From: Andy Isaacson <adi@hexapodia.org>
To: Yinghai Lu <yinghai.lu@oracle.com>
Cc: guenter.roeck@ericsson.com, "H. Peter Anvin" <hpa@zytor.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Bjorn Helgaas <bjorn.helgaas@hp.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"x86@kernel.org" <x86@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Thomas Renninger <trenn@suse.de>
Subject: Re: [PATCH] x86: Reserve legacy VGA MMIO area for x86_64 as well as x86_32
Date: Fri, 9 Apr 2010 15:35:32 -0700 [thread overview]
Message-ID: <20100409223532.GC11130@hexapodia.org> (raw)
In-Reply-To: <4BBFA9BF.60608@oracle.com>
On Fri, Apr 09, 2010 at 03:27:11PM -0700, Yinghai Lu wrote:
> > On Fri, Apr 09, 2010 at 12:55:39PM -0700, Yinghai wrote:
> >> update version for test
> >>
> >> Subject: [PATCH] x86: reserve [0xa0000, 0x100000] in e820
> >>
> >> Update e820 at first, and later put them resource tree.
> >> But give pci BAR chance to claim the range, before assign unassigned resources.
> >>
> >> In case some system doesn't have VGA, and use [0xa0000, ..] for mmio of some
> >> other pci devices.
> >>
> > This doesn't help, my AHCI still fails to initialize in the same way.
> >
> >
> bootlog?
>
> what is the address used for AHCI?
Full bootlog attached to
https://bugzilla.kernel.org/show_bug.cgi?id=15744
Snippets:
[ 0.000000] BIOS-e820: 00000000bfe55c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bc000000 (usable)
--
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfe01000 - 00000000bfe02000
[ 0.000000] PM: Registered nosave memory: 00000000bfe02000 - 00000000bfe53000
[ 0.000000] PM: Registered nosave memory: 00000000bfe53000 - 00000000bfe54000
--
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
--
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
--
[ 0.684251] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.702226] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.703002] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.704003] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.705002] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
[ 0.706002] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.707001] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
--
[ 2.059784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.065789] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.070538] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.074594] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.075003] vgaarb: loaded
[ 2.076073] SCSI subsystem initialized
[ 2.077055] usbcore: registered new interface driver usbfs
[ 2.078024] usbcore: registered new interface driver hub
--
[ 2.247143] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 2.255207] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 2.261473] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff]
[ 2.267740] pci 0000:00:1f.2: BAR 5: assigned [mem 0x000a0000-0x000a07ff]
[ 2.274701] pci 0000:00:1f.2: BAR 5: set to [mem 0x000a0000-0x000a07ff] (PCI address [0xa0000-0xa07ff]
[ 2.284326] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.289725] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 2.295992] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
--
[ 4.376870] brd: module loaded
[ 4.381469] loop: module loaded
[ 4.384915] Loading iSCSI transport class v2.0-870.
[ 4.390597] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 4.397684] ahci: SSS flag set, parallel bus scan disabled
[ 5.405019] ahci 0000:00:1f.2: controller reset failed (0xffffffff)
[ 5.411473] ahci 0000:00:1f.2: PCI INT C disabled
[ 5.416347] ahci: probe of 0000:00:1f.2 failed with error -5
[ 5.422248] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 5.428859] Copyright (c) 1999-2006 Intel Corporation.
[ 5.434260] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
next prev parent reply other threads:[~2010-04-09 22:35 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-07 21:06 [PATCH] x86: Reserve legacy VGA MMIO area for x86_64 as well as x86_32 Bjorn Helgaas
2010-04-07 22:45 ` Yinghai
2010-04-07 23:05 ` Bjorn Helgaas
2010-04-07 23:22 ` Yinghai
2010-04-08 3:24 ` Bjorn Helgaas
2010-04-08 4:42 ` H. Peter Anvin
2010-04-08 13:04 ` Bjorn Helgaas
2010-04-09 16:04 ` Bjorn Helgaas
2010-04-09 16:44 ` H. Peter Anvin
2010-04-09 17:22 ` Yinghai
2010-04-09 18:23 ` H. Peter Anvin
2010-04-09 18:55 ` Guenter Roeck
