From: Jens Axboe <jens.axboe@oracle.com>
To: Paolo Minazzi <paolo.minazzi@gmail.com>
Cc: "Jörn Engel" <joern@logfs.org>,
"Linus Torvalds" <torvalds@linux-foundation.org>,
"David Woodhouse" <dwmw2@infradead.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
"Christoph Hellwig" <hch@infradead.org>
Subject: Re: [PATCH 2/2] [MTD] Call bdi_init() and bdi_register()
Date: Tue, 27 Apr 2010 10:16:37 +0200 [thread overview]
Message-ID: <20100427081636.GD27497@kernel.dk> (raw)
In-Reply-To: <z2g4aa525de1004270111r8a9a475fna8715219551a889d@mail.gmail.com>
On Tue, Apr 27 2010, Paolo Minazzi wrote:
> I Jens,
> I'm Paolo Minazzi and I have a problem with logfs and 2.6.34rc5.
> Can I apply the patch to rc5 and make a test on my ARM board ?
> Paolo
Yes please do, below are the collected fixes for mtd in this area. It
should apply to recent -git just fine.
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 82d1e4d..4521b1e 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -4,7 +4,7 @@
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
-mtd-y := mtdcore.o mtdsuper.o mtdbdi.o
+mtd-y := mtdcore.o mtdsuper.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
diff --git a/drivers/mtd/internal.h b/drivers/mtd/internal.h
index c658fe7..e69de29 100644
--- a/drivers/mtd/internal.h
+++ b/drivers/mtd/internal.h
@@ -1,17 +0,0 @@
-/* Internal MTD definitions
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * mtdbdi.c
- */
-extern struct backing_dev_info mtd_bdi_unmappable;
-extern struct backing_dev_info mtd_bdi_ro_mappable;
-extern struct backing_dev_info mtd_bdi_rw_mappable;
diff --git a/drivers/mtd/mtdbdi.c b/drivers/mtd/mtdbdi.c
index 5ca5aed..e69de29 100644
--- a/drivers/mtd/mtdbdi.c
+++ b/drivers/mtd/mtdbdi.c
@@ -1,43 +0,0 @@
-/* MTD backing device capabilities
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/backing-dev.h>
-#include <linux/mtd/mtd.h>
-#include "internal.h"
-
-/*
- * backing device capabilities for non-mappable devices (such as NAND flash)
- * - permits private mappings, copies are taken of the data
- */
-struct backing_dev_info mtd_bdi_unmappable = {
- .capabilities = BDI_CAP_MAP_COPY,
-};
-
-/*
- * backing device capabilities for R/O mappable devices (such as ROM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_ro_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
-};
-
-/*
- * backing device capabilities for writable mappable devices (such as RAM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_rw_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
- BDI_CAP_WRITE_MAP),
-};
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 5b38b17..b177e75 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,6 +2,9 @@
* Core registration and callback routines for MTD
* drivers and users.
*
+ * bdi bits are:
+ * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
*/
#include <linux/module.h>
@@ -16,11 +19,39 @@
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
#include <linux/proc_fs.h>
+#include <linux/backing-dev.h>
#include <linux/mtd/mtd.h>
-#include "internal.h"
#include "mtdcore.h"
+/*
+ * backing device capabilities for non-mappable devices (such as NAND flash)
+ * - permits private mappings, copies are taken of the data
+ */
+struct backing_dev_info mtd_bdi_unmappable = {
+ .capabilities = BDI_CAP_MAP_COPY,
+};
+
+/*
+ * backing device capabilities for R/O mappable devices (such as ROM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_ro_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
+};
+
+/*
+ * backing device capabilities for writable mappable devices (such as RAM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_rw_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
+ BDI_CAP_WRITE_MAP),
+};
static int mtd_cls_suspend(struct device *dev, pm_message_t state);
static int mtd_cls_resume(struct device *dev);
@@ -628,20 +659,55 @@ done:
/*====================================================================*/
/* Init code */
+static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
+{
+ int ret;
+
+ ret = bdi_init(bdi);
+ if (!ret)
+ ret = bdi_register(bdi, NULL, name);
+
+ if (ret)
+ bdi_destroy(bdi);
+
+ return ret;
+}
+
static int __init init_mtd(void)
{
int ret;
+
ret = class_register(&mtd_class);
+ if (ret)
+ goto err_reg;
+
+ ret = mtd_bdi_init(&mtd_bdi_unmappable, "mtd-unmap");
+ if (ret)
+ goto err_bdi1;
+
+ ret = mtd_bdi_init(&mtd_bdi_ro_mappable, "mtd-romap");
+ if (ret)
+ goto err_bdi2;
+
+ ret = mtd_bdi_init(&mtd_bdi_rw_mappable, "mtd-rwmap");
+ if (ret)
+ goto err_bdi3;
- if (ret) {
- pr_err("Error registering mtd class: %d\n", ret);
- return ret;
- }
#ifdef CONFIG_PROC_FS
if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
proc_mtd->read_proc = mtd_read_proc;
#endif /* CONFIG_PROC_FS */
return 0;
+
+err_bdi3:
+ bdi_destroy(&mtd_bdi_ro_mappable);
+err_bdi2:
+ bdi_destroy(&mtd_bdi_unmappable);
+err_bdi1:
+ class_unregister(&mtd_class);
+err_reg:
+ pr_err("Error registering mtd class or bdi: %d\n", ret);
+ return ret;
}
static void __exit cleanup_mtd(void)
@@ -651,6 +717,9 @@ static void __exit cleanup_mtd(void)
remove_proc_entry( "mtd", NULL);
#endif /* CONFIG_PROC_FS */
class_unregister(&mtd_class);
+ bdi_destroy(&mtd_bdi_unmappable);
+ bdi_destroy(&mtd_bdi_ro_mappable);
+ bdi_destroy(&mtd_bdi_rw_mappable);
}
module_init(init_mtd);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index af8b42e..7c00319 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -13,6 +13,7 @@
#include <linux/mtd/super.h>
#include <linux/namei.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
/*
* compare superblocks to see if they're equivalent
@@ -44,6 +45,7 @@ static int get_sb_mtd_set(struct super_block *sb, void *_mtd)
sb->s_mtd = mtd;
sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
+ sb->s_bdi = mtd->backing_dev_info;
return 0;
}
--
Jens Axboe
next prev parent reply other threads:[~2010-04-27 8:16 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-17 18:40 [PATCH] [MTD] Fix JFFS2 sync silent failure Jörn Engel
2010-04-19 7:38 ` Jens Axboe
2010-04-19 10:15 ` Jörn Engel
2010-04-19 10:20 ` Jens Axboe
2010-04-19 11:39 ` Jörn Engel
2010-04-22 5:54 ` Jörn Engel
2010-04-22 6:26 ` Jörn Engel
2010-04-22 14:25 ` Linus Torvalds
2010-04-22 14:33 ` Linus Torvalds
2010-04-22 16:27 ` Jens Axboe
2010-04-22 20:33 ` [Patch] Catch filesystems lacking s_bdi Jörn Engel
2010-04-23 10:05 ` Jens Axboe
2010-04-23 20:55 ` Jörn Engel
2010-04-26 9:48 ` Jens Axboe
2010-04-26 14:32 ` Jörn Engel
2010-04-26 14:38 ` Jens Axboe
2010-04-26 14:45 ` Jens Axboe
2010-04-26 16:30 ` [PATCH 1/2] [MTD] Move mtd_bdi_*mappable to mtdcore.c Jörn Engel
2010-04-26 16:31 ` [PATCH 2/2] [MTD] Call bdi_init() and bdi_register() Jörn Engel
2010-04-26 17:02 ` Jens Axboe
2010-04-26 17:12 ` Jörn Engel
2010-04-27 7:52 ` Jens Axboe
2010-04-27 8:11 ` Paolo Minazzi
2010-04-27 8:16 ` Jens Axboe [this message]
2010-04-27 11:29 ` Jörn Engel
2010-04-27 11:33 ` Jens Axboe
2010-04-27 9:01 ` Paolo Minazzi
2010-04-27 9:16 ` Jens Axboe
2010-04-27 9:26 ` Paolo Minazzi
2010-04-27 9:29 ` Jens Axboe
2010-04-27 9:36 ` Paolo Minazzi
2010-04-27 11:17 ` Jörn Engel
2010-04-27 11:31 ` Paolo Minazzi
2010-04-27 11:40 ` Jörn Engel
2010-04-27 11:48 ` [PATCH] [LogFS] Return -EINVAL if filesystem image doesn't match Jörn Engel
2010-04-27 12:53 ` Paolo Minazzi
2010-04-27 11:54 ` [PATCH 2/2] [MTD] Call bdi_init() and bdi_register() Paolo Minazzi
2010-04-27 12:05 ` Jörn Engel
2010-04-26 17:01 ` [PATCH 1/2] [MTD] Move mtd_bdi_*mappable to mtdcore.c Jens Axboe
2010-04-26 17:08 ` Jörn Engel
2010-04-26 17:10 ` Jens Axboe
2010-04-22 9:03 ` [PATCH] [MTD] Fix JFFS2 sync silent failure Jens Axboe
2010-04-22 10:39 ` Jens Axboe
2010-04-22 10:58 ` David Woodhouse
2010-04-22 11:05 ` Jens Axboe
2010-04-22 11:55 ` Jörn Engel
2010-04-22 12:08 ` Jens Axboe
2010-04-22 12:17 ` Jörn Engel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100427081636.GD27497@kernel.dk \
--to=jens.axboe@oracle.com \
--cc=dwmw2@infradead.org \
--cc=hch@infradead.org \
--cc=joern@logfs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=paolo.minazzi@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).