06.0 Mass storage controller: Promise Technology, Inc. PDC20265 (FastTrak100 Lite/Ultra100) (rev 02)
Subsystem: Promise Technology, Inc. Ultra100
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at d400 [size=8]
I/O ports at d000 [size=4]
I/O ports at b800 [size=8]
I/O ports at b400 [size=4]
I/O ports at b000 [size=64]
Memory at fb000000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at 80020000 [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Kernel driver in use: pata_pdc202xx_old
Kernel modules: pata_pdc202xx_old
00:0c.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if 00 [VGA controller])
Subsystem: S3 Inc. ViRGE/DX
Flags: bus master, medium devsel, latency 32, IRQ 12
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at 80030000 [disabled] [size=64K]
Kernel modules: s3fb
00:0e.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop Adapter
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f3800000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a800 [size=64]
Memory at f3000000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at 80040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
Kernel modules: e100
00:0f.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
Memory at f2800000 (32-bit, non-prefetchable) [size=128K]
Memory at f2000000 (32-bit, non-prefetchable) [size=128K]
I/O ports at a400 [size=64]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Kernel driver in use: e1000
Kernel modules: e1000
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: ASUSTeK Computer Inc. VT8233A
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
Kernel modules: i2c-viapro
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at a000 [size=16]
Capabilities: [c0] Power Management version 2
Kernel driver in use: pata_via
Kernel modules: pata_via
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at 9800 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at 9400 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at 9000 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
Code:
[ 849.707104] BUG: unable to handle kernel NULL pointer dereference at 00000002
[ 849.711050] IP: [<f7ca63e0>] e100_exec_cb+0x6b/0xd8 [e100]
[ 849.711050] *pde = 00000000
[ 849.711050] Thread overran stack, or stack corrupted
[ 849.711050] Oops: 0002 [#1] SMP
[ 849.711050] last sysfs file: /sys/class/i2c-adapter/i2c-0/name
[ 849.711050] Modules linked in: ip_gre xt_comment unionfs iptable_nat iptable_filter ip6table_filter ip6table_raw ip6_tables xt_NOTRACK iptable_raw ip_tables x_tables nf_nat_pptp nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_h323 nf_conntrack_h323 nf_nat_sip nf_conntrack_sip nf_nat_proto_gre nf_nat_tftp nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_ftp nf_conntrack ipv6 evdev serio_raw parport_pc pcspkr parport processor button i2c_viapro shpchp i2c_core pci_hotplug via_agp agpgart ext3 jbd mbcache raid6_pq async_xor async_memcpy async_tx xor md_mod sg usb_storage sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic pata_pdc202xx_old pata_via uhci_hcd libata usbcore nls_base e1000 e100 mii scsi_mod thermal fan thermal_sys [last unloaded: raid10]
[ 849.711050]
[ 849.711050] Pid: 0, comm: swapper Tainted: G W (2.6.31-1-586-vyatta #1) System Name
[ 849.711050] EIP: 0060:[<f7ca63e0>] EFLAGS: 00010006 CPU: 0
[ 849.711050] EIP is at e100_exec_cb+0x6b/0xd8 [e100]
[ 849.711050] EAX: 00000000 EBX: f67dffe0 ECX: 000004ce EDX: 36697510
[ 849.711050] ESI: f6d8e340 EDI: 00000000 EBP: f67310c0 ESP: c12d1ca0
[ 849.711050] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 849.711050] Process swapper (pid: 0, ti=c12d0000 task=c12febc0 task.ti=c12d0000)
[ 849.711050] Stack:
[ 849.711050] f7ca5190 f6d8e380 00000286 f6d8e000 f6d8e340 f67310c0 f6d8e000 f7ca68a5
[ 849.711050] <0> 00000000 f67310c0 c132d150 c11a3bb8 f64b9b80 f7ca83b8 00000004 00000000
[ 849.711050] <0> f64b9b80 f66b4100 f67310c0 c11b14a3 000218d2 f66b415c f6d8e000 f64b9b80
[ 849.711050] Call Trace:
[ 849.711050] [<f7ca5190>] ? e100_xmit_prepare+0x0/0x97 [e100]
[ 849.711050] [<f7ca68a5>] ? e100_xmit_frame+0x5b/0xd9 [e100]
[ 849.711050] [<c11a3bb8>] ? dev_hard_start_xmit+0x205/0x298
[ 849.711050] [<c11b14a3>] ? __qdisc_run+0xbd/0x196
[ 849.711050] [<c11a3f6d>] ? dev_queue_xmit+0x243/0x336
[ 849.711050] [<c11c2098>] ? ip_finish_output2+0x189/0x1c4
[ 849.711050] [<c11c15d8>] ? ip_local_out+0x15/0x17
[ 849.711050] [<c11c1d8f>] ? ip_queue_xmit+0x2f4/0x338
[ 849.711050] [<c101c15f>] ? activate_task+0x1c/0x21
[ 849.711050] [<c1026086>] ? try_to_wake_up+0x193/0x19d
[ 849.711050] [<c10a4a2e>] ? pollwake+0x5d/0x67
[ 849.711050] [<c11d3c46>] ? tcp_v4_send_check+0x7a/0xb0
[ 849.711050] [<c11d0833>] ? tcp_transmit_skb+0x5c9/0x602
[ 849.711050] [<c11d09d8>] ? tcp_send_ack+0xcf/0xd3
[ 849.711050] [<c11cef3d>] ? tcp_rcv_established+0x383/0x4cd
[ 849.711050] [<c11d50a2>] ? tcp_v4_do_rcv+0x151/0x2a1
[ 849.711050] [<c11d5592>] ? tcp_v4_rcv+0x3a0/0x594
[ 849.711050] [<c11be22e>] ? ip_local_deliver_finish+0xca/0x14e
[ 849.711050] [<c11bdeb5>] ? ip_rcv_finish+0x295/0x2a9
[ 849.711050] [<c11a3168>] ? netif_receive_skb+0x3cb/0x3e6
[ 849.711050] [<f7ca7afb>] ? e100_poll+0x184/0x29d [e100]
[ 849.711050] [<c11a36b9>] ? net_rx_action+0x91/0x173
[ 849.711050] [<c102e431>] ? __do_softirq+0xa5/0x147
[ 849.711050] [<c102e4f6>] ? do_softirq+0x23/0x27
[ 849.711050] [<c102e5d3>] ? irq_exit+0x26/0x53
[ 849.711050] [<c10043fd>] ? do_IRQ+0x78/0x89
[ 849.711050] [<c1002fe9>] ? common_interrupt+0x29/0x30
[ 849.711050] [<c10085ae>] ? default_idle+0x3e/0x5c
[ 849.711050] [<c1001c5c>] ? cpu_idle+0x41/0x5d
[ 849.711050] [<c132e744>] ? start_kernel+0x29c/0x29f
[ 849.711050] Code: 89 86 8c 00 00 00 89 f0 89 ab 2c 02 00 00 83 7e 50 01 19 ff 83 e7 e4 ff 14 24 66 81 4b 02 00 40 0f ae f8 8b c0 8b 83 24 02 00 00 <66> 81 60 02 ff bf eb 40 8b 88 28 02 00 00 89 f0 0f b6 56 4c e8
[ 849.711050] EIP: [<f7ca63e0>] e100_exec_cb+0x6b/0xd8 [e100] SS:ESP 0068:c12d1ca0
[ 849.711050] CR2: 0000000000000002
[ 849.711050] ---[ end trace 4eaa2a86a8e2da24 ]---
[ 849.711050] Kernel panic - not syncing: Fatal exception in interrupt
[ 849.711050] Pid: 0, comm: swapper Tainted: G D W 2.6.31-1-586-vyatta #1
[ 849.711050] Call Trace:
[ 849.711050] [<c120bee2>] ? panic+0x38/0xd1
[ 849.711050] [<c100581c>] ? oops_end+0x6c/0x76
[ 849.711050] [<c1017f6a>] ? no_context+0x105/0x10e
[ 849.711050] [<c101809b>] ? __bad_area_nosemaphore+0x128/0x133
[ 849.711050] [<c101c15f>] ? activate_task+0x1c/0x21
[ 849.711050] [<f7f3f5de>] ? ipt_do_table+0x4b2/0x4f0 [ip_tables]
[ 849.711050] [<f7ca5e09>] ? e100_exec_cmd+0x7f/0x88 [e100]
[ 849.711050] [<f7ca6443>] ? e100_exec_cb+0xce/0xd8 [e100]
[ 849.711050] [<c10181ce>] ? do_page_fault+0x0/0x270
[ 849.711050] [<c10180b0>] ? bad_area_nosemaphore+0xa/0xc
[ 849.711050] [<c120dac6>] ? error_code+0x66/0x70
[ 849.711050] [<c10181ce>] ? do_page_fault+0x0/0x270
[ 849.711050] [<f7ca63e0>] ? e100_exec_cb+0x6b/0xd8 [e100]
[ 849.711050] [<f7ca5190>] ? e100_xmit_prepare+0x0/0x97 [e100]
[ 849.711050] [<f7ca68a5>] ? e100_xmit_frame+0x5b/0xd9 [e100]
[ 849.711050] [<c11a3bb8>] ? dev_hard_start_xmit+0x205/0x298
[ 849.711050] [<c11b14a3>] ? __qdisc_run+0xbd/0x196
[ 849.711050] [<c11a3f6d>] ? dev_queue_xmit+0x243/0x336
[ 849.711050] [<c11c2098>] ? ip_finish_output2+0x189/0x1c4
[ 849.711050] [<c11c15d8>] ? ip_local_out+0x15/0x17
[ 849.711050] [<c11c1d8f>] ? ip_queue_xmit+0x2f4/0x338
[ 849.711050] [<c101c15f>] ? activate_task+0x1c/0x21
[ 849.711050] [<c1026086>] ? try_to_wake_up+0x193/0x19d
[ 849.711050] [<c10a4a2e>] ? pollwake+0x5d/0x67
[ 849.711050] [<c11d3c46>] ? tcp_v4_send_check+0x7a/0xb0
[ 849.711050] [<c11d0833>] ? tcp_transmit_skb+0x5c9/0x602
[ 849.711050] [<c11d09d8>] ? tcp_send_ack+0xcf/0xd3
[ 849.711050] [<c11cef3d>] ? tcp_rcv_established+0x383/0x4cd
[ 849.711050] [<c11d50a2>] ? tcp_v4_do_rcv+0x151/0x2a1
[ 849.711050] [<c11d5592>] ? tcp_v4_rcv+0x3a0/0x594
[ 849.711050] [<c11be22e>] ? ip_local_deliver_finish+0xca/0x14e
[ 849.711050] [<c11bdeb5>] ? ip_rcv_finish+0x295/0x2a9
[ 849.711050] [<c11a3168>] ? netif_receive_skb+0x3cb/0x3e6
[ 849.711050] [<f7ca7afb>] ? e100_poll+0x184/0x29d [e100]
[ 849.711050] [<c11a36b9>] ? net_rx_action+0x91/0x173
[ 849.711050] [<c102e431>] ? __do_softirq+0xa5/0x147
[ 849.711050] [<c102e4f6>] ? do_softirq+0x23/0x27
[ 849.711050] [<c102e5d3>] ? irq_exit+0x26/0x53
[ 849.711050] [<c10043fd>] ? do_IRQ+0x78/0x89
[ 849.711050] [<c1002fe9>] ? common_interrupt+0x29/0x30
[ 849.711050] [<c10085ae>] ? default_idle+0x3e/0x5c
[ 849.711050] [<c1001c5c>] ? cpu_idle+0x41/0x5d
[ 849.711050] [<c132e744>] ? start_kernel+0x29c/0x29f
[ 849.711050] Rebooting in 60 seconds..
next prev parent reply other threads:[~2010-03-15 21:30 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-05 19:50 [00/10] 2.6.27.43 stable review Greg KH
2010-01-05 19:47 ` [01/10] Libertas: fix buffer overflow in lbs_get_essid() Greg KH
2010-01-05 19:47 ` [02/10] pata_cmd64x: fix overclocking of UDMA0-2 modes Greg KH
2010-01-05 19:47 ` [03/10] sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer Greg KH
2010-01-05 19:47 ` [04/10] i2c/tsl2550: Fix lux value in extended mode Greg KH
2010-01-05 19:47 ` [05/10] ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery Greg KH
2010-01-05 19:47 ` [06/10] S390: dasd: support DIAG access for read-only devices Greg KH
2010-01-05 19:47 ` [07/10] x86/ptrace: make genregs[32]_get/set more robust Greg KH
2010-01-05 19:47 ` [08/10] rt2x00: Disable powersaving for rt61pci and rt2800pci Greg KH
2010-01-05 20:58 ` Gertjan van Wingerde
2010-01-05 21:21 ` Greg KH
2010-01-05 19:48 ` [09/10] generic_permission: MAY_OPEN is not write access Greg KH
2010-01-05 19:48 ` [10/10] Revert: KVM: MMU: do not free active mmu pages in free_mmu_pages() Greg KH
2010-01-05 20:01 ` [01/39] acerhdf: limit modalias matching to supported Greg KH
2010-01-05 20:01 ` [02/39] ASoC: Do not write to invalid registers on the wm9712 Greg KH
2010-01-05 20:01 ` [03/39] cifs: NULL out tcon, pSesInfo, and srvTcp pointers when chasing DFS referrals Greg KH
2010-01-05 20:02 ` [04/39] clockevents: Prevent clockevent_devices list corruption on cpu hotplug Greg KH
2010-01-05 20:02 ` [05/39] dma: at_hdmac: correct incompatible type for argument 1 of spin_lock_bh Greg KH
2010-01-05 20:02 ` [06/39] drivers/net/usb: Correct code taking the size of a pointer Greg KH
2010-01-05 20:02 ` [07/39] iwmc3200wifi: fix array out-of-boundary access Greg KH
2010-01-06 2:52 ` Zhu Yi
2010-01-06 18:01 ` Greg KH
2010-01-06 18:27 ` [stable] " Greg KH
2010-01-05 20:02 ` [08/39] Libertas: fix buffer overflow in lbs_get_essid() Greg KH
2010-01-05 20:02 ` [09/39] md: Fix unfortunate interaction with evms Greg KH
2010-01-05 20:02 ` [10/39] pata_cmd64x: fix overclocking of UDMA0-2 modes Greg KH
2010-01-05 20:02 ` [11/39] pata_hpt3x2n: fix clock turnaround Greg KH
2010-01-05 20:02 ` [12/39] SCSI: fc class: fix fc_transport_init error handling Greg KH
2010-01-05 20:02 ` [13/39] sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM buffer Greg KH
2010-01-05 20:02 ` [14/39] USB: emi62: fix crash when trying to load EMI 6|2 firmware Greg KH
2010-01-05 20:02 ` [15/39] USB: Fix a bug on appledisplay.c regarding signedness Greg KH
2010-01-05 20:02 ` [16/39] USB: musb: gadget_ep0: avoid SetupEnd interrupt Greg KH
2010-01-05 20:02 ` [17/39] USB: option: support hi speed for modem Haier CE100 Greg KH
2010-01-05 20:02 ` [18/39] x86, cpuid: Add "volatile" to asm in native_cpuid() Greg KH
2010-01-05 20:02 ` [19/39] e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure Greg KH
2010-03-15 21:29 ` Stephen Hemminger [this message]
2010-03-15 21:32 ` [Stable-review] " David Miller
2010-03-15 21:36 ` Stephen Hemminger
2010-03-15 21:39 ` David Miller
2010-03-15 22:20 ` David Miller
2010-03-15 22:25 ` Stephen Hemminger
2010-01-05 20:02 ` [20/39] e100: Fix broken cbs accounting due to missing memset Greg KH
2010-01-05 20:02 ` [21/39] hostap: Revert a toxic part of the conversion to net_device_ops Greg KH
2010-01-05 20:02 ` [22/39] hwmon: (fschmd) Fix check on unsigned in watchdog_write() Greg KH
2010-01-05 20:02 ` [23/39] hwmon: (sht15) Off-by-one error in array index + incorrect constants Greg KH
2010-01-05 20:02 ` [24/39] i2c/tsl2550: Fix lux value in extended mode Greg KH
2010-01-05 20:02 ` [25/39] ipv6: reassembly: use seperate reassembly queues for conntrack and local delivery Greg KH
2010-01-05 20:02 ` [26/39] S390: dasd: support DIAG access for read-only devices Greg KH
2010-01-05 20:02 ` [27/39] udf: Try harder when looking for VAT inode Greg KH
2010-01-05 20:02 ` [28/39] V4L/DVB (13596): ov511.c typo: lock => unlock Greg KH
2010-01-05 20:02 ` [29/39] x86/ptrace: make genregs[32]_get/set more robust Greg KH
2010-01-05 20:02 ` [30/39] XFS bug in log recover with quota (bugzilla id 855) Greg KH
2010-01-05 20:02 ` [31/39] generic_permission: MAY_OPEN is not write access Greg KH
2010-01-05 20:02 ` [32/39] rt2x00: Disable powersaving for rt61pci and rt2800pci Greg KH
2010-01-05 20:59 ` Gertjan van Wingerde
2010-01-05 21:21 ` Greg KH
2010-01-05 20:02 ` [33/39] memcg: avoid oom-killing innocent task in case of use_hierarchy Greg KH
2010-01-05 20:02 ` [34/39] Input: atkbd - add force relese key quirk for Samsung R59P/R60P/R61P Greg KH
2010-01-05 20:02 ` [35/39] Add unlocked version of inode_add_bytes() function Greg KH
2010-01-05 20:02 ` [36/39] quota: decouple fs reserved space from quota reservation Greg KH
2010-01-05 20:02 ` [37/39] ext4: Convert to generic reserved quotas space management Greg KH
2010-01-05 20:02 ` [38/39] ext4: Fix potential quota deadlock Greg KH
2010-01-05 20:02 ` [39/39] ext4: fix sleep inside spinlock issue with quota and dealloc (#14739) Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100315142953.7aae4395@nehalam \
--to=shemminger@vyatta.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=roger.oksanen@cs.helsinki.fi \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox