From: "Ozan Çağlayan" <ozan@pardus.org.tr>
To: linux-kernel@vger.kernel.org
Cc: stern@rowland.harvard.edu, gregkh@suse.de, rjw@sisk.pl
Subject: Re: [BISECTED] Suspend regression in v2.6.31 with Lenovo 3000 v200
Date: Mon, 21 Jun 2010 13:31:07 +0300 [thread overview]
Message-ID: <201006211331.08010.ozan@pardus.org.tr> (raw)
In-Reply-To: <201006211022.37707.ozan@pardus.org.tr>
Pazartesi 21 Haziran 2010 günü (saat 10:22:37) Ozan Çağlayan şunları yazmıştı:
> Hi,
>
> First of all I know that 2.6.31 is not maintained anymore and I don't know
> if the problem still exists in kernels > 2.6.31 as I don't have any
> hardware to reproduce it.
And also here's some probably interesting warnings available on both machines' dmesg output:
[ 0.136578] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 0.136585] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c135b8), AE_NOT_FOUND
[ 0.136618] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.136732] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf40fffff]
[ 0.136741] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.136748] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.136798] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4100000-0xf41fffff]
[ 0.136932] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.137029] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.137129] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4704000-0xf47043ff]
[ 0.137218] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.137225] pci 0000:00:1a.7: PME# disabled
[ 0.137288] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff]
[ 0.137360] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.137365] pci 0000:00:1b.0: PME# disabled
[ 0.137464] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137470] pci 0000:00:1c.0: PME# disabled
[ 0.137574] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.137580] pci 0000:00:1c.1: PME# disabled
[ 0.137682] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.137687] pci 0000:00:1c.2: PME# disabled
[ 0.137764] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.137856] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.137948] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.138050] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4704400-0xf47047ff]
[ 1.238005] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 ****************
[ 1.238043] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.238050] pci 0000:00:1d.7: PME# disabled
[ 1.238243] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 1.238248] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 1.238256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
[ 1.238320] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 1.238330] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 1.238339] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 1.238348] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 1.238358] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 1.238424] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
[ 1.238434] pci 0000:00:1f.2: reg 14 io port: [0x18f4-0x18f7]
[ 1.238443] pci 0000:00:1f.2: reg 18 io port: [0x18f8-0x18ff]
[ 1.238453] pci 0000:00:1f.2: reg 1c io port: [0x18f0-0x18f3]
[ 1.238462] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
[ 1.238471] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
[ 1.238506] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.238512] pci 0000:00:1f.2: PME# disabled
[ 1.238544] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 1.238574] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 1.238676] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 1.238682] pci 0000:00:1c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 1.238692] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 1.238926] pci 0000:05:00.0: reg 10 64bit mmio: [0xf4200000-0xf420ffff]
[ 1.239180] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 1.239192] pci 0000:05:00.0: PME# disabled
[ 1.239719] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
[ 1.239827] pci 0000:06:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff]
[ 1.239954] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.239963] pci 0000:06:00.0: PME# disabled
[ 1.242155] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4300000-0xf43fffff]
[ 1.242240] pci 0000:0a:09.0: reg 10 32bit mmio: [0xf4400000-0xf44007ff]
[ 1.242324] pci 0000:0a:09.0: supports D1 D2
[ 1.242327] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.242333] pci 0000:0a:09.0: PME# disabled
[ 1.242391] pci 0000:0a:09.1: reg 10 32bit mmio: [0xf4400800-0xf44008ff]
[ 1.242474] pci 0000:0a:09.1: supports D1 D2
[ 1.242477] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.242484] pci 0000:0a:09.1: PME# disabled
[ 1.242542] pci 0000:0a:09.2: reg 10 32bit mmio: [0xf4400c00-0xf4400cff]
[ 1.242625] pci 0000:0a:09.2: supports D1 D2
[ 1.242628] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.242635] pci 0000:0a:09.2: PME# disabled
[ 1.242694] pci 0000:0a:09.3: reg 10 32bit mmio: [0xf4401000-0xf44010ff]
[ 1.242777] pci 0000:0a:09.3: supports D1 D2
[ 1.242780] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.242787] pci 0000:0a:09.3: PME# disabled
[ 1.242844] pci 0000:0a:09.4: reg 10 32bit mmio: [0xf4401400-0xf44014ff]
[ 1.242928] pci 0000:0a:09.4: supports D1 D2
[ 1.242930] pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.242937] pci 0000:0a:09.4: PME# disabled
[ 1.243009] pci 0000:00:1e.0: transparent bridge
[ 1.243018] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4400000-0xf44fffff]
[ 1.243057] pci_bus 0000:00: on NUMA node 0
[ 1.243063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.243329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.243415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.243501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.243622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.243724] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.243731] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c135b8), AE_NOT_FOUND
[ 1.256510] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.256630] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.256746] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.256861] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.256975] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.257097] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 1.257211] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 1.257324] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng
next prev parent reply other threads:[~2010-06-21 10:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-21 7:22 [BISECTED] Suspend regression in v2.6.31 with Lenovo 3000 v200 Ozan Çağlayan
2010-06-21 10:31 ` Ozan Çağlayan [this message]
2010-06-21 16:25 ` Alan Stern
2010-06-22 9:09 ` Ozan Çağlayan
2010-06-22 14:49 ` Alan Stern
2010-06-22 16:53 ` Ozan Çağlayan
2010-06-22 17:47 ` Alan Stern
2010-06-24 7:01 ` Ozan Çağlayan
2010-06-24 14:10 ` Alan Stern
2010-06-24 15:40 ` Ozan Çağlayan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201006211331.08010.ozan@pardus.org.tr \
--to=ozan@pardus.org.tr \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox