From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Juergen Beisert <j.beisert@pengutronix.de>,
Daniel Mack <daniel@caiaq.de>, Baruch Siach <baruch@tkos.co.il>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [06/36] arm/imx/gpio: add spinlock protection
Date: Fri, 06 Aug 2010 12:19:47 -0700 [thread overview]
Message-ID: <20100806192114.950626346@clark.site> (raw)
In-Reply-To: <20100806192649.GA1614@kroah.com>
2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Baruch Siach <baruch@tkos.co.il>
commit 14cb0deb66fcfca8fdbef75da8c84b5405a8c767 upstream.
The GPIO registers need protection from concurrent access for operations that
are not atomic.
Cc: Juergen Beisert <j.beisert@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>
Reported-by: rpkamiak@rockwellcollins.com
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/arm/plat-mxc/gpio.c | 8 ++++++++
arch/arm/plat-mxc/include/mach/gpio.h | 1 +
2 files changed, 9 insertions(+)
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -215,13 +215,16 @@ static void _set_gpio_direction(struct g
struct mxc_gpio_port *port =
container_of(chip, struct mxc_gpio_port, chip);
u32 l;
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
l = __raw_readl(port->base + GPIO_GDIR);
if (dir)
l |= 1 << offset;
else
l &= ~(1 << offset);
__raw_writel(l, port->base + GPIO_GDIR);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -230,9 +233,12 @@ static void mxc_gpio_set(struct gpio_chi
container_of(chip, struct mxc_gpio_port, chip);
void __iomem *reg = port->base + GPIO_DR;
u32 l;
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
__raw_writel(l, reg);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -286,6 +292,8 @@ int __init mxc_gpio_init(struct mxc_gpio
port[i].chip.base = i * 32;
port[i].chip.ngpio = 32;
+ spin_lock_init(&port[i].lock);
+
/* its a serious configuration bug when it fails */
BUG_ON( gpiochip_add(&port[i].chip) < 0 );
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -36,6 +36,7 @@ struct mxc_gpio_port {
int virtual_irq_start;
struct gpio_chip chip;
u32 both_edges;
+ spinlock_t lock;
};
int mxc_gpio_init(struct mxc_gpio_port*, int);
next prev parent reply other threads:[~2010-08-06 19:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-06 19:26 [00/36] 2.6.34.3-stable review Greg KH
2010-08-06 19:19 ` [01/36] mm: fix ia64 crash when gcore reads gate area Greg KH
2010-08-06 19:19 ` [02/36] NFS: kswapd must not block in nfs_release_page Greg KH
2010-08-06 19:19 ` [03/36] NFS: Fix a typo in include/linux/nfs_fs.h Greg KH
2010-08-06 19:19 ` [04/36] comedi: Uncripple 8255-based DIO subdevices Greg KH
2010-08-06 19:19 ` [05/36] PARISC: led.c - fix potential stack overflow in led_proc_write() Greg KH
2010-08-06 19:19 ` Greg KH [this message]
2010-08-06 19:19 ` [07/36] parisc: pass through \t to early (iodc) console Greg KH
2010-08-06 19:19 ` [08/36] amd64_edac: Fix DCT base address selector Greg KH
2010-08-06 19:19 ` [09/36] amd64_edac: Correct scrub rate setting Greg KH
2010-08-06 19:19 ` [10/36] amd64_edac: Fix operator precendence error Greg KH
2010-08-06 19:19 ` [11/36] e1000e: dont inadvertently re-set INTX_DISABLE Greg KH
2010-08-06 19:19 ` [12/36] e1000e: 82577/82578 PHY register access issues Greg KH
2010-08-06 19:19 ` [13/36] 9p: strlen() doesnt count the terminator Greg KH
2010-08-06 19:19 ` [14/36] igb: Use only a single Tx queue in SR-IOV mode Greg KH
2010-08-06 19:19 ` [15/36] ath9k: enable serialize_regmode for non-PCIE AR9160 Greg KH
2010-08-06 19:19 ` [16/36] ath9k: fix a potential buffer leak in the STA teardown path Greg KH
2010-08-06 19:19 ` [17/36] ath9k_hw: fix an off-by-one error in the PDADC boundaries calculation Greg KH
2010-08-06 19:19 ` [18/36] ath9k: fix TSF after reset on AR913x Greg KH
2010-08-06 19:20 ` [19/36] ath9k: fix yet another buffer leak in the tx aggregation code Greg KH
2010-08-06 19:20 ` [20/36] iwlwifi: fix scan abort Greg KH
2010-08-06 19:20 ` [21/36] cfg80211: ignore spurious deauth Greg KH
2010-08-06 19:20 ` [22/36] cfg80211: dont get expired BSSes Greg KH
2010-08-06 19:20 ` [23/36] mac80211: avoid scheduling while atomic in mesh_rx_plink_frame Greg KH
2010-08-06 19:20 ` [24/36] SCSI: enclosure: fix error path - actually return ERR_PTR() on error Greg KH
2010-08-06 19:20 ` [25/36] GFS2: rename causes kernel Oops Greg KH
2010-08-06 19:20 ` [26/36] KVM: MMU: flush remote tlbs when overwriting spte with different pfn Greg KH
2010-08-06 19:20 ` [27/36] xen: drop xen_sched_clock in favour of using plain wallclock time Greg KH
2010-08-06 19:20 ` [28/36] drm/radeon/kms/igp: sideport is AMD only Greg KH
2010-08-06 19:20 ` [29/36] drm/radeon: add new pci ids Greg KH
2010-08-06 19:20 ` [30/36] drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush Greg KH
2010-08-06 19:20 ` [31/36] drm/i915: Check overlay stride errata for i830 and i845 Greg KH
2010-08-06 19:20 ` [32/36] Revert "ssb: Handle Netbook devices where the SPROM address is changed" Greg KH
2010-08-06 19:20 ` [33/36] ssb: do not read SPROM if it does not exist Greg KH
2010-08-06 19:20 ` [34/36] ssb: Look for SPROM at different offset on higher rev CC Greg KH
2010-08-06 19:20 ` [35/36] ssb: fix NULL ptr deref when pcihost_wrapper is used Greg KH
2010-08-06 19:20 ` [36/36] ssb: Handle alternate SSPROM location Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100806192114.950626346@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=baruch@tkos.co.il \
--cc=daniel@caiaq.de \
--cc=j.beisert@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox