[PATCHv2 2/4] leds: Driver for National Semiconductors LP5523 chip

Samu Onkalo
2010-09-29T09:10:58Z

LP5523 chip is nine channel led driver with programmable engines.
Driver provides support for that chip for direct access via led class or
via programmable engines.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
---
drivers/leds/leds-lp5523.c | 1065 +++++++++++++++++++++++++++++++++++++++++++
include/linux/leds-lp5523.h | 48 ++
2 files changed, 1113 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-lp5523.c
create mode 100644 include/linux/leds-lp5523.h

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
new file mode 100644
index 0000000..1e11fcc
--- /dev/null
+++ b/drivers/leds/leds-lp5523.c
@@ -0,0 +1,1065 @@
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE 0x00
+#define LP5523_REG_OP_MODE 0x01
+#define LP5523_REG_RATIOMETRIC_MSB 0x02
+#define LP5523_REG_RATIOMETRIC_LSB 0x03
+#define LP5523_REG_ENABLE_LEDS_MSB 0x04
+#define LP5523_REG_ENABLE_LEDS_LSB 0x05
+#define LP5523_REG_LED_CNTRL_BASE 0x06
+#define LP5523_REG_LED_PWM_BASE 0x16
+#define LP5523_REG_LED_CURRENT_BASE 0x26
+#define LP5523_REG_CONFIG 0x36
+#define LP5523_REG_CHANNEL1_PC 0x37
+#define LP5523_REG_CHANNEL2_PC 0x38
+#define LP5523_REG_CHANNEL3_PC 0x39
+#define LP5523_REG_STATUS 0x3a
+#define LP5523_REG_GPO 0x3b
+#define LP5523_REG_VARIABLE 0x3c
+#define LP5523_REG_RESET 0x3d
+#define LP5523_REG_TEMP_CTRL 0x3e
+#define LP5523_REG_TEMP_READ 0x3f
+#define LP5523_REG_TEMP_WRITE 0x40
+#define LP5523_REG_LED_TEST_CTRL 0x41
+#define LP5523_REG_LED_TEST_ADC 0x42
+#define LP5523_REG_ENG1_VARIABLE 0x45
+#define LP5523_REG_ENG2_VARIABLE 0x46
+#define LP5523_REG_ENG3_VARIABLE 0x47
+#define LP5523_REG_MASTER_FADER1 0x48
+#define LP5523_REG_MASTER_FADER2 0x49
+#define LP5523_REG_MASTER_FADER3 0x4a
+#define LP5523_REG_CH1_PROG_START 0x4c
+#define LP5523_REG_CH2_PROG_START 0x4d
+#define LP5523_REG_CH3_PROG_START 0x4e
+#define LP5523_REG_PROG_PAGE_SEL 0x4f
+#define LP5523_REG_PROG_MEM 0x50
+
+#define LP5523_CMD_LOAD 0x15 /* 00010101 */
+#define LP5523_CMD_RUN 0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED 0x00 /* 00000000 */
+
+#define LP5523_ENABLE 0x40
+#define LP5523_AUTO_INC 0x40
+#define LP5523_PWR_SAVE 0x20
+#define LP5523_PWM_PWR_SAVE 0x04
+#define LP5523_CP_1 0x08
+#define LP5523_CP_1_5 0x10
+#define LP5523_CP_AUTO 0x18
+#define LP5523_INT_CLK 0x01
+#define LP5523_AUTO_CLK 0x02
+#define LP5523_EN_LEDTEST 0x80
+#define LP5523_LEDTEST_DONE 0x80
+
+#define LP5523_DEFAULT_CURRENT 50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH 32 /* in bytes */
+#define LP5523_PROGRAM_PAGES 6
+#define LP5523_ADC_SHORTCIRC_LIM 80
+
+#define LP5523_LEDS 9
+#define LP5523_ENGINES 3
+
+#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED 0x08
+
+#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id) (((id) - 1) * 2)
+
+struct lp5523_engine {
+ const struct attribute_group *attributes;
+ int id;
+ u8 mode;
+ u8 prog_page;
+ u8 mux_page;
+ u16 led_mux;
+ u8 engine_mask;
+};
+
+struct lp5523_led {
+ int id;
+ u8 chan_nr;
+ u8 led_current;
+ u8 max_current;
+ struct led_classdev cdev;
+ struct work_struct brightness_work;
+ u8 brightness;
+};
+
+struct lp5523_chip {
+ struct mutex lock; /* Serialize control */
+ struct i2c_client *client;
+ struct lp5523_engine engines[LP5523_ENGINES];
+ struct lp5523_led leds[LP5523_LEDS];
+ struct lp5523_platform_data *pdata;
+ u8 num_channels;
+ u8 num_leds;
+};
+
+#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev)
+
+static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+ return container_of(engine, struct lp5523_chip,
+ engines[engine->id - 1]);
+}
+
+static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+ return container_of(led, struct lp5523_chip,
+ leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+ s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ return -EIO;
+
+ *buf = ret;
+ return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+ int ret;
+ u8 buf;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+ if (ret)
+ return ret;
+ ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+ if (ret)
+ return ret;
+ if (buf == 0x40)
+ return 0;
+ else
+ return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int ret = 0;
+ u8 status;
+
+ /* one pattern per engine setting led mux start and stop addresses */
+ u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+ };
+
+ lp5523_write(client, LP5523_REG_RESET, 0xff);
+
+ usleep_range(10000, 100000);
+
+ ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+ /* Chip startup time after reset is 500 us */
+ usleep_range(1000, 10000);
+
+ ret |= lp5523_write(client, LP5523_REG_CONFIG,
+ LP5523_AUTO_INC | LP5523_PWR_SAVE |
+ LP5523_CP_AUTO | LP5523_AUTO_CLK |
+ LP5523_PWM_PWR_SAVE);
+
+ /* turn on all leds */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+ ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+ /* hardcode 32 bytes of memory for each engine from program memory */
+ ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+ ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+ ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+ /* write led mux address space for each channel */
+ ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+ ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+ ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+ if (ret) {
+ dev_err(&client->dev, "could not load mux programs\n");
+ return -1;
+ }
+
+ /* set all engines exec state and mode to run 00101010 */
+ ret |= lp5523_write(client, LP5523_REG_ENABLE,
+ (LP5523_CMD_RUN | LP5523_ENABLE));
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+ if (ret) {
+ dev_err(&client->dev, "could not start mux programs\n");
+ return -1;
+ }
+
+ /* Wait 3ms and check the engine status */
+ usleep_range(3000, 20000);
+ lp5523_read(client, LP5523_REG_STATUS, &status);
+ status &= LP5523_ENG_STATUS_MASK;
+
+ if (status == LP5523_ENG_STATUS_MASK) {
+ dev_dbg(&client->dev, "all engines configured\n");
+ } else {
+ dev_info(&client->dev, "status == %x\n", status);
+ dev_err(&client->dev, "cound not configure LED engine\n");
+ return -1;
+ }
+
+ dev_info(&client->dev, "disabling engines\n");
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+ return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 engine_state;
+
+ ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+ if (ret)
+ goto fail;
+
+ engine_state &= ~(engine->engine_mask);
+
+ /* set mode only for this engine */
+ mode &= engine->engine_mask;
+
+ engine_state |= mode;
+
+ ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+ return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+ (u8)(mux >> 8));
+ ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+ engine->led_mux = mux;
+
+ return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+
+ int ret = 0;
+
+ ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+ engine->prog_page);
+ ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+ LP5523_PROGRAM_LENGTH, pattern);
+
+ return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret;
+
+ ret = lp5523_write(client, LP5523_REG_ENABLE,
+ LP5523_CMD_RUN | LP5523_ENABLE);
+ if (ret)
+ goto fail;
+
+ ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+ return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+ int i;
+ u16 tmp_mux = 0;
+ len = len < LP5523_LEDS ? len : LP5523_LEDS;
+ for (i = 0; i < len; i++) {
+ switch (buf[i]) {
+ case '1':
+ tmp_mux |= (1 << i);
+ break;
+ case '0':
+ break;
+ case '\n':
+ i = len;
+ break;
+ default:
+ return -1;
+ }
+ }
+ *mux = tmp_mux;
+
+ return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+ int i, pos = 0;
+ for (i = 0; i < LP5523_LEDS; i++)
+ pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+ array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/* Sysfs interface */
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ char mux[LP5523_LEDS + 1];
+
+ lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+ return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr) \
+static ssize_t show_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_leds(dev, attr, buf, nr); \
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ u16 mux = 0;
+
+ if (lp5523_mux_parse(buf, &mux, len))
+ return -EINVAL;
+
+ if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+ return -EINVAL;
+
+ return len;
+}
+
+#define store_leds(nr) \
+static ssize_t store_engine##nr##_leds(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_leds(dev, attr, buf, len, nr); \
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i, ret, pos = 0;
+ int led = 0;
+ u8 status, adc, vdd;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (ret < 0)
+ goto fail;
+
+ /* Check that ext clock is really in use if requested */
+ if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+ if ((status & LP5523_EXT_CLK_USED) == 0)
+ goto fail;
+
+ /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+ lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | 16);
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+ vdd--; /* There may be some fluctuation in measurement */
+
+ for (i = 0; i < LP5523_LEDS; i++) {
+ /* Skip non-existing channels */
+ if (chip->pdata->led_config[i].led_current == 0)
+ continue;
+
+ /* Set default current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->pdata->led_config[i].led_current);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+ /* let current stabilize 2ms before measurements start */
+ usleep_range(2000, 10000);
+ lp5523_write(chip->client,
+ LP5523_REG_LED_TEST_CTRL,
+ LP5523_EN_LEDTEST | i);
+ /* ledtest takes 2.7ms */
+ usleep_range(3000, 10000);
+ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+ if (!(status & LP5523_LEDTEST_DONE))
+ usleep_range(3000, 10000);
+ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+ if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+ pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+ lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+ /* Restore current */
+ lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + i,
+ chip->leds[led].led_current);
+ led++;
+ }
+ if (pos == 0)
+ pos = sprintf(buf, "OK\n");
+ goto release_lock;
+fail:
+ pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+ mutex_unlock(&chip->lock);
+
+ return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct lp5523_led *led = cdev_to_led(cdev);
+
+ led->brightness = (u8)brightness;
+
+ schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+ struct lp5523_led *led = container_of(work,
+ struct lp5523_led,
+ brightness_work);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ struct i2c_client *client = chip->client;
+
+ mutex_lock(&chip->lock);
+
+ lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+ led->brightness);
+
+ mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+ const char *buf, size_t len)
+{
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ int ret, nrchars, offset = 0, i = 0;
+ char c[3];
+ unsigned cmd;
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+ while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto fail;
+ pattern[i] = (u8)cmd;
+
+ offset += nrchars;
+ i++;
+ }
+
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto fail;
+
+ mutex_lock(&chip->lock);
+
+ ret = lp5523_load_program(engine, pattern);
+ mutex_unlock(&chip->lock);
+
+ if (ret) {
+ dev_err(&client->dev, "failed loading pattern\n");
+ return ret;
+ }
+
+ return len;
+fail:
+ dev_err(&client->dev, "wrong pattern format\n");
+ return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr) \
+static ssize_t store_engine##nr##_load(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_load(dev, attr, buf, len, nr); \
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ switch (chip->engines[nr - 1].mode) {
+ case LP5523_CMD_RUN:
+ return sprintf(buf, "run\n");
+ case LP5523_CMD_LOAD:
+ return sprintf(buf, "load\n");
+ case LP5523_CMD_DISABLED:
+ return sprintf(buf, "disabled\n");
+ default:
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+#define show_mode(nr) \
+static ssize_t show_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return show_engine_mode(dev, attr, buf, nr); \
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct lp5523_engine *engine = &chip->engines[nr - 1];
+ mutex_lock(&chip->lock);
+
+ if (!strncmp(buf, "run", 3))
+ lp5523_set_mode(engine, LP5523_CMD_RUN);
+ else if (!strncmp(buf, "load", 4))
+ lp5523_set_mode(engine, LP5523_CMD_LOAD);
+ else if (!strncmp(buf, "disabled", 8))
+ lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+ mutex_unlock(&chip->lock);
+ return len;
+}
+
+#define store_mode(nr) \
+static ssize_t store_engine##nr##_mode(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ return store_engine_mode(dev, attr, buf, len, nr); \
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5523_led *led = cdev_to_led(led_cdev);
+ struct lp5523_chip *chip = led_to_lp5523(led);
+ ssize_t ret;
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ if (curr > led->max_current)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
+ ret = lp5523_write(chip->client,
+ LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+ (u8)curr);
+ mutex_unlock(&chip->lock);
+
+ if (ret < 0)
+ return ret;
+
+ led->led_current = (u8)curr;
+
+ return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+ &dev_attr_led_current.attr,
+ &dev_attr_max_current.attr,
+ NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+ .attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+ show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+ show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+ show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+ show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+ show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+ show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+ &dev_attr_engine1_mode.attr,
+ &dev_attr_engine2_mode.attr,
+ &dev_attr_engine3_mode.attr,
+ &dev_attr_selftest.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+ &dev_attr_engine1_load.attr,
+ &dev_attr_engine1_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+ &dev_attr_engine2_load.attr,
+ &dev_attr_engine2_leds.attr,
+ NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+ &dev_attr_engine3_load.attr,
+ &dev_attr_engine3_leds.attr,
+ NULL
+};
+
+static const struct attribute_group lp5523_group = {
+ .attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+ {.attrs = lp5523_engine1_attributes },
+ {.attrs = lp5523_engine2_attributes },
+ {.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ int ret;
+
+ ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int i;
+
+ sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+ if (chip->engines[i].mode == LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+ for (i = 0; i < chip->num_leds; i++)
+ sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/* Set chip operating mode */
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+ /* engine to chip */
+ struct lp5523_chip *chip = engine_to_lp5523(engine);
+ struct i2c_client *client = chip->client;
+ struct device *dev = &client->dev;
+ int ret = 0;
+
+ /* if in that mode already do nothing, except for run */
+ if (mode == engine->mode && mode != LP5523_CMD_RUN)
+ return 0;
+
+ if (mode == LP5523_CMD_RUN) {
+ ret = lp5523_run_program(engine);
+ } else if (mode == LP5523_CMD_LOAD) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+ ret = sysfs_create_group(&dev->kobj, engine->attributes);
+ if (ret)
+ return ret;
+ } else if (mode == LP5523_CMD_DISABLED) {
+ lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+ }
+
+ /* remove load attribute from sysfs if not in load mode */
+ if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+ sysfs_remove_group(&dev->kobj, engine->attributes);
+
+ engine->mode = mode;
+
+ return ret;
+}
+
+/*--------------------------------------------------------------*/
+/* Probe, Attach, Remove */
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+ if (id < 1 || id > LP5523_ENGINES)
+ return -1;
+ engine->id = id;
+ engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+ engine->prog_page = id - 1;
+ engine->mux_page = id + 2;
+ engine->attributes = &lp5523_engine_group[id - 1];
+
+ return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+ int chan, struct lp5523_platform_data *pdata)
+{
+ char name[32];
+ int res;
+
+ if (chan >= LP5523_LEDS)
+ return -EINVAL;
+
+ if (pdata->led_config[chan].led_current) {
+ led->led_current = pdata->led_config[chan].led_current;
+ led->max_current = pdata->led_config[chan].max_current;
+ led->chan_nr = pdata->led_config[chan].chan_nr;
+
+ if (led->chan_nr >= LP5523_LEDS) {
+ dev_err(dev, "Use channel numbers between 0 and %d\n",
+ LP5523_LEDS - 1);
+ return -EINVAL;
+ }
+
+ snprintf(name, 32, "lp5523:channel%d", chan);
+
+ led->cdev.name = name;
+ led->cdev.brightness_set = lp5523_set_brightness;
+ res = led_classdev_register(dev, &led->cdev);
+ if (res < 0) {
+ dev_err(dev, "couldn't register led on channel %d\n",
+ chan);
+ return res;
+ }
+ res = sysfs_create_group(&led->cdev.dev->kobj,
+ &lp5523_led_attribute_group);
+ if (res < 0) {
+ dev_err(dev, "couldn't register current attribute\n");
+ led_classdev_unregister(&led->cdev);
+ return res;
+ }
+ } else {
+ led->led_current = 0;
+ }
+ return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp5523_chip *chip;
+ struct lp5523_platform_data *pdata;
+ int ret, i, led;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ ret = -EINVAL;
+ goto fail1;
+ }
+
+ mutex_init(&chip->lock);
+
+ chip->pdata = pdata;
+
+ if (pdata->setup_resources) {
+ ret = pdata->setup_resources();
+ if (ret < 0)
+ goto fail1;
+ }
+
+ if (pdata->enable) {
+ pdata->enable(0);
+ usleep_range(1000, 10000);
+ pdata->enable(1);
+ usleep_range(1000, 10000); /* Spec says min 500us */
+ }
+
+ ret = lp5523_detect(client);
+ if (ret)
+ goto fail2;
+
+ dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+ /* Initialize engines */
+ for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+ ret = lp5523_init_engine(&chip->engines[i], i + 1);
+ if (ret) {
+ dev_err(&client->dev, "error initializing engine\n");
+ goto fail2;
+ }
+ }
+ ret = lp5523_configure(client);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring chip\n");
+ goto fail2;
+ }
+
+ /* Initialize leds */
+ chip->num_channels = pdata->num_channels;
+ chip->num_leds = 0;
+ led = 0;
+ for (i = 0; i < pdata->num_channels; i++) {
+ /* Do not initialize channels that are not connected */
+ if (pdata->led_config[i].led_current == 0)
+ continue;
+
+ ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+ if (ret) {
+ dev_err(&client->dev, "error initializing leds\n");
+ goto fail3;
+ }
+ chip->num_leds++;
+
+ chip->leds[led].id = led;
+ /* Set LED current */
+ lp5523_write(client,
+ LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+ chip->leds[led].led_current);
+
+ INIT_WORK(&(chip->leds[led].brightness_work),
+ lp5523_led_brightness_work);
+
+ led++;
+ }
+
+ ret = lp5523_register_sysfs(client);
+ if (ret) {
+ dev_err(&client->dev, "registering sysfs failed\n");
+ goto fail3;
+ }
+ return ret;
+fail3:
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+fail2:
+ if (pdata->enable)
+ pdata->enable(0);
+ if (pdata->release_resources)
+ pdata->release_resources();
+fail1:
+ kfree(chip);
+ return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+ struct lp5523_chip *chip = i2c_get_clientdata(client);
+ int i;
+
+ lp5523_unregister_sysfs(client);
+
+ for (i = 0; i < chip->num_leds; i++) {
+ led_classdev_unregister(&chip->leds[i].cdev);
+ cancel_work_sync(&chip->leds[i].brightness_work);
+ }
+
+ if (chip->pdata->enable)
+ chip->pdata->enable(0);
+ if (chip->pdata->release_resources)
+ chip->pdata->release_resources();
+ kfree(chip);
+ return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+ { "lp5523", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+ .driver = {
+ .name = "lp5523",
+ },
+ .probe = lp5523_probe,
+ .remove = lp5523_remove,
+ .id_table = lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&lp5523_driver);
+
+ if (ret < 0)
+ printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+ return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+ i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h
new file mode 100644
index 0000000..afb3b49
--- /dev/null
+++ b/include/linux/leds-lp5523.h
@@ -0,0 +1,48 @@
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+ u8 chan_nr;
+ u8 led_current; /* mA x10, 0 if led is not connected */
+ u8 max_current;
+};
+
+#define LP5523_CLOCK_AUTO 0
+#define LP5523_CLOCK_INT 1
+#define LP5523_CLOCK_EXT 2
+
+struct lp5523_platform_data {
+ struct lp5523_led_config *led_config;
+ u8 num_channels;
+ u8 clock_mode;
+ int (*setup_resources)(void);
+ void (*release_resources)(void);
+ void (*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5523_H */
+
--
1.6.0.4