* [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed
@ 2011-03-03 13:58 Dave Young
2011-03-03 14:59 ` Don Zickus
0 siblings, 1 reply; 5+ messages in thread
From: Dave Young @ 2011-03-03 13:58 UTC (permalink / raw)
To: Andrew Morton, Ingo Molnar, David Miller, Don Zickus,
linux-kernel
proc_dointvec doesn't check extra minmax params, use proc_dointvec_minmax
instead of proc_dointvec for cases need boundaries check.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
---
kernel/sysctl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- linux-2.6.orig/kernel/sysctl.c 2011-03-03 10:44:53.000000000 +0800
+++ linux-2.6/kernel/sysctl.c 2011-03-03 11:02:43.736663258 +0800
@@ -374,7 +374,7 @@ static struct ctl_table kern_table[] = {
.data = &sysctl_sched_autogroup_enabled,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
.extra2 = &one,
},
@@ -1204,7 +1204,7 @@ static struct ctl_table vm_table[] = {
.data = &block_dump,
.maxlen = sizeof(block_dump),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
},
{
@@ -1212,7 +1212,7 @@ static struct ctl_table vm_table[] = {
.data = &sysctl_vfs_cache_pressure,
.maxlen = sizeof(sysctl_vfs_cache_pressure),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
},
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
@@ -1221,7 +1221,7 @@ static struct ctl_table vm_table[] = {
.data = &sysctl_legacy_va_layout,
.maxlen = sizeof(sysctl_legacy_va_layout),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
},
#endif
@@ -1231,7 +1231,7 @@ static struct ctl_table vm_table[] = {
.data = &zone_reclaim_mode,
.maxlen = sizeof(zone_reclaim_mode),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
},
{
@@ -1287,7 +1287,7 @@ static struct ctl_table vm_table[] = {
.data = &vdso_enabled,
.maxlen = sizeof(vdso_enabled),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
.extra1 = &zero,
},
#endif
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed
2011-03-03 13:58 [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed Dave Young
@ 2011-03-03 14:59 ` Don Zickus
2011-03-04 1:41 ` Dave Young
0 siblings, 1 reply; 5+ messages in thread
From: Don Zickus @ 2011-03-03 14:59 UTC (permalink / raw)
To: Dave Young; +Cc: Andrew Morton, Ingo Molnar, David Miller, linux-kernel
On Thu, Mar 03, 2011 at 09:58:20PM +0800, Dave Young wrote:
> proc_dointvec doesn't check extra minmax params, use proc_dointvec_minmax
> instead of proc_dointvec for cases need boundaries check.
Is this patch needed, if you are basically changing it again in patches 3
and 5?
Cheers,
Don
>
> Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
> ---
> kernel/sysctl.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> --- linux-2.6.orig/kernel/sysctl.c 2011-03-03 10:44:53.000000000 +0800
> +++ linux-2.6/kernel/sysctl.c 2011-03-03 11:02:43.736663258 +0800
> @@ -374,7 +374,7 @@ static struct ctl_table kern_table[] = {
> .data = &sysctl_sched_autogroup_enabled,
> .maxlen = sizeof(unsigned int),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> .extra2 = &one,
> },
> @@ -1204,7 +1204,7 @@ static struct ctl_table vm_table[] = {
> .data = &block_dump,
> .maxlen = sizeof(block_dump),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> },
> {
> @@ -1212,7 +1212,7 @@ static struct ctl_table vm_table[] = {
> .data = &sysctl_vfs_cache_pressure,
> .maxlen = sizeof(sysctl_vfs_cache_pressure),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> },
> #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
> @@ -1221,7 +1221,7 @@ static struct ctl_table vm_table[] = {
> .data = &sysctl_legacy_va_layout,
> .maxlen = sizeof(sysctl_legacy_va_layout),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> },
> #endif
> @@ -1231,7 +1231,7 @@ static struct ctl_table vm_table[] = {
> .data = &zone_reclaim_mode,
> .maxlen = sizeof(zone_reclaim_mode),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> },
> {
> @@ -1287,7 +1287,7 @@ static struct ctl_table vm_table[] = {
> .data = &vdso_enabled,
> .maxlen = sizeof(vdso_enabled),
> .mode = 0644,
> - .proc_handler = proc_dointvec,
> + .proc_handler = proc_dointvec_minmax,
> .extra1 = &zero,
> },
> #endif
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed
2011-03-03 14:59 ` Don Zickus
@ 2011-03-04 1:41 ` Dave Young
2011-03-04 14:04 ` Don Zickus
0 siblings, 1 reply; 5+ messages in thread
From: Dave Young @ 2011-03-04 1:41 UTC (permalink / raw)
To: Don Zickus; +Cc: Andrew Morton, Ingo Molnar, David Miller, linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3775 bytes --]
On Thu, Mar 3, 2011 at 10:59 PM, Don Zickus <dzickus@redhat.com> wrote:
> On Thu, Mar 03, 2011 at 09:58:20PM +0800, Dave Young wrote:
>> proc_dointvec doesn't check extra minmax params, use proc_dointvec_minmax
>> instead of proc_dointvec for cases need boundaries check.
>
> Is this patch needed, if you are basically changing it again in patches 3
> and 5?
Sure if 3 and 5 is acked, if someone object them then this is good?
>
> Cheers,
> Don
>
>>
>> Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
>> ---
>> Â kernel/sysctl.c | Â 12 ++++++------
>> Â 1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> --- linux-2.6.orig/kernel/sysctl.c   2011-03-03 10:44:53.000000000 +0800
>> +++ linux-2.6/kernel/sysctl.c 2011-03-03 11:02:43.736663258 +0800
>> @@ -374,7 +374,7 @@ static struct ctl_table kern_table[] = {
>>        .data      = &sysctl_sched_autogroup_enabled,
>>        .maxlen     = sizeof(unsigned int),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â Â Â Â Â .extra2 Â Â Â Â = &one,
>> Â Â Â },
>> @@ -1204,7 +1204,7 @@ static struct ctl_table vm_table[] = {
>>        .data      = &block_dump,
>>        .maxlen     = sizeof(block_dump),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â },
>> Â Â Â {
>> @@ -1212,7 +1212,7 @@ static struct ctl_table vm_table[] = {
>>        .data      = &sysctl_vfs_cache_pressure,
>>        .maxlen     = sizeof(sysctl_vfs_cache_pressure),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â },
>> Â #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
>> @@ -1221,7 +1221,7 @@ static struct ctl_table vm_table[] = {
>>        .data      = &sysctl_legacy_va_layout,
>>        .maxlen     = sizeof(sysctl_legacy_va_layout),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â },
>> Â #endif
>> @@ -1231,7 +1231,7 @@ static struct ctl_table vm_table[] = {
>>        .data      = &zone_reclaim_mode,
>>        .maxlen     = sizeof(zone_reclaim_mode),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â },
>> Â Â Â {
>> @@ -1287,7 +1287,7 @@ static struct ctl_table vm_table[] = {
>>        .data      = &vdso_enabled,
>>        .maxlen     = sizeof(vdso_enabled),
>>        .mode      = 0644,
>> -       .proc_handler  = proc_dointvec,
>> +       .proc_handler  = proc_dointvec_minmax,
>> Â Â Â Â Â Â Â .extra1 Â Â Â Â = &zero,
>> Â Â Â },
>> Â #endif
>
--
Regards
dave
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed
2011-03-04 1:41 ` Dave Young
@ 2011-03-04 14:04 ` Don Zickus
2011-03-04 15:21 ` Dave Young
0 siblings, 1 reply; 5+ messages in thread
From: Don Zickus @ 2011-03-04 14:04 UTC (permalink / raw)
To: Dave Young; +Cc: Andrew Morton, Ingo Molnar, David Miller, linux-kernel
On Fri, Mar 04, 2011 at 09:41:59AM +0800, Dave Young wrote:
> On Thu, Mar 3, 2011 at 10:59 PM, Don Zickus <dzickus@redhat.com> wrote:
> > On Thu, Mar 03, 2011 at 09:58:20PM +0800, Dave Young wrote:
> >> proc_dointvec doesn't check extra minmax params, use proc_dointvec_minmax
> >> instead of proc_dointvec for cases need boundaries check.
> >
> > Is this patch needed, if you are basically changing it again in patches 3
> > and 5?
>
> Sure if 3 and 5 is acked, if someone object them then this is good?
Ok. I guess I would have posted patches 2-4 first to get everyone's
opinion. Then if the reaction was negative, try with patch 1.
Personally I don't see any problems with patches 2-4. Then again I don't
deal with sysctl that much, so I don't what rules there are in that area of
code.
Cheers,
Don
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed
2011-03-04 14:04 ` Don Zickus
@ 2011-03-04 15:21 ` Dave Young
0 siblings, 0 replies; 5+ messages in thread
From: Dave Young @ 2011-03-04 15:21 UTC (permalink / raw)
To: Don Zickus; +Cc: Andrew Morton, Ingo Molnar, David Miller, linux-kernel
On Fri, Mar 4, 2011 at 10:04 PM, Don Zickus <dzickus@redhat.com> wrote:
> On Fri, Mar 04, 2011 at 09:41:59AM +0800, Dave Young wrote:
>> On Thu, Mar 3, 2011 at 10:59 PM, Don Zickus <dzickus@redhat.com> wrote:
>> > On Thu, Mar 03, 2011 at 09:58:20PM +0800, Dave Young wrote:
>> >> proc_dointvec doesn't check extra minmax params, use proc_dointvec_minmax
>> >> instead of proc_dointvec for cases need boundaries check.
>> >
>> > Is this patch needed, if you are basically changing it again in patches 3
>> > and 5?
>>
>> Sure if 3 and 5 is acked, if someone object them then this is good?
>
> Ok. I guess I would have posted patches 2-4 first to get everyone's
> opinion. Then if the reaction was negative, try with patch 1.
>
> Personally I don't see any problems with patches 2-4. Then again I don't
> deal with sysctl that much, so I don't what rules there are in that area of
> code.
No problem, I will try resend 2-4 with first one merged, Thanks.
--
Regards
dave
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-03-04 15:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-03 13:58 [PATCH 01/05] use proc_dointvec_minmax to check boundaries while needed Dave Young
2011-03-03 14:59 ` Don Zickus
2011-03-04 1:41 ` Dave Young
2011-03-04 14:04 ` Don Zickus
2011-03-04 15:21 ` Dave Young
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox