Re: [GIT PULL] percpu for v2.6.32

[Robin Holt <holt@sgi.com>]

Mike, if you can not find one, let me know.  I would try the benchmarkers.
IIRC, they may have those already ready to go.

Tejun, I have an SGI Prism at home that is normally powered off.
I could power that up, get you set up to access it, and let you lose.
There are basic commands for using the L2 to power on and off and to
reset.  I think it is currently set up with some bad dimms so I would
need to remove those before this evolution.

I wouldn't mind helping with the patches, but I have no time right
now.

Thanks,
Robin


On Wed, Sep 16, 2009 at 10:28:03AM +0900, Tejun Heo wrote:
> Hello,
> 
> Mike Travis wrote:
> > We certainly have some in our labs but I'm not sure of one that's
> > externally accessible.  If there's a pre-defined test you'd like to
> > run, you can send me the details.  Otherwise, I'll check around and
> > see if there's a system available remotely.
> 
> The proposed broken patch is in the following thread.  It works on ski
> emulator but ski doesn't support SMP, so...
> 
>  http://thread.gmane.org/gmane.linux.kernel.cross-arch/4132
> 
> The patch shouldn't be too broken.  It probably needs slight tweaks
> here and there.  Just testing and providing logs would be helpful
> enough.
> 
> Thanks.
> 
> -- 
> tejun
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/