From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Alan Stern <stern@rowland.harvard.edu>,
Sarah Sharp <sarah.a.sharp@linux.intel.com>,
David Brownell <david-b@pacbell.net>
Subject: [31/54] USB: EHCI: remove PCI assumption
Date: Wed, 11 Aug 2010 17:00:46 -0700 [thread overview]
Message-ID: <20100812000126.100929823@clark.site> (raw)
In-Reply-To: <20100812000249.GA30948@kroah.com>
2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alan Stern <stern@rowland.harvard.edu>
commit ae68a83bdc1971cb02fefc7a686ba6d077065e71 upstream.
This patch (as1405) fixes a small bug in ehci-hcd's isochronous
scheduler. Not all EHCI controllers are PCI, and the code shouldn't
assume that they are. Instead, introduce a special flag for
controllers which need to delay iso scheduling for full-speed devices
beyond the scheduling threshold.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: David Brownell <david-b@pacbell.net>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-pci.c | 1 +
drivers/usb/host/ehci-sched.c | 10 ++++------
drivers/usb/host/ehci.h | 1 +
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -111,6 +111,7 @@ static int ehci_pci_setup(struct usb_hcd
switch (pdev->vendor) {
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
+ ehci->fs_i_thresh = 1;
if (pdev->device == 0x27cc) {
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1400,7 +1400,6 @@ iso_stream_schedule (
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- struct pci_dev *pdev;
if (sched->span > (mod - SCHEDULE_SLOP)) {
ehci_dbg (ehci, "iso request %p too long\n", urb);
@@ -1427,15 +1426,14 @@ iso_stream_schedule (
* slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
- pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
start = stream->next_uframe;
/* For high speed devices, allow scheduling within the
- * isochronous scheduling threshold. For full speed devices,
- * don't. (Work around for Intel ICH9 bug.)
+ * isochronous scheduling threshold. For full speed devices
+ * and Intel PCI-based controllers, don't (work around for
+ * Intel ICH9 bug).
*/
- if (!stream->highspeed &&
- pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (!stream->highspeed && ehci->fs_i_thresh)
next = now + ehci->i_thresh;
else
next = now;
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controlle
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
next prev parent reply other threads:[~2010-08-12 0:04 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-12 0:02 [00/54] 2.6.34.4 -stable review Greg KH
2010-08-12 0:00 ` [01/54] x86, vmware: Preset lpj values when on VMware Greg KH
2010-08-14 12:22 ` Sven Joachim
2010-08-14 16:21 ` Alok Kataria
2010-08-12 0:00 ` [02/54] ata_piix: fix locking around SIDPR access Greg KH
2010-08-12 0:00 ` [03/54] powerpc: fix build with make 3.82 Greg KH
2010-08-12 0:00 ` [04/54] x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages Greg KH
2010-08-12 0:00 ` [05/54] x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN Greg KH
2010-08-12 0:00 ` [06/54] x86: Add memory modify constraints to xchg() and cmpxchg() Greg KH
2010-08-12 0:00 ` [07/54] staging: rt2870: Add USB ID for Belkin F6D4050 v2 Greg KH
2010-08-12 0:00 ` [08/54] Staging: line6: needs to select SND_PCM Greg KH
2010-08-12 0:00 ` [09/54] Staging: panel: Prevent double-calling of parport_release - fix oops Greg KH
2010-08-12 0:00 ` [10/54] PCI: Do not run NVidia quirks related to MSI with MSI disabled Greg KH
2010-08-12 0:00 ` [11/54] PCI: disable MSI on VIA K8M800 Greg KH
2010-08-12 0:00 ` [12/54] solos-pci: Fix race condition in tasklet RX handling Greg KH
2010-08-12 0:00 ` [13/54] splice: fix misuse of SPLICE_F_NONBLOCK Greg KH
2010-08-12 0:00 ` [14/54] Char: nozomi, fix tty->count counting Greg KH
2010-08-12 0:00 ` [15/54] Char: nozomi, set tty->driver_data appropriately Greg KH
2010-08-12 0:00 ` [16/54] mm: fix corruption of hibernation caused by reusing swap during image saving Greg KH
2010-08-12 0:00 ` [17/54] drivers/video/w100fb.c: ignore void return value / fix build failure Greg KH
2010-08-12 0:00 ` [18/54] iwlwifi: fix TX tracer Greg KH
2010-08-12 0:00 ` [19/54] ide-cd: Do not access completed requests in the irq handler Greg KH
2010-08-12 0:00 ` [20/54] md/raid10: fix deadlock with unaligned read during resync Greg KH
2010-08-12 0:00 ` [21/54] blkdev: cgroup whitelist permission fix Greg KH
2010-08-12 0:00 ` [22/54] eCryptfs: Handle ioctl calls with unlocked and compat functions Greg KH
2010-08-12 0:00 ` [23/54] ecryptfs: release reference to lower mount if interpose fails Greg KH
2010-08-12 0:00 ` [24/54] fs/ecryptfs/file.c: introduce missing free Greg KH
2010-08-12 0:00 ` [25/54] [ARM] pxa/cm-x300: fix ffuart registration Greg KH
2010-08-12 0:00 ` [26/54] signalfd: fill in ssi_int for posix timers and message queues Greg KH
2010-08-12 0:00 ` [27/54] bio, fs: update RWA_MASK, READA and SWRITE to match the corresponding BIO_RW_* bits Greg KH
2010-08-12 0:00 ` [28/54] smsc911x: Add spinlocks around registers access Greg KH
2010-08-12 0:00 ` [29/54] ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID Greg KH
2010-08-12 0:00 ` [30/54] ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h> Greg KH
2010-08-12 0:00 ` Greg KH [this message]
2010-08-12 0:00 ` [32/54] USB: resizing usbmon binary interface buffer causes protection faults Greg KH
2010-08-12 0:00 ` [33/54] USB delay init quirk for logitech Harmony 700-series devices Greg KH
2010-08-12 0:00 ` [34/54] USB: serial: enabling support for Segway RMP in ftdi_sio Greg KH
2010-08-12 0:00 ` [35/54] USB: option: Huawei ETS 1220 support added Greg KH
2010-08-12 0:00 ` [36/54] USB: option: add huawei k3765 k4505 devices to work properly Greg KH
2010-08-12 0:00 ` [37/54] USB: ftdi_sio: device id for Navitator Greg KH
2010-08-12 0:00 ` [38/54] USB: cp210x: Add four new device IDs Greg KH
2010-08-12 0:00 ` [39/54] USB: usbtest: avoid to free coherent buffer in atomic context Greg KH
2010-08-12 0:00 ` [40/54] USB: fix thread-unsafe anchor utiliy routines Greg KH
2010-08-12 0:00 ` [41/54] drm/edid: Fix the HDTV hack sync adjustment Greg KH
2010-08-12 0:00 ` [42/54] Bluetooth: Added support for controller shipped with iMac i5 Greg KH
2010-08-12 0:00 ` [43/54] mtd: gen_nand: fix support for multiple chips Greg KH
2010-08-12 0:00 ` [44/54] jfs: dont allow os2 xattr namespace overlap with others Greg KH
2010-08-12 0:01 ` [45/54] arp_notify: allow drivers to explicitly request a notification event Greg KH
2010-08-12 0:01 ` [46/54] xen: netfront: explicitly generate arp_notify event after migration Greg KH
2010-08-12 0:01 ` [47/54] net: Fix NETDEV_NOTIFY_PEERS to not conflict with NETDEV_BONDING_DESLAVE Greg KH
2010-08-12 0:01 ` [48/54] irq: Add new IRQ flag IRQF_NO_SUSPEND Greg KH
2010-08-12 0:01 ` [49/54] xen: Do not suspend IPI IRQs Greg KH
2010-08-12 0:01 ` [50/54] drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection Greg KH
2010-08-12 0:01 ` [51/54] i915: fix ironlake edp panel setup (v4) Greg KH
2010-08-12 0:01 ` [52/54] [SCSI] ibmvfc: Fix command completion handling Greg KH
2010-08-12 0:01 ` [53/54] [SCSI] ibmvfc: Reduce error recovery timeout Greg KH
2010-08-12 0:01 ` [54/54] md/raid1: delay reads that could overtake behind-writes Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100812000126.100929823@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=david-b@pacbell.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).