From: Robert Richter <robert.richter@amd.com>
To: Jan Beulich <JBeulich@novell.com>
Cc: "mingo@elte.hu" <mingo@elte.hu>,
"tglx@linutronix.de" <tglx@linutronix.de>,
"hpa@zytor.com" <hpa@zytor.com>,
"Herrmann3, Andreas" <Andreas.Herrmann3@amd.com>,
"Roedel, Joerg" <Joerg.Roedel@amd.com>,
Jeremy Fitzhardinge <jeremy@goop.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] x86: use PCI method for enabling AMD extended config space before MSR method
Date: Thu, 6 Jan 2011 18:20:04 +0100 [thread overview]
Message-ID: <20110106172004.GM4739@erda.amd.com> (raw)
In-Reply-To: <4D26028F020000780002AC8A@vpn.id2.novell.com>
On 06.01.11 11:57:35, Jan Beulich wrote:
> While both methods should work equivalently well for the native case,
> the Xen Dom0 case can't reliably work with the MSR one, since there's
> no guarantee that the virtual CPUs it has available fully cover all
> necessary physical ones.
>
> As per the suggestion of Robert Richter the patch only adds the PCI
> method, but leaves the MSR one as a fallback to cover new systems the
> PCI IDs of which may not have got added to the code base yet.
>
> Signed-off-by: Jan Beulich <jbeulich@novell.com>
> Cc: Robert Richter <robert.richter@amd.com>
> Cc: Joerg Roedel <Joerg.Roedel@amd.com>
> Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com>
> Cc: Jeremy Fitzhardinge <jeremy@goop.org>
>
> ---
> arch/x86/include/asm/amd_nb.h | 7 ++++++
> arch/x86/kernel/amd_nb.c | 7 ++++++
> arch/x86/kernel/aperture_64.c | 44 +++++++++++++++---------------------------
> arch/x86/pci/amd_bus.c | 30 ++++++++++++++++++++++++++++
> 4 files changed, 60 insertions(+), 28 deletions(-)
> --- 2.6.37/arch/x86/pci/amd_bus.c
> +++ 2.6.37-x86-amd-ecs/arch/x86/pci/amd_bus.c
> @@ -4,6 +4,7 @@
> #include <linux/cpu.h>
> #include <linux/range.h>
>
> +#include <asm/amd_nb.h>
> #include <asm/pci_x86.h>
>
> #include <asm/pci-direct.h>
> @@ -386,6 +387,35 @@ static int __init pci_io_ecs_init(void)
> if (boot_cpu_data.x86 < 0x10)
> return 0;
>
> +#ifdef CONFIG_AMD_NB
> + /* Try the PCI method first. */
> + if (early_pci_allowed()) {
> + unsigned int i, n;
> +
> + for (n = i = 0; !n && amd_bus_dev_ranges[i].dev_limit; ++i) {
> + u8 bus = amd_bus_dev_ranges[i].bus;
> + u8 slot = amd_bus_dev_ranges[i].dev_base;
> + u8 limit = amd_bus_dev_ranges[i].dev_limit;
> +
> + for (; slot < limit; ++slot) {
> + u32 val = read_pci_config(bus, slot, 3, 0);
> +
> + if (!early_is_k8_nb(val))
> + continue;
> +
> + val = read_pci_config(bus, slot, 3, 0x8c);
> + if (!(val & (ENABLE_CF8_EXT_CFG >> 32))) {
> + val |= ENABLE_CF8_EXT_CFG >> 32;
> + write_pci_config(bus, slot, 3, 0x8c,
> + val);
> + }
> + ++n;
> + }
> + }
> + pr_info("Extended Config Space enabled on %u nodes\n", n);
Isn't i the number of nodes?
Otherwise the patch looks good.
-Robert
Acked-by: Robert Richter <robert.richter@amd.com>
> + }
> +#endif
> +
> register_cpu_notifier(&amd_cpu_notifier);
> for_each_online_cpu(cpu)
> amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
>
>
>
--
Advanced Micro Devices, Inc.
Operating System Research Center
next prev parent reply other threads:[~2011-01-06 17:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 16:57 [PATCH] x86: use PCI method for enabling AMD extended config space before MSR method Jan Beulich
2011-01-06 17:20 ` Robert Richter [this message]
2011-01-06 17:28 ` Robert Richter
2011-01-07 12:58 ` Ingo Molnar
2011-01-07 13:33 ` Jan Beulich
2011-01-07 7:40 ` Jan Beulich
2011-01-07 9:59 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110106172004.GM4739@erda.amd.com \
--to=robert.richter@amd.com \
--cc=Andreas.Herrmann3@amd.com \
--cc=JBeulich@novell.com \
--cc=Joerg.Roedel@amd.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox