Re: [PATCH 2.6.36] vlan: Avoid hwaccel vlan packets when vid not used

["Matt Carlson" <mcarlson@broadcom.com>]

On Thu, Jan 13, 2011 at 07:06:22AM -0800, Jesse Gross wrote:
> On Wed, Jan 12, 2011 at 8:21 PM, Matt Carlson <mcarlson@broadcom.com> wrote:
> > On Thu, Jan 06, 2011 at 08:36:27PM -0800, Jesse Gross wrote:
> >> On Thu, Jan 6, 2011 at 10:24 PM, Matt Carlson <mcarlson@broadcom.com> wrote:
> >> > On Sat, Dec 18, 2010 at 07:38:00PM -0800, Jesse Gross wrote:
> >> >> On Tue, Dec 14, 2010 at 11:16 PM, Michael Leun
> >> >> <lkml20101129@newton.leun.net> wrote:
> >> >> > OK - all tests done on that DL320G5:
> >> >> >
> >> >> > For completeness, 2.6.37-rc5 unpatched:
> >> >> >
> >> >> > eth0, no vlan configured: totally broken - see double tagged vlans
> >> >> > without tag, single or untagged packets missing at all
> >> >>
> >> >> Random behavior? ?This one is somewhat hard to explain - maybe there
> >> >> are some other factors. ?eth0 has ASF on, so it always strips tags. ?I
> >> >> would expect it to behave like the vlan configured case.
> >> >>
> >> >> >
> >> >> > eth0, vlan configured: see packets without vlan tag (see double tagged
> >> >> > packets with one vlan tag)
> >> >>
> >> >> Both ASF and vlan group configured cause tag stripping to be enabled.
> >> >> Missing tag.
> >> >>
> >> >> >
> >> >> > eth1 same as originally reported:
> >> >> > without vlan configured see vlan tags (single and double tagged as
> >> >> > expected)
> >> >>
> >> >> No ASF and no vlan group means tag stripping is disabled. ?Have tag.
> >> >>
> >> >> > with vlan configured: see packets without vlan tag (see double tagged
> >> >> > packets with one vlan tag)
> >> >>
> >> >> Configuring vlan group causes stripping to be enabled. ?Missing tag.
> >> >>
> >> >> >
> >> >> >
> >> >> > 2.6.37-rc5, your tg3 use new vlan-code patch:
> >> >> >
> >> >> > eth0, no vlan configured: ?see packets without vlan tag (see double
> >> >> > tagged packets with one vlan tag)
> >> >>
> >> >> ASF enables tag stripping. ?Missing tag.
> >> >>
> >> >> > eth1, no vlan configured: see vlan tags (single and double tagged as
> >> >> > expected)
> >> >>
> >> >> No ASF, no vlan group means no stripping. ?Have tag.
> >> >>
> >> >> >
> >> >> >
> >> >> > eth0, vlan configured: as without vlan
> >> >>
> >> >> ASF enables stripping. ?Missing tag.
> >> >>
> >> >> > eth1, vlan configured: as without vlan
> >> >>
> >> >> With this patch vlan stripping is only enabled when ASF is on, so no
> >> >> stripping. ?Have tag.
> >> >>
> >> >> >
> >> >> > 2.6.37-rc5, your tg3 use new vlan-code patch with test patch ontop
> >> >> >
> >> >> > eth1 no vlan configured: see packets without vlan tag (see double tagged
> >> >> > packets with one vlan tag)
> >> >>
> >> >> With the second patch, vlan stripping is always enabled. ?Missing tag.
> >> >>
> >> >> > eth1 with vlan: the same
> >> >>
> >> >> Stripping still always enabled. ?Missing tag.
> >> >>
> >> >> The bottom line is whenever vlan stripping is enabled we're missing
> >> >> the outer tag. ?It might be worth adding some debugging in the area
> >> >> before napi_gro_receive/vlan_gro_receive (depending on version). ?My
> >> >> guess is that (desc->type_flags & RXD_FLAG_VLAN) is false even for
> >> >> vlan packets on this NIC.
> >> >>
> >> >> You said that everything works on the 5752? ?Matt, is it possible that
> >> >> the 5714 either has a problem with vlan stripping or a different way
> >> >> of reporting it?
> >> >
> >> > I don't think this is a 5714 specific issue. ?I think the problem is
> >> > rooted in the fact that the VLAN tag stripping is enabled.
> >>
> >> It's definitely related to vlan stripping being enabled. ?Other cards
> >> using tg3 seem to work fine with stripping though, which is why I
> >> thought it might be specific to the 5714.
> >
> > I just tested this on a 5714S, using a net-next-2.6 snapshot obtained
> > today. ?It does the right thing in both cases (2nd tg3 patch ommited /
> > applied). ?The tag is always visible in the packet stream as seen from
> > tcpdump.
> >
> >> > Your RXD_FLAG_VLAN idea sounds unlikely to me, but it's worth a check.
> >> >
> >> > The patch here is using __vlan_hwaccel_put_tag(), which informs the
> >> > stack a VLAN tag is present. ?If this is indeed a reporting problem, I'm
> >> > not sure what else the driver should be doing.
> >>
> >> The code to hand off the tag to the stack looks OK to me. ?Michael was
> >> seeing this on older versions of the kernel as well with this NIC,
> >> which predates both this patch and the larger vlan changes so it
> >> doesn't seem like a problem with passing the tag to the network stack.
> >> ?It's hard to know exactly what is going on though without seeing what
> >> the hardware is reporting.
> >
> > When RX_MODE_KEEP_VLAN_TAG is set, the RXD_FLAG_VLAN flag will not be set
> > when receiving a packet. ?The driver skips the __vlan_hwaccel_put_tag()
> > call.
> >
> > When RX_MODE_KEEP_VLAN_TAG is unset, the RXD_FLAG_VLAN flag is set, and
> > __vlan_hwaccel_put_tag() is called to reinject the packet.
> 
> OK, thanks for testing it out.  I'm not sure that there's anything
> more we can do without hearing from Michael.

In the meantime, I think what we have should go upstream.  Just to be
absolutely clear though, your position is that VLAN tags should always
be stripped?