linux-next: manual merge of the staging-next tree with the pcmcia tree

Stephen Rothwell
2010-05-17T05:49:22Z

drivers/staging/wlags49_h2/wl_cs.c between commit
eb14120f743d29744d9475bffec56ff4ad43a749 ("pcmcia: re-work
pcmcia_request_irq()") from the pcmcia tree and commit
93822ad193f1b1d92422dc3d539456acbe1a85ef ("Staging: wlags49_hs2: Fix
wlags49_hs2 driver after build fixes broke it") from the staging-next
tree.

I fixed it up (see below - basically the staging-next version) and can
carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au

diff --cc drivers/staging/wlags49_h2/wl_cs.c
index c9d99d8,568993f..0000000
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@@ -314,15 -310,22 +307,22 @@@ void wl_adapter_insert( struct pcmcia_d
/* Do we need to allocate an interrupt? */
link->conf.Attributes |= CONF_ENABLE_IRQ;

- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, wl_isr));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret != 0)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, (void *) wl_isr);
+ if (ret != 0)
+ goto failed;

+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret != 0)
+ goto failed;

- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;

- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk("%s: register_netdev() failed\n", MODULE_NAME);
goto failed;