From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756124Ab0HCLlH (ORCPT ); Tue, 3 Aug 2010 07:41:07 -0400 Received: from toccata.ens-lyon.fr ([140.77.166.68]:59930 "EHLO toccata.ens-lyon.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755936Ab0HCLlF (ORCPT ); Tue, 3 Aug 2010 07:41:05 -0400 Date: Tue, 3 Aug 2010 13:40:59 +0200 From: =?iso-8859-1?Q?Sh=E9rab?= To: Daniel J Blueman Cc: Takashi Iwai , Linux Kernel Subject: Re: PC Beeps not working with HDA Intel module Message-ID: <20100803114058.GA3074@pema> References: <20100802181449.GA3071@pema> <20100803081743.GA6566@pema> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi again Daniel & all, > Ok, this patch works for me; I've modified it with the ground-truth we > have (thus there are likely other codecs to fix up later). Shérab, can > you test from your end? Yeah it works perfectly, thanks ! One other question: the PC Beep controller in Alsa can take only four values: 0%, 33%, 66% and 100%. What I find strange is that even when it's at 0%, there is a beep, whose volume seems a bit strong to me. It becomes stronger and stronger with the other values, which is normal, but 0% seems to be non-equivalent to muting the control, I'm wondering whether this is normal. I'm also a bit disapointed that this control can take only those values, for I'd appreciate to have an even softer beep, between the current 0% and nothing at all. Any insight would be very appreciated. Best wishes, Shérab, so happy to have recovered his beloved console bell.