From: Andres Salomon <dilinger@queued.net>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, linux-geode@lists.infradead.org,
dsd@laptop.org, pgf@laptop.org
Subject: Re: [PATCH 1/2] cs5535-gpio: don't apply errata #36 to edge detect GPIOs
Date: Fri, 17 Dec 2010 18:09:48 -0800 [thread overview]
Message-ID: <20101217180948.66ed5eef@queued.net> (raw)
In-Reply-To: <20101215112807.2c85e991@queued.net>
Note: these two patches fix problems with commit 853ff883, so they
should definitely go in for 3.6.37.
On Wed, 15 Dec 2010 11:28:07
-0800 Andres Salomon <dilinger@queued.net> wrote:
>
> The edge detect status GPIOs function differently from the other
> atomic model CS5536 GPIO registers; writing 1 to the high bits clears
> the GPIO, but writing 1 to the lower bits also clears the bit. This
> means that read-modify-write doesn't actually work for it, so don't
> apply the errata here. If a negative edge status gets lost after
> resume.. well, we tried our best!
>
> Signed-off-by: Andres Salomon <dilinger@queued.net>
> Tested-by: Daniel Drake <dsd@laptop.org>
> ---
> drivers/gpio/cs5535-gpio.c | 15 +++++++++++----
> 1 files changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
> index 599f6c9..79eb9c5 100644
> --- a/drivers/gpio/cs5535-gpio.c
> +++ b/drivers/gpio/cs5535-gpio.c
> @@ -56,15 +56,22 @@ static struct cs5535_gpio_chip {
> * registers, see include/linux/cs5535.h.
> */
>
> -static void errata_outl(u32 val, unsigned long addr)
> +static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
> + unsigned int reg)
> {
> + unsigned long addr = chip->base + 0x80 + reg;
> +
> /*
> * According to the CS5536 errata (#36), after suspend
> * a write to the high bank GPIO register will clear all
> * non-selected bits; the recommended workaround is a
> * read-modify-write operation.
> + *
> + * Don't apply this errata to the edge status GPIOs, as
> writing
> + * to their lower bits will clear them.
> */
> - val |= inl(addr);
> + if (reg != GPIO_POSITIVE_EDGE_STS && reg !=
> GPIO_NEGATIVE_EDGE_STS)
> + val |= inl(addr);
> outl(val, addr);
> }
>
> @@ -76,7 +83,7 @@ static void __cs5535_gpio_set(struct
> cs5535_gpio_chip *chip, unsigned offset, outl(1 << offset, chip->base
> + reg); else
> /* high bank register */
> - errata_outl(1 << (offset - 16), chip->base + 0x80 +
> reg);
> + errata_outl(chip, 1 << (offset - 16), reg);
> }
>
> void cs5535_gpio_set(unsigned offset, unsigned int reg)
> @@ -98,7 +105,7 @@ static void __cs5535_gpio_clear(struct
> cs5535_gpio_chip *chip, unsigned offset, outl(1 << (offset + 16),
> chip->base + reg); else
> /* high bank register */
> - errata_outl(1 << offset, chip->base + 0x80 + reg);
> + errata_outl(chip, 1 << offset, reg);
> }
>
> void cs5535_gpio_clear(unsigned offset, unsigned int reg)
next prev parent reply other threads:[~2010-12-18 2:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-15 19:28 [PATCH 1/2] cs5535-gpio: don't apply errata #36 to edge detect GPIOs Andres Salomon
2010-12-18 2:09 ` Andres Salomon [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-12-21 21:04 Andres Salomon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101217180948.66ed5eef@queued.net \
--to=dilinger@queued.net \
--cc=akpm@linux-foundation.org \
--cc=dsd@laptop.org \
--cc=linux-geode@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pgf@laptop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox