Re: [EDAC-AMD64] Display correct RAM sizes in ganged mode on F10 CPUs

[Borislav Petkov <bp@amd64.org>]

On Thu, Feb 03, 2011 at 10:59:52AM -0500, Markus Trippelsdorf wrote:
> Hm, that doesn't work:
> 
> EDAC amd64: F10h detected (node 0).
> EDAC MC: DCT0 chip selects:
> EDAC amd64: MC: 0:  1024MB 1:  1024MB
> EDAC amd64: MC: 2:  1024MB 3:  1024MB
> EDAC amd64: MC: 4:     0MB 5:     0MB
> EDAC amd64: MC: 6:     0MB 7:     0MB
> EDAC MC: DCT1 chip selects:
> EDAC amd64: MC: 0:     0MB 1:     0MB
> EDAC amd64: MC: 2:     0MB 3:     0MB
> EDAC amd64: MC: 4:     0MB 5:     0MB
> EDAC amd64: MC: 6:     0MB 7:     0MB
> EDAC amd64: using x4 syndromes.

Of course it doesn't, doh!, we need the DRAM chip selects from the
second DCT too. Can you please run this little script as root so that I
can verify that BIOS is actually programming sensible values in those in
ganged mode? (Yeah, leave your DCT setting to ganged in BIOS).

--
#!/bin/bash

i=0x140

while (( $i <= 0x15c )); do
        reg=$(printf "0x%x" $i)
        setpci -s 18.2 $reg.l
        i=$(($i+4))
done
--

Thanks.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
General Managers: Alberto Bozzo, Andrew Bowd
Registration: Dornach, Gemeinde Aschheim, Landkreis Muenchen
Registergericht Muenchen, HRB Nr. 43632