2010-04-09 19:55 ` Yinghai
2010-04-09 22:21 ` Andy Isaacson
2010-04-09 22:27 ` Yinghai Lu
2010-04-09 22:35 ` Andy Isaacson [this message]
2010-04-09 22:44 ` H. Peter Anvin
2010-04-09 22:54 ` Yinghai
2010-04-09 23:01 ` Yinghai
2010-04-10 0:00 ` Andy Isaacson
2010-04-10 1:10 ` Yinghai
2010-04-10 1:43 ` Andy Isaacson
2010-04-10 1:48 ` Yinghai
2010-04-10 1:57 ` Andy Isaacson
2010-04-10 2:46 ` Yinghai
2010-04-12 18:54 ` Andy Isaacson
2010-04-12 19:34 ` Yinghai
2010-04-12 19:48 ` Andy Isaacson
2010-04-12 19:55 ` yinghai.lu
2010-04-12 20:02 ` Andy Isaacson
2010-04-12 22:32 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-13 21:02 ` Bjorn Helgaas
2010-04-13 21:08 ` Yinghai
2010-04-13 21:09 ` H. Peter Anvin
2010-04-13 21:11 ` Yinghai
2010-04-13 21:18 ` H. Peter Anvin
2010-04-13 21:22 ` [PATCH -v3 1/3] " Yinghai
2010-04-23 23:30 ` H. Peter Anvin
2010-04-26 15:35 ` Jesse Barnes
2010-04-13 21:23 ` [PATCH -v3 2/3] x86,pci, acpi: host bridge windows inherit BUSY flag from parent Yinghai
2010-04-13 21:24 ` [PATCH -v3 3/3] pci: don't allocate from a BUSY bus resource Yinghai
2010-04-13 21:42 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-13 21:58 ` H. Peter Anvin
2010-04-13 22:29 ` Yinghai
2010-04-13 22:39 ` Yinghai
2010-04-13 22:41 ` H. Peter Anvin
2010-04-13 22:58 ` Yinghai
2010-04-13 23:02 ` H. Peter Anvin
2010-04-13 23:03 ` Yinghai
2010-04-13 23:07 ` H. Peter Anvin
2010-04-13 23:09 ` Yinghai
2010-04-21 5:33 ` [PATCH -v4 1/3] " Yinghai
2010-04-21 5:34 ` [PATCH 2/3] x86, resource: Add reserve_region_with_split_check_child() Yinghai
2010-04-21 5:35 ` [PATCH 3/3] x86,pci,acpi: Handle invalid _CRS Yinghai
2010-04-21 15:21 ` Bjorn Helgaas
2010-04-21 16:45 ` Yinghai Lu
2010-04-21 16:59 ` Bjorn Helgaas
2010-04-21 22:33 ` H. Peter Anvin
2010-04-21 23:04 ` Bjorn Helgaas
2010-04-21 23:10 ` H. Peter Anvin
2010-04-21 23:43 ` Yinghai
2010-04-22 0:02 ` H. Peter Anvin
2010-04-22 0:06 ` Yinghai
2010-04-21 19:31 ` [PATCH -v4 1/3] x86: Reserve [0xa0000, 0x100000] in e820 map Andy Isaacson
2010-04-23 23:05 ` [PATCH] x86/PCI: never allocate PCI MMIO resources below BIOS_END Bjorn Helgaas
2010-04-23 23:44 ` H. Peter Anvin
2010-04-24 0:36 ` Yinghai Lu
2010-04-26 12:50 ` R. Andrew Bailey
2010-04-26 15:40 ` Bjorn Helgaas
2010-04-26 18:34 ` Andy Isaacson
2010-04-26 19:31 ` Jesse Barnes
2010-04-26 20:27 ` Bjorn Helgaas
2010-04-26 20:37 ` Jesse Barnes
2010-04-26 21:07 ` Yinghai
2010-04-26 21:19 ` H. Peter Anvin
2010-04-26 21:12 ` H. Peter Anvin
2010-04-26 21:25 ` Jesse Barnes
2010-04-26 21:44 ` H. Peter Anvin
2010-04-26 21:53 ` Jesse Barnes
2010-04-26 21:59 ` Yinghai Lu
2010-04-26 22:04 ` [PATCH -v5] reserve a0000 - 0x10000 Yinghai
[not found] ` <4BD60CD4.9020708@oracle.com>
2010-04-26 22:04 ` [PATCH -v5 1/3] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-26 22:04 ` [PATCH -v5 2/3] x86: Remove probe_roms for 32bit Yinghai
2010-04-26 22:04 ` [PATCH -v5 3/3] x86, resource: Add reserve_region_with_split_check_child() Yinghai
2010-04-26 21:44 ` [PATCH] x86/PCI: never allocate PCI MMIO resources below BIOS_END jacob pan
2010-04-13 23:03 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map H. Peter Anvin
2010-04-14 0:57 ` Yinghai
2010-04-14 16:55 ` Bjorn Helgaas
2010-04-14 17:21 ` Yinghai Lu
2010-04-14 19:25 ` Andy Isaacson
2010-04-14 19:27 ` Yinghai
2010-04-14 19:43 ` Andy Isaacson
2010-04-14 19:49 ` Yinghai
2010-04-12 22:33 ` [PATCH -v2 2/2] x86,pci, acpi: Inherent BUSY flag when setup_resource for root bus Yinghai
2010-04-12 22:44 ` Jesse Barnes
2010-04-13 21:02 ` Bjorn Helgaas
2010-04-09 20:11 ` [PATCH] x86: Reserve legacy VGA MMIO area for x86_64 as well as x86_32 H. Peter Anvin
2010-04-09 20:31 ` Guenter Roeck
2010-04-09 20:44 ` H. Peter Anvin
2010-04-09 21:01 ` Guenter Roeck
2010-04-09 22:42 ` Alan Cox
2010-04-09 22:42 ` H. Peter Anvin
2010-04-09 22:54 ` Alan Cox
2010-04-09 22:55 ` H. Peter Anvin
2010-04-09 22:51 ` Alan Cox
2010-04-09 22:55 ` H. Peter Anvin
2010-04-07 23:43 ` H. Peter Anvin
2010-04-08 0:19 ` Andy Isaacson
2010-04-08 5:00 ` H. Peter Anvin
2010-04-08 21:40 ` Andy Isaacson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100409223532.GC11130@hexapodia.org \
--to=adi@hexapodia.org \
--cc=bjorn.helgaas@hp.com \
--cc=guenter.roeck@ericsson.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=trenn@suse.de \
--cc=x86@kernel.org \
--cc=yinghai.lu@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox