* buggy perf callgraph output
@ 2010-12-08 16:40 Nick Piggin
2010-12-08 21:48 ` Frederic Weisbecker
0 siblings, 1 reply; 8+ messages in thread
From: Nick Piggin @ 2010-12-08 16:40 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo; +Cc: linux-kernel
Hi,
I get strange looking perf output with the callchain hits not sorted
properly for graph and fractal:
7.34% open [kernel.kallsyms] [k] kmem_cache_alloc
|
--- kmem_cache_alloc
|
|---0.05%-- get_empty_filp
| do_filp_open
| do_sys_open
| sys_open
| system_call
| __open_nocancel
|
---0.16%-- getname
do_sys_open
sys_open
system_call
__open_nocancel
6.17% open [kernel.kallsyms] [k] _raw_spin_lock
|
--- _raw_spin_lock
|
|---0.01%-- add_partial
| __slab_free
| kmem_cache_free
| file_free_rcu
| __rcu_process_callbacks
| rcu_process_callbacks
| __do_softirq
| call_softirq
| do_softirq
| irq_exit
| smp_apic_timer_interrupt
| apic_timer_interrupt
|
|---0.16%-- dput
| |
| --0.57%-- fput
| filp_close
| sys_close
| system_call
| __libc_close
|
|--0.60%-- link_path_walk
| do_path_lookup
| do_filp_open
| do_sys_open
| sys_open
| system_call
| __open_nocancel
|
|--0.57%-- __slab_free
| kmem_cache_free
| file_free_rcu
| __rcu_process_callbacks
| rcu_process_callbacks
| __do_softirq
With flat it looks a bit better:
7.34% open [kernel.kallsyms] [k] kmem_cache_alloc
6.09%
kmem_cache_alloc
get_empty_filp
do_filp_open
do_sys_open
sys_open
system_call
__open_nocancel
1.07%
kmem_cache_alloc
getname
do_sys_open
sys_open
system_call
__open_nocancel
6.17% open [kernel.kallsyms] [k] _raw_spin_lock
0.60%
_raw_spin_lock
link_path_walk
do_path_lookup
do_filp_open
do_sys_open
sys_open
system_call
__open_nocancel
0.57%
_raw_spin_lock
fd_install
do_sys_open
sys_open
system_call
__open_nocancel
0.57%
_raw_spin_lock
dput
fput
filp_close
sys_close
system_call
__libc_close
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-08 16:40 buggy perf callgraph output Nick Piggin
@ 2010-12-08 21:48 ` Frederic Weisbecker
2010-12-15 13:02 ` Nick Piggin
0 siblings, 1 reply; 8+ messages in thread
From: Frederic Weisbecker @ 2010-12-08 21:48 UTC (permalink / raw)
To: Nick Piggin; +Cc: Arnaldo Carvalho de Melo, linux-kernel
On Thu, Dec 09, 2010 at 03:40:15AM +1100, Nick Piggin wrote:
> Hi,
>
> I get strange looking perf output with the callchain hits not sorted
> properly for graph and fractal:
>
> 7.34% open [kernel.kallsyms] [k] kmem_cache_alloc
> |
> --- kmem_cache_alloc
> |
> |---0.05%-- get_empty_filp
> | do_filp_open
> | do_sys_open
> | sys_open
> | system_call
> | __open_nocancel
> |
> ---0.16%-- getname
> do_sys_open
> sys_open
> system_call
> __open_nocancel
>
> 6.17% open [kernel.kallsyms] [k] _raw_spin_lock
> |
> --- _raw_spin_lock
> |
> |---0.01%-- add_partial
> | __slab_free
> | kmem_cache_free
> | file_free_rcu
> | __rcu_process_callbacks
> | rcu_process_callbacks
> | __do_softirq
> | call_softirq
> | do_softirq
> | irq_exit
> | smp_apic_timer_interrupt
> | apic_timer_interrupt
> |
> |---0.16%-- dput
> | |
> | --0.57%-- fput
> | filp_close
> | sys_close
> | system_call
> | __libc_close
> |
> |--0.60%-- link_path_walk
> | do_path_lookup
> | do_filp_open
> | do_sys_open
> | sys_open
> | system_call
> | __open_nocancel
> |
> |--0.57%-- __slab_free
> | kmem_cache_free
> | file_free_rcu
> | __rcu_process_callbacks
> | rcu_process_callbacks
> | __do_softirq
>
>
> With flat it looks a bit better:
> 7.34% open [kernel.kallsyms] [k] kmem_cache_alloc
> 6.09%
> kmem_cache_alloc
> get_empty_filp
> do_filp_open
> do_sys_open
> sys_open
> system_call
> __open_nocancel
>
> 1.07%
> kmem_cache_alloc
> getname
> do_sys_open
> sys_open
> system_call
> __open_nocancel
>
> 6.17% open [kernel.kallsyms] [k] _raw_spin_lock
> 0.60%
> _raw_spin_lock
> link_path_walk
> do_path_lookup
> do_filp_open
> do_sys_open
> sys_open
> system_call
> __open_nocancel
>
> 0.57%
> _raw_spin_lock
> fd_install
> do_sys_open
> sys_open
> system_call
> __open_nocancel
>
> 0.57%
> _raw_spin_lock
> dput
> fput
> filp_close
> sys_close
> system_call
> __libc_close
I can not reproduce it. Could you please try to reproduce,
run perf archive and send me your perf.data.tar.bz2 ?
Thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-08 21:48 ` Frederic Weisbecker
@ 2010-12-15 13:02 ` Nick Piggin
2010-12-16 11:47 ` Frederic Weisbecker
0 siblings, 1 reply; 8+ messages in thread
From: Nick Piggin @ 2010-12-15 13:02 UTC (permalink / raw)
To: Frederic Weisbecker; +Cc: Nick Piggin, Arnaldo Carvalho de Melo, linux-kernel
On Wed, Dec 08, 2010 at 10:48:13PM +0100, Frederic Weisbecker wrote:
> I can not reproduce it. Could you please try to reproduce,
> run perf archive and send me your perf.data.tar.bz2 ?
It seems to be happening all the time, just look further in
callgraphs.
This attached perf.data.bz2 looks like this, when using -g graph
15.05% dbench [kernel.kallsyms] [k]
copy_user_generic_string
|
--- copy_user_generic_string
|
|---0.16%-- generic_file_aio_read
| do_sync_read
| vfs_read
| |
| --0.05%-- sys_pread64
| system_call
| 0x7f64a60bb193
|
|--0.10%-- generic_file_buffered_write
| __generic_file_aio_write
| generic_file_aio_write
| do_sync_write
| vfs_write
| sys_pwrite64
| system_call
| 0x7f64a60bb203
| 0xe01170
|
---0.11%-- dcache_readdir
vfs_readdir
sys_getdents
system_call
0x7f64a60ade65
See, the last element is greater than the second last.
-g fractal looks like this:
15.05% dbench [kernel.kallsyms] [k]
copy_user_generic_string
|
--- copy_user_generic_string
|
|---1.09%-- generic_file_aio_read
| do_sync_read
| vfs_read
| |
| |--0.55%-- sys_pread64
| | system_call
| | 0x7f64a60bb193
| |
| --2.19%-- sys_read
| system_call
| 0x7f64a60d3ea0
|
|--0.69%-- generic_file_buffered_write
| __generic_file_aio_write
| generic_file_aio_write
| do_sync_write
| vfs_write
| sys_pwrite64
| system_call
| 0x7f64a60bb203
| 0xe01170
|
|---0.72%-- dcache_readdir
| vfs_readdir
| sys_getdents
| system_call
| 0x7f64a60ade65
So it's totally screwy.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-15 13:02 ` Nick Piggin
@ 2010-12-16 11:47 ` Frederic Weisbecker
2010-12-17 5:32 ` Nick Piggin
0 siblings, 1 reply; 8+ messages in thread
From: Frederic Weisbecker @ 2010-12-16 11:47 UTC (permalink / raw)
To: Nick Piggin; +Cc: Arnaldo Carvalho de Melo, linux-kernel
On Thu, Dec 16, 2010 at 12:02:45AM +1100, Nick Piggin wrote:
> On Wed, Dec 08, 2010 at 10:48:13PM +0100, Frederic Weisbecker wrote:
> > I can not reproduce it. Could you please try to reproduce,
> > run perf archive and send me your perf.data.tar.bz2 ?
>
> It seems to be happening all the time, just look further in
> callgraphs.
>
> This attached perf.data.bz2 looks like this, when using -g graph
>
> 15.05% dbench [kernel.kallsyms] [k]
> copy_user_generic_string
> |
> --- copy_user_generic_string
> |
> |---0.16%-- generic_file_aio_read
> | do_sync_read
> | vfs_read
> | |
> | --0.05%-- sys_pread64
> | system_call
> | 0x7f64a60bb193
> |
> |--0.10%-- generic_file_buffered_write
> | __generic_file_aio_write
> | generic_file_aio_write
> | do_sync_write
> | vfs_write
> | sys_pwrite64
> | system_call
> | 0x7f64a60bb203
> | 0xe01170
> |
> ---0.11%-- dcache_readdir
> vfs_readdir
> sys_getdents
> system_call
> 0x7f64a60ade65
>
> See, the last element is greater than the second last.
>
> -g fractal looks like this:
>
> 15.05% dbench [kernel.kallsyms] [k]
> copy_user_generic_string
> |
> --- copy_user_generic_string
> |
> |---1.09%-- generic_file_aio_read
> | do_sync_read
> | vfs_read
> | |
> | |--0.55%-- sys_pread64
> | | system_call
> | | 0x7f64a60bb193
> | |
> | --2.19%-- sys_read
> | system_call
> | 0x7f64a60d3ea0
> |
> |--0.69%-- generic_file_buffered_write
> | __generic_file_aio_write
> | generic_file_aio_write
> | do_sync_write
> | vfs_write
> | sys_pwrite64
> | system_call
> | 0x7f64a60bb203
> | 0xe01170
> |
> |---0.72%-- dcache_readdir
> | vfs_readdir
> | sys_getdents
> | system_call
> | 0x7f64a60ade65
>
>
> So it's totally screwy.
First time I see this.
I can reproduce but differently because I miss your perf.data.tar.bz2
that results after the "perf archive" command, then the chains are based
on addresses and not on symbols.
But I found one of these problems on your file even without the symbols:
--- 0x8152b50e
|
|---6.54%-- 0x810e83a7
| 0x810d8590
| 0x810d8710
| 0x81002cbb
| 0xa60ade65
|
|--13.76%-- 0x810dbc9f
| |
| |--44.73%-- 0x810d1ff5
| | |
| | |--38.87%-- 0x810d44c4
| | | 0x810d5242
| | | |
| | | |--82.03%-- 0x810d5f12
| | | | 0x810cbfd7
| | | | 0x810cc046
| | | | 0x810cc1ff
| | | | 0x81002cbb
| | | | 0xa60d37f5
| | | | |
| | | | |--86.66%-- 0xe01170
| | | | |
| | | | --13.34%-- 0x6c632f73
| | | |
| | | --17.97%-- 0x810d629f
| | | 0x810c63a3
| | | 0x810c648b
| | | 0x81002cbb
| | | 0xa60d3cb0
These are not the two last on the chain so it seems to happen even more
randomly.
I'll fix that, thanks!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-16 11:47 ` Frederic Weisbecker
@ 2010-12-17 5:32 ` Nick Piggin
2010-12-23 12:55 ` Frederic Weisbecker
0 siblings, 1 reply; 8+ messages in thread
From: Nick Piggin @ 2010-12-17 5:32 UTC (permalink / raw)
To: Frederic Weisbecker; +Cc: Nick Piggin, Arnaldo Carvalho de Melo, linux-kernel
On Thu, Dec 16, 2010 at 12:47:58PM +0100, Frederic Weisbecker wrote:
> On Thu, Dec 16, 2010 at 12:02:45AM +1100, Nick Piggin wrote:
> > On Wed, Dec 08, 2010 at 10:48:13PM +0100, Frederic Weisbecker wrote:
> > > I can not reproduce it. Could you please try to reproduce,
> > > run perf archive and send me your perf.data.tar.bz2 ?
> >
> > It seems to be happening all the time, just look further in
> > callgraphs.
> >
> > This attached perf.data.bz2 looks like this, when using -g graph
> >
> > 15.05% dbench [kernel.kallsyms] [k]
> > copy_user_generic_string
> > |
> > --- copy_user_generic_string
> > |
> > |---0.16%-- generic_file_aio_read
> > | do_sync_read
> > | vfs_read
> > | |
> > | --0.05%-- sys_pread64
> > | system_call
> > | 0x7f64a60bb193
> > |
> > |--0.10%-- generic_file_buffered_write
> > | __generic_file_aio_write
> > | generic_file_aio_write
> > | do_sync_write
> > | vfs_write
> > | sys_pwrite64
> > | system_call
> > | 0x7f64a60bb203
> > | 0xe01170
> > |
> > ---0.11%-- dcache_readdir
> > vfs_readdir
> > sys_getdents
> > system_call
> > 0x7f64a60ade65
> >
> > See, the last element is greater than the second last.
> >
> > -g fractal looks like this:
> >
> > 15.05% dbench [kernel.kallsyms] [k]
> > copy_user_generic_string
> > |
> > --- copy_user_generic_string
> > |
> > |---1.09%-- generic_file_aio_read
> > | do_sync_read
> > | vfs_read
> > | |
> > | |--0.55%-- sys_pread64
> > | | system_call
> > | | 0x7f64a60bb193
> > | |
> > | --2.19%-- sys_read
> > | system_call
> > | 0x7f64a60d3ea0
> > |
> > |--0.69%-- generic_file_buffered_write
> > | __generic_file_aio_write
> > | generic_file_aio_write
> > | do_sync_write
> > | vfs_write
> > | sys_pwrite64
> > | system_call
> > | 0x7f64a60bb203
> > | 0xe01170
> > |
> > |---0.72%-- dcache_readdir
> > | vfs_readdir
> > | sys_getdents
> > | system_call
> > | 0x7f64a60ade65
> >
> >
> > So it's totally screwy.
>
>
> First time I see this.
>
> I can reproduce but differently because I miss your perf.data.tar.bz2
> that results after the "perf archive" command, then the chains are based
> on addresses and not on symbols.
Oh I didn't realize perf archive, noted for next time, thanks.
> But I found one of these problems on your file even without the symbols:
>
> --- 0x8152b50e
> |
> |---6.54%-- 0x810e83a7
> | 0x810d8590
> | 0x810d8710
> | 0x81002cbb
> | 0xa60ade65
> |
> |--13.76%-- 0x810dbc9f
> | |
> | |--44.73%-- 0x810d1ff5
> | | |
> | | |--38.87%-- 0x810d44c4
> | | | 0x810d5242
> | | | |
> | | | |--82.03%-- 0x810d5f12
> | | | | 0x810cbfd7
> | | | | 0x810cc046
> | | | | 0x810cc1ff
> | | | | 0x81002cbb
> | | | | 0xa60d37f5
> | | | | |
> | | | | |--86.66%-- 0xe01170
> | | | | |
> | | | | --13.34%-- 0x6c632f73
> | | | |
> | | | --17.97%-- 0x810d629f
> | | | 0x810c63a3
> | | | 0x810c648b
> | | | 0x81002cbb
> | | | 0xa60d3cb0
>
> These are not the two last on the chain so it seems to happen even more
> randomly.
>
> I'll fix that, thanks!
That would be great, thanks! It's a really awesome tool, I appreciate
your effort on it.
Thanks,
Nick
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-17 5:32 ` Nick Piggin
@ 2010-12-23 12:55 ` Frederic Weisbecker
2010-12-23 13:08 ` Ingo Molnar
0 siblings, 1 reply; 8+ messages in thread
From: Frederic Weisbecker @ 2010-12-23 12:55 UTC (permalink / raw)
To: Nick Piggin; +Cc: Arnaldo Carvalho de Melo, linux-kernel
On Fri, Dec 17, 2010 at 04:32:58PM +1100, Nick Piggin wrote:
> That would be great, thanks! It's a really awesome tool, I appreciate
> your effort on it.
Thanks :)
So the below patch should fix the issue. Tell me if you encounter it
again, or anything else.
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index d503670..c749ba6 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -356,7 +356,7 @@ static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
int depth, int depth_mask, int period,
- u64 total_samples, int hits,
+ u64 total_samples, u64 hits,
int left_margin)
{
int i;
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-23 12:55 ` Frederic Weisbecker
@ 2010-12-23 13:08 ` Ingo Molnar
2010-12-23 13:35 ` Frederic Weisbecker
0 siblings, 1 reply; 8+ messages in thread
From: Ingo Molnar @ 2010-12-23 13:08 UTC (permalink / raw)
To: Frederic Weisbecker; +Cc: Nick Piggin, Arnaldo Carvalho de Melo, linux-kernel
* Frederic Weisbecker <fweisbec@gmail.com> wrote:
> On Fri, Dec 17, 2010 at 04:32:58PM +1100, Nick Piggin wrote:
> > That would be great, thanks! It's a really awesome tool, I appreciate
> > your effort on it.
>
> Thanks :)
>
> So the below patch should fix the issue. Tell me if you encounter it
> again, or anything else.
>
> diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
> index d503670..c749ba6 100644
> --- a/tools/perf/util/hist.c
> +++ b/tools/perf/util/hist.c
> @@ -356,7 +356,7 @@ static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
>
> static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
> int depth, int depth_mask, int period,
> - u64 total_samples, int hits,
> + u64 total_samples, u64 hits,
> int left_margin)
Hmm ... nice fix but why didnt GCC warn about the loss of half of the 'cumul' bits
in this call:
ret += ipchain__fprintf_graph(fp, chain, depth,
new_depth_mask, i++,
new_total,
cumul,
left_margin);
We really, really want GCC to warn about this - it's such a common mistake. What
disabled that warning? Very weird.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: buggy perf callgraph output
2010-12-23 13:08 ` Ingo Molnar
@ 2010-12-23 13:35 ` Frederic Weisbecker
0 siblings, 0 replies; 8+ messages in thread
From: Frederic Weisbecker @ 2010-12-23 13:35 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Nick Piggin, Arnaldo Carvalho de Melo, linux-kernel
On Thu, Dec 23, 2010 at 02:08:20PM +0100, Ingo Molnar wrote:
>
> * Frederic Weisbecker <fweisbec@gmail.com> wrote:
>
> > On Fri, Dec 17, 2010 at 04:32:58PM +1100, Nick Piggin wrote:
> > > That would be great, thanks! It's a really awesome tool, I appreciate
> > > your effort on it.
> >
> > Thanks :)
> >
> > So the below patch should fix the issue. Tell me if you encounter it
> > again, or anything else.
> >
> > diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
> > index d503670..c749ba6 100644
> > --- a/tools/perf/util/hist.c
> > +++ b/tools/perf/util/hist.c
> > @@ -356,7 +356,7 @@ static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
> >
> > static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
> > int depth, int depth_mask, int period,
> > - u64 total_samples, int hits,
> > + u64 total_samples, u64 hits,
> > int left_margin)
>
> Hmm ... nice fix but why didnt GCC warn about the loss of half of the 'cumul' bits
> in this call:
>
> ret += ipchain__fprintf_graph(fp, chain, depth,
> new_depth_mask, i++,
> new_total,
> cumul,
> left_margin);
>
> We really, really want GCC to warn about this - it's such a common mistake. What
> disabled that warning? Very weird.
No idea. I thought perf had that in its warning arsenal :)
>
> Thanks,
>
> Ingo
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-12-23 13:38 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-08 16:40 buggy perf callgraph output Nick Piggin
2010-12-08 21:48 ` Frederic Weisbecker
2010-12-15 13:02 ` Nick Piggin
2010-12-16 11:47 ` Frederic Weisbecker
2010-12-17 5:32 ` Nick Piggin
2010-12-23 12:55 ` Frederic Weisbecker
2010-12-23 13:08 ` Ingo Molnar
2010-12-23 13:35 ` Frederic Weisbecker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).