From: Ingo Molnar <mingo@elte.hu>
To: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: hpa@zytor.com, tglx@linutronix.de, Andreas.Herrmann3@amd.com,
linux-kernel@vger.kernel.org, x86@kernel.org
Subject: Re: [PATCH 4/4] x86, amd: Support L3 Cache Partitioning on AMD family 0x15 CPUs
Date: Wed, 26 Jan 2011 21:56:08 +0100 [thread overview]
Message-ID: <20110126205608.GA14361@elte.hu> (raw)
In-Reply-To: <1296061716-185599-1-git-send-email-hans.rosenfeld@amd.com>
* Hans Rosenfeld <hans.rosenfeld@amd.com> wrote:
> L3 Cache Partitioning allows selecting which of the 4 L3 subcaches can
> be used for evictions by the L2 cache of each compute unit. By writing a
> 4-bit hexadecimal mask into the the sysfs file /sys/devices/system/cpu/\
> cpuX/cache/index3/subcaches, the user can set the enabled subcaches for
> a CPU. The settings are directly read from and written to the hardware,
> so there is no way to have contradicting settings for two CPUs belonging
> to the same compute unit. Writing will always overwrite any previous
> setting for a compute unit.
>
> Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
> ---
> arch/x86/include/asm/amd_nb.h | 3 +
> arch/x86/kernel/amd_nb.c | 57 ++++++++++++++++++++++++
> arch/x86/kernel/cpu/intel_cacheinfo.c | 77 +++++++++++++++++++++++++++-----
> 3 files changed, 125 insertions(+), 12 deletions(-)
>
> diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
> index 3e70700..423f11c 100644
> --- a/arch/x86/include/asm/amd_nb.h
> +++ b/arch/x86/include/asm/amd_nb.h
> @@ -18,6 +18,8 @@ extern int amd_cache_northbridges(void);
> extern void amd_flush_garts(void);
> extern int amd_numa_init(unsigned long start_pfn, unsigned long end_pfn);
> extern int amd_scan_nodes(void);
> +extern int amd_get_subcaches(int);
> +extern int amd_set_subcaches(int, int);
>
> #ifdef CONFIG_NUMA_EMU
> extern void amd_fake_nodes(const struct bootnode *nodes, int nr_nodes);
> @@ -38,6 +40,7 @@ extern struct amd_northbridge_info amd_northbridges;
>
> #define AMD_NB_GART 0x1
> #define AMD_NB_L3_INDEX_DISABLE 0x2
> +#define AMD_NB_L3_PARTITIONING 0x4
>
> #ifdef CONFIG_AMD_NB
>
> diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
> index 4ae9a96..63310de 100644
> --- a/arch/x86/kernel/amd_nb.c
> +++ b/arch/x86/kernel/amd_nb.c
> @@ -95,6 +95,10 @@ int amd_cache_northbridges(void)
> if (boot_cpu_data.x86 == 0x15)
> amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;
>
> + /* L3 cache partitioning is supported on family 0x15 */
> + if (boot_cpu_data.x86 == 0x15)
> + amd_northbridges.flags |= AMD_NB_L3_PARTITIONING;
> +
> return 0;
> }
> EXPORT_SYMBOL_GPL(amd_cache_northbridges);
> @@ -112,6 +116,59 @@ int __init early_is_amd_nb(u32 device)
> return 0;
> }
>
> +#ifdef CONFIG_SMP
> +int amd_get_subcaches(int cpu)
Well, sprinkling it with CONFIG_SMP is pretty ugly. Also, there's no fundamental
reason why this shouldnt work with UP. Yes, it makes most sense on SMP but such code
should be SMP-invariant.
Thanks,
Ingo
next prev parent reply other threads:[~2011-01-26 20:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-24 15:05 [PATCH 0/4] x86, amd: family 0x15 L3 cache features Hans Rosenfeld
2011-01-24 15:05 ` [PATCH 1/4] x86, amd: Normalize compute unit IDs on multi-node processors Hans Rosenfeld
2011-01-26 10:57 ` [tip:x86/amd-nb] " tip-bot for Andreas Herrmann
2011-02-14 14:30 ` Ingo Molnar
2011-02-14 17:14 ` [PATCH] x86, amd: Fix uninitialized variable warning Borislav Petkov
2011-02-15 3:10 ` [tip:x86/amd-nb] x86, amd: Initialize variable properly tip-bot for Borislav Petkov
2011-02-04 22:07 ` [PATCH 1/4] x86, amd: Normalize compute unit IDs on multi-node processors Andrew Morton
2011-01-24 15:05 ` [PATCH 2/4] x86, amd: Enable L3 cache index disable on family 0x15 Hans Rosenfeld
2011-01-26 10:58 ` [tip:x86/amd-nb] " tip-bot for Hans Rosenfeld
2011-01-24 15:05 ` [PATCH 3/4] x86, amd: Extend AMD northbridge caching code to support "Link Control" devices Hans Rosenfeld
2011-01-26 10:58 ` [tip:x86/amd-nb] " tip-bot for Hans Rosenfeld
2011-01-24 15:05 ` [PATCH 4/4] x86, amd: Support L3 Cache Partitioning on AMD family 0x15 CPUs Hans Rosenfeld
2011-01-26 10:56 ` Ingo Molnar
2011-01-26 17:05 ` Hans Rosenfeld
2011-01-26 17:08 ` Hans Rosenfeld
2011-01-26 20:56 ` Ingo Molnar [this message]
2011-01-27 11:50 ` Hans Rosenfeld
2011-01-27 12:47 ` Ingo Molnar
2011-02-01 15:14 ` Hans Rosenfeld
2011-02-07 17:10 ` Hans Rosenfeld
2011-02-08 12:03 ` [tip:x86/amd-nb] " tip-bot for Hans Rosenfeld
-- strict thread matches above, loose matches on Subject: below --
2010-12-20 17:13 [PATCH 0/4] x86, amd: family 0x15 L3 cache features Hans Rosenfeld
2010-12-20 17:13 ` [PATCH 4/4] x86, amd: Support L3 Cache Partitioning on AMD family 0x15 CPUs Hans Rosenfeld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110126205608.GA14361@elte.hu \
--to=mingo@elte.hu \
--cc=Andreas.Herrmann3@amd.com \
--cc=hans.rosenfeld@amd.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox