From: Ralf Baechle <ralf@linux-mips.org>
To: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
Date: Tue, 15 Jun 2010 18:34:32 +0100 [thread overview]
Message-ID: <20100615173432.GA27904@linux-mips.org> (raw)
In-Reply-To: <20100614155108.GA30552@oksana.dev.rtsoft.ru>
On Mon, Jun 14, 2010 at 07:51:08PM +0400, Anton Vorontsov wrote:
> On Wed, Jun 02, 2010 at 09:12:29PM +0200, Lars-Peter Clausen wrote:
> > This patch adds support for the battery voltage measurement part of the JZ4740
> > ADC unit.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > Cc: Anton Vorontsov <cbouatmailru@gmail.com>
> > ---
>
> Looks good. I see this is an RFC. Do you want me to apply it
> or there's a newer version to be submitted?
To allow for reasonable testing while this patchset is getting integrated
I suggest I apply all the patches that were acked by the respective
maintainers to the MIPS tree, feed them to -next for testing and once
that phase is complete send the whole thing to Linus.
Ralf
next prev parent reply other threads:[~2010-06-15 17:34 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-02 19:02 [RFC][PATCH 00/26] *** SUBJECT HERE *** Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-03 14:27 ` Florian Fainelli
2010-06-03 17:03 ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-06-03 14:29 ` Florian Fainelli
2010-06-02 19:02 ` [RFC][PATCH 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-02 22:45 ` Graham Gower
2010-06-03 17:20 ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-04 0:47 ` Ralf Baechle
2010-06-02 19:10 ` [RFC][PATCH 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-05 15:48 ` [rtc-linux] " Wan ZongShun
2010-06-05 17:26 ` Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-06-02 19:36 ` Andrew Morton
2010-06-02 20:05 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-06-13 9:40 ` Artem Bityutskiy
2010-06-02 19:12 ` [RFC][PATCH 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-03 5:45 ` [alsa-devel] " Wan ZongShun
2010-06-03 12:03 ` Mark Brown
2010-06-03 12:32 ` Liam Girdwood
2010-06-03 12:50 ` Liam Girdwood
2010-06-03 16:58 ` Lars-Peter Clausen
2010-06-03 17:49 ` Mark Brown
2010-06-03 23:57 ` Lars-Peter Clausen
2010-06-03 23:59 ` Mark Brown
2010-06-02 19:12 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-03 3:36 ` [alsa-devel] " Wan ZongShun
2010-06-03 12:48 ` Liam Girdwood
2010-06-03 16:50 ` Lars-Peter Clausen
2010-06-03 17:03 ` Liam Girdwood
2010-06-03 17:16 ` Lars-Peter Clausen
2010-06-03 17:25 ` Liam Girdwood
2010-06-03 17:37 ` Lars-Peter Clausen
2010-06-03 18:14 ` [alsa-devel] " Troy Kisky
2010-11-14 13:29 ` hi!!!! dkisky
2010-06-03 17:55 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Mark Brown
2010-06-03 19:27 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver Lars-Peter Clausen
2010-06-05 17:22 ` Jonathan Cameron
2010-06-05 19:08 ` Lars-Peter Clausen
2010-06-05 21:07 ` [lm-sensors] " Jonathan Cameron
2010-06-05 22:12 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 23/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-14 15:51 ` Anton Vorontsov
2010-06-15 17:28 ` Lars-Peter Clausen
2010-06-15 17:34 ` Ralf Baechle [this message]
2010-06-16 12:20 ` Mark Brown
2010-06-19 3:48 ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 24/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 25/26] MIPS: Add defconfig for the qi_lb60 board Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-03 17:57 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100615173432.GA27904@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=cbouatmailru@gmail.com \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).