From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Baruch Siach <baruch@tkos.co.il>,
"David S. Miller" <davem@davemloft.net>
Subject: [143/165] dm9000: fix "BUG: spinlock recursion"
Date: Fri, 30 Jul 2010 10:16:11 -0700 [thread overview]
Message-ID: <20100730171512.600292870@clark.site> (raw)
In-Reply-To: <20100730171550.GA1299@kroah.com
2.6.32-stable review patch. If anyone has any objections, please let us know.
------------------
From: Baruch Siach <baruch@tkos.co.il>
commit 380fefb2ddabd4cd5f14dbe090481f0544e65078 upstream.
dm9000_set_rx_csum and dm9000_hash_table are called from atomic context (in
dm9000_init_dm9000), and from non-atomic context (via ethtool_ops and
net_device_ops respectively). This causes a spinlock recursion BUG. Fix this by
renaming these functions to *_unlocked for the atomic context, and make the
original functions locking wrappers for use in the non-atomic context.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/net/dm9000.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -471,17 +471,13 @@ static uint32_t dm9000_get_rx_csum(struc
return dm->rx_csum;
}
-static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data)
+static int dm9000_set_rx_csum_unlocked(struct net_device *dev, uint32_t data)
{
board_info_t *dm = to_dm9000_board(dev);
- unsigned long flags;
if (dm->can_csum) {
dm->rx_csum = data;
-
- spin_lock_irqsave(&dm->lock, flags);
iow(dm, DM9000_RCSR, dm->rx_csum ? RCSR_CSUM : 0);
- spin_unlock_irqrestore(&dm->lock, flags);
return 0;
}
@@ -489,6 +485,19 @@ static int dm9000_set_rx_csum(struct net
return -EOPNOTSUPP;
}
+static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ ret = dm9000_set_rx_csum_unlocked(dev, data);
+ spin_unlock_irqrestore(&dm->lock, flags);
+
+ return ret;
+}
+
static int dm9000_set_tx_csum(struct net_device *dev, uint32_t data)
{
board_info_t *dm = to_dm9000_board(dev);
@@ -667,7 +676,7 @@ static unsigned char dm9000_type_to_char
* Set DM9000 multicast address
*/
static void
-dm9000_hash_table(struct net_device *dev)
+dm9000_hash_table_unlocked(struct net_device *dev)
{
board_info_t *db = netdev_priv(dev);
struct dev_mc_list *mcptr = dev->mc_list;
@@ -676,12 +685,9 @@ dm9000_hash_table(struct net_device *dev
u32 hash_val;
u16 hash_table[4];
u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
- unsigned long flags;
dm9000_dbg(db, 1, "entering %s\n", __func__);
- spin_lock_irqsave(&db->lock, flags);
-
for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
iow(db, oft, dev->dev_addr[i]);
@@ -711,6 +717,16 @@ dm9000_hash_table(struct net_device *dev
}
iow(db, DM9000_RCR, rcr);
+}
+
+static void
+dm9000_hash_table(struct net_device *dev)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&db->lock, flags);
+ dm9000_hash_table_unlocked(dev);
spin_unlock_irqrestore(&db->lock, flags);
}
@@ -729,7 +745,7 @@ dm9000_init_dm9000(struct net_device *de
db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
/* Checksum mode */
- dm9000_set_rx_csum(dev, db->rx_csum);
+ dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
/* GPIO0 on pre-activate PHY */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
@@ -749,7 +765,7 @@ dm9000_init_dm9000(struct net_device *de
iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */
/* Set address filter table */
- dm9000_hash_table(dev);
+ dm9000_hash_table_unlocked(dev);
imr = IMR_PAR | IMR_PTM | IMR_PRM;
if (db->type != TYPE_DM9000E)
reply other threads:[~2010-07-30 17:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100730171512.600292870@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=baruch@tkos.co.il \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox