From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Suresh Siddha <suresh.b.siddha@intel.com>,
Chris Wright <chrisw@sous-sol.org>,
"H. Peter Anvin" <hpa@linux.intel.com>
Subject: [26/49] x86: Enable the intr-remap fault handling after local APIC setup
Date: Wed, 05 Jan 2011 15:00:44 -0800 [thread overview]
Message-ID: <20110105230326.068443369@clark.site> (raw)
In-Reply-To: <20110105230438.GA26241@kroah.com>
2.6.32-longterm review patch. If anyone has any objections, please let us know.
------------------
From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
commit 7f7fbf45c6b748074546f7f16b9488ca71de99c1 upstream.
Interrupt-remapping gets enabled very early in the boot, as it determines the
apic mode that the processor can use. And the current code enables the vt-d
fault handling before the setup_local_APIC(). And hence the APIC LDR registers
and data structure in the memory may not be initialized. So the vt-d fault
handling in logical xapic/x2apic modes were broken.
Fix this by enabling the vt-d fault handling in the end_local_APIC_setup()
A cleaner fix of enabling fault handling while enabling intr-remapping
will be addressed for v2.6.38. [ Enabling intr-remapping determines the
usage of x2apic mode and the apic mode determines the fault-handling
configuration. ]
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
LKML-Reference: <20101201062244.541996375@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/x86/kernel/apic/apic.c | 8 ++++++++
arch/x86/kernel/apic/probe_64.c | 7 -------
2 files changed, 8 insertions(+), 7 deletions(-)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1361,6 +1361,14 @@ void __cpuinit end_local_APIC_setup(void
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
+
+ /*
+ * Now that local APIC setup is completed for BP, configure the fault
+ * handling for interrupt remapping.
+ */
+ if (!smp_processor_id() && intr_remapping_enabled)
+ enable_drhd_fault_handling();
+
}
#ifdef CONFIG_X86_X2APIC
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -76,13 +76,6 @@ void __init default_setup_apic_routing(v
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
-
- /*
- * Now that apic routing model is selected, configure the
- * fault handling for intr remapping.
- */
- if (intr_remapping_enabled)
- enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
next prev parent reply other threads:[~2011-01-05 23:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-05 23:04 [00/49] 2.6.32.28-longterm review Greg KH
2011-01-05 23:00 ` Greg KH
2011-01-05 23:00 ` [01/49] TTY: Fix error return from tty_ldisc_open() Greg KH
2011-01-05 23:00 ` [02/49] x86, hotplug: Use mwait to offline a processor, fix the legacy case Greg KH
2011-01-05 23:00 ` [03/49] fuse: verify ioctl retries Greg KH
2011-01-05 23:00 ` [04/49] fuse: fix ioctl when server is 32bit Greg KH
2011-01-05 23:00 ` [05/49] ALSA: hda: Use model=lg quirk for LG P1 Express to enable playback and capture Greg KH
2011-01-05 23:00 ` [06/49] drm/kms: remove spaces from connector names (v2) Greg KH
2011-01-05 23:49 ` [Stable-review] " Ben Hutchings
2011-01-05 23:56 ` Greg KH
2011-01-06 0:04 ` Ben Hutchings
2011-01-06 0:32 ` Alex Deucher
2011-01-05 23:00 ` [07/49] nohz: Fix printk_needs_cpu() return value on offline cpus Greg KH
2011-01-05 23:00 ` [08/49] nohz: Fix get_next_timer_interrupt() vs cpu hotplug Greg KH
2011-01-05 23:00 ` [09/49] NFS: Fix panic after nfs_umount() Greg KH
2011-01-05 23:00 ` [10/49] nfsd: Fix possible BUG_ON firing in set_change_info Greg KH
2011-01-05 23:00 ` [11/49] NFS: Fix fcntl F_GETLK not reporting some conflicts Greg KH
2011-01-05 23:00 ` [12/49] sunrpc: prevent use-after-free on clearing XPT_BUSY Greg KH
2011-01-05 23:00 ` [13/49] hwmon: (adm1026) Allow 1 as a valid divider value Greg KH
2011-01-05 23:00 ` [14/49] hwmon: (adm1026) Fix setting fan_div Greg KH
2011-01-05 23:00 ` [15/49] amd64_edac: Fix interleaving check Greg KH
2011-01-05 23:00 ` [16/49] IB/uverbs: Handle large number of entries in poll CQ Greg KH
2011-01-05 23:00 ` [17/49] PM / Hibernate: Fix PM_POST_* notification with user-space suspend Greg KH
2011-01-05 23:00 ` [18/49] ACPICA: Fix Scope() op in module level code Greg KH
2011-01-05 23:00 ` [19/49] ACPI: EC: Add another dmi match entry for MSI hardware Greg KH
2011-01-05 23:00 ` [20/49] orinoco: fix TKIP countermeasure behaviour Greg KH
2011-01-05 23:00 ` [21/49] orinoco: clear countermeasure setting on commit Greg KH
2011-01-05 23:00 ` [22/49] x86, amd: Fix panic on AMD CPU family 0x15 Greg KH
2011-01-05 23:00 ` [23/49] md: fix bug with re-adding of partially recovered device Greg KH
2011-01-05 23:00 ` [24/49] tracing: Fix panic when lseek() called on "trace" opened for writing Greg KH
2011-01-05 23:00 ` [25/49] x86, gcc-4.6: Use gcc -m options when building vdso Greg KH
2011-01-05 23:00 ` Greg KH [this message]
2011-01-05 23:00 ` [27/49] x86, vt-d: Handle previous faults after enabling fault handling Greg KH
2011-01-05 23:00 ` [28/49] x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode Greg KH
2011-01-05 23:00 ` [29/49] x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic Greg KH
2011-01-05 23:00 ` [30/49] hvc_console: Fix race between hvc_close and hvc_remove Greg KH
2011-01-05 23:00 ` [31/49] hvc_console: Fix race between hvc_close and hvc_remove, again Greg KH
2011-01-05 23:00 ` [32/49] HID: hidraw: fix window in hidraw_release Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110105230326.068443369@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=chrisw@sous-sol.org \
--cc=hpa@linux.intel.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=suresh.b.siddha@intel.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox