From: Marc Koschewski <marc@osknowledge.org>
To: linux-kernel@vger.kernel.org, bskeggs@redhat.com
Subject: [REGRESSION? 2.6.38-rc4] nouveau NV50 screen freeze
Date: Fri, 11 Feb 2011 09:24:55 +0100 [thread overview]
Message-ID: <20110211082455.GA16802@marc.osknowledge.org> (raw)
Hi all,
I don't know if I suffer a regression of nouveau in 2.6.38-rc4.
It feels like the screens tends to freeze often in that version but I cannot be
sure if it is the 2.6.38-rc4 release or something else.
The current 2.6.37 kernel has this in Xorg.0.log:
[ 71.783] (II) AutoAddDevices is off - not adding device.
[ 78.808] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 78.808] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 79.422] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 79.422] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 80.115] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 80.115] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 80.729] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 80.729] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 507.789] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 507.789] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 567.978] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 567.978] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
The current 2.6.38-rc4 kernel has this in Xorg.0.log:
[ 75.466] (II) AutoAddDevices is off - not adding device.
[ 89.585] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 89.585] (II) NOUVEAU(0): NVLeaveVT is called.
[ 97.577] (II) Open ACPI successful (/var/run/acpid.socket)
[ 97.578] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 97.578] (II) NOUVEAU(0): NVEnterVT is called.
[ 97.691] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 97.691] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 98.322] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 957.921] (II) 3rd Button detected: disabling emulate3Button
[ 2852.323] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2852.323] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2855.850] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2855.850] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2855.850] (II) NOUVEAU(0): NVEnterVT is called.
[ 2855.966] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2855.966] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2856.597] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2863.361] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2863.361] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2879.447] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2879.447] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2879.447] (II) NOUVEAU(0): NVEnterVT is called.
[ 2879.561] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2879.561] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2880.192] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2884.543] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2884.543] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2890.337] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2890.337] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2890.337] (II) NOUVEAU(0): NVEnterVT is called.
[ 2890.451] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2890.451] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2891.081] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2895.780] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2895.780] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2917.475] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2917.475] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2917.475] (II) NOUVEAU(0): NVEnterVT is called.
[ 2917.588] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2917.588] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2918.219] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2921.735] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2921.735] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2988.993] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2988.993] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2988.993] (II) NOUVEAU(0): NVEnterVT is called.
[ 2989.107] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2989.107] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2989.738] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2997.111] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2997.111] (II) NOUVEAU(0): NVLeaveVT is called.
[ 2997.952] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2997.952] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2997.952] (II) NOUVEAU(0): NVEnterVT is called.
[ 2998.065] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 2998.065] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 2998.700] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 2999.201] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2999.201] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3045.403] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3045.404] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3045.404] (II) NOUVEAU(0): NVEnterVT is called.
[ 3045.519] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 3045.519] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 3046.151] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 3118.308] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3118.308] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3119.091] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3119.091] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3119.091] (II) NOUVEAU(0): NVEnterVT is called.
[ 3119.204] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561
[ 3119.204] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz)
[ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz)
[ 3119.838] (II) Configured Mouse: ps2EnableDataReporting: succeeded
[ 3120.522] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3120.522] (II) NOUVEAU(0): NVLeaveVT is called.
[ 3125.951] (II) UnloadModule: "mouse"
[ 3125.951] (II) UnloadModule: "kbd"
[ 3125.961] (II) NOUVEAU(0): Closed GPU channel 2
[ 3125.976] (WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call
but I don't know if it's related to the screen freeze. Does anyone experience
the similar behavior?
Regards,
Marc
--
Marc Koschewski
reply other threads:[~2011-02-11 8:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110211082455.GA16802@marc.osknowledge.org \
--to=marc@osknowledge.org \
--cc=bskeggs@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox