From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>,
Andrew Morton <akpm@linux-foundation.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Neil Horman <nhorman@tuxdriver.com>,
"David S. Miller" <davem@davemloft.net>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Subject: [PATCH 2/3] tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
Date: Thu, 06 May 2010 19:05:01 -0400 [thread overview]
Message-ID: <20100506230555.381153062@goodmis.org> (raw)
In-Reply-To: 20100506230459.278936703@goodmis.org
[-- Attachment #1: 0002-tracing-Fix-tracepoint.h-DECLARE_TRACE-to-allow-more.patch --]
[-- Type: text/plain, Size: 7329 bytes --]
From: Steven Rostedt <srostedt@redhat.com>
When more than one header is included under CREATE_TRACE_POINTS
the DECLARE_TRACE() macro is not defined back to its original meaning
and the second include will fail to initialize the TRACE_EVENT()
and DECLARE_TRACE() correctly.
To fix this the tracepoint.h file moves the define of DECLARE_TRACE()
out of the #ifdef _LINUX_TRACEPOINT_H protection (just like the
define of the TRACE_EVENT()). This way the define_trace.h will undef
the DECLARE_TRACE() at the end and allow new headers to start
from scratch.
This patch also requires fixing the include/events/napi.h
It currently uses DECLARE_TRACE() and should be converted to a TRACE_EVENT()
format. But I'll leave that change to the authors of that file.
But since the napi.h file depends on using the CREATE_TRACE_POINTS
and does not define its own DEFINE_TRACE() it must use the define_trace.h
method instead.
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
include/linux/tracepoint.h | 114 ++++++++++++++++++++++--------------------
include/trace/define_trace.h | 5 ++
include/trace/events/napi.h | 10 +++-
3 files changed, 72 insertions(+), 57 deletions(-)
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 78b4bd3..1d85f9a 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -33,6 +33,65 @@ struct tracepoint {
* Keep in sync with vmlinux.lds.h.
*/
+/*
+ * Connect a probe to a tracepoint.
+ * Internal API, should not be used directly.
+ */
+extern int tracepoint_probe_register(const char *name, void *probe);
+
+/*
+ * Disconnect a probe from a tracepoint.
+ * Internal API, should not be used directly.
+ */
+extern int tracepoint_probe_unregister(const char *name, void *probe);
+
+extern int tracepoint_probe_register_noupdate(const char *name, void *probe);
+extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe);
+extern void tracepoint_probe_update_all(void);
+
+struct tracepoint_iter {
+ struct module *module;
+ struct tracepoint *tracepoint;
+};
+
+extern void tracepoint_iter_start(struct tracepoint_iter *iter);
+extern void tracepoint_iter_next(struct tracepoint_iter *iter);
+extern void tracepoint_iter_stop(struct tracepoint_iter *iter);
+extern void tracepoint_iter_reset(struct tracepoint_iter *iter);
+extern int tracepoint_get_iter_range(struct tracepoint **tracepoint,
+ struct tracepoint *begin, struct tracepoint *end);
+
+/*
+ * tracepoint_synchronize_unregister must be called between the last tracepoint
+ * probe unregistration and the end of module exit to make sure there is no
+ * caller executing a probe when it is freed.
+ */
+static inline void tracepoint_synchronize_unregister(void)
+{
+ synchronize_sched();
+}
+
+#define PARAMS(args...) args
+
+#ifdef CONFIG_TRACEPOINTS
+extern void tracepoint_update_probe_range(struct tracepoint *begin,
+ struct tracepoint *end);
+#else
+static inline void tracepoint_update_probe_range(struct tracepoint *begin,
+ struct tracepoint *end)
+{ }
+#endif /* CONFIG_TRACEPOINTS */
+
+#endif /* _LINUX_TRACEPOINT_H */
+
+/*
+ * Note: we keep the TRACE_EVENT and DECLARE_TRACE outside the include
+ * file ifdef protection.
+ * This is due to the way trace events work. If a file includes two
+ * trace event headers under one "CREATE_TRACE_POINTS" the first include
+ * will override the TRACE_EVENT and break the second include.
+ */
+
#ifndef DECLARE_TRACE
#define TP_PROTO(args...) args
@@ -96,9 +155,6 @@ struct tracepoint {
#define EXPORT_TRACEPOINT_SYMBOL(name) \
EXPORT_SYMBOL(__tracepoint_##name)
-extern void tracepoint_update_probe_range(struct tracepoint *begin,
- struct tracepoint *end);
-
#else /* !CONFIG_TRACEPOINTS */
#define DECLARE_TRACE(name, proto, args) \
static inline void _do_trace_##name(struct tracepoint *tp, proto) \
@@ -119,61 +175,9 @@ extern void tracepoint_update_probe_range(struct tracepoint *begin,
#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)
#define EXPORT_TRACEPOINT_SYMBOL(name)
-static inline void tracepoint_update_probe_range(struct tracepoint *begin,
- struct tracepoint *end)
-{ }
#endif /* CONFIG_TRACEPOINTS */
#endif /* DECLARE_TRACE */
-/*
- * Connect a probe to a tracepoint.
- * Internal API, should not be used directly.
- */
-extern int tracepoint_probe_register(const char *name, void *probe);
-
-/*
- * Disconnect a probe from a tracepoint.
- * Internal API, should not be used directly.
- */
-extern int tracepoint_probe_unregister(const char *name, void *probe);
-
-extern int tracepoint_probe_register_noupdate(const char *name, void *probe);
-extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe);
-extern void tracepoint_probe_update_all(void);
-
-struct tracepoint_iter {
- struct module *module;
- struct tracepoint *tracepoint;
-};
-
-extern void tracepoint_iter_start(struct tracepoint_iter *iter);
-extern void tracepoint_iter_next(struct tracepoint_iter *iter);
-extern void tracepoint_iter_stop(struct tracepoint_iter *iter);
-extern void tracepoint_iter_reset(struct tracepoint_iter *iter);
-extern int tracepoint_get_iter_range(struct tracepoint **tracepoint,
- struct tracepoint *begin, struct tracepoint *end);
-
-/*
- * tracepoint_synchronize_unregister must be called between the last tracepoint
- * probe unregistration and the end of module exit to make sure there is no
- * caller executing a probe when it is freed.
- */
-static inline void tracepoint_synchronize_unregister(void)
-{
- synchronize_sched();
-}
-
-#define PARAMS(args...) args
-
-#endif /* _LINUX_TRACEPOINT_H */
-
-/*
- * Note: we keep the TRACE_EVENT outside the include file ifdef protection.
- * This is due to the way trace events work. If a file includes two
- * trace event headers under one "CREATE_TRACE_POINTS" the first include
- * will override the TRACE_EVENT and break the second include.
- */
-
#ifndef TRACE_EVENT
/*
* For use with the TRACE_EVENT macro:
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index 5acfb1e..1dfab54 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -65,6 +65,10 @@
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+/* Make all open coded DECLARE_TRACE nops */
+#undef DECLARE_TRACE
+#define DECLARE_TRACE(name, proto, args)
+
#ifdef CONFIG_EVENT_TRACING
#include <trace/ftrace.h>
#endif
@@ -75,6 +79,7 @@
#undef DEFINE_EVENT
#undef DEFINE_EVENT_PRINT
#undef TRACE_HEADER_MULTI_READ
+#undef DECLARE_TRACE
/* Only undef what we defined in this file */
#ifdef UNDEF_TRACE_INCLUDE_FILE
diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h
index a8989c4..188deca 100644
--- a/include/trace/events/napi.h
+++ b/include/trace/events/napi.h
@@ -1,4 +1,7 @@
-#ifndef _TRACE_NAPI_H_
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM napi
+
+#if !defined(_TRACE_NAPI_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_NAPI_H_
#include <linux/netdevice.h>
@@ -8,4 +11,7 @@ DECLARE_TRACE(napi_poll,
TP_PROTO(struct napi_struct *napi),
TP_ARGS(napi));
-#endif
+#endif /* _TRACE_NAPI_H_ */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--
1.7.0
next prev parent reply other threads:[~2010-05-06 23:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-06 23:04 [PATCH 0/3] [GIT PULL] tracing: various fixes Steven Rostedt
2010-05-06 23:05 ` [PATCH 1/3] tracing: Make the documentation clear on trace_event boot option Steven Rostedt
2010-05-06 23:05 ` Steven Rostedt [this message]
2010-05-06 23:05 ` [PATCH 3/3] tracing: Fix "integer as NULL pointer" warning Steven Rostedt
2010-05-07 6:34 ` [PATCH 0/3] [GIT PULL] tracing: various fixes Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100506230555.381153062@goodmis.org \
--to=rostedt@goodmis.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mingo@elte.hu \
--cc=nhorman@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox