Re: [PATCH] colibri.h: Fix building for colibri 270...

[Daniel Mack <daniel@caiaq.de>]

On Fri, Apr 16, 2010 at 01:17:58PM +0200, Jakob Viketoft wrote:
> Daniel Mack wrote:
> >On Fri, Apr 16, 2010 at 11:51:10AM +0200, Jakob Viketoft wrote:
> >>The recent addition of (Colibri) PXA3xx specific declarations breaks
> >>the building of the Colibri 270 with similar features.
> >
> >Hmm, I can't see any problem here. Which error did you get? Which boards
> >did you select in your config?
> 
> Hmmm, it appears I was slightly too fast on the trigger there. I
> encountered the problem some time ago when migrating fron 2.6.29 to
> 2.6.33.1 and a quick look made me think there was a linking problem.
> I'm finishing up this project now and wanted to push any relevant
> fixes upstream. However, the problem I seem to be getting is
> something different though:
> 
>   CC      drivers/pcmcia/pxa2xx_colibri.o
> In file included from drivers/pcmcia/pxa2xx_colibri.c:25:
> arch/arm/mach-pxa/include/mach/colibri.h:13: error: expected ')'
> before '*' token
> make[2]: *** [drivers/pcmcia/pxa2xx_colibri.o] Error 1
> make[1]: *** [drivers/pcmcia] Error 2
> make: *** [drivers] Error 2

It seems that mfp_cfg_t is unknown. Does including <mach/mfp.h> from
pxa2xx_colibri.c help? However, I can't see any problem on 2.6.34-rc4,
with or without CONFIG_MMC set, so that might only be related to 2.6.33.
Any change of trying this on a cutting edge tree, just to make sure?

Daniel