From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: LKML <linux-kernel@vger.kernel.org>,
David Miller <davem@davemloft.net>,
Steven Rostedt <rostedt@goodmis.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@elte.hu>
Subject: Re: [patch 1/3] introduce __u64_packed_aligned, __u64_aligned and U64_ALIGN() for structure alignment in custom sections
Date: Wed, 19 Jan 2011 22:29:28 -0500 [thread overview]
Message-ID: <20110120032928.GA26165@Krystal> (raw)
In-Reply-To: <20110120032556.830942589@efficios.com>
* Mathieu Desnoyers (mathieu.desnoyers@efficios.com) wrote:
> Problem description:
>
Argh, Nack-for-myself for the whole patchset. A missing quilt refresh messed up
my patches. Sorry about that, will repost shortly.
Mathieu
> gcc happily align on 32-byte structures defined statically. Ftrace trace events
> and Tracepoints both statically define structures into custom sections (using
> the "section" attribute), to then assign these to symbols with the linker
> scripts to iterate the these sections as an array.
>
> However, gcc uses different alignments for these structures when they are
> defined statically than when they are globally visible and/or in an array.
> Therefore iteration on these arrays sees "holes" of padding. gcc is within its
> rights to increase the alignment of the statically defined structures because,
> normally, there should be no other accesses to them than in the local object. We
> are actually iterating on the generated structures as if they were an array
> without letting gcc knowing anything about it.
>
> This patch introduces __u64_packed_aligned and __u64_aligned to force gcc to use
> the u64 type alignment, up-aligning or down-aligning the target type if
> necessary. The memory accesses to the target structure are efficient (does not
> require bytewise memory accesses) and the atomic pointer update guarantees
> required by RCU are kept. u64 is considered as the largest type that can
> generate a trap for unaligned accesses (u64 on sparc32 needs to be aligned on
> 64-bit).
>
> Specifying both "packed" and "aligned" generates decent code (without the
> bytewise memory accesses generated by simply using "packed"), and forces
> gcc to down-align the structure alignment to the alignment of a u64 type. This
> down-alignment provided by "packed" guarantees that the structure alignment
> for the type declaration will match the alignment of the custom structure, and
> won't be larger than the alignment of the start of the custom section in the
> linker script.
>
> This alignment should be used for both structure definitions and declarations
> (as *both* the type and variable attribute) when using the "section"
> attribute to generate arrays of structures. Declarations should use the
> __u64_packed_aligned macro. Definitions should use the __u64_aligned macro. We
> cannot have one single macro for both, because the use of __u64_packed_aligned
> with variable definitions causes "warning: â__packed__â attribute ignored"
> messages. This is understandable because the "aligned" variable attribute
> enforces a strict alignment (compared to the "aligned" type attribute which only
> specifies a minimum alignment, hence requiring the "packed" attribute too). This
> is explained by the gcc Variable Attributes documentation: "When used as part of
> a typedef, the aligned attribute can both increase and decrease alignment, and
> specifying the packed attribute will generate a warning." The type attribute
> takes care of appropriately iterating on the extern array, therefore, no
> variable attribute needs to be applied to the extern array definition.
>
> Also introduce the linker script U64_ALIGN() macro for specification of custom
> section alignment that matches that of __u64_packed_aligned and __u64_aligned.
>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
> CC: David Miller <davem@davemloft.net>
> CC: Steven Rostedt <rostedt@goodmis.org>
> CC: Frederic Weisbecker <fweisbec@gmail.com>
> CC: Ingo Molnar <mingo@elte.hu>
> ---
> include/asm-generic/vmlinux.lds.h | 6 +++
> include/linux/align-section.h | 62 ++++++++++++++++++++++++++++++++++++++
> include/linux/compiler.h | 14 ++++++++
> 3 files changed, 82 insertions(+)
>
> Index: linux-2.6-lttng/include/linux/compiler.h
> ===================================================================
> --- linux-2.6-lttng.orig/include/linux/compiler.h
> +++ linux-2.6-lttng/include/linux/compiler.h
> @@ -57,6 +57,20 @@ extern void __chk_io_ptr(const volatile
> # include <linux/compiler-intel.h>
> #endif
>
> +#include <linux/align-section.h>
> +
> +/*
> + * Use as variable attribute for custom section structure definition.
> + * It should also be applied to any static or extern definition of the
> + * structure that would override the definition to which the "section"
> + * attribute is applied, e.g.
> + *
> + * extern struct __u64_aligned custom;
> + * struct custom __u64_aligned __attribute__((section("__custom")) identifier;
> + */
> +#define __u64_aligned \
> + __attribute__((__aligned__(__alignof__(long long))))
> +
> /*
> * Generic compiler-dependent macros required for kernel
> * build go below this comment. Actual compiler/compiler version
> Index: linux-2.6-lttng/include/asm-generic/vmlinux.lds.h
> ===================================================================
> --- linux-2.6-lttng.orig/include/asm-generic/vmlinux.lds.h
> +++ linux-2.6-lttng/include/asm-generic/vmlinux.lds.h
> @@ -69,6 +69,12 @@
> */
> #define STRUCT_ALIGN() . = ALIGN(32)
>
> +/*
> + * Align to a 8 byte boundary. For use with custom section made from structures
> + * declared with __u64_packed_aligned and defined with __u64_aligned.
> + */
> +#define U64_ALIGN() . = ALIGN(8)
> +
> /* The actual configuration determine if the init/exit sections
> * are handled as text/data or they can be discarded (which
> * often happens at runtime)
> Index: linux-2.6-lttng/include/linux/align-section.h
> ===================================================================
> --- /dev/null
> +++ linux-2.6-lttng/include/linux/align-section.h
> @@ -0,0 +1,62 @@
> +#ifndef _LINUX_ALIGN_SECTION_H
> +#define _LINUX_ALIGN_SECTION_H
> +
> +/*
> + * __u64_packed_aligned and __u64_aligned:
> + *
> + * __u64_aligned should be used as type attribute for structure definitions, and
> + * __u64_packed_aligned as type attribute for structure declaration when using
> + * the "section" attribute to generate arrays of structures. U64_ALIGN() must be
> + * used prior to these section definitions in the linker script.
> + *
> + * It forces the compiler to use the u64 type alignment, up-aligning or
> + * down-aligning the target type if necessary. The memory accesses to the target
> + * structure are efficient (does not require bytewise memory accesses) and the
> + * atomic pointer update guarantees required by RCU are kept. u64 is considered
> + * as the largest type that can generate a trap for unaligned accesses (u64 on
> + * sparc32 needs to be aligned on 64-bit).
> + *
> + * Specifying both "packed" and "aligned" generates decent code (without the
> + * bytewise memory accesses generated by simply using "packed"), and forces
> + * gcc to down-align the structure alignment to the alignment of a u64 type.
> + */
> +
> +/*
> + * Use __u64_packed_aligned as type attribute for custom section structure
> + * declaration, e.g.
> + *
> + * struct custom {
> + * unsigned long field;
> + * ...
> + * } __u64_packed_aligned;
> + *
> + * The array can then be defined with:
> + *
> + * extern struct custom __start___custom[];
> + * extern struct custom __stop___custom[];
> + *
> + * With linking performed by the linker script:
> + *
> + * U64_ALIGN();
> + * VMLINUX_SYMBOL(__start___custom) = .;
> + * *(__custom)
> + * VMLINUX_SYMBOL(__stop___custom) = .;
> + */
> +
> +#define __u64_packed_aligned \
> + __attribute__((__packed__, __aligned__(__alignof__(long long))))
> +
> +/*
> + * Use __u64_aligned as variable attribute for custom section structure
> + * definition. It should also be applied to any static or extern definition of
> + * the structure that would override the definition to which the "section"
> + * attribute is applied, e.g.
> + *
> + * extern struct __u64_aligned custom;
> + * struct custom __u64_aligned __attribute__((section("__custom")) identifier;
> + */
> +
> +#define __u64_aligned \
> + __attribute__((__aligned__(__alignof__(long long))))
> +
> +#endif /* _LINUX_ALIGN_SECTION_H */
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
next prev parent reply other threads:[~2011-01-20 3:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-20 3:17 [patch 0/3] Fix alignment of custom sections made from structures Mathieu Desnoyers
2011-01-20 3:17 ` [patch 1/3] introduce __u64_packed_aligned, __u64_aligned and U64_ALIGN() for structure alignment in custom sections Mathieu Desnoyers
2011-01-20 3:29 ` Mathieu Desnoyers [this message]
2011-01-20 3:17 ` [patch 2/3] tracing: use __u64_packed_aligned as type and variable attribute Mathieu Desnoyers
2011-01-20 3:17 ` [patch 3/3] tracepoints: use __u64_packed_aligned() " Mathieu Desnoyers
-- strict thread matches above, loose matches on Subject: below --
2011-01-20 5:01 [patch 0/3] Fix alignment of custom sections made from structures (v2) Mathieu Desnoyers
2011-01-20 5:01 ` [patch 1/3] introduce __u64_packed_aligned, __u64_aligned and U64_ALIGN() for structure alignment in custom sections Mathieu Desnoyers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110120032928.GA26165@Krystal \
--to=mathieu.desnoyers@efficios.com \
--cc=davem@davemloft.net \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox