[000/127] 2.6.32.27-stable review

[000/127] 2.6.32.27-stable review

[Greg KH]

This is the start of the stable review cycle for the 2.6.32.27 release.
There are 127 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let us know.  If anyone is a maintainer of the proper subsystem, and
wants to add a Signed-off-by: line to the patch, please respond with it.

Responses should be made by Thursday, December 9, 2010, 20:00:00 UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.32.27-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h


 MAINTAINERS                                |    6 +
 Makefile                                   |    2 +-
 arch/arm/include/asm/assembler.h           |    2 +-
 arch/arm/lib/findbit.S                     |    6 +-
 arch/microblaze/Makefile                   |    8 +-
 arch/s390/kernel/nmi.c                     |   10 +-
 arch/s390/lib/delay.c                      |   14 ++-
 arch/sparc/kernel/signal32.c               |  161 +++++++++++++---------
 arch/sparc/kernel/signal_32.c              |   55 +++++---
 arch/sparc/kernel/signal_64.c              |   45 ++++---
 arch/um/drivers/line.c                     |    5 +-
 arch/um/kernel/uml.lds.S                   |    2 +-
 arch/um/os-Linux/time.c                    |    2 +-
 arch/x86/include/asm/pgtable_32.h          |    1 +
 arch/x86/include/asm/trampoline.h          |    5 +-
 arch/x86/kernel/apic/x2apic_uv_x.c         |    9 +-
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |    1 +
 arch/x86/kernel/head_32.S                  |    8 +-
 arch/x86/kernel/quirks.c                   |    9 +-
 arch/x86/kernel/setup.c                    |    3 +
 arch/x86/kernel/smpboot.c                  |   32 ++---
 arch/x86/kernel/trampoline.c               |   17 +++
 arch/x86/kvm/vmx.c                         |   16 ++-
 arch/x86/kvm/x86.c                         |    8 +
 arch/x86/xen/enlighten.c                   |    4 -
 block/blk-map.c                            |    2 +
 block/blk-settings.c                       |    2 +-
 block/scsi_ioctl.c                         |   34 ++++--
 drivers/acpi/blacklist.c                   |    8 +
 drivers/ata/ahci.c                         |   10 ++
 drivers/ata/ata_generic.c                  |   30 ++++-
 drivers/ata/libata-scsi.c                  |    7 +-
 drivers/char/hpet.c                        |   17 +++
 drivers/char/tty_buffer.c                  |   14 ++-
 drivers/char/tty_ldisc.c                   |   58 +++++++--
 drivers/char/vt_ioctl.c                    |   11 +-
 drivers/crypto/padlock-aes.c               |    2 +-
 drivers/firewire/core-cdev.c               |   18 ++--
 drivers/firewire/core-device.c             |    1 +
 drivers/firewire/ohci.c                    |   64 +++++++--
 drivers/gpu/drm/ttm/ttm_bo_util.c          |    1 +
 drivers/hid/hidraw.c                       |   18 ++-
 drivers/hwmon/lm85.c                       |    1 +
 drivers/i2c/busses/i2c-pca-platform.c      |    2 +-
 drivers/input/serio/i8042-x86ia64io.h      |    7 +
 drivers/md/md.c                            |    4 +-
 drivers/md/raid1.c                         |    1 +
 drivers/media/video/ivtv/ivtvfb.c          |    2 +
 drivers/media/video/uvc/uvc_driver.c       |   14 ++-
 drivers/misc/sgi-xp/xpc_partition.c        |   25 ++--
 drivers/misc/sgi-xp/xpc_uv.c               |   19 ++-
 drivers/net/gianfar.c                      |    6 +-
 drivers/net/jme.c                          |   22 +++-
 drivers/pci/pci-sysfs.c                    |   22 ++-
 drivers/pci/pci.h                          |    7 +-
 drivers/pci/proc.c                         |    2 +-
 drivers/power/olpc_battery.c               |    8 +-
 drivers/ssb/b43_pci_bridge.c               |    1 +
 drivers/staging/asus_oled/asus_oled.c      |    8 +-
 drivers/staging/frontier/tranzport.c       |    2 +-
 drivers/staging/line6/control.c            |  204 ++++++++++++++--------------
 drivers/staging/line6/midi.c               |    4 +-
 drivers/staging/line6/pod.c                |   32 ++--
 drivers/staging/line6/toneport.c           |    4 +-
 drivers/staging/line6/variax.c             |   12 +-
 drivers/staging/rtl8187se/r8185b_init.c    |   30 +++-
 drivers/usb/atm/ueagle-atm.c               |    6 +-
 drivers/usb/core/devio.c                   |    7 +-
 drivers/usb/gadget/atmel_usba_udc.c        |    2 +-
 drivers/usb/host/ehci-hcd.c                |   10 +-
 drivers/usb/misc/cypress_cy7c63.c          |    6 +-
 drivers/usb/misc/iowarrior.c               |    1 +
 drivers/usb/misc/sisusbvga/sisusb.c        |    1 +
 drivers/usb/misc/trancevibrator.c          |    2 +-
 drivers/usb/misc/usbled.c                  |    2 +-
 drivers/usb/misc/usbsevseg.c               |   10 +-
 drivers/usb/serial/ftdi_sio.c              |    8 +-
 drivers/usb/serial/ftdi_sio_ids.h          |   11 ++
 drivers/usb/serial/option.c                |    2 +-
 drivers/usb/storage/sierra_ms.c            |    2 +-
 drivers/video/backlight/backlight.c        |   12 +-
 drivers/video/efifb.c                      |  106 +++++++++++++--
 drivers/video/via/accel.c                  |    7 +-
 drivers/xen/events.c                       |    2 +-
 fs/bio.c                                   |   23 +++-
 fs/ecryptfs/inode.c                        |    4 +
 fs/fuse/file.c                             |   10 ++
 include/linux/blkdev.h                     |    4 +-
 include/linux/pci_ids.h                    |    2 +
 include/linux/socket.h                     |    2 +-
 include/net/x25.h                          |    4 +
 ipc/compat.c                               |    6 +
 ipc/compat_mq.c                            |    5 +
 ipc/sem.c                                  |    2 +
 ipc/shm.c                                  |    1 +
 kernel/exit.c                              |    9 ++
 kernel/latencytop.c                        |   17 +--
 lib/percpu_counter.c                       |    1 +
 mm/filemap.c                               |    3 +
 mm/internal.h                              |    2 +-
 mm/memory_hotplug.c                        |    2 +-
 mm/mempolicy.c                             |    2 +-
 mm/mprotect.c                              |    2 +-
 mm/nommu.c                                 |    1 +
 net/can/bcm.c                              |    2 +-
 net/compat.c                               |   10 +-
 net/core/dev.c                             |    6 +-
 net/core/ethtool.c                         |    2 +-
 net/core/iovec.c                           |   20 ++--
 net/decnet/af_decnet.c                     |    2 +
 net/econet/af_econet.c                     |   29 ++---
 net/ipv4/tcp.c                             |    4 +-
 net/ipv4/udp.c                             |    4 +-
 net/irda/iriap.c                           |    3 +-
 net/irda/parameters.c                      |    4 +-
 net/netfilter/nf_conntrack_core.c          |    3 +-
 net/rds/rdma.c                             |    2 +-
 net/sched/act_gact.c                       |   21 ++--
 net/sched/act_mirred.c                     |   15 +-
 net/sched/act_nat.c                        |   35 ++---
 net/sched/act_police.c                     |   21 ++--
 net/sched/act_simple.c                     |   11 +-
 net/sched/act_skbedit.c                    |   11 +-
 net/sctp/protocol.c                        |    4 +-
 net/socket.c                               |    4 +
 net/x25/af_x25.c                           |   47 ++++++-
 net/x25/x25_facilities.c                   |   32 ++++-
 net/x25/x25_in.c                           |   17 ++-
 sound/pci/hda/patch_realtek.c              |    4 +-
 sound/pci/hda/patch_sigmatel.c             |    2 +
 sound/pci/intel8x0.c                       |    6 +
 131 files changed, 1191 insertions(+), 596 deletions(-)

[001/127] block: Ensure physical block size is unsigned int

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Martin K. Petersen <martin.petersen@oracle.com>

commit 892b6f90db81cccb723d5d92f4fddc2d68b206e1 upstream.

Physical block size was declared unsigned int to accomodate the maximum
size reported by READ CAPACITY(16).  Make sure we use the right type in
the related functions.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 block/blk-settings.c   |    2 +-
 include/linux/blkdev.h |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -352,7 +352,7 @@ EXPORT_SYMBOL(blk_queue_logical_block_si
  *   hardware can operate on without reverting to read-modify-write
  *   operations.
  */
-void blk_queue_physical_block_size(struct request_queue *q, unsigned short size)
+void blk_queue_physical_block_size(struct request_queue *q, unsigned int size)
 {
 	q->limits.physical_block_size = size;
 
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -932,7 +932,7 @@ extern void blk_queue_max_segment_size(s
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
-extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
+extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
 extern void blk_queue_alignment_offset(struct request_queue *q,
 				       unsigned int alignment);
 extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
@@ -1083,7 +1083,7 @@ static inline unsigned int queue_physica
 	return q->limits.physical_block_size;
 }
 
-static inline int bdev_physical_block_size(struct block_device *bdev)
+static inline unsigned int bdev_physical_block_size(struct block_device *bdev)
 {
 	return queue_physical_block_size(bdev_get_queue(bdev));
 }

[002/127] block: limit vec count in bio_kmalloc() and bio_alloc_map_data()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jens Axboe <jaxboe@fusionio.com>

commit f3f63c1c28bc861a931fac283b5bc3585efb8967 upstream.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/bio.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/bio.c
+++ b/fs/bio.c
@@ -371,6 +371,9 @@ struct bio *bio_kmalloc(gfp_t gfp_mask,
 {
 	struct bio *bio;
 
+	if (nr_iovecs > UIO_MAXIOV)
+		return NULL;
+
 	bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
 		      gfp_mask);
 	if (unlikely(!bio))
@@ -701,8 +704,12 @@ static void bio_free_map_data(struct bio
 static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
 					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
+	struct bio_map_data *bmd;
+
+	if (iov_count > UIO_MAXIOV)
+		return NULL;
 
+	bmd = kmalloc(sizeof(*bmd), gfp_mask);
 	if (!bmd)
 		return NULL;
 

[003/127] block: take care not to overflow when calculating total iov length

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jens Axboe <jaxboe@fusionio.com>

commit 9f864c80913467312c7b8690e41fb5ebd1b50e92 upstream.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 block/scsi_ioctl.c |   34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -319,33 +319,47 @@ static int sg_io(struct request_queue *q
 	if (hdr->iovec_count) {
 		const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
 		size_t iov_data_len;
-		struct sg_iovec *iov;
+		struct sg_iovec *sg_iov;
+		struct iovec *iov;
+		int i;
 
-		iov = kmalloc(size, GFP_KERNEL);
-		if (!iov) {
+		sg_iov = kmalloc(size, GFP_KERNEL);
+		if (!sg_iov) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		if (copy_from_user(iov, hdr->dxferp, size)) {
-			kfree(iov);
+		if (copy_from_user(sg_iov, hdr->dxferp, size)) {
+			kfree(sg_iov);
 			ret = -EFAULT;
 			goto out;
 		}
 
+		/*
+		 * Sum up the vecs, making sure they don't overflow
+		 */
+		iov = (struct iovec *) sg_iov;
+		iov_data_len = 0;
+		for (i = 0; i < hdr->iovec_count; i++) {
+			if (iov_data_len + iov[i].iov_len < iov_data_len) {
+				kfree(sg_iov);
+				ret = -EINVAL;
+				goto out;
+			}
+			iov_data_len += iov[i].iov_len;
+		}
+
 		/* SG_IO howto says that the shorter of the two wins */
-		iov_data_len = iov_length((struct iovec *)iov,
-					  hdr->iovec_count);
 		if (hdr->dxfer_len < iov_data_len) {
-			hdr->iovec_count = iov_shorten((struct iovec *)iov,
+			hdr->iovec_count = iov_shorten(iov,
 						       hdr->iovec_count,
 						       hdr->dxfer_len);
 			iov_data_len = hdr->dxfer_len;
 		}
 
-		ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
+		ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
 					  iov_data_len, GFP_KERNEL);
-		kfree(iov);
+		kfree(sg_iov);
 	} else if (hdr->dxfer_len)
 		ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
 				      GFP_KERNEL);

[004/127] block: check for proper length of iov entries in blk_rq_map_user_iov()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jens Axboe <jaxboe@fusionio.com>

commit 9284bcf4e335e5f18a8bc7b26461c33ab60d0689 upstream.

Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 block/blk-map.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -205,6 +205,8 @@ int blk_rq_map_user_iov(struct request_q
 			unaligned = 1;
 			break;
 		}
+		if (!iov[i].iov_len)
+			return -EINVAL;
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)

[005/127] jme: Fix PHY power-off error

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Guo-Fu Tseng <cooldavid@cooldavid.org>

commit c8a8684d5cfb0f110a962c93586630c0bf91ebc1 upstream.

Adding phy_on in opposition to phy_off.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/jme.c |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1578,6 +1578,16 @@ jme_free_irq(struct jme_adapter *jme)
 	}
 }
 
+static inline void
+jme_phy_on(struct jme_adapter *jme)
+{
+	u32 bmcr;
+
+	bmcr = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_BMCR);
+	bmcr &= ~BMCR_PDOWN;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, bmcr);
+}
+
 static int
 jme_open(struct net_device *netdev)
 {
@@ -1598,10 +1608,12 @@ jme_open(struct net_device *netdev)
 
 	jme_start_irq(jme);
 
-	if (test_bit(JME_FLAG_SSET, &jme->flags))
+	if (test_bit(JME_FLAG_SSET, &jme->flags)) {
+		jme_phy_on(jme);
 		jme_set_settings(netdev, &jme->old_ecmd);
-	else
+	} else {
 		jme_reset_phy_processor(jme);
+	}
 
 	jme_reset_link(jme);
 
@@ -3013,10 +3025,12 @@ jme_resume(struct pci_dev *pdev)
 	jme_clear_pm(jme);
 	pci_restore_state(pdev);
 
-	if (test_bit(JME_FLAG_SSET, &jme->flags))
+	if (test_bit(JME_FLAG_SSET, &jme->flags)) {
+		jme_phy_on(jme);
 		jme_set_settings(netdev, &jme->old_ecmd);
-	else
+	} else {
 		jme_reset_phy_processor(jme);
+	}
 
 	jme_start_irq(jme);
 	netif_device_attach(netdev);

[006/127] irda: Fix parameter extraction stack overflow

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Samuel Ortiz <samuel@sortiz.org>

commit efc463eb508798da4243625b08c7396462cabf9f upstream.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/irda/parameters.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/irda/parameters.c
+++ b/net/irda/parameters.c
@@ -298,6 +298,8 @@ static int irda_extract_string(void *sel
 
 	p.pi = pi;     /* In case handler needs to know */
 	p.pl = buf[1]; /* Extract length of value */
+	if (p.pl > 32)
+		p.pl = 32;
 
 	IRDA_DEBUG(2, "%s(), pi=%#x, pl=%d\n", __func__,
 		   p.pi, p.pl);
@@ -318,7 +320,7 @@ static int irda_extract_string(void *sel
 		   (__u8) str[0], (__u8) str[1]);
 
 	/* Null terminate string */
-	str[p.pl+1] = '\0';
+	str[p.pl] = '\0';
 
 	p.pv.c = str; /* Handler will need to take a copy */
 

[007/127] irda: Fix heap memory corruption in iriap.c

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Samuel Ortiz <samuel@sortiz.org>

commit 37f9fc452d138dfc4da2ee1ce5ae85094efc3606 upstream.

While parsing the GetValuebyClass command frame, we could potentially write
passed the skb->data pointer.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/irda/iriap.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -501,7 +501,8 @@ static void iriap_getvaluebyclass_confir
 		IRDA_DEBUG(4, "%s(), strlen=%d\n", __func__, value_len);
 
 		/* Make sure the string is null-terminated */
-		fp[n+value_len] = 0x00;
+		if (n + value_len < skb->len)
+			fp[n + value_len] = 0x00;
 		IRDA_DEBUG(4, "Got string %s\n", fp+n);
 
 		/* Will truncate to IAS_MAX_STRING bytes */

[008/127] i2c-pca-platform: Change device name of request_irq

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

commit 323584436db0cb05286425d4dfd9516fce88487f upstream.

i2c->adap.name shouldn't be used in request_irq.
Instead the driver name "i2c-pca-platform" should be used.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/i2c/busses/i2c-pca-platform.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -224,7 +224,7 @@ static int __devinit i2c_pca_pf_probe(st
 
 	if (irq) {
 		ret = request_irq(irq, i2c_pca_pf_handler,
-			IRQF_TRIGGER_FALLING, i2c->adap.name, i2c);
+			IRQF_TRIGGER_FALLING, pdev->name, i2c);
 		if (ret)
 			goto e_reqirq;
 	}

[009/127] microblaze: Fix build with make 3.82

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Thomas Backlund <tmb@mandriva.org>

commit b843e4ec01991a386a9e0e9030703524446e03da upstream.

When running make headers_install_all on x86_64 and make 3.82 I hit this:

arch/microblaze/Makefile:80: *** mixed implicit and normal rules.  Stop.
make: *** [headers_install_all] Error 2

So split the rules to satisfy make 3.82.

Signed-off-by: Thomas Backlund <tmb@mandriva.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/microblaze/Makefile |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -69,12 +69,16 @@ export MMU DTB
 
 all: linux.bin
 
-BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+# With make 3.82 we cannot mix normal and wildcard targets
+BOOT_TARGETS1 = linux.bin linux.bin.gz
+BOOT_TARGETS2 = simpleImage.%
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-$(BOOT_TARGETS): vmlinux
+$(BOOT_TARGETS1): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+$(BOOT_TARGETS2): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 define archhelp

[010/127] net: clear heap allocation for ETHTOOL_GRXCLSRLALL

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Kees Cook <kees.cook@canonical.com>

commit ae6df5f96a51818d6376da5307d773baeece4014 upstream.

Calling ETHTOOL_GRXCLSRLALL with a large rule_cnt will allocate kernel
heap without clearing it. For the one driver (niu) that implements it,
it will leave the unused portion of heap unchanged and copy the full
contents back to userspace.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/core/ethtool.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -265,7 +265,7 @@ static int ethtool_get_rxnfc(struct net_
 	if (info.cmd == ETHTOOL_GRXCLSRLALL) {
 		if (info.rule_cnt > 0) {
 			if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
-				rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+				rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
 						   GFP_USER);
 			if (!rule_buf)
 				return -ENOMEM;

[011/127] Staging: asus_oled: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 590b0b9754bd8928926bae7194b6da7ead9bda3b upstream.

They should not be writable by any user

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/asus_oled/asus_oled.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -609,13 +609,13 @@ static ssize_t class_set_picture(struct
 
 #define ASUS_OLED_DEVICE_ATTR(_file)		dev_attr_asus_oled_##_file
 
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IRUSR | S_IRUGO,
 		   get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IRUSR , NULL, set_picture);
 
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IRUSR | S_IRUGO,
 		   class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IRUSR, NULL, class_set_picture);
 
 static int asus_oled_probe(struct usb_interface *interface,
 			   const struct usb_device_id *id)

[012/127] Staging: asus_oled: fix up my fixup for some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 515b4987ccd097cdf5416530b05fdf9e01afe95a upstream.

They should be writable by root, not readable.
Doh, stupid me with the wrong flags.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/asus_oled/asus_oled.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -609,13 +609,13 @@ static ssize_t class_set_picture(struct
 
 #define ASUS_OLED_DEVICE_ATTR(_file)		dev_attr_asus_oled_##_file
 
-static DEVICE_ATTR(asus_oled_enabled, S_IRUSR | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
 		   get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IRUSR , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
 
-static DEVICE_ATTR(enabled, S_IRUSR | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
 		   class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IRUSR, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
 
 static int asus_oled_probe(struct usb_interface *interface,
 			   const struct usb_device_id *id)

[013/127] Staging: line6: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 2018845b6a169f75341f8e68ad1089cb6697cf24 and
2018845b6a169f75341f8e68ad1089cb6697cf24 upstream merged together as it
had to be backported by hand.

They should not be writable by any user

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/line6/control.c  |  204 +++++++++++++++++++--------------------
 drivers/staging/line6/midi.c     |    4 
 drivers/staging/line6/pod.c      |   32 +++---
 drivers/staging/line6/toneport.c |    4 
 drivers/staging/line6/variax.c   |   12 +-
 5 files changed, 128 insertions(+), 128 deletions(-)

--- a/drivers/staging/line6/control.c
+++ b/drivers/staging/line6/control.c
@@ -259,108 +259,108 @@ VARIAX_PARAM_R(float, mix2);
 VARIAX_PARAM_R(float, mix1);
 VARIAX_PARAM_R(int, pickup_wiring);
 
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position, pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO, pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO, pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO, pod_get_compression_threshold, pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup, pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model, pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid, pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol, pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix, pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup, pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO, pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence, pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO, pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO, pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold, pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time, pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable, pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable, pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time, pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable, pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1, pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1, pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO, pod_get_delay_param_1_note_value, pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO, pod_get_band_2_frequency__bass, pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2, pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO, pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3, pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable, pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type, pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay, pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone, pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO, pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post, pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO, pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO, pod_get_band_3_frequency__bass, pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable, pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO, pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO, pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO, pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post, pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post, pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model, pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay, pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable, pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO, pod_get_mod_param_1_note_value, pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2, pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3, pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4, pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5, pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix, pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post, pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO, pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO, pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO, pod_get_band_4_frequency__bass, pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO, pod_get_mod_param_1_double_precision, pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO, pod_get_delay_param_1_double_precision, pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable, pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO, pod_get_volume_tweak_pedal_assign, pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO, pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection, pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model, pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model, pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel, pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO, pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO, pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO, pod_get_stomp_param_1_note_value, pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2, pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3, pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4, pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5, pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6, pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO, pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4, pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5, pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post, pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model, pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO, pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb, pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb, pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model, pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume, pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off, pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO, pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage, pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain, pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain, pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain, pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO, pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain, pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO, pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position, pod_set_wah_position);
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO, pod_get_compression_gain, pod_set_compression_gain);
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO, pod_get_vol_pedal_position, pod_set_vol_pedal_position);
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO, pod_get_compression_threshold, pod_set_compression_threshold);
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup, pod_set_amp_model_setup);
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model, pod_set_amp_model);
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid, pod_set_highmid);
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol, pod_set_chan_vol);
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix, pod_set_reverb_mix);
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup, pod_set_effect_setup);
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO, pod_get_band_1_frequency, pod_set_band_1_frequency);
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence, pod_set_presence);
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO, pod_get_treble__bass, pod_set_treble__bass);
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO, pod_get_noise_gate_enable, pod_set_noise_gate_enable);
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold, pod_set_gate_threshold);
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time, pod_set_gate_decay_time);
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable, pod_set_stomp_enable);
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable, pod_set_comp_enable);
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time, pod_set_stomp_time);
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable, pod_set_delay_enable);
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1, pod_set_mod_param_1);
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1, pod_set_delay_param_1);
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_delay_param_1_note_value, pod_set_delay_param_1_note_value);
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO, pod_get_band_2_frequency__bass, pod_set_band_2_frequency__bass);
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2, pod_set_delay_param_2);
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO, pod_get_delay_volume_mix, pod_set_delay_volume_mix);
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3, pod_set_delay_param_3);
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable, pod_set_reverb_enable);
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type, pod_set_reverb_type);
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay, pod_set_reverb_decay);
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone, pod_set_reverb_tone);
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO, pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post, pod_set_reverb_pre_post);
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO, pod_get_band_2_frequency, pod_set_band_2_frequency);
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO, pod_get_band_3_frequency__bass, pod_set_band_3_frequency__bass);
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable, pod_set_wah_enable);
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO, pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO, pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO, pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post, pod_set_eq_pre_post);
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post, pod_set_volume_pre_post);
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model, pod_set_di_model);
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay, pod_set_di_delay);
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable, pod_set_mod_enable);
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_mod_param_1_note_value, pod_set_mod_param_1_note_value);
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2, pod_set_mod_param_2);
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3, pod_set_mod_param_3);
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4, pod_set_mod_param_4);
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5, pod_set_mod_param_5);
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix, pod_set_mod_volume_mix);
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post, pod_set_mod_pre_post);
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO, pod_get_modulation_model, pod_set_modulation_model);
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO, pod_get_band_3_frequency, pod_set_band_3_frequency);
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO, pod_get_band_4_frequency__bass, pod_set_band_4_frequency__bass);
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO, pod_get_mod_param_1_double_precision, pod_set_mod_param_1_double_precision);
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO, pod_get_delay_param_1_double_precision, pod_set_delay_param_1_double_precision);
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable, pod_set_eq_enable);
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO, pod_get_volume_tweak_pedal_assign, pod_set_volume_tweak_pedal_assign);
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO, pod_get_band_5_frequency, pod_set_band_5_frequency);
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection, pod_set_mic_selection);
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model, pod_set_cabinet_model);
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model, pod_set_stomp_model);
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel, pod_set_roomlevel);
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO, pod_get_band_4_frequency, pod_set_band_4_frequency);
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO, pod_get_band_6_frequency, pod_set_band_6_frequency);
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO, pod_get_stomp_param_1_note_value, pod_set_stomp_param_1_note_value);
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2, pod_set_stomp_param_2);
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3, pod_set_stomp_param_3);
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4, pod_set_stomp_param_4);
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5, pod_set_stomp_param_5);
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6, pod_set_stomp_param_6);
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO, pod_get_amp_switch_select, pod_set_amp_switch_select);
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4, pod_set_delay_param_4);
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5, pod_set_delay_param_5);
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post, pod_set_delay_pre_post);
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model, pod_set_delay_model);
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO, pod_get_delay_verb_model, pod_set_delay_verb_model);
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb, pod_set_tempo_msb);
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb, pod_set_tempo_lsb);
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model, pod_set_wah_model);
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume, pod_set_bypass_volume);
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off, pod_set_fx_loop_on_off);
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO, pod_get_tweak_param_select, pod_set_tweak_param_select);
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage, pod_set_amp1_engage);
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain, pod_set_band_1_gain);
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain, pod_set_band_2_gain);
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain, pod_set_band_3_gain);
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO, pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain, pod_set_band_4_gain);
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO, pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
 static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
 static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable, line6_nop_write);
 static DEVICE_ATTR(pickup1_type, S_IRUGO, variax_get_pickup1_type, line6_nop_write);
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -349,8 +349,8 @@ static ssize_t midi_set_midi_mask_receiv
 	return count;
 }
 
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO, midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO, midi_get_midi_mask_receive, midi_set_midi_mask_receive);
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO, midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO, midi_get_midi_mask_receive, midi_set_midi_mask_receive);
 
 /* MIDI device destructor */
 static int snd_line6_midi_free(struct snd_device *device)
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -912,33 +912,33 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1, 1);
 #undef GET_SYSTEM_PARAM
 
 /* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel, pod_set_channel);
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel, pod_set_channel);
 static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
 static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
 static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf, pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf, pod_set_dump_buf);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
 static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO, pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level, pod_set_monitor_level);
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO, pod_get_midi_postprocess, pod_set_midi_postprocess);
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level, pod_set_monitor_level);
 static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
 static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read, pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read, pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read, pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing, pod_set_routing);
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read, pod_set_retrieve_amp_setup);
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read, pod_set_retrieve_channel);
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read, pod_set_retrieve_effects_setup);
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing, pod_set_routing);
 static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read, pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read, pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read, pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq, pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute, pod_set_tuner_mute);
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read, pod_set_store_amp_setup);
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read, pod_set_store_channel);
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read, pod_set_store_effects_setup);
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq, pod_set_tuner_freq);
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute, pod_set_tuner_mute);
 static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
 static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
 
 #if CREATE_RAW_FILE
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
 #endif
 
 /*
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -117,8 +117,8 @@ static ssize_t toneport_set_led_green(st
 	return count;
 }
 
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read, toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read, toneport_set_led_green);
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read, toneport_set_led_red);
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read, toneport_set_led_green);
 
 
 static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
--- a/drivers/staging/line6/variax.c
+++ b/drivers/staging/line6/variax.c
@@ -366,17 +366,17 @@ static ssize_t variax_set_raw2(struct de
 #endif
 
 /* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model, variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume, variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model, variax_set_model);
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume, variax_set_volume);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
 static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
 static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
 static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active, variax_set_active);
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active, variax_set_active);
 
 #if CREATE_RAW_FILE
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
 #endif
 
 

[014/127] hpet: fix unwanted interrupt due to stale irq status bit

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 96e9694df446d1154ec2f4fdba8908588b9cba38 upstream.

Jaswinder Singh Rajput wrote:
> By executing Documentation/timers/hpet_example.c
>
> for polling, I requested for 3 iterations but it seems iteration work
> for only 2 as first expired time is always very small.
>
> # ./hpet_example poll /dev/hpet 10 3
> -hpet: executing poll
> hpet_poll: info.hi_flags 0x0
> hpet_poll: expired time = 0x13
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x1868c
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1
> hpet_poll: expired time = 0x18645
> hpet_poll: revents = 0x1
> hpet_poll: data 0x1

Clearing the HPET interrupt enable bit disables interrupt generation
but does not disable the timer, so the interrupt status bit will still
be set when the timer elapses.  If another interrupt arrives before
the timer has been correctly programmed (due to some other device on
the same interrupt line, or CONFIG_DEBUG_SHIRQ), this results in an
extra unwanted interrupt event because the status bit is likely to be
set from comparator matches that happened before the device was opened.

Therefore, we have to ensure that the interrupt status bit is and
stays cleared until we actually program the timer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Bob Picco <bpicco@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/hpet.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -476,6 +476,21 @@ static int hpet_ioctl_ieon(struct hpet_d
 	if (irq) {
 		unsigned long irq_flags;
 
+		if (devp->hd_flags & HPET_SHARED_IRQ) {
+			/*
+			 * To prevent the interrupt handler from seeing an
+			 * unwanted interrupt status bit, program the timer
+			 * so that it will not fire in the near future ...
+			 */
+			writel(readl(&timer->hpet_config) & ~Tn_TYPE_CNF_MASK,
+			       &timer->hpet_config);
+			write_counter(read_counter(&hpet->hpet_mc),
+				      &timer->hpet_compare);
+			/* ... and clear any left-over status. */
+			isr = 1 << (devp - devp->hd_hpets->hp_dev);
+			writel(isr, &hpet->hpet_isr);
+		}
+
 		sprintf(devp->hd_name, "hpet%d", (int)(devp - hpetp->hp_dev));
 		irq_flags = devp->hd_flags & HPET_SHARED_IRQ
 						? IRQF_SHARED : IRQF_DISABLED;

[015/127] hpet: unmap unused I/O space

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit a56d5318716d120e040294bb258901ba89fb9c90 upstream.

When the initialization code in hpet finds a memory resource and does not
find an IRQ, it does not unmap the memory resource previously mapped.

There are buggy BIOSes which report resources exactly like this and what
is worse the memory region bases point to normal RAM.  This normally would
not matter since the space is not touched.  But when PAT is turned on,
ioremap causes the page to be uncached and sets this bit in page->flags.

Then when the page is about to be used by the allocator, it is reported
as:

BUG: Bad page state in process md5sum  pfn:3ed00
page:ffffea0000dbd800 count:0 mapcount:0 mapping:(null) index:0x0
page flags: 0x20000001000000(uncached)
Pid: 7956, comm: md5sum Not tainted 2.6.34-12-desktop #1
Call Trace:
 [<ffffffff810df851>] bad_page+0xb1/0x100
 [<ffffffff810dfa45>] prep_new_page+0x1a5/0x1c0
 [<ffffffff810dfe01>] get_page_from_freelist+0x3a1/0x640
 [<ffffffff810e01af>] __alloc_pages_nodemask+0x10f/0x6b0
...

In this particular case:

1) HPET returns 3ed00000 as memory region base, but it is not in
reserved ranges reported by the BIOS (excerpt):
 BIOS-e820: 0000000000100000 - 00000000af6cf000 (usable)
 BIOS-e820: 00000000af6cf000 - 00000000afdcf000 (reserved)

2) there is no IRQ resource reported by HPET method. On the other
hand, the Intel HPET specs (1.0a) says (3.2.5.1):
_CRS (
  // Report 1K of memory consumed by this Timer Block
  memory range consumed
  // Optional: only used if BIOS allocates Interrupts [1]
  IRQs consumed
)

[1] For case where Timer Block is configured to consume IRQ0/IRQ8 AND
Legacy 8254/Legacy RTC hardware still exists, the device objects
associated with 8254 & RTC devices should not report IRQ0/IRQ8 as
"consumed resources".

So in theory we should check whether if it is the case and use those
interrupts instead.

Anyway the address reported by the BIOS here is bogus, so non-presence
of IRQ doesn't mean the "optional" part in point 2).

Since I got no reply previously, fix this by simply unmapping the space
when IRQ is not found and memory region was mapped previously.  It would
be probably more safe to walk the resources again and unmap appropriately
depending on type.  But as we now use only ioremap for both 2 memory
resource types, it is not necessarily needed right now.

Addresses https://bugzilla.novell.com/show_bug.cgi?id=629908

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/hpet.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -985,6 +985,8 @@ static int hpet_acpi_add(struct acpi_dev
 		return -ENODEV;
 
 	if (!data.hd_address || !data.hd_nirqs) {
+		if (data.hd_address)
+			iounmap(data.hd_address);
 		printk("%s: no address or irqs in _CRS\n", __func__);
 		return -ENODEV;
 	}

[016/127] olpc_battery: Fix endian neutral breakage for s16 values

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Richard A. Smith <richard@laptop.org>

commit 7cfbb29466633e6ecdc14f76a693c8478c2b22af upstream.

When the driver was updated to be endian neutral (8e9c7716c)
the signed part of the s16 values was lost.  This is because be16_to_cpu()
returns an unsigned value.  This patch casts the values back to a s16
number prior to the the implicit cast up to an int.

Signed-off-by: Richard A. Smith <richard@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index aafc1c5..5bc1dcf 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -271,14 +271,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 9760L / 32;
+		val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 15625L / 120;
+		val->intval = (s16)be16_to_cpu(ec_word) * 15625L / 120;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
@@ -299,7 +299,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 100 / 256;
+		val->intval = (s16)be16_to_cpu(ec_word) * 100 / 256;
 		break;
 	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
 		ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
@@ -313,7 +313,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 6250 / 15;
+		val->intval = (s16)be16_to_cpu(ec_word) * 6250 / 15;
 		break;
 	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);

[017/127] percpu: fix list_head init bug in __percpu_counter_init()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Masanori ITOH <itoumsn@nttdata.co.jp>

commit 8474b591faf3bb0a1e08a60d21d6baac498f15e4 upstream.

WARNING: at lib/list_debug.c:26 __list_add+0x3f/0x81()
Hardware name: Express5800/B120a [N8400-085]
list_add corruption. next->prev should be prev (ffffffff81a7ea00), but was dead000000200200. (next=ffff88080b872d58).
Modules linked in: aoe ipt_MASQUERADE iptable_nat nf_nat autofs4 sunrpc bridge 8021q garp stp llc ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_round_robin dm_multipath kvm_intel kvm uinput lpfc scsi_transport_fc igb ioatdma scsi_tgt i2c_i801 i2c_core dca iTCO_wdt iTCO_vendor_support pcspkr shpchp megaraid_sas [last unloaded: aoe]
Pid: 54, comm: events/3 Tainted: G        W  2.6.34-vanilla1 #1
Call Trace:
[<ffffffff8104bd77>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104bde6>] warn_slowpath_fmt+0x41/0x43
[<ffffffff8120fd2e>] __list_add+0x3f/0x81
[<ffffffff81212a12>] __percpu_counter_init+0x59/0x6b
[<ffffffff810d8499>] bdi_init+0x118/0x17e
[<ffffffff811f2c50>] blk_alloc_queue_node+0x79/0x143
[<ffffffff811f2d2b>] blk_alloc_queue+0x11/0x13
[<ffffffffa02a931d>] aoeblk_gdalloc+0x8e/0x1c9 [aoe]
[<ffffffffa02aa655>] aoecmd_sleepwork+0x25/0xa8 [aoe]
[<ffffffff8106186c>] worker_thread+0x1a9/0x237
[<ffffffffa02aa630>] ? aoecmd_sleepwork+0x0/0xa8 [aoe]
[<ffffffff81065827>] ? autoremove_wake_function+0x0/0x39
[<ffffffff810616c3>] ? worker_thread+0x0/0x237
[<ffffffff810653ad>] kthread+0x7f/0x87
[<ffffffff8100aa24>] kernel_thread_helper+0x4/0x10
[<ffffffff8106532e>] ? kthread+0x0/0x87
[<ffffffff8100aa20>] ? kernel_thread_helper+0x0/0x10

It's because there is no initialization code for a list_head contained in
the struct backing_dev_info under CONFIG_HOTPLUG_CPU, and the bug comes up
when block device drivers calling blk_alloc_queue() are used.  In case of
me, I got them by using aoe.

Signed-off-by: Masanori Itoh <itoumsn@nttdata.co.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 lib/percpu_counter.c |    1 +
 1 file changed, 1 insertion(+)

--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -76,6 +76,7 @@ int __percpu_counter_init(struct percpu_
 	if (!fbc->counters)
 		return -ENOMEM;
 #ifdef CONFIG_HOTPLUG_CPU
+	INIT_LIST_HEAD(&fbc->list);
 	mutex_lock(&percpu_counters_lock);
 	list_add(&fbc->list, &percpu_counters);
 	mutex_unlock(&percpu_counters_lock);

[018/127] um: remove PAGE_SIZE alignment in linker script causing kernel segfault.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 6915e04f8847bea16d0890f559694ad8eedd026c upstream.

The linker script cleanup that I did in commit 5d150a97f93 ("um: Clean up
linker script using standard macros.") (2.6.32) accidentally introduced an
ALIGN(PAGE_SIZE) when converting to use INIT_TEXT_SECTION; Richard
Weinberger reported that this causes the kernel to segfault with
CONFIG_STATIC_LINK=y.

I'm not certain why this extra alignment is a problem, but it seems likely
it is because previously

__init_begin = _stext = _text = _sinittext

and with the extra ALIGN(PAGE_SIZE), _sinittext becomes different from the
rest.  So there is likely a bug here where something is assuming that
_sinittext is the same as one of those other symbols.  But reverting the
accidental change fixes the regression, so it seems worth committing that
now.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Tested by: Antoine Martin <antoine@nagafix.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/um/kernel/uml.lds.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -22,7 +22,7 @@ SECTIONS
   _text = .;
   _stext = .;
   __init_begin = .;
-  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_TEXT_SECTION(0)
   . = ALIGN(PAGE_SIZE);
 
   .text      :

[019/127] um: fix global timer issue when using CONFIG_NO_HZ

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 482db6df1746c4fa7d64a2441d4cb2610249c679 upstream.

This fixes a issue which was introduced by fe2cc53e ("uml: track and make
up lost ticks").

timeval_to_ns() returns long long and not int.  Due to that UML's timer
did not work properlt and caused timer freezes.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/um/os-Linux/time.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -60,7 +60,7 @@ static inline long long timeval_to_ns(co
 long long disable_timer(void)
 {
 	struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
-	int remain, max = UM_NSEC_PER_SEC / UM_HZ;
+	long long remain, max = UM_NSEC_PER_SEC / UM_HZ;
 
 	if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
 		printk(UM_KERN_ERR "disable_timer - setitimer failed, "

[020/127] numa: fix slab_node(MPOL_BIND)

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Eric Dumazet <eric.dumazet@gmail.com>

commit 800416f799e0723635ac2d720ad4449917a1481c upstream.

When a node contains only HighMem memory, slab_node(MPOL_BIND)
dereferences a NULL pointer.

[ This code seems to go back all the way to commit 19770b32609b: "mm:
  filter based on a nodemask as well as a gfp_mask".  Which was back in
  April 2008, and it got merged into 2.6.26.  - Linus ]

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/mempolicy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1482,7 +1482,7 @@ unsigned slab_node(struct mempolicy *pol
 		(void)first_zones_zonelist(zonelist, highest_zoneidx,
 							&policy->v.nodes,
 							&zone);
-		return zone->node;
+		return zone ? zone->node : numa_node_id();
 	}
 
 	default:

[021/127] hwmon: (lm85) Fix ADT7468 frequency table

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jean Delvare <khali@linux-fr.org>

commit fa7a5797e57d2ed71f9a6fb44f0ae42c2d7b74b7 upstream.

The ADT7468 uses the same frequency table as the ADT7463.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/hwmon/lm85.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1286,6 +1286,7 @@ static int lm85_probe(struct i2c_client
 	switch (data->type) {
 	case adm1027:
 	case adt7463:
+	case adt7468:
 	case emc6d100:
 	case emc6d102:
 		data->freq_map = adm1027_freq_map;

[022/127] mm: fix return value of scan_lru_pages in memory unplug

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

commit f8f72ad5396987e05a42cf7eff826fb2a15ff148 upstream.

scan_lru_pages returns pfn. So, it's type should be "unsigned long"
not "int".

Note: I guess this has been work until now because memory hotplug tester's
      machine has not very big memory....
      physical address < 32bit << PAGE_SHIFT.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/memory_hotplug.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -626,7 +626,7 @@ static int test_pages_in_a_zone(unsigned
  * Scanning pfn is much easier than scanning lru list.
  * Scan pfn from start to end and Find LRU page.
  */
-int scan_lru_pages(unsigned long start, unsigned long end)
+unsigned long scan_lru_pages(unsigned long start, unsigned long end)
 {
 	unsigned long pfn;
 	struct page *page;

[023/127] mm: fix is_mem_section_removable() page_order BUG_ON check

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

commit 572438f9b52236bd8938b1647cc15e027d27ef55 upstream.

page_order() is called by memory hotplug's user interface to check the
section is removable or not.  (is_mem_section_removable())

It calls page_order() withoug holding zone->lock.
So, even if the caller does

	if (PageBuddy(page))
		ret = page_order(page) ...
The caller may hit BUG_ON().

For fixing this, there are 2 choices.
  1. add zone->lock.
  2. remove BUG_ON().

is_mem_section_removable() is used for some "advice" and doesn't need to
be 100% accurate.  This is_removable() can be called via user program..
We don't want to take this important lock for long by user's request.  So,
this patch removes BUG_ON().

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/internal.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/internal.h
+++ b/mm/internal.h
@@ -59,7 +59,7 @@ extern void prep_compound_page(struct pa
  */
 static inline unsigned long page_order(struct page *page)
 {
-	VM_BUG_ON(!PageBuddy(page));
+	/* PageBuddy() must be checked by the caller */
 	return page_private(page);
 }
 

[024/127] ahci,ata_generic: let ata_generic handle new MBP w/ MCP89

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2955 bytes --]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit c6353b4520788e34098bbf61c73fb9618ca7fdd6 upstream.

For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under
linux but the controller doesn't require explicit mode setting and
works fine with ata_generic.  Make ahci ignore the controller on MBP
7,1 and let ata_generic take it for now.

Reported in bko#15923.

  https://bugzilla.kernel.org/show_bug.cgi?id=15923

NVIDIA is investigating why ahci mode doesn't work.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ata/ahci.c        |   10 ++++++++++
 drivers/ata/ata_generic.c |    6 ++++++
 include/linux/pci_ids.h   |    1 +
 3 files changed, 17 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -3037,6 +3037,16 @@ static int ahci_init_one(struct pci_dev
 	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
 		return -ENODEV;
 
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
+	    pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
+	    pdev->subsystem_device == 0xcb89)
+		return -ENODEV;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -169,6 +169,12 @@ static struct pci_device_id ata_generic[
 	{ PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
+	  PCI_VENDOR_ID_APPLE, 0xcb89, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
 	/* Must come last. If you add entries adjust this table appropriately */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1265,6 +1265,7 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_TT128		0x9128

[025/127] ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4153 bytes --]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 1529c69adce1e95f7ae72f0441590c226bbac7fc upstream.

IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA
status register.  Make the following changes to work around the problem.

* Instead of using hard coded 1 in id->driver_data as class code
  match, use ATA_GEN_CLASS_MATCH and carry the matched id in
  host->private_data.

* Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA
  flag in id instead.

* Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
 drivers/ata/ata_generic.c |   28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,6 +32,11 @@
  *	A generic parallel ATA driver using libata
  */
 
+enum {
+	ATA_GEN_CLASS_MATCH		= (1 << 0),
+	ATA_GEN_FORCE_DMA		= (1 << 1),
+};
+
 /**
  *	generic_set_mode	-	mode setting
  *	@link: link to set up
@@ -46,13 +51,17 @@
 static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
 	struct ata_port *ap = link->ap;
+	const struct pci_device_id *id = ap->host->private_data;
 	int dma_enabled = 0;
 	struct ata_device *dev;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-	/* Bits 5 and 6 indicate if DMA is active on master/slave */
-	if (ap->ioaddr.bmdma_addr)
+	if (id->driver_data & ATA_GEN_FORCE_DMA) {
+		dma_enabled = 0xff;
+	} else if (ap->ioaddr.bmdma_addr) {
+		/* Bits 5 and 6 indicate if DMA is active on master/slave */
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
 		dma_enabled = 0xFF;
@@ -126,7 +135,7 @@ static int ata_generic_init_one(struct p
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	/* Don't use the generic entry unless instructed to do so */
-	if (id->driver_data == 1 && all_generic_ide == 0)
+	if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
 		return -ENODEV;
 
 	/* Devices that need care */
@@ -155,7 +164,7 @@ static int ata_generic_init_one(struct p
 			return rc;
 		pcim_pin_device(dev);
 	}
-	return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &generic_sht, (void *)id);
 }
 
 static struct pci_device_id ata_generic[] = {
@@ -167,18 +176,21 @@ static struct pci_device_id ata_generic[
 	{ PCI_DEVICE(PCI_VENDOR_ID_HINT,   PCI_DEVICE_ID_HINT_VXPROII_IDE), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+	  .driver_data = ATA_GEN_FORCE_DMA },
 	/*
 	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
 	 * ahci, use ata_generic instead.
 	 */
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
-	  PCI_VENDOR_ID_APPLE, 0xcb89, },
+	  PCI_VENDOR_ID_APPLE, 0xcb89,
+	  .driver_data = ATA_GEN_FORCE_DMA },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
 	/* Must come last. If you add entries adjust this table appropriately */
-	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+	  .driver_data = ATA_GEN_CLASS_MATCH },
 	{ 0, },
 };
 

[026/127] ssb: b43-pci-bridge: Add new vendor for BCM4318

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Daniel Klaffenbach <danielklaffenbach@gmail.com>

commit 1d8638d4038eb8709edc80e37a0bbb77253d86e9 upstream.

Add new vendor for Broadcom 4318.

Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ssb/b43_pci_bridge.c |    1 +
 include/linux/pci_ids.h      |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC,  0x4318) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2034,6 +2034,7 @@
 #define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
 #define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
 
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5752	0x1600
 #define PCI_DEVICE_ID_TIGON3_5752M	0x1601

[027/127] sgi-xpc: XPC fails to discover partitions with all nasids above 128

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Robin@sgi.com <Robin@sgi.com>

commit c22c7aeff69796f46ae0fcec141538e28f50b24e upstream.

UV hardware defines 256 memory protection regions versus the baseline 64
with increasing size for the SN2 ia64.  This was overlooked when XPC was
modified to accomodate both UV and SN2.

Without this patch, a user could reconfigure their existing system and
suddenly disable cross-partition communications with no indication of what
has gone wrong.  It also prevents larger configurations from using
cross-partition communication.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/sgi-xp/xpc_partition.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -433,18 +433,23 @@ xpc_discovery(void)
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-	max_regions = 64;
 	region_size = xp_region_size;
 
-	switch (region_size) {
-	case 128:
-		max_regions *= 2;
-	case 64:
-		max_regions *= 2;
-	case 32:
-		max_regions *= 2;
-		region_size = 16;
-		DBUG_ON(!is_shub2());
+	if (is_uv())
+		max_regions = 256;
+	else {
+		max_regions = 64;
+
+		switch (region_size) {
+		case 128:
+			max_regions *= 2;
+		case 64:
+			max_regions *= 2;
+		case 32:
+			max_regions *= 2;
+			region_size = 16;
+			DBUG_ON(!is_shub2());
+		}
 	}
 
 	for (region = 0; region < max_regions; region++) {

[028/127] xen: ensure that all event channels start off bound to VCPU 0

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ian Campbell <ian.campbell@citrix.com>

commit b0097adeec27e30223c989561ab0f7aa60d1fe93 upstream.

All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask
is initialised to reflect this. Otherwise there is a race after registering an
event channel but before the affinity is explicitly set where the event channel
can be delivered. If this happens then the event channel remains pending in the
L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means
the event channel cannot be reraised until another event channel happens to
trigger the same L2 entry on that VCPU.

sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and
causes only the first 32 or 64 event channels (depending on architecture) to be
initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/xen/events.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -255,7 +255,7 @@ static void init_evtchn_cpu_bindings(voi
 	}
 #endif
 
-	memset(cpu_evtchn_mask(0), ~0, sizeof(cpu_evtchn_mask(0)));
+	memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s));
 }
 
 static inline void clear_evtchn(int port)

[029/127] xen: dont bother to stop other cpus on shutdown/reboot

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

commit 31e323cca9d5c8afd372976c35a5d46192f540d1 upstream.

Xen will shoot all the VCPUs when we do a shutdown hypercall, so there's
no need to do it manually.

In any case it will fail because all the IPI irqs have been pulled
down by this point, so the cross-CPU calls will simply hang forever.

Until change 76fac077db6b34e2c6383a7b4f3f4f7b7d06d8ce the function calls
were not synchronously waited for, so this wasn't apparent.  However after
that change the calls became synchronous leading to a hang on shutdown
on multi-VCPU guests.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/xen/enlighten.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -997,10 +997,6 @@ static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
 
-#ifdef CONFIG_SMP
-	stop_other_cpus();
-#endif
-
 	if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
 		BUG();
 }

[030/127] ipc: initialize structure memory to zero for compat functions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 03145beb455cf5c20a761e8451e30b8a74ba58d9 upstream.

This takes care of leaking uninitialized kernel stack memory to
userspace from non-zeroed fields in structs in compat ipc functions.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 ipc/compat.c    |    6 ++++++
 ipc/compat_mq.c |    5 +++++
 2 files changed, 11 insertions(+)

--- a/ipc/compat.c
+++ b/ipc/compat.c
@@ -242,6 +242,8 @@ long compat_sys_semctl(int first, int se
 	struct semid64_ds __user *up64;
 	int version = compat_ipc_parse_version(&third);
 
+	memset(&s64, 0, sizeof(s64));
+
 	if (!uptr)
 		return -EINVAL;
 	if (get_user(pad, (u32 __user *) uptr))
@@ -422,6 +424,8 @@ long compat_sys_msgctl(int first, int se
 	int version = compat_ipc_parse_version(&second);
 	void __user *p;
 
+	memset(&m64, 0, sizeof(m64));
+
 	switch (second & (~IPC_64)) {
 	case IPC_INFO:
 	case IPC_RMID:
@@ -595,6 +599,8 @@ long compat_sys_shmctl(int first, int se
 	int err, err2;
 	int version = compat_ipc_parse_version(&second);
 
+	memset(&s64, 0, sizeof(s64));
+
 	switch (second & (~IPC_64)) {
 	case IPC_RMID:
 	case SHM_LOCK:
--- a/ipc/compat_mq.c
+++ b/ipc/compat_mq.c
@@ -53,6 +53,9 @@ asmlinkage long compat_sys_mq_open(const
 	void __user *p = NULL;
 	if (u_attr && oflag & O_CREAT) {
 		struct mq_attr attr;
+
+		memset(&attr, 0, sizeof(attr));
+
 		p = compat_alloc_user_space(sizeof(attr));
 		if (get_compat_mq_attr(&attr, u_attr) ||
 		    copy_to_user(p, &attr, sizeof(attr)))
@@ -127,6 +130,8 @@ asmlinkage long compat_sys_mq_getsetattr
 	struct mq_attr __user *p = compat_alloc_user_space(2 * sizeof(*p));
 	long ret;
 
+	memset(&mqstat, 0, sizeof(mqstat));
+
 	if (u_mqstat) {
 		if (get_compat_mq_attr(&mqstat, u_mqstat) ||
 		    copy_to_user(p, &mqstat, sizeof(mqstat)))

[031/127] ipc: shm: fix information leak to userland

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segooon@gmail.com>

commit 3af54c9bd9e6f14f896aac1bb0e8405ae0bc7a44 upstream.

The shmid_ds structure is copied to userland with shm_unused{,2,3}
fields unitialized.  It leads to leaking of contents of kernel stack
memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 ipc/shm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -474,6 +474,7 @@ static inline unsigned long copy_shmid_t
 	    {
 		struct shmid_ds out;
 
+		memset(&out, 0, sizeof(out));
 		ipc64_perm_to_ipc_perm(&in->shm_perm, &out.shm_perm);
 		out.shm_segsz	= in->shm_segsz;
 		out.shm_atime	= in->shm_atime;

[032/127] sys_semctl: fix kernel stack leakage

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 982f7c2b2e6a28f8f266e075d92e19c0dd4c6e56 upstream.

The semctl syscall has several code paths that lead to the leakage of
uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO,
IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete
version of the semid_ds struct.

The copy_semid_to_user() function declares a semid_ds struct on the stack
and copies it back to the user without initializing or zeroing the
"sem_base", "sem_pending", "sem_pending_last", and "undo" pointers,
allowing the leakage of 16 bytes of kernel stack memory.

The code is still reachable on 32-bit systems - when calling semctl()
newer glibc's automatically OR the IPC command with the IPC_64 flag, but
invoking the syscall directly allows users to use the older versions of
the struct.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 ipc/sem.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -560,6 +560,8 @@ static unsigned long copy_semid_to_user(
 	    {
 		struct semid_ds out;
 
+		memset(&out, 0, sizeof(out));
+
 		ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
 
 		out.sem_otime	= in->sem_otime;

[033/127] net: NETIF_F_HW_CSUM does not imply FCoE CRC offload

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ben Hutchings <bhutchings@solarflare.com>

commit 66c68bcc489fadd4f5e8839e966e3a366e50d1d5 upstream.

NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit
checksum with the checksum of an arbitrary part of the packet data,
whereas the FCoE CRC is something entirely different.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/core/dev.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1484,10 +1484,10 @@ EXPORT_SYMBOL(netif_device_attach);
 
 static bool can_checksum_protocol(unsigned long features, __be16 protocol)
 {
-	return ((features & NETIF_F_GEN_CSUM) ||
-		((features & NETIF_F_IP_CSUM) &&
+	return ((features & NETIF_F_NO_CSUM) ||
+		((features & NETIF_F_V4_CSUM) &&
 		 protocol == htons(ETH_P_IP)) ||
-		((features & NETIF_F_IPV6_CSUM) &&
+		((features & NETIF_F_V6_CSUM) &&
 		 protocol == htons(ETH_P_IPV6)) ||
 		((features & NETIF_F_FCOE_CRC) &&
 		 protocol == htons(ETH_P_FCOE)));

[034/127] drivers/char/vt_ioctl.c: fix VT_OPENQRY error value

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Graham Gower <graham.gower@gmail.com>

commit 1e0ad2881d50becaeea70ec696a80afeadf944d2 upstream.

When all VT's are in use, VT_OPENQRY casts -1 to unsigned char before
returning it to userspace as an int.  VT255 is not the next available
console.

Signed-off-by: Graham Gower <graham.gower@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/vt_ioctl.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -503,6 +503,7 @@ int vt_ioctl(struct tty_struct *tty, str
 	struct kbd_struct * kbd;
 	unsigned int console;
 	unsigned char ucval;
+	unsigned int uival;
 	void __user *up = (void __user *)arg;
 	int i, perm;
 	int ret = 0;
@@ -657,7 +658,7 @@ int vt_ioctl(struct tty_struct *tty, str
 		break;
 
 	case KDGETMODE:
-		ucval = vc->vc_mode;
+		uival = vc->vc_mode;
 		goto setint;
 
 	case KDMAPDISP:
@@ -695,7 +696,7 @@ int vt_ioctl(struct tty_struct *tty, str
 		break;
 
 	case KDGKBMODE:
-		ucval = ((kbd->kbdmode == VC_RAW) ? K_RAW :
+		uival = ((kbd->kbdmode == VC_RAW) ? K_RAW :
 				 (kbd->kbdmode == VC_MEDIUMRAW) ? K_MEDIUMRAW :
 				 (kbd->kbdmode == VC_UNICODE) ? K_UNICODE :
 				 K_XLATE);
@@ -717,9 +718,9 @@ int vt_ioctl(struct tty_struct *tty, str
 		break;
 
 	case KDGKBMETA:
-		ucval = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
+		uival = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
 	setint:
-		ret = put_user(ucval, (int __user *)arg);
+		ret = put_user(uival, (int __user *)arg);
 		break;
 
 	case KDGETKEYCODE:
@@ -949,7 +950,7 @@ int vt_ioctl(struct tty_struct *tty, str
 		for (i = 0; i < MAX_NR_CONSOLES; ++i)
 			if (! VT_IS_IN_USE(i))
 				break;
-		ucval = i < MAX_NR_CONSOLES ? (i+1) : -1;
+		uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
 		goto setint;		 
 
 	/*

[035/127] viafb: use proper register for colour when doing fill ops

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

commit efd4f6398dc92b5bf392670df862f42a19f34cf2 upstream.

The colour was written to a wrong register for fillrect operations.
This sometimes caused empty console space (for example after 'clear')
to have a different colour than desired. Fix this by writing to the
correct register.
Many thanks to Daniel Drake and Jon Nettleton for pointing out this
issue and pointing me in the right direction for the fix.

Fixes http://dev.laptop.org/ticket/9323

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/video/via/accel.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -277,11 +277,12 @@ static int hw_bitblt_2(void __iomem *eng
 		writel(tmp, engine + 0x1C);
 	}
 
-	if (op != VIA_BITBLT_COLOR)
+	if (op == VIA_BITBLT_FILL) {
+		writel(fg_color, engine + 0x58);
+	} else if (op == VIA_BITBLT_MONO) {
 		writel(fg_color, engine + 0x4C);
-
-	if (op == VIA_BITBLT_MONO)
 		writel(bg_color, engine + 0x50);
+	}
 
 	if (op == VIA_BITBLT_FILL)
 		ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001;

[036/127] eCryptfs: Clear LOOKUP_OPEN flag when creating lower file

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

commit 2e21b3f124eceb6ab5a07c8a061adce14ac94e14 upstream.

eCryptfs was passing the LOOKUP_OPEN flag through to the lower file
system, even though ecryptfs_create() doesn't support the flag. A valid
filp for the lower filesystem could be returned in the nameidata if the
lower file system's create() function supported LOOKUP_OPEN, possibly
resulting in unencrypted writes to the lower file.

However, this is only a potential problem in filesystems (FUSE, NFS,
CIFS, CEPH, 9p) that eCryptfs isn't known to support today.

https://bugs.launchpad.net/ecryptfs/+bug/641703

Reported-by: Kevin Buhr
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ecryptfs/inode.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -69,15 +69,19 @@ ecryptfs_create_underlying_file(struct i
 	struct vfsmount *lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
 	struct dentry *dentry_save;
 	struct vfsmount *vfsmount_save;
+	unsigned int flags_save;
 	int rc;
 
 	dentry_save = nd->path.dentry;
 	vfsmount_save = nd->path.mnt;
+	flags_save = nd->flags;
 	nd->path.dentry = lower_dentry;
 	nd->path.mnt = lower_mnt;
+	nd->flags &= ~LOOKUP_OPEN;
 	rc = vfs_create(lower_dir_inode, lower_dentry, mode, nd);
 	nd->path.dentry = dentry_save;
 	nd->path.mnt = vfsmount_save;
+	nd->flags = flags_save;
 	return rc;
 }
 

[037/127] md/raid1: really fix recovery looping when single good device fails.

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1227 bytes --]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: NeilBrown <neilb@suse.de>

commit 8f9e0ee38f75d4740daa9e42c8af628d33d19a02 upstream.

Commit 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 supposedly fixed a
problem where if a raid1 with just one good device gets a read-error
during recovery, the recovery would abort and immediately restart in
an infinite loop.

However it depended on raid1_remove_disk removing the spare device
from the array.  But that does not happen in this case.  So add a test
so that in the 'recovery_disabled' case, the device will be removed.

This suitable for any kernel since 2.6.29 which is when
recovery_disabled was introduced.

Reported-by: Sebastian Färber <faerber@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/raid1.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1188,6 +1188,7 @@ static int raid1_remove_disk(mddev_t *md
 		 * is not possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
+		    !mddev->recovery_disabled &&
 		    mddev->degraded < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;

[038/127] md: fix return value of rdev_size_change()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Justin Maggard <jmaggard10@gmail.com>

commit c26a44ed1e552aaa1d4ceb71842002d235fe98d7 upstream.

When trying to grow an array by enlarging component devices,
rdev_size_store() expects the return value of rdev_size_change() to be
in sectors, but the actual value is returned in KBs.

This functionality was broken by commit
     dd8ac336c13fd8afdb082ebacb1cddd5cf727889
so this patch is suitable for any kernel since 2.6.30.

Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/md.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1122,7 +1122,7 @@ super_90_rdev_size_change(mdk_rdev_t *rd
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 
@@ -1485,7 +1485,7 @@ super_1_rdev_size_change(mdk_rdev_t *rde
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 static struct super_type super_types[] = {

[039/127] x86: AMD Northbridge: Verify NBs node is online

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Prarit Bhargava <prarit@redhat.com>

commit 303fc0870f8fbfabe260c5c32b18e53458d597ea upstream.

Fix panic seen on some IBM and HP systems on 2.6.32-rc6:

 BUG: unable to handle kernel NULL pointer dereference at (null)
 IP: [<ffffffff8120bf3f>] find_next_bit+0x77/0x9c
  [...]
  [<ffffffff8120bbde>] cpumask_next_and+0x2e/0x3b
  [<ffffffff81225c62>] pci_device_probe+0x8e/0xf5
  [<ffffffff812b9be6>] ? driver_sysfs_add+0x47/0x6c
  [<ffffffff812b9da5>] driver_probe_device+0xd9/0x1f9
  [<ffffffff812b9f1d>] __driver_attach+0x58/0x7c
  [<ffffffff812b9ec5>] ? __driver_attach+0x0/0x7c
  [<ffffffff812b9298>] bus_for_each_dev+0x54/0x89
  [<ffffffff812b9b4f>] driver_attach+0x19/0x1b
  [<ffffffff812b97ae>] bus_add_driver+0xd3/0x23d
  [<ffffffff812ba1e7>] driver_register+0x98/0x109
  [<ffffffff81225ed0>] __pci_register_driver+0x63/0xd3
  [<ffffffff81072776>] ? up_read+0x26/0x2a
  [<ffffffffa0081000>] ? k8temp_init+0x0/0x20 [k8temp]
  [<ffffffffa008101e>] k8temp_init+0x1e/0x20 [k8temp]
  [<ffffffff8100a073>] do_one_initcall+0x6d/0x185
  [<ffffffff8108d765>] sys_init_module+0xd3/0x236
  [<ffffffff81011ac2>] system_call_fastpath+0x16/0x1b

I put in a printk and commented out the set_dev_node()
call when and got this output:

 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x0
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x1
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x2
 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x3

I.e. the issue appears to be that the HW has set val to a valid
value, however, the system is only configured for a single
node -- 0, the others are offline.

Check to see if the node is actually online before setting
the numa node for an AMD northbridge in quirk_amd_nb_node().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: bhavna.sarathy@amd.com
Cc: jbarnes@virtuousgeek.org
Cc: andreas.herrmann3@amd.com
LKML-Reference: <20091112180933.12532.98685.sendpatchset@prarit.bos.redhat.com>
[ v2: clean up the code and add comments ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/quirks.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -512,6 +512,7 @@ static void __init quirk_amd_nb_node(str
 {
 	struct pci_dev *nb_ht;
 	unsigned int devfn;
+	u32 node;
 	u32 val;
 
 	devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
@@ -520,7 +521,13 @@ static void __init quirk_amd_nb_node(str
 		return;
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
-	set_dev_node(&dev->dev, val & 7);
+	node = val & 7;
+	/*
+	 * Some hardware may return an invalid node ID,
+	 * so check it first:
+	 */
+	if (node_online(node))
+		set_dev_node(&dev->dev, node);
 	pci_dev_put(nb_ht);
 }
 

[040/127] tty: prevent DOS in the flush_to_ldisc

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit e045fec48970df84647a47930fcf7a22ff7229c0 upstream.

There's a small window inside the flush_to_ldisc function,
where the tty is unlocked and calling ldisc's receive_buf
function. If in this window new buffer is added to the tty,
the processing might never leave the flush_to_ldisc function.

This scenario will hog the cpu, causing other tty processing
starving, and making it impossible to interface the computer
via tty.

I was able to exploit this via pty interface by sending only
control characters to the master input, causing the flush_to_ldisc
to be scheduled, but never actually generate any output.

To reproduce, please run multiple instances of following code.

- SNIP
#define _XOPEN_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

int main(int argc, char **argv)
{
        int i, slave, master = getpt();
        char buf[8192];

        sprintf(buf, "%s", ptsname(master));
        grantpt(master);
        unlockpt(master);

        slave = open(buf, O_RDWR);
        if (slave < 0) {
                perror("open slave failed");
                return 1;
        }

        for(i = 0; i < sizeof(buf); i++)
                buf[i] = rand() % 32;

        while(1) {
                write(master, buf, sizeof(buf));
        }

        return 0;
}
- SNIP

The attached patch (based on -next tree) fixes this by checking on the
tty buffer tail. Once it's reached, the current work is rescheduled
and another could run.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/tty_buffer.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -412,7 +412,8 @@ static void flush_to_ldisc(struct work_s
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
-		struct tty_buffer *head;
+		struct tty_buffer *head, *tail = tty->buf.tail;
+		int seen_tail = 0;
 		while ((head = tty->buf.head) != NULL) {
 			int count;
 			char *char_buf;
@@ -422,6 +423,15 @@ static void flush_to_ldisc(struct work_s
 			if (!count) {
 				if (head->next == NULL)
 					break;
+				/*
+				  There's a possibility tty might get new buffer
+				  added during the unlock window below. We could
+				  end up spinning in here forever hogging the CPU
+				  completely. To avoid this let's have a rest each
+				  time we processed the tail buffer.
+				*/
+				if (tail == head)
+					seen_tail = 1;
 				tty->buf.head = head->next;
 				tty_buffer_free(tty, head);
 				continue;
@@ -431,7 +441,7 @@ static void flush_to_ldisc(struct work_s
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room) {
+			if (!tty->receive_room || seen_tail) {
 				schedule_delayed_work(&tty->buf.work, 1);
 				break;
 			}

[041/127] TTY: restore tty_ldisc_wait_idle

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit 100eeae2c5ce23b4db93ff320ee330ef1d740151 upstream.

It was removed in 65b770468e98 (tty-ldisc: turn ldisc user count into
a proper refcount), but we need to wait for last user to quit the
ldisc before we close it in tty_set_ldisc.

Otherwise weird things start to happen. There might be processes
waiting in tty_read->n_tty_read on tty->read_wait for input to appear
and at that moment, a change of ldisc is fatal. n_tty_close is called,
it frees read_buf and the waiting process is still in the middle of
reading and goes nuts after it is woken.

Previously we prevented close to happen when others are in ldisc ops
by tty_ldisc_wait_idle in tty_set_ldisc. But the commit above removed
that. So revoke the change and test whether there is 1 user (=we), and
allow the close then.

We can do that without ldisc/tty locks, because nobody else can open
the device due to TTY_LDISC_CHANGING bit set, so we in fact wait for
everybody to leave.

I don't understand why tty_ldisc_lock would be needed either when the
counter is an atomic variable, so this is a lockless
tty_ldisc_wait_idle.

On the other hand, if we fail to wait (timeout or signal), we have to
reenable the halted ldiscs, so we take ldisc lock and reuse the setup
path at the end of tty_set_ldisc.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc>
LKML-Reference: <20101031104136.GA511@Chamillionaire.breakpoint.cc>
LKML-Reference: <1287669539-22644-1-git-send-email-jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/tty_ldisc.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -45,6 +45,7 @@
 
 static DEFINE_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
@@ -81,6 +82,7 @@ static void put_ldisc(struct tty_ldisc *
 		return;
 	}
 	local_irq_restore(flags);
+	wake_up(&tty_ldisc_idle);
 }
 
 /**
@@ -522,6 +524,23 @@ static int tty_ldisc_halt(struct tty_str
 }
 
 /**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	int ret;
+	ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+	if (ret < 0)
+		return ret;
+	return ret > 0 ? 0 : -EBUSY;
+}
+
+/**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
@@ -616,7 +635,16 @@ int tty_set_ldisc(struct tty_struct *tty
 
 	flush_scheduled_work();
 
+	retval = tty_ldisc_wait_idle(tty);
+
 	mutex_lock(&tty->ldisc_mutex);
+
+	/* handle wait idle failure locked */
+	if (retval) {
+		tty_ldisc_put(new_ldisc);
+		goto enable;
+	}
+
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
 		   the ldisc data and closed the ldisc down */
@@ -649,6 +677,7 @@ int tty_set_ldisc(struct tty_struct *tty
 
 	tty_ldisc_put(o_ldisc);
 
+enable:
 	/*
 	 *	Allow ldisc referencing to occur again
 	 */

[042/127] tty_ldisc: Fix BUG() on hangup

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: =?UTF-8?q?Philippe=20R=C3=A9tornaz?= <philippe.retornaz@epfl.ch>

commit 1c95ba1e1de7edffc0c4e275e147f1a9eb1f81ae upstream.

A kernel BUG when bluetooth rfcomm connection drop while the associated
serial port is open is sometime triggered.

It seems that the line discipline can disappear between the
tty_ldisc_put and tty_ldisc_get. This patch fall back to the N_TTY line
discipline if the previous discipline is not available anymore.

Signed-off-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/tty_ldisc.c |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -722,9 +722,12 @@ static void tty_reset_termios(struct tty
  *	state closed
  */
 
-static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 {
-	struct tty_ldisc *ld;
+	struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+
+	if (IS_ERR(ld))
+		return -1;
 
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
@@ -732,10 +735,10 @@ static void tty_ldisc_reinit(struct tty_
 	/*
 	 *	Switch the line discipline back
 	 */
-	ld = tty_ldisc_get(ldisc);
-	BUG_ON(IS_ERR(ld));
 	tty_ldisc_assign(tty, ld);
 	tty_set_termios_ldisc(tty, ldisc);
+
+	return 0;
 }
 
 /**
@@ -797,13 +800,16 @@ void tty_ldisc_hangup(struct tty_struct
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
 		if (reset == 0) {
-			tty_ldisc_reinit(tty, tty->termios->c_line);
-			err = tty_ldisc_open(tty, tty->ldisc);
+
+			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+				err = tty_ldisc_open(tty, tty->ldisc);
+			else
+				err = 1;
 		}
 		/* If the re-open fails or we reset then go to N_TTY. The
 		   N_TTY open cannot fail */
 		if (reset || err) {
-			tty_ldisc_reinit(tty, N_TTY);
+			BUG_ON(tty_ldisc_reinit(tty, N_TTY));
 			WARN_ON(tty_ldisc_open(tty, tty->ldisc));
 		}
 		tty_ldisc_enable(tty);

[043/127] TTY: ldisc, fix open flag handling

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.

When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
Hardware name: System Product Name
Modules linked in: ...
Pid: 5251, comm: a.out Tainted: G        W  2.6.32-5-686 #1
Call Trace:
 [<c1030321>] ? warn_slowpath_common+0x5e/0x8a
 [<c1030357>] ? warn_slowpath_null+0xa/0xc
 [<c119311c>] ? tty_ldisc_open+0x26/0x38
 [<c11936c5>] ? tty_set_ldisc+0x218/0x304
...

So clear the bit when failing...

Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
2.6.31-rc1.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Reported-by: Sergey Lapin <slapin@ossfans.org>
Tested-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/char/tty_ldisc.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -444,9 +444,14 @@ static void tty_set_termios_ldisc(struct
 
 static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
 {
+	int ret;
+
 	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
-	if (ld->ops->open)
-		return ld->ops->open(tty);
+	if (ld->ops->open) {
+		ret = ld->ops->open(tty);
+		if (ret)
+			clear_bit(TTY_LDISC_OPEN, &tty->flags);
+	}
 	return 0;
 }
 

Re: [043/127] TTY: ldisc, fix open flag handling

[Jiri Slaby]

On 12/08/2010 01:43 AM, Greg KH wrote:
> 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> 
> ------------------
> 
> From: Jiri Slaby <jslaby@suse.cz>
> 
> commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.
> 
> When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
> TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
> WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
> Hardware name: System Product Name
> Modules linked in: ...
> Pid: 5251, comm: a.out Tainted: G        W  2.6.32-5-686 #1
> Call Trace:
>  [<c1030321>] ? warn_slowpath_common+0x5e/0x8a
>  [<c1030357>] ? warn_slowpath_null+0xa/0xc
>  [<c119311c>] ? tty_ldisc_open+0x26/0x38
>  [<c11936c5>] ? tty_set_ldisc+0x218/0x304
> ...
> 
> So clear the bit when failing...
> 
> Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
> 2.6.31-rc1.
> 
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Alan Cox <alan@linux.intel.com>
> Reported-by: Sergey Lapin <slapin@ossfans.org>
> Tested-by: Sergey Lapin <slapin@ossfans.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> 
> ---
>  drivers/char/tty_ldisc.c |    9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> --- a/drivers/char/tty_ldisc.c
> +++ b/drivers/char/tty_ldisc.c
> @@ -444,9 +444,14 @@ static void tty_set_termios_ldisc(struct
>  
>  static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
>  {
> +	int ret;
> +
>  	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
> -	if (ld->ops->open)
> -		return ld->ops->open(tty);
> +	if (ld->ops->open) {
> +		ret = ld->ops->open(tty);
> +		if (ret)
> +			clear_bit(TTY_LDISC_OPEN, &tty->flags);
> +	}
>  	return 0;

Whoops, this should write return ret; (with int ret = 0;)

Do you want me to send the patch against rebased on .32?

thanks,
-- 
js
suse labs

Re: [043/127] TTY: ldisc, fix open flag handling

[Greg KH]

On Wed, Dec 08, 2010 at 07:24:46AM +0100, Jiri Slaby wrote:
> On 12/08/2010 01:43 AM, Greg KH wrote:
> > 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> > 
> > ------------------
> > 
> > From: Jiri Slaby <jslaby@suse.cz>
> > 
> > commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.
> > 
> > When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
> > TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
> > WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
> > Hardware name: System Product Name
> > Modules linked in: ...
> > Pid: 5251, comm: a.out Tainted: G        W  2.6.32-5-686 #1
> > Call Trace:
> >  [<c1030321>] ? warn_slowpath_common+0x5e/0x8a
> >  [<c1030357>] ? warn_slowpath_null+0xa/0xc
> >  [<c119311c>] ? tty_ldisc_open+0x26/0x38
> >  [<c11936c5>] ? tty_set_ldisc+0x218/0x304
> > ...
> > 
> > So clear the bit when failing...
> > 
> > Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
> > 2.6.31-rc1.
> > 
> > Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> > Cc: Alan Cox <alan@linux.intel.com>
> > Reported-by: Sergey Lapin <slapin@ossfans.org>
> > Tested-by: Sergey Lapin <slapin@ossfans.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> > 
> > ---
> >  drivers/char/tty_ldisc.c |    9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > --- a/drivers/char/tty_ldisc.c
> > +++ b/drivers/char/tty_ldisc.c
> > @@ -444,9 +444,14 @@ static void tty_set_termios_ldisc(struct
> >  
> >  static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
> >  {
> > +	int ret;
> > +
> >  	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
> > -	if (ld->ops->open)
> > -		return ld->ops->open(tty);
> > +	if (ld->ops->open) {
> > +		ret = ld->ops->open(tty);
> > +		if (ret)
> > +			clear_bit(TTY_LDISC_OPEN, &tty->flags);
> > +	}
> >  	return 0;
> 
> Whoops, this should write return ret; (with int ret = 0;)
> 
> Do you want me to send the patch against rebased on .32?

No, send it based on Linus's tree as it's wrong there, right?  Then it
will move through to the stable kernels.

thanks,

greg k-h

Re: [043/127] TTY: ldisc, fix open flag handling

[Jiri Slaby]

On 12/08/2010 04:02 PM, Greg KH wrote:
> On Wed, Dec 08, 2010 at 07:24:46AM +0100, Jiri Slaby wrote:
>> On 12/08/2010 01:43 AM, Greg KH wrote:
>>> 2.6.32-stable review patch.  If anyone has any objections, please let us know.
>>>
>>> ------------------
>>>
>>> From: Jiri Slaby <jslaby@suse.cz>
>>>
>>> commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.
>>>
>>> When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
>>> TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
>>> WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
>>> Hardware name: System Product Name
>>> Modules linked in: ...
>>> Pid: 5251, comm: a.out Tainted: G        W  2.6.32-5-686 #1
>>> Call Trace:
>>>  [<c1030321>] ? warn_slowpath_common+0x5e/0x8a
>>>  [<c1030357>] ? warn_slowpath_null+0xa/0xc
>>>  [<c119311c>] ? tty_ldisc_open+0x26/0x38
>>>  [<c11936c5>] ? tty_set_ldisc+0x218/0x304
>>> ...
>>>
>>> So clear the bit when failing...
>>>
>>> Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
>>> 2.6.31-rc1.
>>>
>>> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
>>> Cc: Alan Cox <alan@linux.intel.com>
>>> Reported-by: Sergey Lapin <slapin@ossfans.org>
>>> Tested-by: Sergey Lapin <slapin@ossfans.org>
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
>>>
>>> ---
>>>  drivers/char/tty_ldisc.c |    9 +++++++--
>>>  1 file changed, 7 insertions(+), 2 deletions(-)
>>>
>>> --- a/drivers/char/tty_ldisc.c
>>> +++ b/drivers/char/tty_ldisc.c
>>> @@ -444,9 +444,14 @@ static void tty_set_termios_ldisc(struct
>>>  
>>>  static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
>>>  {
>>> +	int ret;
>>> +
>>>  	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
>>> -	if (ld->ops->open)
>>> -		return ld->ops->open(tty);
>>> +	if (ld->ops->open) {
>>> +		ret = ld->ops->open(tty);
>>> +		if (ret)
>>> +			clear_bit(TTY_LDISC_OPEN, &tty->flags);
>>> +	}
>>>  	return 0;
>>
>> Whoops, this should write return ret; (with int ret = 0;)
>>
>> Do you want me to send the patch against rebased on .32?
> 
> No, send it based on Linus's tree as it's wrong there, right?  Then it
> will move through to the stable kernels.

Nope, in 2.6.36 and newer it looks differently, only the .32 backport is
broken.

The .36 backport is OK:
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -454,6 +454,8 @@ static int tty_ldisc_open(struct tty_str
                 /* BTM here locks versus a hangup event */
 		WARN_ON(!tty_locked());
 		ret = ld->ops->open(tty);
+		if (ret)
+			clear_bit(TTY_LDISC_OPEN, &tty->flags);
 		return ret;
 	}
 	return 0;

thanks,
-- 
js
suse labs

Re: [043/127] TTY: ldisc, fix open flag handling

[Greg KH]

On Wed, Dec 08, 2010 at 04:09:26PM +0100, Jiri Slaby wrote:
> On 12/08/2010 04:02 PM, Greg KH wrote:
> > On Wed, Dec 08, 2010 at 07:24:46AM +0100, Jiri Slaby wrote:
> >> On 12/08/2010 01:43 AM, Greg KH wrote:
> >>> 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> >>>
> >>> ------------------
> >>>
> >>> From: Jiri Slaby <jslaby@suse.cz>
> >>>
> >>> commit 7f90cfc505d613f4faf096e0d84ffe99208057d9 upstream.
> >>>
> >>> When a concrete ldisc open fails in tty_ldisc_open, we forget to clear
> >>> TTY_LDISC_OPEN. This causes a false warning on the next ldisc open:
> >>> WARNING: at drivers/char/tty_ldisc.c:445 tty_ldisc_open+0x26/0x38()
> >>> Hardware name: System Product Name
> >>> Modules linked in: ...
> >>> Pid: 5251, comm: a.out Tainted: G        W  2.6.32-5-686 #1
> >>> Call Trace:
> >>>  [<c1030321>] ? warn_slowpath_common+0x5e/0x8a
> >>>  [<c1030357>] ? warn_slowpath_null+0xa/0xc
> >>>  [<c119311c>] ? tty_ldisc_open+0x26/0x38
> >>>  [<c11936c5>] ? tty_set_ldisc+0x218/0x304
> >>> ...
> >>>
> >>> So clear the bit when failing...
> >>>
> >>> Introduced in c65c9bc3efa (tty: rewrite the ldisc locking) back in
> >>> 2.6.31-rc1.
> >>>
> >>> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> >>> Cc: Alan Cox <alan@linux.intel.com>
> >>> Reported-by: Sergey Lapin <slapin@ossfans.org>
> >>> Tested-by: Sergey Lapin <slapin@ossfans.org>
> >>> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> >>>
> >>> ---
> >>>  drivers/char/tty_ldisc.c |    9 +++++++--
> >>>  1 file changed, 7 insertions(+), 2 deletions(-)
> >>>
> >>> --- a/drivers/char/tty_ldisc.c
> >>> +++ b/drivers/char/tty_ldisc.c
> >>> @@ -444,9 +444,14 @@ static void tty_set_termios_ldisc(struct
> >>>  
> >>>  static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
> >>>  {
> >>> +	int ret;
> >>> +
> >>>  	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
> >>> -	if (ld->ops->open)
> >>> -		return ld->ops->open(tty);
> >>> +	if (ld->ops->open) {
> >>> +		ret = ld->ops->open(tty);
> >>> +		if (ret)
> >>> +			clear_bit(TTY_LDISC_OPEN, &tty->flags);
> >>> +	}
> >>>  	return 0;
> >>
> >> Whoops, this should write return ret; (with int ret = 0;)
> >>
> >> Do you want me to send the patch against rebased on .32?
> > 
> > No, send it based on Linus's tree as it's wrong there, right?  Then it
> > will move through to the stable kernels.
> 
> Nope, in 2.6.36 and newer it looks differently, only the .32 backport is
> broken.

Ick, ok, sorry about that.  Yes, can you just send me a tiny patch that
I can merge with the .32 patch to resolve this?

thanks,

greg k-h

[044/127] KVM: VMX: fix vmx null pointer dereference on debug register access

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

There is a bug in KVM that can be used to crash a host on Intel
machines. If emulator is tricked into emulating mov to/from DR instruction
it causes NULL pointer dereference on VMX since kvm_x86_ops->(set|get)_dr
are not initialized. Recently this is not exploitable from guest
userspace, but malicious guest kernel can trigger it easily.

CVE-2010-0435

On upstream bug was fixed differently around 2.6.34.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kvm/x86.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2782,6 +2782,9 @@ int emulator_get_dr(struct x86_emulate_c
 {
 	struct kvm_vcpu *vcpu = ctxt->vcpu;
 
+	if (!kvm_x86_ops->get_dr)
+		return X86EMUL_UNHANDLEABLE;
+
 	switch (dr) {
 	case 0 ... 3:
 		*dest = kvm_x86_ops->get_dr(vcpu, dr);
@@ -2797,6 +2800,9 @@ int emulator_set_dr(struct x86_emulate_c
 	unsigned long mask = (ctxt->mode == X86EMUL_MODE_PROT64) ? ~0ULL : ~0U;
 	int exception;
 
+	if (!kvm_x86_ops->set_dr)
+		return X86EMUL_UNHANDLEABLE;
+
 	kvm_x86_ops->set_dr(ctxt->vcpu, dr, value & mask, &exception);
 	if (exception) {
 		/* FIXME: better handling */

[045/127] KVM: x86: fix information leak to userland

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: Vasiliy Kulikov <segooon@gmail.com>

commit 97e69aa62f8b5d338d6cff49be09e37cc1262838 upstream.

Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized.  It leads to leaking of contents of kernel stack
memory.  We have to initialize them to zero.

In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct.  It makes sense as these
fields are explicitly marked as padding.  No more fields need zeroing.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kvm/x86.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2102,6 +2102,7 @@ static int kvm_vm_ioctl_get_pit2(struct
 		sizeof(ps->channels));
 	ps->flags = kvm->arch.vpit->pit_state.flags;
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	memset(&ps->reserved, 0, sizeof(ps->reserved));
 	return r;
 }
 
@@ -2439,6 +2440,7 @@ long kvm_arch_vm_ioctl(struct file *filp
 		now_ns = timespec_to_ns(&now);
 		user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
 		user_ns.flags = 0;
+		memset(&user_ns.pad, 0, sizeof(user_ns.pad));
 
 		r = -EFAULT;
 		if (copy_to_user(argp, &user_ns, sizeof(user_ns)))

[046/127] KVM: VMX: Fix host userspace gsbase corruption

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit c8770e7ba63bb5dd8fe5f9d251275a8fa717fb78 upstream.

We now use load_gs_index() to load gs safely; unfortunately this also
changes MSR_KERNEL_GS_BASE, which we managed separately.  This resulted
in confusion and breakage running 32-bit host userspace on a 64-bit kernel.

Fix by
- saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs
- doing the host save/load unconditionally, instead of only when in guest
  long mode

Things can be cleaned up further, but this is the minmal fix for now.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[bwh: Backport to 2.6.32]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kvm/vmx.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -654,10 +654,7 @@ static void vmx_save_host_state(struct k
 #endif
 
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu))
-		save_msrs(vmx->host_msrs +
-			  vmx->msr_offset_kernel_gs_base, 1);
-
+	save_msrs(vmx->host_msrs + vmx->msr_offset_kernel_gs_base, 1);
 #endif
 	load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
 	load_transition_efer(vmx);
@@ -672,17 +669,26 @@ static void __vmx_load_host_state(struct
 	vmx->host_state.loaded = 0;
 	if (vmx->host_state.fs_reload_needed)
 		loadsegment(fs, vmx->host_state.fs_sel);
+#ifdef CONFIG_X86_64
+	if (is_long_mode(&vmx->vcpu))
+		save_msrs(vmx->guest_msrs + vmx->msr_offset_kernel_gs_base, 1);
+#endif
 	if (vmx->host_state.gs_ldt_reload_needed) {
 		kvm_load_ldt(vmx->host_state.ldt_sel);
 #ifdef CONFIG_X86_64
 		load_gs_index(vmx->host_state.gs_sel);
-		wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
 #else
 		loadsegment(gs, vmx->host_state.gs_sel);
 #endif
 	}
 	reload_tss();
+#ifdef CONFIG_X86_64
+	save_msrs(vmx->guest_msrs, vmx->msr_offset_kernel_gs_base);
+	save_msrs(vmx->guest_msrs + vmx->msr_offset_kernel_gs_base + 1,
+		  vmx->save_nmsrs - vmx->msr_offset_kernel_gs_base - 1);
+#else
 	save_msrs(vmx->guest_msrs, vmx->save_nmsrs);
+#endif
 	load_msrs(vmx->host_msrs, vmx->save_nmsrs);
 	reload_host_efer(vmx);
 	load_gdt(&__get_cpu_var(host_gdt));

Re: [Stable-review] [046/127] KVM: VMX: Fix host userspace gsbase corruption

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1097 bytes --]

On Tue, 2010-12-07 at 16:43 -0800, Greg KH wrote:
> 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> 
> ------------------
> 
> From: Ben Hutchings <ben@decadent.org.uk>

This should be credited primarily to Avi.

Ben.

> commit c8770e7ba63bb5dd8fe5f9d251275a8fa717fb78 upstream.
> 
> We now use load_gs_index() to load gs safely; unfortunately this also
> changes MSR_KERNEL_GS_BASE, which we managed separately.  This resulted
> in confusion and breakage running 32-bit host userspace on a 64-bit kernel.
> 
> Fix by
> - saving guest MSR_KERNEL_GS_BASE before we we reload the host's gs
> - doing the host save/load unconditionally, instead of only when in guest
>   long mode
> 
> Things can be cleaned up further, but this is the minmal fix for now.
> 
> Signed-off-by: Avi Kivity <avi@redhat.com>
> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
> [bwh: Backport to 2.6.32]
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[...]

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [Stable-review] [046/127] KVM: VMX: Fix host userspace gsbase corruption

[Greg KH]

On Wed, Dec 08, 2010 at 02:12:17AM +0000, Ben Hutchings wrote:
> On Tue, 2010-12-07 at 16:43 -0800, Greg KH wrote:
> > 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> > 
> > ------------------
> > 
> > From: Ben Hutchings <ben@decadent.org.uk>
> 
> This should be credited primarily to Avi.

He credited you, so just go with it :)

thanks,

greg k-h

[047/127] firewire: cdev: fix information leak

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 9cac00b8f0079d5d3d54ec4dae453d58dec30e7c upstream.

A userspace client got to see uninitialized stack-allocated memory if it
specified an _IOC_READ type of ioctl and an argument size larger than
expected by firewire-core's ioctl handlers (but not larger than the
core's union ioctl_arg).

Fix this by clearing the requested buffer size to zero, but only at _IOR
ioctls.  This way, there is almost no runtime penalty to legitimate
ioctls.  The only legitimate _IOR is FW_CDEV_IOC_GET_CYCLE_TIMER with 12
or 16 bytes to memset.

[Another way to fix this would be strict checking of argument size (and
possibly direction) vs. command number.  However, we then need a lookup
table, and we need to allow for slight size deviations in case of 32bit
userland on 64bit kernel.]

Reported-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
[ Backported to 2.6.32 firewire core -maks ]
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/firewire/core-cdev.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -1299,24 +1299,24 @@ static int dispatch_ioctl(struct client
 	int ret;
 
 	if (_IOC_TYPE(cmd) != '#' ||
-	    _IOC_NR(cmd) >= ARRAY_SIZE(ioctl_handlers))
+	    _IOC_NR(cmd) >= ARRAY_SIZE(ioctl_handlers) ||
+	    _IOC_SIZE(cmd) > sizeof(buffer))
 		return -EINVAL;
 
-	if (_IOC_DIR(cmd) & _IOC_WRITE) {
-		if (_IOC_SIZE(cmd) > sizeof(buffer) ||
-		    copy_from_user(buffer, arg, _IOC_SIZE(cmd)))
+	if (_IOC_DIR(cmd) == _IOC_READ)
+		memset(&buffer, 0, _IOC_SIZE(cmd));
+
+	if (_IOC_DIR(cmd) & _IOC_WRITE)
+		if (copy_from_user(buffer, arg, _IOC_SIZE(cmd)))
 			return -EFAULT;
-	}
 
 	ret = ioctl_handlers[_IOC_NR(cmd)](client, buffer);
 	if (ret < 0)
 		return ret;
 
-	if (_IOC_DIR(cmd) & _IOC_READ) {
-		if (_IOC_SIZE(cmd) > sizeof(buffer) ||
-		    copy_to_user(arg, buffer, _IOC_SIZE(cmd)))
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		if (copy_to_user(arg, buffer, _IOC_SIZE(cmd)))
 			return -EFAULT;
-	}
 
 	return ret;
 }

[048/127] firewire: core: fix an information leak

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 137d9ebfdbaa45c01f9f0f6d5121ae6f1eb942bd upstream.

If a device exposes a sparsely populated configuration ROM,
firewire-core's sysfs interface and character device file interface
showed random data in the gaps between config ROM blocks.  Fix this by
zero-initialization of the config ROM reader's scratch buffer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/firewire/core-device.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -463,6 +463,7 @@ static int read_bus_info_block(struct fw
 		return -ENOMEM;
 
 	stack = &rom[READ_BIB_ROM_SIZE];
+	memset(rom, 0, sizeof(*rom) * READ_BIB_ROM_SIZE);
 
 	device->max_speed = SCODE_100;
 

[049/127] firewire: ohci: fix buffer overflow in AR split packet handling

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 85f7ffd5d2b320f73912b15fe8cef34bae297daf upstream.

When the controller had to split a received asynchronous packet into two
buffers, the driver tries to reassemble it by copying both parts into
the first page.  However, if size + rest > PAGE_SIZE, i.e., if the yet
unhandled packets before the split packet, the split packet itself, and
any received packets after the split packet are together larger than one
page, then the memory after the first page would get overwritten.

To fix this, do not try to copy the data of all unhandled packets at
once, but copy the possibly needed data every time when handling
a packet.

This gets rid of most of the infamous crashes and data corruptions when
using firewire-net.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/firewire/ohci.c |   35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -628,7 +628,7 @@ static void ar_context_tasklet(unsigned
 	d = &ab->descriptor;
 
 	if (d->res_count == 0) {
-		size_t size, rest, offset;
+		size_t size, size2, rest, pktsize, size3, offset;
 		dma_addr_t start_bus;
 		void *start;
 
@@ -645,12 +645,41 @@ static void ar_context_tasklet(unsigned
 		ab = ab->next;
 		d = &ab->descriptor;
 		size = buffer + PAGE_SIZE - ctx->pointer;
+		/* valid buffer data in the next page */
 		rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
+		/* what actually fits in this page */
+		size2 = min(rest, (size_t)PAGE_SIZE - size);
 		memmove(buffer, ctx->pointer, size);
-		memcpy(buffer + size, ab->data, rest);
+		memcpy(buffer + size, ab->data, size2);
 		ctx->current_buffer = ab;
 		ctx->pointer = (void *) ab->data + rest;
-		end = buffer + size + rest;
+
+		while (size > 0) {
+			void *next = handle_ar_packet(ctx, buffer);
+			pktsize = next - buffer;
+			if (pktsize >= size) {
+				/*
+				 * We have handled all the data that was
+				 * originally in this page, so we can now
+				 * continue in the next page.
+				 */
+				buffer = next;
+				break;
+			}
+			/* move the next packet to the start of the buffer */
+			memmove(buffer, next, size + size2 - pktsize);
+			size -= pktsize;
+			/* fill up this page again */
+			size3 = min(rest - size2,
+				    (size_t)PAGE_SIZE - size - size2);
+			memcpy(buffer + size + size2,
+			       (void *) ab->data + size2, size3);
+			size2 += size3;
+		}
+
+		/* handle the packets that are fully in the next page */
+		buffer = (void *) ab->data + (buffer - (start + size));
+		end = (void *) ab->data + rest;
 
 		while (buffer < end)
 			buffer = handle_ar_packet(ctx, buffer);

[050/127] firewire: ohci: fix race in AR split packet handling

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit a1f805e5e73a8fe166b71c6592d3837df0cd5e2e upstream.

When handling an AR buffer that has been completely filled, we assumed
that its descriptor will not be read by the controller and can be
overwritten.  However, when the last received packet happens to end at
the end of the buffer, the controller might not yet have moved on to the
next buffer and might read the branch address later.  If we overwrite
and free the page before that, the DMA context will either go dead
because of an invalid Z value, or go off into some random memory.

To fix this, ensure that the descriptor does not get overwritten by
using only the actual buffer instead of the entire page for reassembling
the split packet.  Furthermore, to avoid freeing the page too early,
move on to the next buffer only when some data in it guarantees that the
controller has moved on.

This should eliminate the remaining firewire-net problems.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/firewire/ohci.c |   39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -639,20 +639,19 @@ static void ar_context_tasklet(unsigned
 		 */
 
 		offset = offsetof(struct ar_buffer, data);
-		start = buffer = ab;
+		start = ab;
 		start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+		buffer = ab->data;
 
 		ab = ab->next;
 		d = &ab->descriptor;
-		size = buffer + PAGE_SIZE - ctx->pointer;
+		size = start + PAGE_SIZE - ctx->pointer;
 		/* valid buffer data in the next page */
 		rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
 		/* what actually fits in this page */
-		size2 = min(rest, (size_t)PAGE_SIZE - size);
+		size2 = min(rest, (size_t)PAGE_SIZE - offset - size);
 		memmove(buffer, ctx->pointer, size);
 		memcpy(buffer + size, ab->data, size2);
-		ctx->current_buffer = ab;
-		ctx->pointer = (void *) ab->data + rest;
 
 		while (size > 0) {
 			void *next = handle_ar_packet(ctx, buffer);
@@ -671,22 +670,30 @@ static void ar_context_tasklet(unsigned
 			size -= pktsize;
 			/* fill up this page again */
 			size3 = min(rest - size2,
-				    (size_t)PAGE_SIZE - size - size2);
+				    (size_t)PAGE_SIZE - offset - size - size2);
 			memcpy(buffer + size + size2,
 			       (void *) ab->data + size2, size3);
 			size2 += size3;
 		}
 
-		/* handle the packets that are fully in the next page */
-		buffer = (void *) ab->data + (buffer - (start + size));
-		end = (void *) ab->data + rest;
-
-		while (buffer < end)
-			buffer = handle_ar_packet(ctx, buffer);
-
-		dma_free_coherent(ohci->card.device, PAGE_SIZE,
-				  start, start_bus);
-		ar_context_add_page(ctx);
+		if (rest > 0) {
+			/* handle the packets that are fully in the next page */
+			buffer = (void *) ab->data +
+					(buffer - (start + offset + size));
+			end = (void *) ab->data + rest;
+
+			while (buffer < end)
+				buffer = handle_ar_packet(ctx, buffer);
+
+			ctx->current_buffer = ab;
+			ctx->pointer = end;
+
+			dma_free_coherent(ohci->card.device, PAGE_SIZE,
+					  start, start_bus);
+			ar_context_add_page(ctx);
+		} else {
+			ctx->pointer = start + PAGE_SIZE;
+		}
 	} else {
 		buffer = ctx->pointer;
 		ctx->pointer = end =

[051/127] ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Daniel T Chen <crimsun@ubuntu.com>

commit 0613a59456980161d0cd468bae6c63d772743102 upstream.

BugLink: https://launchpad.net/bugs/669279

The original reporter states: "The Master mixer does not change the
volume from the headphone output (which is affected by the headphone
mixer). Instead it only seems to control the on-board speaker volume.
This confuses PulseAudio greatly as the Master channel is merged into
the volume mix."

Fix this symptom by applying the hp_only quirk for the reporter's SSID.
The fix is applicable to all stable kernels.

Reported-and-tested-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/pci/intel8x0.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1866,6 +1866,12 @@ static struct ac97_quirk ac97_quirks[] _
 	},
 	{
 		.subvendor = 0x1028,
+		.subdevice = 0x0182,
+		.name = "Dell Latitude D610",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
+		.subvendor = 0x1028,
 		.subdevice = 0x0186,
 		.name = "Dell Latitude D810", /* cf. Malone #41015 */
 		.type = AC97_TUNE_HP_MUTE_LED

[052/127] ALSA: HDA: Add an extra DAC for Realtek ALC887-VD

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit cc1c452e509aefc28f7ad2deed75bc69d4f915f7 upstream.

The patch enables ALC887-VD to use the DAC at nid 0x26,
which makes it possible to use this DAC for e g Headphone
volume.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/pci/hda/patch_realtek.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -17260,6 +17260,8 @@ static inline hda_nid_t alc662_mix_to_da
 		return 0x02;
 	else if (nid >= 0x0c && nid <= 0x0e)
 		return nid - 0x0c + 0x02;
+	else if (nid == 0x26) /* ALC887-VD has this DAC too */
+		return 0x25;
 	else
 		return 0;
 }
@@ -17268,7 +17270,7 @@ static inline hda_nid_t alc662_mix_to_da
 static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
 				   hda_nid_t dac)
 {
-	hda_nid_t mix[4];
+	hda_nid_t mix[5];
 	int i, num;
 
 	num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));

[053/127] ALSA: hda: Use "alienware" model quirk for another SSID

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Daniel T Chen <crimsun@ubuntu.com>

commit 0defe09ca70daccdc83abd9c3c24cd89ae6a1141 upstream.

BugLink: https://launchpad.net/bugs/683695

The original reporter states that headphone jacks do not appear to
work.  Upon inspecting his codec dump, and upon further testing, it is
confirmed that the "alienware" model quirk is correct.

Reported-and-tested-by: Cody Thierauf
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 sound/pci/hda/patch_sigmatel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1602,6 +1602,8 @@ static struct snd_pci_quirk stac92hd73xx
 static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
 		      "Alienware M17x", STAC_ALIENWARE_M17X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+		      "Alienware M17x", STAC_ALIENWARE_M17X),
 	{} /* terminator */
 };
 

[054/127] netfilter: nf_conntrack: allow nf_ct_alloc_hashtable() to get highmem pages

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Eric Dumazet <eric.dumazet@gmail.com>

commit 6b1686a71e3158d3c5f125260effce171cc7852b upstream.

commit ea781f197d6a8 (use SLAB_DESTROY_BY_RCU and get rid of call_rcu())
did a mistake in __vmalloc() call in nf_ct_alloc_hashtable().

I forgot to add __GFP_HIGHMEM, so pages were taken from LOWMEM only.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/netfilter/nf_conntrack_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1173,7 +1173,8 @@ void *nf_ct_alloc_hashtable(unsigned int
 	if (!hash) {
 		*vmalloced = 1;
 		printk(KERN_WARNING "nf_conntrack: falling back to vmalloc.\n");
-		hash = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		hash = __vmalloc(sz, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+				 PAGE_KERNEL);
 	}
 
 	if (hash && nulls)

[055/127] latencytop: fix per task accumulator

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ken Chen <kenchen@google.com>

commit 38715258aa2e8cd94bd4aafadc544e5104efd551 upstream.

Per task latencytop accumulator prematurely terminates due to erroneous
placement of latency_record_count.  It should be incremented whenever a
new record is allocated instead of increment on every latencytop event.

Also fix search iterator to only search known record events instead of
blindly searching all pre-allocated space.

Signed-off-by: Ken Chen <kenchen@google.com>
Reviewed-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 kernel/latencytop.c |   17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -195,14 +195,7 @@ __account_scheduler_latency(struct task_
 
 	account_global_scheduler_latency(tsk, &lat);
 
-	/*
-	 * short term hack; if we're > 32 we stop; future we recycle:
-	 */
-	tsk->latency_record_count++;
-	if (tsk->latency_record_count >= LT_SAVECOUNT)
-		goto out_unlock;
-
-	for (i = 0; i < LT_SAVECOUNT; i++) {
+	for (i = 0; i < tsk->latency_record_count; i++) {
 		struct latency_record *mylat;
 		int same = 1;
 
@@ -228,8 +221,14 @@ __account_scheduler_latency(struct task_
 		}
 	}
 
+	/*
+	 * short term hack; if we're > 32 we stop; future we recycle:
+	 */
+	if (tsk->latency_record_count >= LT_SAVECOUNT)
+		goto out_unlock;
+
 	/* Allocated a new one: */
-	i = tsk->latency_record_count;
+	i = tsk->latency_record_count++;
 	memcpy(&tsk->latency_record[i], &lat, sizeof(struct latency_record));
 
 out_unlock:

[056/127] mm/vfs: revalidate page->mapping in do_generic_file_read()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dave Hansen <dave@linux.vnet.ibm.com>

commit 8d056cb965b8fb7c53c564abf28b1962d1061cd3 upstream.

70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/filemap.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1030,6 +1030,9 @@ find_page:
 				goto page_not_up_to_date;
 			if (!trylock_page(page))
 				goto page_not_up_to_date;
+			/* Did it get truncated before we got the lock? */
+			if (!page->mapping)
+				goto page_not_up_to_date_locked;
 			if (!mapping->a_ops->is_partially_uptodate(page,
 								desc, offset))
 				goto page_not_up_to_date_locked;

[057/127] bio: take care not overflow page count when mapping/copying user data

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jens Axboe <jaxboe@fusionio.com>

commit cb4644cac4a2797afc847e6c92736664d4b0ea34 upstream.

If the iovec is being set up in a way that causes uaddr + PAGE_SIZE
to overflow, we could end up attempting to map a huge number of
pages. Check for this invalid input type.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/bio.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/fs/bio.c
+++ b/fs/bio.c
@@ -838,6 +838,12 @@ struct bio *bio_copy_user_iov(struct req
 		end = (uaddr + iov[i].iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		len += iov[i].iov_len;
 	}
@@ -965,6 +971,12 @@ static struct bio *__bio_map_user_iov(st
 		unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		unsigned long start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		/*
 		 * buffer must be aligned to at least hardsector size for now
@@ -992,7 +1004,7 @@ static struct bio *__bio_map_user_iov(st
 		unsigned long start = uaddr >> PAGE_SHIFT;
 		const int local_nr_pages = end - start;
 		const int page_limit = cur_page + local_nr_pages;
-		
+
 		ret = get_user_pages_fast(uaddr, local_nr_pages,
 				write_to_vm, &pages[cur_page]);
 		if (ret < local_nr_pages) {

[058/127] drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Francisco Jerez <currojerez@riseup.net>

commit 0fbecd400dd0a82d465b3086f209681e8c54cb0f upstream.

It makes sense for a BO to move after a process has requested
exclusive RW access on it (e.g. because the BO used to be located in
unmappable VRAM and we intercepted the CPU access from the fault
handler).

If we let the ghost object inherit cpu_writers from the original
object, ttm_bo_release_list() will raise a kernel BUG when the ghost
object is destroyed. This can be reproduced with the nouveau driver on
nv5x.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/gpu/drm/ttm/ttm_bo_util.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -330,6 +330,7 @@ static int ttm_buffer_object_transfer(st
 	INIT_LIST_HEAD(&fbo->lru);
 	INIT_LIST_HEAD(&fbo->swap);
 	fbo->vm_node = NULL;
+	atomic_set(&fbo->cpu_writers, 0);
 
 	fbo->sync_obj = driver->sync_obj_ref(bo->sync_obj);
 	if (fbo->mem.mm_node)

[059/127] libata-scsi passthru: fix bug which truncated LBA48 return values

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Douglas Gilbert <dgilbert@interlog.com>

commit bc496ed00ab1411d3efaf295b72e0c9eb343e1a3 upstream.

Fix assignment which overwrote SAT ATA PASS-THROUGH command EXTEND
bit setting (ATA_TFLAG_LBA48)

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Kerin Millar <kerframil@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ata/libata-scsi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2825,7 +2825,7 @@ static unsigned int ata_scsi_pass_thru(s
 	 * write indication (used for PIO/DMA setup), result TF is
 	 * copied back and we don't whine too much about its failure.
 	 */
-	tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	if (scmd->sc_data_direction == DMA_TO_DEVICE)
 		tf->flags |= ATA_TFLAG_WRITE;
 

[060/127] libata: fix NULL sdev dereference race in atapi_qc_complete()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 2a5f07b5ec098edc69e05fdd2f35d3fbb1235723 upstream.

SCSI commands may be issued between __scsi_add_device() and dev->sdev
assignment, so it's unsafe for ata_qc_complete() to dereference
dev->sdev->locked without checking whether it's NULL or not.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/ata/libata-scsi.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2497,8 +2497,11 @@ static void atapi_qc_complete(struct ata
 		 *
 		 * If door lock fails, always clear sdev->locked to
 		 * avoid this infinite loop.
+		 *
+		 * This may happen before SCSI scan is complete.  Make
+		 * sure qc->dev->sdev isn't NULL before dereferencing.
 		 */
-		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
 			qc->dev->sdev->locked = 0;
 
 		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;

[061/127] PCI: fix size checks for mmap() on /proc/bus/pci files

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Martin Wilck <martin.wilck@ts.fujitsu.com>

commit 3b519e4ea618b6943a82931630872907f9ac2c2b upstream.

The checks for valid mmaps of PCI resources made through /proc/bus/pci files
that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several
problems:

1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0,
whereas under /sys/bus/pci/devices, the start of the resource corresponds
to offset 0. This may lead to false negatives in pci_mmap_fits(), which
implicitly assumes the /sys/bus/pci/devices layout.

2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads
to false positives, because pci_mmap_fits() doesn't treat empty resources
correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT)
in this case!).

3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus
WARNINGS for the first resources that don't fit until the correct one is found.

On many controllers the first 2-4 BARs are used, and the others are empty.
In this case, an mmap attempt will first fail on the non-empty BARs
(including the "right" BAR because of 1.) and emit bogus WARNINGS because
of 3., and finally succeed on the first empty BAR because of 2.
This is certainly not the intended behaviour.

This patch addresses all 3 issues.
Updated with an enum type for the additional parameter for pci_mmap_fits().

Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/pci-sysfs.c |   22 ++++++++++++++++------
 drivers/pci/pci.h       |    7 ++++++-
 drivers/pci/proc.c      |    2 +-
 3 files changed, 23 insertions(+), 8 deletions(-)

--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -662,17 +662,21 @@ void pci_remove_legacy_files(struct pci_
 
 #ifdef HAVE_PCI_MMAP
 
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size;
+	unsigned long nr, start, size, pci_start;
 
+	if (pci_resource_len(pdev, resno) == 0)
+		return 0;
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	if (start < size && size - start >= nr)
+	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (start >= pci_start && start < pci_start + size &&
+			start + nr <= pci_start + size)
 		return 1;
-	WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
-		current->comm, start, start+nr, pci_name(pdev), resno, size);
 	return 0;
 }
 
@@ -702,8 +706,14 @@ pci_mmap_resource(struct kobject *kobj,
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
-	if (!pci_mmap_fits(pdev, i, vma))
+	if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+		WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+			"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+			pci_name(pdev), i,
+			pci_resource_start(pdev, i), pci_resource_len(pdev, i));
 		return -EINVAL;
+	}
 
 	/* pci_mmap_page_range() expects the same kind of entry as coming
 	 * from /proc/bus/pci/ which is a "user visible" value. If this is
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,8 +13,13 @@ extern int pci_create_sysfs_dev_files(st
 extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
 extern void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+	PCI_MMAP_SYSFS,	/* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+	PCI_MMAP_PROCFS	/* mmap on /proc/bus/pci/<BDF> */
+};
 extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
-			 struct vm_area_struct *vma);
+			 struct vm_area_struct *vmai,
+			 enum pci_mmap_api mmap_api);
 #endif
 int pci_probe_reset_function(struct pci_dev *dev);
 
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -259,7 +259,7 @@ static int proc_bus_pci_mmap(struct file
 
 	/* Make sure the caller is mapping a real resource for this device */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (pci_mmap_fits(dev, i, vma))
+		if (pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
 			break;
 	}
 

[062/127] PCI: fix offset check for sysfs mmapped files

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Darrick J. Wong <djwong@us.ibm.com>

commit 8c05cd08a7504b855c265263e84af61aabafa329 upstream.

I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts.
Running an strace of the X server shows that it's doing this:

open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10
mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument)

This code seems to be asking for a shared read/write mapping of 16MB worth of
BAR0 starting at file offset 0, and letting the kernel assign a starting
address.  Unfortunately, this -EINVAL causes X not to start.  Looking into
dmesg, there's a complaint like so:

process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x        96000000, size 0x         1000000)

...with the following code in pci_mmap_fits:

	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
		pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
        if (start >= pci_start && start < pci_start + size &&
                        start + nr <= pci_start + size)

It looks like the logic here is set up such that when the mmap call comes via
sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the
resource's start and end address, and the end of the vma to be no farther than
the end.  However, the sysfs PCI resource files always start at offset zero,
which means that this test always fails for programs that mmap the sysfs files.
Given the comment in the original commit
3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files
require that the file offset be equal to the resource's base address when
mmapping.

I think what we want here is for pci_start to be 0 when mmap_api ==
PCI_MMAP_PROCFS.  The following patch makes that change, after which the Matrox
and Mach64 X drivers work again.

Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/pci-sysfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -672,7 +672,7 @@ int pci_mmap_fits(struct pci_dev *pdev,
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	pci_start = (mmap_api == PCI_MMAP_SYSFS) ?
+	pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
 			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
 	if (start >= pci_start && start < pci_start + size &&
 			start + nr <= pci_start + size)

[063/127] efifb: check that the base address is plausible on pci systems

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Peter Jones <pjones@redhat.com>

commit 85a00d9bbfb4704fbf368944b1cb9fed8f1598c5 upstream.

Some Apple machines have identical DMI data but different memory
configurations for the video.  Given that, check that the address in our
table is actually within the range of a PCI BAR on a VGA device in the
machine.

This also fixes up the return value from set_system(), which has always
been wrong, but never resulted in bad behavior since there's only ever
been one matching entry in the dmi table.

The patch

1) stops people's machines from crashing when we get their display wrong,
   which seems to be unfortunately inevitable,

2) allows us to support identical dmi data with differing video memory
   configurations

This also adds me as the efifb maintainer, since I've effectively been
acting as such for quite some time.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 MAINTAINERS           |    6 ++++
 drivers/video/efifb.c |   61 ++++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 55 insertions(+), 12 deletions(-)

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1974,6 +1974,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/screen_info.h>
 #include <linux/dmi.h>
-
+#include <linux/pci.h>
 #include <video/vga.h>
 
 static struct fb_var_screeninfo efifb_defined __initdata = {
@@ -113,7 +113,7 @@ static int set_system(const struct dmi_s
 {
 	struct efifb_dmi_info *info = id->driver_data;
 	if (info->base == 0)
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
 			 "(%dx%d, stride %d)\n", id->ident,
@@ -121,18 +121,55 @@ static int set_system(const struct dmi_s
 			 info->stride);
 
 	/* Trust the bootloader over the DMI tables */
-	if (screen_info.lfb_base == 0)
+	if (screen_info.lfb_base == 0) {
+#if defined(CONFIG_PCI)
+		struct pci_dev *dev = NULL;
+		int found_bar = 0;
+#endif
 		screen_info.lfb_base = info->base;
-	if (screen_info.lfb_linelength == 0)
-		screen_info.lfb_linelength = info->stride;
-	if (screen_info.lfb_width == 0)
-		screen_info.lfb_width = info->width;
-	if (screen_info.lfb_height == 0)
-		screen_info.lfb_height = info->height;
-	if (screen_info.orig_video_isVGA == 0)
-		screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
 
-	return 0;
+#if defined(CONFIG_PCI)
+		/* make sure that the address in the table is actually on a
+		 * VGA device's PCI BAR */
+
+		for_each_pci_dev(dev) {
+			int i;
+			if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+				continue;
+			for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+				resource_size_t start, end;
+
+				start = pci_resource_start(dev, i);
+				if (start == 0)
+					break;
+				end = pci_resource_end(dev, i);
+				if (screen_info.lfb_base >= start &&
+						screen_info.lfb_base < end) {
+					found_bar = 1;
+				}
+			}
+		}
+		if (!found_bar)
+			screen_info.lfb_base = 0;
+#endif
+	}
+	if (screen_info.lfb_base) {
+		if (screen_info.lfb_linelength == 0)
+			screen_info.lfb_linelength = info->stride;
+		if (screen_info.lfb_width == 0)
+			screen_info.lfb_width = info->width;
+		if (screen_info.lfb_height == 0)
+			screen_info.lfb_height = info->height;
+		if (screen_info.orig_video_isVGA == 0)
+			screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
+	} else {
+		screen_info.lfb_linelength = 0;
+		screen_info.lfb_width = 0;
+		screen_info.lfb_height = 0;
+		screen_info.orig_video_isVGA = 0;
+		return 0;
+	}
+	return 1;
 }
 
 static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,

[064/127] USB: gadget: AT91: fix typo in atmel_usba_udc driver

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Josh Wu <josh.wu@atmel.com>

commit b48809518631880207796b4aab0fc39c2f036754 upstream.

compile fix for bug introduced by 969affff547027)

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/gadget/atmel_usba_udc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2015,7 +2015,7 @@ static int __init usba_udc_probe(struct
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-			ubc->vbus_pin = -EINVAL;
+			udc->vbus_pin = -EINVAL;
 		}
 	}
 

[065/127] USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Sebastien Bourdeauducq <sebastien@milkymist.org>

commit 7fea0f714ffb3f303d4b66933af2df2f5584c9bf upstream.

Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter
(http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/)
to the ftdi_sio driver and disable the first serial channel (used as
JTAG from userspace).

Signed-off-by: Sebastien Bourdeauducq <sebastien@milkymist.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    7 +++++++
 2 files changed, 9 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -800,6 +800,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1107,3 +1107,10 @@
 #define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
 #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
 #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+

[066/127] USB: option: fix when the driver is loaded incorrectly for some Huawei devices.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: ma rui <m00150988@huawei.com>

commit 58c0d9d70109bd7e82bdb9517007311a48499960 upstream.

When huawei datacard with PID 0x14AC is insterted into Linux system, the
present kernel will load the "option" driver to all the interfaces. But
actually, some interfaces run as other function and do not need "option"
driver.

In this path, we modify the id_tables, when the PID is 0x14ac ,VID is
0x12d1, Only when the interface's Class is 0xff,Subclass is 0xff, Pro is
0xff, it does need "option" driver.

Signed-off-by: ma rui <m00150988@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/option.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -479,7 +479,7 @@ static struct usb_device_id option_ids[]
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */

[067/127] usb: misc: sisusbvga: fix information leak to userland

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segooon@gmail.com>

commit 5dc92cf1d0b4b0debbd2e333b83f9746c103533d upstream.

Structure sisusb_info is copied to userland with "sisusb_reserved" field
uninitialized.  It leads to leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/sisusbvga/sisusb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3008,6 +3008,7 @@ sisusb_ioctl(struct file *file, unsigned
 #else
 			x.sisusb_conactive  = 0;
 #endif
+			memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
 
 			if (copy_to_user((void __user *)arg, &x, sizeof(x)))
 				retval = -EFAULT;

[068/127] usb: misc: iowarrior: fix information leak to userland

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segooon@gmail.com>

commit eca67aaeebd6e5d22b0d991af1dd0424dc703bfb upstream.

Structure iowarrior_info is copied to userland with padding byted
between "serial" and "revision" fields uninitialized.  It leads to
leaking of contents of kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/iowarrior.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -552,6 +552,7 @@ static long iowarrior_ioctl(struct file
 			/* needed for power consumption */
 			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
 
+			memset(&info, 0, sizeof(info));
 			/* directly from the descriptor */
 			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 			info.product = dev->product_id;

[069/127] usb: core: fix information leak to userland

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Vasiliy Kulikov <segooon@gmail.com>

commit 886ccd4520064408ce5876cfe00554ce52ecf4a7 upstream.

Structure usbdevfs_connectinfo is copied to userland with padding byted
after "slow" field uninitialized.  It leads to leaking of contents of
kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/core/devio.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -946,10 +946,11 @@ static int proc_getdriver(struct dev_sta
 
 static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 {
-	struct usbdevfs_connectinfo ci;
+	struct usbdevfs_connectinfo ci = {
+		.devnum = ps->dev->devnum,
+		.slow = ps->dev->speed == USB_SPEED_LOW
+	};
 
-	ci.devnum = ps->dev->devnum;
-	ci.slow = ps->dev->speed == USB_SPEED_LOW;
 	if (copy_to_user(arg, &ci, sizeof(ci)))
 		return -EFAULT;
 	return 0;

[070/127] USB: EHCI: fix obscure race in ehci_endpoint_disable

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 02e2c51ba3e80acde600721ea784c3ef84da5ea1 upstream.

This patch (as1435) fixes an obscure and unlikely race in ehci-hcd.
When an async URB is unlinked, the corresponding QH is removed from
the async list.  If the QH's endpoint is then disabled while the URB
is being given back, ehci_endpoint_disable() won't find the QH on the
async list, causing it to believe that the QH has been lost.  This
will lead to a memory leak at best and quite possibly to an oops.

The solution is to trust usbcore not to lose track of endpoints.  If
the QH isn't on the async list then it doesn't need to be taken off
the list, but the driver should still wait for the QH to become IDLE
before disabling it.

In theory this fixes Bugzilla #20182.  In fact the race is so rare
that it's not possible to tell whether the bug is still present.
However, adding delays and making other changes to force the race
seems to show that the patch works.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/host/ehci-hcd.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1008,10 +1008,11 @@ rescan:
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
 			continue;
-		/* periodic qh self-unlinks on empty */
-		if (!tmp)
-			goto nogood;
-		unlink_async (ehci, qh);
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			unlink_async(ehci, qh);
 		/* FALL THROUGH */
 	case QH_STATE_UNLINK:		/* wait for hw to finish? */
 	case QH_STATE_UNLINK_WAIT:
@@ -1028,7 +1029,6 @@ idle_timeout:
 		}
 		/* else FALL THROUGH */
 	default:
-nogood:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
 		 */

[071/127] USB: storage: sierra_ms: fix sysfs file attribute

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit d9624e75f6ad94d8a0718c1fafa89186d271a78c upstream.

A non-writable sysfs file shouldn't have writable attributes.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kevin Lloyd <klloyd@sierrawireless.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/storage/sierra_ms.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -120,7 +120,7 @@ static ssize_t show_truinst(struct devic
 	}
 	return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {

[072/127] USB: atm: ueagle-atm: fix up some permissions on the sysfs files

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit e502ac5e1eca99d7dc3f12b2a6780ccbca674858 upstream.

Some of the sysfs files had the incorrect permissions.  Some didn't make
sense at all (writable for a file that you could not write to?)

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Damien Bergamini <damien.bergamini@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/atm/ueagle-atm.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2259,7 +2259,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2322,7 +2322,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2354,7 +2354,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset) 					\
 								\

[073/127] USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit c990600d340641150f7270470a64bd99a5c0b225 upstream.

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oliver Bock <bock@tfh-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/cypress_cy7c63.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -195,11 +195,9 @@ static ssize_t get_port1_handler(struct
 	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-		   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-		   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,

[074/127] USB: misc: usbled: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 48f115470e68d443436b76b22dad63ffbffd6b97 upstream.

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/usbled.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -94,7 +94,7 @@ static ssize_t set_##value(struct device
 	change_color(led);						\
 	return count;							\
 }									\
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);

[075/127] USB: ftdi_sio: revert "USB: ftdi_sio: fix DTR/RTS line modes"

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 677aeafe19e88c282af74564048243ccabb1c590 upstream.

This reverts commit 6a1a82df91fa0eb1cc76069a9efe5714d087eccd.

RTS and DTR should not be modified based on CRTSCTS when calling
set_termios.

Modem control lines are raised at port open by the tty layer and should stay
raised regardless of whether hardware flow control is enabled or not.

This is in conformance with the way serial ports work today and many
applications depend on this behaviour to be able to talk to hardware
implementing hardware flow control (without the applications actually using
it).

Hardware which expects different behaviour on these lines can always
use TIOCMSET/TIOCMBI[SC] after port open to change them.

Reported-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Dave Mielke <dave@mielke.cc>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2365,8 +2365,6 @@ static void ftdi_set_termios(struct tty_
 				"urb failed to set to rts/cts flow control\n");
 		}
 
-		/* raise DTR/RTS */
-		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/*
 		 * Xon/Xoff code
@@ -2414,8 +2412,6 @@ static void ftdi_set_termios(struct tty_
 			}
 		}
 
-		/* lower DTR/RTS */
-		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 	return;
 }

[076/127] USB: misc: trancevibrator: fix up a sysfs attribute permission

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit d489a4b3926bad571d404ca6508f6744b9602776 upstream.

It should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sam Hocevar <sam@zoy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/trancevibrator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -85,7 +85,7 @@ static ssize_t set_speed(struct device *
 	return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
 		    const struct usb_device_id *id)

[077/127] USB: misc: usbsevseg: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit e24d7ace4e822debcb78386bf279c9aba4d7fbd1 upstream.

They should not be writable by any user.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Harrison Metzger <harrisonmetz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/misc/usbsevseg.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -185,7 +185,7 @@ static ssize_t set_attr_##name(struct de
 								\
 	return count;						\
 }								\
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -216,7 +216,7 @@ static ssize_t set_attr_text(struct devi
 	return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -265,8 +265,7 @@ static ssize_t set_attr_decimals(struct
 	return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-	show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -312,8 +311,7 @@ static ssize_t set_attr_textmode(struct
 	return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-	show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);

[078/127] USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Michael Stuermer <ms@mallorn.de>

commit 28942bb6a9dd4e2ed793675e515cfb8297ed355b upstream.

Another variant of the RT Systems programming cable for ham radios.

Signed-off-by: Michael Stuermer <ms@mallorn.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -702,6 +702,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -728,6 +728,7 @@
  */
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.

[079/127] USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jacques Viviers <jacques.viviers@gmail.com>

commit 6fdbad8021151a9e93af8159a6232c8f26415c09 upstream.

Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485
converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001.

This should also work with the stable branches for:
2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36

Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -206,6 +206,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */

[080/127] acpi-cpufreq: fix a memleak when unloading driver

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

commit dab5fff14df2cd16eb1ad4c02e83915e1063fece upstream.

We didn't free per_cpu(acfreq_data, cpu)->freq_table
when acpi_freq driver is unloaded.

Resulting in the following messages in /sys/kernel/debug/kmemleak:

unreferenced object 0xf6450e80 (size 64):
  comm "modprobe", pid 1066, jiffies 4294677317 (age 19290.453s)
  hex dump (first 32 bytes):
    00 00 00 00 e8 a2 24 00 01 00 00 00 00 9f 24 00  ......$.......$.
    02 00 00 00 00 6a 18 00 03 00 00 00 00 35 0c 00  .....j.......5..
  backtrace:
    [<c123ba97>] kmemleak_alloc+0x27/0x50
    [<c109f96f>] __kmalloc+0xcf/0x110
    [<f9da97ee>] acpi_cpufreq_cpu_init+0x1ee/0x4e4 [acpi_cpufreq]
    [<c11cd8d2>] cpufreq_add_dev+0x142/0x3a0
    [<c11920b7>] sysdev_driver_register+0x97/0x110
    [<c11cce56>] cpufreq_register_driver+0x86/0x140
    [<f9dad080>] 0xf9dad080
    [<c1001130>] do_one_initcall+0x30/0x160
    [<c10626e9>] sys_init_module+0x99/0x1e0
    [<c1002d97>] sysenter_do_call+0x12/0x26
    [<ffffffff>] 0xffffffff

https://bugzilla.kernel.org/show_bug.cgi?id=15807#c21

Tested-by: Toralf Forster <toralf.foerster@gmx.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -741,6 +741,7 @@ static int acpi_cpufreq_cpu_exit(struct
 		per_cpu(drv_data, policy->cpu) = NULL;
 		acpi_processor_unregister_performance(data->acpi_data,
 						      policy->cpu);
+		kfree(data->freq_table);
 		kfree(data);
 	}
 

[081/127] ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Len Brown <len.brown@intel.com>

commit 7a1d602f5fc35d14907b7da98d5627acb69589d1 upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=12641

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/acpi/blacklist.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -226,6 +226,14 @@ static struct dmi_system_id acpi_osi_dmi
 		},
 	},
 	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "Toshiba Satellite L355",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		     DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"),
+		},
+	},
+	{
 	.callback = dmi_disable_osi_win7,
 	.ident = "ASUS K50IJ",
 	.matches = {

[082/127] fuse: fix attributes after open(O_TRUNC)

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Ken Sumrall <ksumrall@android.com>

commit a0822c55779d9319939eac69f00bb729ea9d23da upstream.

The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall <ksumrall@android.com>
Cc: Anfei <anfei.zhou@gmail.com>
Cc: "Anand V. Avati" <avati@gluster.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/fuse/file.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -134,6 +134,7 @@ EXPORT_SYMBOL_GPL(fuse_do_open);
 void fuse_finish_open(struct inode *inode, struct file *file)
 {
 	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = get_fuse_conn(inode);
 
 	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
@@ -141,6 +142,15 @@ void fuse_finish_open(struct inode *inod
 		invalidate_inode_pages2(inode->i_mapping);
 	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
+	if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
+		struct fuse_inode *fi = get_fuse_inode(inode);
+
+		spin_lock(&fc->lock);
+		fi->attr_version = ++fc->attr_version;
+		i_size_write(inode, 0);
+		spin_unlock(&fc->lock);
+		fuse_invalidate_attr(inode);
+	}
 }
 
 int fuse_open_common(struct inode *inode, struct file *file, bool isdir)

[083/127] do_exit(): make sure that we run with get_fs() == USER_DS

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Nelson Elhage <nelhage@ksplice.com>

commit 33dd94ae1ccbfb7bf0fb6c692bc3d1c4269e6177 upstream.

If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit().  do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.

This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing.  I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.

A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.

Let's just stick it in do_exit instead.

[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 kernel/exit.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -899,6 +899,15 @@ NORET_TYPE void do_exit(long code)
 	if (unlikely(!tsk->pid))
 		panic("Attempted to kill the idle task!");
 
+	/*
+	 * If do_exit is called because this processes oopsed, it's possible
+	 * that get_fs() was left as KERNEL_DS, so reset it to USER_DS before
+	 * continuing. Amongst other possible reasons, this is to prevent
+	 * mm_release()->clear_child_tid() from writing to a user-controlled
+	 * kernel address.
+	 */
+	set_fs(USER_DS);
+
 	tracehook_report_exit(&code);
 
 	validate_creds_for_do_exit(tsk);

[084/127] uml: disable winch irq before freeing handler data

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Will Newton <will.newton@gmail.com>

commit 69e83dad5207f8f03c9699e57e1febb114383cb8 upstream.

Disable the winch irq early to make sure we don't take an interrupt part
way through the freeing of the handler data, resulting in a crash on
shutdown:

  winch_interrupt : read failed, errno = 9
  fd 13 is losing SIGWINCH support
  ------------[ cut here ]------------
  WARNING: at lib/list_debug.c:48 list_del+0xc6/0x100()
  list_del corruption, next is LIST_POISON1 (00100100)
  082578c8:  [<081fd77f>] dump_stack+0x22/0x24
  082578e0:  [<0807a18a>] warn_slowpath_common+0x5a/0x80
  08257908:  [<0807a23e>] warn_slowpath_fmt+0x2e/0x30
  08257920:  [<08172196>] list_del+0xc6/0x100
  08257940:  [<08060244>] free_winch+0x14/0x80
  08257958:  [<080606fb>] winch_interrupt+0xdb/0xe0
  08257978:  [<080a65b5>] handle_IRQ_event+0x35/0xe0
  08257998:  [<080a8717>] handle_edge_irq+0xb7/0x170
  082579bc:  [<08059bc4>] do_IRQ+0x34/0x50
  082579d4:  [<08059e1b>] sigio_handler+0x5b/0x80
  082579ec:  [<0806a374>] sig_handler_common+0x44/0xb0
  08257a68:  [<0806a538>] sig_handler+0x38/0x50
  08257a78:  [<0806a77c>] handle_signal+0x5c/0xa0
  08257a9c:  [<0806be28>] hard_handler+0x18/0x20
  08257aac:  [<00c14400>] 0xc14400

Signed-off-by: Will Newton <will.newton@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/um/drivers/line.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -727,6 +727,9 @@ struct winch {
 
 static void free_winch(struct winch *winch, int free_irq_ok)
 {
+	if (free_irq_ok)
+		free_irq(WINCH_IRQ, winch);
+
 	list_del(&winch->list);
 
 	if (winch->pid != -1)
@@ -735,8 +738,6 @@ static void free_winch(struct winch *win
 		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
 	kfree(winch);
 }
 

[085/127] backlight: grab ops_lock before testing bd->ops

[Greg KH]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1951 bytes --]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>

commit d1d73578e053b981c3611e5a211534290d24a5eb upstream.

According to the comment describing ops_lock in the definition of struct
backlight_device and when comparing with other functions in backlight.c
the mutex must be hold when checking ops to be non-NULL.

Fixes a problem added by c835ee7f4154992e6 ("backlight: Add suspend/resume
support to the backlight core") in Jan 2009.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/video/backlight/backlight.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -196,12 +196,12 @@ static int backlight_suspend(struct devi
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state |= BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
@@ -210,12 +210,12 @@ static int backlight_resume(struct devic
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state &= ~BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }

[086/127] nommu: yield CPU while disposing VM

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Steven J. Magnani <steve@digidescorp.com>

commit 04c3496152394d17e3bc2316f9731ee3e8a026bc upstream.

Depending on processor speed, page size, and the amount of memory a
process is allowed to amass, cleanup of a large VM may freeze the system
for many seconds.  This can result in a watchdog timeout.

Make sure other tasks receive some service when cleaning up large VMs.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/nommu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1615,6 +1615,7 @@ void exit_mmap(struct mm_struct *mm)
 		mm->mmap = vma->vm_next;
 		delete_vma_from_mm(vma);
 		delete_vma(mm, vma);
+		cond_resched();
 	}
 
 	kleave("");

[087/127] DECnet: dont leak uninitialized stack byte

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 3c6f27bf33052ea6ba9d82369fb460726fb779c0 upstream.

A single uninitialized padding byte is leaked to userspace.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/decnet/af_decnet.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1555,6 +1555,8 @@ static int __dn_getsockopt(struct socket
 			if (r_len > sizeof(struct linkinfo_dn))
 				r_len = sizeof(struct linkinfo_dn);
 
+			memset(&link, 0, sizeof(link));
+
 			switch(sock->state) {
 				case SS_CONNECTING:
 					link.idn_linkstate = LL_CONNECTING;

[088/127] perf_events: Fix perf_counter_mmap() hook in mprotect()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Pekka Enberg <penberg@kernel.org>

commit 63bfd7384b119409685a17d5c58f0b56e5dc03da upstream.

As pointed out by Linus, commit dab5855 ("perf_counter: Add mmap event hooks to
mprotect()") is fundamentally wrong as mprotect_fixup() can free 'vma' due to
merging. Fix the problem by moving perf_event_mmap() hook to
mprotect_fixup().

Note: there's another successful return path from mprotect_fixup() if old
flags equal to new flags. We don't, however, need to call
perf_event_mmap() there because 'perf' already knows the VMA is
executable.

Reported-by: Dave Jones <davej@redhat.com>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 mm/mprotect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -212,6 +212,7 @@ success:
 	mmu_notifier_invalidate_range_end(mm, start, end);
 	vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
 	vm_stat_account(mm, newflags, vma->vm_file, nrpages);
+	perf_event_mmap(vma);
 	return 0;
 
 fail:
@@ -300,7 +301,6 @@ SYSCALL_DEFINE3(mprotect, unsigned long,
 		error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
 		if (error)
 			goto out;
-		perf_event_mmap(vma);
 		nstart = tmp;
 
 		if (nstart < prev->vm_end)

[089/127] ARM: 6489/1: thumb2: fix incorrect optimisation in usracc

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 1142b71d85894dcff1466dd6c871ea3c89e0352c upstream.

Commit 8b592783 added a Thumb-2 variant of usracc which, when it is
called with \rept=2, calls usraccoff once with an offset of 0 and
secondly with a hard-coded offset of 4 in order to avoid incrementing
the pointer again. If \inc != 4 then we will store the data to the wrong
offset from \ptr. Luckily, the only caller that passes \rept=2 to this
function is __clear_user so we haven't been actively corrupting user data.

This patch fixes usracc to pass \inc instead of #4 to usraccoff
when it is called a second time.

Reported-by: Tony Thompson <tony.thompson@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/include/asm/assembler.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -215,7 +215,7 @@
 	@ Slightly optimised to avoid incrementing the pointer twice
 	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
 	.endif
 
 	add\cond \ptr, #\rept * \inc

[090/127] ARM: 6482/2: Fix find_next_zero_bit and related assembly

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: James Jones <jajones@nvidia.com>

commit 0e91ec0c06d2cd15071a6021c94840a50e6671aa upstream.

The find_next_bit, find_first_bit, find_next_zero_bit
and find_first_zero_bit functions were not properly
clamping to the maxbit argument at the bit level. They
were instead only checking maxbit at the byte level.
To fix this, add a compare and a conditional move
instruction to the end of the common bit-within-the-
byte code used by all the functions and be sure not to
clobber the maxbit argument before it is used.

Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/arm/lib/findbit.S |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
  */
 .L_found:
 #if __LINUX_ARM_ARCH__ >= 5
-		rsb	r1, r3, #0
-		and	r3, r3, r1
+		rsb	r0, r3, #0
+		and	r3, r3, r0
 		clz	r3, r3
 		rsb	r3, r3, #31
 		add	r0, r2, r3
@@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
+		cmp	r1, r0			@ Clamp to maxbit
+		movlo	r0, r1
 		mov	pc, lr
 

[091/127] Staging: frontier: fix up some sysfs attribute permissions

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <gregkh@suse.de>

commit 3bad28ec006ad6ab2bca4e5103860b75391e3c9d and
2a767fda5d0d8dcff465724dfad6ee131489b3f2 upstream merged together.

They should not be writable by any user

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Taht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/frontier/tranzport.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -202,7 +202,7 @@ static void usb_tranzport_abort_transfer
     t->value = temp;							\
     return count;							\
   }									\
-  static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+  static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
 
 show_int(enable);
 show_int(offline);

[092/127] staging: rtl8187se: Change panic to warn when RF switch turned off

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit f36d83a8cb7224f45fdfa1129a616dff56479a09 upstream.

This driver issues a kernel panic over conditions that do not
justify such drastic action. Change these to log entries with
a stack dump.

