From: Samuel Ortiz <sameo@linux.intel.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] gpiolib: Implement set_debounce for WM831x GPIOs
Date: Mon, 5 Jul 2010 00:07:33 +0200 [thread overview]
Message-ID: <20100704220732.GA3443@sortiz-mobl> (raw)
In-Reply-To: <1278164456-15801-1-git-send-email-broonie@opensource.wolfsonmicro.com>
On Sat, Jul 03, 2010 at 03:40:56PM +0200, Mark Brown wrote:
> The debounce times are approximate, they can be selected using the two
> input functions.
Thanks Mark, patch applied.
Cheers,
Samuel.
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/gpio/wm831x-gpio.c | 32 ++++++++++++++++++++++++++++++++
> 1 files changed, 32 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
> index 1fa449a..309644c 100644
> --- a/drivers/gpio/wm831x-gpio.c
> +++ b/drivers/gpio/wm831x-gpio.c
> @@ -108,6 +108,37 @@ static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
> return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset;
> }
>
> +static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
> + unsigned debounce)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> + int reg = WM831X_GPIO1_CONTROL + offset;
> + int ret, fn;
> +
> + ret = wm831x_reg_read(wm831x, reg);
> + if (ret < 0)
> + return ret;
> +
> + switch (ret & WM831X_GPN_FN_MASK) {
> + case 0:
> + case 1:
> + break;
> + default:
> + /* Not in GPIO mode */
> + return -EBUSY;
> + }
> +
> + if (debounce >= 32 && debounce <= 64)
> + fn = 0;
> + else if (debounce >= 4000 && debounce <= 8000)
> + fn = 1;
> + else
> + return -EINVAL;
> +
> + return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn);
> +}
> +
> #ifdef CONFIG_DEBUG_FS
> static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> {
> @@ -208,6 +239,7 @@ static struct gpio_chip template_chip = {
> .direction_output = wm831x_gpio_direction_out,
> .set = wm831x_gpio_set,
> .to_irq = wm831x_gpio_to_irq,
> + .set_debounce = wm831x_gpio_set_debounce,
> .dbg_show = wm831x_gpio_dbg_show,
> .can_sleep = 1,
> };
> --
> 1.7.1
>
--
Intel Open Source Technology Centre
http://oss.intel.com/
prev parent reply other threads:[~2010-07-04 22:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-03 13:40 [PATCH] gpiolib: Implement set_debounce for WM831x GPIOs Mark Brown
2010-07-04 22:07 ` Samuel Ortiz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100704220732.GA3443@sortiz-mobl \
--to=sameo@linux.intel.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox