Re: [REVIEW] NVM Express driver

[Greg KH <greg@kroah.com>]

On Thu, Mar 03, 2011 at 09:25:47PM -0500, Andy Lutomirski wrote:
> On 03/03/2011 05:22 PM, Greg KH wrote:
> >On Thu, Mar 03, 2011 at 05:07:35PM -0500, Matthew Wilcox wrote:
> >>On Thu, Mar 03, 2011 at 01:51:55PM -0800, Greg KH wrote:
> >>>Heh, no, well, submit_io should just go through the block layer and not
> >>>be a separate ioctl, right?
> >>
> >>Just like with SG_IO, there are reasons to do I/Os without going through
> >>the block layer.
> >
> >Ok, that makes sense.
> >
> >>>>There's a bit of an impedence mismatch there.  Think of this as
> >>>>being drive firmware instead of controller firmware.  This isn't for
> >>>>request_firmware() kind of uses, it's for some admin tool to come along
> >>>>and tell the drive "Oh, here's some new firmware for you".
> >>>
> >>>That's fine, request_firmware will work wonderfully for that.
> >>
> >>How would the driver know that it should call request_firmware()?
> >>Do it every 60 seconds in case somebody's downloaded some new firmware?
> >
> >Ick, no, just use the function provided that lets you create a firmware
> >request and be notified when it is written to,
> >request_firmware_nowait().  That is what it is there for.
> >
> >>>>If you look at the spec [1], you'll see there are a number of firmware
> >>>>slots in the device, and it's up to the managability utility to decide
> >>>>which one to replace or activate.  I dno't think you want to pull all
> >>>>that gnarly decision making code into the kernel, do you?
> >>>>
> >>>>[1] http://download.intel.com/standards/nvmhci/NVM_Express_1_0_Gold.pdf
> >>>
> >>>No, just export multiple "slots" as firmware devices ready to be filled
> >>>in by userspace whenever it wants/needs to.  The management utility can
> >>>just dump the firmware to those sysfs files when it determines it needs
> >>>to update the firmware, no decision making in the kernel at all.
> >>
> >>OK ... glad we decided to limit the number of slots.  I still don't see
> >>(in Documentation/firmware_class/README) how this works for user-initiated
> >>firmware updates rather than kernel-initiated.
> >
> >I didn't even realize we had a firmware README file...
> >
> >Anyway, just use request_firmware_nowait(), you will be fine.
> >
> 
> Unless I'm misunderstanding the spec, this is for *nonvolatile*
> firmware updates.  So if I have two of these devices and I stick a
> firmware file into /lib/firmware, should it update both devices?
> 
> Shouldn't reflashing the device firmware be something that the users
> asks for by something a little more specific than just creating a
> file?  (In any case, creating /lib/firmware/nvmhci-3 to flash slot 3
> seems rather silly.)

Yes, a userspace tool should handle all of this, much like Dell does
this with BIOS updates through this same interface.  See their in-kernel
code, and userspace tools for details on how to do this sanely.

thanks,

greg k-h