* [GIT PULL for 2.6.35] i7core/nehalem EDAC driver
@ 2010-05-25 15:43 Mauro Carvalho Chehab
2010-06-01 21:12 ` Doug Thompson
0 siblings, 1 reply; 2+ messages in thread
From: Mauro Carvalho Chehab @ 2010-05-25 15:43 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, Linux Kernel Mailing List, Doug Thompson,
Bluesmoke ML, Linux Edac Mailing List
Hi Linus,
I'm re-sending the pull request, as the previous branch were wrong.
Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core.git linux_next
The following changes since commit 66f41d4c5c8a5deed66fdcc84509376c9a0bf9d8:
Linus Torvalds (1):
Linux 2.6.34-rc6
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core.git linux_next
Alan Cox (1):
edac: i7core_edac produces undefined behaviour on 32bit
Alexander Beregalov (1):
i7core_edac: fix memory leak of i7core_dev
Aristeu Rozanski (1):
pci: Add a probing code that seeks for an specific bus
Jiri Slaby (1):
EDAC: add __init to i7core_xeon_pci_fixup
Keith Mannthey (2):
i7core_edac: Fix ecc enable shift
i7core_edac: Probe on Xeons eariler
Mauro Carvalho Chehab (72):
i7core_edac: Add an EDAC memory controller driver for Nehalem chipsets
i7core_edac: Add error insertion code for Nehalem
i7core_edac: Add more status functions to EDAC driver
i7core_edac: Registers all supported MC functions
i7core_edac: Show read/write virtual/physical channel association
i7core_edac: A few fixes at error injection code
i7core_edac: need mci->edac_check, otherwise module removal doesn't work
i7core_edac: Add a memory check routine, based on device 3 function 4
i7core_edac: Add additional tests for error detection
i7core_edac: Properly fill struct csrow_info
i7core_edac: Improve error handling
i7core_edac: Add more information about each active dimm
i7core_edac: Get more info about the memory DIMMs
i7core_edac: Memory info fixes and preparation for properly filling cswrow data
i7core_edac: fill csrows edac sysfs info
i7core_edac: CodingStyle fixes
edac_mce: Add an interface driver to report mce errors via edac
edac/Kconfig: edac_mce can't be module
i7core_edac: Add edac_mce glue
i7core_edac: Adds write unlock to MC registers
i7core_edac: Add a code to probe Xeon 55xx bus
i7core_edac: add support for more than one MC socket
i7core_edac: maps all sockets as if ther are one MC controller
i7core_edac: decode mcelog error and send it via edac interface
i7core_edac: some fixes at memory error parser
i7core: fix probing on Xeon55xx
i7core: check if the memory error is fatal or non-fatal
i7core: enrich error information based on memory transaction type
i7core: fix get_devices routine for Xeon55xx
i7core: better document i7core_get_active_channels()
i7core: add socket info at the debug msg
i7core: remove some uneeded noisy debug messages
i7core_edac: Some cleanups at displayed info
i7core_edac: some fixes at error injection code
i7core_edac: fix error codes for sysfs error injection interface
i7core_edac: fix error injection
Documentation/edac.txt: Add Nehalem specific EDAC characteristics
i7core_edac: CodingSyle fixes/cleanups
i7core_edac: Print an error message if pci register fails
i7core_edac: Use Device 3 function 2 to report errors with RDIMM's
i7core: Use registered memories per processor
i7core_edac: Improve corrected_error_counts output for RDIMM
i7core: temporary workaround to allow it to compile against 2.6.30
Dynamically allocate memory for PCI devices
i7core_edac: create one mc per socket/QPI
i7core_edac: sanity check: print a warning if a mcelog is ignored
i7core_edac: a few fixes for multiple mc's
Documentation/edac.txt: Improve it to reflect the latest changes at the driver
i7core_edac: Fix a bug when printing error counts with RDIMMs
i7core_edac: at remove, don't remove all pci devices at once
i7core_edac: remove static counter for max sockets
i7core_edac: change remove module strategy
i7core_edac: We need to use list_for_each_entry_safe to avoid errors
i7core_edac: Avoid printing a warning when debug is disabled
edac_core: Allow the creation of sysfs groups
i7core_edac: Add support for sysfs addrmatch group
edac: store/show methods for device groups weren't working
edac: Don't create csrow entries on instance groups
i7core_edac: Convert UDIMM error counters into a proper sysfs group
Documentation/edac.txt: Reflect the sysfs changes at the document
edac: Create an unique instance for each kobj
i7core_edac: Use a lockless ringbuffer
i7core_edac: Better parse "any" addrmask
i7core_edac: First store, then increment
i7core_edac: Fix ringbuffer maxsize
i7core_edac: PCI device is called NONCORE, instead of NOCORE
i7core_edac: Use a more generic approach for probing PCI devices
i7core_edac: Add initial support for Lynnfield
i7core: add support for Lynnfield alternate address
i7core_edac: Fix wrong device id for channel 1 devices
i7core_edac: Add support for X5670
i7core_edac: Better describe the supported devices
Randy Dunlap (1):
edac: fix i7core build
Stephen Rothwell (1):
i7core_edac: do not export static functions
Tony Luck (1):
i7core_edac: don't free on success
Vernon Mauery (2):
Always call i7core_[ur]dimm_check_mc_ecc_err
Add support for Westmere to i7core_edac driver
Documentation/edac.txt | 152 +++
arch/x86/include/asm/pci_x86.h | 2 +
arch/x86/kernel/cpu/mcheck/mce.c | 10 +
arch/x86/pci/legacy.c | 42 +-
drivers/edac/Kconfig | 13 +
drivers/edac/Makefile | 2 +
drivers/edac/edac_core.h | 23 +-
drivers/edac/edac_mc_sysfs.c | 175 +++-
drivers/edac/edac_mce.c | 61 ++
drivers/edac/i7core_edac.c | 2078 ++++++++++++++++++++++++++++++++++++++
include/linux/edac_mce.h | 31 +
include/linux/pci.h | 1 +
include/linux/pci_ids.h | 52 +
13 files changed, 2598 insertions(+), 44 deletions(-)
create mode 100644 drivers/edac/edac_mce.c
create mode 100644 drivers/edac/i7core_edac.c
create mode 100644 include/linux/edac_mce.h
--
Cheers,
Mauro
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL for 2.6.35] i7core/nehalem EDAC driver
2010-05-25 15:43 [GIT PULL for 2.6.35] i7core/nehalem EDAC driver Mauro Carvalho Chehab
@ 2010-06-01 21:12 ` Doug Thompson
0 siblings, 0 replies; 2+ messages in thread
From: Doug Thompson @ 2010-06-01 21:12 UTC (permalink / raw)
To: Linus Torvalds, Mauro Carvalho Chehab
Cc: Andrew Morton, Linux Kernel Mailing List, Doug Thompson,
Bluesmoke ML, Linux Edac Mailing List
acked-by: doug thompson <dougthompson@xmission.com>
--- On Tue, 5/25/10, Mauro Carvalho Chehab <mchehab@redhat.com> wrote:
> From: Mauro Carvalho Chehab <mchehab@redhat.com>
> Subject: [GIT PULL for 2.6.35] i7core/nehalem EDAC driver
> To: "Linus Torvalds" <torvalds@linux-foundation.org>
> Cc: "Andrew Morton" <akpm@linux-foundation.org>, "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>, "Doug Thompson" <dougthompson@xmission.com>, "Bluesmoke ML" <bluesmoke-devel@lists.sourceforge.net>, "Linux Edac Mailing List" <linux-edac@vger.kernel.org>
> Date: Tuesday, May 25, 2010, 9:43 AM
> Hi Linus,
>
> I'm re-sending the pull request, as the previous branch
> were wrong.
>
> Please pull from:
>
> ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core.git
> linux_next
>
>
> The following changes since commit
> 66f41d4c5c8a5deed66fdcc84509376c9a0bf9d8:
> Linus Torvalds (1):
> Linux 2.6.34-rc6
>
> are available in the git repository at:
>
>
> ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core.git
> linux_next
>
> Alan Cox (1):
> edac: i7core_edac produces undefined
> behaviour on 32bit
>
> Alexander Beregalov (1):
> i7core_edac: fix memory leak of
> i7core_dev
>
> Aristeu Rozanski (1):
> pci: Add a probing code that seeks for
> an specific bus
>
> Jiri Slaby (1):
> EDAC: add __init to
> i7core_xeon_pci_fixup
>
> Keith Mannthey (2):
> i7core_edac: Fix ecc enable shift
> i7core_edac: Probe on Xeons eariler
>
> Mauro Carvalho Chehab (72):
> i7core_edac: Add an EDAC memory
> controller driver for Nehalem chipsets
> i7core_edac: Add error insertion code
> for Nehalem
> i7core_edac: Add more status functions
> to EDAC driver
> i7core_edac: Registers all supported
> MC functions
> i7core_edac: Show read/write
> virtual/physical channel association
> i7core_edac: A few fixes at error
> injection code
> i7core_edac: need mci->edac_check,
> otherwise module removal doesn't work
> i7core_edac: Add a memory check
> routine, based on device 3 function 4
> i7core_edac: Add additional tests for
> error detection
> i7core_edac: Properly fill struct
> csrow_info
> i7core_edac: Improve error handling
> i7core_edac: Add more information
> about each active dimm
> i7core_edac: Get more info about the
> memory DIMMs
> i7core_edac: Memory info fixes and
> preparation for properly filling cswrow data
> i7core_edac: fill csrows edac sysfs
> info
> i7core_edac: CodingStyle fixes
> edac_mce: Add an interface driver to
> report mce errors via edac
> edac/Kconfig: edac_mce can't be
> module
> i7core_edac: Add edac_mce glue
> i7core_edac: Adds write unlock to MC
> registers
> i7core_edac: Add a code to probe Xeon
> 55xx bus
> i7core_edac: add support for more than
> one MC socket
> i7core_edac: maps all sockets as if
> ther are one MC controller
> i7core_edac: decode mcelog error and
> send it via edac interface
> i7core_edac: some fixes at memory
> error parser
> i7core: fix probing on Xeon55xx
> i7core: check if the memory error is
> fatal or non-fatal
> i7core: enrich error information based
> on memory transaction type
> i7core: fix get_devices routine for
> Xeon55xx
> i7core: better document
> i7core_get_active_channels()
> i7core: add socket info at the debug
> msg
> i7core: remove some uneeded noisy
> debug messages
> i7core_edac: Some cleanups at
> displayed info
> i7core_edac: some fixes at error
> injection code
> i7core_edac: fix error codes for sysfs
> error injection interface
> i7core_edac: fix error injection
> Documentation/edac.txt: Add Nehalem
> specific EDAC characteristics
> i7core_edac: CodingSyle
> fixes/cleanups
> i7core_edac: Print an error message if
> pci register fails
> i7core_edac: Use Device 3 function 2
> to report errors with RDIMM's
> i7core: Use registered memories per
> processor
> i7core_edac: Improve
> corrected_error_counts output for RDIMM
> i7core: temporary workaround to allow
> it to compile against 2.6.30
> Dynamically allocate memory for PCI
> devices
> i7core_edac: create one mc per
> socket/QPI
> i7core_edac: sanity check: print a
> warning if a mcelog is ignored
> i7core_edac: a few fixes for multiple
> mc's
> Documentation/edac.txt: Improve it to
> reflect the latest changes at the driver
> i7core_edac: Fix a bug when printing
> error counts with RDIMMs
> i7core_edac: at remove, don't remove
> all pci devices at once
> i7core_edac: remove static counter for
> max sockets
> i7core_edac: change remove module
> strategy
> i7core_edac: We need to use
> list_for_each_entry_safe to avoid errors
> i7core_edac: Avoid printing a warning
> when debug is disabled
> edac_core: Allow the creation of sysfs
> groups
> i7core_edac: Add support for sysfs
> addrmatch group
> edac: store/show methods for device
> groups weren't working
> edac: Don't create csrow entries on
> instance groups
> i7core_edac: Convert UDIMM error
> counters into a proper sysfs group
> Documentation/edac.txt: Reflect the
> sysfs changes at the document
> edac: Create an unique instance for
> each kobj
> i7core_edac: Use a lockless
> ringbuffer
> i7core_edac: Better parse "any"
> addrmask
> i7core_edac: First store, then
> increment
> i7core_edac: Fix ringbuffer maxsize
> i7core_edac: PCI device is called
> NONCORE, instead of NOCORE
> i7core_edac: Use a more generic
> approach for probing PCI devices
> i7core_edac: Add initial support for
> Lynnfield
> i7core: add support for Lynnfield
> alternate address
> i7core_edac: Fix wrong device id for
> channel 1 devices
> i7core_edac: Add support for X5670
> i7core_edac: Better describe the
> supported devices
>
> Randy Dunlap (1):
> edac: fix i7core build
>
> Stephen Rothwell (1):
> i7core_edac: do not export static
> functions
>
> Tony Luck (1):
> i7core_edac: don't free on success
>
> Vernon Mauery (2):
> Always call
> i7core_[ur]dimm_check_mc_ecc_err
> Add support for Westmere to
> i7core_edac driver
>
> Documentation/edac.txt
> | 152 +++
> arch/x86/include/asm/pci_x86.h |
> 2 +
> arch/x86/kernel/cpu/mcheck/mce.c | 10 +
> arch/x86/pci/legacy.c
> | 42 +-
> drivers/edac/Kconfig
> | 13 +
> drivers/edac/Makefile
> | 2 +
> drivers/edac/edac_core.h
> | 23 +-
> drivers/edac/edac_mc_sysfs.c
> | 175 +++-
> drivers/edac/edac_mce.c
> | 61 ++
> drivers/edac/i7core_edac.c
> | 2078
> ++++++++++++++++++++++++++++++++++++++
> include/linux/edac_mce.h
> | 31 +
> include/linux/pci.h
> | 1 +
> include/linux/pci_ids.h
> | 52 +
> 13 files changed, 2598 insertions(+), 44 deletions(-)
> create mode 100644 drivers/edac/edac_mce.c
> create mode 100644 drivers/edac/i7core_edac.c
> create mode 100644 include/linux/edac_mce.h
>
>
>
> --
>
> Cheers,
> Mauro
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-06-01 21:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-25 15:43 [GIT PULL for 2.6.35] i7core/nehalem EDAC driver Mauro Carvalho Chehab
2010-06-01 21:12 ` Doug Thompson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox