From: Marcin Slusarz <marcin.slusarz@gmail.com>
To: x86@kernel.org
Cc: LKML <linux-kernel@vger.kernel.org>, Pekka Paalanen <pq@iki.fi>,
nouveau@lists.freedesktop.org
Subject: [PATCH] x86,mmiotrace: add support for tracing STOS instruction
Date: Sat, 31 Jul 2010 22:51:01 +0200 [thread overview]
Message-ID: <20100731205101.GA5860@joi.lan> (raw)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Pekka Paalanen <pq@iki.fi>
---
arch/x86/mm/pf_in.c | 30 +++++++++++++++++-------------
1 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
index 308e325..38e6d17 100644
--- a/arch/x86/mm/pf_in.c
+++ b/arch/x86/mm/pf_in.c
@@ -40,16 +40,16 @@ static unsigned char prefix_codes[] = {
static unsigned int reg_rop[] = {
0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
};
-static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB };
static unsigned int imm_wop[] = { 0xC6, 0xC7 };
/* IA32 Manual 3, 3-432*/
-static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 };
+static unsigned int rw8[] = { 0x88, 0x8A, 0xC6, 0xAA };
static unsigned int rw32[] = {
- 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+ 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB
};
-static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F };
+static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F, 0xAA };
static unsigned int mw16[] = { 0xB70F, 0xBF0F };
-static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 };
+static unsigned int mw32[] = { 0x89, 0x8B, 0xC7, 0xAB };
static unsigned int mw64[] = {};
#else /* not __i386__ */
static unsigned char prefix_codes[] = {
@@ -63,20 +63,20 @@ static unsigned char prefix_codes[] = {
static unsigned int reg_rop[] = {
0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
};
-static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB };
static unsigned int imm_wop[] = { 0xC6, 0xC7 };
-static unsigned int rw8[] = { 0xC6, 0x88, 0x8A };
+static unsigned int rw8[] = { 0xC6, 0x88, 0x8A, 0xAA };
static unsigned int rw32[] = {
- 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+ 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB
};
/* 8 bit only */
-static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F };
+static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F, 0xAA };
/* 16 bit only */
static unsigned int mw16[] = { 0xB70F, 0xBF0F };
/* 16 or 32 bit */
static unsigned int mw32[] = { 0xC7 };
/* 16, 32 or 64 bit */
-static unsigned int mw64[] = { 0x89, 0x8B };
+static unsigned int mw64[] = { 0x89, 0x8B, 0xAB };
#endif /* not __i386__ */
struct prefix_bits {
@@ -410,7 +410,6 @@ static unsigned long *get_reg_w32(int no, struct pt_regs *regs)
unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
{
unsigned int opcode;
- unsigned char mod_rm;
int reg;
unsigned char *p;
struct prefix_bits prf;
@@ -437,8 +436,13 @@ unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
goto err;
do_work:
- mod_rm = *p;
- reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3);
+ /* for STOS, source register is fixed */
+ if (opcode == 0xAA || opcode == 0xAB) {
+ reg = arg_AX;
+ } else {
+ unsigned char mod_rm = *p;
+ reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3);
+ }
switch (get_ins_reg_width(ins_addr)) {
case 1:
return *get_reg_w8(reg, prf.rex, regs);
--
1.7.1.1
next reply other threads:[~2010-07-31 20:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-31 20:51 Marcin Slusarz [this message]
2010-08-01 8:23 ` [PATCH] x86,mmiotrace: add support for tracing STOS instruction Pekka Paalanen
2010-08-01 23:08 ` Frederic Weisbecker
2010-08-02 7:58 ` [tip:perf/core] x86,mmiotrace: Add " tip-bot for Marcin Slusarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100731205101.GA5860@joi.lan \
--to=marcin.slusarz@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
--cc=pq@iki.fi \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox