public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Srinivas Eeda <srinivas.eeda@oracle.com>,
	Sunil Mushran <sunil.mushran@oracle.com>,
	Joel Becker <joel.becker@oracle.com>
Subject: [09/59] ocfs2 fix o2dlm dlm run purgelist (rev 3)
Date: Tue, 24 Aug 2010 15:24:21 -0700	[thread overview]
Message-ID: <20100824222523.175807603@clark.site> (raw)
In-Reply-To: <20100824224625.GA5449@kroah.com>

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Srinivas Eeda <srinivas.eeda@oracle.com>

commit 7beaf243787f85a2ef9213ccf13ab4a243283fde upstream.

This patch fixes two problems in dlm_run_purgelist

1. If a lockres is found to be in use, dlm_run_purgelist keeps trying to purge
the same lockres instead of trying the next lockres.

2. When a lockres is found unused, dlm_run_purgelist releases lockres spinlock
before setting DLM_LOCK_RES_DROPPING_REF and calls dlm_purge_lockres.
spinlock is reacquired but in this window lockres can get reused. This leads
to BUG.

This patch modifies dlm_run_purgelist to skip lockres if it's in use and purge
 next lockres. It also sets DLM_LOCK_RES_DROPPING_REF before releasing the
lockres spinlock protecting it from getting reused.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ocfs2/dlm/dlmthread.c |   80 +++++++++++++++++++----------------------------
 1 file changed, 34 insertions(+), 46 deletions(-)

--- a/fs/ocfs2/dlm/dlmthread.c
+++ b/fs/ocfs2/dlm/dlmthread.c
@@ -153,45 +153,25 @@ void dlm_lockres_calc_usage(struct dlm_c
 	spin_unlock(&dlm->spinlock);
 }
 
-static int dlm_purge_lockres(struct dlm_ctxt *dlm,
+static void dlm_purge_lockres(struct dlm_ctxt *dlm,
 			     struct dlm_lock_resource *res)
 {
 	int master;
 	int ret = 0;
 
-	spin_lock(&res->spinlock);
-	if (!__dlm_lockres_unused(res)) {
-		mlog(0, "%s:%.*s: tried to purge but not unused\n",
-		     dlm->name, res->lockname.len, res->lockname.name);
-		__dlm_print_one_lock_resource(res);
-		spin_unlock(&res->spinlock);
-		BUG();
-	}
-
-	if (res->state & DLM_LOCK_RES_MIGRATING) {
-		mlog(0, "%s:%.*s: Delay dropref as this lockres is "
-		     "being remastered\n", dlm->name, res->lockname.len,
-		     res->lockname.name);
-		/* Re-add the lockres to the end of the purge list */
-		if (!list_empty(&res->purge)) {
-			list_del_init(&res->purge);
-			list_add_tail(&res->purge, &dlm->purge_list);
-		}
-		spin_unlock(&res->spinlock);
-		return 0;
-	}
+	assert_spin_locked(&dlm->spinlock);
+	assert_spin_locked(&res->spinlock);
 
 	master = (res->owner == dlm->node_num);
 
-	if (!master)
-		res->state |= DLM_LOCK_RES_DROPPING_REF;
-	spin_unlock(&res->spinlock);
 
 	mlog(0, "purging lockres %.*s, master = %d\n", res->lockname.len,
 	     res->lockname.name, master);
 
 	if (!master) {
+		res->state |= DLM_LOCK_RES_DROPPING_REF;
 		/* drop spinlock...  retake below */
+		spin_unlock(&res->spinlock);
 		spin_unlock(&dlm->spinlock);
 
 		spin_lock(&res->spinlock);
@@ -209,31 +189,35 @@ static int dlm_purge_lockres(struct dlm_
 		mlog(0, "%s:%.*s: dlm_deref_lockres returned %d\n",
 		     dlm->name, res->lockname.len, res->lockname.name, ret);
 		spin_lock(&dlm->spinlock);
+		spin_lock(&res->spinlock);
 	}
 
-	spin_lock(&res->spinlock);
 	if (!list_empty(&res->purge)) {
 		mlog(0, "removing lockres %.*s:%p from purgelist, "
 		     "master = %d\n", res->lockname.len, res->lockname.name,
 		     res, master);
 		list_del_init(&res->purge);
-		spin_unlock(&res->spinlock);
 		dlm_lockres_put(res);
 		dlm->purge_count--;
-	} else
-		spin_unlock(&res->spinlock);
+	}
+
+	if (!__dlm_lockres_unused(res)) {
+		mlog(ML_ERROR, "found lockres %s:%.*s: in use after deref\n",
+		     dlm->name, res->lockname.len, res->lockname.name);
+		__dlm_print_one_lock_resource(res);
+		BUG();
+	}
 
 	__dlm_unhash_lockres(res);
 
 	/* lockres is not in the hash now.  drop the flag and wake up
 	 * any processes waiting in dlm_get_lock_resource. */
 	if (!master) {
-		spin_lock(&res->spinlock);
 		res->state &= ~DLM_LOCK_RES_DROPPING_REF;
 		spin_unlock(&res->spinlock);
 		wake_up(&res->wq);
-	}
-	return 0;
+	} else
+		spin_unlock(&res->spinlock);
 }
 
 static void dlm_run_purge_list(struct dlm_ctxt *dlm,
@@ -252,17 +236,7 @@ static void dlm_run_purge_list(struct dl
 		lockres = list_entry(dlm->purge_list.next,
 				     struct dlm_lock_resource, purge);
 
-		/* Status of the lockres *might* change so double
-		 * check. If the lockres is unused, holding the dlm
-		 * spinlock will prevent people from getting and more
-		 * refs on it -- there's no need to keep the lockres
-		 * spinlock. */
 		spin_lock(&lockres->spinlock);
-		unused = __dlm_lockres_unused(lockres);
-		spin_unlock(&lockres->spinlock);
-
-		if (!unused)
-			continue;
 
 		purge_jiffies = lockres->last_used +
 			msecs_to_jiffies(DLM_PURGE_INTERVAL_MS);
@@ -274,15 +248,29 @@ static void dlm_run_purge_list(struct dl
 			 * in tail order, we can stop at the first
 			 * unpurgable resource -- anyone added after
 			 * him will have a greater last_used value */
+			spin_unlock(&lockres->spinlock);
 			break;
 		}
 
+		/* Status of the lockres *might* change so double
+		 * check. If the lockres is unused, holding the dlm
+		 * spinlock will prevent people from getting and more
+		 * refs on it. */
+		unused = __dlm_lockres_unused(lockres);
+		if (!unused ||
+		    (lockres->state & DLM_LOCK_RES_MIGRATING)) {
+			mlog(0, "lockres %s:%.*s: is in use or "
+			     "being remastered, used %d, state %d\n",
+			     dlm->name, lockres->lockname.len,
+			     lockres->lockname.name, !unused, lockres->state);
+			list_move_tail(&dlm->purge_list, &lockres->purge);
+			spin_unlock(&lockres->spinlock);
+			continue;
+		}
+
 		dlm_lockres_get(lockres);
 
-		/* This may drop and reacquire the dlm spinlock if it
-		 * has to do migration. */
-		if (dlm_purge_lockres(dlm, lockres))
-			BUG();
+		dlm_purge_lockres(dlm, lockres);
 
 		dlm_lockres_put(lockres);
 



  parent reply	other threads:[~2010-08-24 22:53 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-24 22:46 [00/59] 2.6.32.21-stable review Greg KH
2010-08-24 22:24 ` [01/59] memstick: fix hangs on unexpected device removal in mspro_blk Greg KH
2010-08-24 22:24 ` [02/59] ASoC: Fix inverted mute controls for WM8580 Greg KH
2010-08-24 22:24 ` [03/59] ASoC: Remove DSP mode support for WM8776 Greg KH
2010-08-24 22:24 ` [04/59] ALSA: riptide - Fix detection / load of firmware files Greg KH
2010-08-24 22:24 ` [05/59] ALSA: emu10k1 - delay the PCM interrupts (add pcm_irq_delay parameter) Greg KH
2010-08-24 22:24 ` [06/59] ALSA: hda - Fix missing stream for second ADC on Realtek ALC260 HDA codec Greg KH
2010-08-24 22:24 ` [07/59] ocfs2: do not overwrite error codes in ocfs2_init_acl Greg KH
2010-08-24 22:24 ` [08/59] ocfs2/dlm: fix a dead lock Greg KH
2010-08-24 22:24 ` Greg KH [this message]
2010-08-24 22:24 ` [10/59] ocfs2: Count more refcount records in file system fragmentation Greg KH
2010-08-24 22:24 ` [11/59] ocfs2/dlm: avoid incorrect bit set in refmap on recovery master Greg KH
2010-08-24 22:24 ` [12/59] ocfs2/dlm: remove potential deadlock -V3 Greg KH
2010-08-24 22:24 ` [13/59] x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues Greg KH
2010-08-24 22:24 ` [14/59] x86, apic: Fix apic=debug boot crash Greg KH
2010-08-24 22:24 ` [15/59] Fix the nested PR lock calling issue in ACL Greg KH
2010-08-24 22:24 ` [16/59] hwmon: (pc87360) Fix device resource declaration Greg KH
2010-08-24 22:24 ` [17/59] ARM: Tighten check for allowable CPSR values Greg KH
2010-08-24 22:24 ` [18/59] nfs: Add "lookupcache" to displayed mount options Greg KH
2010-08-24 22:24 ` [19/59] ath5k: disable ASPM L0s for all cards Greg KH
2010-08-24 22:24 ` [20/59] pxa3xx: fix ns2cycle equation Greg KH
2010-08-24 22:24 ` [21/59] drm/i915/edp: Flush the write before waiting for PLLs Greg KH
2010-08-24 22:24 ` [22/59] dm mpath: fix NULL pointer dereference when path parameters missing Greg KH
2010-08-24 22:24 ` [23/59] dm ioctl: release _hash_lock between devices in remove_all Greg KH
2010-08-24 22:24 ` [24/59] mm: make the vma list be doubly linked Greg KH
2010-08-24 22:24 ` [25/59] mm: make the mlock() stack guard page checks stricter Greg KH
2010-08-24 22:24 ` [26/59] mm: make stack guard page logic use vm_prev pointer Greg KH
2010-08-24 22:24 ` [27/59] drm/i915: fix hibernation since i915 self-reclaim fixes Greg KH
2010-08-24 22:24 ` [28/59] drm/i915: add reclaimable to i915 self-reclaimable page allocations Greg KH
2010-08-24 22:24 ` [29/59] slab: fix object alignment Greg KH
2010-08-24 22:24 ` [30/59] sunxvr500: Ignore secondary output PCI devices Greg KH
2010-08-24 22:24 ` [31/59] sparc64: Add missing ID to parport probing code Greg KH
2010-08-24 22:24 ` [32/59] sparc64: Fix rwsem constant bug leading to hangs Greg KH
2010-08-24 22:24 ` [33/59] sparc64: Fix atomic64_t routine return values Greg KH
2010-08-24 22:24 ` [34/59] net: Fix a memmove bug in dev_gro_receive() Greg KH
2010-08-24 22:24 ` [35/59] can: add limit for nframes and clean up signed/unsigned variables Greg KH
2010-08-24 22:24 ` [36/59] isdn: fix information leak Greg KH
2010-08-24 22:24 ` [37/59] act_nat: the checksum of ICMP doesnt have pseudo header Greg KH
2010-08-24 22:24 ` [38/59] vmscan: raise the bar to PAGEOUT_IO_SYNC stalls Greg KH
2010-08-24 22:24 ` [39/59] pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq Greg KH
2010-08-24 22:24 ` [40/59] ext4: consolidate in_range() definitions Greg KH
2010-08-24 22:24 ` [41/59] Oprofile: Change CPUIDS from decimal to hex, and add some comments Greg KH
2010-08-24 22:24 ` [42/59] oprofile: add support for Intel processor model 30 Greg KH
2010-08-24 22:24 ` [43/59] fixes for using make 3.82 Greg KH
2010-08-24 22:24 ` [44/59] ALSA: intel8x0: Mute External Amplifier by default for ThinkPad X31 Greg KH
2010-08-24 22:24 ` [45/59] netlink: fix compat recvmsg Greg KH
2010-08-24 22:24 ` [46/59] drm/radeon/kms: fix typo in radeon_compute_pll_gain Greg KH
2010-08-24 22:24 ` [47/59] drm: stop information leak of old kernel stack Greg KH
2010-08-24 22:25 ` [48/59] powerpc: Fix typo in uImage target Greg KH
2010-08-24 22:25 ` [49/59] powerpc: Initialise paca->kstack before early_setup_secondary Greg KH
2010-08-26  7:10   ` Matt Evans
2010-08-26 23:25     ` Greg KH
2010-08-24 22:25 ` [50/59] USB: option: add Celot CT-650 Greg KH
2010-08-24 22:25 ` [51/59] USB: add device IDs for igotu to navman Greg KH
2010-08-24 22:25 ` [52/59] USB: pl2303: New vendor and product id Greg KH
2010-08-24 22:25 ` [53/59] USB: CP210x Fix Break On/Off Greg KH
2010-08-24 22:25 ` [54/59] USB: ftdi_sio: fix endianess of max packet size Greg KH
2010-08-24 22:25 ` [55/59] USB: io_ti: check firmware version before updating Greg KH
2010-08-24 22:25 ` [56/59] USB: xhci: Remove buggy assignment in next_trb() Greg KH
2010-08-24 22:25 ` [57/59] USB: ftdi_sio: Add ID for Ionics PlugComputer Greg KH
2010-08-24 22:25 ` [58/59] USB: ftdi_sio: add product ID for Lenz LI-USB Greg KH
2010-08-24 22:25 ` [59/59] x86, apic: ack all pending irqs when crashed/on kexec Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100824222523.175807603@clark.site \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=joel.becker@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=srinivas.eeda@oracle.com \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=sunil.mushran@oracle.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox