* [PATCH] matrix_keypad: add support for clustered irq
@ 2010-05-26 13:57 Luotao Fu
2010-05-26 14:29 ` Eric Miao
2010-05-27 6:43 ` [PATCH V2] " Luotao Fu
0 siblings, 2 replies; 6+ messages in thread
From: Luotao Fu @ 2010-05-26 13:57 UTC (permalink / raw)
To: Dmitry Torokhov, Marek Vasut
Cc: Eric Miao, linux-kernel, linux-input, Luotao Fu
This one adds support of a combined irq source for the whole matrix keypad.
This can be useful all rows and columns of the keypad is e.g. connected to
a GPIO expander, which only has one interrupt line for all events on every
single GPIO.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
drivers/input/keyboard/matrix_keypad.c | 80 ++++++++++++++++++++++++++------
include/linux/input/matrix_keypad.h | 5 ++
2 files changed, 70 insertions(+), 15 deletions(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b443e08..260dcb0 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -87,8 +87,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- for (i = 0; i < pdata->num_row_gpios; i++)
- enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+ if (pdata->clustered_irq > 0)
+ enable_irq(pdata->clustered_irq);
+ else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+ }
}
static void disable_row_irqs(struct matrix_keypad *keypad)
@@ -96,8 +100,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- for (i = 0; i < pdata->num_row_gpios; i++)
- disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+ if (pdata->clustered_irq > 0)
+ disable_irq_nosync(pdata->clustered_irq);
+ else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+ }
}
/*
@@ -226,6 +234,17 @@ static int matrix_keypad_suspend(struct device *dev)
matrix_keypad_stop(keypad->input_dev);
if (device_may_wakeup(&pdev->dev)) {
+ if (pdata->clustered_irq > 0) {
+ unsigned int cirq = pdata->clustered_irq;
+
+ if (enable_irq_wake(cirq) == 0) {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ __set_bit(i, keypad->disabled_gpios);
+ }
+
+ goto out;
+ }
+
for (i = 0; i < pdata->num_row_gpios; i++) {
if (!test_bit(i, keypad->disabled_gpios)) {
unsigned int gpio = pdata->row_gpios[i];
@@ -235,7 +254,7 @@ static int matrix_keypad_suspend(struct device *dev)
}
}
}
-
+out:
return 0;
}
@@ -247,6 +266,17 @@ static int matrix_keypad_resume(struct device *dev)
int i;
if (device_may_wakeup(&pdev->dev)) {
+ if (pdata->clustered_irq > 0) {
+ unsigned int cirq = pdata->clustered_irq;
+
+ if (disable_irq_wake(cirq) == 0) {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ clear_bit(i, keypad->disabled_gpios);
+ }
+
+ goto out;
+ }
+
for (i = 0; i < pdata->num_row_gpios; i++) {
if (test_and_clear_bit(i, keypad->disabled_gpios)) {
unsigned int gpio = pdata->row_gpios[i];
@@ -256,6 +286,7 @@ static int matrix_keypad_resume(struct device *dev)
}
}
+out:
matrix_keypad_start(keypad->input_dev);
return 0;
@@ -296,17 +327,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
gpio_direction_input(pdata->row_gpios[i]);
}
- for (i = 0; i < pdata->num_row_gpios; i++) {
- err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ if (pdata->clustered_irq > 0) {
+ err = request_irq(pdata->clustered_irq,
matrix_keypad_interrupt,
- IRQF_DISABLED |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ pdata->clustered_irq_flags,
"matrix-keypad", keypad);
if (err) {
dev_err(&pdev->dev,
- "Unable to acquire interrupt for GPIO line %i\n",
- pdata->row_gpios[i]);
- goto err_free_irqs;
+ "Unable to acquire clustered interrupt\n");
+ goto err_free_rows;
+ }
+ } else {
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ matrix_keypad_interrupt,
+ IRQF_DISABLED |
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "matrix-keypad", keypad);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to acquire interrupt "
+ "for GPIO line %i\n",
+ pdata->row_gpios[i]);
+ goto err_free_irqs;
+ }
}
}
@@ -418,11 +463,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
- for (i = 0; i < pdata->num_row_gpios; i++) {
- free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
- gpio_free(pdata->row_gpios[i]);
+ if (pdata->clustered_irq > 0) {
+ free_irq(pdata->clustered_irq, keypad);
+ } else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
}
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ gpio_free(pdata->row_gpios[i]);
+
for (i = 0; i < pdata->num_col_gpios; i++)
gpio_free(pdata->col_gpios[i]);
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index c964cd7..8e8dc2e 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {
/* key debounce interval in milli-second */
unsigned int debounce_ms;
+ /* used if interrupts of all row/column GPIOs are bundled to one single
+ * irq */
+ unsigned int clustered_irq;
+ unsigned int clustered_irq_flags;
+
bool active_low;
bool wakeup;
bool no_autorepeat;
--
1.7.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] matrix_keypad: add support for clustered irq
2010-05-26 13:57 [PATCH] matrix_keypad: add support for clustered irq Luotao Fu
@ 2010-05-26 14:29 ` Eric Miao
2010-05-26 14:38 ` Luotao Fu
2010-05-27 6:43 ` [PATCH V2] " Luotao Fu
1 sibling, 1 reply; 6+ messages in thread
From: Eric Miao @ 2010-05-26 14:29 UTC (permalink / raw)
To: Luotao Fu; +Cc: Dmitry Torokhov, Marek Vasut, linux-kernel, linux-input
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 8586 bytes --]
On Wed, May 26, 2010 at 9:57 PM, Luotao Fu <l.fu@pengutronix.de> wrote:> This one adds support of a combined irq source for the whole matrix keypad.> This can be useful all rows and columns of the keypad is e.g. connected to> a GPIO expander, which only has one interrupt line for all events on every> single GPIO.>> Signed-off-by: Luotao Fu <l.fu@pengutronix.de>> --->  drivers/input/keyboard/matrix_keypad.c |  80 ++++++++++++++++++++++++++------>  include/linux/input/matrix_keypad.h   |   5 ++>  2 files changed, 70 insertions(+), 15 deletions(-)>> diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c> index b443e08..260dcb0 100644> --- a/drivers/input/keyboard/matrix_keypad.c> +++ b/drivers/input/keyboard/matrix_keypad.c> @@ -87,8 +87,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;>     int i;>> -    for (i = 0; i < pdata->num_row_gpios; i++)> -        enable_irq(gpio_to_irq(pdata->row_gpios[i]));> +    if (pdata->clustered_irq > 0)> +        enable_irq(pdata->clustered_irq);> +    else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            enable_irq(gpio_to_irq(pdata->row_gpios[i]));> +    }>  }>>  static void disable_row_irqs(struct matrix_keypad *keypad)> @@ -96,8 +100,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;>     int i;>> -    for (i = 0; i < pdata->num_row_gpios; i++)> -        disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));> +    if (pdata->clustered_irq > 0)> +        disable_irq_nosync(pdata->clustered_irq);> +    else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));> +    }>  }>>  /*> @@ -226,6 +234,17 @@ static int matrix_keypad_suspend(struct device *dev)>     matrix_keypad_stop(keypad->input_dev);>>     if (device_may_wakeup(&pdev->dev)) {> +        if (pdata->clustered_irq > 0) {> +            unsigned int cirq = pdata->clustered_irq;> +> +            if (enable_irq_wake(cirq) == 0) {> +                for (i = 0; i < pdata->num_row_gpios; i++)> +                    __set_bit(i, keypad->disabled_gpios);> +            }> +> +            goto out;> +        }> +
This might deserve a separate function, and what is the usage of disabled_gpios,I seem to find nowhere (except in the resume routine).
> Â Â Â Â Â Â Â Â for (i = 0; i < pdata->num_row_gpios; i++) {> Â Â Â Â Â Â Â Â Â Â Â Â if (!test_bit(i, keypad->disabled_gpios)) {> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â unsigned int gpio = pdata->row_gpios[i];> @@ -235,7 +254,7 @@ static int matrix_keypad_suspend(struct device *dev)> Â Â Â Â Â Â Â Â Â Â Â Â }> Â Â Â Â Â Â Â Â }> Â Â Â Â }> -> +out:> Â Â Â Â return 0;> Â }>> @@ -247,6 +266,17 @@ static int matrix_keypad_resume(struct device *dev)> Â Â Â Â int i;>> Â Â Â Â if (device_may_wakeup(&pdev->dev)) {> + Â Â Â Â Â Â Â if (pdata->clustered_irq > 0) {> + Â Â Â Â Â Â Â Â Â Â Â unsigned int cirq = pdata->clustered_irq;> +> + Â Â Â Â Â Â Â Â Â Â Â if (disable_irq_wake(cirq) == 0) {> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â for (i = 0; i < pdata->num_row_gpios; i++)> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â clear_bit(i, keypad->disabled_gpios);> + Â Â Â Â Â Â Â Â Â Â Â }> +> + Â Â Â Â Â Â Â Â Â Â Â goto out;> + Â Â Â Â Â Â Â }> +
Better a separate routine.
> Â Â Â Â Â Â Â Â for (i = 0; i < pdata->num_row_gpios; i++) {> Â Â Â Â Â Â Â Â Â Â Â Â if (test_and_clear_bit(i, keypad->disabled_gpios)) {> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â unsigned int gpio = pdata->row_gpios[i];> @@ -256,6 +286,7 @@ static int matrix_keypad_resume(struct device *dev)> Â Â Â Â Â Â Â Â }> Â Â Â Â }>> +out:> Â Â Â Â matrix_keypad_start(keypad->input_dev);>> Â Â Â Â return 0;> @@ -296,17 +327,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,> Â Â Â Â Â Â Â Â gpio_direction_input(pdata->row_gpios[i]);> Â Â Â Â }>> - Â Â Â for (i = 0; i < pdata->num_row_gpios; i++) {> - Â Â Â Â Â Â Â err = request_irq(gpio_to_irq(pdata->row_gpios[i]),> + Â Â Â if (pdata->clustered_irq > 0) {> + Â Â Â Â Â Â Â err = request_irq(pdata->clustered_irq,> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â matrix_keypad_interrupt,> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IRQF_DISABLED |> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pdata->clustered_irq_flags,> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "matrix-keypad", keypad);> Â Â Â Â Â Â Â Â if (err) {> Â Â Â Â Â Â Â Â Â Â Â Â dev_err(&pdev->dev,> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Unable to acquire interrupt for GPIO line %i\n",> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pdata->row_gpios[i]);> - Â Â Â Â Â Â Â Â Â Â Â goto err_free_irqs;> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Unable to acquire clustered interrupt\n");> + Â Â Â Â Â Â Â Â Â Â Â goto err_free_rows;> + Â Â Â Â Â Â Â }> + Â Â Â } else {> + Â Â Â Â Â Â Â for (i = 0; i < pdata->num_row_gpios; i++) {> + Â Â Â Â Â Â Â Â Â Â Â err = request_irq(gpio_to_irq(pdata->row_gpios[i]),> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â matrix_keypad_interrupt,> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IRQF_DISABLED |> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IRQF_TRIGGER_RISING |> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IRQF_TRIGGER_FALLING,> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "matrix-keypad", keypad);> + Â Â Â Â Â Â Â Â Â Â Â if (err) {> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_err(&pdev->dev,> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Unable to acquire interrupt "> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "for GPIO line %i\n",> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pdata->row_gpios[i]);> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â goto err_free_irqs;> + Â Â Â Â Â Â Â Â Â Â Â }
Ditto.
>         }>     }>> @@ -418,11 +463,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)>>     device_init_wakeup(&pdev->dev, 0);>> -    for (i = 0; i < pdata->num_row_gpios; i++) {> -        free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);> -        gpio_free(pdata->row_gpios[i]);> +    if (pdata->clustered_irq > 0) {> +        free_irq(pdata->clustered_irq, keypad);> +    } else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);>     }>> +    for (i = 0; i < pdata->num_row_gpios; i++)> +        gpio_free(pdata->row_gpios[i]);> +>     for (i = 0; i < pdata->num_col_gpios; i++)>         gpio_free(pdata->col_gpios[i]);>> diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h> index c964cd7..8e8dc2e 100644> --- a/include/linux/input/matrix_keypad.h> +++ b/include/linux/input/matrix_keypad.h> @@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {>     /* key debounce interval in milli-second */>     unsigned int   debounce_ms;>> +    /* used if interrupts of all row/column GPIOs are bundled to one single> +     * irq */> +    unsigned int   clustered_irq;> +    unsigned int   clustered_irq_flags;> +>     bool       active_low;>     bool       wakeup;>     bool       no_autorepeat;> --> 1.7.0>>
Otherwise looks OK to me.ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] matrix_keypad: add support for clustered irq
2010-05-26 14:29 ` Eric Miao
@ 2010-05-26 14:38 ` Luotao Fu
0 siblings, 0 replies; 6+ messages in thread
From: Luotao Fu @ 2010-05-26 14:38 UTC (permalink / raw)
To: Eric Miao
Cc: Luotao Fu, Dmitry Torokhov, Marek Vasut, linux-kernel,
linux-input
[-- Attachment #1: Type: text/plain, Size: 8918 bytes --]
Hi Eric,
thankf for the review.
On Wed, May 26, 2010 at 10:29:53PM +0800, Eric Miao wrote:
> On Wed, May 26, 2010 at 9:57 PM, Luotao Fu <l.fu@pengutronix.de> wrote:
> > This one adds support of a combined irq source for the whole matrix keypad.
> > This can be useful all rows and columns of the keypad is e.g. connected to
> > a GPIO expander, which only has one interrupt line for all events on every
> > single GPIO.
> >
> > Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
> > ---
> > drivers/input/keyboard/matrix_keypad.c | 80 ++++++++++++++++++++++++++------
> > include/linux/input/matrix_keypad.h | 5 ++
> > 2 files changed, 70 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
> > index b443e08..260dcb0 100644
> > --- a/drivers/input/keyboard/matrix_keypad.c
> > +++ b/drivers/input/keyboard/matrix_keypad.c
> > @@ -87,8 +87,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
> > const struct matrix_keypad_platform_data *pdata = keypad->pdata;
> > int i;
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++)
> > - enable_irq(gpio_to_irq(pdata->row_gpios[i]));
> > + if (pdata->clustered_irq > 0)
> > + enable_irq(pdata->clustered_irq);
> > + else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + enable_irq(gpio_to_irq(pdata->row_gpios[i]));
> > + }
> > }
> >
> > static void disable_row_irqs(struct matrix_keypad *keypad)
> > @@ -96,8 +100,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
> > const struct matrix_keypad_platform_data *pdata = keypad->pdata;
> > int i;
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++)
> > - disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
> > + if (pdata->clustered_irq > 0)
> > + disable_irq_nosync(pdata->clustered_irq);
> > + else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
> > + }
> > }
> >
> > /*
> > @@ -226,6 +234,17 @@ static int matrix_keypad_suspend(struct device *dev)
> > matrix_keypad_stop(keypad->input_dev);
> >
> > if (device_may_wakeup(&pdev->dev)) {
> > + if (pdata->clustered_irq > 0) {
> > + unsigned int cirq = pdata->clustered_irq;
> > +
> > + if (enable_irq_wake(cirq) == 0) {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + __set_bit(i, keypad->disabled_gpios);
> > + }
> > +
> > + goto out;
> > + }
> > +
>
> This might deserve a separate function, and what is the usage of disabled_gpios,
> I seem to find nowhere (except in the resume routine).
indeed, will fix. The disable_gpios flag seems to be used to flag an
asleep/awake row/column. It's introduced by the original code. I think
that for the case with single irq I might better use another flag
instead since we have the situaiton "all or none" here and don't have to
mark every single lines.
>
> > for (i = 0; i < pdata->num_row_gpios; i++) {
> > if (!test_bit(i, keypad->disabled_gpios)) {
> > unsigned int gpio = pdata->row_gpios[i];
> > @@ -235,7 +254,7 @@ static int matrix_keypad_suspend(struct device *dev)
> > }
> > }
> > }
> > -
> > +out:
> > return 0;
> > }
> >
> > @@ -247,6 +266,17 @@ static int matrix_keypad_resume(struct device *dev)
> > int i;
> >
> > if (device_may_wakeup(&pdev->dev)) {
> > + if (pdata->clustered_irq > 0) {
> > + unsigned int cirq = pdata->clustered_irq;
> > +
> > + if (disable_irq_wake(cirq) == 0) {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + clear_bit(i, keypad->disabled_gpios);
> > + }
> > +
> > + goto out;
> > + }
> > +
>
> Better a separate routine.
>
> > for (i = 0; i < pdata->num_row_gpios; i++) {
> > if (test_and_clear_bit(i, keypad->disabled_gpios)) {
> > unsigned int gpio = pdata->row_gpios[i];
> > @@ -256,6 +286,7 @@ static int matrix_keypad_resume(struct device *dev)
> > }
> > }
> >
> > +out:
> > matrix_keypad_start(keypad->input_dev);
> >
> > return 0;
> > @@ -296,17 +327,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
> > gpio_direction_input(pdata->row_gpios[i]);
> > }
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++) {
> > - err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
> > + if (pdata->clustered_irq > 0) {
> > + err = request_irq(pdata->clustered_irq,
> > matrix_keypad_interrupt,
> > - IRQF_DISABLED |
> > - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> > + pdata->clustered_irq_flags,
> > "matrix-keypad", keypad);
> > if (err) {
> > dev_err(&pdev->dev,
> > - "Unable to acquire interrupt for GPIO line %i\n",
> > - pdata->row_gpios[i]);
> > - goto err_free_irqs;
> > + "Unable to acquire clustered interrupt\n");
> > + goto err_free_rows;
> > + }
> > + } else {
> > + for (i = 0; i < pdata->num_row_gpios; i++) {
> > + err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
> > + matrix_keypad_interrupt,
> > + IRQF_DISABLED |
> > + IRQF_TRIGGER_RISING |
> > + IRQF_TRIGGER_FALLING,
> > + "matrix-keypad", keypad);
> > + if (err) {
> > + dev_err(&pdev->dev,
> > + "Unable to acquire interrupt "
> > + "for GPIO line %i\n",
> > + pdata->row_gpios[i]);
> > + goto err_free_irqs;
> > + }
>
> Ditto.
>
> > }
> > }
> >
> > @@ -418,11 +463,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
> >
> > device_init_wakeup(&pdev->dev, 0);
> >
> > - for (i = 0; i < pdata->num_row_gpios; i++) {
> > - free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
> > - gpio_free(pdata->row_gpios[i]);
> > + if (pdata->clustered_irq > 0) {
> > + free_irq(pdata->clustered_irq, keypad);
> > + } else {
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
> > }
> >
> > + for (i = 0; i < pdata->num_row_gpios; i++)
> > + gpio_free(pdata->row_gpios[i]);
> > +
> > for (i = 0; i < pdata->num_col_gpios; i++)
> > gpio_free(pdata->col_gpios[i]);
> >
> > diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
> > index c964cd7..8e8dc2e 100644
> > --- a/include/linux/input/matrix_keypad.h
> > +++ b/include/linux/input/matrix_keypad.h
> > @@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {
> > /* key debounce interval in milli-second */
> > unsigned int debounce_ms;
> >
> > + /* used if interrupts of all row/column GPIOs are bundled to one single
> > + * irq */
> > + unsigned int clustered_irq;
> > + unsigned int clustered_irq_flags;
> > +
> > bool active_low;
> > bool wakeup;
> > bool no_autorepeat;
> > --
> > 1.7.0
> >
> >
>
> Otherwise looks OK to me.
Thanks
cheers
Luotao Fu
--
Pengutronix e.K. | Dipl.-Ing. Luotao Fu |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2] matrix_keypad: add support for clustered irq
2010-05-26 13:57 [PATCH] matrix_keypad: add support for clustered irq Luotao Fu
2010-05-26 14:29 ` Eric Miao
@ 2010-05-27 6:43 ` Luotao Fu
2010-05-27 15:14 ` Eric Miao
1 sibling, 1 reply; 6+ messages in thread
From: Luotao Fu @ 2010-05-27 6:43 UTC (permalink / raw)
To: Dmitry Torokhov, Marek Vasut
Cc: Eric Miao, linux-kernel, linux-input, Luotao Fu
This one adds support of a combined irq source for the whole matrix keypad.
This can be useful if all rows and columns of the keypad are e.g. connected
to a GPIO expander, which only has one interrupt line for all events on
every single GPIO.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
V2 Changes:
* create separate functions for suspend/resume calls.
* add bool flag to signal enable/disable state of all gpios.
* add spinlock to suspend and resume callbacks.
drivers/input/keyboard/matrix_keypad.c | 138 ++++++++++++++++++++++++--------
include/linux/input/matrix_keypad.h | 5 +
2 files changed, 109 insertions(+), 34 deletions(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b443e08..99b7204 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -37,6 +37,7 @@ struct matrix_keypad {
spinlock_t lock;
bool scan_pending;
bool stopped;
+ bool gpio_all_disabled;
};
/*
@@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- for (i = 0; i < pdata->num_row_gpios; i++)
- enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+ if (pdata->clustered_irq > 0)
+ enable_irq(pdata->clustered_irq);
+ else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+ }
}
static void disable_row_irqs(struct matrix_keypad *keypad)
@@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- for (i = 0; i < pdata->num_row_gpios; i++)
- disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+ if (pdata->clustered_irq > 0)
+ disable_irq_nosync(pdata->clustered_irq);
+ else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+ }
}
/*
@@ -216,25 +225,74 @@ static void matrix_keypad_stop(struct input_dev *dev)
}
#ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct device *dev)
+static inline void __suspend_keypad(struct matrix_keypad *keypad)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct matrix_keypad *keypad = platform_get_drvdata(pdev);
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ unsigned int cirq = pdata->clustered_irq;
+ unsigned int gpio;
+ unsigned long flags;
int i;
- matrix_keypad_stop(keypad->input_dev);
+ spin_lock_irqsave(&keypad->lock, flags);
- if (device_may_wakeup(&pdev->dev)) {
- for (i = 0; i < pdata->num_row_gpios; i++) {
- if (!test_bit(i, keypad->disabled_gpios)) {
- unsigned int gpio = pdata->row_gpios[i];
+ if (pdata->clustered_irq > 0) {
+ if (enable_irq_wake(cirq) == 0)
+ keypad->gpio_all_disabled = true;
- if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
- __set_bit(i, keypad->disabled_gpios);
- }
+ goto out;
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ if (!test_bit(i, keypad->disabled_gpios)) {
+ gpio = pdata->row_gpios[i];
+
+ if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
+ __set_bit(i, keypad->disabled_gpios);
+ }
+ }
+out:
+ spin_unlock_irqrestore(&keypad->lock, flags);
+}
+
+static inline void __resume_keypad(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ unsigned int cirq = pdata->clustered_irq;
+ unsigned int gpio;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&keypad->lock, flags);
+
+ if (pdata->clustered_irq > 0) {
+ if (keypad->gpio_all_disabled) {
+ disable_irq_wake(cirq);
+ keypad->gpio_all_disabled = false;
+ }
+
+ goto out;
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ if (test_and_clear_bit(i, keypad->disabled_gpios)) {
+ gpio = pdata->row_gpios[i];
+ disable_irq_wake(gpio_to_irq(gpio));
}
}
+out:
+ spin_unlock_irqrestore(&keypad->lock, flags);
+
+}
+
+static int matrix_keypad_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+ matrix_keypad_stop(keypad->input_dev);
+
+ if (device_may_wakeup(&pdev->dev))
+ __suspend_keypad(keypad);
return 0;
}
@@ -246,15 +304,8 @@ static int matrix_keypad_resume(struct device *dev)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
- if (device_may_wakeup(&pdev->dev)) {
- for (i = 0; i < pdata->num_row_gpios; i++) {
- if (test_and_clear_bit(i, keypad->disabled_gpios)) {
- unsigned int gpio = pdata->row_gpios[i];
-
- disable_irq_wake(gpio_to_irq(gpio));
- }
- }
- }
+ if (device_may_wakeup(&pdev->dev))
+ __resume_keypad(keypad);
matrix_keypad_start(keypad->input_dev);
@@ -296,17 +347,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
gpio_direction_input(pdata->row_gpios[i]);
}
- for (i = 0; i < pdata->num_row_gpios; i++) {
- err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ if (pdata->clustered_irq > 0) {
+ err = request_irq(pdata->clustered_irq,
matrix_keypad_interrupt,
- IRQF_DISABLED |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ pdata->clustered_irq_flags,
"matrix-keypad", keypad);
if (err) {
dev_err(&pdev->dev,
- "Unable to acquire interrupt for GPIO line %i\n",
- pdata->row_gpios[i]);
- goto err_free_irqs;
+ "Unable to acquire clustered interrupt\n");
+ goto err_free_rows;
+ }
+ } else {
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ matrix_keypad_interrupt,
+ IRQF_DISABLED |
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "matrix-keypad", keypad);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to acquire interrupt "
+ "for GPIO line %i\n",
+ pdata->row_gpios[i]);
+ goto err_free_irqs;
+ }
}
}
@@ -418,11 +483,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
- for (i = 0; i < pdata->num_row_gpios; i++) {
- free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
- gpio_free(pdata->row_gpios[i]);
+ if (pdata->clustered_irq > 0) {
+ free_irq(pdata->clustered_irq, keypad);
+ } else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
}
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ gpio_free(pdata->row_gpios[i]);
+
for (i = 0; i < pdata->num_col_gpios; i++)
gpio_free(pdata->col_gpios[i]);
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index c964cd7..8e8dc2e 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {
/* key debounce interval in milli-second */
unsigned int debounce_ms;
+ /* used if interrupts of all row/column GPIOs are bundled to one single
+ * irq */
+ unsigned int clustered_irq;
+ unsigned int clustered_irq_flags;
+
bool active_low;
bool wakeup;
bool no_autorepeat;
--
1.7.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V2] matrix_keypad: add support for clustered irq
2010-05-27 6:43 ` [PATCH V2] " Luotao Fu
@ 2010-05-27 15:14 ` Eric Miao
2010-06-10 19:32 ` Dmitry Torokhov
0 siblings, 1 reply; 6+ messages in thread
From: Eric Miao @ 2010-05-27 15:14 UTC (permalink / raw)
To: Luotao Fu; +Cc: Dmitry Torokhov, Marek Vasut, linux-kernel, linux-input
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 10694 bytes --]
On Thu, May 27, 2010 at 2:43 PM, Luotao Fu <l.fu@pengutronix.de> wrote:> This one adds support of a combined irq source for the whole matrix keypad.> This can be useful if all rows and columns of the keypad are e.g. connected> to a GPIO expander, which only has one interrupt line for all events on> every single GPIO.>> Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
I feel OK. Acked-by: Eric Miao <eric.y.miao@gmail.com>
> ---> V2 Changes:> * create separate functions for suspend/resume calls.> * add bool flag to signal enable/disable state of all gpios.> * add spinlock to suspend and resume callbacks.>>  drivers/input/keyboard/matrix_keypad.c |  138 ++++++++++++++++++++++++-------->  include/linux/input/matrix_keypad.h   |   5 +>  2 files changed, 109 insertions(+), 34 deletions(-)>> diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c> index b443e08..99b7204 100644> --- a/drivers/input/keyboard/matrix_keypad.c> +++ b/drivers/input/keyboard/matrix_keypad.c> @@ -37,6 +37,7 @@ struct matrix_keypad {>     spinlock_t lock;>     bool scan_pending;>     bool stopped;> +    bool gpio_all_disabled;>  };>>  /*> @@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;>     int i;>> -    for (i = 0; i < pdata->num_row_gpios; i++)> -        enable_irq(gpio_to_irq(pdata->row_gpios[i]));> +    if (pdata->clustered_irq > 0)> +        enable_irq(pdata->clustered_irq);> +    else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            enable_irq(gpio_to_irq(pdata->row_gpios[i]));> +    }>  }>>  static void disable_row_irqs(struct matrix_keypad *keypad)> @@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;>     int i;>> -    for (i = 0; i < pdata->num_row_gpios; i++)> -        disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));> +    if (pdata->clustered_irq > 0)> +        disable_irq_nosync(pdata->clustered_irq);> +    else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));> +    }>  }>>  /*> @@ -216,25 +225,74 @@ static void matrix_keypad_stop(struct input_dev *dev)>  }>>  #ifdef CONFIG_PM> -static int matrix_keypad_suspend(struct device *dev)> +static inline void __suspend_keypad(struct matrix_keypad *keypad)>  {> -    struct platform_device *pdev = to_platform_device(dev);> -    struct matrix_keypad *keypad = platform_get_drvdata(pdev);>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;> +    unsigned int cirq = pdata->clustered_irq;> +    unsigned int gpio;> +    unsigned long flags;>     int i;>> -    matrix_keypad_stop(keypad->input_dev);> +    spin_lock_irqsave(&keypad->lock, flags);>> -    if (device_may_wakeup(&pdev->dev)) {> -        for (i = 0; i < pdata->num_row_gpios; i++) {> -            if (!test_bit(i, keypad->disabled_gpios)) {> -                unsigned int gpio = pdata->row_gpios[i];> +    if (pdata->clustered_irq > 0) {> +        if (enable_irq_wake(cirq) == 0)> +            keypad->gpio_all_disabled = true;>> -                if (enable_irq_wake(gpio_to_irq(gpio)) == 0)> -                    __set_bit(i, keypad->disabled_gpios);> -            }> +        goto out;> +    }> +> +    for (i = 0; i < pdata->num_row_gpios; i++) {> +        if (!test_bit(i, keypad->disabled_gpios)) {> +            gpio = pdata->row_gpios[i];> +> +            if (enable_irq_wake(gpio_to_irq(gpio)) == 0)> +                __set_bit(i, keypad->disabled_gpios);> +        }> +    }> +out:> +    spin_unlock_irqrestore(&keypad->lock, flags);> +}> +> +static inline void __resume_keypad(struct matrix_keypad *keypad)> +{> +    const struct matrix_keypad_platform_data *pdata = keypad->pdata;> +    unsigned int cirq = pdata->clustered_irq;> +    unsigned int gpio;> +    unsigned long flags;> +    int i;> +> +    spin_lock_irqsave(&keypad->lock, flags);> +> +    if (pdata->clustered_irq > 0) {> +        if (keypad->gpio_all_disabled) {> +            disable_irq_wake(cirq);> +            keypad->gpio_all_disabled = false;> +        }> +> +        goto out;> +    }> +> +    for (i = 0; i < pdata->num_row_gpios; i++) {> +        if (test_and_clear_bit(i, keypad->disabled_gpios)) {> +            gpio = pdata->row_gpios[i];> +            disable_irq_wake(gpio_to_irq(gpio));>         }>     }> +out:> +    spin_unlock_irqrestore(&keypad->lock, flags);> +> +}> +> +static int matrix_keypad_suspend(struct device *dev)> +{> +    struct platform_device *pdev = to_platform_device(dev);> +    struct matrix_keypad *keypad = platform_get_drvdata(pdev);> +> +    matrix_keypad_stop(keypad->input_dev);> +> +    if (device_may_wakeup(&pdev->dev))> +        __suspend_keypad(keypad);>>     return 0;>  }> @@ -246,15 +304,8 @@ static int matrix_keypad_resume(struct device *dev)>     const struct matrix_keypad_platform_data *pdata = keypad->pdata;>     int i;>> -    if (device_may_wakeup(&pdev->dev)) {> -        for (i = 0; i < pdata->num_row_gpios; i++) {> -            if (test_and_clear_bit(i, keypad->disabled_gpios)) {> -                unsigned int gpio = pdata->row_gpios[i];> -> -                disable_irq_wake(gpio_to_irq(gpio));> -            }> -        }> -    }> +    if (device_may_wakeup(&pdev->dev))> +        __resume_keypad(keypad);>>     matrix_keypad_start(keypad->input_dev);>> @@ -296,17 +347,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,>         gpio_direction_input(pdata->row_gpios[i]);>     }>> -    for (i = 0; i < pdata->num_row_gpios; i++) {> -        err = request_irq(gpio_to_irq(pdata->row_gpios[i]),> +    if (pdata->clustered_irq > 0) {> +        err = request_irq(pdata->clustered_irq,>                 matrix_keypad_interrupt,> -                IRQF_DISABLED |> -                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,> +                pdata->clustered_irq_flags,>                 "matrix-keypad", keypad);>         if (err) {>             dev_err(&pdev->dev,> -                "Unable to acquire interrupt for GPIO line %i\n",> -                pdata->row_gpios[i]);> -            goto err_free_irqs;> +                "Unable to acquire clustered interrupt\n");> +            goto err_free_rows;> +        }> +    } else {> +        for (i = 0; i < pdata->num_row_gpios; i++) {> +            err = request_irq(gpio_to_irq(pdata->row_gpios[i]),> +                    matrix_keypad_interrupt,> +                    IRQF_DISABLED |> +                    IRQF_TRIGGER_RISING |> +                    IRQF_TRIGGER_FALLING,> +                    "matrix-keypad", keypad);> +            if (err) {> +                dev_err(&pdev->dev,> +                    "Unable to acquire interrupt "> +                    "for GPIO line %i\n",> +                    pdata->row_gpios[i]);> +                goto err_free_irqs;> +            }>         }>     }>> @@ -418,11 +483,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)>>     device_init_wakeup(&pdev->dev, 0);>> -    for (i = 0; i < pdata->num_row_gpios; i++) {> -        free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);> -        gpio_free(pdata->row_gpios[i]);> +    if (pdata->clustered_irq > 0) {> +        free_irq(pdata->clustered_irq, keypad);> +    } else {> +        for (i = 0; i < pdata->num_row_gpios; i++)> +            free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);>     }>> +    for (i = 0; i < pdata->num_row_gpios; i++)> +        gpio_free(pdata->row_gpios[i]);> +>     for (i = 0; i < pdata->num_col_gpios; i++)>         gpio_free(pdata->col_gpios[i]);>> diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h> index c964cd7..8e8dc2e 100644> --- a/include/linux/input/matrix_keypad.h> +++ b/include/linux/input/matrix_keypad.h> @@ -63,6 +63,11 @@ struct matrix_keypad_platform_data {>     /* key debounce interval in milli-second */>     unsigned int   debounce_ms;>> +    /* used if interrupts of all row/column GPIOs are bundled to one single> +     * irq */> +    unsigned int   clustered_irq;> +    unsigned int   clustered_irq_flags;> +>     bool       active_low;>     bool       wakeup;>     bool       no_autorepeat;> --> 1.7.0>>ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH V2] matrix_keypad: add support for clustered irq
2010-05-27 15:14 ` Eric Miao
@ 2010-06-10 19:32 ` Dmitry Torokhov
0 siblings, 0 replies; 6+ messages in thread
From: Dmitry Torokhov @ 2010-06-10 19:32 UTC (permalink / raw)
To: Eric Miao; +Cc: Luotao Fu, Marek Vasut, linux-kernel, linux-input
On Thursday, May 27, 2010 08:14:50 am Eric Miao wrote:
> On Thu, May 27, 2010 at 2:43 PM, Luotao Fu <l.fu@pengutronix.de> wrote:
> > This one adds support of a combined irq source for the whole matrix keypad.
> > This can be useful if all rows and columns of the keypad are e.g. connected
> > to a GPIO expander, which only has one interrupt line for all events on
> > every single GPIO.
> >
> > Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
>
> I feel OK. Acked-by: Eric Miao <eric.y.miao@gmail.com>
>
> > ---
> > V2 Changes:
> > * create separate functions for suspend/resume calls.
> > * add bool flag to signal enable/disable state of all gpios.
> > * add spinlock to suspend and resume callbacks.
The spinlock is not needed, it should be OK to get interrupted in the middle
of setting up wakeup sources. The enable/disable irq is different as if we
get interrupted in the middle of the process our counters will get messed
up.
Fixed a few compile warnings and applied for .36.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-06-15 3:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-26 13:57 [PATCH] matrix_keypad: add support for clustered irq Luotao Fu
2010-05-26 14:29 ` Eric Miao
2010-05-26 14:38 ` Luotao Fu
2010-05-27 6:43 ` [PATCH V2] " Luotao Fu
2010-05-27 15:14 ` Eric Miao
2010-06-10 19:32 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox