Re: [PATCH] uio_netx: Add support for netPLC cards

["Hans J. Koch" <hjk@hansjkoch.de>]

On Thu, Mar 17, 2011 at 11:40:59AM +0000, Daniel Trautmann wrote:
> This patch adds support for Hilscher / IBHsoftec netPLC cards to uio_netx userspace IO driver.
> 
> Signed-off-by: Daniel Trautmann <dtrautmann@ibhsoftec-sps.de>
> ---
>  drivers/uio/uio_netx.c |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)

Against what kernel is that supposed to apply? It doesn't apply against
Linus' current tree here.

And, please, run your patch through scripts/checkpatch.pl before posting it.

I get:
-----------------------
total: 15 errors, 16 warnings, 37 lines checked

NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
      scripts/cleanfile
-----------------------
I find 15 errors in 19 insertions a bit too much. Most of it is whitespace,
so it might be a problem with your mail client. Please check.

> 
> diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
> index 5ffdb48..7921190 100644
> --- a/drivers/uio/uio_netx.c
> +++ b/drivers/uio/uio_netx.c
> @@ -18,6 +18,9 @@
>  
>  #define PCI_VENDOR_ID_HILSCHER         0x15CF
>  #define PCI_DEVICE_ID_HILSCHER_NETX    0x0000
> +#define PCI_DEVICE_ID_HILSCHER_NETPLC  0x0010

Hmpf, yes... The three defines above should go to include/linux/pci_ids.h

I should have done that from the beginning, could you fix it now?

> +#define PCI_SUBDEVICE_ID_NETPLC_RAM    0x0000
> +#define PCI_SUBDEVICE_ID_NETPLC_FLASH  0x0001
>  #define PCI_SUBDEVICE_ID_NXSB_PCA      0x3235
>  #define PCI_SUBDEVICE_ID_NXPCA         0x3335
>  
> @@ -66,6 +69,10 @@ static int __devinit netx_pci_probe(struct pci_dev *dev,
>                 bar = 0;
>                 info->name = "netx";
>                 break;
> +       case PCI_DEVICE_ID_HILSCHER_NETPLC:
> +               bar = 0;
> +               info->name = "netplc";
> +               break;
>         default:
>                 bar = 2;
>                 info->name = "netx_plx";
> @@ -133,6 +140,18 @@ static struct pci_device_id netx_pci_ids[] = {
>                 .subvendor =    0,
>                 .subdevice =    0,
>         },
> +        {
> +                .vendor =       PCI_VENDOR_ID_HILSCHER,
> +                .device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
> +                .subvendor =    PCI_VENDOR_ID_HILSCHER,
> +                .subdevice =    PCI_SUBDEVICE_ID_NETPLC_RAM,
> +        },
> +        {
> +                .vendor =       PCI_VENDOR_ID_HILSCHER,
> +                .device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
> +                .subvendor =    PCI_VENDOR_ID_HILSCHER,
> +                .subdevice =    PCI_SUBDEVICE_ID_NETPLC_FLASH,
> +        },
>         {
>                 .vendor =       PCI_VENDOR_ID_PLX,
>                 .device =       PCI_DEVICE_ID_PLX_9030,
> 

Otherwise, the patch looks alright to me. Please post a new version that
applies against the current kernel, and fix the whitespace errors. If it is
a problem with your mail client, you should send the mail to yourself first.
Save it, and run it through checkpatch.

Thanks,
Hans