From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760075Ab0G3R47 (ORCPT ); Fri, 30 Jul 2010 13:56:59 -0400 Received: from kroah.org ([198.145.64.141]:58628 "EHLO coco.kroah.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932357Ab0G3R4L (ORCPT ); Fri, 30 Jul 2010 13:56:11 -0400 X-Mailbox-Line: From gregkh@clark.site Fri Jul 30 10:51:42 2010 Message-Id: <20100730175142.608509724@clark.site> User-Agent: quilt/0.48-11.2 Date: Fri, 30 Jul 2010 10:51:55 -0700 From: Greg KH To: linux-kernel@vger.kernel.org, stable@kernel.org Cc: stable-review@kernel.org, torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Tejun Heo , Peer Chen , Jeff Garzik Subject: [098/205] ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1 In-Reply-To: <20100730175238.GA3924@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 2.6.34-stable review patch. If anyone has any objections, please let us know. ------------------ From: Tejun Heo commit 1529c69adce1e95f7ae72f0441590c226bbac7fc upstream. IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo Cc: Peer Chen Reported-by: Anders Østhus Reported-by: Andreas Graf Reported-by: Benoit Gschwind Reported-by: Damien Cassou Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman --- drivers/ata/ata_generic.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -32,6 +32,11 @@ * A generic parallel ATA driver using libata */ +enum { + ATA_GEN_CLASS_MATCH = (1 << 0), + ATA_GEN_FORCE_DMA = (1 << 1), +}; + /** * generic_set_mode - mode setting * @link: link to set up @@ -46,13 +51,17 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) { struct ata_port *ap = link->ap; + const struct pci_device_id *id = ap->host->private_data; int dma_enabled = 0; struct ata_device *dev; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - /* Bits 5 and 6 indicate if DMA is active on master/slave */ - if (ap->ioaddr.bmdma_addr) + if (id->driver_data & ATA_GEN_FORCE_DMA) { + dma_enabled = 0xff; + } else if (ap->ioaddr.bmdma_addr) { + /* Bits 5 and 6 indicate if DMA is active on master/slave */ dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + } if (pdev->vendor == PCI_VENDOR_ID_CENATEK) dma_enabled = 0xFF; @@ -126,7 +135,7 @@ static int ata_generic_init_one(struct p const struct ata_port_info *ppi[] = { &info, NULL }; /* Don't use the generic entry unless instructed to do so */ - if (id->driver_data == 1 && all_generic_ide == 0) + if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) return -ENODEV; /* Devices that need care */ @@ -155,7 +164,7 @@ static int ata_generic_init_one(struct p return rc; pcim_pin_device(dev); } - return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0); + return ata_pci_sff_init_one(dev, ppi, &generic_sht, (void *)id, 0); } static struct pci_device_id ata_generic[] = { @@ -167,13 +176,15 @@ static struct pci_device_id ata_generic[ { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, - { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), + .driver_data = ATA_GEN_FORCE_DMA }, /* * For some reason, MCP89 on MacBook 7,1 doesn't work with * ahci, use ata_generic instead. */ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA, - PCI_VENDOR_ID_APPLE, 0xcb89, }, + PCI_VENDOR_ID_APPLE, 0xcb89, + .driver_data = ATA_GEN_FORCE_DMA }, #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE) { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, @@ -181,7 +192,8 @@ static struct pci_device_id ata_generic[ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, #endif /* Must come last. If you add entries adjust this table appropriately */ - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), + .driver_data = ATA_GEN_CLASS_MATCH }, { 0, }, };