[PATCH V5 1/4] ARM: Xilinx: Adding Xilinx board support

[PATCH V5 1/4] ARM: Xilinx: Adding Xilinx board support

[John Linn]

The 1st board support is minimal to get a system up and running
on the Xilinx platform.

Signed-off-by: John Linn <john.linn@xilinx.com>
---

V5 Changes
	Minor cleanup based on input from Jamie Iles.
	Update to work with code in next merge (PLAT_PHYS_OFFSET).

V4 Changes
	Minor cleanup based on input from Jamie Iles.

V3 Changes

Updates based on Russell Kings' comments
	Changed headers to update the license info and remove
	the address

	Changed the name of functions to include "xilinx" in 
	common.c and common.h

Changed the Kconfig and Makefile to use MACH_XILINX which
matches the machine registered.

V2 Changes

Updates based on Russell King's comments	
	minor cleanups
	cleaned up physical/virtual addresses in early i/o table		

 arch/arm/mach-xilinx/Kconfig       |   14 +++++
 arch/arm/mach-xilinx/Makefile      |    7 ++
 arch/arm/mach-xilinx/Makefile.boot |    3 +
 arch/arm/mach-xilinx/board_ep107.c |   85 +++++++++++++++++++++++++++
 arch/arm/mach-xilinx/common.c      |  114 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-xilinx/common.h      |   30 +++++++++
 6 files changed, 253 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-xilinx/Kconfig
 create mode 100644 arch/arm/mach-xilinx/Makefile
 create mode 100644 arch/arm/mach-xilinx/Makefile.boot
 create mode 100644 arch/arm/mach-xilinx/board_ep107.c
 create mode 100644 arch/arm/mach-xilinx/common.c
 create mode 100644 arch/arm/mach-xilinx/common.h

diff --git a/arch/arm/mach-xilinx/Kconfig b/arch/arm/mach-xilinx/Kconfig
new file mode 100644
index 0000000..01181d2
--- /dev/null
+++ b/arch/arm/mach-xilinx/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_XILINX
+
+choice
+        prompt "Board Selection"
+	default MACH_XILINX_EP107
+
+config MACH_XILINX_EP107
+	bool "Xilinx EP107 Board"
+	help
+	  Select if you are using a Xilinx EP107 board.
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-xilinx/Makefile b/arch/arm/mach-xilinx/Makefile
new file mode 100644
index 0000000..19489e7
--- /dev/null
+++ b/arch/arm/mach-xilinx/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y 				:= common.o
+obj-$(CONFIG_MACH_XILINX_EP107)	+= board_ep107.o
diff --git a/arch/arm/mach-xilinx/Makefile.boot b/arch/arm/mach-xilinx/Makefile.boot
new file mode 100644
index 0000000..67039c3
--- /dev/null
+++ b/arch/arm/mach-xilinx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-xilinx/board_ep107.c b/arch/arm/mach-xilinx/board_ep107.c
new file mode 100644
index 0000000..f6abe3f
--- /dev/null
+++ b/arch/arm/mach-xilinx/board_ep107.c
@@ -0,0 +1,85 @@
+/* arch/arm/mach-xilinx/board_ep107.c
+ *
+ * This file contains code specific to the Xilinx EP107 board.
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * based on /arch/arm/mach-realview/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clkdev.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/xilinx_soc.h>
+#include <mach/irqs.h>
+#include <mach/memory.h>
+#include "common.h"
+
+/*
+ * Fixed clocks for now
+ */
+
+static struct clk ref50_clk = {
+	.rate	= 50000000,
+};
+
+/* Create all the platform devices for the board */
+
+static struct resource uart0[] = {
+	{
+		.start = UART0_PHYS,
+		.end = UART0_PHYS + 0xFFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_UART0,
+		.end = IRQ_UART0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device uart_device0 = {
+	.name = "xuartpss",
+	.id = 0,
+	.dev = {
+		.platform_data = &ref50_clk.rate,
+	},
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct platform_device *xilinx_pdevices[] __initdata = {
+	&uart_device0,
+};
+
+/**
+ * board_ep107_init - Board specific initialization for the Xilinx EP107 board.
+ *
+ **/
+static void __init board_ep107_init(void)
+{
+	xilinx_system_init();
+	platform_add_devices(&xilinx_pdevices[0], ARRAY_SIZE(xilinx_pdevices));
+}
+
+MACHINE_START(XILINX_EP107, "Xilinx EP107")
+	.boot_params    = PLAT_PHYS_OFFSET + 0x00000100,
+	.map_io         = xilinx_map_io,
+	.init_irq       = xilinx_irq_init,
+	.init_machine   = board_ep107_init,
+	.timer          = &xttcpss_sys_timer,
+MACHINE_END
diff --git a/arch/arm/mach-xilinx/common.c b/arch/arm/mach-xilinx/common.c
new file mode 100644
index 0000000..83b549d
--- /dev/null
+++ b/arch/arm/mach-xilinx/common.c
@@ -0,0 +1,114 @@
+/* arch/arm/mach-xilinx/common.c
+ *
+ * This file contains common code that is intended to be used across
+ * boards so that it's not replicated.
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/xilinx_soc.h>
+#include <mach/clkdev.h>
+#include "common.h"
+
+/*
+ * Clock function infrastructure.
+ */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+/**
+ * system_init - System specific initialization, intended to be called from
+ *			board specific initialization.
+ *
+ **/
+void __init xilinx_system_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * 64KB way size, 8-way associativity, parity disabled
+	 */
+	l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
+#endif
+}
+
+/**
+ * irq_init - Interrupt controller initialization for the GIC.
+ *
+ **/
+void __init xilinx_irq_init(void)
+{
+	gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+}
+
+/* The minimum devices needed to be mapped before the VM system is up and
+ * running include the GIC, UART and Timer Counter.
+ */
+
+static struct map_desc io_desc[] __initdata = {
+	{
+		.virtual	= TTC0_VIRT,
+		.pfn		= __phys_to_pfn(TTC0_PHYS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= SCU_PERIPH_VIRT,
+		.pfn		= __phys_to_pfn(SCU_PERIPH_PHYS),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= PL310_L2CC_VIRT,
+		.pfn		= __phys_to_pfn(PL310_L2CC_PHYS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= UART0_VIRT,
+		.pfn		= __phys_to_pfn(UART0_PHYS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+
+};
+
+/**
+ * map_io - Create memory mappings needed for early I/O.
+ *
+ **/
+void __init xilinx_map_io(void)
+{
+	iotable_init(io_desc, ARRAY_SIZE(io_desc));
+}
diff --git a/arch/arm/mach-xilinx/common.h b/arch/arm/mach-xilinx/common.h
new file mode 100644
index 0000000..71f4ebc
--- /dev/null
+++ b/arch/arm/mach-xilinx/common.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-xilinx/common.h
+ *
+ * This file contains common function prototypes to avoid externs
+ * in the c files.
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_XILINX_COMMON_H__
+#define __MACH_XILINX_COMMON_H__
+
+#include <linux/init.h>
+#include <asm/mach/time.h>
+
+void __init xilinx_system_init(void);
+void __init xilinx_irq_init(void);
+void __init xilinx_map_io(void);
+
+extern struct sys_timer xttcpss_sys_timer;
+
+#endif
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

[PATCH V5 2/4] ARM: Xilinx: Adding timer support to the platform

[John Linn]

The timer driver supports the Xilinx PS Timer Counter IP.

Signed-off-by: Kiran Sutariya <kiran.sutariya@einfochips.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
---

V5 Changes
	Minor cleanup based on input from Jamie Iles for sparse.
	Removed CLOCK_TICK_RATE based on input from Arnd.

V4 Changes
	Minor cleanup based on input from Jamie Iles.
		Got rid of unused mode.
		Removed un-needed initialization.
		Made interrupt handler setup unconditional.

V3 Changes

Updates based on Russell Kings' comments
	Changed headers to update the license info and remove
	the address

V2 Changes

The timer code was changed quite a bit based on review inputs. It
got much smaller and cleaner I think.

Updates based on Russell King's comments	
	minor cleanups for documentation comments
	removed the name from the timer structure
	removed interrupt for clock source 
	moved to using clock functions provided in the kernel
		for calculating shift/mult values
	removed PM code as generic handles it

Updated based on Jamie Iles's comment
	cleaned up ENABLE_MASK which was confusing
	now using platform_add_devices() from platform code
	moved base_addr to void __iomem pointer
	removed stop of the event timer in one shot mode

 arch/arm/mach-xilinx/Makefile |    2 +-
 arch/arm/mach-xilinx/timer.c  |  297 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 298 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-xilinx/timer.c

diff --git a/arch/arm/mach-xilinx/Makefile b/arch/arm/mach-xilinx/Makefile
index 19489e7..62787ff 100644
--- a/arch/arm/mach-xilinx/Makefile
+++ b/arch/arm/mach-xilinx/Makefile
@@ -3,5 +3,5 @@
 #
 
