From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Stanislaw Gruszka <sgruszka@redhat.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [20/36] iwlwifi: fix scan abort
Date: Fri, 06 Aug 2010 12:20:01 -0700 [thread overview]
Message-ID: <20100806192116.186301418@clark.site> (raw)
In-Reply-To: <20100806192649.GA1614@kroah.com>
2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Stanislaw Gruszka <sgruszka@redhat.com>
commit d28232b461b8d54b09e59325dbac8b0913ce2049 upstream.
Fix possible double priv->mutex lock introduced by commit
a69b03e941abae00380fc6bc1877fb797a1b31e6
"iwlwifi: cancel scan watchdog in iwl_bg_abort_scan" .
We can not call cancel_delayed_work_sync(&priv->scan_check) with
priv->mutex locked because workqueue function iwl_bg_scan_check()
take that lock internally.
We do not need to synchronize when canceling priv->scan_check work.
We can avoid races (sending double abort command or send no
command at all) using STATUS_SCAN_ABORT bit. Moreover
current iwl_bg_scan_check() code seems to be broken, as
we should not send abort commands when currently aborting.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/net/wireless/iwlwifi/iwl-scan.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -607,11 +607,10 @@ void iwl_bg_scan_check(struct work_struc
return;
mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) ||
- test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_SCAN(priv, "Scan completion watchdog resetting "
- "adapter (%dms)\n",
- jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+ if (test_bit(STATUS_SCANNING, &priv->status) &&
+ !test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan completion watchdog (%dms)\n",
+ jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
iwl_send_scan_abort(priv);
@@ -950,12 +949,11 @@ void iwl_bg_abort_scan(struct work_struc
!test_bit(STATUS_GEO_CONFIGURED, &priv->status))
return;
- mutex_lock(&priv->mutex);
-
- cancel_delayed_work_sync(&priv->scan_check);
- set_bit(STATUS_SCAN_ABORTING, &priv->status);
- iwl_send_scan_abort(priv);
+ cancel_delayed_work(&priv->scan_check);
+ mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status))
+ iwl_send_scan_abort(priv);
mutex_unlock(&priv->mutex);
}
EXPORT_SYMBOL(iwl_bg_abort_scan);
next prev parent reply other threads:[~2010-08-06 19:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-06 19:26 [00/36] 2.6.34.3-stable review Greg KH
2010-08-06 19:19 ` [01/36] mm: fix ia64 crash when gcore reads gate area Greg KH
2010-08-06 19:19 ` [02/36] NFS: kswapd must not block in nfs_release_page Greg KH
2010-08-06 19:19 ` [03/36] NFS: Fix a typo in include/linux/nfs_fs.h Greg KH
2010-08-06 19:19 ` [04/36] comedi: Uncripple 8255-based DIO subdevices Greg KH
2010-08-06 19:19 ` [05/36] PARISC: led.c - fix potential stack overflow in led_proc_write() Greg KH
2010-08-06 19:19 ` [06/36] arm/imx/gpio: add spinlock protection Greg KH
2010-08-06 19:19 ` [07/36] parisc: pass through \t to early (iodc) console Greg KH
2010-08-06 19:19 ` [08/36] amd64_edac: Fix DCT base address selector Greg KH
2010-08-06 19:19 ` [09/36] amd64_edac: Correct scrub rate setting Greg KH
2010-08-06 19:19 ` [10/36] amd64_edac: Fix operator precendence error Greg KH
2010-08-06 19:19 ` [11/36] e1000e: dont inadvertently re-set INTX_DISABLE Greg KH
2010-08-06 19:19 ` [12/36] e1000e: 82577/82578 PHY register access issues Greg KH
2010-08-06 19:19 ` [13/36] 9p: strlen() doesnt count the terminator Greg KH
2010-08-06 19:19 ` [14/36] igb: Use only a single Tx queue in SR-IOV mode Greg KH
2010-08-06 19:19 ` [15/36] ath9k: enable serialize_regmode for non-PCIE AR9160 Greg KH
2010-08-06 19:19 ` [16/36] ath9k: fix a potential buffer leak in the STA teardown path Greg KH
2010-08-06 19:19 ` [17/36] ath9k_hw: fix an off-by-one error in the PDADC boundaries calculation Greg KH
2010-08-06 19:19 ` [18/36] ath9k: fix TSF after reset on AR913x Greg KH
2010-08-06 19:20 ` [19/36] ath9k: fix yet another buffer leak in the tx aggregation code Greg KH
2010-08-06 19:20 ` Greg KH [this message]
2010-08-06 19:20 ` [21/36] cfg80211: ignore spurious deauth Greg KH
2010-08-06 19:20 ` [22/36] cfg80211: dont get expired BSSes Greg KH
2010-08-06 19:20 ` [23/36] mac80211: avoid scheduling while atomic in mesh_rx_plink_frame Greg KH
2010-08-06 19:20 ` [24/36] SCSI: enclosure: fix error path - actually return ERR_PTR() on error Greg KH
2010-08-06 19:20 ` [25/36] GFS2: rename causes kernel Oops Greg KH
2010-08-06 19:20 ` [26/36] KVM: MMU: flush remote tlbs when overwriting spte with different pfn Greg KH
2010-08-06 19:20 ` [27/36] xen: drop xen_sched_clock in favour of using plain wallclock time Greg KH
2010-08-06 19:20 ` [28/36] drm/radeon/kms/igp: sideport is AMD only Greg KH
2010-08-06 19:20 ` [29/36] drm/radeon: add new pci ids Greg KH
2010-08-06 19:20 ` [30/36] drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush Greg KH
2010-08-06 19:20 ` [31/36] drm/i915: Check overlay stride errata for i830 and i845 Greg KH
2010-08-06 19:20 ` [32/36] Revert "ssb: Handle Netbook devices where the SPROM address is changed" Greg KH
2010-08-06 19:20 ` [33/36] ssb: do not read SPROM if it does not exist Greg KH
2010-08-06 19:20 ` [34/36] ssb: Look for SPROM at different offset on higher rev CC Greg KH
2010-08-06 19:20 ` [35/36] ssb: fix NULL ptr deref when pcihost_wrapper is used Greg KH
2010-08-06 19:20 ` [36/36] ssb: Handle alternate SSPROM location Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100806192116.186301418@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=sgruszka@redhat.com \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox