A MMC card transfer issue

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* A MMC card transfer issue
@ 2010-11-09  5:39 Tomoya MORINAGA
  2010-11-09  5:53 ` Kyungmin Park
  0 siblings, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2010-11-09  5:39 UTC (permalink / raw)
  To: linux-mmc, linux-kernel; +Cc: Andrew", kok.howg.ewe

I am facing the issue about some MMC cards on Intel EG20T PCH (Platform Controller Hub).
The linux version is 2.6.36.
I can not transfer data the MMC cards (e.g. Transcned MMC card).
The card is 1 bit bus width. And the card is according to MMC specification V3.x.
And the EG20T has a 4 bit bus width capability 
Linux MMC standard driver decides the card bus width as 4 bit,
if the MMC specification version is larger than or equal to V4.0 like below.

linux/drivers/mmc/core/mmc.c

 505        /*
 506         * Activate wide bus (if supported).
 507         */
 508        if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
 509            (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
 510                unsigned ext_csd_bit, bus_width;
 511
 512                if (host->caps & MMC_CAP_8_BIT_DATA) {
 513                        ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
 514                        bus_width = MMC_BUS_WIDTH_8;
 515                } else {
 516                        ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
 517                        bus_width = MMC_BUS_WIDTH_4;
 518                }
 519
 520                err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 521                                 EXT_CSD_BUS_WIDTH, ext_csd_bit);
 522
 523                if (err && err != -EBADMSG)
 524                        goto free_card;
 525
 526                if (err) {
 527                        printk(KERN_WARNING "%s: switch to bus width %d "
 528                               "failed\n", mmc_hostname(card->host),
 529                               1 << bus_width);
 530                        err = 0;
 531                } else {
 532                        mmc_set_bus_width(card->host, bus_width);
 533                }
 534        }
 535

However the MMC specification version id is the same as V3.x and V4.0.
Therefore the driver uses the 4 bit bus width for the MMC card 
even if the card has only 1 bit bus width.
I modified the driver to use 1 bit bus width only tentatively and confirmed that
we can mount the card and R/W correctly.

I think we can not support MMC_CAP_4_BIT_DATA or MMC_CAP_8_BIT_DATA in MMC V4.0.

How do you think ?

-- 
Thanks,
Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.)

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2010-11-09  5:39 A MMC card transfer issue Tomoya MORINAGA
@ 2010-11-09  5:53 ` Kyungmin Park
  2010-11-09  7:29   ` Tomoya MORINAGA
  2010-11-11  2:59   ` Tomoya MORINAGA
  0 siblings, 2 replies; 20+ messages in thread
From: Kyungmin Park @ 2010-11-09  5:53 UTC (permalink / raw)
  To: Tomoya MORINAGA; +Cc: linux-mmc, linux-kernel, Andrew", kok.howg.ewe

2010/11/9 Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>:
> I am facing the issue about some MMC cards on Intel EG20T PCH (Platform Controller Hub).
> The linux version is 2.6.36.
> I can not transfer data the MMC cards (e.g. Transcned MMC card).
> The card is 1 bit bus width. And the card is according to MMC specification V3.x.
> And the EG20T has a 4 bit bus width capability
> Linux MMC standard driver decides the card bus width as 4 bit,
> if the MMC specification version is larger than or equal to V4.0 like below.
>
> linux/drivers/mmc/core/mmc.c
>
>  505        /*
>  506         * Activate wide bus (if supported).
>  507         */
>  508        if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
>  509            (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
>  510                unsigned ext_csd_bit, bus_width;
>  511
>  512                if (host->caps & MMC_CAP_8_BIT_DATA) {
>  513                        ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
>  514                        bus_width = MMC_BUS_WIDTH_8;
>  515                } else {
>  516                        ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
>  517                        bus_width = MMC_BUS_WIDTH_4;
>  518                }
>  519
>  520                err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>  521                                 EXT_CSD_BUS_WIDTH, ext_csd_bit);
>  522
>  523                if (err && err != -EBADMSG)
>  524                        goto free_card;
>  525
>  526                if (err) {
>  527                        printk(KERN_WARNING "%s: switch to bus width %d "
>  528                               "failed\n", mmc_hostname(card->host),
>  529                               1 << bus_width);
>  530                        err = 0;
>  531                } else {
>  532                        mmc_set_bus_width(card->host, bus_width);
>  533                }
>  534        }
>  535
>
> However the MMC specification version id is the same as V3.x and V4.0.
> Therefore the driver uses the 4 bit bus width for the MMC card
> even if the card has only 1 bit bus width.
> I modified the driver to use 1 bit bus width only tentatively and confirmed that
> we can mount the card and R/W correctly.
>
> I think we can not support MMC_CAP_4_BIT_DATA or MMC_CAP_8_BIT_DATA in MMC V4.0.
>
> How do you think ?

You can find a patch for 4-bit support. the problem is there's some
bug related so it set the 4 & 8 bit support both.
So line 512 is always true. you can just remove the one line like this.

It's quirk-and-dirty patch. now we try to find a generic solution to
solve this issue.
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1849,7 +1849,7 @@ int sdhci_add_host(struct sdhci_host *host)
        mmc->caps |= MMC_CAP_SDIO_IRQ;

        if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-               mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+               mmc->caps |= MMC_CAP_4_BIT_DATA;

        if (caps & SDHCI_CAN_DO_HISPD)
                mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;

Thank you,
Kyungmin Park
>
> --
> Thanks,
> Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2010-11-09  5:53 ` Kyungmin Park
@ 2010-11-09  7:29   ` Tomoya MORINAGA
  2010-11-11  2:59   ` Tomoya MORINAGA
  1 sibling, 0 replies; 20+ messages in thread
From: Tomoya MORINAGA @ 2010-11-09  7:29 UTC (permalink / raw)
  To: Kyungmin Park; +Cc: linux-mmc, linux-kernel, Andrew", kok.howg.ewe

Hi Park,

Thank you for your information.
I will try it soon.

Thanks,
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.
----- Original Message ----- 
From: "Kyungmin Park" <kmpark@infradead.org>
To: "Tomoya MORINAGA" <tomoya-linux@dsn.okisemi.com>
Cc: <linux-mmc@vger.kernel.org>; <linux-kernel@vger.kernel.org>; "Andrew"" <andrew.chih.howe.khor@intel.com>;
<kok.howg.ewe@intel.com>
Sent: Tuesday, November 09, 2010 2:53 PM
Subject: Re: A MMC card transfer issue


> 2010/11/9 Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>:
> > I am facing the issue about some MMC cards on Intel EG20T PCH (Platform Controller Hub).
> > The linux version is 2.6.36.
> > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > The card is 1 bit bus width. And the card is according to MMC specification V3.x.
> > And the EG20T has a 4 bit bus width capability
> > Linux MMC standard driver decides the card bus width as 4 bit,
> > if the MMC specification version is larger than or equal to V4.0 like below.
> >
> > linux/drivers/mmc/core/mmc.c
> >
> > 505 /*
> > 506 * Activate wide bus (if supported).
> > 507 */
> > 508 if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> > 509 (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
> > 510 unsigned ext_csd_bit, bus_width;
> > 511
> > 512 if (host->caps & MMC_CAP_8_BIT_DATA) {
> > 513 ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
> > 514 bus_width = MMC_BUS_WIDTH_8;
> > 515 } else {
> > 516 ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
> > 517 bus_width = MMC_BUS_WIDTH_4;
> > 518 }
> > 519
> > 520 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> > 521 EXT_CSD_BUS_WIDTH, ext_csd_bit);
> > 522
> > 523 if (err && err != -EBADMSG)
> > 524 goto free_card;
> > 525
> > 526 if (err) {
> > 527 printk(KERN_WARNING "%s: switch to bus width %d "
> > 528 "failed\n", mmc_hostname(card->host),
> > 529 1 << bus_width);
> > 530 err = 0;
> > 531 } else {
> > 532 mmc_set_bus_width(card->host, bus_width);
> > 533 }
> > 534 }
> > 535
> >
> > However the MMC specification version id is the same as V3.x and V4.0.
> > Therefore the driver uses the 4 bit bus width for the MMC card
> > even if the card has only 1 bit bus width.
> > I modified the driver to use 1 bit bus width only tentatively and confirmed that
> > we can mount the card and R/W correctly.
> >
> > I think we can not support MMC_CAP_4_BIT_DATA or MMC_CAP_8_BIT_DATA in MMC V4.0.
> >
> > How do you think ?
>
> You can find a patch for 4-bit support. the problem is there's some
> bug related so it set the 4 & 8 bit support both.
> So line 512 is always true. you can just remove the one line like this.
>
> It's quirk-and-dirty patch. now we try to find a generic solution to
> solve this issue.
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1849,7 +1849,7 @@ int sdhci_add_host(struct sdhci_host *host)
>         mmc->caps |= MMC_CAP_SDIO_IRQ;
>
>         if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
> -               mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
> +               mmc->caps |= MMC_CAP_4_BIT_DATA;
>
>         if (caps & SDHCI_CAN_DO_HISPD)
>                 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
>
> Thank you,
> Kyungmin Park
> >
> > --
> > Thanks,
> > Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.)
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2010-11-09  5:53 ` Kyungmin Park
  2010-11-09  7:29   ` Tomoya MORINAGA
@ 2010-11-11  2:59   ` Tomoya MORINAGA
  2010-12-01  1:08     ` Tomoya MORINAGA
  1 sibling, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2010-11-11  2:59 UTC (permalink / raw)
  To: Kyungmin Park; +Cc: kok.howg.ewe, Andrew", linux-kernel, linux-mmc

Hi Park,

Though I  tried to patch yours to "sdhci.c" of linux-2.6.36,
but it seems your patch has already patched in linux-2.6.36.

Using this linux, MMC card is not recognized.
Inserting the MMC card, I saw the following erro message.

[   11.035441] sdhci: Secure Digital Host Controller Interface driver
[   11.035450] sdhci: Copyright(c) Pierre Ossman
[   11.058295] sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 1)
[   11.058342]   alloc irq_desc for 18 on node -1
[   11.058350]   alloc kstat_irqs on node -1
[   11.058373] sdhci-pci 0000:02:04.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.058385] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems.
[   11.058487] sdhci-pci 0000:02:04.0: setting latency timer to 64
[   11.058623] Registered led device: mmc0::
[   11.058736] mmc0: SDHCI controller on PCI [0000:02:04.0] using DMA
[   11.058774] sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 1)
[   11.058816] sdhci-pci 0000:02:04.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.058828] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems.
[   11.058904] sdhci-pci 0000:02:04.1: setting latency timer to 64
[   11.059047] Registered led device: mmc1::
[   11.059153] mmc1: SDHCI controller on PCI [0000:02:04.1] using DMA
[   11.547645] mmc1: new high speed SD card at address 0ec7
[   11.629400] mmcblk0: mmc1:0ec7 SV02G 1.87 GiB (ro)
[   11.630314]  mmcblk0: p1
[   12.076459] gzip used greatest stack depth: 6008 bytes left
[   12.321795] ip used greatest stack depth: 5724 bytes left
[   13.786510] EXT3-fs (dm-0): using internal journal
[   13.887463] EXT3-fs: barriers not enabled
[   13.887872] kjournald starting.  Commit interval 5 seconds
[   13.888154] EXT3-fs (sda1): using internal journal
[   13.888178] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   23.183874] Adding 2064380k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2064380k
[   39.171225] gconfd-2 used greatest stack depth: 5692 bytes left
[   86.545435] metacity[2318]: segfault at 0 ip 080aa093 sp bfd899a0 error 4 in metacity[8048000+82000]
[  115.124784] hda-intel: Invalid position buffer, using LPIB read method instead.
[  115.124821] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[  346.630117] mmc1: card 0ec7 removed
[  408.266730] mmc1: new MMC card at address 0001
[  408.268142] mmcblk0: mmc1:0001 MMC    1.87 GiB
[  408.275970] mmcblk0: retrying using single block read
[  408.278451] mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
[  408.278464] end_request: I/O error, dev mmcblk0, sector 0
[  408.280966] mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
[  408.280978] end_request: I/O error, dev mmcblk0, sector 1


I have suspected mmc.c is buggy.
I tried to disable like the following in "mmc_init_card".
As a result, the MMC card to be recognized correctly.
What's do you think ?

 */
static int mmc_init_card(struct mmc_host *host, u32 ocr,
 struct mmc_card *oldcard)
{
......

 /*
  * Activate wide bus (if supported).
  */
#if 0 //101111
 if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
     (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
  unsigned ext_csd_bit, bus_width;

  if (host->caps & MMC_CAP_8_BIT_DATA) {
   ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
   bus_width = MMC_BUS_WIDTH_8;
  } else {
   ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
   bus_width = MMC_BUS_WIDTH_4;
  }

  err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
     EXT_CSD_BUS_WIDTH, ext_csd_bit);

  if (err && err != -EBADMSG)
   goto free_card;

  if (err) {
   printk(KERN_WARNING "%s: switch to bus width %d "
          "failed\n", mmc_hostname(card->host),
          1 << bus_width);
   err = 0;
  } else {
   mmc_set_bus_width(card->host, bus_width);
  }
 }
#endif //101111




------
Thanks,

Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.


----- Original Message ----- 
From: "Kyungmin Park" <kmpark@infradead.org>
To: "Tomoya MORINAGA" <tomoya-linux@dsn.okisemi.com>
Cc: <linux-mmc@vger.kernel.org>; <linux-kernel@vger.kernel.org>; "Andrew"" <andrew.chih.howe.khor@intel.com>;
<kok.howg.ewe@intel.com>
Sent: Tuesday, November 09, 2010 2:53 PM
Subject: Re: A MMC card transfer issue


> 2010/11/9 Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>:
> > I am facing the issue about some MMC cards on Intel EG20T PCH (Platform Controller Hub).
> > The linux version is 2.6.36.
> > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > The card is 1 bit bus width. And the card is according to MMC specification V3.x.
> > And the EG20T has a 4 bit bus width capability
> > Linux MMC standard driver decides the card bus width as 4 bit,
> > if the MMC specification version is larger than or equal to V4.0 like below.
> >
> > linux/drivers/mmc/core/mmc.c
> >
> > 505 /*
> > 506 * Activate wide bus (if supported).
> > 507 */
> > 508 if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> > 509 (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
> > 510 unsigned ext_csd_bit, bus_width;
> > 511
> > 512 if (host->caps & MMC_CAP_8_BIT_DATA) {
> > 513 ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
> > 514 bus_width = MMC_BUS_WIDTH_8;
> > 515 } else {
> > 516 ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
> > 517 bus_width = MMC_BUS_WIDTH_4;
> > 518 }
> > 519
> > 520 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> > 521 EXT_CSD_BUS_WIDTH, ext_csd_bit);
> > 522
> > 523 if (err && err != -EBADMSG)
> > 524 goto free_card;
> > 525
> > 526 if (err) {
> > 527 printk(KERN_WARNING "%s: switch to bus width %d "
> > 528 "failed\n", mmc_hostname(card->host),
> > 529 1 << bus_width);
> > 530 err = 0;
> > 531 } else {
> > 532 mmc_set_bus_width(card->host, bus_width);
> > 533 }
> > 534 }
> > 535
> >
> > However the MMC specification version id is the same as V3.x and V4.0.
> > Therefore the driver uses the 4 bit bus width for the MMC card
> > even if the card has only 1 bit bus width.
> > I modified the driver to use 1 bit bus width only tentatively and confirmed that
> > we can mount the card and R/W correctly.
> >
> > I think we can not support MMC_CAP_4_BIT_DATA or MMC_CAP_8_BIT_DATA in MMC V4.0.
> >
> > How do you think ?
>
> You can find a patch for 4-bit support. the problem is there's some
> bug related so it set the 4 & 8 bit support both.
> So line 512 is always true. you can just remove the one line like this.
>
> It's quirk-and-dirty patch. now we try to find a generic solution to
> solve this issue.
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1849,7 +1849,7 @@ int sdhci_add_host(struct sdhci_host *host)
>         mmc->caps |= MMC_CAP_SDIO_IRQ;
>
>         if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
> -               mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
> +               mmc->caps |= MMC_CAP_4_BIT_DATA;
>
>         if (caps & SDHCI_CAN_DO_HISPD)
>                 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
>
> Thank you,
> Kyungmin Park
> >
> > --
> > Thanks,
> > Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.)
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2010-11-11  2:59   ` Tomoya MORINAGA
@ 2010-12-01  1:08     ` Tomoya MORINAGA
       [not found]       ` <2D50F985-2383-4406-8514-DFE462A5F546@marvell.com>
  0 siblings, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2010-12-01  1:08 UTC (permalink / raw)
  To: Kyungmin Park; +Cc: linux-mmc, linux-kernel, Andrew", kok.howg.ewe

Hi Park,

How's the issue going ?

With best regards.
---
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.
----- Original Message ----- 
From: "Tomoya MORINAGA" <tomoya-linux@dsn.okisemi.com>
To: "Kyungmin Park" <kmpark@infradead.org>
Cc: <kok.howg.ewe@intel.com>; "Andrew"" <andrew.chih.howe.khor@intel.com>; <linux-kernel@vger.kernel.org>;
<linux-mmc@vger.kernel.org>
Sent: Thursday, November 11, 2010 11:59 AM
Subject: Re: A MMC card transfer issue


> Hi Park,
>
> Though I  tried to patch yours to "sdhci.c" of linux-2.6.36,
> but it seems your patch has already patched in linux-2.6.36.
>
> Using this linux, MMC card is not recognized.
> Inserting the MMC card, I saw the following erro message.
>
> [   11.035441] sdhci: Secure Digital Host Controller Interface driver
> [   11.035450] sdhci: Copyright(c) Pierre Ossman
> [   11.058295] sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 1)
> [   11.058342]   alloc irq_desc for 18 on node -1
> [   11.058350]   alloc kstat_irqs on node -1
> [   11.058373] sdhci-pci 0000:02:04.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [   11.058385] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems.
> [   11.058487] sdhci-pci 0000:02:04.0: setting latency timer to 64
> [   11.058623] Registered led device: mmc0::
> [   11.058736] mmc0: SDHCI controller on PCI [0000:02:04.0] using DMA
> [   11.058774] sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 1)
> [   11.058816] sdhci-pci 0000:02:04.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [   11.058828] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems.
> [   11.058904] sdhci-pci 0000:02:04.1: setting latency timer to 64
> [   11.059047] Registered led device: mmc1::
> [   11.059153] mmc1: SDHCI controller on PCI [0000:02:04.1] using DMA
> [   11.547645] mmc1: new high speed SD card at address 0ec7
> [   11.629400] mmcblk0: mmc1:0ec7 SV02G 1.87 GiB (ro)
> [   11.630314]  mmcblk0: p1
> [   12.076459] gzip used greatest stack depth: 6008 bytes left
> [   12.321795] ip used greatest stack depth: 5724 bytes left
> [   13.786510] EXT3-fs (dm-0): using internal journal
> [   13.887463] EXT3-fs: barriers not enabled
> [   13.887872] kjournald starting.  Commit interval 5 seconds
> [   13.888154] EXT3-fs (sda1): using internal journal
> [   13.888178] EXT3-fs (sda1): mounted filesystem with writeback data mode
> [   23.183874] Adding 2064380k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2064380k
> [   39.171225] gconfd-2 used greatest stack depth: 5692 bytes left
> [   86.545435] metacity[2318]: segfault at 0 ip 080aa093 sp bfd899a0 error 4 in metacity[8048000+82000]
> [  115.124784] hda-intel: Invalid position buffer, using LPIB read method instead.
> [  115.124821] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
> [  346.630117] mmc1: card 0ec7 removed
> [  408.266730] mmc1: new MMC card at address 0001
> [  408.268142] mmcblk0: mmc1:0001 MMC    1.87 GiB
> [  408.275970] mmcblk0: retrying using single block read
> [  408.278451] mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
> [  408.278464] end_request: I/O error, dev mmcblk0, sector 0
> [  408.280966] mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
> [  408.280978] end_request: I/O error, dev mmcblk0, sector 1
>
>
> I have suspected mmc.c is buggy.
> I tried to disable like the following in "mmc_init_card".
> As a result, the MMC card to be recognized correctly.
> What's do you think ?
>
>  */
> static int mmc_init_card(struct mmc_host *host, u32 ocr,
>  struct mmc_card *oldcard)
> {
> ......
>
>  /*
>   * Activate wide bus (if supported).
>   */
> #if 0 //101111
>  if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
>      (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
>   unsigned ext_csd_bit, bus_width;
>
>   if (host->caps & MMC_CAP_8_BIT_DATA) {
>    ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
>    bus_width = MMC_BUS_WIDTH_8;
>   } else {
>    ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
>    bus_width = MMC_BUS_WIDTH_4;
>   }
>
>   err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>      EXT_CSD_BUS_WIDTH, ext_csd_bit);
>
>   if (err && err != -EBADMSG)
>    goto free_card;
>
>   if (err) {
>    printk(KERN_WARNING "%s: switch to bus width %d "
>           "failed\n", mmc_hostname(card->host),
>           1 << bus_width);
>    err = 0;
>   } else {
>    mmc_set_bus_width(card->host, bus_width);
>   }
>  }
> #endif //101111
>
>
>
>
> ------
> Thanks,
>
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.
>
>
> ----- Original Message ----- 
> From: "Kyungmin Park" <kmpark@infradead.org>
> To: "Tomoya MORINAGA" <tomoya-linux@dsn.okisemi.com>
> Cc: <linux-mmc@vger.kernel.org>; <linux-kernel@vger.kernel.org>; "Andrew"" <andrew.chih.howe.khor@intel.com>;
> <kok.howg.ewe@intel.com>
> Sent: Tuesday, November 09, 2010 2:53 PM
> Subject: Re: A MMC card transfer issue
>
>
> > 2010/11/9 Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>:
> > > I am facing the issue about some MMC cards on Intel EG20T PCH (Platform Controller Hub).
> > > The linux version is 2.6.36.
> > > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > > The card is 1 bit bus width. And the card is according to MMC specification V3.x.
> > > And the EG20T has a 4 bit bus width capability
> > > Linux MMC standard driver decides the card bus width as 4 bit,
> > > if the MMC specification version is larger than or equal to V4.0 like below.
> > >
> > > linux/drivers/mmc/core/mmc.c
> > >
> > > 505 /*
> > > 506 * Activate wide bus (if supported).
> > > 507 */
> > > 508 if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> > > 509 (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
> > > 510 unsigned ext_csd_bit, bus_width;
> > > 511
> > > 512 if (host->caps & MMC_CAP_8_BIT_DATA) {
> > > 513 ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
> > > 514 bus_width = MMC_BUS_WIDTH_8;
> > > 515 } else {
> > > 516 ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
> > > 517 bus_width = MMC_BUS_WIDTH_4;
> > > 518 }
> > > 519
> > > 520 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> > > 521 EXT_CSD_BUS_WIDTH, ext_csd_bit);
> > > 522
> > > 523 if (err && err != -EBADMSG)
> > > 524 goto free_card;
> > > 525
> > > 526 if (err) {
> > > 527 printk(KERN_WARNING "%s: switch to bus width %d "
> > > 528 "failed\n", mmc_hostname(card->host),
> > > 529 1 << bus_width);
> > > 530 err = 0;
> > > 531 } else {
> > > 532 mmc_set_bus_width(card->host, bus_width);
> > > 533 }
> > > 534 }
> > > 535
> > >
> > > However the MMC specification version id is the same as V3.x and V4.0.
> > > Therefore the driver uses the 4 bit bus width for the MMC card
> > > even if the card has only 1 bit bus width.
> > > I modified the driver to use 1 bit bus width only tentatively and confirmed that
> > > we can mount the card and R/W correctly.
> > >
> > > I think we can not support MMC_CAP_4_BIT_DATA or MMC_CAP_8_BIT_DATA in MMC V4.0.
> > >
> > > How do you think ?
> >
> > You can find a patch for 4-bit support. the problem is there's some
> > bug related so it set the 4 & 8 bit support both.
> > So line 512 is always true. you can just remove the one line like this.
> >
> > It's quirk-and-dirty patch. now we try to find a generic solution to
> > solve this issue.
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -1849,7 +1849,7 @@ int sdhci_add_host(struct sdhci_host *host)
> >         mmc->caps |= MMC_CAP_SDIO_IRQ;
> >
> >         if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
> > -               mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
> > +               mmc->caps |= MMC_CAP_4_BIT_DATA;
> >
> >         if (caps & SDHCI_CAN_DO_HISPD)
> >                 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
> >
> > Thank you,
> > Kyungmin Park
> > >
> > > --
> > > Thanks,
> > > Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.)
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>


^ permalink raw reply	[flat|nested] 20+ messages in thread

[parent not found: <2D50F985-2383-4406-8514-DFE462A5F546@marvell.com>]

[parent not found: <4D2E0464ABB54FFF9C10583336E27879@hacdom.okisemi.com>]

* Re: A MMC card transfer issue
       [not found]         ` <4D2E0464ABB54FFF9C10583336E27879@hacdom.okisemi.com>
@ 2011-01-19  0:59           ` Philip Rakity
  2011-01-19  1:29             ` Tomoya MORINAGA
  2011-01-19  6:05           ` Philip Rakity
  1 sibling, 1 reply; 20+ messages in thread
From: Philip Rakity @ 2011-01-19  0:59 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com


I just looked in the 2.6.37 code and the fix is not there.  It is in the 2.6.37 linus  tree.  

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/mmc/core/mmc.c;h=16006ef153fe081c2f0f0a09cd4443ce7f3c49a1;hb=a25cecce88194b2edf38b8c3b1665e9318eb2d22

Chris Ball who maintains this should know when it will be pushed upwards.

Philip 
On Jan 18, 2011, at 4:36 PM, Tomoya MORINAGA wrote:

> Hi Philip,
>  
> On Wednesday, December 01, 2010 10:31 AM, Philip Rakity wrote:
> > Thanks very much, I'll plan on sending this to Linus tomorrow, along
> > with the rest of my .37 queue, unless there are any more review
> > comments from anyone.
>  
> We tried to use the MMC card like the following on kernel-2.6.37.
>  
> On Tuesday, November 09, 2010 2:40 PM, Tomoya MORINAGA wrote:
> > I am facing the issue about some MMC cards on Intel EG20T PCH 
> > (Platform Controller Hub).
> > The linux version is 2.6.36.
> > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > The card is 1 bit bus width. And the card is according to MMC 
> > specification V3.x.
> > And the EG20T has a 4 bit bus width capability Linux MMC 
> > standard driver decides the card bus width as 4 bit, if the 
> > MMC specification version is larger than or equal to V4.0 like below.
>  
> However it seems the issue remains to be seen.
> Have you fixed the MMC unrecognized issue in kernel-2.6.37?
>  
> Thanks,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.


^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-19  0:59           ` Philip Rakity
@ 2011-01-19  1:29             ` Tomoya MORINAGA
  2011-01-19  1:41               ` Chris Ball
  0 siblings, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-19  1:29 UTC (permalink / raw)
  To: 'Philip Rakity', cjb
  Cc: 'Kyungmin Park', linux-mmc, linux-kernel,
	andrew.chih.howe.khor, kok.howg.ewe, Toshiharu Okada

Hi Chris,

On Wednesday, January 19, 2011 10:00 AM, Philip Rakity wrote:
> I just looked in the 2.6.37 code and the fix is not there.  
> It is in the 2.6.37 linus  tree.  
> 
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.g
> it;a=blob;f=drivers/mmc/core/mmc.c;h=16006ef153fe081c2f0f0a09c
> d4443ce7f3c49a1;hb=a25cecce88194b2edf38b8c3b1665e9318eb2d22
> 
> Chris Ball who maintains this should know when it will be 
> pushed upwards.

Do you know when the above patch will be integrated to kernel ?

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-19  1:29             ` Tomoya MORINAGA
@ 2011-01-19  1:41               ` Chris Ball
  2011-01-19  3:12                 ` Philip Rakity
  0 siblings, 1 reply; 20+ messages in thread
From: Chris Ball @ 2011-01-19  1:41 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: 'Philip Rakity', 'Kyungmin Park', linux-mmc,
	linux-kernel, andrew.chih.howe.khor, kok.howg.ewe,
	Toshiharu Okada

On Wed, Jan 19, 2011 at 10:29:21AM +0900, Tomoya MORINAGA wrote:
> On Wednesday, January 19, 2011 10:00 AM, Philip Rakity wrote:
> > I just looked in the 2.6.37 code and the fix is not there.  
> > It is in the 2.6.37 linus  tree.  
> > 
> > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.g
> > it;a=blob;f=drivers/mmc/core/mmc.c;h=16006ef153fe081c2f0f0a09c
> > d4443ce7f3c49a1;hb=a25cecce88194b2edf38b8c3b1665e9318eb2d22
> 
> Do you know when the above patch will be integrated to kernel ?

I don't understand, sorry.  The link is to a file, not a patch, and
Philip's statement above talks about a patch being in 2.6.37 but not
being in 2.6.37, which I don't understand either.

Looking back farther in the thread, I think you're both talking about:
http://git.kernel.org/?p=linux/kernel/git/cjb/mmc.git;a=commit;h=15ec44611904be0dcc97b84c29fbf964e5e2b36f

This patch was merged into Linus' 2.6.37-rc4 on Nov 27 2010, and
released as part of 2.6.37.

Can you elaborate on your question, if it's still outstanding?

Thanks,

-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-19  1:41               ` Chris Ball
@ 2011-01-19  3:12                 ` Philip Rakity
  0 siblings, 0 replies; 20+ messages in thread
From: Philip Rakity @ 2011-01-19  3:12 UTC (permalink / raw)
  To: Chris Ball
  Cc: Tomoya MORINAGA, Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com, Toshiharu Okada


Chris,

transcend card is 1 bit card.  Requires bus_width patches.

Philip

On Jan 18, 2011, at 5:41 PM, Chris Ball wrote:

> On Wed, Jan 19, 2011 at 10:29:21AM +0900, Tomoya MORINAGA wrote:
>> On Wednesday, January 19, 2011 10:00 AM, Philip Rakity wrote:
>>> I just looked in the 2.6.37 code and the fix is not there.  
>>> It is in the 2.6.37 linus  tree.  
>>> 
>>> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.g
>>> it;a=blob;f=drivers/mmc/core/mmc.c;h=16006ef153fe081c2f0f0a09c
>>> d4443ce7f3c49a1;hb=a25cecce88194b2edf38b8c3b1665e9318eb2d22
>> 
>> Do you know when the above patch will be integrated to kernel ?
> 
> I don't understand, sorry.  The link is to a file, not a patch, and
> Philip's statement above talks about a patch being in 2.6.37 but not
> being in 2.6.37, which I don't understand either.
> 
> Looking back farther in the thread, I think you're both talking about:
> http://git.kernel.org/?p=linux/kernel/git/cjb/mmc.git;a=commit;h=15ec44611904be0dcc97b84c29fbf964e5e2b36f
> 
> This patch was merged into Linus' 2.6.37-rc4 on Nov 27 2010, and
> released as part of 2.6.37.
> 
> Can you elaborate on your question, if it's still outstanding?
> 
> Thanks,
> 
> -- 
> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
> One Laptop Per Child


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
       [not found]         ` <4D2E0464ABB54FFF9C10583336E27879@hacdom.okisemi.com>
  2011-01-19  0:59           ` Philip Rakity
@ 2011-01-19  6:05           ` Philip Rakity
  2011-01-19  6:30             ` Tomoya MORINAGA
  2011-01-19 17:42             ` Chris Ball
  1 sibling, 2 replies; 20+ messages in thread
From: Philip Rakity @ 2011-01-19  6:05 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com


For 1 bit transcend cards you need these 2 patches.


>From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 2001
From: Aries Lee <arieslee@jmicron.com>
Date: Wed, 15 Dec 2010 08:14:24 +0100
Subject: [PATCH] mmc: Test bus-width for old MMC devices

Some old MMC devices fail with the 4/8 bits the driver tries to use
exclusively.  This patch adds a test for the given bus setup and falls
back to the lower bit mode (until 1-bit mode) when the test fails.

[Major rework and refactoring by tiwai]
[Quirk addition and many fixes by prakity]

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/mmc.c     |   76 ++++++++++++++++++++-------------
 drivers/mmc/core/mmc_ops.c |  101 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/core/mmc_ops.h |    1 +
 drivers/mmc/host/sdhci.c   |    7 +++-
 drivers/mmc/host/sdhci.h   |    1 +
 include/linux/mmc/host.h   |    1 +
 include/linux/mmc/mmc.h    |    2 +
 7 files changed, 159 insertions(+), 30 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 76bb621..1d8409f 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -534,39 +534,57 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
 	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
-		unsigned ext_csd_bit, bus_width;
-
-		if (host->caps & MMC_CAP_8_BIT_DATA) {
-			if (ddr)
-				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8;
-			else
-				ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
-			bus_width = MMC_BUS_WIDTH_8;
-		} else {
-			if (ddr)
-				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4;
-			else
-				ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
-			bus_width = MMC_BUS_WIDTH_4;
+		static unsigned ext_csd_bits[][2] = {
+			{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
+			{ EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 },
+			{ EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 },
+		};
+		static unsigned bus_widths[] = {
+			MMC_BUS_WIDTH_8,
+			MMC_BUS_WIDTH_4,
+			MMC_BUS_WIDTH_1
+		};
+		unsigned idx, bus_width = 0;
+
+		if (host->caps & MMC_CAP_8_BIT_DATA)
+			idx = 0;
+		else
+			idx = 1;
+		for (; idx < ARRAY_SIZE(bus_widths); idx++) {
+			bus_width = bus_widths[idx];
+			if (bus_width == MMC_BUS_WIDTH_1)
+				ddr = 0; /* no DDR for 1-bit width */
+			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					 EXT_CSD_BUS_WIDTH,
+					 ext_csd_bits[idx][0]);
+			if (!err) {
+				/*
+				 * If controller can't handle bus width test,
+				 * use the highest bus width to maintain
+				 * compatibility with previous MMC behavior.
+				 */
+				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
+					break;
+				mmc_set_bus_width_ddr(card->host,
+						      bus_width, MMC_SDR_MODE);
+				err = mmc_bus_test(card, bus_width);
+				if (!err)
+					break;
+			}
 		}
 
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_BUS_WIDTH, ext_csd_bit);
-
-		if (err && err != -EBADMSG)
-			goto free_card;
-
+		if (!err && ddr) {
+			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					EXT_CSD_BUS_WIDTH,
+					ext_csd_bits[idx][1]);
+		}
 		if (err) {
 			printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
-			       "failed\n", mmc_hostname(card->host),
-			       1 << bus_width, ddr);
-			err = 0;
-		} else {
-			if (ddr)
-				mmc_card_set_ddr_mode(card);
-			else
-				ddr = MMC_SDR_MODE;
-
+				"failed\n", mmc_hostname(card->host),
+				1 << bus_width, ddr);
+			goto free_card;
+		} else if (ddr) {
+			mmc_card_set_ddr_mode(card);
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 326447c..60842f8 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -462,3 +462,104 @@ int mmc_send_status(struct mmc_card *card, u32 *status)
 	return 0;
 }
 
+static int
+mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
+		  u8 len)
+{
+	struct mmc_request mrq;
+	struct mmc_command cmd;
+	struct mmc_data data;
+	struct scatterlist sg;
+	u8 *data_buf;
+	u8 *test_buf;
+	int i, err;
+	static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
+	static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
+
+	/* dma onto stack is unsafe/nonportable, but callers to this
+	 * routine normally provide temporary on-stack buffers ...
+	 */
+	data_buf = kmalloc(len, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+	if (len == 8)
+		test_buf = testdata_8bit;
+	else if (len == 4)
+		test_buf = testdata_4bit;
+	else {
+		printk(KERN_ERR "%s: Invalid bus_width %d\n",
+		       mmc_hostname(host), len);
+		kfree(data_buf);
+		return -EINVAL;
+	}
+
+	if (opcode == MMC_BUS_TEST_W)
+		memcpy(data_buf, test_buf, len);
+
+	memset(&mrq, 0, sizeof(struct mmc_request));
+	memset(&cmd, 0, sizeof(struct mmc_command));
+	memset(&data, 0, sizeof(struct mmc_data));
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+	cmd.opcode = opcode;
+	cmd.arg = 0;
+
+	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
+	 * rely on callers to never use this with "native" calls for reading
+	 * CSD or CID.  Native versions of those commands use the R2 type,
+	 * not R1 plus a data block.
+	 */
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = len;
+	data.blocks = 1;
+	if (opcode == MMC_BUS_TEST_R)
+		data.flags = MMC_DATA_READ;
+	else
+		data.flags = MMC_DATA_WRITE;
+
+	data.sg = &sg;
+	data.sg_len = 1;
+	sg_init_one(&sg, data_buf, len);
+	mmc_wait_for_req(host, &mrq);
+	err = 0;
+	if (opcode == MMC_BUS_TEST_R) {
+		for (i = 0; i < len / 4; i++)
+			if ((test_buf[i] ^ data_buf[i]) != 0xff) {
+				err = -EIO;
+				break;
+			}
+	}
+	kfree(data_buf);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return err;
+}
+
+int mmc_bus_test(struct mmc_card *card, u8 bus_width)
+{
+	int err, width;
+
+	if (bus_width == MMC_BUS_WIDTH_8)
+		width = 8;
+	else if (bus_width == MMC_BUS_WIDTH_4)
+		width = 4;
+	else if (bus_width == MMC_BUS_WIDTH_1)
+		return 0; /* no need for test */
+	else
+		return -EINVAL;
+
+	/*
+	 * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
+	 * is a problem.  This improves chances that the test will work.
+	 */
+	mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
+	err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
+	return err;
+}
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 653eb8e..e6d44b8 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -26,6 +26,7 @@ int mmc_send_cid(struct mmc_host *host, u32 *cid);
 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
 int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
 int mmc_card_sleepawake(struct mmc_host *host, int sleep);
+int mmc_bus_test(struct mmc_card *card, u8 bus_width);
 
 #endif
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5569886..d5febe5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -23,6 +23,7 @@
 
 #include <linux/leds.h>
 
+#include <linux/mmc/mmc.h>
 #include <linux/mmc/host.h>
 
 #include "sdhci.h"
@@ -1521,7 +1522,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 
 	if (intmask & SDHCI_INT_DATA_TIMEOUT)
 		host->data->error = -ETIMEDOUT;
-	else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
+	else if (intmask & SDHCI_INT_DATA_END_BIT)
+		host->data->error = -EILSEQ;
+	else if ((intmask & SDHCI_INT_DATA_CRC) &&
+		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+			!= MMC_BUS_TEST_R)
 		host->data->error = -EILSEQ;
 	else if (intmask & SDHCI_INT_ADMA_ERROR) {
 		printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1efe7dc..6e0969e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -52,6 +52,7 @@
 #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
 
 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
+#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
 
 #define SDHCI_RESPONSE		0x10
 
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 3a85e73..bcb793e 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -172,6 +172,7 @@ struct mmc_host {
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
 #define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 956fbd87..612301f 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -40,7 +40,9 @@
 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
 #define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
 #define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
+#define MMC_BUS_TEST_R           14   /* adtc                    R1  */
 #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_BUS_TEST_W           19   /* adtc                    R1  */
 #define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
 #define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
 
-- 
1.7.3.5



>From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 22 Dec 2010 09:59:44 +0100
Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap

With the bus-width test patch, mmc_set_bus_width*() isn't called properly
when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode.
This patch fixes the regression by moving the call up before the cap test.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/mmc.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1d8409f..c86dd73 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -558,6 +558,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 					 EXT_CSD_BUS_WIDTH,
 					 ext_csd_bits[idx][0]);
 			if (!err) {
+				mmc_set_bus_width_ddr(card->host,
+						      bus_width, MMC_SDR_MODE);
 				/*
 				 * If controller can't handle bus width test,
 				 * use the highest bus width to maintain
@@ -565,8 +567,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 				 */
 				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
 					break;
-				mmc_set_bus_width_ddr(card->host,
-						      bus_width, MMC_SDR_MODE);
 				err = mmc_bus_test(card, bus_width);
 				if (!err)
 					break;
-- 
1.7.3.5



On Jan 18, 2011, at 4:36 PM, Tomoya MORINAGA wrote:

> Hi Philip,
>  
> On Wednesday, December 01, 2010 10:31 AM, Philip Rakity wrote:
> > Thanks very much, I'll plan on sending this to Linus tomorrow, along
> > with the rest of my .37 queue, unless there are any more review
> > comments from anyone.
>  
> We tried to use the MMC card like the following on kernel-2.6.37.
>  
> On Tuesday, November 09, 2010 2:40 PM, Tomoya MORINAGA wrote:
> > I am facing the issue about some MMC cards on Intel EG20T PCH 
> > (Platform Controller Hub).
> > The linux version is 2.6.36.
> > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > The card is 1 bit bus width. And the card is according to MMC 
> > specification V3.x.
> > And the EG20T has a 4 bit bus width capability Linux MMC 
> > standard driver decides the card bus width as 4 bit, if the 
> > MMC specification version is larger than or equal to V4.0 like below.
>  
> However it seems the issue remains to be seen.
> Have you fixed the MMC unrecognized issue in kernel-2.6.37?
>  
> Thanks,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-19  6:05           ` Philip Rakity
@ 2011-01-19  6:30             ` Tomoya MORINAGA
  2011-01-19 17:42             ` Chris Ball
  1 sibling, 0 replies; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-19  6:30 UTC (permalink / raw)
  To: 'Philip Rakity', cjb
  Cc: 'Kyungmin Park', linux-mmc, linux-kernel,
	andrew.chih.howe.khor, kok.howg.ewe, Toshiharu Okada

[-- Attachment #1: Type: text/plain, Size: 13692 bytes --]

Hi Philip, Chris

> For 1 bit transcend cards you need these 2 patches.
Thank you for your information.
It seems these patches aren't applied for kernel-2.6.37, right ?

Will you apply these patches for kernel-2.6.38?

BTW, I attached dmesg log when inserts MMC card with kernel-2.6.37.

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.
 

> -----Original Message-----
> From: Philip Rakity [mailto:prakity@marvell.com] 
> Sent: Wednesday, January 19, 2011 3:05 PM
> To: Tomoya MORINAGA
> Cc: Kyungmin Park; linux-mmc@vger.kernel.org; 
> linux-kernel@vger.kernel.org; 
> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
> Subject: Re: A MMC card transfer issue
> 
> 
> For 1 bit transcend cards you need these 2 patches.
> 
> 
> From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 2001
> From: Aries Lee <arieslee@jmicron.com>
> Date: Wed, 15 Dec 2010 08:14:24 +0100
> Subject: [PATCH] mmc: Test bus-width for old MMC devices
> 
> Some old MMC devices fail with the 4/8 bits the driver tries 
> to use exclusively.  This patch adds a test for the given bus 
> setup and falls back to the lower bit mode (until 1-bit mode) 
> when the test fails.
> 
> [Major rework and refactoring by tiwai]
> [Quirk addition and many fixes by prakity]
> 
> Signed-off-by: Aries Lee <arieslee@jmicron.com>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Philip Rakity <prakity@marvell.com>
> Tested-by: Philip Rakity <prakity@marvell.com>
> Signed-off-by: Chris Ball <cjb@laptop.org>
> ---
>  drivers/mmc/core/mmc.c     |   76 ++++++++++++++++++++-------------
>  drivers/mmc/core/mmc_ops.c |  101 
> ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/core/mmc_ops.h |    1 +
>  drivers/mmc/host/sdhci.c   |    7 +++-
>  drivers/mmc/host/sdhci.h   |    1 +
>  include/linux/mmc/host.h   |    1 +
>  include/linux/mmc/mmc.h    |    2 +
>  7 files changed, 159 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c 
> index 76bb621..1d8409f 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -534,39 +534,57 @@ static int mmc_init_card(struct 
> mmc_host *host, u32 ocr,
>  	 */
>  	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
>  	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
> -		unsigned ext_csd_bit, bus_width;
> -
> -		if (host->caps & MMC_CAP_8_BIT_DATA) {
> -			if (ddr)
> -				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_8;
> -			else
> -				ext_csd_bit = EXT_CSD_BUS_WIDTH_8;
> -			bus_width = MMC_BUS_WIDTH_8;
> -		} else {
> -			if (ddr)
> -				ext_csd_bit = EXT_CSD_DDR_BUS_WIDTH_4;
> -			else
> -				ext_csd_bit = EXT_CSD_BUS_WIDTH_4;
> -			bus_width = MMC_BUS_WIDTH_4;
> +		static unsigned ext_csd_bits[][2] = {
> +			{ EXT_CSD_BUS_WIDTH_8, 
> EXT_CSD_DDR_BUS_WIDTH_8 },
> +			{ EXT_CSD_BUS_WIDTH_4, 
> EXT_CSD_DDR_BUS_WIDTH_4 },
> +			{ EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 },
> +		};
> +		static unsigned bus_widths[] = {
> +			MMC_BUS_WIDTH_8,
> +			MMC_BUS_WIDTH_4,
> +			MMC_BUS_WIDTH_1
> +		};
> +		unsigned idx, bus_width = 0;
> +
> +		if (host->caps & MMC_CAP_8_BIT_DATA)
> +			idx = 0;
> +		else
> +			idx = 1;
> +		for (; idx < ARRAY_SIZE(bus_widths); idx++) {
> +			bus_width = bus_widths[idx];
> +			if (bus_width == MMC_BUS_WIDTH_1)
> +				ddr = 0; /* no DDR for 1-bit width */
> +			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> +					 EXT_CSD_BUS_WIDTH,
> +					 ext_csd_bits[idx][0]);
> +			if (!err) {
> +				/*
> +				 * If controller can't handle 
> bus width test,
> +				 * use the highest bus width to maintain
> +				 * compatibility with previous 
> MMC behavior.
> +				 */
> +				if (!(host->caps & 
> MMC_CAP_BUS_WIDTH_TEST))
> +					break;
> +				mmc_set_bus_width_ddr(card->host,
> +						      
> bus_width, MMC_SDR_MODE);
> +				err = mmc_bus_test(card, bus_width);
> +				if (!err)
> +					break;
> +			}
>  		}
>  
> -		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> -				 EXT_CSD_BUS_WIDTH, ext_csd_bit);
> -
> -		if (err && err != -EBADMSG)
> -			goto free_card;
> -
> +		if (!err && ddr) {
> +			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> +					EXT_CSD_BUS_WIDTH,
> +					ext_csd_bits[idx][1]);
> +		}
>  		if (err) {
>  			printk(KERN_WARNING "%s: switch to bus 
> width %d ddr %d "
> -			       "failed\n", mmc_hostname(card->host),
> -			       1 << bus_width, ddr);
> -			err = 0;
> -		} else {
> -			if (ddr)
> -				mmc_card_set_ddr_mode(card);
> -			else
> -				ddr = MMC_SDR_MODE;
> -
> +				"failed\n", mmc_hostname(card->host),
> +				1 << bus_width, ddr);
> +			goto free_card;
> +		} else if (ddr) {
> +			mmc_card_set_ddr_mode(card);
>  			mmc_set_bus_width_ddr(card->host, 
> bus_width, ddr);
>  		}
>  	}
> diff --git a/drivers/mmc/core/mmc_ops.c 
> b/drivers/mmc/core/mmc_ops.c index 326447c..60842f8 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -462,3 +462,104 @@ int mmc_send_status(struct mmc_card 
> *card, u32 *status)
>  	return 0;
>  }
>  
> +static int
> +mmc_send_bus_test(struct mmc_card *card, struct mmc_host 
> *host, u8 opcode,
> +		  u8 len)
> +{
> +	struct mmc_request mrq;
> +	struct mmc_command cmd;
> +	struct mmc_data data;
> +	struct scatterlist sg;
> +	u8 *data_buf;
> +	u8 *test_buf;
> +	int i, err;
> +	static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
> +	static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
> +
> +	/* dma onto stack is unsafe/nonportable, but callers to this
> +	 * routine normally provide temporary on-stack buffers ...
> +	 */
> +	data_buf = kmalloc(len, GFP_KERNEL);
> +	if (!data_buf)
> +		return -ENOMEM;
> +
> +	if (len == 8)
> +		test_buf = testdata_8bit;
> +	else if (len == 4)
> +		test_buf = testdata_4bit;
> +	else {
> +		printk(KERN_ERR "%s: Invalid bus_width %d\n",
> +		       mmc_hostname(host), len);
> +		kfree(data_buf);
> +		return -EINVAL;
> +	}
> +
> +	if (opcode == MMC_BUS_TEST_W)
> +		memcpy(data_buf, test_buf, len);
> +
> +	memset(&mrq, 0, sizeof(struct mmc_request));
> +	memset(&cmd, 0, sizeof(struct mmc_command));
> +	memset(&data, 0, sizeof(struct mmc_data));
> +
> +	mrq.cmd = &cmd;
> +	mrq.data = &data;
> +	cmd.opcode = opcode;
> +	cmd.arg = 0;
> +
> +	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
> +	 * rely on callers to never use this with "native" 
> calls for reading
> +	 * CSD or CID.  Native versions of those commands use 
> the R2 type,
> +	 * not R1 plus a data block.
> +	 */
> +	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> +
> +	data.blksz = len;
> +	data.blocks = 1;
> +	if (opcode == MMC_BUS_TEST_R)
> +		data.flags = MMC_DATA_READ;
> +	else
> +		data.flags = MMC_DATA_WRITE;
> +
> +	data.sg = &sg;
> +	data.sg_len = 1;
> +	sg_init_one(&sg, data_buf, len);
> +	mmc_wait_for_req(host, &mrq);
> +	err = 0;
> +	if (opcode == MMC_BUS_TEST_R) {
> +		for (i = 0; i < len / 4; i++)
> +			if ((test_buf[i] ^ data_buf[i]) != 0xff) {
> +				err = -EIO;
> +				break;
> +			}
> +	}
> +	kfree(data_buf);
> +
> +	if (cmd.error)
> +		return cmd.error;
> +	if (data.error)
> +		return data.error;
> +
> +	return err;
> +}
> +
> +int mmc_bus_test(struct mmc_card *card, u8 bus_width) {
> +	int err, width;
> +
> +	if (bus_width == MMC_BUS_WIDTH_8)
> +		width = 8;
> +	else if (bus_width == MMC_BUS_WIDTH_4)
> +		width = 4;
> +	else if (bus_width == MMC_BUS_WIDTH_1)
> +		return 0; /* no need for test */
> +	else
> +		return -EINVAL;
> +
> +	/*
> +	 * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
> +	 * is a problem.  This improves chances that the test will work.
> +	 */
> +	mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
> +	err = mmc_send_bus_test(card, card->host, 
> MMC_BUS_TEST_R, width);
> +	return err;
> +}
> diff --git a/drivers/mmc/core/mmc_ops.h 
> b/drivers/mmc/core/mmc_ops.h index 653eb8e..e6d44b8 100644
> --- a/drivers/mmc/core/mmc_ops.h
> +++ b/drivers/mmc/core/mmc_ops.h
> @@ -26,6 +26,7 @@ int mmc_send_cid(struct mmc_host *host, u32 
> *cid);  int mmc_spi_read_ocr(struct mmc_host *host, int 
> highcap, u32 *ocrp);  int mmc_spi_set_crc(struct mmc_host 
> *host, int use_crc);  int mmc_card_sleepawake(struct mmc_host 
> *host, int sleep);
> +int mmc_bus_test(struct mmc_card *card, u8 bus_width);
>  
>  #endif
>  
> diff --git a/drivers/mmc/host/sdhci.c 
> b/drivers/mmc/host/sdhci.c index 5569886..d5febe5 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -23,6 +23,7 @@
>  
>  #include <linux/leds.h>
>  
> +#include <linux/mmc/mmc.h>
>  #include <linux/mmc/host.h>
>  
>  #include "sdhci.h"
> @@ -1521,7 +1522,11 @@ static void sdhci_data_irq(struct 
> sdhci_host *host, u32 intmask)
>  
>  	if (intmask & SDHCI_INT_DATA_TIMEOUT)
>  		host->data->error = -ETIMEDOUT;
> -	else if (intmask & (SDHCI_INT_DATA_CRC | 
> SDHCI_INT_DATA_END_BIT))
> +	else if (intmask & SDHCI_INT_DATA_END_BIT)
> +		host->data->error = -EILSEQ;
> +	else if ((intmask & SDHCI_INT_DATA_CRC) &&
> +		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
> +			!= MMC_BUS_TEST_R)
>  		host->data->error = -EILSEQ;
>  	else if (intmask & SDHCI_INT_ADMA_ERROR) {
>  		printk(KERN_ERR "%s: ADMA error\n", 
> mmc_hostname(host->mmc)); diff --git 
> a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 
> 1efe7dc..6e0969e 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -52,6 +52,7 @@
>  #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
>  
>  #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
> +#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
>  
>  #define SDHCI_RESPONSE		0x10
>  
> diff --git a/include/linux/mmc/host.h 
> b/include/linux/mmc/host.h index 3a85e73..bcb793e 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -172,6 +172,7 @@ struct mmc_host {
>  #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
>  						/* DDR mode at 1.2V */
>  #define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can 
> power off after boot */
> +#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* 
> CMD14/CMD19 bus width ok */
>  
>  	mmc_pm_flag_t		pm_caps;	/* supported pm 
> features */
>  
> diff --git a/include/linux/mmc/mmc.h 
> b/include/linux/mmc/mmc.h index 956fbd87..612301f 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -40,7 +40,9 @@
>  #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr    
>     R1  */
>  #define MMC_STOP_TRANSMISSION    12   /* ac                  
>     R1b */
>  #define MMC_SEND_STATUS          13   /* ac   [31:16] RCA    
>     R1  */
> +#define MMC_BUS_TEST_R           14   /* adtc                
>     R1  */
>  #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA    
>         */
> +#define MMC_BUS_TEST_W           19   /* adtc                
>     R1  */
>  #define MMC_SPI_READ_OCR         58   /* spi                 
>  spi_R3 */
>  #define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag     
>  spi_R1 */
>  
> --
> 1.7.3.5
> 
> 
> 
> From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 2001
> From: Takashi Iwai <tiwai@suse.de>
> Date: Wed, 22 Dec 2010 09:59:44 +0100
> Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call 
> without bus-width-test cap
> 
> With the bus-width test patch, mmc_set_bus_width*() isn't 
> called properly
> when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode.
> This patch fixes the regression by moving the call up before 
> the cap test.
> 
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Reviewed-by: Chris Ball <cjb@laptop.org>
> Signed-off-by: Chris Ball <cjb@laptop.org>
> ---
>  drivers/mmc/core/mmc.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 1d8409f..c86dd73 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -558,6 +558,8 @@ static int mmc_init_card(struct mmc_host 
> *host, u32 ocr,
>  					 EXT_CSD_BUS_WIDTH,
>  					 ext_csd_bits[idx][0]);
>  			if (!err) {
> +				mmc_set_bus_width_ddr(card->host,
> +						      
> bus_width, MMC_SDR_MODE);
>  				/*
>  				 * If controller can't handle 
> bus width test,
>  				 * use the highest bus width to maintain
> @@ -565,8 +567,6 @@ static int mmc_init_card(struct mmc_host 
> *host, u32 ocr,
>  				 */
>  				if (!(host->caps & 
> MMC_CAP_BUS_WIDTH_TEST))
>  					break;
> -				mmc_set_bus_width_ddr(card->host,
> -						      
> bus_width, MMC_SDR_MODE);
>  				err = mmc_bus_test(card, bus_width);
>  				if (!err)
>  					break;
> -- 
> 1.7.3.5
> 
> 
> 
> On Jan 18, 2011, at 4:36 PM, Tomoya MORINAGA wrote:
> 
> > Hi Philip,
> >  
> > On Wednesday, December 01, 2010 10:31 AM, Philip Rakity wrote:
> > > Thanks very much, I'll plan on sending this to Linus 
> tomorrow, along
> > > with the rest of my .37 queue, unless there are any more review
> > > comments from anyone.
> >  
> > We tried to use the MMC card like the following on kernel-2.6.37.
> >  
> > On Tuesday, November 09, 2010 2:40 PM, Tomoya MORINAGA wrote:
> > > I am facing the issue about some MMC cards on Intel EG20T PCH 
> > > (Platform Controller Hub).
> > > The linux version is 2.6.36.
> > > I can not transfer data the MMC cards (e.g. Transcned MMC card).
> > > The card is 1 bit bus width. And the card is according to MMC 
> > > specification V3.x.
> > > And the EG20T has a 4 bit bus width capability Linux MMC 
> > > standard driver decides the card bus width as 4 bit, if the 
> > > MMC specification version is larger than or equal to V4.0 
> like below.
> >  
> > However it seems the issue remains to be seen.
> > Have you fixed the MMC unrecognized issue in kernel-2.6.37?
> >  
> > Thanks,
> > -----------------------------------------
> > Tomoya MORINAGA
> > OKI SEMICONDUCTOR CO., LTD.
> 

[-- Attachment #2: mmc_log --]
[-- Type: application/octet-stream, Size: 125810 bytes --]

 error -84 transferring data, sector 3940338, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940338
mmcblk0: error -84 transferring data, sector 3940339, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940339
mmcblk0: error -84 transferring data, sector 3940340, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940340
mmcblk0: error -84 transferring data, sector 3940341, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940341
mmcblk0: error -84 transferring data, sector 3940342, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940342
mmcblk0: error -84 transferring data, sector 3940343, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940343
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940288, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940288
mmcblk0: error -84 transferring data, sector 3940289, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940289
mmcblk0: error -84 transferring data, sector 3940290, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940290
mmcblk0: error -84 transferring data, sector 3940291, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940291
mmcblk0: error -84 transferring data, sector 3940292, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940292
mmcblk0: error -84 transferring data, sector 3940293, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940293
mmcblk0: error -84 transferring data, sector 3940294, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940294
mmcblk0: error -84 transferring data, sector 3940295, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940295
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940336, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940336
mmcblk0: error -84 transferring data, sector 3940337, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940337
mmcblk0: error -84 transferring data, sector 3940338, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940338
mmcblk0: error -84 transferring data, sector 3940339, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940339
mmcblk0: error -84 transferring data, sector 3940340, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940340
mmcblk0: error -84 transferring data, sector 3940341, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940341
mmcblk0: error -84 transferring data, sector 3940342, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940342
mmcblk0: error -84 transferring data, sector 3940343, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940343
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 3940344, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940344
mmcblk0: error -84 transferring data, sector 3940345, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940345
mmcblk0: error -84 transferring data, sector 3940346, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940346
mmcblk0: error -84 transferring data, sector 3940347, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940347
mmcblk0: error -84 transferring data, sector 3940348, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940348
mmcblk0: error -84 transferring data, sector 3940349, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940349
mmcblk0: error -84 transferring data, sector 3940350, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940350
mmcblk0: error -84 transferring data, sector 3940351, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3940351
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 2048, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2048
mmcblk0: error -84 transferring data, sector 2049, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2049
mmcblk0: error -84 transferring data, sector 2050, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2050
mmcblk0: error -84 transferring data, sector 2051, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2051
mmcblk0: error -84 transferring data, sector 2052, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2052
mmcblk0: error -84 transferring data, sector 2053, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2053
mmcblk0: error -84 transferring data, sector 2054, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2054
mmcblk0: error -84 transferring data, sector 2055, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2055
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 24, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 24
mmcblk0: error -84 transferring data, sector 25, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 25
mmcblk0: error -84 transferring data, sector 26, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 26
mmcblk0: error -84 transferring data, sector 27, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 27
mmcblk0: error -84 transferring data, sector 28, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 28
mmcblk0: error -84 transferring data, sector 29, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 29
mmcblk0: error -84 transferring data, sector 30, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 30
mmcblk0: error -84 transferring data, sector 31, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 31
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 24, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 24
mmcblk0: error -84 transferring data, sector 25, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 25
mmcblk0: error -84 transferring data, sector 26, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 26
mmcblk0: error -84 transferring data, sector 27, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 27
mmcblk0: error -84 transferring data, sector 28, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 28
mmcblk0: error -84 transferring data, sector 29, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 29
mmcblk0: error -84 transferring data, sector 30, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 30
mmcblk0: error -84 transferring data, sector 31, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 31
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 24, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 24
mmcblk0: error -84 transferring data, sector 25, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 25
mmcblk0: error -84 transferring data, sector 26, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 26
mmcblk0: error -84 transferring data, sector 27, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 27
mmcblk0: error -84 transferring data, sector 28, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 28
mmcblk0: error -84 transferring data, sector 29, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 29
mmcblk0: error -84 transferring data, sector 30, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 30
mmcblk0: error -84 transferring data, sector 31, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 31
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 56, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 56
mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 57
mmcblk0: error -84 transferring data, sector 58, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 58
mmcblk0: error -84 transferring data, sector 59, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 59
mmcblk0: error -84 transferring data, sector 60, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 60
mmcblk0: error -84 transferring data, sector 61, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 61
mmcblk0: error -84 transferring data, sector 62, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 62
mmcblk0: error -84 transferring data, sector 63, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 63
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 56, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 56
mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 57
mmcblk0: error -84 transferring data, sector 58, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 58
mmcblk0: error -84 transferring data, sector 59, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 59
mmcblk0: error -84 transferring data, sector 60, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 60
mmcblk0: error -84 transferring data, sector 61, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 61
mmcblk0: error -84 transferring data, sector 62, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 62
mmcblk0: error -84 transferring data, sector 63, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 63
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 56, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 56
mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 57
mmcblk0: error -84 transferring data, sector 58, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 58
mmcblk0: error -84 transferring data, sector 59, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 59
mmcblk0: error -84 transferring data, sector 60, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 60
mmcblk0: error -84 transferring data, sector 61, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 61
mmcblk0: error -84 transferring data, sector 62, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 62
mmcblk0: error -84 transferring data, sector 63, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 63
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 120, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 120
mmcblk0: error -84 transferring data, sector 121, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 121
mmcblk0: error -84 transferring data, sector 122, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 122
mmcblk0: error -84 transferring data, sector 123, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 123
mmcblk0: error -84 transferring data, sector 124, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 124
mmcblk0: error -84 transferring data, sector 125, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 125
mmcblk0: error -84 transferring data, sector 126, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 126
mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 127
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 120, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 120
mmcblk0: error -84 transferring data, sector 121, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 121
mmcblk0: error -84 transferring data, sector 122, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 122
mmcblk0: error -84 transferring data, sector 123, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 123
mmcblk0: error -84 transferring data, sector 124, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 124
mmcblk0: error -84 transferring data, sector 125, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 125
mmcblk0: error -84 transferring data, sector 126, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 126
mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 127
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 120, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 120
mmcblk0: error -84 transferring data, sector 121, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 121
mmcblk0: error -84 transferring data, sector 122, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 122
mmcblk0: error -84 transferring data, sector 123, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 123
mmcblk0: error -84 transferring data, sector 124, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 124
mmcblk0: error -84 transferring data, sector 125, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 125
mmcblk0: error -84 transferring data, sector 126, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 126
mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 127
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 24, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 24
mmcblk0: error -84 transferring data, sector 25, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 25
mmcblk0: error -84 transferring data, sector 26, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 26
mmcblk0: error -84 transferring data, sector 27, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 27
mmcblk0: error -84 transferring data, sector 28, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 28
mmcblk0: error -84 transferring data, sector 29, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 29
mmcblk0: error -84 transferring data, sector 30, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 30
mmcblk0: error -84 transferring data, sector 31, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 31
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 24, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 24
mmcblk0: error -84 transferring data, sector 25, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 25
mmcblk0: error -84 transferring data, sector 26, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 26
mmcblk0: error -84 transferring data, sector 27, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 27
mmcblk0: error -84 transferring data, sector 28, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 28
mmcblk0: error -84 transferring data, sector 29, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 29
mmcblk0: error -84 transferring data, sector 30, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 30
mmcblk0: error -84 transferring data, sector 31, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 31
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 56, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 56
mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 57
mmcblk0: error -84 transferring data, sector 58, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 58
mmcblk0: error -84 transferring data, sector 59, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 59
mmcblk0: error -84 transferring data, sector 60, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 60
mmcblk0: error -84 transferring data, sector 61, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 61
mmcblk0: error -84 transferring data, sector 62, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 62
mmcblk0: error -84 transferring data, sector 63, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 63
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 56, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 56
mmcblk0: error -84 transferring data, sector 57, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 57
mmcblk0: error -84 transferring data, sector 58, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 58
mmcblk0: error -84 transferring data, sector 59, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 59
mmcblk0: error -84 transferring data, sector 60, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 60
mmcblk0: error -84 transferring data, sector 61, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 61
mmcblk0: error -84 transferring data, sector 62, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 62
mmcblk0: error -84 transferring data, sector 63, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 63
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 120, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 120
mmcblk0: error -84 transferring data, sector 121, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 121
mmcblk0: error -84 transferring data, sector 122, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 122
mmcblk0: error -84 transferring data, sector 123, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 123
mmcblk0: error -84 transferring data, sector 124, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 124
mmcblk0: error -84 transferring data, sector 125, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 125
mmcblk0: error -84 transferring data, sector 126, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 126
mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 127
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 120, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 120
mmcblk0: error -84 transferring data, sector 121, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 121
mmcblk0: error -84 transferring data, sector 122, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 122
mmcblk0: error -84 transferring data, sector 123, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 123
mmcblk0: error -84 transferring data, sector 124, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 124
mmcblk0: error -84 transferring data, sector 125, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 125
mmcblk0: error -84 transferring data, sector 126, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 126
mmcblk0: error -84 transferring data, sector 127, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 127
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
quiet_error: 204 callbacks suppressed
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 16, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 16
mmcblk0: error -84 transferring data, sector 17, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 17
mmcblk0: error -84 transferring data, sector 18, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 18
mmcblk0: error -84 transferring data, sector 19, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 19
mmcblk0: error -84 transferring data, sector 20, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 20
mmcblk0: error -84 transferring data, sector 21, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 21
mmcblk0: error -84 transferring data, sector 22, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 22
mmcblk0: error -84 transferring data, sector 23, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 23
Buffer I/O error on device mmcblk0, logical block 2
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
Buffer I/O error on device mmcblk0, logical block 16
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
Buffer I/O error on device mmcblk0, logical block 16
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
Buffer I/O error on device mmcblk0, logical block 16
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 16, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 16
mmcblk0: error -84 transferring data, sector 17, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 17
mmcblk0: error -84 transferring data, sector 18, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 18
mmcblk0: error -84 transferring data, sector 19, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 19
mmcblk0: error -84 transferring data, sector 20, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 20
mmcblk0: error -84 transferring data, sector 21, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 21
mmcblk0: error -84 transferring data, sector 22, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 22
mmcblk0: error -84 transferring data, sector 23, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 23
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 64, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 64
mmcblk0: error -84 transferring data, sector 65, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 65
mmcblk0: error -84 transferring data, sector 66, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 66
mmcblk0: error -84 transferring data, sector 67, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 67
mmcblk0: error -84 transferring data, sector 68, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 68
mmcblk0: error -84 transferring data, sector 69, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 69
mmcblk0: error -84 transferring data, sector 70, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 70
mmcblk0: error -84 transferring data, sector 71, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 71
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 256, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 256
mmcblk0: error -84 transferring data, sector 257, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 257
mmcblk0: error -84 transferring data, sector 258, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 258
mmcblk0: error -84 transferring data, sector 259, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 259
mmcblk0: error -84 transferring data, sector 260, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 260
mmcblk0: error -84 transferring data, sector 261, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 261
mmcblk0: error -84 transferring data, sector 262, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 262
mmcblk0: error -84 transferring data, sector 263, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 263
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 16, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 16
mmcblk0: error -84 transferring data, sector 17, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 17
mmcblk0: error -84 transferring data, sector 18, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 18
mmcblk0: error -84 transferring data, sector 19, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 19
mmcblk0: error -84 transferring data, sector 20, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 20
mmcblk0: error -84 transferring data, sector 21, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 21
mmcblk0: error -84 transferring data, sector 22, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 22
mmcblk0: error -84 transferring data, sector 23, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 23
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 16, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 16
mmcblk0: error -84 transferring data, sector 17, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 17
mmcblk0: error -84 transferring data, sector 18, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 18
mmcblk0: error -84 transferring data, sector 19, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 19
mmcblk0: error -84 transferring data, sector 20, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 20
mmcblk0: error -84 transferring data, sector 21, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 21
mmcblk0: error -84 transferring data, sector 22, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 22
mmcblk0: error -84 transferring data, sector 23, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 23
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 16, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 16
mmcblk0: error -84 transferring data, sector 17, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 17
mmcblk0: error -84 transferring data, sector 18, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 18
mmcblk0: error -84 transferring data, sector 19, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 19
mmcblk0: error -84 transferring data, sector 20, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 20
mmcblk0: error -84 transferring data, sector 21, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 21
mmcblk0: error -84 transferring data, sector 22, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 22
mmcblk0: error -84 transferring data, sector 23, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 23
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 8, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 8
mmcblk0: error -84 transferring data, sector 9, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 9
mmcblk0: error -84 transferring data, sector 10, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 10
mmcblk0: error -84 transferring data, sector 11, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 11
mmcblk0: error -84 transferring data, sector 12, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 12
mmcblk0: error -84 transferring data, sector 13, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 13
mmcblk0: error -84 transferring data, sector 14, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 14
mmcblk0: error -84 transferring data, sector 15, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 15
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 128, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 128
mmcblk0: error -84 transferring data, sector 129, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 129
mmcblk0: error -84 transferring data, sector 130, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 130
mmcblk0: error -84 transferring data, sector 131, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 131
mmcblk0: error -84 transferring data, sector 132, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 132
mmcblk0: error -84 transferring data, sector 133, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 133
mmcblk0: error -84 transferring data, sector 134, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 134
mmcblk0: error -84 transferring data, sector 135, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 135
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 4096, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4096
mmcblk0: error -84 transferring data, sector 4097, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4097
mmcblk0: error -84 transferring data, sector 4098, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4098
mmcblk0: error -84 transferring data, sector 4099, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4099
mmcblk0: error -84 transferring data, sector 4100, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4100
mmcblk0: error -84 transferring data, sector 4101, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4101
mmcblk0: error -84 transferring data, sector 4102, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4102
mmcblk0: error -84 transferring data, sector 4103, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4103
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7
mmcblk0: retrying using single block read
mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -84 transferring data, sector 1, nr 7, card status 0x900
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900
end_request: I/O error, dev mmcblk0, sector 2
mmcblk0: error -84 transferring data, sector 3, nr 5, card status 0x900
end_request: I/O error, dev mmcblk0, sector 3
mmcblk0: error -84 transferring data, sector 4, nr 4, card status 0x900
end_request: I/O error, dev mmcblk0, sector 4
mmcblk0: error -84 transferring data, sector 5, nr 3, card status 0x900
end_request: I/O error, dev mmcblk0, sector 5
mmcblk0: error -84 transferring data, sector 6, nr 2, card status 0x900
end_request: I/O error, dev mmcblk0, sector 6
mmcblk0: error -84 transferring data, sector 7, nr 1, card status 0x900
end_request: I/O error, dev mmcblk0, sector 7

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-19  6:05           ` Philip Rakity
  2011-01-19  6:30             ` Tomoya MORINAGA
@ 2011-01-19 17:42             ` Chris Ball
  2011-01-19 23:49               ` Tomoya MORINAGA
  2011-01-26  8:28               ` Tomoya MORINAGA
  1 sibling, 2 replies; 20+ messages in thread
From: Chris Ball @ 2011-01-19 17:42 UTC (permalink / raw)
  To: Philip Rakity
  Cc: Tomoya MORINAGA, Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com

Hi,

On Tue, Jan 18, 2011 at 10:05:04PM -0800, Philip Rakity wrote:
> 
> For 1 bit transcend cards you need these 2 patches.
> 
> >From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 2001
> From: Aries Lee <arieslee@jmicron.com>
> Date: Wed, 15 Dec 2010 08:14:24 +0100
> Subject: [PATCH] mmc: Test bus-width for old MMC devices

Present in 2.6.38-rc1.

> >From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 2001
> From: Takashi Iwai <tiwai@suse.de>
> Date: Wed, 22 Dec 2010 09:59:44 +0100
> Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap

Also present in 2.6.38-rc1.

So, please re-test against 2.6.38-rc1 and let us know whether you still
have problems.  Thanks,

-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child

^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-19 17:42             ` Chris Ball
@ 2011-01-19 23:49               ` Tomoya MORINAGA
  2011-01-26  8:28               ` Tomoya MORINAGA
  1 sibling, 0 replies; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-19 23:49 UTC (permalink / raw)
  To: 'Chris Ball', 'Philip Rakity'
  Cc: 'Kyungmin Park', linux-mmc, linux-kernel,
	andrew.chih.howe.khor, kok.howg.ewe, Toshiharu Okada

Hi Chris,

Thank you for your information.
We will test using 2.6.38-rc1 and report to you.
 
Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.


> -----Original Message-----
> From: Chris Ball [mailto:cjb@laptop.org] 
> Sent: Thursday, January 20, 2011 2:43 AM
> To: Philip Rakity
> Cc: Tomoya MORINAGA; Kyungmin Park; 
> linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; 
> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
> Subject: Re: A MMC card transfer issue
> 
> Hi,
> 
> On Tue, Jan 18, 2011 at 10:05:04PM -0800, Philip Rakity wrote:
> > 
> > For 1 bit transcend cards you need these 2 patches.
> > 
> > >From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 
> > >2001
> > From: Aries Lee <arieslee@jmicron.com>
> > Date: Wed, 15 Dec 2010 08:14:24 +0100
> > Subject: [PATCH] mmc: Test bus-width for old MMC devices
> 
> Present in 2.6.38-rc1.
> 
> > >From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 
> > >2001
> > From: Takashi Iwai <tiwai@suse.de>
> > Date: Wed, 22 Dec 2010 09:59:44 +0100
> > Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without 
> > bus-width-test cap
> 
> Also present in 2.6.38-rc1.
> 
> So, please re-test against 2.6.38-rc1 and let us know whether 
> you still have problems.  Thanks,
> 
> -- 
> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
> One Laptop Per Child
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-19 17:42             ` Chris Ball
  2011-01-19 23:49               ` Tomoya MORINAGA
@ 2011-01-26  8:28               ` Tomoya MORINAGA
  2011-01-26 15:42                 ` Philip Rakity
  1 sibling, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-26  8:28 UTC (permalink / raw)
  To: 'Chris Ball', 'Philip Rakity'
  Cc: 'Kyungmin Park', linux-mmc, linux-kernel,
	andrew.chih.howe.khor, kok.howg.ewe

On Thursday, January 20, 2011 2:43 AM, Chris Ball wrote
> So, please re-test against 2.6.38-rc1 and let us know whether 
> you still have problems.  Thanks,
I have tested the latest "2.6.38-rc2".
However, the issue remains to be seen.

Thanks in advance,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.

> -----Original Message-----
> From: Chris Ball [mailto:cjb@laptop.org] 
> Sent: Thursday, January 20, 2011 2:43 AM
> To: Philip Rakity
> Cc: Tomoya MORINAGA; Kyungmin Park; 
> linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; 
> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
> Subject: Re: A MMC card transfer issue
> 
> Hi,
> 
> On Tue, Jan 18, 2011 at 10:05:04PM -0800, Philip Rakity wrote:
> > 
> > For 1 bit transcend cards you need these 2 patches.
> > 
> > >From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 
> > >2001
> > From: Aries Lee <arieslee@jmicron.com>
> > Date: Wed, 15 Dec 2010 08:14:24 +0100
> > Subject: [PATCH] mmc: Test bus-width for old MMC devices
> 
> Present in 2.6.38-rc1.
> 
> > >From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 
> > >2001
> > From: Takashi Iwai <tiwai@suse.de>
> > Date: Wed, 22 Dec 2010 09:59:44 +0100
> > Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without 
> > bus-width-test cap
> 
> Also present in 2.6.38-rc1.
> 
> So, please re-test against 2.6.38-rc1 and let us know whether 
> you still have problems.  Thanks,
> 
> -- 
> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
> One Laptop Per Child
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-26  8:28               ` Tomoya MORINAGA
@ 2011-01-26 15:42                 ` Philip Rakity
  2011-01-27  1:00                   ` Tomoya MORINAGA
  0 siblings, 1 reply; 20+ messages in thread
From: Philip Rakity @ 2011-01-26 15:42 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: Chris Ball, Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com


Did you define the CAP for BUS WIDTH ? 

MMC_CAP_BUS_WIDTH_TEST 

in the driver or the platform driver ?

Philip


On Jan 26, 2011, at 12:28 AM, Tomoya MORINAGA wrote:

> On Thursday, January 20, 2011 2:43 AM, Chris Ball wrote
>> So, please re-test against 2.6.38-rc1 and let us know whether 
>> you still have problems.  Thanks,
> I have tested the latest "2.6.38-rc2".
> However, the issue remains to be seen.
> 
> Thanks in advance,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.
> 
>> -----Original Message-----
>> From: Chris Ball [mailto:cjb@laptop.org] 
>> Sent: Thursday, January 20, 2011 2:43 AM
>> To: Philip Rakity
>> Cc: Tomoya MORINAGA; Kyungmin Park; 
>> linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org; 
>> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
>> Subject: Re: A MMC card transfer issue
>> 
>> Hi,
>> 
>> On Tue, Jan 18, 2011 at 10:05:04PM -0800, Philip Rakity wrote:
>>> 
>>> For 1 bit transcend cards you need these 2 patches.
>>> 
>>>> From 22113efd00491310da802f3b1a9a66cfcf415fac Mon Sep 17 00:00:00 
>>>> 2001
>>> From: Aries Lee <arieslee@jmicron.com>
>>> Date: Wed, 15 Dec 2010 08:14:24 +0100
>>> Subject: [PATCH] mmc: Test bus-width for old MMC devices
>> 
>> Present in 2.6.38-rc1.
>> 
>>>> From 08c82dfad2458f8f9b83126224a85e7ea9e2b046 Mon Sep 17 00:00:00 
>>>> 2001
>>> From: Takashi Iwai <tiwai@suse.de>
>>> Date: Wed, 22 Dec 2010 09:59:44 +0100
>>> Subject: [PATCH] mmc: fix mmc_set_bus_width_ddr() call without 
>>> bus-width-test cap
>> 
>> Also present in 2.6.38-rc1.
>> 
>> So, please re-test against 2.6.38-rc1 and let us know whether 
>> you still have problems.  Thanks,
>> 
>> -- 
>> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
>> One Laptop Per Child
>> 
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-26 15:42                 ` Philip Rakity
@ 2011-01-27  1:00                   ` Tomoya MORINAGA
  2011-01-27  1:03                     ` Philip Rakity
  0 siblings, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-27  1:00 UTC (permalink / raw)
  To: 'Philip Rakity'
  Cc: 'Chris Ball', 'Kyungmin Park', linux-mmc,
	linux-kernel, andrew.chih.howe.khor, kok.howg.ewe

Hi Philip,

On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
> Did you define the CAP for BUS WIDTH ? 
> 
> MMC_CAP_BUS_WIDTH_TEST 
> 
> in the driver or the platform driver ?

Let me make the above meaning clear.

I don't modify kernel source code "drivers/mmc" at all
Is the above mean I must modify something kernel source code ?

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-27  1:00                   ` Tomoya MORINAGA
@ 2011-01-27  1:03                     ` Philip Rakity
  2011-01-27  1:31                       ` Tomoya MORINAGA
  0 siblings, 1 reply; 20+ messages in thread
From: Philip Rakity @ 2011-01-27  1:03 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: Chris Ball, Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com


yes

you need to have the driver or the low level code enable this QUIRK.

which mmc driver are you using.

On Jan 26, 2011, at 5:00 PM, Tomoya MORINAGA wrote:

> Hi Philip,
> 
> On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
>> Did you define the CAP for BUS WIDTH ? 
>> 
>> MMC_CAP_BUS_WIDTH_TEST 
>> 
>> in the driver or the platform driver ?
> 
> Let me make the above meaning clear.
> 
> I don't modify kernel source code "drivers/mmc" at all
> Is the above mean I must modify something kernel source code ?
> 
> Thanks,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-27  1:03                     ` Philip Rakity
@ 2011-01-27  1:31                       ` Tomoya MORINAGA
  2011-01-27  1:43                         ` Philip Rakity
  0 siblings, 1 reply; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-27  1:31 UTC (permalink / raw)
  To: 'Philip Rakity'
  Cc: 'Chris Ball', 'Kyungmin Park', linux-mmc,
	linux-kernel, andrew.chih.howe.khor, kok.howg.ewe,
	'Toshiharu Okada'

Hi Philip,

> which MMC driver are you using.
Could you teach me how to get the information ?

> you need to have the driver or the low level code enable this QUIRK.
BTW, Is the above permanent treatment?
I think modifying kernel source code isn't preferred.

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.

> -----Original Message-----
> From: Philip Rakity [mailto:prakity@marvell.com] 
> Sent: Thursday, January 27, 2011 10:04 AM
> To: Tomoya MORINAGA
> Cc: Chris Ball; Kyungmin Park; linux-mmc@vger.kernel.org; 
> linux-kernel@vger.kernel.org; 
> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
> Subject: Re: A MMC card transfer issue
> 
> 
> yes
> 
> you need to have the driver or the low level code enable this QUIRK.
> 
> which mmc driver are you using.
> 
> On Jan 26, 2011, at 5:00 PM, Tomoya MORINAGA wrote:
> 
> > Hi Philip,
> > 
> > On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
> >> Did you define the CAP for BUS WIDTH ? 
> >> 
> >> MMC_CAP_BUS_WIDTH_TEST
> >> 
> >> in the driver or the platform driver ?
> > 
> > Let me make the above meaning clear.
> > 
> > I don't modify kernel source code "drivers/mmc" at all Is the above 
> > mean I must modify something kernel source code ?
> > 
> > Thanks,
> > -----------------------------------------
> > Tomoya MORINAGA
> > OKI SEMICONDUCTOR CO., LTD.
> > 
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: A MMC card transfer issue
  2011-01-27  1:31                       ` Tomoya MORINAGA
@ 2011-01-27  1:43                         ` Philip Rakity
  2011-01-27  3:20                           ` Tomoya MORINAGA
  0 siblings, 1 reply; 20+ messages in thread
From: Philip Rakity @ 2011-01-27  1:43 UTC (permalink / raw)
  To: Tomoya MORINAGA
  Cc: Chris Ball, Kyungmin Park, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, andrew.chih.howe.khor@intel.com,
	kok.howg.ewe@intel.com, Toshiharu Okada


There is no good answer.  

Doing this patch for 2.6.20 or so a long time ago had problems because some controllers did not work.  The failures were equally unpleasant.

The failure you see today is at least not a regression since 1 bit did not work before.  

We hope that developers who know their h/w works add the CAP. 


On Jan 26, 2011, at 5:31 PM, Tomoya MORINAGA wrote:

> Hi Philip,
> 
>> which MMC driver are you using.
> Could you teach me how to get the information ?
> 
>> you need to have the driver or the low level code enable this QUIRK.
> BTW, Is the above permanent treatment?
> I think modifying kernel source code isn't preferred.
> 
> Thanks,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.
> 
>> -----Original Message-----
>> From: Philip Rakity [mailto:prakity@marvell.com] 
>> Sent: Thursday, January 27, 2011 10:04 AM
>> To: Tomoya MORINAGA
>> Cc: Chris Ball; Kyungmin Park; linux-mmc@vger.kernel.org; 
>> linux-kernel@vger.kernel.org; 
>> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com
>> Subject: Re: A MMC card transfer issue
>> 
>> 
>> yes
>> 
>> you need to have the driver or the low level code enable this QUIRK.
>> 
>> which mmc driver are you using.
>> 
>> On Jan 26, 2011, at 5:00 PM, Tomoya MORINAGA wrote:
>> 
>>> Hi Philip,
>>> 
>>> On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
>>>> Did you define the CAP for BUS WIDTH ? 
>>>> 
>>>> MMC_CAP_BUS_WIDTH_TEST
>>>> 
>>>> in the driver or the platform driver ?
>>> 
>>> Let me make the above meaning clear.
>>> 
>>> I don't modify kernel source code "drivers/mmc" at all Is the above 
>>> mean I must modify something kernel source code ?
>>> 
>>> Thanks,
>>> -----------------------------------------
>>> Tomoya MORINAGA
>>> OKI SEMICONDUCTOR CO., LTD.
>>> 
>> 
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

* RE: A MMC card transfer issue
  2011-01-27  1:43                         ` Philip Rakity
@ 2011-01-27  3:20                           ` Tomoya MORINAGA
  0 siblings, 0 replies; 20+ messages in thread
From: Tomoya MORINAGA @ 2011-01-27  3:20 UTC (permalink / raw)
  To: 'Philip Rakity'
  Cc: 'Chris Ball', 'Kyungmin Park', linux-mmc,
	linux-kernel, andrew.chih.howe.khor, kok.howg.ewe,
	'Toshiharu Okada'

Hi Philip,

> which MMC driver are you using.
According to boot message, it seems sdhci.c is loaded.

Do I add only  "mmc->caps |=  MMC_CAP_BUS_WIDTH_TEST" in sdhc.c ?

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.

> -----Original Message-----
> From: Philip Rakity [mailto:prakity@marvell.com] 
> Sent: Thursday, January 27, 2011 10:44 AM
> To: Tomoya MORINAGA
> Cc: Chris Ball; Kyungmin Park; linux-mmc@vger.kernel.org; 
> linux-kernel@vger.kernel.org; 
> andrew.chih.howe.khor@intel.com; kok.howg.ewe@intel.com; 
> Toshiharu Okada
> Subject: Re: A MMC card transfer issue
> 
> 
> There is no good answer.  
> 
> Doing this patch for 2.6.20 or so a long time ago had 
> problems because some controllers did not work.  The failures 
> were equally unpleasant.
> 
> The failure you see today is at least not a regression since 
> 1 bit did not work before.  
> 
> We hope that developers who know their h/w works add the CAP. 
> 
> 
> On Jan 26, 2011, at 5:31 PM, Tomoya MORINAGA wrote:
> 
> > Hi Philip,
> > 
> >> which MMC driver are you using.
> > Could you teach me how to get the information ?
> > 
> >> you need to have the driver or the low level code enable 
> this QUIRK.
> > BTW, Is the above permanent treatment?
> > I think modifying kernel source code isn't preferred.
> > 
> > Thanks,
> > -----------------------------------------
> > Tomoya MORINAGA
> > OKI SEMICONDUCTOR CO., LTD.
> > 
> >> -----Original Message-----
> >> From: Philip Rakity [mailto:prakity@marvell.com]
> >> Sent: Thursday, January 27, 2011 10:04 AM
> >> To: Tomoya MORINAGA
> >> Cc: Chris Ball; Kyungmin Park; linux-mmc@vger.kernel.org; 
> >> linux-kernel@vger.kernel.org; andrew.chih.howe.khor@intel.com; 
> >> kok.howg.ewe@intel.com
> >> Subject: Re: A MMC card transfer issue
> >> 
> >> 
> >> yes
> >> 
> >> you need to have the driver or the low level code enable 
> this QUIRK.
> >> 
> >> which mmc driver are you using.
> >> 
> >> On Jan 26, 2011, at 5:00 PM, Tomoya MORINAGA wrote:
> >> 
> >>> Hi Philip,
> >>> 
> >>> On Thursday, January 27, 2011 12:42 AM, Philip Rakity wrote:
> >>>> Did you define the CAP for BUS WIDTH ? 
> >>>> 
> >>>> MMC_CAP_BUS_WIDTH_TEST
> >>>> 
> >>>> in the driver or the platform driver ?
> >>> 
> >>> Let me make the above meaning clear.
> >>> 
> >>> I don't modify kernel source code "drivers/mmc" at all Is 
> the above 
> >>> mean I must modify something kernel source code ?
> >>> 
> >>> Thanks,
> >>> -----------------------------------------
> >>> Tomoya MORINAGA
> >>> OKI SEMICONDUCTOR CO., LTD.
> >>> 
> >> 
> > 
> 


^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2011-01-27  3:21 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-09  5:39 A MMC card transfer issue Tomoya MORINAGA
2010-11-09  5:53 ` Kyungmin Park
2010-11-09  7:29   ` Tomoya MORINAGA
2010-11-11  2:59   ` Tomoya MORINAGA
2010-12-01  1:08     ` Tomoya MORINAGA
     [not found]       ` <2D50F985-2383-4406-8514-DFE462A5F546@marvell.com>
     [not found]         ` <4D2E0464ABB54FFF9C10583336E27879@hacdom.okisemi.com>
2011-01-19  0:59           ` Philip Rakity
2011-01-19  1:29             ` Tomoya MORINAGA
2011-01-19  1:41               ` Chris Ball
2011-01-19  3:12                 ` Philip Rakity
2011-01-19  6:05           ` Philip Rakity
2011-01-19  6:30             ` Tomoya MORINAGA
2011-01-19 17:42             ` Chris Ball
2011-01-19 23:49               ` Tomoya MORINAGA
2011-01-26  8:28               ` Tomoya MORINAGA
2011-01-26 15:42                 ` Philip Rakity
2011-01-27  1:00                   ` Tomoya MORINAGA
2011-01-27  1:03                     ` Philip Rakity
2011-01-27  1:31                       ` Tomoya MORINAGA
2011-01-27  1:43                         ` Philip Rakity
2011-01-27  3:20                           ` Tomoya MORINAGA

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox