linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleg Nesterov <oleg@redhat.com>
To: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Richard Henderson <rth@twiddle.net>,
	wezhang@redhat.com, linux-kernel@vger.kernel.org
Subject: Re: Q: sys_personality() && misc oddities
Date: Wed, 26 May 2010 14:36:22 +0200	[thread overview]
Message-ID: <20100526123622.GA26033@redhat.com> (raw)
In-Reply-To: <20100525193348.83F1549A54@magilla.sf.frob.com>

On 05/25, Roland McGrath wrote:
>
> I don't think we're ever going to need or want a 64-bit personality word.
> (There are still 10 bits unused in the middle for more flags.)

OK,

> Though the high bit might be set on 32-bit, there still should not really
> be a danger of misinterpreting a value as an error code--as long as we
> haven't used up all 10 of those middle bits.  The test userland (glibc)
> uses is not "long < 0" but "u_long > -4095UL".  So as long as at least
> one bit in 0xff00 remains clear, it won't match.

Yes, libc itself is fine. But from the application's pov, personality()
returns int, not long.

> For 64-bit you want to avoid sign-extension of the old value just so it
> looks valid (even though it won't look like an error code).  I think the
> most sensible thing is to change the task_struct field to 'unsigned int'.

it is already 'unsigned int' ;)

> I think the 0xffffffff check is intended specifically for personality(-1)
> to be a no-op that returns the old value, and nothing more.

I think the same.

> OTOH, this:
>
> 		set_personality(personality);
> 		if (current->personality != personality)
> 			return -EINVAL;
>
> will then both do the job in set_personality() and return -EINVAL, when
> some high bits are set.

Yes! and despite the fact it returns -EINVAL, current->personality was
changed. This can't be right.

> So, perhaps you are right about checking high
> bits.  Then I'd make it:
>
> 	if ((int) personality != -1) {
> 		if (unlikely((unsigned int) personality != personality))
> 			return -EINVAL;

Well. Think about personality(0xffffffff - 1). It passes both checks
and we change current->personality. Then the application calls
personality() again, we return the old value, and since the user-space
expects "int" it gets -2.

How about

	if (personality != 0xffffffff) {
		if (personality >= 0x7fffffff)
			return -EINVAL;
		set_personality(personality);
	}

? Now that personality always fits into "insigned int" we don't need
to recheck current->personality == personality, and "< 0x7fffffff"
gurantees that "int old_personality = personality(whatever)" in user
space can be never misinterpeted as error.

As for the other oddities, they need the separate patches. Or we can
just leave this code alone ;)

Oleg.


  reply	other threads:[~2010-05-26 12:38 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 14:17 Q: sys_personality() && misc oddities Oleg Nesterov
2010-05-25 19:33 ` Roland McGrath
2010-05-26 12:36   ` Oleg Nesterov [this message]
2010-05-26 20:31     ` Roland McGrath
2010-05-26 20:35       ` H. Peter Anvin
2010-05-27 15:35       ` [PATCH 0/3] (Was: Q: sys_personality() && misc oddities) Oleg Nesterov
2010-05-27 15:35         ` [PATCH 1/3] sys_personality: validate personality before set_personality() Oleg Nesterov
2010-05-27 16:39           ` Linus Torvalds
2010-05-27 17:15             ` Oleg Nesterov
2010-05-27 17:51               ` Linus Torvalds
2010-05-27 18:13                 ` Oleg Nesterov
2010-05-27 18:18                 ` Andi Kleen
2010-05-28 19:11                 ` [PATCH 0/2] sys_personality fixes v2 Oleg Nesterov
2010-05-28 19:12                   ` [PATCH 1/2] change sys_personality() to accept "unsigned int" instead of u_long Oleg Nesterov
2010-05-28 19:12                   ` [PATCH 2/2] remove the bogus checks in sys_personality()->__set_personality() path Oleg Nesterov
2010-05-28 19:28                   ` [PATCH 0/2] sys_personality fixes v2 Linus Torvalds
2010-05-28 19:58                     ` H. Peter Anvin
2010-05-28 19:59                     ` Oleg Nesterov
2010-05-27 15:36         ` [PATCH 2/3] sys_personality: make sure (int)personality >= 0 Oleg Nesterov
2010-05-27 20:02           ` H. Peter Anvin
2010-05-28 19:03             ` Oleg Nesterov
2010-05-27 15:36         ` [PATCH 3/3] __set_personality: no need to check the old ->exec_domain Oleg Nesterov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100526123622.GA26033@redhat.com \
    --to=oleg@redhat.com \
    --cc=andi@firstfloor.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roland@redhat.com \
    --cc=rth@twiddle.net \
    --cc=torvalds@linux-foundation.org \
    --cc=wezhang@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).