From: Arnd Bergmann <arnd@arndb.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Subject: [GIT PULL] automatic BKL conversion to mutexes
Date: Fri, 22 Oct 2010 13:15:46 +0200 [thread overview]
Message-ID: <201010221315.46143.arnd@arndb.de> (raw)
Hi Linus,
These are all trivial conversions where we can replace the BKL
in one driver with a mutex, done with a script to avoid typos.
A number of the patches that were originally in this series have
been replaced by the maintainers with other patches to remove
the BKL without a replacement, where that is safe to do. The same
can still be done in the future for many of them, but the
replacement is the fast and safe option in order to remove most
of the trivial usage introduced over the years during BKL pushdown.
There is one known conflict in the pcmcia drivers that should
be trivial to resolve (one line added versus another line removed).
Please pull from:
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arnd/bkl.git trivial
Arnd Bergmann (6):
scsi: autoconvert trivial BKL users to private mutex
mtd: autoconvert trivial BKL users to private mutex
mac: autoconvert trivial BKL users to private mutex
ipmi: autoconvert trivial BKL users to private mutex
drivers: autoconvert trivial BKL users to private mutex
block: autoconvert trivial BKL users to private mutex
block/bsg.c | 3 --
drivers/block/DAC960.c | 11 ++++---
drivers/block/amiflop.c | 19 ++++++------
drivers/block/aoe/aoeblk.c | 9 +++--
drivers/block/aoe/aoechr.c | 9 +++--
drivers/block/ataflop.c | 15 +++++----
drivers/block/brd.c | 7 ++--
drivers/block/cciss.c | 14 ++++----
drivers/block/cpqarray.c | 15 +++++----
drivers/block/drbd/drbd_main.c | 11 ++++---
drivers/block/floppy.c | 16 +++++-----
drivers/block/loop.c | 11 ++++---
drivers/block/nbd.c | 7 ++--
drivers/block/paride/pcd.c | 15 +++++----
drivers/block/paride/pd.c | 15 +++++----
drivers/block/paride/pf.c | 17 ++++++-----
drivers/block/paride/pg.c | 7 ++--
drivers/block/paride/pt.c | 19 ++++++------
drivers/block/pktcdvd.c | 16 +++++-----
drivers/block/swim.c | 15 +++++----
drivers/block/swim3.c | 15 +++++----
drivers/block/ub.c | 15 +++++----
drivers/block/viodasd.c | 11 ++++---
drivers/block/xd.c | 7 ++--
drivers/block/xen-blkfront.c | 11 ++++---
drivers/block/xsysace.c | 11 ++++---
drivers/block/z2ram.c | 15 +++++----
drivers/cdrom/gdrom.c | 15 +++++----
drivers/cdrom/viocd.c | 15 +++++----
drivers/char/apm-emulation.c | 11 ++++---
drivers/char/applicom.c | 9 +++--
drivers/char/ds1302.c | 15 +++++----
drivers/char/ds1620.c | 8 ++--
drivers/char/dsp56k.c | 27 +++++++++--------
drivers/char/dtlk.c | 8 ++--
drivers/char/generic_nvram.c | 7 ++--
drivers/char/genrtc.c | 13 ++++----
drivers/char/i8k.c | 7 ++--
drivers/char/ip2/ip2main.c | 8 ++--
drivers/char/ipmi/ipmi_devintf.c | 14 ++++----
drivers/char/ipmi/ipmi_watchdog.c | 8 ++--
drivers/char/lp.c | 15 +++++----
drivers/char/mbcs.c | 8 ++--
drivers/char/mmtimer.c | 7 ++--
drivers/char/mwave/mwavedd.c | 44 ++++++++++++++--------------
drivers/char/nvram.c | 11 ++++---
drivers/char/nwflash.c | 12 ++++----
drivers/char/pcmcia/cm4000_cs.c | 11 ++++---
drivers/char/pcmcia/cm4040_cs.c | 7 ++--
drivers/char/ppdev.c | 8 ++--
drivers/char/rio/rio_linux.c | 7 ++--
drivers/char/snsc.c | 9 +++--
drivers/char/toshiba.c | 9 +++--
drivers/char/viotape.c | 11 ++++---
drivers/char/xilinx_hwicap/xilinx_hwicap.c | 6 ++--
drivers/hwmon/fschmd.c | 6 ++--
drivers/hwmon/w83793.c | 6 ++--
drivers/ide/ide-cd.c | 14 ++++----
drivers/ide/ide-disk_ioctl.c | 7 ++--
drivers/ide/ide-floppy_ioctl.c | 7 ++--
drivers/ide/ide-gd.c | 10 +++---
drivers/ide/ide-tape.c | 19 ++++++------
drivers/input/misc/hp_sdc_rtc.c | 7 ++--
drivers/macintosh/adb.c | 10 +++---
drivers/macintosh/smu.c | 6 ++--
drivers/macintosh/via-pmu.c | 11 ++++---
drivers/md/dm.c | 10 +++---
drivers/md/md.c | 13 ++++----
drivers/memstick/core/mspro_block.c | 11 ++++---
drivers/message/fusion/mptctl.c | 15 +++++----
drivers/message/i2o/i2o_block.c | 15 +++++----
drivers/message/i2o/i2o_config.c | 23 +++++++-------
drivers/misc/phantom.c | 11 ++++---
drivers/mmc/card/block.c | 10 +++---
drivers/mtd/mtd_blkdevs.c | 14 ++++----
drivers/mtd/mtdchar.c | 15 +++++----
drivers/pci/hotplug/cpqphp_sysfs.c | 13 ++++----
drivers/rtc/rtc-m41t80.c | 13 ++++----
drivers/s390/char/tape_block.c | 13 ++++----
drivers/sbus/char/jsflash.c | 24 ++++++++-------
drivers/scsi/3w-9xxx.c | 7 ++--
drivers/scsi/3w-sas.c | 7 ++--
drivers/scsi/3w-xxxx.c | 9 ++---
drivers/scsi/aacraid/linit.c | 15 +++++----
drivers/scsi/ch.c | 8 ++--
drivers/scsi/dpt_i2o.c | 18 ++++++------
drivers/scsi/gdth.c | 11 ++++---
drivers/scsi/megaraid.c | 8 ++--
drivers/scsi/megaraid/megaraid_mm.c | 8 ++--
drivers/scsi/megaraid/megaraid_sas.c | 2 -
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 11 ++++---
drivers/scsi/osst.c | 15 +++++----
drivers/scsi/scsi_tgt_if.c | 2 -
drivers/scsi/sg.c | 12 ++++---
drivers/scsi/sr.c | 14 ++++----
drivers/scsi/st.c | 12 ++++----
drivers/staging/hv/blkvsc_drv.c | 11 ++++---
drivers/staging/spectra/ffsport.c | 7 ++--
drivers/telephony/ixj.c | 7 ++--
drivers/watchdog/cpwd.c | 15 +++++----
100 files changed, 612 insertions(+), 556 deletions(-)
reply other threads:[~2010-10-22 11:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201010221315.46143.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox