Re: Workaround hardware bug addressing physical memory

[Marin Mitov <mitov@issp.bas.bg>]

On 15.7.2010, Unai Uribarri wrote:
> Thanks.
> ----- "Marin Mitov" <mitov@issp.bas.bg> wrote:
> 
> | On Wednesday, July 14, 2010 08:06:49 pm you wrote:
> | > ----- "Marin Mitov" <mitov@issp.bas.bg> wrote:
> | > 
> | > | Hi,
> | > | 
> | > | This is pci driver. You can set dma mask:
> | > | 
> | > | dma_set_coheren_mask(pdev, DMA_BIT_MASK(31)) 
> | > | 
> | > | All further alloc_coherent() should be from the region 0-2GB.
> | > | 
> | > 
> | > But I'm using a 64 bit operating system with 32GB of RAM. It's a
> | > pity to be unable to use 4GB-32GB range because the 2-4GB range is
> | > unusable. So I've written this code to skip invalid areas. Do you
> | > think this code could be useful for other drivers?
> | 
> | Let me summarize if I have correctly understood what you do.
> | 
> | First, your hardware has problems when the physical (bus) address
> | is out of the 0-2GB region, so you cannot use buffers that are out 
> | of this range in any case. And the defect is in the peripheral, not in
> | the bridge between it and the memory.
> 
> The hardware works correctly for physical address in the ranges 0 to 2GB
> AND 4GB to 32GB. 

Sorry, I have missed that point.

> Physical address in the 2-4GB range are read correctly 
> by the device. But when the device tries to write to them it issues 
> invalid PCIe transaction headers: it tries to access such addresses using
> a 64-bit transactions when the PCI Express standard mandates to use 32-bit
> transactions for memory addresses below 4GB. Some bridges accept such
> invalid transactions, but Intel 5500 chipset rejects them.
> 
> I'm allocating 256MB of RAM for I/O buffers; I'm fear that restricting all
> the allocations to the first 2GB of memory will put too much pressure in
> that zone of memory. But restricting it to 4GB and above will be okay. 
> 
> Is there any way to restrict to memory address above 4GB?

I am thinking if your BIOS could make a memory holl between 2-4GB
remapping this memory above 4GB? On my (relatively old machine)
the memory hall is restricted to 512MB in the region (4GB-512MB) - 4GB.
AGP apertires could be up to 2GB (according to specs), or using kernel
parameters (if exist) to map the memory (excluding this 2-4GB region).

> 
> 
> | Second, you do allocations and check if dma_addr_t is in this range.
> | If it is, you keep it for use. If not, you put it in a list and
> | allocate a new one.
> | When you allocate sufficiently memory in 0-2GB region, you deallocate
> | 
> | the memory (kept in the list) that is out of the region. Right?
> | 
> 
> Yes, except that the validator function is:
> 
> static int validate_dma(void *ptr, struct device *dev, size_t size, dma_addr_t handle)
> {
>         return handle < 0x80000000U || handle > 0xFFFFFFFFU;
> }
> 
> Thanks.
>