From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754994Ab0FAH2P (ORCPT ); Tue, 1 Jun 2010 03:28:15 -0400 Received: from 74-93-104-97-Washington.hfc.comcastbusiness.net ([74.93.104.97]:57756 "EHLO sunset.davemloft.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753482Ab0FAH2O (ORCPT ); Tue, 1 Jun 2010 03:28:14 -0400 Date: Tue, 01 Jun 2010 00:28:23 -0700 (PDT) Message-Id: <20100601.002823.124079598.davem@davemloft.net> To: jie.yang@atheros.com Cc: Luis.Rodriguez@atheros.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH net-next]atl1c: Add AR8151 v2 support and change L0s/L1 routine From: David Miller In-Reply-To: <12752881361777-git-send-email-jie.yang@atheros.com> References: <12752881361777-git-send-email-jie.yang@atheros.com> X-Mailer: Mew version 6.3 on Emacs 23.1 / Mule 6.0 (HANACHIRUSATO) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Date: Mon, 31 May 2010 14:42:16 +0800 > From: Jie.Yang@atheros.com > > Add AR8151 v2.0 Gigabit 1000 support > Change jumbo frame size to 6K > Update L0s/L1 rountine > when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2 > set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others. > Update atl1c_suspend routine > just refactory the function, add atl1c_phy_power_saving routine, > when Wake On Lan enable, this func will be called to save power, > it will reautoneg PHY to 10/100M speed depend on the link > partners link capability. > Update atl1c_configure_des_ring > do not use l2c_b default SRAM configuration. > > Signed-off-by: Jie.Yang@atheros.com Applied, thank you.