 # Common support
-obj-y 				:= common.o
+obj-y 				:= common.o timer.o
 obj-$(CONFIG_MACH_XILINX_EP107)	+= board_ep107.o
diff --git a/arch/arm/mach-xilinx/timer.c b/arch/arm/mach-xilinx/timer.c
new file mode 100644
index 0000000..b2a72f0
--- /dev/null
+++ b/arch/arm/mach-xilinx/timer.c
@@ -0,0 +1,297 @@
+/* arch/arm/mach-xilinx/timer.c
+ *
+ * This file contains driver for the Xilinx PS Timer Counter IP.
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/xilinx_soc.h>
+#include "common.h"
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+ *
+ * The input frequency to the timer module in silicon will be 200MHz. With the
+ * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
+ */
+#define XTTCPSS_CLOCKSOURCE	0	/* Timer 1 as a generic timekeeping */
+#define XTTCPSS_CLOCKEVENT	1	/* Timer 2 as a clock event */
+
+#define XTTCPSS_TIMER_BASE		TTC0_BASE
+#define XTTCPCC_EVENT_TIMER_IRQ		(IRQ_TIMERCOUNTER0 + 1)
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define XTTCPSS_CLK_CNTRL_OFFSET	0x00 /* Clock Control Reg, RW */
+#define XTTCPSS_CNT_CNTRL_OFFSET	0x0C /* Counter Control Reg, RW */
+#define XTTCPSS_COUNT_VAL_OFFSET	0x18 /* Counter Value Reg, RO */
+#define XTTCPSS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
+#define XTTCPSS_MATCH_1_OFFSET		0x30 /* Match 1 Value Reg, RW */
+#define XTTCPSS_MATCH_2_OFFSET		0x3C /* Match 2 Value Reg, RW */
+#define XTTCPSS_MATCH_3_OFFSET		0x48 /* Match 3 Value Reg, RW */
+#define XTTCPSS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
+#define XTTCPSS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
+
+#define XTTCPSS_CNT_CNTRL_DISABLE_MASK	0x1
+
+/* Setup the timers to use pre-scaling */
+
+#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
+
+/**
+ * struct xttcpss_timer - This definition defines local timer structure
+ *
+ * @base_addr:	Base address of timer
+ **/
+struct xttcpss_timer {
+	void __iomem *base_addr;
+};
+
+static struct xttcpss_timer timers[2];
+static struct clock_event_device xttcpss_clockevent;
+
+/**
+ * xttcpss_set_interval - Set the timer interval value
+ *
+ * @timer:	Pointer to the timer instance
+ * @cycles:	Timer interval ticks
+ **/
+static void xttcpss_set_interval(struct xttcpss_timer *timer,
+					unsigned long cycles)
+{
+	u32 ctrl_reg;
+
+	/* Disable the counter, set the counter value  and re-enable counter */
+	ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+
+	__raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+
+	/* Reset the counter (0x10) so that it starts from 0, one-shot
+	   mode makes this needed for timing to be right. */
+	ctrl_reg |= 0x10;
+	ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq:	IRQ number of the Timer
+ * @dev_id:	void pointer to the xttcpss_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &xttcpss_clockevent;
+	struct xttcpss_timer *timer = dev_id;
+
+	/* Acknowledge the interrupt and call event handler */
+	__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
+			timer->base_addr + XTTCPSS_ISR_OFFSET);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction event_timer_irq = {
+	.name	= "xttcpss clockevent",
+	.flags	= IRQF_DISABLED | IRQF_TIMER,
+	.handler = xttcpss_clock_event_interrupt,
+};
+
+/**
+ * xttcpss_timer_hardware_init - Initialize the timer hardware
+ *
+ * Initialize the hardware to start the clock source, get the clock
+ * event timer ready to use, and hook up the interrupt.
+ **/
+static void __init xttcpss_timer_hardware_init(void)
+{
+	/* Setup the clock source counter to be an incrementing counter
+	 * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+	   it by 32 also. Let it start running now.
+	 */
+	timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
+
+	__raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+				XTTCPSS_IER_OFFSET);
+	__raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+				XTTCPSS_CLK_CNTRL_OFFSET);
+	__raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
+				XTTCPSS_CNT_CNTRL_OFFSET);
+
+	/* Setup the clock event timer to be an interval timer which
+	 * is prescaled by 32 using the interval interrupt. Leave it
+	 * disabled for now.
+	 */
+
+	timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
+
+	__raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
+			XTTCPSS_CNT_CNTRL_OFFSET);
+	__raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
+			XTTCPSS_CLK_CNTRL_OFFSET);
+	__raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
+			XTTCPSS_IER_OFFSET);
+
+	/* Setup IRQ the clock event timer */
+	event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
+	setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
+}
+
+/**
+ * __raw_readl_cycles - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __raw_readl_cycles(struct clocksource *cs)
+{
+	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
+
+	return (cycle_t)__raw_readl(timer->base_addr +
+				XTTCPSS_COUNT_VAL_OFFSET);
+}
+
+
+/*
+ * Instantiate and initialize the clock source structure
+ */
+static struct clocksource clocksource_xttcpss = {
+	.name		= "xttcpss_timer1",
+	.rating		= 200,			/* Reasonable clock source */
+	.read		= __raw_readl_cycles,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/**
+ * xttcpss_set_next_event - Sets the time interval for next event
+ *
+ * @cycles:	Timer interval ticks
+ * @evt:	Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int xttcpss_set_next_event(unsigned long cycles,
+					struct clock_event_device *evt)
+{
+	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+
+	xttcpss_set_interval(timer, cycles);
+	return 0;
+}
+
+/**
+ * xttcpss_set_mode - Sets the mode of timer
+ *
+ * @mode:	Mode to be set
+ * @evt:	Address of clock event instance
+ **/
+static void xttcpss_set_mode(enum clock_event_mode mode,
+					struct clock_event_device *evt)
+{
+	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+	u32 ctrl_reg;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		xttcpss_set_interval(timer, TIMER_RATE / HZ);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		ctrl_reg = __raw_readl(timer->base_addr +
+					XTTCPSS_CNT_CNTRL_OFFSET);
+		ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+		__raw_writel(ctrl_reg,
+				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		ctrl_reg = __raw_readl(timer->base_addr +
+					XTTCPSS_CNT_CNTRL_OFFSET);
+		ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+		__raw_writel(ctrl_reg,
+				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+		break;
+	}
+}
+
+/*
+ * Instantiate and initialize the clock event structure
+ */
+static struct clock_event_device xttcpss_clockevent = {
+	.name		= "xttcpss_timer2",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= xttcpss_set_next_event,
+	.set_mode	= xttcpss_set_mode,
+	.rating		= 200,
+};
+
+/**
+ * xttcpss_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ **/
+static void __init xttcpss_timer_init(void)
+{
+	xttcpss_timer_hardware_init();
+	clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
+
+	/* Calculate the parameters to allow the clockevent to operate using
+	   integer math
+	*/
+	clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
+
+	xttcpss_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
+	xttcpss_clockevent.min_delta_ns =
+		clockevent_delta2ns(1, &xttcpss_clockevent);
+
+	/* Indicate that clock event can be used on any of the CPUs */
+
+	xttcpss_clockevent.cpumask = cpu_all_mask;
+	clockevents_register_device(&xttcpss_clockevent);
+}
+
+/*
+ * Instantiate and initialize the system timer structure
+ */
+struct sys_timer xttcpss_sys_timer = {
+	.init		= xttcpss_timer_init,
+};
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

[PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[John Linn]

These are the minimum needed to build the kernel for the new platform.

Signed-off-by: John Linn <john.linn@xilinx.com>
---

V5 Changes

Minor cleanup based on input from Russell King (uncompress.h.).
Minor cleanup based on input from Jamie Iles (uncompress.h.).
Moved to minimal dependencies on CLOCK_TICK_RATE based on input
	from Arnd.

V4 Changes

Cleanup based on input from Jamie Iles.
	Moved to PLAT_PHYS_OFFSET.
	Remove headers file inclusions that weren't needed.
	Added use of raw_readl/raw_writel in uncompressor uart code.
	Added cpu_relax() in the uncompressor uart code.

V3 Changes

Updates based on Russell Kings' comments
	Changed headers to update the license info and remove
	the address

	Updated the constant to use UL in vmalloc.h

V2 Changes

Updates based on Russell King's comments	
	moved to using entry-macro-gic.S
	moved stuff from hardware.h to xilinx_soc.h 
	added IOMEM() in io.h to help with typing
	Minor updates to IO_SPACE_LIMIT and __io()
	Updated addresses to be clear with seperate virtual
		and physical addresses

 arch/arm/mach-xilinx/include/mach/clkdev.h      |   33 +++++++++++++++
 arch/arm/mach-xilinx/include/mach/debug-macro.S |   36 ++++++++++++++++
 arch/arm/mach-xilinx/include/mach/entry-macro.S |   30 +++++++++++++
 arch/arm/mach-xilinx/include/mach/hardware.h    |   18 ++++++++
 arch/arm/mach-xilinx/include/mach/io.h          |   33 +++++++++++++++
 arch/arm/mach-xilinx/include/mach/irqs.h        |   29 +++++++++++++
 arch/arm/mach-xilinx/include/mach/memory.h      |   23 ++++++++++
 arch/arm/mach-xilinx/include/mach/system.h      |   28 ++++++++++++
 arch/arm/mach-xilinx/include/mach/timex.h       |   23 ++++++++++
 arch/arm/mach-xilinx/include/mach/uart.h        |   25 +++++++++++
 arch/arm/mach-xilinx/include/mach/uncompress.h  |   51 +++++++++++++++++++++++
 arch/arm/mach-xilinx/include/mach/vmalloc.h     |   20 +++++++++
 arch/arm/mach-xilinx/include/mach/xilinx_soc.h  |   48 +++++++++++++++++++++
 13 files changed, 397 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-xilinx/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-xilinx/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-xilinx/include/mach/hardware.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/io.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/irqs.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/memory.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/system.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/timex.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/uart.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/xilinx_soc.h

diff --git a/arch/arm/mach-xilinx/include/mach/clkdev.h b/arch/arm/mach-xilinx/include/mach/clkdev.h
new file mode 100644
index 0000000..5dd1453
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/clkdev.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-xilinx/include/mach/clkdev.h
+ *
+ *  Copyright (C) 2011 Xilinx, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLKDEV_H__
+#define __MACH_CLKDEV_H__
+
+struct clk {
+	unsigned long rate;
+};
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/debug-macro.S b/arch/arm/mach-xilinx/include/mach/debug-macro.S
new file mode 100644
index 0000000..30d3d3d
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* arch/arm/mach-xilinx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/xilinx_soc.h>
+#include <mach/uart.h>
+
+		.macro	addruart, rp, rv
+		ldr	\rp, =LL_UART_PADDR	@ physical
+		ldr	\rv, =LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
+		tst	\rd, #UART_SR_TXFULL		@
+		bne	1002b			@ wait if FIFO is full
+		.endm
diff --git a/arch/arm/mach-xilinx/include/mach/entry-macro.S b/arch/arm/mach-xilinx/include/mach/entry-macro.S
new file mode 100644
index 0000000..11a2866
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-xilinx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * based on arch/plat-mxc/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-gic.S>
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-xilinx/include/mach/hardware.h b/arch/arm/mach-xilinx/include/mach/hardware.h
new file mode 100644
index 0000000..f9685c4
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-xilinx/include/mach/hardware.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_HARDWARE_H__
+#define __MACH_HARDWARE_H__
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/io.h b/arch/arm/mach-xilinx/include/mach/io.h
new file mode 100644
index 0000000..ef69e65
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-xilinx/include/mach/io.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IO_H__
+#define __MACH_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* IO address mapping macros, nothing special at this time but required */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/irqs.h b/arch/arm/mach-xilinx/include/mach/irqs.h
new file mode 100644
index 0000000..47a8162
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/irqs.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-xilinx/include/mach/irqs.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_GPIOS	118
+#define NR_IRQS		(128 + ARCH_NR_GPIOS)
+
+/*
+ * GIC Interrupts
+ */
+
+#define IRQ_GIC_SPI_START	32
+#define IRQ_TIMERCOUNTER0	42
+#define IRQ_UART0		59
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/memory.h b/arch/arm/mach-xilinx/include/mach/memory.h
new file mode 100644
index 0000000..b683b0e
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-xilinx/include/mach/memory.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MEMORY_H__
+#define __MACH_MEMORY_H__
+
+#include <asm/sizes.h>
+
+#define PLAT_PHYS_OFFSET	UL(0x0)
+#define MEM_SIZE		SZ_256M
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/system.h b/arch/arm/mach-xilinx/include/mach/system.h
new file mode 100644
index 0000000..e8514a0
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/system.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-xilinx/include/mach/system.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_SYSTEM_H__
+#define __MACH_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Add architecture specific reset processing here */
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/timex.h b/arch/arm/mach-xilinx/include/mach/timex.h
new file mode 100644
index 0000000..e82e653
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/timex.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-xilinx/include/mach/timex.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_TIMEX_H__
+#define __MACH_TIMEX_H__
+
+/* the following is needed for the system to build but will be removed
+   in the future, the value is not important but won't hurt
+*/
+#define CLOCK_TICK_RATE	(100 * HZ)
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/uart.h b/arch/arm/mach-xilinx/include/mach/uart.h
new file mode 100644
index 0000000..7fca361
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/uart.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-xilinx/include/mach/uart.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UART_H__
+#define __MACH_UART_H__
+
+#define UART_CR_OFFSET          0x00  /* Control Register [8:0] */
+#define UART_SR_OFFSET          0x2C  /* Channel Status [11:0] */
+#define UART_FIFO_OFFSET        0x30  /* FIFO [15:0] or [7:0] */
+
+#define UART_SR_TXFULL		0x00000010	/* TX FIFO full */
+#define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/uncompress.h b/arch/arm/mach-xilinx/include/mach/uncompress.h
new file mode 100644
index 0000000..ef7dd81
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/* arch/arm/mach-xilinx/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H__
+#define __MACH_UNCOMPRESS_H__
+
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <mach/xilinx_soc.h>
+#include <mach/uart.h>
+
+void arch_decomp_setup(void)
+{
+}
+
+static inline void flush(void)
+{
+	/*
+	 * Wait while the FIFO is not empty
+	 */
+	while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+		UART_SR_TXEMPTY))
+		cpu_relax();
+}
+
+#define arch_decomp_wdog()
+
+static void putc(char ch)
+{
+	/*
+	 * Wait for room in the FIFO, then write the char into the FIFO
+	 */
+	while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+		UART_SR_TXFULL)
+		cpu_relax();
+
+	__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/vmalloc.h b/arch/arm/mach-xilinx/include/mach/vmalloc.h
new file mode 100644
index 0000000..aba20a3
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-xilinx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_VMALLOC_H__
+#define __MACH_VMALLOC_H__
+
+#define VMALLOC_END       0xE0000000UL
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/xilinx_soc.h b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
new file mode 100644
index 0000000..d181c5c
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
@@ -0,0 +1,48 @@
+/* arch/arm/mach-xilinx/include/mach/xilinx_soc.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_XILINX_SOC_H__
+#define __MACH_XILINX_SOC_H__
+
+#define PERIPHERAL_CLOCK_RATE		2500000
+
+/* For now, all mappings are flat (physical = virtual)
+ */
+#define UART0_PHYS			0xE0000000
+#define UART0_VIRT			UART0_PHYS
+
+#define TTC0_PHYS			0xF8001000
+#define TTC0_VIRT			TTC0_PHYS
+
+#define PL310_L2CC_PHYS			0xF8F02000
+#define PL310_L2CC_VIRT			PL310_L2CC_PHYS
+
+#define SCU_PERIPH_PHYS			0xF8F00000
+#define SCU_PERIPH_VIRT			SCU_PERIPH_PHYS
+
+/* The following are intended for the devices that are mapped early */
+
+#define TTC0_BASE			IOMEM(TTC0_VIRT)
+#define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
+#define SCU_GIC_CPU_BASE		(SCU_PERIPH_BASE + 0x100)
+#define SCU_GIC_DIST_BASE		(SCU_PERIPH_BASE + 0x1000)
+#define PL310_L2CC_BASE			IOMEM(PL310_L2CC_VIRT)
+
+/*
+ * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
+ */
+#define LL_UART_PADDR	UART0_PHYS
+#define LL_UART_VADDR	UART0_VIRT
+
+#endif
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

Re: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[Arnd Bergmann]

Hi John,

I looked over the latest version of your patches, everything looks
good to me, but I found one problem that you have probably copied
from other platforms:

On Wednesday 30 March 2011, John Linn wrote:
> +
> +/* Allow IO space to be anywhere in the memory */
> +
> +#define IO_SPACE_LIMIT 0xffff
> +
> +/* IO address mapping macros, nothing special at this time but required */
> +
> +#ifdef __ASSEMBLER__
> +#define IOMEM(x)               (x)
> +#else
> +#define IOMEM(x)               ((void __force __iomem *)(x))
> +#endif
> +
> +#define __io(a)                        __typesafe_io(a)
> +#define __mem_pci(a)           (a)

The definition of __io() looks wrong, so any call to inb()/outb()
will be a wild pointer access when you add PCI support.

If you don't plan to support PCI in the future, there should
be no problem.

	Arnd

RE: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[John Linn]

> -----Original Message-----
> From: Arnd Bergmann [mailto:arnd@arndb.de]
> Sent: Wednesday, March 30, 2011 5:45 AM
> To: John Linn
> Cc: linux-arm-kernel@lists.infradead.org;
linux-kernel@vger.kernel.org;
> linux@arm.linux.org.uk; catalin.marinas@arm.com; glikely@secretlab.ca;
> jamie@jamieiles.com
> Subject: Re: [PATCH V5 3/4] ARM: Xilinx: base header files and
assembly
> macros
> 
> Hi John,
> 
> I looked over the latest version of your patches, everything looks
> good to me, but I found one problem that you have probably copied
> from other platforms:

Hi Arnd,

Thanks for taking the time to review again. Yep I did copy from others.

> 
> On Wednesday 30 March 2011, John Linn wrote:
> > +
> > +/* Allow IO space to be anywhere in the memory */
> > +
> > +#define IO_SPACE_LIMIT 0xffff
> > +
> > +/* IO address mapping macros, nothing special at this time but
> required */
> > +
> > +#ifdef __ASSEMBLER__
> > +#define IOMEM(x)               (x)
> > +#else
> > +#define IOMEM(x)               ((void __force __iomem *)(x))
> > +#endif
> > +
> > +#define __io(a)                        __typesafe_io(a)
> > +#define __mem_pci(a)           (a)
> 
> The definition of __io() looks wrong, so any call to inb()/outb()
> will be a wild pointer access when you add PCI support.

Yes that makes sense.  We don't have immediate plans for PCI and 
I was assuming when we add PCI we would need to change that.  

If you think I shouldn't put it off then I'll fix it now.  My 
preference was to get the platform supported, then add more features.

Thanks,
John

> 
> If you don't plan to support PCI in the future, there should
> be no problem.
> 
> 	Arnd


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

Re: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[Arnd Bergmann]

On Wednesday 30 March 2011, John Linn wrote:
> Yes that makes sense.  We don't have immediate plans for PCI and 
> I was assuming when we add PCI we would need to change that.  
> 
> If you think I shouldn't put it off then I'll fix it now.  My 
> preference was to get the platform supported, then add more features.

Getting it fixed properly depends a bit on the PCI implementation.
I've been planning to clean up this part of the ARM architecture
for some time and I can probably do it for one more platform when
I get to it.

My idea for the multiplatform kernel is to have a global I/O space
window (maybe 1 MB) that is in the same location in the virtual
address space all the time, so any platform that wants to support
PCI with direct-mapped I/O space can simply map it in there
at boot time.

	Arnd

RE: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[John Linn]

> -----Original Message-----
> From: Arnd Bergmann [mailto:arnd@arndb.de]
> Sent: Wednesday, March 30, 2011 7:29 AM
> To: John Linn
> Cc: linux-arm-kernel@lists.infradead.org;
linux-kernel@vger.kernel.org;
> linux@arm.linux.org.uk; catalin.marinas@arm.com; glikely@secretlab.ca;
> jamie@jamieiles.com
> Subject: Re: [PATCH V5 3/4] ARM: Xilinx: base header files and
assembly
> macros
> 
> On Wednesday 30 March 2011, John Linn wrote:
> > Yes that makes sense.  We don't have immediate plans for PCI and
> > I was assuming when we add PCI we would need to change that.
> >
> > If you think I shouldn't put it off then I'll fix it now.  My
> > preference was to get the platform supported, then add more
features.
> 
> Getting it fixed properly depends a bit on the PCI implementation.
> I've been planning to clean up this part of the ARM architecture
> for some time and I can probably do it for one more platform when
> I get to it.

Sounds like it's fine to postpone it til we do PCI as I don't know all
the
details of the system yet. Soft logic in FPGAs is great :)

> 
> My idea for the multiplatform kernel is to have a global I/O space
> window (maybe 1 MB) that is in the same location in the virtual
> address space all the time, so any platform that wants to support
> PCI with direct-mapped I/O space can simply map it in there
> at boot time.
> 

Sounds like that will make it easier for everyone and more consistent.

Thanks,
John

> 	Arnd


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

Re: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[Russell King - ARM Linux]

On Wed, Mar 30, 2011 at 03:29:03PM +0200, Arnd Bergmann wrote:
> On Wednesday 30 March 2011, John Linn wrote:
> > Yes that makes sense.  We don't have immediate plans for PCI and 
> > I was assuming when we add PCI we would need to change that.  
> > 
> > If you think I shouldn't put it off then I'll fix it now.  My 
> > preference was to get the platform supported, then add more features.
> 
> Getting it fixed properly depends a bit on the PCI implementation.
> I've been planning to clean up this part of the ARM architecture
> for some time and I can probably do it for one more platform when
> I get to it.
> 
> My idea for the multiplatform kernel is to have a global I/O space
> window (maybe 1 MB) that is in the same location in the virtual
> address space all the time, so any platform that wants to support
> PCI with direct-mapped I/O space can simply map it in there
> at boot time.

And how do you deal with PCMCIA implementations where each socket has
its own separate IO space, each maybe several MB large and may be spread
across several MB of memory with the PCMCIA attribute and PCMCIA memory
spaces interspersed.  Remember that PCMCIA drivers assume PCI/ISA IO
support.

What about platforms which have a real ISA IO space in addition to the
PCMCIA IO spaces?

Things aren't as simple as you'd like them to be, and sometimes changing
this stuff changes userland too (think PCMCIA needing the IO regions
declared to it from userspace during boot.)

Re: [PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[Arnd Bergmann]

On Wednesday 30 March 2011 21:15:06 Russell King - ARM Linux wrote:
> And how do you deal with PCMCIA implementations where each socket has
> its own separate IO space, each maybe several MB large and may be spread
> across several MB of memory with the PCMCIA attribute and PCMCIA memory
> spaces interspersed.  Remember that PCMCIA drivers assume PCI/ISA IO
> support.

I would assume that the majority of implementations uses regular (64KB)
I/O spaces per bus, so within 1 MB, that could fit 16 of them.

> What about platforms which have a real ISA IO space in addition to the
> PCMCIA IO spaces?

I'd do the same as on powerpc: One of them gets registered as the "primary"
bus, which gets the first 64KB. This one is typically the only
one that can support legacy ISA devices with hardcoded I/O port numbers.

Any other bus (PCI, PCMCIA, secondary ISA if needed) can go into one
of the other 15 64KB slots.

> Things aren't as simple as you'd like them to be, and sometimes changing
> this stuff changes userland too (think PCMCIA needing the IO regions
> declared to it from userspace during boot.)

Can you give an example what hardware or driver needs this?

Anyway, the idea is more to have a standard implementation that can be
used by most platforms without causing pain, getting us one step
closer to a multiplatform kernel. If one of the more obscure platforms
doesn't fit, it can still use its own variant and not be part of the
multiplatform configuration. There are a lot of other things needed
before we get there anyway.

	Arnd

[PATCH V5 4/4] ARM: Xilinx: Adding Xilinx platform infrastructure support

[John Linn]

Minimum infrastructure to add the Xilinx machine and allow it to
be selected in the build.

Signed-off-by: John Linn <john.linn@xilinx.com>
---

No updates for V5

V4

Updated to apply against linux-next branch.

No updates for V3

V2 Changes

Updates based on Russell King's comments	
	Cleanup of the Kconfig
	Moved this patch to be last in the patch series

 arch/arm/Kconfig    |   13 +++++++++++++
 arch/arm/Makefile   |    1 +
 arch/arm/mm/Kconfig |    2 +-
 3 files changed, 15 insertions(+), 1 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5e15e6b..3983afa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -891,6 +891,17 @@ config PLAT_SPEAR
 	help
 	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
+config ARCH_XILINX
+	bool "Xilinx ARM Cortex A9 Platform"
+	select CPU_V7
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select CLKDEV_LOOKUP
+	select ARM_GIC
+	select ARM_AMBA
+	help
+	  Support for Xilinx ARM Cortex A9 Platform
+
 endchoice
 
 #
@@ -1025,6 +1036,8 @@ source "arch/arm/mach-vexpress/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-xilinx/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6f7b292..a78ecf2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -197,6 +197,7 @@ machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
+machine-$(CONFIG_ARCH_XILINX)		:= xilinx
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e4509ba..cb0c570 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -813,7 +813,7 @@ config CACHE_L2X0
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
+		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_XILINX
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

[PATCH V5 3/4] ARM: Xilinx: base header files and assembly macros

[John Linn]

These are the minimum needed to build the kernel for the new platform.

Signed-off-by: John Linn <john.linn@xilinx.com>
---

V5 Changes

Minor cleanup based on input from Russell King (uncompress.h.).
Minor cleanup based on input from Jamie Iles (uncompress.h.).
Moved to minimal dependencies on CLOCK_TICK_RATE based on input
	from Arnd.

V4 Changes

Cleanup based on input from Jamie Iles.
	Moved to PLAT_PHYS_OFFSET.
	Remove headers file inclusions that weren't needed.
	Added use of raw_readl/raw_writel in uncompressor uart code.
	Added cpu_relax() in the uncompressor uart code.

V3 Changes

Updates based on Russell Kings' comments
	Changed headers to update the license info and remove
	the address

	Updated the constant to use UL in vmalloc.h

V2 Changes

Updates based on Russell King's comments	
	moved to using entry-macro-gic.S
	moved stuff from hardware.h to xilinx_soc.h 
	added IOMEM() in io.h to help with typing
	Minor updates to IO_SPACE_LIMIT and __io()
	Updated addresses to be clear with seperate virtual
		and physical addresses

 arch/arm/mach-xilinx/include/mach/clkdev.h      |   33 +++++++++++++++
 arch/arm/mach-xilinx/include/mach/debug-macro.S |   36 ++++++++++++++++
 arch/arm/mach-xilinx/include/mach/entry-macro.S |   30 +++++++++++++
 arch/arm/mach-xilinx/include/mach/hardware.h    |   18 ++++++++
 arch/arm/mach-xilinx/include/mach/io.h          |   33 +++++++++++++++
 arch/arm/mach-xilinx/include/mach/irqs.h        |   29 +++++++++++++
 arch/arm/mach-xilinx/include/mach/memory.h      |   23 ++++++++++
 arch/arm/mach-xilinx/include/mach/system.h      |   28 ++++++++++++
 arch/arm/mach-xilinx/include/mach/timex.h       |   23 ++++++++++
 arch/arm/mach-xilinx/include/mach/uart.h        |   25 +++++++++++
 arch/arm/mach-xilinx/include/mach/uncompress.h  |   51 +++++++++++++++++++++++
 arch/arm/mach-xilinx/include/mach/vmalloc.h     |   20 +++++++++
 arch/arm/mach-xilinx/include/mach/xilinx_soc.h  |   48 +++++++++++++++++++++
 13 files changed, 397 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-xilinx/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-xilinx/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-xilinx/include/mach/hardware.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/io.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/irqs.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/memory.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/system.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/timex.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/uart.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-xilinx/include/mach/xilinx_soc.h

diff --git a/arch/arm/mach-xilinx/include/mach/clkdev.h b/arch/arm/mach-xilinx/include/mach/clkdev.h
new file mode 100644
index 0000000..5dd1453
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/clkdev.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-xilinx/include/mach/clkdev.h
+ *
+ *  Copyright (C) 2011 Xilinx, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLKDEV_H__
+#define __MACH_CLKDEV_H__
+
+struct clk {
+	unsigned long rate;
+};
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/debug-macro.S b/arch/arm/mach-xilinx/include/mach/debug-macro.S
new file mode 100644
index 0000000..30d3d3d
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* arch/arm/mach-xilinx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/xilinx_soc.h>
+#include <mach/uart.h>
+
+		.macro	addruart, rp, rv
+		ldr	\rp, =LL_UART_PADDR	@ physical
+		ldr	\rv, =LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
+		tst	\rd, #UART_SR_TXFULL		@
+		bne	1002b			@ wait if FIFO is full
+		.endm
diff --git a/arch/arm/mach-xilinx/include/mach/entry-macro.S b/arch/arm/mach-xilinx/include/mach/entry-macro.S
new file mode 100644
index 0000000..11a2866
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-xilinx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * based on arch/plat-mxc/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-gic.S>
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-xilinx/include/mach/hardware.h b/arch/arm/mach-xilinx/include/mach/hardware.h
new file mode 100644
index 0000000..f9685c4
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-xilinx/include/mach/hardware.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_HARDWARE_H__
+#define __MACH_HARDWARE_H__
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/io.h b/arch/arm/mach-xilinx/include/mach/io.h
new file mode 100644
index 0000000..ef69e65
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-xilinx/include/mach/io.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IO_H__
+#define __MACH_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* IO address mapping macros, nothing special at this time but required */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/irqs.h b/arch/arm/mach-xilinx/include/mach/irqs.h
new file mode 100644
index 0000000..47a8162
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/irqs.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-xilinx/include/mach/irqs.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_GPIOS	118
+#define NR_IRQS		(128 + ARCH_NR_GPIOS)
+
+/*
+ * GIC Interrupts
+ */
+
+#define IRQ_GIC_SPI_START	32
+#define IRQ_TIMERCOUNTER0	42
+#define IRQ_UART0		59
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/memory.h b/arch/arm/mach-xilinx/include/mach/memory.h
new file mode 100644
index 0000000..b683b0e
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-xilinx/include/mach/memory.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MEMORY_H__
+#define __MACH_MEMORY_H__
+
+#include <asm/sizes.h>
+
+#define PLAT_PHYS_OFFSET	UL(0x0)
+#define MEM_SIZE		SZ_256M
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/system.h b/arch/arm/mach-xilinx/include/mach/system.h
new file mode 100644
index 0000000..e8514a0
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/system.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-xilinx/include/mach/system.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_SYSTEM_H__
+#define __MACH_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Add architecture specific reset processing here */
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/timex.h b/arch/arm/mach-xilinx/include/mach/timex.h
new file mode 100644
index 0000000..e82e653
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/timex.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-xilinx/include/mach/timex.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_TIMEX_H__
+#define __MACH_TIMEX_H__
+
+/* the following is needed for the system to build but will be removed
+   in the future, the value is not important but won't hurt
+*/
+#define CLOCK_TICK_RATE	(100 * HZ)
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/uart.h b/arch/arm/mach-xilinx/include/mach/uart.h
new file mode 100644
index 0000000..7fca361
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/uart.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-xilinx/include/mach/uart.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UART_H__
+#define __MACH_UART_H__
+
+#define UART_CR_OFFSET          0x00  /* Control Register [8:0] */
+#define UART_SR_OFFSET          0x2C  /* Channel Status [11:0] */
+#define UART_FIFO_OFFSET        0x30  /* FIFO [15:0] or [7:0] */
+
+#define UART_SR_TXFULL		0x00000010	/* TX FIFO full */
+#define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/uncompress.h b/arch/arm/mach-xilinx/include/mach/uncompress.h
new file mode 100644
index 0000000..ef7dd81
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/* arch/arm/mach-xilinx/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H__
+#define __MACH_UNCOMPRESS_H__
+
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <mach/xilinx_soc.h>
+#include <mach/uart.h>
+
+void arch_decomp_setup(void)
+{
+}
+
+static inline void flush(void)
+{
+	/*
+	 * Wait while the FIFO is not empty
+	 */
+	while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+		UART_SR_TXEMPTY))
+		cpu_relax();
+}
+
+#define arch_decomp_wdog()
+
+static void putc(char ch)
+{
+	/*
+	 * Wait for room in the FIFO, then write the char into the FIFO
+	 */
+	while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
+		UART_SR_TXFULL)
+		cpu_relax();
+
+	__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
+}
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/vmalloc.h b/arch/arm/mach-xilinx/include/mach/vmalloc.h
new file mode 100644
index 0000000..aba20a3
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-xilinx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_VMALLOC_H__
+#define __MACH_VMALLOC_H__
+
+#define VMALLOC_END       0xE0000000UL
+
+#endif
diff --git a/arch/arm/mach-xilinx/include/mach/xilinx_soc.h b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
new file mode 100644
index 0000000..d181c5c
--- /dev/null
+++ b/arch/arm/mach-xilinx/include/mach/xilinx_soc.h
@@ -0,0 +1,48 @@
+/* arch/arm/mach-xilinx/include/mach/xilinx_soc.h
+ *
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_XILINX_SOC_H__
+#define __MACH_XILINX_SOC_H__
+
+#define PERIPHERAL_CLOCK_RATE		2500000
+
+/* For now, all mappings are flat (physical = virtual)
+ */
+#define UART0_PHYS			0xE0000000
+#define UART0_VIRT			UART0_PHYS
+
+#define TTC0_PHYS			0xF8001000
+#define TTC0_VIRT			TTC0_PHYS
+
+#define PL310_L2CC_PHYS			0xF8F02000
+#define PL310_L2CC_VIRT			PL310_L2CC_PHYS
+
+#define SCU_PERIPH_PHYS			0xF8F00000
+#define SCU_PERIPH_VIRT			SCU_PERIPH_PHYS
+
+/* The following are intended for the devices that are mapped early */
+
+#define TTC0_BASE			IOMEM(TTC0_VIRT)
+#define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
+#define SCU_GIC_CPU_BASE		(SCU_PERIPH_BASE + 0x100)
+#define SCU_GIC_DIST_BASE		(SCU_PERIPH_BASE + 0x1000)
+#define PL310_L2CC_BASE			IOMEM(PL310_L2CC_VIRT)
+
+/*
+ * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
+ */
+#define LL_UART_PADDR	UART0_PHYS
+#define LL_UART_VADDR	UART0_VIRT
+
+#endif
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.