This patch fixes the system crash reported in
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674285.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-Tested-by: Robie Basik <rb-oss-3@justgohome.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/staging/rtl8187se/r8185b_init.c |   32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -356,8 +356,12 @@ HwHSSIThreeWire(
 			}
 			udelay(10);
 		}
-		if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
-			panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+		if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+			printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+			       " %#X RE|WE bits are not clear!!\n", u1bTmp);
+			dump_stack();
+			return 0;
+		}
 
 		// RTL8187S HSSI Read/Write Function
 		u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
@@ -397,13 +401,23 @@ HwHSSIThreeWire(
 				int idx;
 				int ByteCnt = nDataBufBitCnt / 8;
                                 //printk("%d\n",nDataBufBitCnt);
-				if ((nDataBufBitCnt % 8) != 0)
-				panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
-				nDataBufBitCnt);
-
-			       if (nDataBufBitCnt > 64)
-				panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
-				nDataBufBitCnt);
+				if ((nDataBufBitCnt % 8) != 0) {
+					printk(KERN_ERR "rtl8187se: "
+					       "HwThreeWire(): nDataBufBitCnt(%d)"
+					       " should be multiple of 8!!!\n",
+					       nDataBufBitCnt);
+					dump_stack();
+					nDataBufBitCnt += 8;
+					nDataBufBitCnt &= ~7;
+				}
+
+			       if (nDataBufBitCnt > 64) {
+					printk(KERN_ERR "rtl8187se: HwThreeWire():"
+					       " nDataBufBitCnt(%d) should <= 64!!!\n",
+					       nDataBufBitCnt);
+					dump_stack();
+					nDataBufBitCnt = 64;
+				}
 
 				for(idx = 0; idx < ByteCnt; idx++)
 				{

[093/127] net sched: fix kernel leak in act_police

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit 0f04cfd098fb81fded74e78ea1a1b86cc6c6c31e upstream.

While reviewing commit 1c40be12f7d8ca1d387510d39787b12e512a7ce8, I
 audited other users of tc_action_ops->dump for information leaks.

 That commit covered almost all of them but act_police still had a leak.

 opt.limit and opt.capab aren't zeroed out before the structure is
 passed out.

 This patch uses the C99 initializers to zero everything unused out.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sched/act_police.c |   19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -340,22 +340,19 @@ tcf_act_police_dump(struct sk_buff *skb,
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_police *police = a->priv;
-	struct tc_police opt;
+	struct tc_police opt = {
+		.index = police->tcf_index,
+		.action = police->tcf_action,
+		.mtu = police->tcfp_mtu,
+		.burst = police->tcfp_burst,
+		.refcnt = police->tcf_refcnt - ref,
+		.bindcnt = police->tcf_bindcnt - bind,
+	};
 
-	opt.index = police->tcf_index;
-	opt.action = police->tcf_action;
-	opt.mtu = police->tcfp_mtu;
-	opt.burst = police->tcfp_burst;
-	opt.refcnt = police->tcf_refcnt - ref;
-	opt.bindcnt = police->tcf_bindcnt - bind;
 	if (police->tcfp_R_tab)
 		opt.rate = police->tcfp_R_tab->rate;
-	else
-		memset(&opt.rate, 0, sizeof(opt.rate));
 	if (police->tcfp_P_tab)
 		opt.peakrate = police->tcfp_P_tab->rate;
-	else
-		memset(&opt.peakrate, 0, sizeof(opt.peakrate));
 	NLA_PUT(skb, TCA_POLICE_TBF, sizeof(opt), &opt);
 	if (police->tcfp_result)
 		NLA_PUT_U32(skb, TCA_POLICE_RESULT, police->tcfp_result);

[094/127] HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Antonio Ospite <ospite@studenti.unina.it>

commit d20d5ffab92f00188f360c44c791a5ffb988247c upstream.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid]
[...]

This is reproducible by disconnecting the device while userspace does
ioctl in a loop and doesn't check return values in order to exit the
loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/hid/hidraw.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -237,11 +237,16 @@ static long hidraw_ioctl(struct file *fi
 	struct inode *inode = file->f_path.dentry->d_inode;
 	unsigned int minor = iminor(inode);
 	long ret = 0;
-	/* FIXME: What stops hidraw_table going NULL */
-	struct hidraw *dev = hidraw_table[minor];
+	struct hidraw *dev;
 	void __user *user_arg = (void __user*) arg;
 
 	lock_kernel();
+	dev = hidraw_table[minor];
+	if (!dev) {
+		ret = -ENODEV;
+		goto out;
+	}
+
 	switch (cmd) {
 		case HIDIOCGRDESCSIZE:
 			if (put_user(dev->hid->rsize, (int __user *)arg))
@@ -314,6 +319,7 @@ static long hidraw_ioctl(struct file *fi
 
 		ret = -ENOTTY;
 	}
+out:
 	unlock_kernel();
 	return ret;
 }

[095/127] HID: hidraw, fix a NULL pointer dereference in hidraw_write

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Antonio Ospite <ospite@studenti.unina.it>

commit e42dee9a99a3ecd32b5c027e8f7411fb5bc11eb6 upstream.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid]
[...]

This is reproducible by disconnecting the device while userspace writes
to dev node in a loop and doesn't check return values in order to exit
the loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/hid/hidraw.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -105,11 +105,15 @@ out:
 static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
 {
 	unsigned int minor = iminor(file->f_path.dentry->d_inode);
-	/* FIXME: What stops hidraw_table going NULL */
-	struct hid_device *dev = hidraw_table[minor]->hid;
+	struct hid_device *dev;
 	__u8 *buf;
 	int ret = 0;
 
+	if (!hidraw_table[minor])
+		return -ENODEV;
+
+	dev = hidraw_table[minor]->hid;
+
 	if (!dev->hid_output_raw_report)
 		return -ENODEV;
 

[096/127] gianfar: Fix crashes on RX path (Was Re: [Bugme-new] [Bug 19692] New: linux-2.6.36-rc5 crash with gianfar ethernet at full line rate traffic)

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: Jarek Poplawski <jarkao2@gmail.com>

[ Upstream commit 0d1fe1111c667e9c713d7efc7ae468a605f236a4 ]

The rx_recycle queue is global per device but can be accesed by many
napi handlers at the same time, so it needs full skb_queue primitives
(with locking). Otherwise, various crashes caused by broken skbs are
possible.

This patch resolves, at least partly, bugzilla bug 19692. (Because of
some doubts that there could be still something around which is hard
to reproduce my proposal is to leave this bug opened for a month.)

Fixes commit: 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add
support for skb recycling")

Reported-by: emin ak <eminak71@gmail.com>
Tested-by: emin ak <eminak71@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
CC: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/net/gianfar.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1621,7 +1621,7 @@ static int gfar_clean_tx_ring(struct net
 		if (skb_queue_len(&priv->rx_recycle) < priv->rx_ring_size &&
 				skb_recycle_check(skb, priv->rx_buffer_size +
 					RXBUF_ALIGNMENT))
-			__skb_queue_head(&priv->rx_recycle, skb);
+			skb_queue_head(&priv->rx_recycle, skb);
 		else
 			dev_kfree_skb_any(skb);
 
@@ -1703,7 +1703,7 @@ struct sk_buff * gfar_new_skb(struct net
 	struct gfar_private *priv = netdev_priv(dev);
 	struct sk_buff *skb = NULL;
 
-	skb = __skb_dequeue(&priv->rx_recycle);
+	skb = skb_dequeue(&priv->rx_recycle);
 	if (!skb)
 		skb = netdev_alloc_skb(dev,
 				priv->rx_buffer_size + RXBUF_ALIGNMENT);
@@ -1862,7 +1862,7 @@ int gfar_clean_rx_ring(struct net_device
 				 * recycle list.
 				 */
 				skb->data = skb->head + NET_SKB_PAD;
-				__skb_queue_head(&priv->rx_recycle, skb);
+				skb_queue_head(&priv->rx_recycle, skb);
 			}
 		} else {
 			/* Increment the number of packets */

[097/127] Limit sysctl_tcp_mem and sysctl_udp_mem initializers to prevent integer overflows.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: Robin Holt <holt@sgi.com>

[ Upstream fixed this in a different way. -DaveM ]

On a 16TB x86_64 machine, sysctl_tcp_mem[2], sysctl_udp_mem[2], and
sysctl_sctp_mem[2] can integer overflow.  Set limit such that they are
maximized without overflowing.

Signed-off-by: Robin Holt <holt@sgi.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: Willy Tarreau <w@1wt.eu>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-sctp@vger.kernel.org
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 net/ipv4/tcp.c      |    4 +++-
 net/ipv4/udp.c      |    4 +++-
 net/sctp/protocol.c |    4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2940,12 +2940,14 @@ void __init tcp_init(void)
 
 	/* Set the pressure threshold to be a fraction of global memory that
 	 * is up to 1/2 at 256 MB, decreasing toward zero with the amount of
-	 * memory, with a floor of 128 pages.
+	 * memory, with a floor of 128 pages, and a ceiling that prevents an
+	 * integer overflow.
 	 */
 	nr_pages = totalram_pages - totalhigh_pages;
 	limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
 	limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
 	limit = max(limit, 128UL);
+	limit = min(limit, INT_MAX * 4UL / 3 / 2);
 	sysctl_tcp_mem[0] = limit / 4 * 3;
 	sysctl_tcp_mem[1] = limit;
 	sysctl_tcp_mem[2] = sysctl_tcp_mem[0] * 2;
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1832,12 +1832,14 @@ void __init udp_init(void)
 	udp_table_init(&udp_table);
 	/* Set the pressure threshold up by the same strategy of TCP. It is a
 	 * fraction of global memory that is up to 1/2 at 256 MB, decreasing
-	 * toward zero with the amount of memory, with a floor of 128 pages.
+	 * toward zero with the amount of memory, with a floor of 128 pages,
+	 * and a ceiling that prevents an integer overflow.
 	 */
 	nr_pages = totalram_pages - totalhigh_pages;
 	limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
 	limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
 	limit = max(limit, 128UL);
+	limit = min(limit, INT_MAX * 4UL / 3 / 2);
 	sysctl_udp_mem[0] = limit / 4 * 3;
 	sysctl_udp_mem[1] = limit;
 	sysctl_udp_mem[2] = sysctl_udp_mem[0] * 2;
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1157,7 +1157,8 @@ SCTP_STATIC __init int sctp_init(void)
 
 	/* Set the pressure threshold to be a fraction of global memory that
 	 * is up to 1/2 at 256 MB, decreasing toward zero with the amount of
-	 * memory, with a floor of 128 pages.
+	 * memory, with a floor of 128 pages, and a ceiling that prevents an
+	 * integer overflow.
 	 * Note this initalizes the data in sctpv6_prot too
 	 * Unabashedly stolen from tcp_init
 	 */
@@ -1165,6 +1166,7 @@ SCTP_STATIC __init int sctp_init(void)
 	limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
 	limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
 	limit = max(limit, 128UL);
+	limit = min(limit, INT_MAX * 4UL / 3 / 2);
 	sysctl_sctp_mem[0] = limit / 4 * 3;
 	sysctl_sctp_mem[1] = limit;
 	sysctl_sctp_mem[2] = sysctl_sctp_mem[0] * 2;

[098/127] sparc64: Fix race in signal instruction flushing.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: David S. Miller <davem@davemloft.net>

[ Upstream commit 05c5e7698bdc54b3079a3517d86077f49ebcc788 ]

If another cpu does a very wide munmap() on the signal frame area,
it can tear down the page table hierarchy from underneath us.

Borrow an idea from the 64-bit fault path's get_user_insn(), and
disable cross call interrupts during the page table traversal
to lock them in place while we operate.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/sparc/kernel/signal32.c |  102 +++++++++++++++++++++++++------------------
 1 file changed, 60 insertions(+), 42 deletions(-)

--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -453,6 +453,64 @@ static int save_fpu_state32(struct pt_re
 	return err;
 }
 
+/* The I-cache flush instruction only works in the primary ASI, which
+ * right now is the nucleus, aka. kernel space.
+ *
+ * Therefore we have to kick the instructions out using the kernel
+ * side linear mapping of the physical address backing the user
+ * instructions.
+ */
+static void flush_signal_insns(unsigned long address)
+{
+	unsigned long pstate, paddr;
+	pte_t *ptep, pte;
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+
+	/* Commit all stores of the instructions we are about to flush.  */
+	wmb();
+
+	/* Disable cross-call reception.  In this way even a very wide
+	 * munmap() on another cpu can't tear down the page table
+	 * hierarchy from underneath us, since that can't complete
+	 * until the IPI tlb flush returns.
+	 */
+
+	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
+	__asm__ __volatile__("wrpr %0, %1, %%pstate"
+				: : "r" (pstate), "i" (PSTATE_IE));
+
+	pgdp = pgd_offset(current->mm, address);
+	if (pgd_none(*pgdp))
+		goto out_irqs_on;
+	pudp = pud_offset(pgdp, address);
+	if (pud_none(*pudp))
+		goto out_irqs_on;
+	pmdp = pmd_offset(pudp, address);
+	if (pmd_none(*pmdp))
+		goto out_irqs_on;
+
+	ptep = pte_offset_map(pmdp, address);
+	pte = *ptep;
+	if (!pte_present(pte))
+		goto out_unmap;
+
+	paddr = (unsigned long) page_address(pte_page(pte));
+
+	__asm__ __volatile__("flush	%0 + %1"
+			     : /* no outputs */
+			     : "r" (paddr),
+			       "r" (address & (PAGE_SIZE - 1))
+			     : "memory");
+
+out_unmap:
+	pte_unmap(ptep);
+out_irqs_on:
+	__asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
+
+}
+
 static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 			  int signo, sigset_t *oldset)
 {
@@ -547,13 +605,7 @@ static void setup_frame32(struct k_sigac
 	if (ka->ka_restorer) {
 		regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
 	} else {
-		/* Flush instruction space. */
 		unsigned long address = ((unsigned long)&(sf->insns[0]));
-		pgd_t *pgdp = pgd_offset(current->mm, address);
-		pud_t *pudp = pud_offset(pgdp, address);
-		pmd_t *pmdp = pmd_offset(pudp, address);
-		pte_t *ptep;
-		pte_t pte;
 
 		regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
 	
@@ -562,22 +614,7 @@ static void setup_frame32(struct k_sigac
 		if (err)
 			goto sigsegv;
 
-		preempt_disable();
-		ptep = pte_offset_map(pmdp, address);
-		pte = *ptep;
-		if (pte_present(pte)) {
-			unsigned long page = (unsigned long)
-				page_address(pte_page(pte));
-
-			wmb();
-			__asm__ __volatile__("flush	%0 + %1"
-					     : /* no outputs */
-					     : "r" (page),
-					       "r" (address & (PAGE_SIZE - 1))
-					     : "memory");
-		}
-		pte_unmap(ptep);
-		preempt_enable();
+		flush_signal_insns(address);
 	}
 	return;
 
@@ -687,12 +724,7 @@ static void setup_rt_frame32(struct k_si
 	if (ka->ka_restorer)
 		regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
 	else {
-		/* Flush instruction space. */
 		unsigned long address = ((unsigned long)&(sf->insns[0]));
-		pgd_t *pgdp = pgd_offset(current->mm, address);
-		pud_t *pudp = pud_offset(pgdp, address);
-		pmd_t *pmdp = pmd_offset(pudp, address);
-		pte_t *ptep;
 
 		regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
 	
@@ -704,21 +736,7 @@ static void setup_rt_frame32(struct k_si
 		if (err)
 			goto sigsegv;
 
-		preempt_disable();
-		ptep = pte_offset_map(pmdp, address);
-		if (pte_present(*ptep)) {
-			unsigned long page = (unsigned long)
-				page_address(pte_page(*ptep));
-
-			wmb();
-			__asm__ __volatile__("flush	%0 + %1"
-					     : /* no outputs */
-					     : "r" (page),
-					       "r" (address & (PAGE_SIZE - 1))
-					     : "memory");
-		}
-		pte_unmap(ptep);
-		preempt_enable();
+		flush_signal_insns(address);
 	}
 	return;
 

[099/127] sparc: Dont mask signal when we cant setup signal frame.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: David S. Miller <davem@davemloft.net>

[ Upstream commit 392c21802ee3aa85cee0e703105f797a8a7b9416 ]

Don't invoke the signal handler tracehook in that situation
either.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/sparc/kernel/signal32.c  |   55 +++++++++++++++++++++++++-----------------
 arch/sparc/kernel/signal_32.c |   53 +++++++++++++++++++++++++---------------
 arch/sparc/kernel/signal_64.c |   43 +++++++++++++++++++-------------
 3 files changed, 93 insertions(+), 58 deletions(-)

--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -511,8 +511,8 @@ out_irqs_on:
 
 }
 
-static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
-			  int signo, sigset_t *oldset)
+static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+			 int signo, sigset_t *oldset)
 {
 	struct signal_frame32 __user *sf;
 	int sigframe_size;
@@ -620,13 +620,16 @@ static void setup_frame32(struct k_sigac
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
-			     unsigned long signr, sigset_t *oldset,
-			     siginfo_t *info)
+static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+			    unsigned long signr, sigset_t *oldset,
+			    siginfo_t *info)
 {
 	struct rt_signal_frame32 __user *sf;
 	int sigframe_size;
@@ -738,22 +741,30 @@ static void setup_rt_frame32(struct k_si
 
 		flush_signal_insns(address);
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signr, current);
+	return -EFAULT;
 }
 
-static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
-				   siginfo_t *info,
-				   sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka,
+				  siginfo_t *info,
+				  sigset_t *oldset, struct pt_regs *regs)
 {
+	int err;
+
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame32(ka, regs, signr, oldset, info);
+		err = setup_rt_frame32(ka, regs, signr, oldset, info);
 	else
-		setup_frame32(ka, regs, signr, oldset);
+		err = setup_frame32(ka, regs, signr, oldset);
+
+	if (err)
+		return err;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -761,6 +772,10 @@ static inline void handle_signal32(unsig
 		sigaddset(&current->blocked,signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs,
@@ -807,16 +822,14 @@ void do_signal32(sigset_t *oldset, struc
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart32(orig_i0, regs, &ka.sa);
-		handle_signal32(signr, &ka, &info, oldset, regs);
-
-		/* A signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TS_RESTORE_SIGMASK flag.
-		 */
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal32(signr, &ka, &info, oldset, regs) == 0) {
+			/* A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		}
 		return;
 	}
 	if (restart_syscall &&
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -315,8 +315,8 @@ save_fpu_state(struct pt_regs *regs, __s
 	return err;
 }
 
-static void setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			int signo, sigset_t *oldset)
+static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
+		       int signo, sigset_t *oldset)
 {
 	struct signal_frame __user *sf;
 	int sigframe_size, err;
@@ -384,16 +384,19 @@ static void setup_frame(struct k_sigacti
 		/* Flush instruction space. */
 		flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
 	}
-	return;
+	return 0;
 
 sigill_and_return:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static void setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			   int signo, sigset_t *oldset, siginfo_t *info)
+static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+			  int signo, sigset_t *oldset, siginfo_t *info)
 {
 	struct rt_signal_frame __user *sf;
 	int sigframe_size;
@@ -466,22 +469,30 @@ static void setup_rt_frame(struct k_siga
 		/* Flush instruction space. */
 		flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static inline void
+static inline int
 handle_signal(unsigned long signr, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
+	int err;
+
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(ka, regs, signr, oldset, info);
+		err = setup_rt_frame(ka, regs, signr, oldset, info);
 	else
-		setup_frame(ka, regs, signr, oldset);
+		err = setup_frame(ka, regs, signr, oldset);
+
+	if (err)
+		return err;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -489,6 +500,10 @@ handle_signal(unsigned long signr, struc
 		sigaddset(&current->blocked, signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
@@ -546,17 +561,15 @@ static void do_signal(struct pt_regs *re
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart(orig_i0, regs, &ka.sa);
-		handle_signal(signr, &ka, &info, oldset, regs);
-
-		/* a signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TIF_RESTORE_SIGMASK flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		return;
 	}
 	if (restart_syscall &&
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -409,7 +409,7 @@ static inline void __user *get_sigframe(
 	return (void __user *) sp;
 }
 
-static inline void
+static inline int
 setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	       int signo, sigset_t *oldset, siginfo_t *info)
 {
@@ -483,26 +483,37 @@ setup_rt_frame(struct k_sigaction *ka, s
 	}
 	/* 4. return to kernel instructions */
 	regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static inline void handle_signal(unsigned long signr, struct k_sigaction *ka,
-				 siginfo_t *info,
-				 sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal(unsigned long signr, struct k_sigaction *ka,
+				siginfo_t *info,
+				sigset_t *oldset, struct pt_regs *regs)
 {
-	setup_rt_frame(ka, regs, signr, oldset,
-		       (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+	int err;
+
+	err = setup_rt_frame(ka, regs, signr, oldset,
+			     (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+	if (err)
+		return err;
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NOMASK))
 		sigaddset(&current->blocked,signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
@@ -571,16 +582,14 @@ static void do_signal(struct pt_regs *re
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart(orig_i0, regs, &ka.sa);
-		handle_signal(signr, &ka, &info, oldset, regs);
-
-		/* A signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TS_RESTORE_SIGMASK flag.
-		 */
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+			/* A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		}
 		return;
 	}
 	if (restart_syscall &&

[100/127] sparc: Prevent no-handler signal syscall restart recursion.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------


From: David S. Miller <davem@davemloft.net>

[ Upstream commit c27852597829128a9c9d96d79ec454a83c6b0da5 ]

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/sparc/kernel/signal32.c  |    4 +++-
 arch/sparc/kernel/signal_32.c |    2 ++
 arch/sparc/kernel/signal_64.c |    2 ++
 3 files changed, 7 insertions(+), 1 deletion(-)

--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -616,7 +616,7 @@ static int setup_frame32(struct k_sigact
 
 		flush_signal_insns(address);
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
@@ -840,12 +840,14 @@ void do_signal32(sigset_t *oldset, struc
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* If there's no signal to deliver, we just put the saved sigmask
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -580,12 +580,14 @@ static void do_signal(struct pt_regs *re
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->pc -= 4;
 		regs->npc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->pc -= 4;
 		regs->npc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* if there's no signal to deliver, we just put the saved sigmask
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -600,12 +600,14 @@ static void do_signal(struct pt_regs *re
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* If there's no signal to deliver, we just put the saved sigmask

[101/127] x86, UV: Delete unneeded boot messages

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jack Steiner <steiner@sgi.com>

commit 2acebe9ecb2b77876e87a1480729cfb2db4570dd upstream.

SGI:UV: Delete extra boot messages that describe the system
topology. These messages are no longer useful.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100317154038.GA29346@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/apic/x2apic_uv_x.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -636,9 +636,6 @@ void __init uv_system_init(void)
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
 		max_pnode = max(pnode, max_pnode);
-
-		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n",
-			cpu, apicid, pnode, nid, lcpu, blade);
 	}
 
 	/* Add blade/pnode info for nodes without cpus */

[102/127] x86, UV: Fix initialization of max_pnode

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jack Steiner <steiner@sgi.com>

commit 36ac4b987bea9a95217e1af552252f275ca7fc44 upstream.

Fix calculation of "max_pnode" for systems where the the highest
blade has neither cpus or memory. (And, yes, although rare this
does occur).

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100910150808.GA19802@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/apic/x2apic_uv_x.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -595,9 +595,11 @@ void __init uv_system_init(void)
 		for (j = 0; j < 64; j++) {
 			if (!test_bit(j, &present))
 				continue;
-			uv_blade_info[blade].pnode = (i * 64 + j);
+			pnode = (i * 64 + j);
+			uv_blade_info[blade].pnode = pnode;
 			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
+			max_pnode = max(pnode, max_pnode);
 			blade++;
 		}
 	}
@@ -635,7 +637,6 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
-		max_pnode = max(pnode, max_pnode);
 	}
 
 	/* Add blade/pnode info for nodes without cpus */
@@ -647,7 +648,6 @@ void __init uv_system_init(void)
 		pnode = (paddr >> m_val) & pnode_mask;
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
-		max_pnode = max(pnode, max_pnode);
 	}
 
 	map_gru_high(max_pnode);

[103/127] drivers/video/efifb.c: support framebuffer for NVIDIA 9400M in MacBook Pro 5,1

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Thomas Gerlach <t.m.gerlach@freenet.de>

commit 8a3bdfe6cd841880a5d849c40f90093b3817f6e0 upstream.

Description of patch:
---------------------

This is a patch for the EFI framebuffer driver to enable the framebuffer
of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up.  The
framebuffer of the NVIDIA graphic cards are located at the following
addresses in memory:

9400M:    0xC0010000
9600M GT: 0xB0030000

The patch delivered right here only provides the memory location of the
framebuffer of the 9400M device.  The 9600M GT is not covered.  It is
assumed that the 9400M is used when powered up the MBP.

The information which device is currently powered and in use is stored in
the 64 bytes large EFI variable "gpu-power-prefs".  More specifically,
byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online.

The PCI bus IDs are the following:
9400M:    PCI 03:00:00
9600M GT: PCI 02:00:00

The EFI variables can be easily read-out and manipulated with "rEFIt", an
MBP specific bootloader tool.  For more information on how handle rEFIt
and EFI variables please consult "http://refit.sourceforge.net" and
"http://ubuntuforums.org/archive/index.php/t-1076879.html".

IMPORTANT NOTE: The information on how to activate the 9400M device given
at "ubuntuforums.org" is not correct, since it states

gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00)
gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00)

Actually, the assignment of the values and the PCI bus IDs are swapped.

Suggestions:
------------

To cover framebuffers of both 9400M and 9600M GT, I would suggest to
implement a conditional on "gpu-power-prefs".  Depending on the value of
byte 0x3B, the according framebuffer is selected.  However, this requires
kernel access to the EFI variables.

[akpm@linux-foundation.org: rename optname, per Peter Jones]
Signed-off-by: Thomas Gerlach <t.m.gerlach@freenet.de>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/video/efifb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -49,6 +49,7 @@ enum {
 	M_MBP_2,	/* MacBook Pro 2nd gen */
 	M_MBP_SR,	/* MacBook Pro (Santa Rosa) */
 	M_MBP_4,	/* MacBook Pro, 4th gen */
+	M_MBP_5_1,    /* MacBook Pro, 5,1th gen */
 	M_UNKNOWN	/* placeholder */
 };
 
@@ -70,6 +71,7 @@ static struct efifb_dmi_info {
 	[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
 	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
 	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
+	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
 	[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
 };
 
@@ -106,6 +108,7 @@ static struct dmi_system_id __initdata d
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
 	{},
 };
 

[104/127] efifb: support the EFI framebuffer on more Apple hardware

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Luke Macken <lmacken@redhat.com>

commit a5757c2a474a15f87e5baa9a4caacc31cde2bae6 upstream.

Enable the EFI framebuffer on 14 more Macs, including the iMac11,1
iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1
MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and
MacBookPro7,1

Information gathered from various user submissions.

    https://bugzilla.redhat.com/show_bug.cgi?id=528232
    http://ubuntuforums.org/showthread.php?t=1557326

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luke Macken <lmacken@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/video/efifb.c |   42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -39,17 +39,31 @@ enum {
 	M_I20,		/* 20-Inch iMac */
 	M_I20_SR,	/* 20-Inch iMac (Santa Rosa) */
 	M_I24,		/* 24-Inch iMac */
+	M_I24_8_1,	/* 24-Inch iMac, 8,1th gen */
+	M_I24_10_1,	/* 24-Inch iMac, 10,1th gen */
+	M_I27_11_1,	/* 27-Inch iMac, 11,1th gen */
 	M_MINI,		/* Mac Mini */
+	M_MINI_3_1,	/* Mac Mini, 3,1th gen */
+	M_MINI_4_1,	/* Mac Mini, 4,1th gen */
 	M_MB,		/* MacBook */
 	M_MB_2,		/* MacBook, 2nd rev. */
 	M_MB_3,		/* MacBook, 3rd rev. */
+	M_MB_5_1,	/* MacBook, 5th rev. */
+	M_MB_6_1,	/* MacBook, 6th rev. */
+	M_MB_7_1,	/* MacBook, 7th rev. */
 	M_MB_SR,	/* MacBook, 2nd gen, (Santa Rosa) */
 	M_MBA,		/* MacBook Air */
 	M_MBP,		/* MacBook Pro */
 	M_MBP_2,	/* MacBook Pro 2nd gen */
+	M_MBP_2_2,	/* MacBook Pro 2,2nd gen */
 	M_MBP_SR,	/* MacBook Pro (Santa Rosa) */
 	M_MBP_4,	/* MacBook Pro, 4th gen */
 	M_MBP_5_1,    /* MacBook Pro, 5,1th gen */
+	M_MBP_5_2,	/* MacBook Pro, 5,2th gen */
+	M_MBP_5_3,	/* MacBook Pro, 5,3rd gen */
+	M_MBP_6_1,	/* MacBook Pro, 6,1th gen */
+	M_MBP_6_2,	/* MacBook Pro, 6,2th gen */
+	M_MBP_7_1,	/* MacBook Pro, 7,1th gen */
 	M_UNKNOWN	/* placeholder */
 };
 
@@ -64,14 +78,28 @@ static struct efifb_dmi_info {
 	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050 }, /* guess */
 	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050 },
 	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200 }, /* guess */
+	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200 },
+	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080 },
+	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440 },
 	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768 },
+	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768 },
+	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200 },
 	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800 },
+	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800 },
+	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800 },
+	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800 },
 	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800 },
 	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900 },
 	[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
+	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900 },
 	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
 	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
 	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
+	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200 },
+	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900 },
+	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200 },
+	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050 },
+	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800 },
 	[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
 };
 
@@ -92,7 +120,12 @@ static struct dmi_system_id __initdata d
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac6,1", M_I24),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac6,1", M_I24),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac7,1", M_I20_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac8,1", M_I24_8_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac10,1", M_I24_10_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac11,1", M_I27_11_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "Macmini1,1", M_MINI),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini3,1", M_MINI_3_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini4,1", M_MINI_4_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook1,1", M_MB),
 	/* At least one of these two will be right; maybe both? */
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook2,1", M_MB),
@@ -101,14 +134,23 @@ static struct dmi_system_id __initdata d
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook3,1", M_MB),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook3,1", M_MB),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook4,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook5,1", M_MB_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro2,1", M_MBP_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,2", M_MBP_5_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,3", M_MBP_5_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
 	{},
 };
 

[105/127] V4L/DVB (13154): uvcvideo: Handle garbage at the end of streaming interface descriptors

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

commit c4ed8c66d79d707d89fe732ff5b97739edf1ba62 upstream.

At least one 5986:0241 webcam model includes vendor-specific descriptors
at the end of its streaming interface descriptors. Print an information
UVC_TRACE_DESCR message and try to continue parsing the descriptors
rather than bailing out with an error.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/video/uvc/uvc_driver.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -436,7 +436,8 @@ static int uvc_parse_format(struct uvc_d
 	/* Parse the frame descriptors. Only uncompressed, MJPEG and frame
 	 * based formats have frame descriptors.
 	 */
-	while (buflen > 2 && buffer[2] == ftype) {
+	while (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+	       buffer[2] == ftype) {
 		frame = &format->frame[format->nframes];
 		if (ftype != UVC_VS_FRAME_FRAME_BASED)
 			n = buflen > 25 ? buffer[25] : 0;
@@ -513,12 +514,14 @@ static int uvc_parse_format(struct uvc_d
 		buffer += buffer[0];
 	}
 
-	if (buflen > 2 && buffer[2] == UVC_VS_STILL_IMAGE_FRAME) {
+	if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+	    buffer[2] == UVC_VS_STILL_IMAGE_FRAME) {
 		buflen -= buffer[0];
 		buffer += buffer[0];
 	}
 
-	if (buflen > 2 && buffer[2] == UVC_VS_COLORFORMAT) {
+	if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+	    buffer[2] == UVC_VS_COLORFORMAT) {
 		if (buflen < 6) {
 			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d COLORFORMAT error\n",
@@ -759,6 +762,11 @@ static int uvc_parse_streaming(struct uv
 		buffer += buffer[0];
 	}
 
+	if (buflen)
+		uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+			"%d has %u bytes of trailing descriptor garbage.\n",
+			dev->udev->devnum, alts->desc.bInterfaceNumber, buflen);
+
 	/* Parse the alternate settings to find the maximum bandwidth. */
 	for (i = 0; i < intf->num_altsetting; ++i) {
 		struct usb_host_endpoint *ep;

[106/127] Input: i8042 - add Sony VAIO VPCZ122GX to nomux list

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[Note that the mainline will not have this particular fix but rather
will blacklist entire VAIO line based off DMI board name. For stable
I am being a bit more cautious and blacklist one particular product.]

Trying to query/activate active multiplexing mode on this VAIO makes
both keyboard and touchpad inoperable. Futher kernels will blacklist
entire VAIO line, however here we blacklist just one particular model.

Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/input/serio/i8042-x86ia64io.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -329,6 +329,13 @@ static const struct dmi_system_id __init
 		},
 	},
 	{
+		/* Sony Vaio VPCZ122GX */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VPCZ122GX"),
+		},
+	},
+	{
 		/* Sony Vaio FS-115b */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),

[107/127] x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: John Hughes <john@calva.com>

commit f5eb917b861828da18dc28854308068c66d1449a upstream.

Here is a patch to stop X.25 examining fields beyond the end of the packet.

For example, when a simple CALL ACCEPTED was received:

	10 10 0f

x25_parse_facilities was attempting to decode the FACILITIES field, but this
packet contains no facilities field.

Signed-off-by: John Hughes <john@calva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/net/x25.h        |    4 ++++
 net/x25/af_x25.c         |   47 ++++++++++++++++++++++++++++++++++++++++++++++-
 net/x25/x25_facilities.c |   12 +++++++++++-
 net/x25/x25_in.c         |   15 +++++++++++----
 4 files changed, 72 insertions(+), 6 deletions(-)

--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -182,6 +182,10 @@ extern int  sysctl_x25_clear_request_tim
 extern int  sysctl_x25_ack_holdback_timeout;
 extern int  sysctl_x25_forward;
 
+extern int x25_parse_address_block(struct sk_buff *skb,
+		struct x25_address *called_addr,
+		struct x25_address *calling_addr);
+
 extern int  x25_addr_ntoa(unsigned char *, struct x25_address *,
 			  struct x25_address *);
 extern int  x25_addr_aton(unsigned char *, struct x25_address *,
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -81,6 +81,41 @@ struct compat_x25_subscrip_struct {
 };
 #endif
 
+
+int x25_parse_address_block(struct sk_buff *skb,
+		struct x25_address *called_addr,
+		struct x25_address *calling_addr)
+{
+	unsigned char len;
+	int needed;
+	int rc;
+
+	if (skb->len < 1) {
+		/* packet has no address block */
+		rc = 0;
+		goto empty;
+	}
+
+	len = *skb->data;
+	needed = 1 + (len >> 4) + (len & 0x0f);
+
+	if (skb->len < needed) {
+		/* packet is too short to hold the addresses it claims
+		   to hold */
+		rc = -1;
+		goto empty;
+	}
+
+	return x25_addr_ntoa(skb->data, called_addr, calling_addr);
+
+empty:
+	*called_addr->x25_addr = 0;
+	*calling_addr->x25_addr = 0;
+
+	return rc;
+}
+
+
 int x25_addr_ntoa(unsigned char *p, struct x25_address *called_addr,
 		  struct x25_address *calling_addr)
 {
@@ -871,16 +906,26 @@ int x25_rx_call_request(struct sk_buff *
 	/*
 	 *	Extract the X.25 addresses and convert them to ASCII strings,
 	 *	and remove them.
+	 *
+	 *	Address block is mandatory in call request packets
 	 */
-	addr_len = x25_addr_ntoa(skb->data, &source_addr, &dest_addr);
+	addr_len = x25_parse_address_block(skb, &source_addr, &dest_addr);
+	if (addr_len <= 0)
+		goto out_clear_request;
 	skb_pull(skb, addr_len);
 
 	/*
 	 *	Get the length of the facilities, skip past them for the moment
 	 *	get the call user data because this is needed to determine
 	 *	the correct listener
+	 *
+	 *	Facilities length is mandatory in call request packets
 	 */
+	if (skb->len < 1)
+		goto out_clear_request;
 	len = skb->data[0] + 1;
+	if (skb->len < len)
+		goto out_clear_request;
 	skb_pull(skb,len);
 
 	/*
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -35,7 +35,7 @@ int x25_parse_facilities(struct sk_buff
 		struct x25_dte_facilities *dte_facs, unsigned long *vc_fac_mask)
 {
 	unsigned char *p = skb->data;
-	unsigned int len = *p++;
+	unsigned int len;
 
 	*vc_fac_mask = 0;
 
@@ -50,6 +50,14 @@ int x25_parse_facilities(struct sk_buff
 	memset(dte_facs->called_ae, '\0', sizeof(dte_facs->called_ae));
 	memset(dte_facs->calling_ae, '\0', sizeof(dte_facs->calling_ae));
 
+	if (skb->len < 1)
+		return 0;
+
+	len = *p++;
+
+	if (len >= skb->len)
+		return -1;
+
 	while (len > 0) {
 		switch (*p & X25_FAC_CLASS_MASK) {
 		case X25_FAC_CLASS_A:
@@ -247,6 +255,8 @@ int x25_negotiate_facilities(struct sk_b
 	memcpy(new, ours, sizeof(*new));
 
 	len = x25_parse_facilities(skb, &theirs, dte, &x25->vc_facil_mask);
+	if (len < 0)
+		return len;
 
 	/*
 	 *	They want reverse charging, we won't accept it.
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -89,6 +89,7 @@ static int x25_queue_rx_frame(struct soc
 static int x25_state1_machine(struct sock *sk, struct sk_buff *skb, int frametype)
 {
 	struct x25_address source_addr, dest_addr;
+	int len;
 
 	switch (frametype) {
 		case X25_CALL_ACCEPTED: {
@@ -106,11 +107,17 @@ static int x25_state1_machine(struct soc
 			 *	Parse the data in the frame.
 			 */
 			skb_pull(skb, X25_STD_MIN_LEN);
-			skb_pull(skb, x25_addr_ntoa(skb->data, &source_addr, &dest_addr));
-			skb_pull(skb,
-				 x25_parse_facilities(skb, &x25->facilities,
+
+			len = x25_parse_address_block(skb, &source_addr,
+						&dest_addr);
+			if (len > 0)
+				skb_pull(skb, len);
+
+			len = x25_parse_facilities(skb, &x25->facilities,
 						&x25->dte_facilities,
-						&x25->vc_facil_mask));
+						&x25->vc_facil_mask);
+			if (len > 0)
+				skb_pull(skb, len);
 			/*
 			 *	Copy any Call User Data.
 			 */

[108/127] memory corruption in X.25 facilities parsing

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: andrew hendry <andrew.hendry@gmail.com>

commit a6331d6f9a4298173b413cf99a40cc86a9d92c37 upstream.

Signed-of-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/x25/x25_facilities.c |    8 ++++----
 net/x25/x25_in.c         |    2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -134,15 +134,15 @@ int x25_parse_facilities(struct sk_buff
 		case X25_FAC_CLASS_D:
 			switch (*p) {
 			case X25_FAC_CALLING_AE:
-				if (p[1] > X25_MAX_DTE_FACIL_LEN)
-					break;
+				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+					return 0;
 				dte_facs->calling_len = p[2];
 				memcpy(dte_facs->calling_ae, &p[3], p[1] - 1);
 				*vc_fac_mask |= X25_MASK_CALLING_AE;
 				break;
 			case X25_FAC_CALLED_AE:
-				if (p[1] > X25_MAX_DTE_FACIL_LEN)
-					break;
+				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
+					return 0;
 				dte_facs->called_len = p[2];
 				memcpy(dte_facs->called_ae, &p[3], p[1] - 1);
 				*vc_fac_mask |= X25_MASK_CALLED_AE;
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -118,6 +118,8 @@ static int x25_state1_machine(struct soc
 						&x25->vc_facil_mask);
 			if (len > 0)
 				skb_pull(skb, len);
+			else
+				return -1;
 			/*
 			 *	Copy any Call User Data.
 			 */

[109/127] can-bcm: fix minor heap overflow

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 0597d1b99fcfc2c0eada09a698f85ed413d4ba84 upstream.

On 64-bit platforms the ASCII representation of a pointer may be up to 17
bytes long. This patch increases the length of the buffer accordingly.

http://marc.info/?l=linux-netdev&m=128872251418192&w=2

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/can/bcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -124,7 +124,7 @@ struct bcm_sock {
 	struct list_head tx_ops;
 	unsigned long dropped_usr_msgs;
 	struct proc_dir_entry *bcm_proc_read;
-	char procname [9]; /* pointer printed in ASCII with \0 */
+	char procname [20]; /* pointer printed in ASCII with \0 */
 };
 
 static inline struct bcm_sock *bcm_sk(const struct sock *sk)

[110/127] V4L/DVB: ivtvfb: prevent reading uninitialized stack memory

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 405707985594169cfd0b1d97d29fcb4b4c6f2ac9 upstream.

The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16
bytes of uninitialized stack memory, because the "reserved" member of
the fb_vblank struct declared on the stack is not altered or zeroed
before being copied back to the user.  This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/media/video/ivtv/ivtvfb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -457,6 +457,8 @@ static int ivtvfb_ioctl(struct fb_info *
 			struct fb_vblank vblank;
 			u32 trace;
 
+			memset(&vblank, 0, sizeof(struct fb_vblank));
+
 			vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
 					FB_VBLANK_HAVE_VSYNC;
 			trace = read_reg(0x028c0) >> 16;

[111/127] x25: Prevent crashing when parsing bad X.25 facilities

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 5ef41308f94dcbb3b7afc56cdef1c2ba53fa5d2f upstream.

Now with improved comma support.

On parsing malformed X.25 facilities, decrementing the remaining length
may cause it to underflow.  Since the length is an unsigned integer,
this will result in the loop continuing until the kernel crashes.

This patch adds checks to ensure decrementing the remaining length does
not cause it to wrap around.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/x25/x25_facilities.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -61,6 +61,8 @@ int x25_parse_facilities(struct sk_buff
 	while (len > 0) {
 		switch (*p & X25_FAC_CLASS_MASK) {
 		case X25_FAC_CLASS_A:
+			if (len < 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_REVERSE:
 				if((p[1] & 0x81) == 0x81) {
@@ -104,6 +106,8 @@ int x25_parse_facilities(struct sk_buff
 			len -= 2;
 			break;
 		case X25_FAC_CLASS_B:
+			if (len < 3)
+				return 0;
 			switch (*p) {
 			case X25_FAC_PACKET_SIZE:
 				facilities->pacsize_in  = p[1];
@@ -125,6 +129,8 @@ int x25_parse_facilities(struct sk_buff
 			len -= 3;
 			break;
 		case X25_FAC_CLASS_C:
+			if (len < 4)
+				return 0;
 			printk(KERN_DEBUG "X.25: unknown facility %02X, "
 			       "values %02X, %02X, %02X\n",
 			       p[0], p[1], p[2], p[3]);
@@ -132,6 +138,8 @@ int x25_parse_facilities(struct sk_buff
 			len -= 4;
 			break;
 		case X25_FAC_CLASS_D:
+			if (len < p[1] + 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_CALLING_AE:
 				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
@@ -149,9 +157,7 @@ int x25_parse_facilities(struct sk_buff
 				break;
 			default:
 				printk(KERN_DEBUG "X.25: unknown facility %02X,"
-					"length %d, values %02X, %02X, "
-					"%02X, %02X\n",
-					p[0], p[1], p[2], p[3], p[4], p[5]);
+					"length %d\n", p[0], p[1]);
 				break;
 			}
 			len -= p[1] + 2;

[112/127] crypto: padlock - Fix AES-CBC handling on odd-block-sized input

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

commit c054a076a1bd4731820a9c4d638b13d5c9bf5935 upstream.

On certain VIA chipsets AES-CBC requires the input/output to be
a multiple of 64 bytes.  We had a workaround for this but it was
buggy as it sent the whole input for processing when it is meant
to only send the initial number of blocks which makes the rest
a multiple of 64 bytes.

As expected this causes memory corruption whenever the workaround
kicks in.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/crypto/padlock-aes.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -285,7 +285,7 @@ static inline u8 *padlock_xcrypt_cbc(con
 	if (initial)
 		asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 			      : "+S" (input), "+D" (output), "+a" (iv)
-			      : "d" (control_word), "b" (key), "c" (count));
+			      : "d" (control_word), "b" (key), "c" (initial));
 
 	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 		      : "+S" (input), "+D" (output), "+a" (iv)

[113/127] x86-32: Separate 1:1 pagetables from swapper_pg_dir

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Joerg Roedel <joerg.roedel@amd.com>

commit fd89a137924e0710078c3ae855e7cec1c43cb845 upstream.

This patch fixes machine crashes which occur when heavily exercising the
CPU hotplug codepaths on a 32-bit kernel. These crashes are caused by
AMD Erratum 383 and result in a fatal machine check exception. Here's
the scenario:

1. On 32-bit, the swapper_pg_dir page table is used as the initial page
table for booting a secondary CPU.

2. To make this work, swapper_pg_dir needs a direct mapping of physical
memory in it (the low mappings). By adding those low, large page (2M)
mappings (PAE kernel), we create the necessary conditions for Erratum
383 to occur.

3. Other CPUs which do not participate in the off- and onlining game may
use swapper_pg_dir while the low mappings are present (when leave_mm is
called). For all steps below, the CPU referred to is a CPU that is using
swapper_pg_dir, and not the CPU which is being onlined.

4. The presence of the low mappings in swapper_pg_dir can result
in TLB entries for addresses below __PAGE_OFFSET to be established
speculatively. These TLB entries are marked global and large.

5. When the CPU with such TLB entry switches to another page table, this
TLB entry remains because it is global.

6. The process then generates an access to an address covered by the
above TLB entry but there is a permission mismatch - the TLB entry
covers a large global page not accessible to userspace.

7. Due to this permission mismatch a new 4kb, user TLB entry gets
established. Further, Erratum 383 provides for a small window of time
where both TLB entries are present. This results in an uncorrectable
machine check exception signalling a TLB multimatch which panics the
machine.

There are two ways to fix this issue:

        1. Always do a global TLB flush when a new cr3 is loaded and the
        old page table was swapper_pg_dir. I consider this a hack hard
        to understand and with performance implications

        2. Do not use swapper_pg_dir to boot secondary CPUs like 64-bit
        does.

This patch implements solution 2. It introduces a trampoline_pg_dir
which has the same layout as swapper_pg_dir with low_mappings. This page
table is used as the initial page table of the booting CPU. Later in the
bringup process, it switches to swapper_pg_dir and does a global TLB
flush. This fixes the crashes in our test cases.

-v2: switch to swapper_pg_dir right after entering start_secondary() so
that we are able to access percpu data which might not be mapped in the
trampoline page table.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100816123833.GB28147@aftab>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/include/asm/pgtable_32.h |    1 +
 arch/x86/include/asm/trampoline.h |    3 +++
 arch/x86/kernel/head_32.S         |    8 +++++++-
 arch/x86/kernel/setup.c           |    3 +++
 arch/x86/kernel/smpboot.c         |   32 +++++++++++++-------------------
 arch/x86/kernel/trampoline.c      |   18 ++++++++++++++++++
 6 files changed, 45 insertions(+), 20 deletions(-)

--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -27,6 +27,7 @@ struct mm_struct;
 struct vm_area_struct;
 
 extern pgd_t swapper_pg_dir[1024];
+extern pgd_t trampoline_pg_dir[1024];
 
 static inline void pgtable_cache_init(void) { }
 static inline void check_pgt_cache(void) { }
--- a/arch/x86/include/asm/trampoline.h
+++ b/arch/x86/include/asm/trampoline.h
@@ -13,15 +13,18 @@ extern unsigned char *trampoline_base;
 
 extern unsigned long init_rsp;
 extern unsigned long initial_code;
+extern unsigned long initial_page_table;
 extern unsigned long initial_gs;
 
 #define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE)
 #define TRAMPOLINE_BASE 0x6000
 
 extern unsigned long setup_trampoline(void);
+extern void __init setup_trampoline_page_table(void);
 extern void __init reserve_trampoline_memory(void);
 #else
 static inline void reserve_trampoline_memory(void) {};
+extern void __init setup_trampoline_page_table(void) {};
 #endif /* CONFIG_X86_TRAMPOLINE */
 
 #endif /* __ASSEMBLY__ */
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -324,7 +324,7 @@ ENTRY(startup_32_smp)
 /*
  * Enable paging
  */
-	movl $pa(swapper_pg_dir),%eax
+	movl pa(initial_page_table), %eax
 	movl %eax,%cr3		/* set the page table pointer.. */
 	movl %cr0,%eax
 	orl  $X86_CR0_PG,%eax
@@ -604,6 +604,8 @@ ignore_int:
 .align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
+ENTRY(initial_page_table)
+	.long pa(swapper_pg_dir)
 
 /*
  * BSS section
@@ -619,6 +621,10 @@ ENTRY(swapper_pg_dir)
 #endif
 swapper_pg_fixmap:
 	.fill 1024,4,0
+#ifdef CONFIG_X86_TRAMPOLINE
+ENTRY(trampoline_pg_dir)
+	.fill 1024,4,0
+#endif
 ENTRY(empty_zero_page)
 	.fill 4096,1,0
 
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -110,6 +110,7 @@
 #include <asm/numa_64.h>
 #endif
 #include <asm/mce.h>
+#include <asm/trampoline.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -998,6 +999,8 @@ void __init setup_arch(char **cmdline_p)
 	paging_init();
 	x86_init.paging.pagetable_setup_done(swapper_pg_dir);
 
+	setup_trampoline_page_table();
+
 	tboot_probe();
 
 #ifdef CONFIG_X86_64
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -70,7 +70,6 @@
 
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
-static int low_mappings;
 #endif
 
 /* State of each CPU */
@@ -292,6 +291,18 @@ notrace static void __cpuinit start_seco
 	 * fragile that we want to limit the things done here to the
 	 * most necessary things.
 	 */
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Switch away from the trampoline page-table
+	 *
+	 * Do this before cpu_init() because it needs to access per-cpu
+	 * data which may not be mapped in the trampoline page-table.
+	 */
+	load_cr3(swapper_pg_dir);
+	__flush_tlb_all();
+#endif
+
 	vmi_bringup();
 	cpu_init();
 	preempt_disable();
@@ -310,12 +321,6 @@ notrace static void __cpuinit start_seco
 		enable_8259A_irq(0);
 	}
 
-#ifdef CONFIG_X86_32
-	while (low_mappings)
-		cpu_relax();
-	__flush_tlb_all();
-#endif
-
 	/* This must be done before setting cpu_online_mask */
 	set_cpu_sibling_map(raw_smp_processor_id());
 	wmb();
@@ -741,6 +746,7 @@ do_rest:
 #ifdef CONFIG_X86_32
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	irq_ctx_init(cpu);
+	initial_page_table = __pa(&trampoline_pg_dir);
 #else
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
@@ -885,20 +891,8 @@ int __cpuinit native_cpu_up(unsigned int
 
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
-#ifdef CONFIG_X86_32
-	/* init low mem mapping */
-	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-		min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-	flush_tlb_all();
-	low_mappings = 1;
-
 	err = do_boot_cpu(apicid, cpu);
 
-	zap_low_mappings(false);
-	low_mappings = 0;
-#else
-	err = do_boot_cpu(apicid, cpu);
-#endif
 	if (err) {
 		pr_debug("do_boot_cpu failed %d\n", err);
 		return -EIO;
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -1,6 +1,7 @@
 #include <linux/io.h>
 
 #include <asm/trampoline.h>
+#include <asm/pgtable.h>
 #include <asm/e820.h>
 
 #if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP)
@@ -39,3 +40,20 @@ unsigned long __trampinit setup_trampoli
 	memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
 	return virt_to_phys(trampoline_base);
 }
+
+void __init setup_trampoline_page_table(void)
+{
+#ifdef CONFIG_X86_32
+	/* Copy kernel address range */
+	clone_pgd_range(trampoline_pg_dir + KERNEL_PGD_BOUNDARY,
+			swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+			min_t(unsigned long, KERNEL_PGD_PTRS,
+			      KERNEL_PGD_BOUNDARY));
+
+	/* Initialize low mappings */
+	clone_pgd_range(trampoline_pg_dir,
+			swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+			min_t(unsigned long, KERNEL_PGD_PTRS,
+			      KERNEL_PGD_BOUNDARY));
+#endif
+}

[114/127] x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Hugh Dickins <hughd@google.com>

commit b7d460897739e02f186425b7276e3fdb1595cea7 upstream.

rc2 kernel crashes when booting second cpu on this CONFIG_VMSPLIT_2G_OPT
laptop: whereas cloning from kernel to low mappings pgd range does need
to limit by both KERNEL_PGD_PTRS and KERNEL_PGD_BOUNDARY, cloning kernel
pgd range itself must not be limited by the smaller KERNEL_PGD_BOUNDARY.

Signed-off-by: Hugh Dickins <hughd@google.com>
LKML-Reference: <alpine.LSU.2.00.1008242235120.2515@sister.anvils>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
 arch/x86/kernel/trampoline.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -47,8 +47,7 @@ void __init setup_trampoline_page_table(
 	/* Copy kernel address range */
 	clone_pgd_range(trampoline_pg_dir + KERNEL_PGD_BOUNDARY,
 			swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-			min_t(unsigned long, KERNEL_PGD_PTRS,
-			      KERNEL_PGD_BOUNDARY));
+			KERNEL_PGD_PTRS);
 
 	/* Initialize low mappings */
 	clone_pgd_range(trampoline_pg_dir,

[115/127] x86-32: Fix dummy trampoline-related inline stubs

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: H. Peter Anvin <hpa@zytor.com>

commit 8848a91068c018bc91f597038a0f41462a0f88a4 upstream.

Fix dummy inline stubs for trampoline-related functions when no
trampolines exist (until we get rid of the no-trampoline case
entirely.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <4C6C294D.3030404@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/include/asm/trampoline.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/trampoline.h
+++ b/arch/x86/include/asm/trampoline.h
@@ -23,8 +23,8 @@ extern unsigned long setup_trampoline(vo
 extern void __init setup_trampoline_page_table(void);
 extern void __init reserve_trampoline_memory(void);
 #else
-static inline void reserve_trampoline_memory(void) {};
-extern void __init setup_trampoline_page_table(void) {};
+static inline void setup_trampoline_page_table(void) {}
+static inline void reserve_trampoline_memory(void) {}
 #endif /* CONFIG_X86_TRAMPOLINE */
 
 #endif /* __ASSEMBLY__ */

[116/127] econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Phil Blundell <philb@gnu.org>

commit fa0e846494792e722d817b9d3d625a4ef4896c96 upstream.

Later parts of econet_sendmsg() rely on saddr != NULL, so return early
with EINVAL if NULL was passed otherwise an oops may occur.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/econet/af_econet.c |   26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -296,23 +296,14 @@ static int econet_sendmsg(struct kiocb *
 
 	mutex_lock(&econet_mutex);
 
-	if (saddr == NULL) {
-		struct econet_sock *eo = ec_sk(sk);
-
-		addr.station = eo->station;
-		addr.net     = eo->net;
-		port	     = eo->port;
-		cb	     = eo->cb;
-	} else {
-		if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
-			mutex_unlock(&econet_mutex);
-			return -EINVAL;
-		}
-		addr.station = saddr->addr.station;
-		addr.net = saddr->addr.net;
-		port = saddr->port;
-		cb = saddr->cb;
-	}
+        if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+                mutex_unlock(&econet_mutex);
+                return -EINVAL;
+        }
+        addr.station = saddr->addr.station;
+        addr.net = saddr->addr.net;
+        port = saddr->port;
+        cb = saddr->cb;
 
 	/* Look for a device with the right network number. */
 	dev = net2dev_map[addr.net];
@@ -350,7 +341,6 @@ static int econet_sendmsg(struct kiocb *
 
 		eb = (struct ec_cb *)&skb->cb;
 
-		/* BUG: saddr may be NULL */
 		eb->cookie = saddr->cookie;
 		eb->sec = *saddr;
 		eb->sent = ec_tx_done;

[117/127] econet: fix CVE-2010-3850

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Phil Blundell <philb@gnu.org>

commit 16c41745c7b92a243d0874f534c1655196c64b74 upstream.

Add missing check for capable(CAP_NET_ADMIN) in SIOCSIFADDR operation.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/econet/af_econet.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -659,6 +659,9 @@ static int ec_dev_ioctl(struct socket *s
 	err = 0;
 	switch (cmd) {
 	case SIOCSIFADDR:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
 		edev = dev->ec_ptr;
 		if (edev == NULL) {
 			/* Magic up a new one. */

[118/127] rds: Integer overflow in RDS cmsg handling

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Dan Rosenberg <drosenberg@vsecurity.com>

commit 218854af84038d828a32f061858b1902ed2beec6 upstream.

In rds_cmsg_rdma_args(), the user-provided args->nr_local value is
restricted to less than UINT_MAX.  This seems to need a tighter upper
bound, since the calculation of total iov_size can overflow, resulting
in a small sock_kmalloc() allocation.  This would probably just result
in walking off the heap and crashing when calling rds_rdma_pages() with
a high count value.  If it somehow doesn't crash here, then memory
corruption could occur soon after.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/rds/rdma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -447,7 +447,7 @@ static struct rds_rdma_op *rds_rdma_prep
 		goto out;
 	}
 
-	if (args->nr_local > (u64)UINT_MAX) {
+	if (args->nr_local > UIO_MAXIOV) {
 		ret = -EMSGSIZE;
 		goto out;
 	}

[119/127] net: Truncate recvfrom and sendto length to INT_MAX.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 253eacc070b114c2ec1f81b067d2fed7305467b0 upstream.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/socket.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/socket.c
+++ b/net/socket.c
@@ -1673,6 +1673,8 @@ SYSCALL_DEFINE6(sendto, int, fd, void __
 	struct iovec iov;
 	int fput_needed;
 
+	if (len > INT_MAX)
+		len = INT_MAX;
 	sock = sockfd_lookup_light(fd, &err, &fput_needed);
 	if (!sock)
 		goto out;
@@ -1730,6 +1732,8 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void
 	int err, err2;
 	int fput_needed;
 
+	if (size > INT_MAX)
+		size = INT_MAX;
 	sock = sockfd_lookup_light(fd, &err, &fput_needed);
 	if (!sock)
 		goto out;

[120/127] net: Limit socket I/O iovec total length to INT_MAX.

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: David S. Miller <davem@davemloft.net>

commit 8acfe468b0384e834a303f08ebc4953d72fb690a upstream.

This helps protect us from overflow issues down in the
individual protocol sendmsg/recvmsg handlers.  Once
we hit INT_MAX we truncate out the rest of the iovec
by setting the iov_len members to zero.

This works because:

1) For SOCK_STREAM and SOCK_SEQPACKET sockets, partial
   writes are allowed and the application will just continue
   with another write to send the rest of the data.

2) For datagram oriented sockets, where there must be a
   one-to-one correspondance between write() calls and
   packets on the wire, INT_MAX is going to be far larger
   than the packet size limit the protocol is going to
   check for and signal with -EMSGSIZE.

Based upon a patch by Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 include/linux/socket.h |    2 +-
 net/compat.c           |   10 ++++++----
 net/core/iovec.c       |   20 +++++++++-----------
 3 files changed, 16 insertions(+), 16 deletions(-)

--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -304,7 +304,7 @@ extern int csum_partial_copy_fromiovecen
 					  int offset, 
 					  unsigned int len, __wsum *csump);
 
-extern long verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
+extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
 extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
 extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
 			     int offset, int len);
--- a/net/compat.c
+++ b/net/compat.c
@@ -40,10 +40,12 @@ static inline int iov_from_user_compat_t
 		compat_size_t len;
 
 		if (get_user(len, &uiov32->iov_len) ||
-		   get_user(buf, &uiov32->iov_base)) {
-			tot_len = -EFAULT;
-			break;
-		}
+		    get_user(buf, &uiov32->iov_base))
+			return -EFAULT;
+
+		if (len > INT_MAX - tot_len)
+			len = INT_MAX - tot_len;
+
 		tot_len += len;
 		kiov->iov_base = compat_ptr(buf);
 		kiov->iov_len = (__kernel_size_t) len;
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -36,10 +36,9 @@
  *	in any case.
  */
 
-long verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode)
+int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode)
 {
-	int size, ct;
-	long err;
+	int size, ct, err;
 
 	if (m->msg_namelen) {
 		if (mode == VERIFY_READ) {
@@ -61,14 +60,13 @@ long verify_iovec(struct msghdr *m, stru
 	err = 0;
 
 	for (ct = 0; ct < m->msg_iovlen; ct++) {
-		err += iov[ct].iov_len;
-		/*
-		 * Goal is not to verify user data, but to prevent returning
-		 * negative value, which is interpreted as errno.
-		 * Overflow is still possible, but it is harmless.
-		 */
-		if (err < 0)
-			return -EMSGSIZE;
+		size_t len = iov[ct].iov_len;
+
+		if (len > INT_MAX - err) {
+			len = INT_MAX - err;
+			iov[ct].iov_len = len;
+		}
+		err += len;
 	}
 
 	return err;

[121/127] [S390] nmi: fix clock comparator revalidation

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit e8129c642155616d9e2160a75f103e127c8c3708 upstream.

On each machine check all registers are revalidated. The save area for
the clock comparator however only contains the upper most seven bytes
of the former contents, if valid.
Therefore the machine check handler uses a store clock instruction to
get the current time and writes that to the clock comparator register
which in turn will generate an immediate timer interrupt.
However within the lowcore the expected time of the next timer
interrupt is stored. If the interrupt happens before that time the
handler won't be called. In turn the clock comparator won't be
reprogrammed and therefore the interrupt condition stays pending which
causes an interrupt loop until the expected time is reached.

On NOHZ machines this can result in unresponsive machines since the
time of the next expected interrupted can be a couple of days in the
future.

To fix this just revalidate the clock comparator register with the
expected value.
In addition the special handling for udelay must be changed as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/s390/kernel/nmi.c |   10 ++++------
 arch/s390/lib/delay.c  |   14 +++++++++-----
 2 files changed, 13 insertions(+), 11 deletions(-)

--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +213,10 @@ static int notrace s390_revalidate_regis
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(S390_lowcore.mcck_clock);
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned l
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);

Re: [121/127] [S390] nmi: fix clock comparator revalidation

[Heiko Carstens]

On Tue, Dec 07, 2010 at 04:45:07PM -0800, Greg KH wrote:
> 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> 
> ------------------
> 
> From: Heiko Carstens <heiko.carstens@de.ibm.com>
> 
> commit e8129c642155616d9e2160a75f103e127c8c3708 upstream.
> 
> On each machine check all registers are revalidated. The save area for
> the clock comparator however only contains the upper most seven bytes
> of the former contents, if valid.
> Therefore the machine check handler uses a store clock instruction to
> get the current time and writes that to the clock comparator register
> which in turn will generate an immediate timer interrupt.
> However within the lowcore the expected time of the next timer
> interrupt is stored. If the interrupt happens before that time the
> handler won't be called. In turn the clock comparator won't be
> reprogrammed and therefore the interrupt condition stays pending which
> causes an interrupt loop until the expected time is reached.
> 
> On NOHZ machines this can result in unresponsive machines since the
> time of the next expected interrupted can be a couple of days in the
> future.
> 
> To fix this just revalidate the clock comparator register with the
> expected value.
> In addition the special handling for udelay must be changed as well.
> 
> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[...]

> ---
>  arch/s390/kernel/nmi.c |   10 ++++------
>  arch/s390/lib/delay.c  |   14 +++++++++-----
>  2 files changed, 13 insertions(+), 11 deletions(-)
> 
> --- a/arch/s390/kernel/nmi.c
> +++ b/arch/s390/kernel/nmi.c
> @@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
>  static int notrace s390_revalidate_registers(struct mci *mci)
>  {
>  	int kill_task;
> -	u64 tmpclock;
>  	u64 zero;
>  	void *fpt_save_area, *fpt_creg_save_area;
> 
> @@ -214,11 +213,10 @@ static int notrace s390_revalidate_regis
>  			: "0", "cc");
>  #endif
>  	/* Revalidate clock comparator register */
> -	asm volatile(
> -		"	stck	0(%1)\n"
> -		"	sckc	0(%1)"
> -		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
> -
> +	if (S390_lowcore.clock_comparator == -1)
> +		set_clock_comparator(S390_lowcore.mcck_clock);
^^^
This line won't compile on 2.6.32. That's why I sent a slightly different
patch to -stable (and also the reason why I removed Martin's Sign-off) ;)

Here is the version I sent to stable@kernel.org again:

Subject: [S390] nmi: fix clock comparator revalidation

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit e8129c642155616d9e2160a75f103e127c8c3708 upstream

On each machine check all registers are revalidated. The save area for
the clock comparator however only contains the upper most seven bytes
of the former contents, if valid.
Therefore the machine check handler uses a store clock instruction to
get the current time and writes that to the clock comparator register
which in turn will generate an immediate timer interrupt.
However within the lowcore the expected time of the next timer
interrupt is stored. If the interrupt happens before that time the
handler won't be called. In turn the clock comparator won't be
reprogrammed and therefore the interrupt condition stays pending which
causes an interrupt loop until the expected time is reached.

On NOHZ machines this can result in unresponsive machines since the
time of the next expected interrupted can be a couple of days in the
future.

To fix this just revalidate the clock comparator register with the
expected value.
In addition the special handling for udelay must be changed as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---

Patch applies against 2.6.32.26.

 arch/s390/kernel/nmi.c |   10 ++++------
 arch/s390/lib/delay.c  |   14 +++++++++-----
 2 files changed, 13 insertions(+), 11 deletions(-)

--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +213,10 @@ static int notrace s390_revalidate_regis
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(get_clock());
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned l
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);

Re: [121/127] [S390] nmi: fix clock comparator revalidation

[Greg KH]

On Wed, Dec 08, 2010 at 09:04:28AM +0100, Heiko Carstens wrote:
> On Tue, Dec 07, 2010 at 04:45:07PM -0800, Greg KH wrote:
> > 2.6.32-stable review patch.  If anyone has any objections, please let us know.
> > 
> > ------------------
> > 
> > From: Heiko Carstens <heiko.carstens@de.ibm.com>
> > 
> > commit e8129c642155616d9e2160a75f103e127c8c3708 upstream.
> > 
> > On each machine check all registers are revalidated. The save area for
> > the clock comparator however only contains the upper most seven bytes
> > of the former contents, if valid.
> > Therefore the machine check handler uses a store clock instruction to
> > get the current time and writes that to the clock comparator register
> > which in turn will generate an immediate timer interrupt.
> > However within the lowcore the expected time of the next timer
> > interrupt is stored. If the interrupt happens before that time the
> > handler won't be called. In turn the clock comparator won't be
> > reprogrammed and therefore the interrupt condition stays pending which
> > causes an interrupt loop until the expected time is reached.
> > 
> > On NOHZ machines this can result in unresponsive machines since the
> > time of the next expected interrupted can be a couple of days in the
> > future.
> > 
> > To fix this just revalidate the clock comparator register with the
> > expected value.
> > In addition the special handling for udelay must be changed as well.
> > 
> > Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
> > Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> 
> [...]
> 
> > ---
> >  arch/s390/kernel/nmi.c |   10 ++++------
> >  arch/s390/lib/delay.c  |   14 +++++++++-----
> >  2 files changed, 13 insertions(+), 11 deletions(-)
> > 
> > --- a/arch/s390/kernel/nmi.c
> > +++ b/arch/s390/kernel/nmi.c
> > @@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
> >  static int notrace s390_revalidate_registers(struct mci *mci)
> >  {
> >  	int kill_task;
> > -	u64 tmpclock;
> >  	u64 zero;
> >  	void *fpt_save_area, *fpt_creg_save_area;
> > 
> > @@ -214,11 +213,10 @@ static int notrace s390_revalidate_regis
> >  			: "0", "cc");
> >  #endif
> >  	/* Revalidate clock comparator register */
> > -	asm volatile(
> > -		"	stck	0(%1)\n"
> > -		"	sckc	0(%1)"
> > -		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
> > -
> > +	if (S390_lowcore.clock_comparator == -1)
> > +		set_clock_comparator(S390_lowcore.mcck_clock);
> ^^^
> This line won't compile on 2.6.32. That's why I sent a slightly different
> patch to -stable (and also the reason why I removed Martin's Sign-off) ;)

Ah, please be more clear that you are sending a modifed version for me
to apply instead of taking the upstream patch directly, which is the
default for me to do so in order to make sure nothing is incorrect.

> 
> Here is the version I sent to stable@kernel.org again:
> 
> Subject: [S390] nmi: fix clock comparator revalidation

I'll go replace the version I had with this one.

thanks,

greg k-h

Re: [121/127] [S390] nmi: fix clock comparator revalidation

[Heiko Carstens]

On Wed, Dec 08, 2010 at 09:13:31AM -0800, Greg KH wrote:
> On Wed, Dec 08, 2010 at 09:04:28AM +0100, Heiko Carstens wrote:
> > This line won't compile on 2.6.32. That's why I sent a slightly different
> > patch to -stable (and also the reason why I removed Martin's Sign-off) ;)
> 
> Ah, please be more clear that you are sending a modifed version for me
> to apply instead of taking the upstream patch directly, which is the
> default for me to do so in order to make sure nothing is incorrect.

Ok, will do next time. Sorry for the confusion.

Re: [121/127] [S390] nmi: fix clock comparator revalidation

[Greg KH]

On Wed, Dec 08, 2010 at 09:04:28AM +0100, Heiko Carstens wrote:
> This line won't compile on 2.6.32. That's why I sent a slightly different
> patch to -stable (and also the reason why I removed Martin's Sign-off) ;)
> 
> Here is the version I sent to stable@kernel.org again:

Now updated.

thanks,

greg k-h

[122/127] act_nat: use stack variable

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Changli Gao <xiaosuo@gmail.com>

commit 504f85c9d05f7c605306e808f0d835fe11bfd18d upstream.

act_nat: use stack variable

structure tc_nat isn't too big for stack, so we can put it in stack.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sched/act_nat.c |   33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -261,40 +261,29 @@ static int tcf_nat_dump(struct sk_buff *
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_nat *p = a->priv;
-	struct tc_nat *opt;
+	struct tc_nat opt;
 	struct tcf_t t;
-	int s;
 
-	s = sizeof(*opt);
+	opt.old_addr = p->old_addr;
+	opt.new_addr = p->new_addr;
+	opt.mask = p->mask;
+	opt.flags = p->flags;
+
+	opt.index = p->tcf_index;
+	opt.action = p->tcf_action;
+	opt.refcnt = p->tcf_refcnt - ref;
+	opt.bindcnt = p->tcf_bindcnt - bind;
 
-	/* netlink spinlocks held above us - must use ATOMIC */
-	opt = kzalloc(s, GFP_ATOMIC);
-	if (unlikely(!opt))
-		return -ENOBUFS;
-
-	opt->old_addr = p->old_addr;
-	opt->new_addr = p->new_addr;
-	opt->mask = p->mask;
-	opt->flags = p->flags;
-
-	opt->index = p->tcf_index;
-	opt->action = p->tcf_action;
-	opt->refcnt = p->tcf_refcnt - ref;
-	opt->bindcnt = p->tcf_bindcnt - bind;
-
-	NLA_PUT(skb, TCA_NAT_PARMS, s, opt);
+	NLA_PUT(skb, TCA_NAT_PARMS, sizeof(opt), &opt);
 	t.install = jiffies_to_clock_t(jiffies - p->tcf_tm.install);
 	t.lastuse = jiffies_to_clock_t(jiffies - p->tcf_tm.lastuse);
 	t.expires = jiffies_to_clock_t(p->tcf_tm.expires);
 	NLA_PUT(skb, TCA_NAT_TM, sizeof(t), &t);
 
-	kfree(opt);
-
 	return skb->len;
 
 nla_put_failure:
 	nlmsg_trim(skb, b);
-	kfree(opt);
 	return -1;
 }
 

[123/127] net sched: fix some kernel memory leaks

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Eric Dumazet <eric.dumazet@gmail.com>

commit 1c40be12f7d8ca1d387510d39787b12e512a7ce8 upstream.

We leak at least 32bits of kernel memory to user land in tc dump,
because we dont init all fields (capab ?) of the dumped structure.

Use C99 initializers so that holes and non explicit fields are zeroed.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: dann frazier <dannf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 net/sched/act_gact.c    |   21 ++++++++++++---------
 net/sched/act_mirred.c  |   15 ++++++++-------
 net/sched/act_nat.c     |   22 +++++++++++-----------
 net/sched/act_simple.c  |   11 ++++++-----
 net/sched/act_skbedit.c |   11 ++++++-----
 5 files changed, 43 insertions(+), 37 deletions(-)

--- a/net/sched/act_gact.c
+++ b/net/sched/act_gact.c
@@ -152,21 +152,24 @@ static int tcf_gact(struct sk_buff *skb,
 static int tcf_gact_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref)
 {
 	unsigned char *b = skb_tail_pointer(skb);
-	struct tc_gact opt;
 	struct tcf_gact *gact = a->priv;
+	struct tc_gact opt = {
+		.index   = gact->tcf_index,
+		.refcnt  = gact->tcf_refcnt - ref,
+		.bindcnt = gact->tcf_bindcnt - bind,
+		.action  = gact->tcf_action,
+	};
 	struct tcf_t t;
 
-	opt.index = gact->tcf_index;
-	opt.refcnt = gact->tcf_refcnt - ref;
-	opt.bindcnt = gact->tcf_bindcnt - bind;
-	opt.action = gact->tcf_action;
 	NLA_PUT(skb, TCA_GACT_PARMS, sizeof(opt), &opt);
 #ifdef CONFIG_GACT_PROB
 	if (gact->tcfg_ptype) {
-		struct tc_gact_p p_opt;
-		p_opt.paction = gact->tcfg_paction;
-		p_opt.pval = gact->tcfg_pval;
-		p_opt.ptype = gact->tcfg_ptype;
+		struct tc_gact_p p_opt = {
+			.paction = gact->tcfg_paction,
+			.pval    = gact->tcfg_pval,
+			.ptype   = gact->tcfg_ptype,
+		};
+
 		NLA_PUT(skb, TCA_GACT_PROB, sizeof(p_opt), &p_opt);
 	}
 #endif
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -205,15 +205,16 @@ static int tcf_mirred_dump(struct sk_buf
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_mirred *m = a->priv;
-	struct tc_mirred opt;
+	struct tc_mirred opt = {
+		.index   = m->tcf_index,
+		.action  = m->tcf_action,
+		.refcnt  = m->tcf_refcnt - ref,
+		.bindcnt = m->tcf_bindcnt - bind,
+		.eaction = m->tcfm_eaction,
+		.ifindex = m->tcfm_ifindex,
+	};
 	struct tcf_t t;
 
-	opt.index = m->tcf_index;
-	opt.action = m->tcf_action;
-	opt.refcnt = m->tcf_refcnt - ref;
-	opt.bindcnt = m->tcf_bindcnt - bind;
-	opt.eaction = m->tcfm_eaction;
-	opt.ifindex = m->tcfm_ifindex;
 	NLA_PUT(skb, TCA_MIRRED_PARMS, sizeof(opt), &opt);
 	t.install = jiffies_to_clock_t(jiffies - m->tcf_tm.install);
 	t.lastuse = jiffies_to_clock_t(jiffies - m->tcf_tm.lastuse);
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -261,18 +261,18 @@ static int tcf_nat_dump(struct sk_buff *
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_nat *p = a->priv;
-	struct tc_nat opt;
-	struct tcf_t t;
-
-	opt.old_addr = p->old_addr;
-	opt.new_addr = p->new_addr;
-	opt.mask = p->mask;
-	opt.flags = p->flags;
+	struct tc_nat opt = {
+		.old_addr = p->old_addr,
+		.new_addr = p->new_addr,
+		.mask     = p->mask,
+		.flags    = p->flags,
 
-	opt.index = p->tcf_index;
-	opt.action = p->tcf_action;
-	opt.refcnt = p->tcf_refcnt - ref;
-	opt.bindcnt = p->tcf_bindcnt - bind;
+		.index    = p->tcf_index,
+		.action   = p->tcf_action,
+		.refcnt   = p->tcf_refcnt - ref,
+		.bindcnt  = p->tcf_bindcnt - bind,
+	};
+	struct tcf_t t;
 
 	NLA_PUT(skb, TCA_NAT_PARMS, sizeof(opt), &opt);
 	t.install = jiffies_to_clock_t(jiffies - p->tcf_tm.install);
--- a/net/sched/act_simple.c
+++ b/net/sched/act_simple.c
@@ -163,13 +163,14 @@ static inline int tcf_simp_dump(struct s
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_defact *d = a->priv;
-	struct tc_defact opt;
+	struct tc_defact opt = {
+		.index   = d->tcf_index,
+		.refcnt  = d->tcf_refcnt - ref,
+		.bindcnt = d->tcf_bindcnt - bind,
+		.action  = d->tcf_action,
+	};
 	struct tcf_t t;
 
-	opt.index = d->tcf_index;
-	opt.refcnt = d->tcf_refcnt - ref;
-	opt.bindcnt = d->tcf_bindcnt - bind;
-	opt.action = d->tcf_action;
 	NLA_PUT(skb, TCA_DEF_PARMS, sizeof(opt), &opt);
 	NLA_PUT_STRING(skb, TCA_DEF_DATA, d->tcfd_defdata);
 	t.install = jiffies_to_clock_t(jiffies - d->tcf_tm.install);
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_skbedit.c
@@ -147,13 +147,14 @@ static inline int tcf_skbedit_dump(struc
 {
 	unsigned char *b = skb_tail_pointer(skb);
 	struct tcf_skbedit *d = a->priv;
-	struct tc_skbedit opt;
+	struct tc_skbedit opt = {
+		.index   = d->tcf_index,
+		.refcnt  = d->tcf_refcnt - ref,
+		.bindcnt = d->tcf_bindcnt - bind,
+		.action  = d->tcf_action,
+	};
 	struct tcf_t t;
 
-	opt.index = d->tcf_index;
-	opt.refcnt = d->tcf_refcnt - ref;
-	opt.bindcnt = d->tcf_bindcnt - bind;
-	opt.action = d->tcf_action;
 	NLA_PUT(skb, TCA_SKBEDIT_PARMS, sizeof(opt), &opt);
 	if (d->flags & SKBEDIT_F_PRIORITY)
 		NLA_PUT(skb, TCA_SKBEDIT_PRIORITY, sizeof(d->priority),

[124/127] UV - XPC: pass nasid instead of nid to gru_create_message_queue

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Robin Holt <holt@sgi.com>

commit 57e6d258b1e41cd7ceb26fa43ce116939d8440b1 upstream.

Currently, the UV xpc code is passing nid to the gru_create_message_queue
instead of nasid as it expects.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/sgi-xp/xpc_uv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -203,6 +203,7 @@ xpc_create_gru_mq_uv(unsigned int mq_siz
 	enum xp_retval xp_ret;
 	int ret;
 	int nid;
+	int nasid;
 	int pg_order;
 	struct page *page;
 	struct xpc_gru_mq_uv *mq;
@@ -258,9 +259,11 @@ xpc_create_gru_mq_uv(unsigned int mq_siz
 		goto out_5;
 	}
 
+	nasid = UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpu));
+
 	mmr_value = (struct uv_IO_APIC_route_entry *)&mq->mmr_value;
 	ret = gru_create_message_queue(mq->gru_mq_desc, mq->address, mq_size,
-				       nid, mmr_value->vector, mmr_value->dest);
+				     nasid, mmr_value->vector, mmr_value->dest);
 	if (ret != 0) {
 		dev_err(xpc_part, "gru_create_message_queue() returned "
 			"error=%d\n", ret);

[125/127] x86: uv: XPC receive message reuse triggers invalid BUG_ON()

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Robin Holt <holt@sgi.com>

commit 046d6c563b1c6226bbf0f84e5b2413ad8ab921a1 upstream.

This was a difficult bug to trip.  XPC was in the middle of sending an
acknowledgement for a received message.

In xpc_received_payload_uv():
.
        ret = xpc_send_gru_msg(ch->sn.uv.cached_notify_gru_mq_desc, msg,
                               sizeof(struct xpc_notify_mq_msghdr_uv));
        if (ret != xpSuccess)
                XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);

        msg->hdr.msg_slot_number += ch->remote_nentries;

at the point in xpc_send_gru_msg() where the hardware has dispatched the
acknowledgement, the remote side is able to reuse the message structure
and send a message with a different slot number.  This problem is made
worse by interrupts.

The adjustment of msg_slot_number and the BUG_ON in
xpc_handle_notify_mq_msg_uv() which verifies the msg_slot_number is
consistent are only used for debug purposes.  Since a fix for this that
preserves the debug functionality would either have to infringe upon the
payload or allocate another structure just for debug, I decided to remove
it entirely.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/sgi-xp/xpc_uv.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1441,7 +1441,6 @@ xpc_handle_notify_mq_msg_uv(struct xpc_p
 	msg_slot = ch_uv->recv_msg_slots +
 	    (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size;
 
-	BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
 	BUG_ON(msg_slot->hdr.size != 0);
 
 	memcpy(msg_slot, msg, msg->hdr.size);
@@ -1665,8 +1664,6 @@ xpc_received_payload_uv(struct xpc_chann
 			       sizeof(struct xpc_notify_mq_msghdr_uv));
 	if (ret != xpSuccess)
 		XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
-
-	msg->hdr.msg_slot_number += ch->remote_nentries;
 }
 
 static struct xpc_arch_operations xpc_arch_ops_uv = {

[126/127] X86: uv: xpc_make_first_contact hang due to not accepting ACTIVE state

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Robin Holt <holt@sgi.com>

commit dbd2918ec65c35f36bb102c88eafe87be0552f6f upstream.

Many times while the initial connection is being made, the contacted
partition will send back both the ACTIVATING and the ACTIVE
remote_act_state changes in very close succescion.  The 1/4 second delay
in the make first contact loop is large enough to nearly always miss the
ACTIVATING state change.

Since either state indicates the remote partition has acknowledged our
state change, accept either.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/sgi-xp/xpc_uv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1038,7 +1038,8 @@ xpc_make_first_contact_uv(struct xpc_par
 	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
 				      XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
 
-	while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+	while (!((part->sn.uv.remote_act_state == XPC_P_AS_ACTIVATING) ||
+		 (part->sn.uv.remote_act_state == XPC_P_AS_ACTIVE))) {
 
 		dev_dbg(xpc_part, "waiting to make first contact with "
 			"partition %d\n", XPC_PARTID(part));

[127/127] x86: uv: xpc NULL deref when mesq becomes empty

[Greg KH]

2.6.32-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Robin Holt <holt@sgi.com>

commit 15b87d67ff3dc042bee42f991858d6b121b3b3ca upstream.

Under heavy load conditions, our set of xpc messages may become exhausted.
 The code handles this correctly with the exception of the management code
which hits a NULL pointer dereference.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/misc/sgi-xp/xpc_uv.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -965,11 +965,13 @@ xpc_get_fifo_entry_uv(struct xpc_fifo_he
 		head->first = first->next;
 		if (head->first == NULL)
 			head->last = NULL;
+
+		head->n_entries--;
+		BUG_ON(head->n_entries < 0);
+
+		first->next = NULL;
 	}
-	head->n_entries--;
-	BUG_ON(head->n_entries < 0);
 	spin_unlock_irqrestore(&head->lock, irq_flags);
-	first->next = NULL;
 	return first;
 }