From: "Henrik Rydberg" <rydberg@euromail.se>
To: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>
Subject: Re: [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices
Date: Sat, 18 Dec 2010 10:37:19 +0100 [thread overview]
Message-ID: <20101218093719.GA1493@polaris.bitmath.org> (raw)
In-Reply-To: <20101218042320.GA14104@ericsson.com>
On Fri, Dec 17, 2010 at 08:23:21PM -0800, Guenter Roeck wrote:
> On Fri, Dec 17, 2010 at 05:24:20PM -0500, Matthew Garrett wrote:
> > The AppleSMC device is described in ACPI, including a list of its resources.
> > We should use those rather than hardcoding the ports. A side-effect is that
> > we can then remove the DMI matching, since there's a unique identifier to
> > indicate that the machine has one of these devices.
> >
> > Signed-off-by: Matthew Garrett <mjg@redhat.com>
>
> You added a whitespace error, and kfree() is safe and doesn't need a check.
> I fixed those, so no need to resubmit. If Henrik gives his Ack we are ready to go.
Ok, although the idea is interesting, it seems this patch will need
some reworking and testing. I tested the patches on a recent
MacBookAir3,1, and i get this:
[ 1.211182] Pid: 779, comm: modprobe Not tainted 2.6.37-rc5+ #280 Mac-942452F5819B1C1B/MacBookAir3,1
[ 1.211282] RIP: 0010:[<ffffffff811259b9>] [<ffffffff811259b9>] sysfs_create_file+0x9/0x30
[ 1.211424] RSP: 0018:ffff88007f1e7d48 EFLAGS: 00010202
[ 1.211498] RAX: 0000000000000124 RBX: ffff88006bd58540 RCX: 0000000000000004
[ 1.211575] RDX: 0000000000000004 RSI: ffff88006bd58540 RDI: 0000000000000010
[ 1.211653] RBP: ffffffffa000b040 R08: 0000000000000000 R09: ffff88006bd58540
[ 1.211731] R10: 0000000000000001 R11: 00000000ffffffff R12: 0000000000000001
[ 1.211808] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88006bd58568
[ 1.211886] FS: 00007fbe4a458700(0000) GS:ffff88006ec00000(0000) knlGS:0000000000000000
[ 1.211984] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1.212007] CR2: 0000000000000040 CR3: 0000000069de9000 CR4: 00000000000406b0
[ 1.212007] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.212007] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.212007] Process modprobe (pid: 779, threadinfo ffff88007f1e6000, task ffff88006bd38000)
[ 1.212007] Stack:
[ 1.212007] 0000000000405056 ffffffffa0009ecc 0000000000405056 ffffffff8139b969
[ 1.212517] 0000000100000030 0000000000000010 ffffffffa000b040 0000000000000090
[ 1.212517] 0000000000000125 0000000000000000 0000000000000000 ffffffffa000ad60
[ 1.212517] Call Trace:
[ 1.212517] [<ffffffffa0009ecc>] ? applesmc_create_nodes+0x13c/0x170 [applesmc]
[ 1.212517] [<ffffffff8139b969>] ? printk+0x40/0x45
[ 1.212517] [<ffffffffa000a89f>] ? applesmc_pnp_probe+0x529/0x56a [applesmc]
[ 1.212517] [<ffffffff81222ede>] ? compare_pnp_id+0x1e/0xf0
[ 1.212517] [<ffffffffa000a376>] ? applesmc_pnp_probe+0x0/0x56a [applesmc]
[ 1.212517] [<ffffffff8122307f>] ? pnp_device_probe+0x6f/0xe0
[ 1.212517] [<ffffffff8126a342>] ? driver_sysfs_add+0x72/0xa0
[ 1.212517] [<ffffffff8126a5d7>] ? driver_probe_device+0x87/0x1a0
[ 1.212517] [<ffffffff8126a783>] ? __driver_attach+0x93/0xa0
[ 1.212517] [<ffffffff8126a6f0>] ? __driver_attach+0x0/0xa0
[ 1.212517] [<ffffffff812695cd>] ? bus_for_each_dev+0x4d/0x80
[ 1.212517] [<ffffffff81269ea8>] ? bus_add_driver+0x158/0x2d0
[ 1.212517] [<ffffffffa000e000>] ? applesmc_init+0x0/0x14 [applesmc]
[ 1.212517] [<ffffffff8126a9dc>] ? driver_register+0x6c/0x130
[ 1.212517] [<ffffffffa000e000>] ? applesmc_init+0x0/0x14 [applesmc]
[ 1.212517] [<ffffffff810002ca>] ? do_one_initcall+0x3a/0x170
[ 1.212517] [<ffffffff8106f8a9>] ? sys_init_module+0xb9/0x200
[ 1.212517] [<ffffffff810023bb>] ? system_call_fastpath+0x16/0x1b
[ 1.212517] Code: 8b 03 85 c0 74 05 f0 ff 03 eb 9d be b7 00 00 00 48 c7 c7 e7 4e 46 81 e8 06 2b f1 ff eb e8 0f 1f 40 00 48 83 ec 08 48 85 ff 74 1c <48> 8b 7f 30 48 85 f6 74 13 48 85 ff 74 0e ba 02 00 00 00 48 83
[ 1.212517] RIP [<ffffffff811259b9>] sysfs_create_file+0x9/0x30
[ 1.212517] RSP <ffff88007f1e7d48>
[ 1.212517] CR2: 0000000000000040
[ 1.218078] ---[ end trace ad091051b87fc759 ]---
So where to attach the sysfs nodes... There is also a userspace issue
here, since a lot of applications are hard-wired to
/sys/devices/platform/applesmc.768/.
Thanks,
Henrik
next prev parent reply other threads:[~2010-12-18 9:37 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-16 15:33 [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-16 15:33 ` [PATCH 2/2] applesmc: Perform some more sanity checking on temperatures Matthew Garrett
2010-12-16 16:48 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-16 17:00 ` Matthew Garrett
2010-12-16 17:00 ` [lm-sensors] " Guenter Roeck
2010-12-17 21:57 ` Matthew Garrett
2010-12-17 21:58 ` Matthew Garrett
2010-12-17 22:16 ` Guenter Roeck
2010-12-17 22:22 ` Matthew Garrett
2010-12-17 22:24 ` [PATCH 1/2 V3] " Matthew Garrett
2010-12-18 4:23 ` Guenter Roeck
2010-12-18 9:07 ` Henrik Rydberg
2010-12-18 14:40 ` Matthew Garrett
2010-12-18 15:31 ` Henrik Rydberg
2010-12-18 9:37 ` Henrik Rydberg [this message]
2010-12-18 10:09 ` [lm-sensors] " Jean Delvare
2010-12-18 10:31 ` Henrik Rydberg
2010-12-18 11:29 ` Julien BLACHE
2010-12-18 11:57 ` Henrik Rydberg
2010-12-20 13:44 ` Mikael Ström
2010-12-20 13:57 ` Jean Delvare
2010-12-20 14:23 ` Henrik Rydberg
2010-12-20 14:28 ` Matthew Garrett
2010-12-20 15:06 ` Henrik Rydberg
2010-12-20 15:12 ` Matthew Garrett
2010-12-20 15:37 ` Henrik Rydberg
2010-12-20 14:00 ` Matthew Garrett
2010-12-21 6:04 ` Mikael Ström
2010-12-21 11:09 ` Julien BLACHE
2010-12-18 14:43 ` Matthew Garrett
2010-12-18 15:30 ` Henrik Rydberg
2010-12-18 15:39 ` Matthew Garrett
2010-12-17 22:24 ` [PATCH 2/2 V3] applesmc: Perform some more sanity checking on temperatures Matthew Garrett
2010-12-17 21:58 ` [PATCH 2/2] " Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101218093719.GA1493@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=guenter.roeck@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mjg@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox