From: Marek Vasut <marek.vasut@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, sameo@linux.intel.com, dtor@mail.ru,
adobriyan@gmail.com, tj@kernel.org
Subject: Re: [PATCH] UCB1400: Pass ucb1400-gpio data through ac97 bus
Date: Mon, 9 Aug 2010 06:43:14 +0200 [thread overview]
Message-ID: <201008090643.14777.marek.vasut@gmail.com> (raw)
In-Reply-To: <1281327394-6716-1-git-send-email-marek.vasut@gmail.com>
Dne Po 9. srpna 2010 06:16:34 Marek Vasut napsal(a):
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> drivers/gpio/ucb1400_gpio.c | 19 ++++++-------------
> drivers/mfd/ucb1400_core.c | 5 +++++
> include/linux/ucb1400.h | 19 ++++++-------------
> 3 files changed, 17 insertions(+), 26 deletions(-)
Ah right, guys, if possible, let this go through Eric Miao's tree (as I have
changes that depend on this). Thanks!
Cheers
>
> diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/ucb1400_gpio.c
> index 50e6bd1..fba45a5 100644
> --- a/drivers/gpio/ucb1400_gpio.c
> +++ b/drivers/gpio/ucb1400_gpio.c
> @@ -12,8 +12,6 @@
> #include <linux/module.h>
> #include <linux/ucb1400.h>
>
> -struct ucb1400_gpio_data *ucbdata;
> -
> static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
> {
> struct ucb1400_gpio *gpio;
> @@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device
> *dev) struct ucb1400_gpio *ucb = dev->dev.platform_data;
> int err = 0;
>
> - if (!(ucbdata && ucbdata->gpio_offset)) {
> + if (!(ucb && ucb->gpio_offset)) {
> err = -EINVAL;
> goto err;
> }
> @@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device
> *dev) platform_set_drvdata(dev, ucb);
>
> ucb->gc.label = "ucb1400_gpio";
> - ucb->gc.base = ucbdata->gpio_offset;
> + ucb->gc.base = ucb->gpio_offset;
> ucb->gc.ngpio = 10;
> ucb->gc.owner = THIS_MODULE;
>
> @@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device
> *dev) if (err)
> goto err;
>
> - if (ucbdata && ucbdata->gpio_setup)
> - err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
> + if (ucb && ucb->gpio_setup)
> + err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
>
> err:
> return err;
> @@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device
> *dev) int err = 0;
> struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
>
> - if (ucbdata && ucbdata->gpio_teardown) {
> - err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
> + if (ucb && ucb->gpio_teardown) {
> + err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
> if (err)
> return err;
> }
> @@ -113,11 +111,6 @@ static void __exit ucb1400_gpio_exit(void)
> platform_driver_unregister(&ucb1400_gpio_driver);
> }
>
> -void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
> -{
> - ucbdata = data;
> -}
> -
> module_init(ucb1400_gpio_init);
> module_exit(ucb1400_gpio_exit);
>
> diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
> index dbe2801..3e24632 100644
> --- a/drivers/mfd/ucb1400_core.c
> +++ b/drivers/mfd/ucb1400_core.c
> @@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
>
> /* GPIO */
> ucb_gpio.ac97 = ac97;
> + if (pdata) {
> + ucb_gpio.gpio_setup = pdata->gpio_setup;
> + ucb_gpio.gpio_teardown = pdata->gpio_teardown;
> + ucb_gpio.gpio_offset = pdata->gpio_offset;
> + }
> ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
> if (!ucb->ucb1400_gpio) {
> err = -ENOMEM;
> diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
> index 1b47909..1a6bfdd 100644
> --- a/include/linux/ucb1400.h
> +++ b/include/linux/ucb1400.h
> @@ -83,15 +83,12 @@
> #define UCB_ID 0x7e
> #define UCB_ID_1400 0x4304
>
> -struct ucb1400_gpio_data {
> - int gpio_offset;
> - int (*gpio_setup)(struct device *dev, int ngpio);
> - int (*gpio_teardown)(struct device *dev, int ngpio);
> -};
> -
> struct ucb1400_gpio {
> struct gpio_chip gc;
> struct snd_ac97 *ac97;
> + int gpio_offset;
> + int (*gpio_setup)(struct device *dev, int ngpio);
> + int (*gpio_teardown)(struct device *dev, int ngpio);
> };
>
> struct ucb1400_ts {
> @@ -112,6 +109,9 @@ struct ucb1400 {
>
> struct ucb1400_pdata {
> int irq;
> + int gpio_offset;
> + int (*gpio_setup)(struct device *dev, int ngpio);
> + int (*gpio_teardown)(struct device *dev, int ngpio);
> };
>
> static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
> @@ -163,11 +163,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97
> *ac97)
>
> unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
> int adcsync);
> -
> -#ifdef CONFIG_GPIO_UCB1400
> -void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
> -#else
> -static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
> {} -#endif
> -
> #endif
next prev parent reply other threads:[~2010-08-09 4:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-09 4:16 [PATCH] UCB1400: Pass ucb1400-gpio data through ac97 bus Marek Vasut
2010-08-09 4:43 ` Marek Vasut [this message]
2010-08-26 23:07 ` Andrew Morton
2010-08-27 5:50 ` Marek Vasut
2010-08-27 6:14 ` Andrew Morton
2010-08-27 6:17 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201008090643.14777.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dtor@mail.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).