public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Ben Hutchings <ben@decadent.org.uk>,
	linux-kernel@vger.kernel.org, stable@kernel.org,
	David Brownell <david-b@pacbell.net>,
	akpm@linux-foundation.org, torvalds@linux-foundation.org,
	stable-review@kernel.org, alan@lxorguk.ukuu.org.uk
Subject: Re: [Stable-review] [39/45] OHCI: work around for nVidia shutdown problem
Date: Mon, 22 Nov 2010 09:55:23 -0800	[thread overview]
Message-ID: <20101122175523.GA18867@suse.de> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1011201139540.5871-100000@netrider.rowland.org>

On Sat, Nov 20, 2010 at 11:51:39AM -0500, Alan Stern wrote:
> On Sat, 20 Nov 2010, Ben Hutchings wrote:
> 
> > On Fri, 2010-11-19 at 13:43 -0800, Greg KH wrote:
> > > 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> > > 
> > > ------------------
> > > 
> > > From: Alan Stern <stern@rowland.harvard.edu>
> > > 
> > > commit 3df7169e73fc1d71a39cffeacc969f6840cdf52b upstream.
> > > 
> > > This patch (as1417) fixes a problem affecting some (or all) nVidia
> > > chipsets.  When the computer is shut down, the OHCI controllers
> > > continue to power the USB buses and evidently they drive a Reset
> > > signal out all their ports.  This prevents attached devices from going
> > > to low power.  Mouse LEDs stay on, for example, which is disconcerting
> > > for users and a drain on laptop batteries.
> > > 
> > > The fix involves leaving each OHCI controller in the OPERATIONAL state
> > > during system shutdown rather than putting it in the RESET state.
> > > Although this nominally means the controller is running, in fact it's
> > > not doing very much since all the schedules are all disabled.  However
> > > there is ongoing DMA to the Host Controller Communications Area, so
> > > the patch also disables the bus-master capability of all PCI USB
> > > controllers after the shutdown routine runs.
> > [...]
> > 
> > This last bit seems like a major change in behaviour, and this commit
> > has only just gone into the 2.6.37 cycle.  How thoroughly has this been
> > tested on other OHCI controllers?  Wouldn't it make more sense to use
> > the same quirk condition?
> 
> Ben is right; let's hold off on putting this patch into any of the 
> stable kernels.  There has been a bug report submitted against it, 
> Bugzilla #22562.

Good point, I'll go drop it.

Alan, when it all gets worked out, care to resend it to
stable@kernel.org?

thanks,

greg k-h

  reply	other threads:[~2010-11-22 18:03 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-19 21:44 [00/45] 2.6.32.26-stable review Greg KH
2010-11-19 21:42 ` Greg KH
2010-11-19 21:42 ` [01/45] staging: usbip: Notify usb core of port status changes Greg KH
2010-11-19 21:42 ` [02/45] staging: usbip: Process event flags without delay Greg KH
2010-11-19 21:42 ` [03/45] powerpc/perf: Fix sampling enable for PPC970 Greg KH
2010-11-19 21:42 ` [04/45] pcmcia: synclink_cs: fix information leak to userland Greg KH
2010-11-19 21:42 ` [05/45] sched: Fix string comparison in /proc/sched_features Greg KH
2010-11-19 21:42 ` [06/45] bluetooth: Fix missing NULL check Greg KH
2010-11-19 21:42 ` [07/45] futex: Fix errors in nested key ref-counting Greg KH
2010-11-19 21:42 ` [08/45] mm, x86: Saving vmcore with non-lazy freeing of vmas Greg KH
2010-11-20  2:16   ` [Stable-review] " Ben Hutchings
2010-11-22 17:59     ` Greg KH
2010-11-19 21:42 ` [09/45] x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit Greg KH
2010-11-19 21:42 ` [10/45] x86, kexec: Make sure to stop all CPUs before exiting the kernel Greg KH
2010-11-19 21:42 ` [11/45] x86, olpc: Dont retry EC commands forever Greg KH
2010-11-19 21:42 ` [12/45] x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs Greg KH
2010-11-19 21:42 ` [13/45] x86, intr-remap: Set redirection hint in the IRTE Greg KH
2010-11-19 21:42 ` [14/45] x86, kdump: Change copy_oldmem_page() to use cached addressing Greg KH
2010-11-19 21:42 ` [15/45] KVM: SVM: Fix wrong intercept masks on 32 bit Greg KH
2010-11-19 21:42 ` [16/45] KVM: MMU: fix direct sps access corrupted Greg KH
2010-11-19 21:42 ` [17/45] KVM: MMU: fix conflict access permissions in direct sp Greg KH
2010-11-19 21:42 ` [18/45] KVM: VMX: Fix host GDT.LIMIT corruption Greg KH
2010-11-19 21:42 ` [19/45] KVM: SVM: Adjust tsc_offset only if tsc_unstable Greg KH
2010-11-19 21:43 ` [20/45] KVM: x86: Fix SVM VMCB reset Greg KH
2010-11-19 21:43 ` [21/45] [PATCH 7/8] KVM: x86: Move TSC reset out of vmcb_init Greg KH
2010-11-19 21:43 ` [22/45] KVM: Fix fs/gs reload oops with invalid ldt Greg KH
2010-11-19 21:43 ` [23/45] pipe: fix failure to return error code on ->confirm() Greg KH
2010-11-19 21:43 ` [24/45] p54usb: fix off-by-one on !CONFIG_PM Greg KH
2010-11-19 21:43 ` [25/45] p54usb: add five more USBIDs Greg KH
2010-11-19 21:43 ` [26/45] drivers/net/wireless/p54/eeprom.c: Return -ENOMEM on memory allocation failure Greg KH
2010-11-19 21:43 ` [27/45] USB: ftdi_sio: Add PID for accesio products Greg KH
2010-11-19 21:43 ` [28/45] USB: add PID for FTDI based OpenDCC hardware Greg KH
2010-11-19 21:43 ` [29/45] USB: ftdi_sio: new VID/PIDs for various Papouch devices Greg KH
2010-11-19 21:43 ` [30/45] USB: ftdi_sio: add device ids for ScienceScope Greg KH
2010-11-19 21:43 ` [31/45] usb: musb: blackfin: call gpio_free() on error path in musb_platform_init() Greg KH
2010-11-19 21:43 ` [32/45] USB: option: Add more ZTE modem USB ids Greg KH
2010-11-19 21:43 ` [33/45] USB: cp210x: Add Renesas RX-Stick device ID Greg KH
2010-11-19 21:43 ` [34/45] USB: cp210x: Add WAGO 750-923 Service Cable " Greg KH
2010-11-19 21:43 ` [35/45] USB: atmel_usba_udc: force vbus_pin at -EINVAL when gpio_request failled Greg KH
2010-11-22  9:08   ` Nicolas Ferre
2010-11-22 21:31     ` Greg KH
2010-11-19 21:43 ` [36/45] USB: disable endpoints after unbinding interfaces, not before Greg KH
2010-11-19 21:43 ` [37/45] USB: opticon: Fix long-standing bugs in opticon driver Greg KH
2010-11-19 21:43 ` [38/45] USB: accept some invalid ep0-maxpacket values Greg KH
2010-11-19 21:43 ` [39/45] OHCI: work around for nVidia shutdown problem Greg KH
2010-11-20  2:52   ` [Stable-review] " Ben Hutchings
2010-11-20 16:51     ` Alan Stern
2010-11-22 17:55       ` Greg KH [this message]
2010-11-22 18:09         ` Alan Stern
2011-01-19 16:51         ` Alan Stern
2011-02-16 21:40           ` [stable] " Greg KH
2011-03-28 16:13   ` Andre "Osku" Schmidt
2010-11-19 21:43 ` [40/45] [SCSI] sd name space exhaustion causes system hang Greg KH
2010-11-19 21:43 ` [41/45] [SCSI] libsas: fix NCQ mixing with non-NCQ Greg KH
2010-11-19 21:43 ` [42/45] [SCSI] gdth: integer overflow in ioctl Greg KH
2010-11-19 21:43 ` [43/45] [SCSI] Fix race when removing SCSI devices Greg KH
2010-11-19 21:43 ` [44/45] [SCSI] Fix regressions in scsi_internal_device_block Greg KH
2010-11-19 21:43 ` [45/45] sgi-xp: incoming XPC channel messages can come in after the channels partition structures have been torn down Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101122175523.GA18867@suse.de \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=ben@decadent.org.uk \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox